Andy Lutomirski [Wed, 27 Jun 2018 05:45:52 +0000 (22:45 -0700)]
x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80"
Commit:
8bb2610bc496 ("x86/entry/64/compat: Preserve r8-r11 in int $0x80")
was busted: my original patch had a minor conflict with
some of the nospec changes, but "git apply" is very clever
and silently accepted the patch by making the same changes
to a different function in the same file. There was obviously
a huge offset, but "git apply" for some reason doesn't feel
any need to say so.
Move the changes to the correct function. Now the
test_syscall_vdso_32 selftests passes.
If anyone cares to observe the original problem, try applying the
patch at:
Arnd Bergmann [Tue, 19 Jun 2018 14:02:27 +0000 (16:02 +0200)]
powerpc/powermac: Fix rtc read/write functions
As Mathieu pointed out, my conversion to time64_t was incorrect and
resulted in negative times to be read from the RTC. The problem is
that during the conversion from a byte array to a time64_t, the
'unsigned char' variable holding the top byte gets turned into a
negative signed 32-bit integer before being assigned to the 64-bit
variable for any times after 1972.
This changes the logic to cast to an unsigned 32-bit number first for
the Macintosh time and then convert that to the Unix time, which then
gives us a time in the documented 1904..2040 year range. I decided not
to use the longer 1970..2106 range that other drivers use, for
consistency with the literal interpretation of the register, but that
could be easily changed if we decide we want to support any Mac after
2040.
Just to be on the safe side, I'm also adding a WARN_ON that will
trigger if either the year 2040 has come and is observed by this
driver, or we run into an RTC that got set back to a pre-1970 date for
some reason (the two are indistinguishable).
For the RTC write functions, Andreas found another problem: both
pmu_request() and cuda_request() are varargs functions, so changing
the type of the arguments passed into them from 32 bit to 64 bit
breaks the API for the set_rtc_time functions. This changes it back to
32 bits.
The same code exists in arch/m68k/ and is patched in an identical way
now in a separate patch.
Dmitry Torokhov [Mon, 25 Jun 2018 19:02:40 +0000 (12:02 -0700)]
Input: psmouse - fix button reporting for basic protocols
The commit ba667650c568 ("Input: psmouse - clean up code") was pretty
brain-dead and broke extra buttons reporting for variety of PS/2 mice:
Genius, Thinkmouse and Intellimouse Explorer. We need to actually inspect
the data coming from the device when reporting events.
The B2.1 core (which is in 7260 A0 and B0) doesn't have the
SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL setup in the memsys init code, nor
does it have the warm boot flag re-definition on entry. Those changes
were for B2.2 and later MEMSYS cores. Fall back to the previous S2/S3
entry method for these specific chips.
Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
Doug Berger [Fri, 11 May 2018 22:02:41 +0000 (15:02 -0700)]
soc: bcm: brcmstb: pm: Add support for newer rev B3.0 controllers
Update the Device Tree binding document and add a matching entry for the
MEMC DDR controller revision B3.0 which is found on chips like 7278A0
and newer.
Signed-off-by: Doug Berger <[email protected]>
[florian: tweak commit message, make it apply to upstream kernel] Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
PCI: controller: Move PCI_DOMAINS selection to arch Kconfig
Commit 51bc085d6454 ("PCI: Improve host drivers compile test coverage")
added configuration options to allow PCI host controller drivers to be
compile tested on all architectures.
Some host controller drivers (eg PCIE_ALTERA) config entries select the
PCI_DOMAINS config option to enable PCI domains management in the kernel.
Now that host controller drivers can be compiled on all architectures, this
triggers build regressions on arches that do not implement the PCI_DOMAINS
required API (ie pci_domain_nr()):
drivers/ata/pata_ali.c: In function 'ali_init_chipset':
drivers/ata/pata_ali.c:469:38: error: implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'?
Furthemore, some software configurations (ie Jailhouse) require a
PCI_DOMAINS enabled kernel to configure multiple host controllers without
having an explicit dependency on the ARM platform on which they run.
Make PCI_DOMAINS a visible configuration option on ARM so that software
configurations that need it can manually select it and move the PCI_DOMAINS
selection from PCI controllers configuration file to ARM sub-arch config
entries that currently require it, fixing the issue.
Alan Douglas [Fri, 22 Jun 2018 16:17:17 +0000 (17:17 +0100)]
PCI: Initialize endpoint library before controllers
The endpoint library must be initialized before its users, which are in
drivers/pci/controllers. The endpoint initialization currently depends on
link order.
This corrects a kernel crash when loading the Cadence EP driver, since it
calls devm_pci_epc_create() and this is only valid once the endpoint
library has been initialized.
Fixes: 6e0832fa432e ("PCI: Collect all native drivers under drivers/pci/controller/") Signed-off-by: Alan Douglas <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
Keith Busch [Tue, 26 Jun 2018 15:14:58 +0000 (09:14 -0600)]
block: Fix transfer when chunk sectors exceeds max
A device may have boundary restrictions where the number of sectors
between boundaries exceeds its max transfer size. In this case, we need
to cap the max size to the smaller of the two limits.
Dave Gerlach [Tue, 26 Jun 2018 17:05:17 +0000 (10:05 -0700)]
memory: ti-emif-sram: Add resume function to recopy sram code
After an RTC+DDR cycle we lose sram context so emif pm functions present
in sram are lost. We can check if the first byte of the original
code in DDR contains the same first byte as the code in sram, and if
they do not match we know we have lost context and must recopy the
functions to the previous address to maintain PM functionality.
Eric Biggers [Tue, 26 Jun 2018 15:59:46 +0000 (16:59 +0100)]
dh key: fix rounding up KDF output length
Commit 383203eff718 ("dh key: get rid of stack allocated array") changed
kdf_ctr() to assume that the length of key material to derive is a
multiple of the digest size. The length was supposed to be rounded up
accordingly. However, the round_up() macro was used which only gives
the correct result on power-of-2 arguments, whereas not all hash
algorithms have power-of-2 digest sizes. In some cases this resulted in
a write past the end of the 'outbuf' buffer.
Fix it by switching to roundup(), which works for non-power-of-2 inputs.
- X.509: fix a (usually un-seen) bug in RSA signature parsing
* 'fixes-v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
X.509: unpack RSA signatureValue field from BIT STRING
Smack: Mark inode instant in smack_task_to_inode
Linus Torvalds [Tue, 26 Jun 2018 15:41:54 +0000 (08:41 -0700)]
Merge tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two regression fixes and an incorrect error value propagation fix from
'rename exchange'"
* tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix return value on rename exchange failure
btrfs: fix invalid-free in btrfs_extent_same
Btrfs: fix physical offset reported by fiemap for inline extents
Adam Ford [Fri, 18 May 2018 01:20:52 +0000 (20:20 -0500)]
ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
When booting from MMC/SD in rw mode on DA850 EVM, the system
crashes because the write protect pin should be active high
and not active low. This patch fixes the polarity of the WP pin.
