Arnd Bergmann [Wed, 13 Nov 2024 23:35:44 +0000 (00:35 +0100)]
Merge tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.13
It contains:
- device tree support for the Microchip SAM9X7 SoC and the Microchip
SAM9X75 Curiosity board
- enable power monitor support for SAM9X60-EK, SAMA5D2-ICP,
SAMA7G45 Curiosity, SAMA7G5-EK boards
- updates the uart nodes with missing properties
- device tree cleanups
* tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
dt-bindings: arm: add sam9x75 curiosity board
ARM: dts: at91: sam9x7: add device tree for SoC
ARM: dts: microchip: Rename LED sub nodes name
ARM: dts: microchip: Rename the pmic node
ARM: dts: microchip: Rename the eeprom nodename
ARM: dts: microchip: sama7g5ek: Add power monitor support
ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
ARM: dts: microchip: sama5d2_icp: Add power monitor support
ARM: dts: microchip: sam9x60ek: Add power monitor support
ARM: dts: microchip: Unify rng node names
ARM: dts: microchip: Add trng labels for all at91 SoCs
ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode
Arnd Bergmann [Tue, 12 Nov 2024 22:02:17 +0000 (23:02 +0100)]
Merge tag 'v6.13-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
More new boards: Rock-5C, Banana Pi P2 Pro
HDMI output enabled on a huge number of rk3588 boards, now that we
have the ability to do that.
A new RK356x variant - the RK3566T (with lower max-frequencies). The
variant was already in use on some boards which then encoded those OPP
differences in the board files itself. This moves this to saner place.
Fixed-regulator nowadays has a preferred node-naming scheme set in the
binding and we had accumulated a number of different styles over time.
A change brings all of them in line for arm64 dts files.
* tag 'v6.13-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits)
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: rockchip: Enable HDMI0 on FriendlyElec CM3588 NAS
arm64: dts: rockchip: add Banana Pi P2 Pro board
dt-bindings: arm: rockchip: add Banana Pi P2 Pro board
arm64: dts: rockchip: Add new SoC dtsi for the RK3566T variant
arm64: dts: rockchip: Prepare RK356x SoC dtsi files for per-variant OPPs
arm64: dts: rockchip: Update CPU OPP voltages in RK356x SoC dtsi
arm64: dts: rockchip: Add OPP voltage ranges to RK3399 OP1 SoC dtsi
...
Arnd Bergmann [Tue, 12 Nov 2024 21:58:06 +0000 (22:58 +0100)]
Merge tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.13 part 2
- Remove accidental suniv duplicates in Makefile
- Add second source magnetometer for Pine Phone
- Add orientation (mount matrix) for Pine Phone's accelerometer and
magnetometer
- Enable eMMC and MMC on A100 Perf1
* tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
arm64: dts: sun50i-a64-pinephone: Add mount-matrix for PinePhone magnetometers
arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone
ARM: dts: allwinner: Remove accidental suniv duplicates
arm64: allwinner: a100: Add MMC related nodes
arm64: dts: allwinner: a100: add usb related nodes
dt-bindings: usb: sunxi-musb: Add A100 compatible string
dt-bindings: usb: Add A100 compatible string
dt-bindings: phy: sun50i-a64: add a100 compatible
arm64: dts: allwinner: a100: add watchdog node
arm64: dts: allwinner: A100: Add PMU mode
ARM: dts: sunxi: add support for RerVision A33-Vstar board
dt-bindings: arm: sunxi: document RerVision A33-Vstar board
arm64: dts: allwinner: Add disable-wp for boards with micro SD card
arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards
arm64: dts: allwinner: h616: Add audio codec node
Arnd Bergmann [Tue, 12 Nov 2024 21:57:19 +0000 (22:57 +0100)]
Merge tag 'riscv-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.13
StarFive:
Support for the DeepComputing FML13V01, a Framework laptop compatible
with a JH7110. This board is fairly different to the more standard SBCs
offerings that the kernel already supports, so there's also some
refactoring of jh7110-common.dtsi to move out nodes unused on the new
board.
Spacemit:
A vendor prefix I grabbed from the basic support series, since its
dependencies are not yet ready but peripheral drivers have started being
merged.
Arnd Bergmann [Tue, 12 Nov 2024 21:56:12 +0000 (22:56 +0100)]
Merge tag 'mvebu-dt-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.13 (part 1)
turris-omnia: prepare device tree for LED brightness change detection
kirkwood: fix at24 EEPROM node name
* tag 'mvebu-dt-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: Add global LED brightness change interrupt
ARM: dts: marvell: kirkwood: Fix at24 EEPROM node name
Arnd Bergmann [Tue, 12 Nov 2024 21:53:47 +0000 (22:53 +0100)]
Merge tag 'stm32-dt-for-v6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.13, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- ST DK board:
- Add support of WLAN/BT Murata Type 1DX module.
- DH SOM:
- Add M24256E EEPROM suport.
- STMP32MP15:
- Use IWDG2 as wakeup source.
- Add support of WLAN/BT Murata Type 1DX module on DK2 board.
- STM32MP25:
- Enable RTC.
- Add DMA support for U(S)ART, I2C and SPI instances.
