On architectures for which access to GPU memory is non-coherent,
caches need to be flushed and invalidated explicitly when BO control
changes between CPU and GPU.
This patch adds buffer synchronization functions which invokes the
correct API (PCI or DMA) to ensure synchronization is effective.
Based on the TTM DMA cache helper patches by Lucas Stach.
drm/nouveau: allocate GPFIFOs and fences coherently
Specify TTM_PL_FLAG_UNCACHED when allocating GPFIFOs and fences to
allow them to be safely accessed by the kernel without being synced
on non-coherent architectures.
Allow nouveau_bo_new() to recognize the TTM_PL_FLAG_UNCACHED flag, which
means that we want the allocated BO to be perfectly coherent between the
CPU and GPU. This is useful on non-coherent architectures for which we
do not want to manually sync some rarely-accessed buffers: typically,
fences and pushbuffers.
A TTM BO allocated with the TTM_PL_FLAG_UNCACHED on a non-coherent
architecture will be populated using the DMA API, and accesses to it
performed using the coherent mapping performed by dma_alloc_coherent().
Add a function allowing us to know whether a device is CPU-coherent,
i.e. accesses performed by the CPU on GPU-mapped buffers will
be immediately visible on the GPU side and vice-versa.
For now, a device is considered to be coherent if it uses the PCI bus on
a non-ARM architecture.
Pinned BOs are supposed to remain in their current location until
unpinned. Display a warning for the supposedly-erroneous case where we
are trying to move such objects.
Ben Skeggs [Thu, 28 Aug 2014 03:00:30 +0000 (13:00 +1000)]
drm/gm204/disp: some magic that fixes bringup of uninitialised outputs
Probably missing something here, doesn't make a lot of sense to write
or+link data into a register whose offset is calculated by the same
or+link info..
This is the all I've witnessed the binary driver and vbios doing so
far, so it'll do.
Ben Skeggs [Thu, 28 Aug 2014 01:52:12 +0000 (11:52 +1000)]
drm/gf110-/disp: magic that might help some tmds issues
The binary driver has been doing this since GF119, and we've somehow
gotten away with it. But, TMDS that hasn't been initialised already
by the x86 vbios code is distorted without it on GM204.
Ben Skeggs [Thu, 21 Aug 2014 00:39:01 +0000 (10:39 +1000)]
drm/nouveau/bios: log if auxch accesses fail, also return 0x00 from rd when it does
Logging at trace level, rather than as en error, as it seems conceivable
that failure could be normal under certain circumstances (new bios,
older sink that doesn't support a particular DPCD address)
Ben Skeggs [Wed, 17 Sep 2014 23:24:10 +0000 (09:24 +1000)]
drm/nouveau/bios: split out shadow methods
We're about to need to be able to fetch additional chunks of data beyond
the primary bios image, which makes fetching a lot more complicated.
This splits out the verious shadowing routines to be nothing more than
very dumb "fetch this much data from this offset" routines, and leaves
the logic of what and how much to fetch in common code.
Vince Hsu [Tue, 2 Dec 2014 04:50:32 +0000 (12:50 +0800)]
soc/tegra: fuse: export tegra_sku_info
Some Tegra drivers might be compiled as kernel modules, and they need the
fuse information for initialization. One example is the GK20A Nouveau
driver. It needs the GPU speedo value to calculate frequency-voltage
table. So export the tegra_sku_info.
Dave Airlie [Mon, 1 Dec 2014 22:59:34 +0000 (08:59 +1000)]
Merge tag 'topic/core-stuff-2014-11-28' of git://anongit.freedesktop.org/drm-intel into drm-next
So here's a pile of atomic fixes and improvements from various people.
There's still more patches in-flight, so I think I'll keep collecting them
in a separate branch.
