dt-bindings: visionox-rm69299: Update maintainers

The current maintainer (Harigovindan P) is no longer reachable through
the listed email. Update maintainers list to be Abhinav and I.

Signed-off-by: Jessica Zhang <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/panel: visionox-vtdr6130: Set prepare_prev_first flag

The DSI host must be enabled for the panel to be initialized in
prepare(). Set the prepare_prev_first flag to guarantee this.

Signed-off-by: Jessica Zhang <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/panel: novatek-nt36523: Set prepare_prev_first

The .prepare callback contains the init sequence, so the DSI host *must*
be enabled at that point. Set the prepare_prev_first flag to ensure that.

Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/imx/dcss: have all init functions use devres

dcss currently allocates and ioremaps quite a few resources in its probe
function's call graph. Devres now provides convenient functions which
perform the same task but do the cleanup automatically.

Port all memory allocations and ioremap() calls to the devres
counterparts.

Signed-off-by: Philipp Stanner <[email protected]>
Reviewed-by: Laurentiu Palcu <[email protected]>
Signed-off-by: Laurentiu Palcu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/imx/dcss: request memory region

The driver's memory regions are currently just ioremap()ed, but not
reserved through a request. That's not a bug, but having the request is
a little more robust.

Implement the region-request through the corresponding managed
devres-function.

Signed-off-by: Philipp Stanner <[email protected]>
Reviewed-by: Laurentiu Palcu <[email protected]>
Signed-off-by: Laurentiu Palcu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/nouveau/svm: remove unused but set variables

Fix the W=1 warning -Wunused-but-set-variable.

Cc: Karol Herbst <[email protected]>
Cc: Lyude Paul <[email protected]>
Cc: Danilo Krummrich <[email protected]>
Cc: [email protected]
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/8b133e7ec0e9aef728be301ac019c5ddcb3bbf51.1704908087.git.jani.nikula@intel.com

drm/nouveau/acr/ga102: remove unused but set variable

Fix the W=1 warning -Wunused-but-set-variable.

Cc: Karol Herbst <[email protected]>
Cc: Lyude Paul <[email protected]>
Cc: Danilo Krummrich <[email protected]>
Cc: [email protected]
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/4d9f62fa6963acfd8b7d8f623799ba3a516e347d.1704908087.git.jani.nikula@intel.com

drm/imx: prefer snprintf over sprintf

This will trade the W=1 warning -Wformat-overflow to
-Wformat-truncation. This lets us enable -Wformat-overflow subsystem
wide.

Cc: Philipp Zabel <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/14c0108a54007a8360d84162a1d63cba9613b945.1704908087.git.jani.nikula@intel.com

drm/amdgpu: prefer snprintf over sprintf

This will trade the W=1 warning -Wformat-overflow to
-Wformat-truncation. This lets us enable -Wformat-overflow subsystem
wide.

Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Cc: Pan, Xinhui <[email protected]>
Cc: [email protected]
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/fea7a52924f98b1ac24f4a7e6ba21d7754422430.1704908087.git.jani.nikula@intel.com

drm/vmwgfx: Fix the lifetime of the bo cursor memory

The cleanup can be dispatched while the atomic update is still active,
which means that the memory acquired in the atomic update needs to
not be invalidated by the cleanup. The buffer objects in vmw_plane_state
instead of using the builtin map_and_cache were trying to handle
the lifetime of the mapped memory themselves, leading to crashes.

Use the map_and_cache instead of trying to manage the lifetime of the
buffer objects held by the vmw_plane_state.

Fixes kernel oops'es in IGT's kms_cursor_legacy forked-bo.

Signed-off-by: Zack Rusin <[email protected]>
Fixes: bb6780aa5a1d ("drm/vmwgfx: Diff cursors when using cmds")
Cc: <[email protected]> # v6.2+
Reviewed-by: Martin Krastev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vmwgfx: Fix vmw_du_get_cursor_mob fencing of newly-created MOBs

The fencing of MOB creation used in vmw_du_get_cursor_mob was incompatible
with register-based device communication employed by this routine. As a
result cursor MOB creation was racy, leading to potentially broken/missing
mouse cursor on desktops using CursorMob device feature.

Fixes: 53bc3f6fb6b3 ("drm/vmwgfx: Clean up cursor mobs")
Signed-off-by: Martin Krastev <[email protected]>
Reviewed-by: Maaz Mombasawala <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vmwgfx: Add SPDX header to vmwgfx_drm.h

Update vmwgfx_drm.h with SPDX-License-Identifier:
(GPL-2.0 WITH Linux-syscall-note) OR MIT

Signed-off-by: Maaz Mombasawala <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vmwgfx: Make all surfaces shareable

There is no real need to have a separate pool for shareable and
non-shareable surfaces. Make all surfaces shareable, regardless of whether
the drm_vmw_surface_flag_shareable has been specified.

Signed-off-by: Maaz Mombasawala <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vmwgfx: Refactor drm connector probing for display modes

Implement drm_connector_helper_funcs.mode_valid and .get_modes,
replacing custom drm_connector_funcs.fill_modes code with
drm_helper_probe_single_connector_modes; for STDU, LDU & SOU
display units.

Signed-off-by: Martin Krastev <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Merge drm/drm-next into drm-misc-next

Kickstart 6.9 development cycle.

Signed-off-by: Maxime Ripard <[email protected]>

drm/panel: simple: Add EDT ETML1010G3DRA panel

Add support for the EDT ETML1010G3DRA 10.1" 1280x800 LVDS panel.
Datasheet can be found at [1].

[1] https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/Specifications/Active%20Displays/ETML1010G3DRA%20Ver.3-RoHS.pdf

Signed-off-by: Primoz Fiser <[email protected]>
Signed-off-by: Yannic Moog <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de

dt-bindings: display: panel-simple: add ETML1010G3DRA

Add Emerging Display Technology Corp. etml1010g3dra 10.1" LCD-TFT LVDS
panel compatible string.