* tag 'stm32-dt-for-v6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: add DMA support on SPI instances of stm32mp25
arm64: dts: st: add DMA support on I2C instances of stm32mp25
arm64: dts: st: add DMA support on U(S)ART instances of stm32mp25
arm64: dts: st: add RNG node on stm32mp251
arm64: dts: st: enable RTC on stm32mp257f-ev1 board
arm64: dts: st: add RTC on stm32mp25x
ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk
ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
ARM: dts: stm32: Describe M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT
ARM: dts: stm32: Add IWDG2 EXTI interrupt mapping and mark as wakeup source
Arnd Bergmann [Tue, 12 Nov 2024 21:52:29 +0000 (22:52 +0100)]
Merge tag 'ti-k3-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.13
Generic Fixups/Cleanups:
- Cleanup bootph-* tags to limit to leaf nodes only
- clock IDs for MCSPI instances fixed up across J7xx family
- Misc indentation and whitespace cleanup across dts
New SoC
- J742s2 which is a cutdown of existing J784s4 and uses same EVM
SoC Specific features and Fixes:
- eQEP (counter) support across AM64/AM62/AM62A
AM64
- M4F Remoteproc support
- stats collection support for ICSSGs via ti,pa-stats
- Add PCIe EP overlays
AM65
- stats collection support for ICSSGs via ti,pa-stats
AM62:
- M4F Remoteproc support
- eMMC/SD TAP value updates
- dtbs_check fixes for opp_efuse_table
AM62A
- 1.4GHz opp entry
AM62P
- 1.4GHz opp entry
J7200
- Add PCIe EP overlays
- Pinmux node reg range fixes
Board Specific
AM62
- am62 verdin ivy carrier board support
- am625-verdin TPM device support
- am62 verdin ivy board support
- Beagleplay Mikrobus PWM header support
- am62-verdin increase SD regulator startup delay
AM64
- am642-phyboard-electra-rdk trickle charger support
- am64-phy* drop buswidth from sdhci nodes
Arnd Bergmann [Tue, 12 Nov 2024 21:48:14 +0000 (22:48 +0100)]
Merge tag 'riscv-sophgo-dt-for-v6.13' of https://github.com/sophgo/linux into soc/dt
RISC-V Devicetrees for v6.13
Sophgo:
Add pinctrl support for CV1800B & CV1812H.
Add SARADC support for CV1800B.
Add initial LicheeRV-Nano/SG2002.
Add emmc/sdio support for Huashan-Pi/CV1812H.
Add power-key support for PioneerBox/SG2042.
Signed-off-by: Chen Wang <[email protected]>
* tag 'riscv-sophgo-dt-for-v6.13' of https://github.com/sophgo/linux:
riscv: dts: sophgo: Add emmc support for Huashan Pi
riscv: dts: sophgo: Add sdio configuration for Huashan Pi
riscv: dts: sophgo: fix pinctrl base-address
riscv: sophgo: dts: add power key for pioneer box
riscv: dts: sophgo: Add SARADC description for Sophgo CV1800B
riscv: dts: sophgo: Add LicheeRV Nano board device tree
riscv: dts: sophgo: Add initial SG2002 SoC device tree
riscv: dts: sophgo: cv1812h: add pinctrl support
riscv: dts: sophgo: cv1800b: add pinctrl support
Arnd Bergmann [Tue, 12 Nov 2024 21:45:36 +0000 (22:45 +0100)]
Merge tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree changes for v6.13
Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G,
X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride"
development boards thereon, and the SM7325 platform and the Nothing
Phone 1.
MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for
volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi
calibration variant.
On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while
the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2
enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins
are adjusted and PMU nodes' compatibles for the two clusters are
corrected.
The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to
DeviceTree overlays, and both gains CMA heap for libcamera to use.
SA8775P gains GPI DMA support, support for controlling download mode
(bootloader-assisted ramdump support), additional UARTs, and qcrypto
support. The "Ride" development board gains WiFi and Bluetooth support.
On SC8280XP (8cx Gen3) another UART is described, used in the
Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit
is described on the CRD and Lenovo ThinkPad X13s.
On SDM630/660 the GPU SMMU and clock controller is added, as is the
A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and
WiFi is then enabled on the Inforce 6560 development board.
On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable
WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC
controller, to enable hotplug.
On X Elite, USB Type-C controllers are marked as usb-role-switch
capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and
wired up to allow setting and cleaning the download mode
(bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are
updated.
USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook
S15. The T14s also gains support for a second source trackpad. The
Microsoft Surface Laptop gains LID switch and the USB Type-A connector
attached to the multiport controller is enabled. The CRD has its HID
device power supplies described.
Application SMMU is flagged as DMA coherent across QDU1000, SC7180,
SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100.
In addition to this, the effort to improve style and binding compliance
continued.
* tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a
arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-crd: enable bluetooth
arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards
dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3
arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers
arm64: dts: qcom: x1e80100-crd: describe HID supplies
arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variant
arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown
arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button
arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI
arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen
arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
...