Fixes: bdf0e8364fd3 ("ARM: davinci: da850-evm: use gpio descriptor for mmc pins") Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Sekhar Nori <[email protected]>
Commit 667416f38554 ("powerpc/mm: Fix kernel crash on page table free")
added a call for pgtable_page_dtor in the rcu page table free routine. We missed
the fact that for 32 bit platforms we did call the 'dtor' early. Drop the extra
call for pgtable_page_dtor. We remove the call from __pte_free_tlb so that we
do the page table free and 'dtor' call together. This should help when we
switch these platforms to pte fragments.
Bjorn Helgaas [Mon, 25 Jun 2018 13:17:33 +0000 (08:17 -0500)]
PCI: shpchp: Manage SHPC unconditionally on non-ACPI systems
An SHPC can be operated either by platform firmware or by the OS. The OS
uses a host bridge ACPI _OSC method to negotiate for control of SHPC. If
firmware wants to prevent an OS from operating an SHPC, it must supply an
_OSC method that declines to grant SHPC ownership to the OS.
If acpi_pci_find_root() returns NULL, it means there's no ACPI host bridge
device (PNP0A03 or PNP0A08) and hence no _OSC method, so the OS is always
allowed to manage the SHPC.
Fix a NULL pointer dereference when CONFIG_ACPI=y but the current
hardware/firmware platform doesn't support ACPI. In that case,
acpi_get_hp_hw_control_from_firmware() is implemented but
acpi_pci_find_root() returns NULL.
drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'
If 'platform_get_resource_byname()' fails, we should release some resources
before leaving, as already done in the other error handling path of the
function.
Andrey Ryabinin [Mon, 25 Jun 2018 10:24:27 +0000 (13:24 +0300)]
x86/mm: Don't free P4D table when it is folded at runtime
When the P4D page table layer is folded at runtime, the p4d_free()
should do nothing, the same as in <asm-generic/pgtable-nop4d.h>.
It seems this bug should cause double-free in efi_call_phys_epilog(),
but I don't know how to trigger that code path, so I can't confirm that
by testing.
Jan Beulich [Mon, 25 Jun 2018 10:21:59 +0000 (04:21 -0600)]
x86/entry/32: Add explicit 'l' instruction suffix
Omitting suffixes from instructions in AT&T mode is bad practice when
operand size cannot be determined by the assembler from register
operands, and is likely going to be warned about by upstream GAS in the
future (mine does already).
Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header
variable is never initialized, and through code optimization concludes
that a lot of other code cannot possibly work after that:
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr':
drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret < 0 ? 0 : le32_to_cpu(ent.addr);
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data':
drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
ent_len = le16_to_cpu(ent.len);
drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
u16 offset = le16_to_cpu(hdr->data_offset);
^~~~~~
drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
u16 loffset = le16_to_cpu(ent->offset);
^~~~~~~
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len':
drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
return ret < 0 ? 0 : le16_to_cpu(ent.len);
^
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id':
drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning,
and we can remove the CONFIG_OF dependency.
The commit 4e88d4c08301 ("usb: add a flag to skip PHY
initialization to struct usb_hcd") delete the assignment
for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect)
are not called, the USB PHY driver is not notified of hot plug
event, then the disconnection will not be detected by hardware.
Merge tag 'iio-fixes-4.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 4.18 cycle.
* bmp280
- Fix wrong relative humidity unit.
* buffer
- Fix a function signature to match the function.
* inv_mpu6050
- Fix a regression in which older ACPI devices won't have working
interrupts due to lack of information on the interrupt type.
* mma8452
- Don't ignore data ready interrupt when handling interrupts as will
look like an unhandled interrupt.
* tsl2x7x/tsl2772
- Avoid a potential division by zero.
X.509: unpack RSA signatureValue field from BIT STRING
The signatureValue field of a X.509 certificate is encoded as a BIT STRING.
For RSA signatures this BIT STRING is of so-called primitive subtype, which
contains a u8 prefix indicating a count of unused bits in the encoding.
We have to strip this prefix from signature data, just as we already do for
key data in x509_extract_key_data() function.
This wasn't noticed earlier because this prefix byte is zero for RSA key
sizes divisible by 8. Since BIT STRING is a big-endian encoding adding zero
prefixes has no bearing on its value.
The signature length, however was incorrect, which is a problem for RSA
implementations that need it to be exactly correct (like AMD CCP).
Signed-off-by: Maciej S. Szmigiero <[email protected]> Fixes: c26fd69fa009 ("X.509: Add a crypto key parser for binary (DER) X.509 certificates") Cc: [email protected] Signed-off-by: James Morris <[email protected]>
Ravi Bangoria [Mon, 25 Jun 2018 12:42:20 +0000 (18:12 +0530)]
perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE]
perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE]
which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is
used as an end marker for the perf report but it's unused for perf
script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate,
just like it is done in 'perf report'.
Before:
# perf record -o - ls | perf script
<SNIP 'ls' output>
Segmentation fault (core dumped)
#
After:
# perf record -o - ls | perf script
<SNIP 'ls' output>
Segmentation fault (core dumped)
ls 7031 4392.099856: 250000 cpu-clock:uhH: 7f5e0ce7cd60
ls 7031 4392.100355: 250000 cpu-clock:uhH: 7f5e0c706ef7
#
shows transaction counter tx_nc_tend with value 3 but it was triggered
only once as seen by the output of mytesttx.
When looking up the event name tx_nc_tend the following function
sequence is called:
parse_events_multi_pmu_add()
+--> perf_pmu__scan() being called with NULL argument
+--> pmu_read_sysfs() scans directory ../devices/ for
all PMUs
+--> perf_pmu__find() tries to find a PMU in the
global pmu list.
+--> pmu_lookup() called to read all file
entries when not in global
list.
pmu_lookup() causes the issue. It calls
+---> pmu_aliases() to read all the entries in the PMU directory.
On s390 this is named
/sys/devices/cpum_cf/events.
+--> pmu_aliases_parse() reads all files and creates an
alias for each file name.
So we end up with first entry created by
reading the sysfs file
[root@s35lp76 perf]# cat /sys/devices/cpum_cf
/events/TX_NC_TEND
event=0x008d
[root@s35lp76 perf]#
Debug output shows this entry
tx_nc_tend -> 'cpum_cf'/'event=0x008d
'/
After all files in this directory have been
read and aliases created this function is called:
+--> pmu_add_cpu_aliases()
This function looks up the CPU tables
created by the json files.