Signed-off-by: Yannic Moog <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-1-8ec5b48eec05@phytec.de
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-1-8ec5b48eec05@phytec.de

drm/loongson: Error out if no VRAM detected

When a Loongson laptop is equipped with a Radeon GPU, it can be true that
there is no dedicated VRAM soldered on the motherboard. This is probably
for cost reason, but drm/loongson driver is probed because the platform
BIOS (either UEFI or PMON) forget to disable the integrated GPU.

So in the lsdc_get_dedicated_vram() function, we error out if no dedicated
VRAM detected. This fix nothing, but serve as a sanity check only.

Tested-by: Xiaotian Wu <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Signed-off-by: Sui Jingfeng <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/ttm: Make sure the mapped tt pages are decrypted when needed

Some drivers require the mapped tt pages to be decrypted. In an ideal
world this would have been handled by the dma layer, but the TTM page
fault handling would have to be rewritten to able to do that.

A side-effect of the TTM page fault handling is using a dma allocation
per order (via ttm_pool_alloc_page) which makes it impossible to just
trivially use dma_mmap_attrs. As a result ttm has to be very careful
about trying to make its pgprot for the mapped tt pages match what
the dma layer thinks it is. At the ttm layer it's possible to
deduce the requirement to have tt pages decrypted by checking
whether coherent dma allocations have been requested and the system
is running with confidential computing technologies.

This approach isn't ideal but keeping TTM matching DMAs expectations
for the page properties is in general fragile, unfortunately proper
fix would require a rewrite of TTM's page fault handling.

Fixes vmwgfx with SEV enabled.

v2: Explicitly include cc_platform.h
v3: Use CC_ATTR_GUEST_MEM_ENCRYPT instead of CC_ATTR_MEM_ENCRYPT to
limit the scope to guests and log when memory decryption is enabled.

Signed-off-by: Zack Rusin <[email protected]>
Fixes: 3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
Reviewed-by: Thomas Hellström <[email protected]>
Acked-by: Christian König <[email protected]>
Cc: Huang Rui <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vmwgfx: Fix possible null pointer derefence with invalid contexts

vmw_context_cotable can return either an error or a null pointer and its
usage sometimes went unchecked. Subsequent code would then try to access
either a null pointer or an error value.

The invalid dereferences were only possible with malformed userspace
apps which never properly initialized the rendering contexts.

Check the results of vmw_context_cotable to fix the invalid derefs.

Thanks:
ziming zhang(@ezrak1e) from Ant Group Light-Year Security Lab
who was the first person to discover it.
Niels De Graef who reported it and helped to track down the poc.

Fixes: 9c079b8ce8bf ("drm/vmwgfx: Adapt execbuf to the new validation api")
Cc: <[email protected]> # v4.20+
Reported-by: Niels De Graef <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Cc: Martin Krastev <[email protected]>
Cc: Maaz Mombasawala <[email protected]>
Cc: Ian Forbes <[email protected]>
Cc: Broadcom internal kernel review list <[email protected]>
Cc: [email protected]
Reviewed-by: Maaz Mombasawala <[email protected]>
Reviewed-by: Martin Krastev <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vmwgfx: Add SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 to command array.

Without this definition device errors will display the command name
as (null) when debug logging is enabled.

Signed-off-by: Ian Forbes <[email protected]>
Signed-off-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/ttm: replace busy placement with flags v6

Instead of a list of separate busy placement add flags which indicate
that a placement should only be used when there is room or if we need to
evict.

v2: add missing TTM_PL_FLAG_IDLE for i915
v3: fix auto build test ERROR on drm-tip/drm-tip
v4: fix some typos pointed out by checkpatch
v5: cleanup some rebase problems with VMWGFX
v6: implement some missing VMWGFX functionality pointed out by Zack,
    rename the flags as suggested by Michel, rebase on drm-tip and
    adjust XE as well

Signed-off-by: Christian König <[email protected]>
Signed-off-by: Somalapuram Amaranath <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/ttm: return ENOSPC from ttm_bo_mem_space v3

Only convert it to ENOMEM in ttm_bo_validate.

This allows ttm_bo_validate to distinguish between an out of memory
situation and just out of space in a placement domain.

v2: improve commit message
v3: fix kerneldoc typos

Signed-off-by: Christian König <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: sii902x: Fix audio codec unregistration

The driver never unregisters the audio codec platform device, which can
lead to a crash on module reloading, nor does it handle the return value
from sii902x_audio_codec_init().

Signed-off-by: Tomi Valkeinen <[email protected]>
Fixes: ff5781634c41 ("drm/bridge: sii902x: Implement HDMI audio support")
Cc: Jyri Sarha <[email protected]>
Reviewed-by: Aradhya Bhatia <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: sii902x: Fix probing race issue

A null pointer dereference crash has been observed rarely on TI
platforms using sii9022 bridge:

[   53.271356]  sii902x_get_edid+0x34/0x70 [sii902x]
[   53.276066]  sii902x_bridge_get_edid+0x14/0x20 [sii902x]
[   53.281381]  drm_bridge_get_edid+0x20/0x34 [drm]
[   53.286305]  drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper]
[   53.292955]  drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper]
[   53.300510]  drm_client_modeset_probe+0x1f0/0xbd4 [drm]
[   53.305958]  __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper]
[   53.313611]  drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper]
[   53.320039]  drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper]
[   53.326401]  drm_client_register+0x5c/0xa0 [drm]
[   53.331216]  drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper]
[   53.336881]  tidss_probe+0x128/0x264 [tidss]
[   53.341174]  platform_probe+0x68/0xc4
[   53.344841]  really_probe+0x188/0x3c4
[   53.348501]  __driver_probe_device+0x7c/0x16c
[   53.352854]  driver_probe_device+0x3c/0x10c
[   53.357033]  __device_attach_driver+0xbc/0x158
[   53.361472]  bus_for_each_drv+0x88/0xe8
[   53.365303]  __device_attach+0xa0/0x1b4
[   53.369135]  device_initial_probe+0x14/0x20
[   53.373314]  bus_probe_device+0xb0/0xb4
[   53.377145]  deferred_probe_work_func+0xcc/0x124
[   53.381757]  process_one_work+0x1f0/0x518
[   53.385770]  worker_thread+0x1e8/0x3dc
[   53.389519]  kthread+0x11c/0x120
[   53.392750]  ret_from_fork+0x10/0x20

The issue here is as follows:

- tidss probes, but is deferred as sii902x is still missing.
- sii902x starts probing and enters sii902x_init().
- sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from
  DRM's perspective.
- sii902x calls sii902x_audio_codec_init() and
  platform_device_register_data()
- The registration of the audio platform device causes probing of the
  deferred devices.
- tidss probes, which eventually causes sii902x_bridge_get_edid() to be
  called.
- sii902x_bridge_get_edid() tries to use the i2c to read the edid.
  However, the sii902x driver has not set up the i2c part yet, leading
  to the crash.

