NeilBrown [Wed, 28 Aug 2024 23:06:28 +0000 (09:06 +1000)]
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation") Signed-off-by: NeilBrown <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Jeff Layton [Mon, 26 Aug 2024 14:32:34 +0000 (10:32 -0400)]
fs/nfsd: fix update of inode attrs in CB_GETATTR
Currently, we copy the mtime and ctime to the in-core inode and then
mark the inode dirty. This is fine for certain types of filesystems, but
not all. Some require a real setattr to properly change these values
(e.g. ceph or reexported NFS).
Fix this code to call notify_change() instead, which is the proper way
to effect a setattr. There is one problem though:
In this case, the client is holding a write delegation and has sent us
attributes to update our cache. We don't want to break the delegation
for this since that would defeat the purpose. Add a new ATTR_DELEG flag
that makes notify_change bypass the try_break_deleg call.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation") Reviewed-by: Christian Brauner <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Jeff Layton [Fri, 23 Aug 2024 22:27:38 +0000 (18:27 -0400)]
nfsd: hold reference to delegation when updating it for cb_getattr
Once we've dropped the flc_lock, there is nothing that ensures that the
delegation that was found will still be around later. Take a reference
to it while holding the lock and then drop it when we've finished with
the delegation.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation") Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open
Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of
sc_type") states_show() relied on sc_type field to be of valid
type before calling into a subfunction to show content of a
particular stateid. From that commit, we split the validity of
the stateid into sc_status and no longer changed sc_type to 0
while unhashing the stateid. This resulted in kernel oopsing
for nfsv4.0 opens that stay around and in nfs4_show_open()
would derefence sc_file which was NULL.
Instead, for closed open stateids forgo displaying information
that relies of having a valid sc_file.
To reproduce: mount the server with 4.0, read and close
a file and then on the server cat /proc/fs/nfsd/clients/2/states
Fixes: 3f29cc82a84c ("nfsd: split sc_status out of sc_type") Signed-off-by: Olga Kornievskaia <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Jeff Layton [Thu, 22 Aug 2024 18:47:01 +0000 (14:47 -0400)]
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to
checking for the security label, then args.context will be set to
uninitialized junk on the stack, which we'll then try to free.
Initialize it early.
Fixes: f59388a579c6 ("NFSD: Add nfsd4_encode_fattr4_sec_label()") Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Using a non-constant string as an sprintf-style is potentially dangerous:
net/sunrpc/svc.c: In function 'param_get_pool_mode':
net/sunrpc/svc.c:164:32: error: format not a string literal and no format arguments [-Werror=format-security]
Jeff Layton [Fri, 12 Jul 2024 11:26:44 +0000 (07:26 -0400)]
nfsd: nfsd_file_lease_notifier_call gets a file_lease as an argument
"data" actually refers to a file_lease and not a file_lock. Both structs
have their file_lock_core as the first field though, so this bug should
be harmless without struct randomization in play.
Reported-by: Florian Evers <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219008 Fixes: 05580bbfc6bc ("nfsd: adapt to breakup of struct file_lock") Signed-off-by: Jeff Layton <[email protected]> Tested-by: Florian Evers <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Gaosheng Cui [Sat, 6 Jul 2024 06:50:08 +0000 (14:50 +0800)]
gss_krb5: Fix the error handling path for crypto_sync_skcipher_setkey
If we fail to call crypto_sync_skcipher_setkey, we should free the
memory allocation for cipher, replace err_return with err_free_cipher
to free the memory of cipher.
Fixes: 4891f2d008e4 ("gss_krb5: import functionality to derive keys into the kernel") Signed-off-by: Gaosheng Cui <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
Chuck Lever [Mon, 24 Jun 2024 21:14:16 +0000 (17:14 -0400)]
MAINTAINERS: Add a bugzilla link for NFSD
I recently found out about B: for noting where subsystem bugs can be
filed. I do pay attention to bugzilla.kernel.org. The Linux NFS
community has decided to steer kernel NFS issues to the kernel.org
bugzilla instead of bugzilla.linux-nfs.org.
Remove the W: entry; the sourceforge information is stale and
unmaintained.