With json files for s390 now available all
the aliases are added to
the PMU alias list a second time.
The second entry is added by
reading the json file converted by jevent
resulting in file pmu-events/pmu-events.c:
{
.name = "tx_nc_tend",
.event = "event=0x8d",
.desc = "Unit: cpum_cf Completed TEND \
instructions \
in non-constrained TX mode",
.topic = "extended",
.long_desc = "A TEND instruction has \
completed in a \
non-constrained \
transactional-execution mode",
.pmu = "cpum_cf",
},
Debug output shows this entry
tx_nc_tend -> 'cpum_cf'/'event=0x8d'/
Function pmu_aliases_parse() and pmu_add_cpu_aliases() both use
__perf_pmu__new_alias() to add an alias to the PMU alias list. There is
no check if an alias already exist
So we end up with 2 entries for tx_nc_tend in the PMU alias list.
Having set up the PMU alias list for this PMU now
parse_events_multi_add_pmu() reads the complete alias list and adds each
alias with parse_events_add_pmu() to the global perfev_list. This
causes the alias to be added multiple times to the event list.
Fix this by making __perf_pmu__new_alias() to merge alias definitions if
an alias is already on the alias list. Also print a debug message when
the alias has mismatches in some fields.
Thomas Richter [Fri, 15 Jun 2018 10:11:04 +0000 (12:11 +0200)]
perf alias: Rebuild alias expression string to make it comparable
PMU alias definitions in sysfs files may have spaces, newlines and
numbers with leading zeroes. Some alias definitions may also appear in
JSON files without spaces, etc.
Scan alias definitions and remove leading zeroes, spaces, newlines, etc
and rebuild string to make alias->str member comparable.
s390 for example has terms specified as event=0x0091 (read from files
../<PMU>/events/<FILE> and terms specified as event=0x91 (read from JSON
files).
Yonghong Song [Sat, 16 Jun 2018 17:47:39 +0000 (10:47 -0700)]
perf tools: Fix a clang 7.0 compilation error
Arnaldo reported the perf build failure with latest llvm/clang compiler
(7.0).
$ make LIBCLANGLLVM=1 -C tools/perf/
<SNIP>
CC /tmp/tmp.t53Qo38zci/tests/kmod-path.o
util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::SmallVectorImpl<char> >
perf::getBPFObjectFromModule(llvm::Module*)’:
util/c++/clang.cpp:150:43: error: no matching function for call to
‘llvm::TargetMachine::addPassesToEmitFile(llvm::legacy::PassManager&,
llvm::raw_svector_ostream&, llvm::TargetMachine::CodeGenFileType)’
TargetMachine::CGFT_ObjectFile)) {
^
In file included from util/c++/clang.cpp:25:0:
/usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate:
virtual bool llvm::TargetMachine::addPassesToEmitFile(
llvm::legacy::PassManagerBase&, llvm::raw_pwrite_stream&,
llvm::raw_pwrite_stream*, llvm::TargetMachine::CodeGenFileType, bool,
llvm::MachineModuleInfo*)
virtual bool addPassesToEmitFile(PassManagerBase &, raw_pwrite_stream &,
^~~~~~~~~~~~~~~~~~~
/usr/local/include/llvm/Target/TargetMachine.h:254:16: note:
candidate expects 6 arguments, 3 provided
mv: cannot stat '/tmp/tmp.t53Qo38zci/util/c++/.clang.o.tmp': No such file or directory
make[7]: *** [/home/acme/git/perf/tools/build/Makefile.build:101:
/tmp/tmp.t53Qo38zci/util/c++/clang.o] Error 1
make[6]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: c++] Error 2
make[5]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: util] Error 2
make[5]: *** Waiting for unfinished jobs....
CC /tmp/tmp.t53Qo38zci/tests/thread-map.o
The function addPassesToEmitFile signature changed in llvm 7.0 and such
a change caused the failure. This patch fixed the issue with using
proper function signatures under different compiler versions.
tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall
This updates the tools/perf/ copy of the powerpc file used to generate
the syscall table file used to make 'perf trace' become aware of the new
'rseq' syscall, no matter in which system it gets built, i.e. older
systems where the syscalls are not available in the running kernel (via
tracefs) or in the system headers will still be aware of these
syscalls/.
From this commit:
bb862b021d75 ("powerpc: Wire up restartable sequences system call")
Silencing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h'
perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq'
This updates the tools/perf/ copy of the system call table for x86 which makes
'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no
matter in which system it gets built, i.e. older systems where the syscalls are
not available in the running kernel (via tracefs) or in the system headers will
still be aware of these syscalls/.
These are the csets introducing the source drift:
05c17cedf85b ("x86: Wire up restartable sequence system call") 7a074e96dee6 ("aio: implement io_pgetevents")
This silences the following tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
7595bda2fb43 ("drm: Add DRM client cap for aspect-ratio")
The DRM caps are not yet being decoded in 'perf trace', so this sync
doesn't incur in any change in behaviour in any tools, just silencing
this tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
Jiri Olsa [Mon, 11 Jun 2018 09:34:22 +0000 (11:34 +0200)]
perf tests: Add valid callback for parse-events test
Adding optional 'valid' callback for events tests in parse-events
object, so we don't try to parse PMUs, which are not supported.
Following line is displayed for skipped test:
running test 52 'intel_pt//u'... SKIP
Committer note:
Use named initializers in the struct evlist_test variable to avoid
breaking the build on centos:5, 6 and others with a similar gcc:
cc1: warnings being treated as errors
tests/parse-events.c: In function 'test_pmu_events':
tests/parse-events.c:1817: error: missing initializer
tests/parse-events.c:1817: error: (near initialization for 'e.type')
Adding the struct parse_events_error argument to parse_events call. Also
adding parse_events_print_error to get more details on the parsing
failures, like:
Use named initializers in the struct parse_events_error variable to
avoid breaking the build on centos5, 6 and others with a similar gcc:
cc1: warnings being treated as errors
tests/parse-events.c: In function 'test_event':
tests/parse-events.c:1696: error: missing initializer
tests/parse-events.c:1696: error: (near initialization for 'err.str')
Sandipan Das [Mon, 11 Jun 2018 10:40:49 +0000 (16:10 +0530)]
perf report powerpc: Fix crash if callchain is empty
For some cases, the callchain provided by the kernel may be empty. So,
the callchain ip filtering code will cause a crash if we do not check
whether the struct ip_callchain pointer is NULL before accessing any
members.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
Thomas Richter [Mon, 11 Jun 2018 07:31:53 +0000 (09:31 +0200)]
perf test session topology: Fix test on s390
On s390 this test case fails because the socket identifiction numbers
assigned to the CPU are higher than the CPU identification numbers.