Fix this by moving the drm_bridge_add() to the end of the
sii902x_init(), which is also at the very end of sii902x_probe().

Signed-off-by: Tomi Valkeinen <[email protected]>
Fixes: 21d808405fe4 ("drm/bridge/sii902x: Fix EDID readback")
Reviewed-by: Aradhya Bhatia <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: tc358767: Limit the Pixel PLL input range

According to new configuration spreadsheet from Toshiba for TC9595,
the Pixel PLL input clock have to be in range 6..40 MHz. The sheet
calculates those PLL input clock as reference clock divided by both
pre-dividers. Add the extra limit.

Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

video/nomodeset: Select nomodeset= parameter with CONFIG_VIDEO

Enable support for nomodeset= parameter via CONFIG_VIDEO. Both,
DRM and fbdev, already select this option. Remove the existing
option CONFIG_VIDEO_NOMODESET. Simplifies the Kconfig rules.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

video/cmdline: Hide __video_get_options() behind CONFIG_FB_CORE

The function __video_get_options() only exists for compatibility
with old fbdev drivers that cannot be refactored easily. Hide it
behind CONFIG_FB_CORE.

v2:
* support CONFIG_FB_CORE=m via IS_ENABLED() (kernel test robot)

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

video/cmdline: Introduce CONFIG_VIDEO for video= parameter

Add CONFIG_VIDEO for common code in drivers/video/. Use the option to
select helpers for the video= parameter. Replaces CONFIG_VIDEO_CMDLINE.

Other common code in drivers/video/ can be moved behind CONFIG_VIDEO,
which will simplify the Kconfig rules.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/exec, drm/gpuvm: Prefer u32 over uint32_t

The relatively recently introduced drm/exec utility was using uint32_t
in its interface, which was then also carried over to drm/gpuvm.

Prefer u32 in new code and update drm/exec and drm/gpuvm accordingly.

Cc: Christian König <[email protected]>
Cc: Danilo Krummrich <[email protected]>
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Danilo Krummrich <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

media: tc358743: register v4l2 async device only after successful setup

Ensure the device has been setup correctly before registering the v4l2
async device, thus allowing userspace to access.

Signed-off-by: Alexander Stein <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Fixes: 4c5211a10039 ("[media] tc358743: register v4l2 asynchronous subdevice")
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

The patch completes the setting of CLKLANE_STOP for the imx8m{m,n,p}
platforms (i. e. not exynos).

Co-developed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: bridge: samsung-dsim: enter display mode in the enable() callback

The synaptics-r63353 (panel-bridge) can only be configured in command mode.
So, samsung-dsim (bridge) must not be in display mode during the
prepare()/unprepare() of the panel-bridge. Setting the
"pre_enable_prev_first" flag to true allows the prepare() of the
panel-bridge to be called between the pre_enabled() and enabled() of the
bridge. So, the bridge can enter display mode only in the enabled().
The unprepare() of the panel-bridge is instead called between the disable()
and post_disable() of the bridge. So, the disable() must exit the display
mode (i .e. enter command mode) to allow the panel-bridge to receive DSI
commands.

samsung_dsim_atomic_pre_enable   -> command mode
r63353_panel_prepare             -> send DSI commands
samsung_dsim_atomic_enable       -> enter display mode

samsung_dsim_atomic_disable      -> exit display mode (command mode)
r63353_panel_unprepare           -> send DSI commands
samsung_dsim_atomic_post_disable

Co-developed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vmwgfx: remove vmw_vram_gmr_placement

Seems to be unused.

Signed-off-by: Christian König <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Linux 6.8-rc1

Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Merge tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

bcachefs: Improve inode_to_text()

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: logged_ops_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: reflink_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs; extents_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: ec_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: subvolume_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: snapshot_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: alloc_background_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: xattr_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: dirent_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: inode_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs; quota_format.h

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: sb-counters_format.h

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: counters.c -> sb-counters.c

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: comment bch_subvolume

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: bch_snapshot::btime

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: add missing __GFP_NOWARN

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: opts->compression can now also be applied in the background

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Prep work for variable size btree node buffers

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: grab s_umount only if snapshotting

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d237320e98 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().

Signed-off-by: Su Yue <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exit

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb

Signed-off-by: Su Yue <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: bios must be 512 byte algined

Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: remove redundant variable tmp

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Improve trace_trans_restart_relock

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Fix excess transaction restarts in __bchfs_fallocate()

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: extents_to_bp_state

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: bkey_and_val_eq()

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Better journal tracepoints

Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Print size of superblock with space allocated

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Avoid flushing the journal in the discard path

When issuing discards, we may need to flush the journal if there's too
many buckets that can't be discarded until a journal flush.

But the heuristic was bad; we should be comparing the number of buckets
that need to flushes against the number of free buckets, not the number
of buckets we saw.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Improve move_extent tracepoint

Also print out the data_opts, so that we can see what specifically is
being done to an extent.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Add missing bch2_moving_ctxt_flush_all()

This fixes a bug with rebalance IOs getting stuck with reads completed,
but writes never being issued.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Re-add move_extent_write tracepoint

It appears this was accidentally deleted at some point - also, do a bit
of cleanup.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amount

Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code
that uses it to be woken up for other reasons, and fixes a bug where
rebalance wouldn't wake up when a scan was requested.

This raises the possibility of spurious wakeups, but callers should
always be able to handle that reasonably well.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Add .val_to_text() for KEY_TYPE_cookie

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Don't pass memcmp() as a pointer

Some (buggy!) compilers have issues with this.