Jeff Layton [Thu, 13 Jun 2024 18:34:33 +0000 (14:34 -0400)]
sunrpc: refactor pool_mode setting code
Allow the pool_mode setting code to be called from internal callers
so we can call it from a new netlink op. Add a new svc_pool_map_get
function to return the current setting. Change the existing module
parameter handling to use the new interfaces under the hood.
Jeff Layton [Thu, 13 Jun 2024 18:34:32 +0000 (14:34 -0400)]
nfsd: allow passing in array of thread counts via netlink
Now that nfsd_svc can handle an array of thread counts, fix up the
netlink threads interface to construct one from the netlink call
and pass it through so we can start a pooled server the same way we
would start a normal one.
Note that any unspecified values in the array are considered zeroes,
so it's possible to shut down a pooled server by passing in a short
array that has only zeros, or even an empty array.
Jeff Layton [Thu, 13 Jun 2024 18:34:31 +0000 (14:34 -0400)]
nfsd: make nfsd_svc take an array of thread counts
Now that the refcounting is fixed, rework nfsd_svc to use the same
thread setup as the pool_threads interface. Have it take an array of
thread counts instead of just a single value, and pass that from the
netlink threads set interface. Since the new netlink interface doesn't
have the same restriction as pool_threads, move the guard against
shutting down all threads to write_pool_threads.
Jeff Layton [Thu, 13 Jun 2024 18:34:30 +0000 (14:34 -0400)]
sunrpc: fix up the special handling of sv_nrpools == 1
Only pooled services take a reference to the svc_pool_map. The sunrpc
code has always used the sv_nrpools value to detect whether the service
is pooled.
The problem there is that nfsd is a pooled service, but when it's
running in "global" pool_mode, it doesn't take a reference to the pool
map because it has a sv_nrpools value of 1. This means that we have
two separate codepaths for starting the server, depending on whether
it's pooled or not.
Fix this by adding a new flag to the svc_serv, that indicates whether
the serv is pooled. With this we can have the nfsd service
unconditionally take a reference, regardless of pool_mode.
Note that this is a behavior change for
/sys/module/sunrpc/parameters/pool_mode. Usually this file does not
allow you to change the pool-mode while there are nfsd threads running,
but if the pool-mode is "global" it's allowed. My assumption is that
this is a bug, since it probably should never have worked this way.
This patch changes the behavior such that you get back EBUSY even
when nfsd is running in global mode. I think this is more reasonable
behavior, and given that most people set this today using the module
parameter, it's doubtful anyone will notice.
Chuck Lever [Tue, 11 Jun 2024 19:36:46 +0000 (15:36 -0400)]
NFSD: Support write delegations in LAYOUTGET
I noticed LAYOUTGET(LAYOUTIOMODE4_RW) returning NFS4ERR_ACCESS
unexpectedly. The NFS client had created a file with mode 0444, and
the server had returned a write delegation on the OPEN(CREATE). The
client was requesting a RW layout using the write delegation stateid
so that it could flush file modifications.
Creating a read-only file does not seem to be problematic for
NFSv4.1 without pNFS, so I began looking at NFSD's implementation of
LAYOUTGET.
The failure was because fh_verify() was doing a permission check as
part of verifying the FH presented during the LAYOUTGET. It uses the
loga_iomode value to specify the @accmode argument to fh_verify().
fh_verify(MAY_WRITE) on a file whose mode is 0444 fails with -EACCES.
To permit LAYOUT* operations in this case, add OWNER_OVERRIDE when
checking the access permission of the incoming file handle for
LAYOUTGET and LAYOUTCOMMIT.
Andy Shevchenko [Wed, 8 May 2024 15:19:38 +0000 (18:19 +0300)]
lockd: Use *-y instead of *-objs in Makefile
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Chuck Lever [Tue, 4 Jun 2024 15:24:00 +0000 (11:24 -0400)]
NFSD: Fix nfsdcld warning
Since CONFIG_NFSD_LEGACY_CLIENT_TRACKING is a new config option, its
initial default setting should have been Y (if we are to follow the
common practice of "default Y, wait, default N, wait, remove code").
Paul also suggested adding a clearer remedy action to the warning
message.
Dan Carpenter [Thu, 9 May 2024 10:48:28 +0000 (13:48 +0300)]
NFSD: harden svcxdr_dupstr() and svcxdr_tmpalloc() against integer overflows
These lengths come from xdr_stream_decode_u32() and so we should be a
bit careful with them. Use size_add() and struct_size() to avoid
integer overflows. Saving size_add()/struct_size() results to a u32 is
unsafe because it truncates away the high bits.