F/ix this by adding the platform architecture into the perf data header
flag information. This helps identifiing the test platform and handles
s390 specifics in process_cpu_topology().
Before:
[root@p23lp27 perf]# perf test -vvvvv -F 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-iUv755
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
After:
[root@p23lp27 perf]# perf test -vvvvv -F 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-8X8VTs
CPU 0, core 0, socket 6
CPU 1, core 1, socket 3
---- end ----
Session topology: Ok
[root@p23lp27 perf]#
Thomas Richter [Mon, 11 Jun 2018 07:31:52 +0000 (09:31 +0200)]
perf record: Support s390 random socket_id assignment
On s390 the socket identifier assigned to a CPU identifier is random and
(depending on the configuration of the LPAR) may be higher than the CPU
identifier. This is currently not supported.
Fix this by allowing arbitrary socket identifiers being assigned to
CPU id.
Output before:
[root@p23lp27 perf]# ./perf report --header -I -v
...
socket_id number is too big.You may need to upgrade the perf tool.
Error:
The perf.data file has no samples!
# ========
# captured on : Tue May 29 09:29:57 2018
# header version : 1
...
# Core ID and Socket ID information is not available
...
[root@p23lp27 perf]#
Output after:
[root@p23lp27 perf]# ./perf report --header -I -v
...
Error:
The perf.data file has no samples!
# ========
# captured on : Tue May 29 09:29:57 2018
# header version : 1
...
# CPU 0: Core ID 0, Socket ID 6
# CPU 1: Core ID 1, Socket ID 3
# CPU 2: Core ID -1, Socket ID -1
...
[root@p23lp27 perf]#
Laura Abbott [Mon, 11 Jun 2018 18:06:53 +0000 (11:06 -0700)]
staging: android: ion: Return an ERR_PTR in ion_map_kernel
The expected return value from ion_map_kernel is an ERR_PTR. The error
path for a vmalloc failure currently just returns NULL, triggering
a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR.
Dirk Gouders [Thu, 21 Jun 2018 13:30:54 +0000 (15:30 +0200)]
kconfig: fix line numbers for if-entries in menu tree
The line numers for if-entries in the menu tree are off by one or more
lines which is confusing when debugging for correctness of unrelated changes.
According to the git log, commit a02f0570ae201c49 (kconfig: improve
error handling in the parser) was the last one that changed that part
of the parser and replaced
"if_entry: T_IF expr T_EOL"
by
"if_entry: T_IF expr nl"
but the commit message does not state why this has been done.
When reverting that part of the commit, only the line numers are
corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise
the menu tree remains unchanged (checked with zconfdump() enabled in
conf.c).
Sven Joachim [Mon, 18 Jun 2018 17:45:25 +0000 (19:45 +0200)]
stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
When building a 64-bit 4.18-rc1 kernel with a 32-bit userland, I
noticed that stack protection was silently disabled. Adding -m64 in
gcc-x86_64-has-stack-protector.sh fixed that, similar to what has been
noticed in commit 2a61f4747eea ("stack-protector: test compiler
capability in Kconfig and drop AUTO mode") for
gcc-x86_32-has-stack-protector.sh.
Paul Burton [Tue, 19 Jun 2018 20:14:58 +0000 (13:14 -0700)]
powerpc: Remove -Wattribute-alias pragmas
With SYSCALL_DEFINEx() disabling -Wattribute-alias generically, there's
no need to duplicate that for PowerPC syscalls.
This reverts commit 415520373975 ("powerpc: fix build failure by
disabling attribute-alias warning in pci_32") and commit 2479bfc9bc60
("powerpc: Fix build by disabling attribute-alias warning for
SYSCALL_DEFINEx").
Arnd Bergmann [Tue, 19 Jun 2018 20:14:57 +0000 (13:14 -0700)]
disable -Wattribute-alias warning for SYSCALL_DEFINEx()
gcc-8 warns for every single definition of a system call entry
point, e.g.:
include/linux/compat.h:56:18: error: 'compat_sys_rt_sigprocmask' alias between functions of incompatible types 'long int(int, compat_sigset_t *, compat_sigset_t *, compat_size_t)' {aka 'long int(int, struct <anonymous> *, struct <anonymous> *, unsigned int)'} and 'long int(long int, long int, long int, long int)' [-Werror=attribute-alias]
asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\
^~~~~~~~~~
include/linux/compat.h:45:2: note: in expansion of macro 'COMPAT_SYSCALL_DEFINEx'
COMPAT_SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
^~~~~~~~~~~~~~~~~~~~~~
kernel/signal.c:2601:1: note: in expansion of macro 'COMPAT_SYSCALL_DEFINE4'
COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset,
^~~~~~~~~~~~~~~~~~~~~~
include/linux/compat.h:60:18: note: aliased declaration here
asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\
^~~~~~~~~~
The new warning seems reasonable in principle, but it doesn't
help us here, since we rely on the type mismatch to sanitize the
system call arguments. After I reported this as GCC PR82435, a new
-Wno-attribute-alias option was added that could be used to turn the
warning off globally on the command line, but I'd prefer to do it a
little more fine-grained.
Interestingly, turning a warning off and on again inside of
a single macro doesn't always work, in this case I had to add
an extra statement inbetween and decided to copy the __SC_TEST
one from the native syscall to the compat syscall macro. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 for more details
about this.
[[email protected]:
- Rebase atop current master.
- Split GCC & version arguments to __diag_ignore() in order to match
changes to the preceding patch.
- Add the comment argument to match the preceding patch.]
Arnd Bergmann [Tue, 19 Jun 2018 20:14:56 +0000 (13:14 -0700)]
kbuild: add macro for controlling warnings to linux/compiler.h
I have occasionally run into a situation where it would make sense to
control a compiler warning from a source file rather than doing so from
a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...)
helpers.
The approach here is similar to what glibc uses, using __diag() and
related macros to encapsulate a _Pragma("GCC diagnostic ...") statement
that gets turned into the respective "#pragma GCC diagnostic ..." by
the preprocessor when the macro gets expanded.
Like glibc, I also have an argument to pass the affected compiler
version, but decided to actually evaluate that one. For now, this
supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7,
GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting
versions is straightforward here. GNU compilers starting with gcc-4.2
could support it in principle, but "#pragma GCC diagnostic push"
was only added in gcc-4.6, so it seems simpler to not deal with those
at all. The same versions show a large number of warnings already,
so it seems easier to just leave it at that and not do a more
fine-grained control for them.
The use cases I found so far include:
- turning off the gcc-8 -Wattribute-alias warning inside of the
SYSCALL_DEFINEx() macro without having to do it globally.
- Reducing the build time for a simple re-make after a change,
once we move the warnings from ./Makefile and
./scripts/Makefile.extrawarn into linux/compiler.h
- More control over the warnings based on other configurations,
using preprocessor syntax instead of Makefile syntax. This should make
it easier for the average developer to understand and change things.