Arnd Bergmann [Tue, 12 Nov 2024 21:42:35 +0000 (22:42 +0100)]
Merge tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Arnd Bergmann [Tue, 12 Nov 2024 21:41:15 +0000 (22:41 +0100)]
Merge tag 'mtk-dts64-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.13
MT8195 (also called MT8395)
- Enabled GPU support on Genio 1200 EVK
- Added sound-dai-cells for audio codec on MT8195 Cherry Chromebooks
MT8192:
- Added support Asurada Chromebook variants with Synaptics trackpad
MT8188 (also called MT8390):
- Added support for CPU DVFS, IOMMU, PWM hardware, SPMI bus,
Audio, socinfo, PCI-Express, DisplayPort, MIPI DSI, Ethernet,
Video HW Encoders (Stateful) and HW Decoders (Stateless),
JPEG HW Encoder/Decoder.
- Enabled GPU support on Genio 700 EVK
MT8183:
- Added support for Video HW Encoders (Stateful)
- Added HDMI support on MT8183 Pumpkin board
- Fixed some regulators to provide the actual description of the
power rails in MT8183 Kukui Chromebooks
- Disabled DPI display interface on MT8183 Kukui Chromebooks
to fix internal display probing
- Fixed address of EEPROM found on MT8183 Kakadu/Kodama Chromebooks
- Added SCL internal delay on I2C2 bus for improved I2C-HID devices
reliability on MT8183 Jacuzzi Chromebooks
MT7988:
- Added support for eFuses and UART controllers
Plus, addition of OF Graph support in MediaTek MMSYS and some cleanups
and dtbs_check fixes for MT8195 and for all machines using the MT6358
PMIC.
Arnd Bergmann [Tue, 12 Nov 2024 21:39:16 +0000 (22:39 +0100)]
Merge tag 'imx-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.13:
- New device support: Boundary Device Nitrogen8MP, Kontron OSM-S i.MX8MP
SoM and BL carrier board, Verdin Ivy carrier board, DHCOM SoM on DRC02
and PicoITX, Gateworks GW82XX-2X, etc.
- A series from Carlos Song to add LPSPI alias for i.MX8 and i.MX9 SoCs
- A couple of changes from Ciprian Marian Costea to improve S32G uSDHC
and SD/eMMC support
- A couple of changes from Francesco Dolcini to improve SD regulator
startup delay for Verdin devices
- A bunch of changes from Frank Li to add I3C overlay for imx93-9x9-qsb,
enable PCIe and SATA for imx8qm-mek, add various devices for imx8qxp-mek,
fix dt-schema warnings, etc.
- A series from João Paulo Gonçalves to improve i.MX8 Apalis and i.MX8M
Verdin board support
- A set of changes from Laurentiu Mihalcea to enable dsp node for rproc
usage in audio subsystem
- A set of changes from Peng Fan to improve i.MX95 support, adding SCMI,
thermal zone, cooling device, idle states, etc.
- A series from Richard Zhu to add PCIe and SATA support for imx8dxl-evk
- A series from Shengjiu Wang to enable audio features on imx93-9x9-qsb
and imx8ulp-evk board
- Other small and random changes
* tag 'imx-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (92 commits)
arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delay
arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delay
arm64: dts: imx8mp-verdin: add single-master property to all i2c nodes
arm64: dts: imx8mm-verdin: add single-master property to all i2c nodes
arm64: dts: imx95: Add missing vendor string to SCMI property
arm64: dts: imx8mp-navqp: Add HDMI support
arm64: dts: imx8qm-ss-hsio: fix PCI and SATA clock indices
arm64: dts: imx8qm-ss-hsio: fix interrupt-map indent under pci* nodes
arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0
arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO
arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor compatible string
arm64: dts: imx8mp-kontron-dl: change touchscreen power-supply to AVDD28-supply
arm64: dts: imx8mp: Add Boundary Device Nitrogen8MP Universal SMARC Carrier Board
arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm mba8mx board file
arm64: dts: mba8mx: remove undocumented 'data-lanes' at panel
arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support
arm64: dts: imx8ulp-evk: Add spdif sound card support
arm64: dts: imx8ulp-evk: Add bt-sco sound card support
arm64: dts: imx8ulp: Add audio device nodes
arm64: dts: imx8qm-mek: enable dsp node for rproc usage
...
Arnd Bergmann [Tue, 12 Nov 2024 21:38:03 +0000 (22:38 +0100)]
Merge tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
* tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits)
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: dts: imx6sll: Improve gpc description
ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells
ARM: dts: imx6sx: Fix tempmon description
ARM: dts: imx6sll: Remove regulator-3p0 unit address
ARM: dts: imx6sll: Fix the last SPDIF clock name
ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl: Remove incorrect mmc fallback compatible
ARM: dts: imx6sx: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback
ARM: dts: imx6ul: Drop duplicate space in iomux node groups
ARM: dts: imx6sx: Align pin config nodes with bindings
ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings
ARM: dts: imx6qp: Align pin config nodes with bindings
ARM: dts: imx6qdl: Align pin config nodes with bindings
ARM: dts: imx6q: Align pin config nodes with bindings
ARM: dts: imx6dl: Align pin config nodes with bindings
ARM: dts: imx53: Align pin config nodes with bindings
ARM: dts: imx51: Align pin config nodes with bindings
ARM: dts: imx50: Align pin config nodes with bindings
...