Also generally storing sizes in longs is safer. Most systems these days
use 64 bit CPUs. It's harder for an addition to overflow 64 bits than
it is to overflow 32 bits. Also functions like vmalloc() can
successfully allocate UINT_MAX bytes, but nothing can allocate ULONG_MAX
bytes.
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:
- Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
set the alpha enable bit and not set bits that don't exist
- Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
warnings
- Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
correct
- Fix the min/max rate clamping logic in the Allwinner driver that
got broken in v6.9
- Limit runtime PM enabling in the Mediatek driver to only
mt8183-mfgcfg so that system wide resume doesn't break on other
Mediatek SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
Merge tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix unnecessary copy to 0 when kernel is booted at address 0
- Fix usercopy crash when dumping dtl via debugfs
- Avoid possible crash when PCI hotplug races with error handling
- Fix kexec crash caused by scv being disabled before other CPUs
call-in
- Fix powerpc selftests build with USERCFLAGS set
Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.
* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build with USERCFLAGS set
powerpc/pseries: Fix scv instruction crash with kexec
powerpc/eeh: avoid possible crash when edev->pdev changes
powerpc/pseries: Whitelist dtl slub object for copying to userspace
powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0
Merge tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"An i2c driver fix"
* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:
$ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
...
gcc -Wno-error cache_shape.c ...
cache_shape.c:18:10: fatal error: utils.h: No such file or directory
18 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.
Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.
Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.
With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:
Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"A single bug fix to properly remove all of the securityfs IMA
measurement lists"
* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: fix wrong zero-assignment during securityfs dentry remove
Merge tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci update from Bjorn Helgaas:
- Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
Synopsys DesignWare eDMA driver and reflect that he is no longer at
Synopsys and isn't in a position to maintain the DesignWare xData
traffic generator (Bjorn Helgaas)
* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator
Merge tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for the CMODX example in the recently added icache flushing
prctl()
- A fix to the perf driver to avoid corrupting event data on counter
overflows when external overflow handlers are in use
- A fix to clear all hardware performance monitor events on boot, to
avoid dangling events firmware or previously booted kernels from
triggering spuriously
- A fix to the perf event probing logic to avoid erroneously reporting
the presence of unimplemented counters. This also prevents some
implemented counters from being reported
- A build fix for the vector sigreturn selftest on clang
- A fix to ftrace, which now requires the previously optional index
argument to ftrace_graph_ret_addr()
- A fix to avoid deadlocking if kexec crash handling triggers in an
interrupt context
* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Avoid deadlock in kexec crash path
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
riscv: selftests: Fix vsetivli args for clang
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
documentation: Fix riscv cmodx example
- xe: migration error handling + typoed register name in gt setup
- i915: usb-c fix to shut up warnings on MTL+
- panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
wrongly
- panel quirks
- nouveau: NULL deref in get_modes
drm core:
- fbdev big endian fix for the dma memory backed variant
drivers/firmware:
- fix sysfb refcounting"
* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/mcr: Avoid clobbering DSS steering
drm/xe: fix error handling in xe_migrate_update_pgtables
drm/ttm: Always take the bo delayed cleanup path for imported bos
drm/fbdev-generic: Fix framebuffer on big endian devices
drm/panthor: Fix sync-only jobs
drm/panthor: Don't check the array stride on empty uobj arrays
drm/amdgpu/atomfirmware: silence UBSAN warning
drm/radeon: check bo_va->bo is non-NULL before using it
drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
drm/amd/display: Update efficiency bandwidth for dcn351
drm/amd/display: Fix refresh rate range for some panel
drm/amd/display: Account for cursor prefetch BW in DML1 mode support
drm/amd/display: Add refresh rate range check
drm/amd/display: Reset freesync config before update new state
drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
drm: panel-orientation-quirks: Add quirk for Valve Galileo
drm/i915/display: For MTL+ platforms skip mg dp programming
drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
firmware: sysfb: Fix reference count of sysfb parent device
Merge tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
driver:
- add two OF lookup quirks for TSC2005 and MIPS Lantiq
- don't try to figure out bgpio_bits from the 'ngpios' property in
gpio-mmio"
* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: of: add polarity quirk for TSC2005
gpio: mmio: do not calculate bgpio_bits via "ngpios"
gpiolib: of: fix lookup quirk for MIPS Lantiq
Merge tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fixes from Jarkko Sakkinen:
"This contains the fixes for !chip->auth condition, preventing the
breakage of:
- tpm_ftpm_tee.c
- tpm_i2c_nuvoton.c
- tpm_ibmvtpm.c
- tpm_tis_i2c_cr50.c
- tpm_vtpm_proxy.c
All drivers will continue to work as they did in 6.9, except a single
warning (dev_warn() not WARN()) is printed to klog only to inform that
authenticated sessions are not enabled"
* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
tpm: Address !chip->auth in tpm_buf_append_name()
tpm: Address !chip->auth in tpm2_*_auth_session()
Wolfram Sang [Fri, 5 Jul 2024 14:08:55 +0000 (16:08 +0200)]
Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.
DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low". In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493bff8.
Jarkko Sakkinen [Wed, 3 Jul 2024 15:47:46 +0000 (18:47 +0300)]
tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Jarkko Sakkinen [Wed, 3 Jul 2024 15:33:14 +0000 (18:33 +0300)]
tpm: Address !chip->auth in tpm_buf_append_name()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Jarkko Sakkinen [Wed, 3 Jul 2024 16:39:27 +0000 (19:39 +0300)]
tpm: Address !chip->auth in tpm2_*_auth_session()
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
Merge tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
Merge tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix and add physical to virtual address translations in dasd and
virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
More code cleanup will follow.
- Small defconfig updates
* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
s390/vfio_ccw: Fix target addresses of TIC CCWs
s390: Update defconfigs
Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from, Andrew Morton:
"6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
and three unrelated MM fixes"
* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix incorrect inode allocation from reserved inodes
nilfs2: add missing check for inode numbers on directory entries
nilfs2: fix inode number range checks
mm: avoid overflows in dirty throttling logic
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
mm: optimize the redundant loop of mm_update_owner_next()
bnxt_en: Fix the resource check condition for RSS contexts
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Jakub Kicinski [Thu, 4 Jul 2024 14:31:54 +0000 (07:31 -0700)]
Merge tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Paolo Abeni [Thu, 4 Jul 2024 13:31:26 +0000 (15:31 +0200)]
Merge tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains a oneliner patch to inconditionally flush
workqueue containing stale objects to be released, syzbot managed to
trigger UaF. Patch from Florian Westphal.
netfilter pull request 24-07-04
* tag 'nf-24-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: unconditionally flush pending work before notifier
====================
Shigeru Yoshida [Wed, 3 Jul 2024 09:16:49 +0000 (18:16 +0900)]
inet_diag: Initialize pad field in struct inet_diag_req_v2
KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw
sockets uses the pad field in struct inet_diag_req_v2 for the
underlying protocol. This field corresponds to the sdiag_raw_protocol
field in struct inet_diag_req_raw.
inet_diag_get_exact_compat() converts inet_diag_req to
inet_diag_req_v2, but leaves the pad field uninitialized. So the issue
occurs when raw_lookup() accesses the sdiag_raw_protocol field.
Fix this by initializing the pad field in
inet_diag_get_exact_compat(). Also, do the same fix in
inet_diag_dump_compat() to avoid the similar issue in the future.
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
When we process segments with TCP AO, we don't check it in
tcp_parse_options(). Thus, opt_rx->saw_unknown is set to 1,
which unconditionally triggers the BPF TCP option parser.
Matt Roper [Wed, 26 Jun 2024 21:05:37 +0000 (14:05 -0700)]
drm/xe/mcr: Avoid clobbering DSS steering
A couple copy/paste mistakes in the code that selects steering targets
for OADDRM and INSTANCE0 unintentionally clobbered the steering target
for DSS ranges in some cases.
The OADDRM/INSTANCE0 values were also not assigned as intended, although
that mistake wound up being harmless since the desired values for those
specific ranges were '0' which the kzalloc of the GT structure should
have already taken care of implicitly.
drm/ttm: Always take the bo delayed cleanup path for imported bos
Bos can be put with multiple unrelated dma-resv locks held. But
imported bos attempt to grab the bo dma-resv during dma-buf detach
that typically happens during cleanup. That leads to lockde splats
similar to the below and a potential ABBA deadlock.