Fixes: https://github.com/koverstreet/bcachefs/issues/625
Signed-off-by: Kent Overstreet <[email protected]>

Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs

Pull header fix from Kent Overstreet:
 "Just one small fixup for the RT build"

* tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs:
  spinlock: Fix failing build for PREEMPT_RT

bcachefs: Reduce would_deadlock restarts

We don't have to take locks in any particular ordering - we'll make
forward progress just fine - but if we try to stick to an ordering, it
can help to avoid excessive would_deadlock transaction restarts.

This tweaks the reflink path to take extents btree locks in the right
order.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: bch2_trans_account_disk_usage_change()

The disk space accounting rewrite is splitting out accounting for each
replicas set - those are moving to btree keys, instead of percpu
counters.

This breaks bch2_trans_fs_usage_apply() up, splitting out the part we
will still need.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: bch_fs_usage_base

Split out base filesystem usage into its own type; prep work for
breaking up bch2_trans_fs_usage_apply().

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: bch2_prt_compression_type()

bounds checking helper, since compression types are extensible

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: helpers for printing data types

We need bounds checking since new versions may introduce new data types.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: BTREE_TRIGGER_ATOMIC

Add a new flag to be explicit about when we're running atomic triggers.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: drop to_text code for obsolete bps in alloc keys

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: eytzinger_for_each() declares loop iter

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: Don't log errors if BCH_WRITE_ALLOC_NOWAIT

Previously, we added logging in the write path to ensure that any
unexpected errors getting reported to userspace have a log message; but
BCH_WRITE_ALLOC_NOWAIT is a special case, it's used for promotes where
errors are expected and not reported out to userspace - so we need to
silence those.

Signed-off-by: Kent Overstreet <[email protected]>

bcachefs: fix memleak in bch2_split_devs

The pointer dev_name can be modified by strseq(),
then causes the memleak:

unreferenced object 0xffff9d08a2916c80 (size 32):
  comm "mount.bcachefs", pid 9090, jiffies 4295856224 (age 17.564s)
  hex dump (first 32 bytes):
    2f 64 65 76 2f 6d 61 70 70 65 72 2f 74 65 73 74  /dev/mapper/test
    2d 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  -0..............
  backtrace:
    [<00000000c5d3be7d>] __kmem_cache_alloc_node+0x1f3/0x2c0
    [<0000000052215d26>] __kmalloc_node_track_caller+0x51/0x150
    [<0000000069fea956>] kstrdup+0x32/0x60
    [<000000000877fcf1>] bch2_split_devs+0x3f/0x150 [bcachefs]
    [<000000007ee93204>] bch2_mount+0xcb/0x640 [bcachefs]
    [<000000002dd1e04b>] legacy_get_tree+0x30/0x60
    [<000000006afc31d3>] vfs_get_tree+0x28/0xf0
    [<000000007b0c538e>] path_mount+0x475/0xb60
    [<0000000092de5882>] __x64_sys_mount+0x105/0x140
    [<0000000054fc05d8>] do_syscall_64+0x42/0xf0
    [<00000000df584910>] entry_SYSCALL_64_after_hwframe+0x6e/0x76

Fix it by copy pointer dev_name at beginning and free the copied
pointer at end.

Signed-off-by: Su Yue <[email protected]>
Reviewed-by: Brian Foster <[email protected]>
Signed-off-by: Kent Overstreet <[email protected]>

Merge tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client updates from Steve French:
 "Various smb client fixes, including multichannel and for SMB3.1.1
  POSIX extensions:

   - debugging improvement (display start time for stats)

   - two reparse point handling fixes

   - various multichannel improvements and fixes

   - SMB3.1.1 POSIX extensions open/create parsing fix

   - retry (reconnect) improvement including new retrans mount parm, and
     handling of two additional return codes that need to be retried on

   - two minor cleanup patches and another to remove duplicate query
     info code

   - two documentation cleanup, and one reviewer email correction"

* tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update iface_last_update on each query-and-update
  cifs: handle servers that still advertise multichannel after disabling
  cifs: new mount option called retrans
  cifs: reschedule periodic query for server interfaces
  smb: client: don't clobber ->i_rdev from cached reparse points
  smb: client: get rid of smb311_posix_query_path_info()
  smb: client: parse owner/group when creating reparse points
  smb: client: fix parsing of SMB3.1.1 POSIX create context
  cifs: update known bugs mentioned in kernel docs for cifs
  cifs: new nt status codes from MS-SMB2
  cifs: pick channel for tcon and tdis
  cifs: open_cached_dir should not rely on primary channel
  smb3: minor documentation updates
  Update MAINTAINERS email address
  cifs: minor comment cleanup
  smb3: show beginning time for per share stats
  cifs: remove redundant variable tcon_exist

Merge tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
 "New support:
   - Loongson LS2X APB DMA controller
   - sf-pdma: mpfs-pdma support
   - Qualcomm X1E80100 GPI dma controller support

  Updates:
   - Xilinx XDMA updates to support interleaved DMA transfers
   - TI PSIL threads for AM62P and J722S and cfg register regions
     description
   - axi-dmac Improving the cyclic DMA transfers
   - Tegra Support dma-channel-mask property
   - Remaining platform remove callback returning void conversions

 Driver fixes for:
   - Xilinx xdma driver operator precedence and initialization fix
   - Excess kernel-doc warning fix in imx-sdma xilinx xdma drivers
   - format-overflow warning fix for rz-dmac, sh usb dmac drivers
   - 'output may be truncated' fix for shdma, fsl-qdma and dw-edma
     drivers"

* tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits)
  dmaengine: dw-edma: increase size of 'name' in debugfs code
  dmaengine: fsl-qdma: increase size of 'irq_name'
  dmaengine: shdma: increase size of 'dev_id'
  dmaengine: xilinx: xdma: Fix kernel-doc warnings
  dmaengine: usb-dmac: Avoid format-overflow warning
  dmaengine: sh: rz-dmac: Avoid format-overflow warning
  dmaengine: imx-sdma: fix Excess kernel-doc warnings
  dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr()
  dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma()
  dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma
  dmaengine: xilinx: xdma: Workaround truncation compilation error
  dmaengine: pl330: issue_pending waits until WFP state
  dmaengine: xilinx: xdma: Implement interleaved DMA transfers
  dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers
  dmaengine: xilinx: xdma: Add transfer error reporting
  dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr()
  dmaengine: xilinx: xdma: Rework xdma_terminate_all()
  dmaengine: xilinx: xdma: Ease dma_pool alignment requirements
  dmaengine: xilinx: xdma: Add necessary macro definitions
  dmaengine: xilinx: xdma: Get rid of unused code
  ...