- Adding an easy way to turn the W=1 option on unconditionally
for a subdirectory or a specific file. This has been requested
by several developers in the past that want to have their subsystems
W=1 clean.
- Integrating clang better into the build systems. Clang supports
more warnings than GCC, and we probably want to classify them
as default, W=1, W=2 etc, but there are cases in which the
warnings should be classified differently due to excessive false
positives from one or the other compiler.
- Adding a way to turn the default warnings into errors (e.g. using
a new "make E=0" tag) while not also turning the W=1 warnings into
errors.
This patch for now just adds the minimal infrastructure in order to
do the first of the list above. As the #pragma GCC diagnostic
takes precedence over command line options, the next step would be
to convert a lot of the individual Makefiles that set nonstandard
options to use __diag() instead.
[[email protected]:
- Rebase atop current master.
- Add __diag_GCC, or more generally __diag_<compiler>, abstraction to
avoid code outside of linux/compiler-gcc.h needing to duplicate
knowledge about different GCC versions.
- Add a comment argument to __diag_{ignore,warn,error} which isn't
used in the expansion of the macros but serves to push people to
document the reason for using them - per feedback from Kees Cook.
- Translate severity to GCC-specific pragmas in linux/compiler-gcc.h
rather than using GCC-specific in linux/compiler_types.h.
- Drop all but GCC 8 macros, since we only need to define macros for
versions that we need to introduce pragmas for, and as of this
series that's just GCC 8.
- Capitalize comments in linux/compiler-gcc.h to match the style of
the rest of the file.
- Line up macro definitions with tabs in linux/compiler-gcc.h.]
Peter Chen [Tue, 12 Jun 2018 01:53:01 +0000 (09:53 +0800)]
usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered
The port->logbuffer_head may be wrong if the two processes enters
_tcpm_log at the mostly same time. The 2nd process enters _tcpm_log
before the 1st process update the index, then the 2nd process will
not allocate logbuffer, when the 2nd process tries to use log buffer,
the index has already updated by the 1st process, so it will get
NULL pointer for updated logbuffer, the error message like below:
Hans de Goede [Thu, 7 Jun 2018 13:54:48 +0000 (15:54 +0200)]
NFC: pn533: Fix wrong GFP flag usage
pn533_recv_response() is an urb completion handler, so it must use
GFP_ATOMIC. pn533_usb_send_frame() OTOH runs from a regular sleeping
context, so the pn533_submit_urb_for_response() there (and only there)
can use the regular GFP_KERNEL flags.
Uniden UBC125 radio scanner has USB interface which fails to work
with cdc_acm driver:
usb 1-1.5: new full-speed USB device number 4 using xhci_hcd
cdc_acm 1-1.5:1.0: Zero length descriptor references
cdc_acm: probe of 1-1.5:1.0 failed with error -22
Adding the NO_UNION_NORMAL quirk for the device fixes the issue:
usb 1-4: new full-speed USB device number 15 using xhci_hcd
usb 1-4: New USB device found, idVendor=1965, idProduct=0018
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: UBC125XLT
usb 1-4: Manufacturer: Uniden Corp.
usb 1-4: SerialNumber: 0001
cdc_acm 1-4:1.0: ttyACM0: USB ACM device
`lsusb -v` of the device:
Bus 001 Device 015: ID 1965:0018 Uniden Corporation
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1965 Uniden Corporation
idProduct 0x0018
bcdDevice 0.01
iManufacturer 1 Uniden Corp.
iProduct 2 UBC125XLT
iSerial 3 0001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 48
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Randy Dunlap [Thu, 21 Jun 2018 00:05:42 +0000 (17:05 -0700)]
staging/typec: fix tcpci_rt1711h build errors
Fix Kconfig warning and build errors in staging/typec/rt1711h.c.
The driver uses I2C interfaces so it should depend on I2C.
WARNING: unmet direct dependencies detected for TYPEC_TCPCI
Depends on [m]: STAGING [=y] && TYPEC_TCPM [=y] && I2C [=m]
Selected by [y]:
- TYPEC_RT1711H [=y] && STAGING [=y] && TYPEC_TCPM [=y]
and then:
drivers/staging/typec/tcpci.o: In function `tcpci_probe':
../drivers/staging/typec/tcpci.c:536: undefined reference to `__devm_regmap_init_i2c'
drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_init':
../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_register_driver'
drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_exit':
../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_del_driver'
drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_check_revision':
../drivers/staging/typec/tcpci_rt1711h.c:218: undefined reference to `i2c_smbus_read_word_data'
../drivers/staging/typec/tcpci_rt1711h.c:225: undefined reference to `i2c_smbus_read_word_data'
drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_probe':
../drivers/staging/typec/tcpci_rt1711h.c:251: undefined reference to `__devm_regmap_init_i2c'
drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_init':
../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_register_driver'
drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_exit':
../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_del_driver'
Heikki Krogerus [Thu, 21 Jun 2018 13:43:19 +0000 (16:43 +0300)]
usb: typec: ucsi: Fix for incorrect status data issue
According to UCSI Specification, Connector Change Event only
means a change in the Connector Status and Operation Mode
fields of the STATUS data structure. So any other change
should create another event.
Unfortunately on some platforms the firmware acting as PPM
(platform policy manager - usually embedded controller
firmware) still does not report any other status changes if
there is a connector change event. So if the connector power
or data role was changed when a device was plugged to the
connector, the driver does not get any indication about
that. The port will show wrong roles if that happens.
To fix the issue, always checking the data and power role
together with a connector change event.
Heikki Krogerus [Thu, 21 Jun 2018 13:43:18 +0000 (16:43 +0300)]
usb: typec: ucsi: acpi: Workaround for cache mode issue
This fixes an issue where the driver fails with an error:
ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0
On some platforms the UCSI ACPI mailbox SystemMemory
Operation Region may be setup before the driver has been
loaded. That will lead into the driver failing to map the
mailbox region, as it has been already marked as write-back
memory. acpi_os_ioremap() for x86 uses ioremap_cache()
unconditionally.
When the issue happens, the embedded controller has a
pending query event for the UCSI notification right after
boot-up which causes the operation region to be setup before
UCSI driver has been loaded.
The fix is to notify acpi core that the driver is about to
access memory region which potentially overlaps with an
operation region right before mapping it.
acpi_release_memory() will check if the memory has already
been setup (mapped) by acpi core, and deactivate it (unmap)
if it has. The driver is then able to map the memory with
ioremap_nocache() and set the memtype to uncached for the
region.