Fix this by always taking the delayed workqueue cleanup path for
imported bos.
Requesting stable fixes from when the Xe driver was introduced,
since its usage of drm_exec and wide vm dma_resvs appear to be
the first reliable trigger of this.
[22982.116427] ============================================
[22982.116428] WARNING: possible recursive locking detected
[22982.116429] 6.10.0-rc2+ #10 Tainted: G U W
[22982.116430] --------------------------------------------
[22982.116430] glxgears:sh0/5785 is trying to acquire lock:
[22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0
[22982.116438]
but task is already holding lock:
[22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116442]
other info that might help us debug this:
[22982.116442] Possible unsafe locking scenario:
====================
fix OOM and order check in msg_zerocopy selftest
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
And, we find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
====================
selftests: make order checking verbose in msg_zerocopy selftest
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
====================
Intel Wired LAN Driver Updates 2024-06-25 (ice)
This series contains updates to ice driver only.
Milena adds disabling of extts events when PTP is disabled.
Jake prevents possible NULL pointer by checking that timestamps are
ready before processing extts events and adds checks for unsupported
PTP pin configuration.
Petr Oros replaces _test_bit() with the correct test_bit() macro.
v1: https://lore.kernel.org/netdev/20240625170248[email protected]/
====================
Petr Oros [Tue, 2 Jul 2024 17:14:57 +0000 (10:14 -0700)]
ice: use proper macro for testing bit
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Jacob Keller [Tue, 2 Jul 2024 17:14:56 +0000 (10:14 -0700)]
ice: Reject pin requests with unsupported flags
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Jacob Keller [Tue, 2 Jul 2024 17:14:55 +0000 (10:14 -0700)]
ice: Don't process extts if PTP is disabled
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Shigeru Yoshida [Tue, 2 Jul 2024 16:04:27 +0000 (01:04 +0900)]
af_unix: Fix uninit-value in __unix_walk_scc()
KMSAN reported uninit-value access in __unix_walk_scc() [1].
In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).
However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.
Fix this by introducing a new temporary variable for the loop.
Sam Sun [Tue, 2 Jul 2024 13:55:55 +0000 (14:55 +0100)]
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
Radu Rendec [Tue, 2 Jul 2024 21:08:37 +0000 (17:08 -0400)]
net: rswitch: Avoid use-after-free in rswitch_poll()
The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.
Let's move around the instructions to use skb->len before the skb is
freed.
This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.
Boris Burkov [Tue, 2 Jul 2024 14:31:14 +0000 (07:31 -0700)]
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
Another improper use of __folio_put() in an error path after freshly
allocating pages/folios which returns them with the refcount initialized
to 1. The refactor from __free_pages() -> __folio_put() (instead of
folio_put) removed a refcount decrement found in __free_pages() and
folio_put but absent from __folio_put().
Boris Burkov [Tue, 2 Jul 2024 14:31:13 +0000 (07:31 -0700)]
btrfs: fix folio refcount in btrfs_do_encoded_write()
The conversion to folios switched __free_page() to __folio_put() in the
error path in btrfs_do_encoded_write().
However, this gets the page refcounting wrong. If we do hit that error
path (I reproduced by modifying btrfs_do_encoded_write to pretend to
always fail in a way that jumps to out_folios and running the fstests
case btrfs/281), then we always hit the following BUG freeing the folio:
BUG: Bad page state in process btrfs pfn:40ab0b
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x61be5 pfn:0x40ab0b
flags: 0x5ffff0000000000(node=0|zone=2|lastcpupid=0x1ffff)
raw: 05ffff00000000000000000000000000dead0000000001220000000000000000
raw: 0000000000061be5000000000000000000000001ffffffff0000000000000000
page dumped because: nonzero _refcount
Call Trace:
<TASK>
dump_stack_lvl+0x3d/0xe0
bad_page+0xea/0xf0
free_unref_page+0x8e1/0x900
? __mem_cgroup_uncharge+0x69/0x90
__folio_put+0xe6/0x190
btrfs_do_encoded_write+0x445/0x780
? current_time+0x25/0xd0
btrfs_do_write_iter+0x2cc/0x4b0
btrfs_ioctl_encoded_write+0x2b6/0x340
It turns out __free_page() decreases the page reference count while
__folio_put() does not. Switch __folio_put() to folio_put() which
decreases the folio reference count first.
netfilter: nf_tables: unconditionally flush pending work before notifier
syzbot reports:
KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831
KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530
KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45
[..]