Merge tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux

Pull coccinelle updates from Julia Lawall:
 "Updates to the device_attr_show semantic patch to reflect the new
  guidelines of the Linux kernel documentation.

  The problem was identified by Li Zhijian <[email protected]>, who
  proposed an initial fix"

* tag 'coccinelle-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  coccinelle: device_attr_show: simplify patch case
  coccinelle: device_attr_show: Adapt to the latest Documentation/filesystems/sysfs.rst

media: solo6x10: replace max(a, min(b, c)) by clamp(b, a, c)

This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver.  This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):

 - the preprocessed size from 121 MiB to 4.5 MiB;

 - the build CPU time from 46.8 s to 1.6 s;

 - the build memory from 2786 MiB to 98MiB.

In fine, this allows this relatively simple C file to be built on a
32-bit system.

Reported-by: Jiri Slaby <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Cc: <[email protected]> # v6.7+
Suggested-by: David Laight <[email protected]>
Signed-off-by: Aurelien Jarno <[email protected]>
Reviewed-by: David Laight <[email protected]>
Reviewed-by: Hans Verkuil <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

coccinelle: device_attr_show: simplify patch case

Replacing the final expression argument by ... allows the format
string to have multiple arguments.

It also has the advantage of allowing the change to be recognized as
a change in a single statement, thus avoiding adding unneeded braces.

Signed-off-by: Julia Lawall <[email protected]>

execve: open the executable file before doing anything else

No point in allocating a new mm, counting arguments and environment
variables etc if we're just going to return ENOENT.

This patch does expose the fact that 'do_filp_open()' that execve() uses
is still unnecessarily expensive in the failure case, because it
allocates the 'struct file *' early, even if the path lookup (which is
heavily optimized) fails.

So that remains an unnecessary cost in the "no such executable" case,
but it's a separate issue.  Regardless, I do not want to do _both_ a
filename_lookup() and a later do_filp_open() like the origin patch by
Josh Triplett did in [1].

Reported-by: Josh Triplett <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Mateusz Guzik <[email protected]>
Cc: Al Viro <[email protected]>
Link: https://lore.kernel.org/lkml/5c7333ea4bec2fad1b47a8fa2db7c31e4ffc4f14.1663334978.git.josh@joshtriplett.org/
Link: https://lore.kernel.org/lkml/202209161637.9EDAF6B18@keescook/
Link: https://lore.kernel.org/lkml/CAHk-=wgznerM-xs+x+krDfE7eVBiy_HOam35rbsFMMOwvYuEKQ@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAHk-=whf9qLO8ipps4QhmS0BkM8mtWJhvnuDSdtw5gFjhzvKNA@mail.gmail.com/
Signed-off-by: Linus Torvalds <[email protected]>

Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for tuning for systems with fast misaligned accesses.

 - Support for SBI-based suspend.

 - Support for the new SBI debug console extension.

 - The T-Head CMOs now use PA-based flushes.

 - Support for enabling the V extension in kernel code.

 - Optimized IP checksum routines.

 - Various ftrace improvements.

 - Support for archrandom, which depends on the Zkr extension.

 - The build is no longer broken under NET=n, KUNIT=y for ports that
   don't define their own ipv6 checksum.

* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
  lib: checksum: Fix build with CONFIG_NET=n
  riscv: lib: Check if output in asm goto supported
  riscv: Fix build error on rv32 + XIP
  riscv: optimize ELF relocation function in riscv
  RISC-V: Implement archrandom when Zkr is available
  riscv: Optimize hweight API with Zbb extension
  riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
  samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
  riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
  riscv: ftrace: Make function graph use ftrace directly
  riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
  lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
  riscv: Restrict DWARF5 when building with LLVM to known working versions
  riscv: Hoist linker relaxation disabling logic into Kconfig
  kunit: Add tests for csum_ipv6_magic and ip_fast_csum
  riscv: Add checksum library
  riscv: Add checksum header
  riscv: Add static key for misaligned accesses
  asm-generic: Improve csum_fold
  RISC-V: selftests: cbo: Ensure asm operands match constraints
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Final round of fixes that came in too late to send in the first
  request.

  It's nine bug fixes and one version update (because of a bug fix) and
  one set of PCI ID additions. There's one bug fix in the core which is
  really a one liner (except that an additional sdev pointer was added
  for convenience) and the rest are in drivers"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: core: Add TMF to tmr_list handling
  scsi: core: Kick the requeue list after inserting when flushing
  scsi: fnic: unlock on error path in fnic_queuecommand()
  scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode()
  scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings
  scsi: smartpqi: Bump driver version to 2.1.26-030
  scsi: smartpqi: Fix logical volume rescan race condition
  scsi: smartpqi: Add new controller PCI IDs
  scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()
  scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan()
  scsi: ufs: core: Simplify power management during async scan

Merge tag 'sh-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux

Pull sh updates from John Paul Adrian Glaubitz:
 "Since the large patch series to convert arch/sh to device tree support
  has not been finalized yet due to various maintainers still asking for
  changes to the series, this ended up being rather small consisting of
  just two fixes.

  The first patch by Geert Uytterhoeven addresses a build failure in the
  EcoVec platform code. And the second patch by Masahiro Yamada removes
  an unnecessary $(foreach ...) found in a Makefile of the vsyscall
  code.

   - Rename missed backlight field from fbdev to dev

   - Remove unnecessary $(foreach ...)"

* tag 'sh-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: vsyscall: Remove unnecessary $(foreach ...)
  sh: ecovec24: Rename missed backlight field from fbdev to dev

Merge tag 'fbdev-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev

Pull fbdev fix from Helge Deller:
 "There were various reports from people without any graphics output on
  the screen and it turns out one commit triggers the problem.