Heikki Krogerus [Thu, 21 Jun 2018 13:43:17 +0000 (16:43 +0300)]
acpi: Add helper for deactivating memory region
Sometimes memory resource may be overlapping with
SystemMemory Operation Region by design, for example if the
memory region is used as a mailbox for communication with a
firmware in the system. One occasion of such mailboxes is
USB Type-C Connector System Software Interface (UCSI).
With regions like that, it is important that the driver is
able to map the memory with the requirements it has. For
example, the driver should be allowed to map the memory as
non-cached memory. However, if the operation region has been
accessed before the driver has mapped the memory, the memory
has been marked as write-back by the time the driver is
loaded. That means the driver will fail to map the memory
if it expects non-cached memory.
To work around the problem, introducing helper that the
drivers can use to temporarily deactivate (unmap)
SystemMemory Operation Regions that overlap with their
IO memory.
Ajay Gupta [Thu, 21 Jun 2018 13:19:45 +0000 (16:19 +0300)]
usb: xhci: increase CRS timeout value
Some controllers take almost 55ms to complete controller
restore state (CRS).
There is no timeout limit mentioned in xhci specification so
fixing the issue by increasing the timeout limit to 100ms
Dongjiu Geng [Thu, 21 Jun 2018 13:19:43 +0000 (16:19 +0300)]
usb: xhci: remove the code build warning
Initialize the 'err' variate to remove the build warning,
the warning is shown as below:
drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread':
drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here
Zhengjun Xing [Thu, 21 Jun 2018 13:19:42 +0000 (16:19 +0300)]
xhci: Fix kernel oops in trace_xhci_free_virt_device
commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device")
set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel
panic in trace_xhci_free_virt_device. This patch reimplement the trace
function trace_xhci_free_virt_device, remove dev->udev dereference and
added more useful parameters to show in the trace function,it also makes
sure dev->udev is not NULL before calling trace_xhci_free_virt_device.
This issue happened when xhci-hcd trace is enabled and USB devices hot
plug test. Original use-after-free patch went to stable so this needs so
be applied there as well.
Mathias Nyman [Thu, 21 Jun 2018 13:19:41 +0000 (16:19 +0300)]
xhci: Fix perceived dead host due to runtime suspend race with event handler
Don't rely on event interrupt (EINT) bit alone to detect pending port
change in resume. If no change event is detected the host may be suspended
again, oterwise roothubs are resumed.
There is a lag in xHC setting EINT. If we don't notice the pending change
in resume, and the controller is runtime suspeded again, it causes the
event handler to assume host is dead as it will fail to read xHC registers
once PCI puts the controller to D3 state.
[ 268.520969] xhci_hcd: xhci_resume: starting port polling.
[ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling.
[ 268.521030] xhci_hcd: xhci_suspend: stopping port polling.
[ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001
[ 268.521139] xhci_hcd: Port Status Change Event for port 3
[ 268.521149] xhci_hcd: resume root hub
[ 268.521163] xhci_hcd: port resume event for port 3
[ 268.521168] xhci_hcd: xHC is not running.
[ 268.521174] xhci_hcd: handle_port_status: starting port polling.
[ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead
The EINT lag is described in a additional note in xhci specs 4.19.2:
"Due to internal xHC scheduling and system delays, there will be a lag
between a change bit being set and the Port Status Change Event that it
generated being written to the Event Ring. If SW reads the PORTSC and
sees a change bit set, there is no guarantee that the corresponding Port
Status Change Event has already been written into the Event Ring."
Merge tag 'fixes-for-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
usb: fixes for v4.18-rc1
First set of fixes for the current -rc cycle. The main parts being
warnings of different kinds being fixed. We're also adding support for
Intel'l Icelake devices on dwc3-pci.c.
It might prevent the machine from boot. It would wait for enough
randomness at the very beginning of kernel_init(). But there is
basically nothing running in parallel that would help to produce
any randomness.
Takashi Iwai [Mon, 25 Jun 2018 09:13:59 +0000 (11:13 +0200)]
ALSA: seq: Fix UBSAN warning at SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT ioctl
The kernel may spew a WARNING with UBSAN undefined behavior at
handling ALSA sequencer ioctl SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT:
UBSAN: Undefined behaviour in sound/core/seq/seq_clientmgr.c:2007:14
signed integer overflow: 2147483647 + 1 cannot be represented in type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x122/0x1c8 lib/dump_stack.c:113
ubsan_epilogue+0x12/0x86 lib/ubsan.c:159
handle_overflow+0x1c2/0x21f lib/ubsan.c:190
__ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198
snd_seq_ioctl_query_next_client+0x1ac/0x1d0 sound/core/seq/seq_clientmgr.c:2007
snd_seq_ioctl+0x264/0x3d0 sound/core/seq/seq_clientmgr.c:2144
....
It happens only when INT_MAX is passed there, as we're incrementing it
unconditionally. So the fix is trivial, check the value with
INT_MAX. Although the bug itself is fairly harmless, it's better to
fix it so that fuzzers won't hit this again later.
Takashi Iwai [Mon, 25 Jun 2018 09:09:11 +0000 (11:09 +0200)]
ALSA: timer: Fix UBSAN warning at SNDRV_TIMER_IOCTL_NEXT_DEVICE ioctl
The kernel may spew a WARNING about UBSAN undefined behavior at
handling ALSA timer ioctl SNDRV_TIMER_IOCTL_NEXT_DEVICE:
UBSAN: Undefined behaviour in sound/core/timer.c:1524:19
signed integer overflow: 2147483647 + 1 cannot be represented in type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x122/0x1c8 lib/dump_stack.c:113
ubsan_epilogue+0x12/0x86 lib/ubsan.c:159
handle_overflow+0x1c2/0x21f lib/ubsan.c:190
__ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198
snd_timer_user_next_device sound/core/timer.c:1524 [inline]
__snd_timer_user_ioctl+0x204d/0x2520 sound/core/timer.c:1939
snd_timer_user_ioctl+0x67/0x95 sound/core/timer.c:1994
....
It happens only when a value with INT_MAX is passed, as we're
incrementing it unconditionally. So the fix is trivial, check the
value with INT_MAX. Although the bug itself is fairly harmless, it's
better to fix it so that fuzzers won't hit this again later.
Hui Wang [Mon, 25 Jun 2018 06:40:56 +0000 (14:40 +0800)]
ALSA: hda/realtek - Fix the problem of two front mics on more machines
We have 3 more Lenovo machines, they all have 2 front mics on them,
so they need the fixup to change the location for one of two mics.
Among these 3 Lenovo machines, one of them has the same pin cfg as the
machine with subid 0x17aa3138, so use the pin cfg table to apply fixup
for them. The rest machines don't share the same pin cfg, so far use
the subid to apply fixup for them.
2) Fix bpf instruction alignment on powerpc et al., from Eric Dumazet.