* tag 'topic/core-stuff-2014-11-28' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: clear plane's CRTC and FB when shutting down
drm: Handle atomic state properly in kms getfoo ioctl
drm: use mode_object_find helpers
drm: fix indentation
drm/msm: switch to atomic-helpers iterator macros
drm/atomic: add plane iterator macros
drm/atomic: track bitmask of planes attached to crtc
drm: Free atomic state during cleanup
drm: Make drm_atomic.h standalone includible
drm: Make drm_atomic_helper.h standalone includible
drm/plane: Add missing kerneldoc
drm/plane: Pass old state to ->atomic_update()
drm/atomic_helper: Cope with plane->crtc == NULL in disable helper
drm/atomic: Drop per-plane locking TODO
drm/atomic-helper: Skip vblank waits for unchanged fbs
drm: Document that drm_dev_alloc doesn't need a parent
Laurent Pinchart [Thu, 27 Nov 2014 15:19:13 +0000 (17:19 +0200)]
ARM: shmobile: marzen: Remove DU platform device
Platform data support has been removed from the DU driver, drop DU
support from the legacy Marzen board file. The multiplatform DT-based
Marzen support should be used instead.
Laurent Pinchart [Thu, 27 Nov 2014 15:19:12 +0000 (17:19 +0200)]
ARM: shmobile: lager: Remove DU platform device
Platform data support has been removed from the DU driver, drop DU
support from the legacy Lager board file. The multiplatform DT-based
Lager support should be used instead.
Linus Torvalds [Mon, 1 Dec 2014 00:21:37 +0000 (16:21 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Two i915 regressions and one dual-gpu laptop radeon fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
drm/i915: Cancel vdd off work before suspend
drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
Chris Mason [Sun, 30 Nov 2014 13:56:33 +0000 (08:56 -0500)]
btrfs: zero out left over bytes after processing compression streams
Don Bailey noticed that our page zeroing for compression at end-io time
isn't complete. This reworks a patch from Linus to push the zeroing
into the zlib and lzo specific functions instead of trying to handle the
corners inside btrfs_decompress_buf2page
Linus Torvalds [Sat, 29 Nov 2014 18:49:24 +0000 (10:49 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three fixlets from the ARM SoC camp:
- correct irqdomain initialization for atmel-aic
- correct error handling for device tree parsing in bcm controllers"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_map
irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_map
irqchip: atmel-aic: Fix irqdomain initialization
Linus Torvalds [Sat, 29 Nov 2014 18:15:31 +0000 (10:15 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of ten fixes: 8 for UFS including four static checker
warnings, a potential null deref in the voltage regulator code, a race
on module unload, a ref counting fix on the well known LUNs which made
it impossible to remove the ufs module and fix to correct the
information in pwr_info.
In addition to UFS, there's a blacklist for the Intel Multi-Flex array
which chokes on report supported operation codes and a fix to an oops
in bnx2fc caused by shared skbs"
[ For us non-SCSI people: "UFS" here is "Universal Flash Storage" not
the filesystem. - Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ufs: fix NULL dereference when no regulators are defined
ufs: ensure clk gating work is finished before module unloading
scsi: ufs: fix static checker warning in ufshcd_parse_clock_info
scsi: ufs: fix static checker warning in __ufshcd_setup_clocks
scsi: ufs: fix static checker warning in ufshcd_populate_vreg
scsi: ufs: fix static checker errors in ufshcd_system_suspend
ufs: fix power info after link start-up
ufs: fix reference counting of W-LUs
scsi: add Intel Multi-Flex to scsi scan blacklist
bnx2fc: do not add shared skbs to the fcoe_rx_list
Linus Torvalds [Sat, 29 Nov 2014 00:08:09 +0000 (16:08 -0800)]
Merge tag 'staging-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some staging and IIO driver fixes for 3.18-rc7 that resolve a
number of reported issues, and a new device id for a staging wireless
driver.
All of these have been in linux-next"
* tag 'staging-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID for DLink GO-USB-N150
staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd
iio: accel: bmc150: set low default thresholds
iio: accel: bmc150: Fix iio_event_spec direction
iio: accel: bmc150: Send x, y and z motion separately
iio: accel: bmc150: Error handling when mode set fails
iio: gyro: bmg160: Fix iio_event_spec direction
iio: gyro: bmg160: Send x, y and z motion separately
iio: gyro: bmg160: Don't let interrupt mode to be open drain
iio: gyro: bmg160: Error handling when mode set fails
iio: adc: men_z188_adc: Add terminating entry for men_z188_ids
iio: accel: kxcjk-1013: Fix kxcjk10013_set_range
iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask
Linus Torvalds [Fri, 28 Nov 2014 23:55:14 +0000 (15:55 -0800)]
Merge tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes and new device ids for 3.18-rc7.