Arnd Bergmann [Tue, 12 Nov 2024 21:37:36 +0000 (22:37 +0100)]
Merge tag 'imx-bindings-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.13:
- Add vendor prefix for ComVetia AG
- Add new board compatibles for Kobo Clara 2E, Boundary Device Nitrogen8MP,
Comvetia LXR, Kontron i.MX8MP OSM-S, Verdin i.MX8MM/P Ivy, DH Electronics
DHCOM, IOTA2 Lumpy, Gateworks GW82XX-2x
- A couple changes from Fabio Estevam to improve imx-anatop and imx-gpc
bindings
- A fsl,dsp bindings update from Laurentiu Mihalcea to correct power domain
count
* tag 'imx-bindings-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E
dt-bindings: power: fsl,imx-gpc: Document fsl,imx6sll-gpc
dt-bindings: soc: imx: fsl,imx-anatop: Add additional regulators
dt-bindings: soc: imx: fsl,imx-anatop: Fix the i.MX7 irq number
dt-bindings: arm: fsl: Add Boundary Device Nitrogen8MP Universal SMARC Carrier Board
dt-bindings: arm: fsl: Add Gateworks GW82XX-2x dev kit
dt-bindings: dsp: fsl,dsp: fix power domain count
dt-bindings: arm: fsl: Document i.MX6DL DHCOM SoM on PDK2 carrier board
dt-bindings: arm: fsl: Document DH electronics i.MX8M Plus DHCOM PicoITX
dt-bindings: arm: fsl: Document DH i.MX8MP DHCOM SoM on DRC02 carrier board
dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
dt-bindings: arm: freescale: Add verdin imx8mp ivy board
dt-bindings: arm: freescale: Add verdin imx8mm ivy board
dt-bindings: arm: fsl: Document the Comvetia LXR board
dt-bindings: vendor-prefixes: Add an entry for ComVetia AG
dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
Arnd Bergmann [Tue, 12 Nov 2024 21:36:51 +0000 (22:36 +0100)]
Merge tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
* tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq4019: use nvmem-layout
ARM: dts: qcom: change labels to lower-case
ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: minor whitespace cleanup
ARM: dts: qcom: drop underscore in node names
Arnd Bergmann [Tue, 12 Nov 2024 21:35:11 +0000 (22:35 +0100)]
Merge tag 'zynqmp-dt-for-6.13' of https://github.com/Xilinx/linux-xlnx into soc/dt
arm64: ZynqMP DT changes for 6.13
- Enable AMS for all boards including HWMON
- Add thermal zones
* tag 'zynqmp-dt-for-6.13' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add thermal zones
arm64: zynqmp: Expose AMS to userspace as HWMON
arm64: zynqmp: Enable AMS for all boards
Arnd Bergmann [Tue, 12 Nov 2024 21:32:05 +0000 (22:32 +0100)]
Merge tag 'v6.13-armsoc/dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoCs: basic RK3528 support, RK3399S - a variant made specifically
for the Pinephone Pro and for consistencies sake it gets its own SoC
dtsi to not hide the specifics in the Pinephone Pro devicetree.
New boards: OrangePi-5b, NanoPi R3S, ArmSom Sige 5 (first rk3576 board),
Radxa e20c (first rk3528 board), Powkiddy RGB20SX, RK3588S-EVB1 and
the ArmSoM LM7 SoM with W3 carrier board.
HDMI support for rk3588 brings the first graphical output capability
there. This includes of course needed changes to a number of boards.
And finally a bunch of newly enabled peripherals on different boards,
as well as changes to adhere better to bindings and removal/change of
deprecated properties.
* tag 'v6.13-armsoc/dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits)
arm64: dts: rockchip: Add rk3588-orangepi-5b device tree
dt-bindings: arm: rockchip: Add Orange Pi 5b enum to Orange Pi 5 entry
arm64: dts: rockchip: refactor common Orange Pi 5 board
arm64: dts: rockchip: Remove 'enable-active-low' from two boards
arm64: dts: rockchip: add HDMI support to rk3588-jaguar
arm64: dts: rockchip: add HDMI support to rk3588-tiger-haikou
arm64: dts: rockchip: add HDMI pinctrl to rk3588-tiger SoM
arm64: dts: rockchip: reorder mmc aliases for NanoPi R3S
arm64: dts: rockchip: enable eMMC HS200 mode for NanoPi R3S
arm64: dts: rockchip: sort props in pmu_io_domains node for NanoPi R3S
arm64: dts: rockchip: replace deprecated snps,reset props for NanoPi R3S
arm64: dts: rockchip: fix model name for FriendlyElec NanoPi R3S
arm64: dts: rockchip: Enable HDMI0 on rock-5a
arm64: dts: rockchip: Enable HDMI0 on rk3588-nanopc-t6
arm64: dts: rockchip: pwm-leds for Orange Pi 5
arm64: dts: rockchip: reorder audio/hdmi nodes in Orange Pi 5
arm64: dts: rockchip: analog audio on Orange Pi 5
arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
arm64: dts: rockchip: Convert dts files used as parents to dtsi files
arm64: dts: rockchip: fix the pcie refclock oscillator on Rock 5 ITX
...