3) Don't ignore IFLA_MTU attribute when creating new ipvlan links. From
Xin Long.
4) Fix use after free in AF_PACKET, from Eric Dumazet.
5) Mis-matched RTNL unlock in xen-netfront, from Ross Lagerwall.
6) Fix VSOCK loopback on big-endian, from Claudio Imbrenda.
7) Missing RX buffer offset correction when computing DMA addresses in
mvneta driver, from Antoine Tenart.
8) Fix crashes in DCCP's ccid3_hc_rx_send_feedback, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
sfc: make function efx_rps_hash_bucket static
strparser: Corrected typo in documentation.
qmi_wwan: add support for the Dell Wireless 5821e module
cxgb4: when disabling dcb set txq dcb priority to 0
net_sched: remove a bogus warning in hfsc
net: dccp: switch rx_tstamp_last_feedback to monotonic clock
net: dccp: avoid crash in ccid3_hc_rx_send_feedback()
net: Remove depends on HAS_DMA in case of platform dependency
MAINTAINERS: Add file patterns for dsa device tree bindings
net: mscc: make sparse happy
net: mvneta: fix the Rx desc DMA address in the Rx path
Documentation: e1000: Fix docs build error
Documentation: e100: Fix docs build error
Documentation: e1000: Use correct heading adornment
Documentation: e100: Use correct heading adornment
ipv6: mcast: fix unsolicited report interval after receiving querys
vhost_net: validate sock before trying to put its fd
VSOCK: fix loopback on big-endian systems
net: ethernet: ti: davinci_cpdma: make function cpdma_desc_pool_create static
xen-netfront: Update features after registering netdev
...
Viresh Kumar [Wed, 20 Jun 2018 06:15:37 +0000 (11:45 +0530)]
PM / Domains: Rename opp_node to np
The DT node passed here isn't necessarily an OPP node, as this routine
can also be used for cases where the "required-opps" property is present
directly in the device's node. Rename it.
Dan Carpenter [Thu, 21 Jun 2018 08:06:41 +0000 (11:06 +0300)]
cpufreq: qcom-kryo: Fix error handling in probe()
We should return if get_cpu_device() fails or it leads to a NULL
dereference. Also dev_pm_opp_of_get_opp_desc_node() returns NULL on
error, it never returns error pointers.
In __xfs_ag_resv_init we incorrectly calculate the amount by which to
decrease fdblocks when reserving blocks for the rmapbt. Because rmapbt
allocations do not decrease fdblocks, we must decrease fdblocks by the
entire size of the requested reservation in order to achieve our goal of
always having enough free blocks to satisfy an rmapbt expansion.
This is in contrast to the refcountbt/finobt, which /do/ subtract from
fdblocks whenever they allocate a block. For this allocation type we
preserve the existing behavior where we decrease fdblocks only by the
requested reservation minus the size of the existing tree.
This fixes the problem where the available block counts reported by
statfs change across a remount if there had been an rmapbt size change
since mount time.
Darrick J. Wong [Fri, 22 Jun 2018 06:26:58 +0000 (23:26 -0700)]
xfs: ensure post-EOF zeroing happens after zeroing part of a file
If a user asks us to zero_range part of a file, the end of the range is
EOF, and not aligned to a page boundary, invoke writeback of the EOF
page to ensure that the post-EOF part of the page is zeroed. This
ensures that we don't expose stale memory contents via mmap, if in a
clumsy manner.
Found by running generic/127 when it runs zero_range and mapread at EOF
one after the other.
Darrick J. Wong [Fri, 22 Jun 2018 06:26:58 +0000 (23:26 -0700)]
xfs: fix off-by-one error in xfs_rtalloc_query_range
In commit 8ad560d2565e6 ("xfs: strengthen rtalloc query range checks")
we strengthened the input parameter checks in the rtbitmap range query
function, but introduced an off-by-one error in the process. The call
to xfs_rtfind_forw deals with the high key being rextents, but we clamp
the high key to rextents - 1. This causes the returned results to stop
one block short of the end of the rtdev, which is incorrect.
Darrick J. Wong [Fri, 22 Jun 2018 06:26:57 +0000 (23:26 -0700)]
xfs: fix uninitialized field in rtbitmap fsmap backend
Initialize the extent count field of the high key so that when we use
the high key to synthesize an 'unknown owner' record (i.e. used space
record) at the end of the queried range we have a field with which to
compute rm_blockcount. This is not strictly necessary because the
synthesizer never uses the rm_blockcount field, but we can shut up the
static code analysis anyway.
Darrick J. Wong [Fri, 22 Jun 2018 06:26:57 +0000 (23:26 -0700)]
xfs: recheck reflink state after grabbing ILOCK_SHARED for a write
The reflink iflag could have changed since the earlier unlocked check,
so if we got ILOCK_SHARED for a write and but we're now a reflink inode
we have to switch to ILOCK_EXCL and relock.
This helps us avoid blowing lock assertions in things like generic/166:
Darrick J. Wong [Fri, 22 Jun 2018 06:26:57 +0000 (23:26 -0700)]
xfs: don't allow insert-range to shift extents past the maximum offset
Zorro Lang reports that generic/485 blows an assert on a filesystem with
512 byte blocks. The test tries to fallocate a post-eof extent at the
maximum file size and calls insert range to shift the extents right by
two blocks. On a 512b block filesystem this causes startoff to overflow
the 54-bit startoff field, leading to the assert.
Therefore, always check the rightmost extent to see if it would overflow
prior to invoking the insert range machinery.
Darrick J. Wong [Fri, 22 Jun 2018 06:26:56 +0000 (23:26 -0700)]
xfs: don't trip over negative free space in xfs_reserve_blocks
If we somehow end up with a filesystem that has fewer free blocks than
the blocks set aside to avoid ENOSPC deadlocks, it's possible that the
free space calculation in xfs_reserve_blocks will spit out a negative
number (because percpu_counter_sum returns s64). We fail to notice
this negative number and set fdblks_delta to it. Now we increment
fdblocks(!) and the unsigned type of m_resblks means that we end up
setting a ridiculously huge m_resblks reservation.
Avoid this comedy of errors by detecting the negative free space and
returning -ENOSPC.
Darrick J. Wong [Fri, 22 Jun 2018 06:26:55 +0000 (23:26 -0700)]
xfs: allow empty transactions while frozen
In commit e89c041338ed6ef ("xfs: implement the GETFSMAP ioctl") we
created the ability to obtain empty transactions. These transactions
have no log or block reservations and therefore can't modify anything.
Since they're also NO_WRITECOUNT they can run while the fs is frozen,
so we don't need to WARN_ON about that usage.