Workqueue: events nf_tables_trans_destroy_work
Call Trace:
nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline]
nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline]
nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Problem is that the notifier does a conditional flush, but its possible
that the table-to-be-removed is still referenced by transactions being
processed by the worker, so we need to flush unconditionally.
We could make the flush_work depend on whether we found a table to delete
in nf-next to avoid the flush for most cases.
AFAICS this problem is only exposed in nf-next, with
commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"),
with this commit applied there is an unconditional fetch of
table->family which is whats triggering the above splat.
Fixes: 2c9f0293280e ("netfilter: nf_tables: flush pending destroy work before netlink notifier") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=4fd66a69358fc15ae2ad Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether.
Fixes: 41561f28e76a ("i2c: New Philips PNX bus driver") Signed-off-by: Piotr Wojtaszczyk <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
Since this ioctl hasn't been in a full release yet, change it from
"T", 0x1 to "R" 0x20, and also reserve 0x20-0x2F for future ioctl
commands, as some more are being worked on for the future"
* tag 'trace-v6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F
tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F
To prevent conflicts with other ioctl numbers to allow strace to have an
idea of what is happening, add the range of ioctls for the trace buffer
mapping from _IO("T", 0x1) to the range of "R" 0x20 - 0x2F.
Song Shuai [Wed, 26 Jun 2024 02:33:16 +0000 (10:33 +0800)]
riscv: kexec: Avoid deadlock in kexec crash path
If the kexec crash code is called in the interrupt context, the
machine_kexec_mask_interrupts() function will trigger a deadlock while
trying to acquire the irqdesc spinlock and then deactivate irqchip in
irq_set_irqchip_state() function.
Unlike arm64, riscv only requires irq_eoi handler to complete EOI and
keeping irq_set_irqchip_state() will only leave this possible deadlock
without any use. So we simply remove it.
Puranjay Mohan [Tue, 18 Jun 2024 14:58:20 +0000 (14:58 +0000)]
riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
ftrace_graph_ret_addr() takes an `idx` integer pointer that is used to
optimize the stack unwinding. Pass it a valid pointer to utilize the
optimizations that might be available in the future.
The commit is making riscv's usage of ftrace_graph_ret_addr() match
x86_64.
This series contains 3 fixes out of which the first one is a new fix
for invalid event data reported in lkml[2]. The last two are v3 of Samuel's
patch[1]. I added the RB/TB/Fixes tag and moved 1 unrelated change
to its own patch. I also changed an error message in kvm vcpu_pmu from
pr_err to pr_debug to avoid redundant failure error messages generated
due to the boot time quering of events implemented in the patch[1]
Here is the original cover letter for the patch[1]
Before this patch:
$ perf list hw
List of pre-defined events (to be used in -e or -M):
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
ref-cycles [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
* b4-shazam-merge:
perf: RISC-V: Check standard event availability
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
drivers/perf: riscv: Do not update the event data if uptodate
Samuel Holland [Fri, 28 Jun 2024 07:51:43 +0000 (00:51 -0700)]
perf: RISC-V: Check standard event availability
The RISC-V SBI PMU specification defines several standard hardware and
cache events. Currently, all of these events are exposed to userspace,
even when not actually implemented. They appear in the `perf list`
output, and commands like `perf stat` try to use them.
This is more than just a cosmetic issue, because the PMU driver's .add
function fails for these events, which causes pmu_groups_sched_in() to
prematurely stop scheduling in other (possibly valid) hardware events.
Add logic to check which events are supported by the hardware (i.e. can
be mapped to some counter), so only usable events are reported to
userspace. Since the kernel does not know the mapping between events and
possible counters, this check must happen during boot, when no counters
are in use. Make the check asynchronous to minimize impact on boot time.
Samuel Holland [Fri, 28 Jun 2024 07:51:42 +0000 (00:51 -0700)]
drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
Currently, we stop all the counters while a new cpu is brought online.