Arnd Bergmann [Tue, 12 Nov 2024 21:30:58 +0000 (22:30 +0100)]
Merge tag 'samsung-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.13
1. Add new SoC Samsung Exynos8895 and new board using it: Samsung
Galaxy S8 (SM-G950F) mobile phone. Only small support so far:
CPUs (Samsung Mongoose M2), main clock controllers (FSYS, PERIC,
TOP), pin controllers, SPI for cameras, timers.
2. Add new SoC Samsung Exynos990 and new board using it: Samsung
Galaxy Note20 5G (c1s/SM-N981B) mobile phone. Only minimal support
so far: CPUs (Samsung Mongoose M5), pin controllers, timers.
3. Prepare for adding new SoC Samsung Exynos9810 - add bindings. The
SoC DTSI was not yet ready, but it is posted on the mailing lists so
should come soon.
4. ExynosAutov920: Add several clock controllers.
* tag 'samsung-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding
dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible
dt-bindings: arm: cpus: Add Samsung Mongoose M3
arm64: dts: exynos8895: Add spi_0/1 nodes
arm64: dts: exynos8895: Add Multi Core Timer (MCT) node
arm64: dts: exynos8895: Add clock management unit nodes
dt-bindings: timer: exynos4210-mct: Add samsung,exynos8895-mct compatible
dt-bindings: clock: samsung: Add Exynos8895 SoC
arm64: dts: exynos: Add initial support for Samsung Galaxy Note20 5G (c1s)
arm64: dts: exynos: Add initial support for the Exynos 990 SoC
dt-bindings: arm: samsung: samsung-boards: Add bindings for Exynos 990 boards
dt-bindings: arm: cpus: Add Samsung Mongoose M5
arm64: dts: exynosautov920: add peric1, misc and hsi0/1 clock DT nodes
dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions
arm64: dts: exynos: Add initial support for Samsung Galaxy S8
arm64: dts: exynos: Add initial support for exynos8895 SoC
dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible
dt-bindings: arm: samsung: Document dreamlte board binding
dt-bindings: arm: cpus: Add Samsung Mongoose M2
Arnd Bergmann [Tue, 12 Nov 2024 21:29:28 +0000 (22:29 +0100)]
Merge tag 'tegra-for-6.13-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.13-rc1
Changes in this batch add an device tree file for the industrial module
version of the Jetson AGX Orin Developer Kit. There are also some fixes
for the Jetson TX1 and new features such as touchscreen, temperature
sensor and USB-C extcon support for Smaug (a.k.a. Pixel C).
* tag 'tegra-for-6.13-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: smaug: Declare cros-ec extcon
arm64: tegra: Add SDMMC sdr104-offsets for Tegra X1
arm64: dts: nvidia: tegra210-smaug: Add TMP451 temperature sensor node
arm64: dts: nvidia: tegra210-smaug: Add touchscreen node
arm64: tegra: p2180: Add mandatory compatible for WiFi node
arm64: tegra: Create SKU8 AGX Orin board file
Arnd Bergmann [Tue, 12 Nov 2024 21:28:08 +0000 (22:28 +0100)]
Merge tag 'ux500-dts-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Ux500 DTS file updates for the v6.13 kernel cycle:
- Add touchkeys to the Samsung Codina variants
- Re-work the Codina device tree for eMMC
* tag 'ux500-dts-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Reconfigure the MC2 eMMC interface
ARM: dts: ux500: Add touchkeys to Codinas
Arnd Bergmann [Tue, 12 Nov 2024 21:27:33 +0000 (22:27 +0100)]
Merge tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Arnd Bergmann [Tue, 12 Nov 2024 21:26:17 +0000 (22:26 +0100)]
Merge tag 'thead-dt-for-v6.13-p2' of https://github.com/pdp7/linux into soc/dt
T-HEAD Devicetrees for v6.13, part 2
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the TH1520 SoC-based BeagleV Ahead and Sipeed Lichee Pi 4a boards.
The dwmac-thead driver and dt binding have been accepted by netdev and
are in linux-next as well as the dts patch in this pull request. I have
tested next-20241108 on the Ahead and LPi4a boards, and Ethernet works
correctly.
Signed-off-by: Drew Fustini <[email protected]>
* tag 'thead-dt-for-v6.13-p2' of https://github.com/pdp7/linux:
riscv: dts: thead: Add TH1520 ethernet nodes
Arnd Bergmann [Tue, 12 Nov 2024 21:25:27 +0000 (22:25 +0100)]
Merge tag 'thead-dt-for-v6.13' of https://github.com/pdp7/linux into soc/dt
T-HEAD Devicetrees for v6.13
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC. The
yaml binding and pinctrl-th1520 driver has been merged into next by
Linus W and will be included in the 6.13 pinctrl PR.
The TH1520 GPIO controllers are already supported by the gpio-dwapb
driver. This PR improves GPIO support by adding GPIO ranges and GPIO
line names for the BeagleV Ahead and LicheePi 4A boards. Support is
added for the built-in LEDs on the Ahead board.