   - Revert 'firmware/sysfb: Clear screen_info state after consuming it'"

* tag 'fbdev-for-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  Revert "firmware/sysfb: Clear screen_info state after consuming it"

Merge tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns
  processing patches, switching roles from perf-tools to perf-tools-next
  at each Linux release.

  Data profiling:

   - Associate samples that identify loads and stores with data
     structures. This uses events available on Intel, AMD and others and
     DWARF info:

       # To get memory access samples in kernel for 1 second (on Intel)
       $ perf mem record -a -K --ldlat=4 -- sleep 1

       # Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
       $ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1

     Then, amongst several modes of post processing, one can do things like:

       $ perf report -s type,typeoff --hierarchy --group --stdio
       ...
       #
       # Samples: 10K of events 'cpu/mem-loads,ldlat=4/P, cpu/mem-stores/P, dummy:u'
       # Event count (approx.): 602758064
       #
       #                    Overhead  Data Type / Data Type Offset
       # ...........................  ............................
       #
           26.09%   3.28%   0.00%     long unsigned int
              26.09%   3.28%   0.00%     long unsigned int +0 (no field)
           18.48%   0.73%   0.00%     struct page
              10.83%   0.02%   0.00%     struct page +8 (lru.next)
               3.90%   0.28%   0.00%     struct page +0 (flags)
               3.45%   0.06%   0.00%     struct page +24 (mapping)
               0.25%   0.28%   0.00%     struct page +48 (_mapcount.counter)
               0.02%   0.06%   0.00%     struct page +32 (index)
               0.02%   0.00%   0.00%     struct page +52 (_refcount.counter)
               0.02%   0.01%   0.00%     struct page +56 (memcg_data)
               0.00%   0.01%   0.00%     struct page +16 (lru.prev)
           15.37%  17.54%   0.00%     (stack operation)
              15.37%  17.54%   0.00%     (stack operation) +0 (no field)
           11.71%  50.27%   0.00%     (unknown)
              11.71%  50.27%   0.00%     (unknown) +0 (no field)

       $ perf annotate --data-type
       ...
       Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
       ============================================================================
           samples     offset       size  field
                13          0        640  struct cfs_rq         {
                 2          0         16      struct load_weight       load {
                 2          0          8          unsigned long        weight;
                 0          8          4          u32  inv_weight;
                                              };
                 0         16          8      unsigned long    runnable_weight;
                 0         24          4      unsigned int     nr_running;
                 1         28          4      unsigned int     h_nr_running;
       ...

       $ perf annotate --data-type=page --group
       Annotate type: 'struct page' in [kernel.kallsyms] (480 samples):
        event[0] = cpu/mem-loads,ldlat=4/P
        event[1] = cpu/mem-stores/P
        event[2] = dummy:u
       ===================================================================================
                samples  offset  size  field
       447  33        0       0    64  struct page     {
       108   8        0       0     8  long unsigned int  flags;
       319  13        0       8    40  union       {
       319  13        0       8    40          struct          {
       236   2        0       8    16              union       {
       236   2        0       8    16                  struct list_head       lru {
       236   1        0       8     8                      struct list_head*  next;
         0   1        0      16     8                      struct list_head*  prev;
                                                       };
       236   2        0       8    16                  struct          {
       236   1        0       8     8                      void*      __filler;
         0   1        0      16     4                      unsigned int       mlock_count;
                                                       };
       236   2        0       8    16                  struct list_head       buddy_list {
       236   1        0       8     8                      struct list_head*  next;
         0   1        0      16     8                      struct list_head*  prev;
                                                       };
       236   2        0       8    16                  struct list_head       pcp_list {
       236   1        0       8     8                      struct list_head*  next;
         0   1        0      16     8                      struct list_head*  prev;
                                                       };
                                                   };
        82   4        0      24     8              struct address_space*      mapping;
         1   7        0      32     8              union       {
         1   7        0      32     8                  long unsigned int      index;
         1   7        0      32     8                  long unsigned int      share;
                                                   };
         0   0        0      40     8              long unsigned int  private;
                                                                 };

     This uses the existing annotate code, calling objdump to do the
     disassembly, with improvements to avoid having this take too long,
     but longer term a switch to a disassembler library, possibly
     reusing code in the kernel will be pursued.

     This is the initial implementation, please use it and report
     impressions and bugs. Make sure the kernel-debuginfo packages match
     the running kernel. The 'perf report' phase for non short perf.data
     files may take a while.

     There is a great article about it on LWN:

       https://lwn.net/Articles/955709/ - "Data-type profiling for perf"

     One last test I did while writing this text, on a AMD Ryzen 5950X,
     using a distro kernel, while doing a simple 'find /' on an
     otherwise idle system resulted in:

     # uname -r
     6.6.9-100.fc38.x86_64
     # perf -vv | grep BPF_
                      bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
            bpf_skeletons: [ on  ]  # HAVE_BPF_SKEL
     # rpm -qa | grep kernel-debuginfo
     kernel-debuginfo-common-x86_64-6.6.9-100.fc38.x86_64
     kernel-debuginfo-6.6.9-100.fc38.x86_64
     #
     # perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000'
     ^C[ perf record: Woken up 1 times to write data ]
     [ perf record: Captured and wrote 2.199 MB perf.data (2913 samples) ]
     #
     # ls -la perf.data
     -rw-------. 1 root root 2346486 Jan  9 18:36 perf.data
     # perf evlist
     ibs_op//
     dummy:u
     # perf evlist -v
     ibs_op//: type: 11, size: 136, config: 0, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1
     dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
     #
     # perf report -s type,typeoff --hierarchy --group --stdio
     # Total Lost Samples: 0
     #
     # Samples: 2K of events 'ibs_op//, dummy:u'
     # Event count (approx.): 1904553038
     #
     #            Overhead  Data Type / Data Type Offset
     # ...................  ............................
     #
         73.70%   0.00%     (unknown)
            73.70%   0.00%     (unknown) +0 (no field)
          3.01%   0.00%     long unsigned int
             3.00%   0.00%     long unsigned int +0 (no field)
             0.01%   0.00%     long unsigned int +2 (no field)
          2.73%   0.00%     struct task_struct
             1.71%   0.00%     struct task_struct +52 (on_cpu)
             0.38%   0.00%     struct task_struct +2104 (rcu_read_unlock_special.b.blocked)
             0.23%   0.00%     struct task_struct +2100 (rcu_read_lock_nesting)
             0.14%   0.00%     struct task_struct +2384 ()
             0.06%   0.00%     struct task_struct +3096 (signal)
             0.05%   0.00%     struct task_struct +3616 (cgroups)
             0.05%   0.00%     struct task_struct +2344 (active_mm)
             0.02%   0.00%     struct task_struct +46 (flags)
             0.02%   0.00%     struct task_struct +2096 (migration_disabled)
             0.01%   0.00%     struct task_struct +24 (__state)
             0.01%   0.00%     struct task_struct +3956 (mm_cid_active)
             0.01%   0.00%     struct task_struct +1048 (cpus_ptr)
             0.01%   0.00%     struct task_struct +184 (se.group_node.next)
             0.01%   0.00%     struct task_struct +20 (thread_info.cpu)
             0.00%   0.00%     struct task_struct +104 (on_rq)
             0.00%   0.00%     struct task_struct +2456 (pid)
          1.36%   0.00%     struct module
             0.59%   0.00%     struct module +952 (kallsyms)
             0.42%   0.00%     struct module +0 (state)
             0.23%   0.00%     struct module +8 (list.next)
             0.12%   0.00%     struct module +216 (syms)
          0.95%   0.00%     struct inode
             0.41%   0.00%     struct inode +40 (i_sb)
             0.22%   0.00%     struct inode +0 (i_mode)
             0.06%   0.00%     struct inode +76 (i_rdev)
             0.06%   0.00%     struct inode +56 (i_security)
     <SNIP>

  perf top/report:

   - Don't ignore job control, allowing control+Z + bg to work.

   - Add s390 raw data interpretation for PAI (Processor Activity
     Instrumentation) counters.

  perf archive:

   - Add new option '--all' to pack perf.data with DSOs.

   - Add new option '--unpack' to expand tarballs.

  Initialization speedups:

   - Lazily initialize zstd streams to save memory when not using it.

   - Lazily allocate/size mmap event copy.

   - Lazy load kernel symbols in 'perf record'.

   - Be lazier in allocating lost samples buffer in 'perf record'.

   - Don't synthesize BPF events when disabled via the command line
     (perf record --no-bpf-event).

  Assorted improvements:

   - Show note on AMD systems that the :p, :pp, :ppp and :P are all the
     same, as IBS (Instruction Based Sampling) is used and it is
     inherentely precise, not having levels of precision like in Intel
     systems.

   - When 'cycles' isn't available, fall back to the "task-clock" event
     when not system wide, not to 'cpu-clock'.

   - Add --debug-file option to redirect debug output, e.g.:

       $ perf --debug-file /tmp/perf.log record -v true

   - Shrink 'struct map' to under one cacheline by avoiding function
     pointers for selecting if addresses are identity or DSO relative,
     and using just a byte for some boolean struct members.

   - Resolve the arch specific strerrno just once to use in
     perf_env__arch_strerrno().

   - Reduce memory for recording PERF_RECORD_LOST_SAMPLES event.

  Assorted fixes:

   - Fix the default 'perf top' usage on Intel hybrid systems, now it
     starts with a browser showing the number of samples for Efficiency
     (cpu_atom/cycles/P) and Performance (cpu_core/cycles/P). This
     behaviour is similar on ARM64, with its respective set of
     big.LITTLE processors.

   - Fix segfault on build_mem_topology() error path.

   - Fix 'perf mem' error on hybrid related to availability of mem event
     in a PMU.

   - Fix missing reference count gets (map, maps) in the db-export code.

   - Avoid recursively taking env->bpf_progs.lock in the 'perf_env'
     code.

   - Use the newly introduced maps__for_each_map() to add missing
     locking around iteration of 'struct map' entries.

   - Parse NOTE segments until the build id is found, don't stop on the
     first one, ELF files may have several such NOTE segments.

   - Remove 'egrep' usage, its deprecated, use 'grep -E' instead.

   - Warn first about missing libelf, not libbpf, that depends on
     libelf.

   - Use alternative to 'find ... -printf' as this isn't supported in
     busybox.

   - Address python 3.6 DeprecationWarning for string scapes.

   - Fix memory leak in uniq() in libsubcmd.

   - Fix man page formatting for 'perf lock'

   - Fix some spelling mistakes.

  perf tests:

   - Fail shell tests that needs some symbol in perf itself if it is
     stripped. These tests check if a symbol is resolved, if some hot
     function is indeed detected by profiling, etc.

   - The 'perf test sigtrap' test is currently failing on PREEMPT_RT,
     skip it if sleeping spinlocks are detected (using BTF) and point to
     the mailing list discussion about it. This test is also being
     skipped on several architectures (powerpc, s390x, arm and aarch64)
     due to other pending issues with intruction breakpoints.

   - Adjust test case perf record offcpu profiling tests for s390.

   - Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest,
     addressing issues caused by the fallback from cycles to task-clock
     done in this release.

   - Fix mask for VG register in the user-regs test.

   - Use shellcheck on 'perf test' shell scripts automatically to make
     sure changes don't introduce things it flags as problematic.

   - Add option to change objdump binary and allow it to be set via
     'perf config'.

   - Add basic 'perf script', 'perf list --json" and 'perf diff' tests.

   - Basic branch counter support.

   - Make DSO tests a suite rather than individual.

   - Remove atomics from test_loop to avoid test failures.

   - Fix call chain match on powerpc for the record+probe_libc_inet_pton
     test.

   - Improve Intel hybrid tests.

  Vendor event files (JSON):

  powerpc:

   - Update datasource event name to fix duplicate events on IBM's
     Power10.

   - Add PVN for HX-C2000 CPU with Power8 Architecture.

  Intel:

   - Alderlake/rocketlake metric fixes.

   - Update emeraldrapids events to v1.02.

   - Update icelakex events to v1.23.