However, the hpmevent to counter mappings are not reset. The firmware may
have some stale encoding in their mapping structure which may lead to
undesirable results. We have not encountered such scenario though.
Atish Patra [Fri, 28 Jun 2024 07:51:41 +0000 (00:51 -0700)]
drivers/perf: riscv: Do not update the event data if uptodate
In case of an counter overflow, the event data may get corrupted
if called from an external overflow handler. This happens because
we can't update the counter without starting it when SBI PMU
extension is in use. However, the prev_count has been already
updated at the first pass while the counter value is still the
old one.
The solution is simple where we don't need to update it again
if it is already updated which can be detected using hwc state.
The event state in the overflow handler is updated in the following
patch. Thus, this fix can't be backported to kernel version where
overflow support was added.
Ryusuke Konishi [Sun, 23 Jun 2024 05:11:35 +0000 (14:11 +0900)]
nilfs2: fix incorrect inode allocation from reserved inodes
If the bitmap block that manages the inode allocation status is corrupted,
nilfs_ifile_create_inode() may allocate a new inode from the reserved
inode area where it should not be allocated.
Previous fix commit d325dc6eb763 ("nilfs2: fix use-after-free bug of
struct nilfs_root"), fixed the problem that reserved inodes with inode
numbers less than NILFS_USER_INO (=11) were incorrectly reallocated due to
bitmap corruption, but since the start number of non-reserved inodes is
read from the super block and may change, in which case inode allocation
may occur from the extended reserved inode area.
If that happens, access to that inode will cause an IO error, causing the
file system to degrade to an error state.
Fix this potential issue by adding a wraparound option to the common
metadata object allocation routine and by modifying
nilfs_ifile_create_inode() to disable the option so that it only allocates
inodes with inode numbers greater than or equal to the inode number read
in "nilfs->ns_first_ino", regardless of the bitmap status of reserved
inodes.
Ryusuke Konishi [Sun, 23 Jun 2024 05:11:34 +0000 (14:11 +0900)]
nilfs2: add missing check for inode numbers on directory entries
Syzbot reported that mounting and unmounting a specific pattern of
corrupted nilfs2 filesystem images causes a use-after-free of metadata
file inodes, which triggers a kernel bug in lru_add_fn().
As Jan Kara pointed out, this is because the link count of a metadata file
gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(),
tries to delete that inode (ifile inode in this case).
The inconsistency occurs because directories containing the inode numbers
of these metadata files that should not be visible in the namespace are
read without checking.
Fix this issue by treating the inode numbers of these internal files as
errors in the sanity check helper when reading directory folios/pages.
Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer
analysis.
Ryusuke Konishi [Sun, 23 Jun 2024 05:11:33 +0000 (14:11 +0900)]
nilfs2: fix inode number range checks
Patch series "nilfs2: fix potential issues related to reserved inodes".
This series fixes one use-after-free issue reported by syzbot, caused by
nilfs2's internal inode being exposed in the namespace on a corrupted
filesystem, and a couple of flaws that cause problems if the starting
number of non-reserved inodes written in the on-disk super block is
intentionally (or corruptly) changed from its default value.
This patch (of 3):
In the current implementation of nilfs2, "nilfs->ns_first_ino", which
gives the first non-reserved inode number, is read from the superblock,
but its lower limit is not checked.
As a result, if a number that overlaps with the inode number range of
reserved inodes such as the root directory or metadata files is set in the
super block parameter, the inode number test macros (NILFS_MDT_INODE and
NILFS_VALID_INODE) will not function properly.
In addition, these test macros use left bit-shift calculations using with
the inode number as the shift count via the BIT macro, but the result of a
shift calculation that exceeds the bit width of an integer is undefined in
the C specification, so if "ns_first_ino" is set to a large value other
than the default value NILFS_USER_INO (=11), the macros may potentially
malfunction depending on the environment.
Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and
by preventing bit shifts equal to or greater than the NILFS_USER_INO
constant in the inode number test macros.
Also, change the type of "ns_first_ino" from signed integer to unsigned
integer to avoid the need for type casting in comparisons such as the
lower bound check introduced this time.