FUKAUMI Naoki [Mon, 21 Oct 2024 09:05:47 +0000 (09:05 +0000)]
arm64: dts: rockchip: add Radxa ROCK 5C
Radxa ROCK 5C is a 8K computer for everything[1] using the Rockchip
RK3588S2 chip:
- Rockchip RK3588S2
- Quad A76 and Quad A55 CPU
- 6 TOPS NPU
- up to 32GB LPDDR4x RAM
- eMMC / SPI flash connector
- Micro SD Card slot
- Gigabit ethernet port (supports PoE with add-on PoE HAT)
- WiFi6 / BT5.4
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST port
- 1x USB Type-C 5V power port
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
The way InvenSense MPU-6050 accelerometer is mounted on the user-facing side
of the Pine64 PinePhone mainboard, which makes it rotated 90 degrees counter-
clockwise, [1] requires the accelerometer's x- and y-axis to be swapped, and
the direction of the accelerometer's y-axis to be inverted.
Rectify this by adding a mount-matrix to the accelerometer definition in the
Pine64 PinePhone dtsi file.
Dragan Simic [Sat, 2 Nov 2024 03:09:01 +0000 (04:09 +0100)]
arm64: dts: rockchip: Add new SoC dtsi for the RK3566T variant
Add new SoC dtsi file for the RK3566T variant of the Rockchip RK3566 SoC.
The difference between the RK3566T variant and the "full-fat" RK3566 variant
is in fewer supported CPU and GPU OPPs on the RK3566T, and in the absence of
a functional NPU, which we currently don't have to worry about.
Examples of the boards based on the RK3566T include the Pine64 Quartz64 Zero
SBC, [1] which is yet to be supported, the Radxa ROCK 3C, and the Radxa ZERO
3E/3W SBCs, which are both already supported. Though, Radxa doesn't mention
the use of RK3566T officially, but its official SBC specifications do state
that the maximum frequency for the Cortex-A55 cores on those SBCs is lower
than the "full-fat" RK3566's 1.8 GHz, which makes spotting the presence of
the RK3566T SoC variant rather easy. [2][3][4] An additional, helpful cue
is that Radxa handles the CPU and GPU OPPs for the RK3566T variant separately
in its downstream kernel source. [5]
The CPU and GPU OPPs supported on the RK3566T SoC variant are taken from the
vendor kernel source, [6] which uses the values of the "opp-supported-hw" OPP
properties to determine which ones are supported on a particular SoC variant.
The actual values of the "opp-supported-hw" properties make it rather easy
to see what OPPs are supported on the RK3566T SoC variant, but that, rather
unfortunately, clashes with the maximum frequencies advertised officially
for the Cortex-A55 CPU cores on the above-mentioned SBCs. [1][2][3][4] The
vendor kernel source indicates that the maximum frequency for the CPU cores
is 1.4 GHz, while the SBC specifications state that to be 1.6 GHz. Until
that discrepancy is resolved somehow, let's take the safe approach and use
the lower maximum frequency for the CPU cores.
Update the dts files of the currently supported RK3566T-based boards to use
the new SoC dtsi for the RK3566T variant. This actually takes the CPU cores
and the GPUs found on these boards out of their earlier overclocks, but it
also means that the officially advertised specifications [1][2][3][4] of the
highest supported frequencies for the Cortex-A55 CPU cores on these boards
may actually be wrong, as already explained above.
The correctness of the introduced changes was validated by decompiling and
comparing all affected board dtb files before and after these changes.
Rename the Rockchip RK356x SoC dtsi files and, consequently, adjust their
contents appropriately, to prepare them for the ability to specify different
CPU and GPU OPPs for each of the supported RK356x SoC variants.
The first new RK356x SoC variant to be introduced is the RK3566T, which the
Pine64 Quartz64 Zero SBC is officially based on. [1] Some other SBCs are
also based on the RK3566T variant, including Radxa ROCK 3C and ZERO 3E/3W,
but the slight trouble is that Radxa doesn't state that officially. Though,
it's rather easy to spot the RK3566T on such boards, because their official
specifications state that the maximum frequency for the Cortex-A55 cores is
lower than the "full-fat" RK3566's 1.8 GHz. [2][3][4]
These changes follow the approach used for the Rockchip RK3588 SoC variants,
which was introduced and described further in commit def88eb4d836 ("arm64:
dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs"). Please
see that commit for a more detailed explanation.
No functional changes are introduced, which was validated by decompiling and
comparing all affected board dtb files before and after these changes. In
more detail, the affected dtb files have some of their blocks shuffled around
a bit and some of their phandles have different values, as a result of the
changes to the order in which the building blocks from the parent dtsi files
are included, but they effectively remain the same as the originals.
As a side note, due to the nature of introduced changes, this commit is a bit
more readable when viewed using the --break-rewrites option for git-log(1).
Dragan Simic [Sat, 2 Nov 2024 03:08:59 +0000 (04:08 +0100)]
arm64: dts: rockchip: Update CPU OPP voltages in RK356x SoC dtsi
Update the lower/upper voltage limits and the exact voltages for the Rockchip
RK356x CPU OPPs, using the most conservative values (i.e. the highest per-OPP
voltages) found in the vendor kernel source. [1]
Using the most conservative per-OPP voltages ensures reliable CPU operation
regardless of the actual CPU binning, with the downside of possibly using
a bit more power for the CPU cores than absolutely needed.