   - Update sapphirerapids events to v1.17.

   - Add skx, clx, icx and spr upi bandwidth metric.

  AMD:

   - Add Zen 4 memory controller events.

  RISC-V:

   - Add StarFive Dubhe-80 and Dubhe-90 JSON files.
       https://www.starfivetech.com/en/site/cpu-u

   - Add T-HEAD C9xx JSON file.
       https://github.com/riscv-software-src/opensbi/blob/master/docs/platform/thead-c9xx.md

  ARM64:

   - Remove UTF-8 characters from cmn.json, that were causing build
     failure in some distros.

   - Add core PMU events and metrics for Ampere One X.

   - Rename Ampere One's BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT

  libperf:

   - Rename several perf_cpu_map constructor names to clarify what they
     really do.

   - Ditto for some other methods, coping with some issues in their
     semantics, like perf_cpu_map__empty() ->
     perf_cpu_map__has_any_cpu_or_is_empty().

   - Document perf_cpu_map__nr()'s behavior

  perf stat:

   - Exit if parse groups fails.

   - Combine the -A/--no-aggr and --no-merge options.

   - Fix help message for --metric-no-threshold option.

  Hardware tracing:

  ARM64 CoreSight:

   - Bump minimum OpenCSD version to ensure a bugfix is present.

   - Add 'T' itrace option for timestamp trace

   - Set start vm addr of exectable file to 0 and don't ignore first
     sample on the arm-cs-trace-disasm.py 'perf script'"

* tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
  MAINTAINERS: Add Namhyung as tools/perf/ co-maintainer
  perf test: test case 'Setup struct perf_event_attr' fails on s390 on z/vm
  perf db-export: Fix missing reference count get in call_path_from_sample()
  perf tests: Add perf script test
  libsubcmd: Fix memory leak in uniq()
  perf TUI: Don't ignore job control
  perf vendor events intel: Update sapphirerapids events to v1.17
  perf vendor events intel: Update icelakex events to v1.23
  perf vendor events intel: Update emeraldrapids events to v1.02
  perf vendor events intel: Alderlake/rocketlake metric fixes
  perf x86 test: Add hybrid test for conflicting legacy/sysfs event
  perf x86 test: Update hybrid expectations
  perf vendor events amd: Add Zen 4 memory controller events
  perf stat: Fix hard coded LL miss units
  perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event
  perf env: Avoid recursively taking env->bpf_progs.lock
  perf annotate: Add --insn-stat option for debugging
  perf annotate: Add --type-stat option for debugging
  perf annotate: Support event group display
  perf annotate: Add --data-type option
  ...

Merge tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull strlcpy removal from Kees Cook:
 "As promised, this is 'part 2' of the hardening tree, late in -rc1 now
  that all the other trees with strlcpy() removals have landed. One new
  user appeared (in bcachefs) but was a trivial refactor. The kernel is
  now free of the strlcpy() API!

   - Remove of the final (very recent) user of strlcpy() (in bcachefs)

   - Remove the strlcpy() API. Long live strscpy()"

* tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  string: Remove strlcpy()
  bcachefs: Replace strlcpy() with strscpy()

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "I think the main one is fixing the dynamic SCS patching when full LTO
  is enabled (clang was silently getting this horribly wrong), but it's
  all good stuff.

  Rob just pointed out that the fix to the workaround for erratum
  #2966298 might not be necessary, but in the worst case it's harmless
  and since the official description leaves a little to be desired here,
  I've left it in.

  Summary:

   - Fix shadow call stack patching with LTO=full

   - Fix voluntary preemption of the FPSIMD registers from assembly code

   - Fix workaround for A520 CPU erratum #2966298 and extend to A510

   - Fix SME issues that resulted in corruption of the register state

   - Minor fixes (missing includes, formatting)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix silcon-errata.rst formatting
  arm64/sme: Always exit sme_alloc() early with existing storage
  arm64/fpsimd: Remove spurious check for SVE support
  arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace
  arm64: entry: simplify kernel_exit logic
  arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
  arm64: errata: Add Cortex-A510 speculative unprivileged load workaround
  arm64: Rename ARM64_WORKAROUND_2966298
  arm64: fpsimd: Bring cond_yield asm macro in line with new rules
  arm64: scs: Work around full LTO issue with dynamic SCS
  arm64: irq: include <linux/cpumask.h>

Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Raise minimum clang version to 18.0.0

 - Enable initial Rust support for LoongArch

 - Add built-in dtb support for LoongArch

 - Use generic interface to support crashkernel=X,[high,low]

 - Some bug fixes and other small changes

 - Update the default config file.

* tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
  MAINTAINERS: Add BPF JIT for LOONGARCH entry
  LoongArch: Update Loongson-3 default config file
  LoongArch: BPF: Prevent out-of-bounds memory access
  LoongArch: BPF: Support 64-bit pointers to kfuncs
  LoongArch: Fix definition of ftrace_regs_set_instruction_pointer()
  LoongArch: Use generic interface to support crashkernel=X,[high,low]
  LoongArch: Fix and simplify fcsr initialization on execve()
  LoongArch: Let cores_io_master cover the largest NR_CPUS
  LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE
  LoongArch: Add a missing call to efi_esrt_init()
  LoongArch: Parsing CPU-related information from DTS
  LoongArch: dts: DeviceTree for Loongson-2K2000
  LoongArch: dts: DeviceTree for Loongson-2K1000
  LoongArch: dts: DeviceTree for Loongson-2K0500
  LoongArch: Allow device trees be built into the kernel
  dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names
  dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names
  dt-bindings: loongarch: Add Loongson SoC boards compatibles
  dt-bindings: loongarch: Add CPU bindings for LoongArch
  LoongArch: Enable initial Rust support
  ...

Revert "firmware/sysfb: Clear screen_info state after consuming it"

This reverts commit df67699c9cb0ceb70f6cc60630ca938c06773eda.

Jens Axboe reported a regression that his machine is failing to show a
console, or in fact anything, on current -git. There's no output and no
console after:

Loading Linux 6.7.0+ ...
Loading initial ramdisk ...

Signed-off-by: Helge Deller <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Jens Axboe <[email protected]>