Jan Kara [Fri, 21 Jun 2024 14:42:38 +0000 (16:42 +0200)]
mm: avoid overflows in dirty throttling logic
The dirty throttling logic is interspersed with assumptions that dirty
limits in PAGE_SIZE units fit into 32-bit (so that various multiplications
fit into 64-bits). If limits end up being larger, we will hit overflows,
possible divisions by 0 etc. Fix these problems by never allowing so
large dirty limits as they have dubious practical value anyway. For
dirty_bytes / dirty_background_bytes interfaces we can just refuse to set
so large limits. For dirty_ratio / dirty_background_ratio it isn't so
simple as the dirty limit is computed from the amount of available memory
which can change due to memory hotplug etc. So when converting dirty
limits from ratios to numbers of pages, we just don't allow the result to
exceed UINT_MAX.
This is root-only triggerable problem which occurs when the operator
sets dirty limits to >16 TB.
Jan Kara [Fri, 21 Jun 2024 14:42:37 +0000 (16:42 +0200)]
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
Patch series "mm: Avoid possible overflows in dirty throttling".
Dirty throttling logic assumes dirty limits in page units fit into
32-bits. This patch series makes sure this is true (see patch 2/2 for
more details).
The commit is broken in several ways. Firstly, the removed (u64) cast
from the multiplication will introduce a multiplication overflow on 32-bit
archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the
default settings with 4GB of RAM will trigger this). Secondly, the
div64_u64() is unnecessarily expensive on 32-bit archs. We have
div64_ul() in case we want to be safe & cheap. Thirdly, if dirty
thresholds are larger than 1<<32 pages, then dirty balancing is going to
blow up in many other spectacular ways anyway so trying to fix one
possible overflow is just moot.
Jinliang Zheng [Thu, 20 Jun 2024 12:21:24 +0000 (20:21 +0800)]
mm: optimize the redundant loop of mm_update_owner_next()
When mm_update_owner_next() is racing with swapoff (try_to_unuse()) or
/proc or ptrace or page migration (get_task_mm()), it is impossible to
find an appropriate task_struct in the loop whose mm_struct is the same as
the target mm_struct.
If the above race condition is combined with the stress-ng-zombie and
stress-ng-dup tests, such a long loop can easily cause a Hard Lockup in
write_lock_irq() for tasklist_lock.
Recognize this situation in advance and exit early.
Merge tag 'io_uring-6.10-20240703' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"A fix for a feature that went into the 6.10 merge window actually
ended up causing a regression in building bundles for receives.
Fix that up by ensuring we don't overwrite msg_inq before we use
it in the loop"
* tag 'io_uring-6.10-20240703' of git://git.kernel.dk/linux:
io_uring/net: don't clear msg_inq before io_recv_buf_select() needs it
Merge tag 'media/v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some fixes related to the IPU6 driver"
* tag 'media/v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ivsc: Depend on IPU_BRIDGE or not IPU_BRIDGE
media: intel/ipu6: Fix a null pointer dereference in ipu6_isys_query_stream_by_source
media: ipu6: Use the ISYS auxdev device as the V4L2 device's device
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
Fix invalid dereferencing of indirect CCW data pointer in
dasd_eckd_dump_sense() that leads to a kernel panic in error cases.
When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer
does not contain the data address itself but a pointer to the IDAL.
This needs to be translated from physical to virtual as well before
using it.
This dereferencing is also used for dasd_page_cache and also fixed
although it is very unlikely that this code path ever gets used.
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
iwl_mvm_get_bss_vif might return a NULL or ERR_PTR. Some of the callers
check only the NULL case, and some doesn't check at all.
Some of the callers even have a pointer to the mvmvif of the bss vif,
so we don't even need to call this function, and can simply get the vif
from mvmvif. Do it for those cases, and for the others - properly check
if IS_ERR_OR_NULL
Johannes Berg [Wed, 3 Jul 2024 03:43:14 +0000 (06:43 +0300)]
wifi: iwlwifi: mvm: avoid link lookup in statistics
We already iterate the link bss_conf/link_info and have the
pointer, or know that deflink/bss_conf is used, so avoid an
extra lookup and just pass the pointer. This may also avoid
a crash when this is processed during restart, where the FW
to link conf array (link_id_to_link_conf) may be NULLed out.
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
Since we now want to sync the queues even when we're in RFKILL, we
shouldn't wake up the wait queue since we still expect to get all the
notifications from the firmware.
projects / linux.git / log