Additionally, fill in the missing "clock-latency-ns" CPU OPP properties, using
the values found in the vendor kernel source. [1]
Dragan Simic [Wed, 6 Nov 2024 08:33:08 +0000 (09:33 +0100)]
arm64: dts: rockchip: Add OPP voltage ranges to RK3399 OP1 SoC dtsi
Add support for voltage ranges to the CPU, GPU and DMC OPPs defined in the
SoC dtsi for Rockchip OP1, as a variant of the Rockchip RK3399. This may be
useful if there are any OP1-based boards whose associated voltage regulators
are unable to deliver the exact voltages; otherwise, it causes no functional
changes to the resulting OPP voltages at runtime.
These changes cannot cause stability issues or any kind of damage, because
it's perfectly safe to use the highest voltage from an OPP group for each OPP
in the same group. The only possible negative effect of using higher voltages
is wasted energy in form of some additionally generated heat.
Chris Morgan [Thu, 31 Oct 2024 15:05:03 +0000 (10:05 -0500)]
arm64: dts: rockchip: correct analog audio name on Indiedroid Nova
Correct the audio name for the Indiedroid Nova from
rockchip,es8388-codec to rockchip,es8388. This name change corrects a
kernel log error of "ASoC: driver name too long 'rockchip,es8388-codec'
-> 'rockchip_es8388'".
arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone
New batches of PinePhones switched the magnetometer to AF8133J from
LIS3MDL because lack of ST components.
Both chips use the same PB1 pin, but in different modes.
LIS3MDL uses it as an gpio input to handle interrupt.
AF8133J uses it as an gpio output as a reset signal.
It wasn't possible at runtime to enable both device tree nodes and
detect supported sensor at probe time, because both drivers try to
acquire the same gpio in different modes.
Device tree fixup will be done in firmware without introducing new board
revision and new dts.
Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove these duplicates for code cleanness.
arm64: dts: marvell: Drop undocumented SATA phy names
While "phy-names" is allowed for sata-port nodes, the names used aren't
documented and are incorrect ("sata-phy" is what's documented). The name
for a single entry is fairly useless, so just drop the property.
Andreas Kemnade [Sun, 15 Sep 2024 19:35:27 +0000 (21:35 +0200)]
ARM: dts: omap4-kc1: fix twl6030 power node
dtbs_check was moaning about twl6030-power, use the standard property
instead.
Apparently that twl6030 power snippet slipped in without the
corresponding driver. Now it is handled by the standard property.
ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms
Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:
SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5
On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate. It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms. As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms. Considering the
typical tolerance of 20% on capacitors, 40ms would be safer. Add an
additional safety margin and settle for 50ms.
Marek Behún [Mon, 4 Nov 2024 14:19:24 +0000 (15:19 +0100)]
ARM: dts: turris-omnia: Add global LED brightness change interrupt
When global LED brightness is changed by pressing the front button on
Turris Omnia, the MCU can produce an interrupt to the CPU. Add the
description of this interrupt to the LED controller node.
Dhruva Gole [Mon, 4 Nov 2024 06:37:08 +0000 (12:07 +0530)]
arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon
Add another entry in the wkup_conf for the syscon node, and then use
that for the syscon in opp-table.
Marking entire wkup_conf as "syscon", "simple-mfd" is wrong and needs to
be addressed similar to how other child-nodes in wkup_conf are implemented
in the same file.
Chen-Yu Tsai [Wed, 30 Oct 2024 07:02:23 +0000 (15:02 +0800)]
arm64: dts: mediatek: mt8183-kukui: Drop bogus fixed regulators
A couple of the fixed regulators in the Kukui dtsi do not actually
exist in the hardware design; they are simply power rails connected
together with 0 ohm bridges.
Drop them and assign their upstream supplies to their consumers instead.
Chen-Yu Tsai [Wed, 30 Oct 2024 07:02:22 +0000 (15:02 +0800)]
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators
When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.
Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.
Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator':
Error message is:
pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the
regexes: 'pinctrl-[0-9]+'.
Rename these two device node to generic 'audio-codec' and 'regulators'.
Chen-Yu Tsai [Tue, 29 Oct 2024 10:02:25 +0000 (18:02 +0800)]
arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity
The reset line of the IT6505 bridge chip is active low, not active high.
It was incorrectly inverted in the device tree as the implementation at
the time incorrectly inverted the polarity in its driver, due to a prior
device having an inline inverting level shifter.
Fix the polarity now while the external display pipeline is incomplete,
thereby avoiding any impact to running systems.
A matching fix for the driver should be included if this change is
backported.
arm64: dts: imx8mp-verdin: add single-master property to all i2c nodes
By default we expect all i2c nodes to be single-master, we do not have
any module or carrier board that uses multi-master mode on any i2c
controller. With this property set, we benefit from optimisations made
exclusively for single-masters.
arm64: dts: imx8mm-verdin: add single-master property to all i2c nodes
By default we expect all i2c nodes to be single-master, we do not have
any module or carrier board that uses multi-master mode on any i2c
controller. With this property set, we benefit from optimisations made
exclusively for single-masters.