Paul Burton [Sun, 24 Jun 2018 16:33:22 +0000 (09:33 -0700)]
MIPS: Add ksig argument to rseq_{signal_deliver,handle_notify_resume}
Commit 784e0300fe9f ("rseq: Avoid infinite recursion when delivering
SIGSEGV") added a new ksig argument to the rseq_signal_deliver() &
rseq_handle_notify_resume() functions, and was merged in v4.18-rc2.
Meanwhile MIPS support for restartable sequences was also merged in
v4.18-rc2 with commit 9ea141ad5471 ("MIPS: Add support for restartable
sequences"), and therefore didn't get updated for the API change.
This results in build failures like the following:
CC arch/mips/kernel/signal.o
arch/mips/kernel/signal.c: In function 'handle_signal':
arch/mips/kernel/signal.c:804:22: error: passing argument 1 of
'rseq_signal_deliver' from incompatible pointer type
[-Werror=incompatible-pointer-types]
rseq_signal_deliver(regs);
^~~~
In file included from ./include/linux/context_tracking.h:5,
from arch/mips/kernel/signal.c:12:
./include/linux/sched.h:1811:56: note: expected 'struct ksignal *' but
argument is of type 'struct pt_regs *'
static inline void rseq_signal_deliver(struct ksignal *ksig,
~~~~~~~~~~~~~~~~^~~~
arch/mips/kernel/signal.c:804:2: error: too few arguments to function
'rseq_signal_deliver'
rseq_signal_deliver(regs);
^~~~~~~~~~~~~~~~~~~
Fix this by adding the ksig argument as was done for other architectures
in commit 784e0300fe9f ("rseq: Avoid infinite recursion when delivering
SIGSEGV").
Hans de Goede [Mon, 18 Jun 2018 16:09:36 +0000 (18:09 +0200)]
iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
Commit 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types")
causes inv_mpu_core_probe() to fail if the IRQ does not have a
trigger-type setup.
This happens on machines where the mpu6050 is enumerated through ACPI and
an older Interrupt type ACPI resource is used for the interrupt, rather
then a GpioInt type type, causing the mpu6050 driver to no longer work
there. This happens on e.g. the Asus T100TA.
This commits makes the mpu6050 fallback to the old IRQF_TRIGGER_RISING
default if the irq-type is not setup, fixing this.
Signed-off-by: Hans de Goede <[email protected]> Fixes: 5ec6486daa98 ("iio:imu: inv_mpu6050: support more interrupt types") Reviewed-by: Martin Kelly <[email protected]> Reviewed-by: Jean-Baptiste Maneyrol <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
Phil Reid [Tue, 5 Jun 2018 06:15:10 +0000 (14:15 +0800)]
iio: buffer: fix the function signature to match implementation
linux/iio/buffer-dma.h was not updated to when length was changed to
unsigned int.
Fixes: c043ec1ca5ba ("iio:buffer: make length types match kfifo types") Signed-off-by: Phil Reid <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
Leonard Crestez [Thu, 7 Jun 2018 18:52:50 +0000 (21:52 +0300)]
iio: mma8452: Fix ignoring MMA8452_INT_DRDY
Interrupts are ignored if no event bit is set in the status status
register and this breaks the buffer interface. No data is shown when
running "iio_generic_buffer -n mma8451 -a" and interrupt counts go
crazy.
Fix by not returning IRQ_NONE if DRDY is set.
Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle
multiple events")
Colin Ian King [Wed, 30 May 2018 18:19:36 +0000 (19:19 +0100)]
iio: tsl2x7x/tsl2772: avoid potential division by zero
It may be possible for tsl2772_get_lux to return a zero lux value
and hence a division by zero can occur when lux_val is zero. Check
for this case and return -ERANGE to avoid the division by zero.
Detected by CoverityScan, CID#1469484 ("Division or modulo by zero")
Linus Torvalds [Sun, 24 Jun 2018 12:29:15 +0000 (20:29 +0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
Kernel side:
- Remove an incorrect warning in uprobe_init_insn() when
insn_get_length() fails. The error return code is handled at the
call site.
- Move the inline keyword to the right place in the perf ringbuffer
code to address a W=1 build warning.
Tooling:
perf stat:
- Fix metric column header display alignment
- Improve error messages for default attributes, providing better
output for error in command line.
- Add --interval-clear option, to provide a 'watch' like printing
perf script:
- Show hw-cache events too
perf c2c:
- Fix data dependency problem in layout of 'struct c2c_hist_entry'
Core:
- Do not blindly assume that 'struct perf_evsel' can be obtained via
a straight forward container_of() as there are call sites which
hand in a plain 'struct hist' which is not part of a container.
- Fix error index in the PMU event parser, so that error messages can
point to the problematic token"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Move the inline keyword at the beginning of the function declaration
uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn()
perf script: Show hw-cache events
perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry
perf stat: Add event parsing error handling to add_default_attributes
perf stat: Allow to specify specific metric column len
perf stat: Fix metric column header display alignment
perf stat: Use only color_fprintf call in print_metric_only
perf stat: Add --interval-clear option
perf tools: Fix error index for pmu event parser
perf hists: Reimplement hists__has_callchains()
perf hists browser gtk: Use hist_entry__has_callchains()
perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
perf hists: Save the callchain_size in struct hist_entry
Linus Torvalds [Sun, 24 Jun 2018 12:18:19 +0000 (20:18 +0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fixes from Thomas Gleixer:
"A pile of rseq related fixups:
- Prevent infinite recursion when delivering SIGSEGV
- Remove the abort of rseq critical section on fork() as syscalls
inside rseq critical sections are explicitely forbidden. So no
point in doing the abort on the child.
- Align the rseq structure on 32 bytes in the ARM selftest code.
- Fix file permissions of the test script"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Avoid infinite recursion when delivering SIGSEGV
rseq/cleanup: Do not abort rseq c.s. in child on fork()
rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes
rseq/selftests: Make run_param_test.sh executable
Linus Torvalds [Sun, 24 Jun 2018 12:16:17 +0000 (20:16 +0800)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"Two fixlets for the EFI maze:
- Properly zero variables to prevent an early boot hang on EFI mixed
mode systems
- Fix the fallout of merging the 32bit and 64bit variants of EFI PCI
related code which ended up chosing the 32bit variant of the actual
EFi call invocation which leads to failures on 64bit"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Fix incorrect invocation of PciIo->Attributes()
efi/libstub/tpm: Initialize efi_physical_addr_t vars to zero for mixed mode
Linus Torvalds [Sun, 24 Jun 2018 12:06:42 +0000 (20:06 +0800)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"Two tiny fixes:
- Add the missing machine_real_restart() to objtools noreturn list so
it stops complaining
- Fix a trivial comment typo"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel.h: Fix a typo in comment
objtool: Add machine_real_restart() to the noreturn list
projects / linux.git / log