Alexander Stein [Wed, 30 Oct 2024 09:55:51 +0000 (10:55 +0100)]
arm64: dts: imx95: Add missing vendor string to SCMI property
With commit 7bf46ec090b9e ("dt-bindings: firmware: arm,scmi: Add missing
vendor string") this property has 'arm' vendor prefix. Fix the property
name accordingly.
Fixes: 61ed94cd54e3 ("arm64: dts: imx95: set max-rx-timeout-ms") Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Frank Li [Fri, 25 Oct 2024 22:08:10 +0000 (18:08 -0400)]
arm64: dts: imx8qm-ss-hsio: fix PCI and SATA clock indices
The first argument of lpcg should indices, instead of index. Fix it by
use predefined macro.
Fixes: 9f7053f67c8a ("arm64: dts: imx8-ss-hsio: Add PCIe and SATA support") Signed-off-by: Frank Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Frank Li [Wed, 23 Oct 2024 21:03:13 +0000 (17:03 -0400)]
arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO
Fix the issue where both 'output-low' and 'output-high' exist under GPIO
hog nodes (rst_usb_hub_hog and sel_usb_hub_hog) when applying device
tree overlays. Since /delete-property/ is not supported in the overlays,
setting 'output-low' results in both properties being present. The
workaround is to disable these hogs and create new ones with 'output-low'
as needed.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtb: sel-usb-hub-hog:
{'output-low': True, 'gpio-hog': True, 'gpios': [[1, 0]], 'output-high': True, 'phandle': 108, '$nodename': ['sel-usb-hub-hog']}
is valid under each of {'required': ['output-low']}, {'required': ['output-high']
Fixes: 3f6fc30abebc ("arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay") Signed-off-by: Frank Li <[email protected]> Reviewed-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Frank Li [Wed, 23 Oct 2024 20:11:28 +0000 (16:11 -0400)]
arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor compatible string
In jedec,spi-nor.yaml:
SPI NOR flashes compatible with the JEDEC SFDP standard or which may be
identified with the READ ID opcode (0x9F) do not deserve a specific
compatible. They should instead only be matched against the generic
"jedec,spi-nor" compatible.
en25s64 already in drivers/mtd/spi-nor/eon.c. So remove it safely and fix
below warning:
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: flash@2: compatible: 'oneOf' conditional failed, one must be fixed:
['en25s64', 'jedec,spi-nor'] is too long
Frank Li [Wed, 23 Oct 2024 15:26:36 +0000 (11:26 -0400)]
arm64: dts: imx8mp-kontron-dl: change touchscreen power-supply to AVDD28-supply
Update the touchscreen power-supply from 'power-supply' to 'AVDD28-supply' and
'VDDIO-supply' as per the binding documentation in goodix.yaml.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtb: touchscreen@5d:
'power-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml
Frank Li [Tue, 22 Oct 2024 22:04:29 +0000 (18:04 -0400)]
arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm mba8mx board file
Move 'samsung,burst-clock-frequency' and 'samsung,esc-clock-frequency'
properties to i.MX8MN and i.MX8MM mba8mx board file. These properties are
not applicable to i.MX8MQ MIPI DSI, which uses the compatible string
'fsl,imx8mq-nwl-dsi'. The properties are only valid for i.MX8MM and i.MX8MN
devices with the compatible string 'fsl,imx8mm-mipi-dsim', as described in
samsung,mipi-dsim.yaml.
Fix warning:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb: dsi@30a00000:
Unevaluated properties are not allowed ('ports', 'samsung,burst-clock-frequency', 'samsung,esc-clock-frequency' were unexpected)
from schema $id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
Frank Li [Tue, 22 Oct 2024 20:23:41 +0000 (16:23 -0400)]
arm64: dts: mba8mx: remove undocumented 'data-lanes' at panel
'data-lanes' is port0 of lvds bridge. Needn't set it for simple panel. Fix
below CHECK_DTBS warning:
arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb:
panel-lvds: port:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
Tim Harvey [Tue, 22 Oct 2024 15:30:31 +0000 (08:30 -0700)]
arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support
The Gateworks GW82XX-2X is an ARM based single board computer (SBC)
comprised of the i.MX8M Plus based gw702x SoM and the gw82xx baseboard
featuring:
- i.MX8M Plus SoC
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller (GSC)
- microSD (1.8V/3.3V Capable)
- panel status bi-color LED
- pushbutton switch
- fan controller with tachometer
- USB Type-C connector
- PCIe switch
- 2x GbE RJ45 connectors
- multi-protocol RS232/RS485/RS422 Serial ports
- 2x Flexible Socket Adapters with SDIO/UART/USB/PCIe
(for M.2 and miniPCIe expansion)
- 2x isolated CAN
- GPS
- accelerometer
- magnetometer
- off-board connectors for: SPI, GPIO, I2C, ADC
- Wide range DC power input
- support for 802.3at PoE (via adapter)