Full details are in the shortlog, and all of these have been in the
linux-next tree for a while"
* tag 'usb-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000
usb: xhci: rework root port wake bits if controller isn't allowed to wakeup
USB: xhci: Reset a halted endpoint immediately when we encounter a stall.
Revert "xhci: clear root port wake on bits if controller isn't wake-up capable"
USB: xhci: don't start a halted endpoint before its new dequeue is set
USB: uas: Add no-uas quirk for Hitachi usb-3 enclosures 4971:1012
USB: ssu100: fix overrun-error reporting
USB: keyspan: fix overrun-error reporting
USB: keyspan: fix tty line-status reporting
usb: serial: ftdi_sio: add PIDs for Matrix Orbital products
usb: dwc3: ep0: fix for dead code
USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick
Linus Torvalds [Fri, 28 Nov 2014 22:00:33 +0000 (14:00 -0800)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal fixes from Eduardo Valentin:
"In this -rc still very minor changes:
- Lee Jones fixes compilation warning in sti thermal driver
- Marjus Elfring removes unnecessary checks in exynos thermal driver
(as per coccinelle)
- Now we always update cpufreq policies, and thus get (hopefully)
always in sync with cpufreq, thanks to Yadwinder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: Exynos: Deletion of unnecessary checks before two function calls
thermal: sti: Ignore suspend/resume functions when !PM_SLEEP
thermal: cpu_cooling: Update always cpufreq policy with thermal constraints
Linus Torvalds [Fri, 28 Nov 2014 21:54:53 +0000 (13:54 -0800)]
Merge tag 'sound-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No excitement, here are only minor fixes: an endian fix for the new
DSD format we added in 3.18, a fix for HP mute LED, and a fix for
Native Instrument quirk"
* tag 'sound-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Add big-endian DSD sample formats and fix XMOS DSD sample format
ALSA: hda - One more HP machine needs to change mute led quirk
ALSA: usb-audio: Use snd_usb_ctl_msg() for Native Instruments quirk
Linus Torvalds [Fri, 28 Nov 2014 21:34:32 +0000 (13:34 -0800)]
Merge tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Not much interesting going on fixes-wise for us this week, as it
should be for an -rc7. I'm not expecting Olof to work much over
Thanksgiving weekend, so I decided to take over again and push these
out to you.
Just four simple fixes this week:
- one missing of_node_put() on armv7 based mvebu
- forcing the USB host into the right mode on Chromebook
(exynos5-snow)
- enabling two important drivers for exynos_defconfig
- fixing a noncritical bug for tegra that would cause a regression
with common code patches queued for 3.19"
* tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: irq: fix buggy usage of irq_data irq field
ARM: exynos_defconfig: Enable max77802 rtc and clock drivers
ARM: dts: Explicitly set dr_mode on exynos5250-snow
ARM: mvebu: add missing of_node_put() call in coherency.c
Linus Torvalds [Fri, 28 Nov 2014 21:32:47 +0000 (13:32 -0800)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Another round of relatively small ARM fixes.
Thomas spotted that the strex backoff delay bit was a disable bit, so
it needed to be clear for this to work. Vladimir spotted that using a
restart block for the cache flush operation would return -EINTR, which
userspace was not expecting. Dmitry spotted that the auxiliary
control register accesses for Xscale were not correct"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8226/1: cacheflush: get rid of restarting block
ARM: 8222/1: mvebu: enable strex backoff delay
ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
Dave Airlie [Fri, 28 Nov 2014 03:56:31 +0000 (13:56 +1000)]
Merge tag 'drm-intel-fixes-2014-11-27' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Two regression fixes from Ville.
* tag 'drm-intel-fixes-2014-11-27' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Cancel vdd off work before suspend
drm/i915: Ignore SURFLIVE and flip counter when the GPU gets reset
Linus Torvalds [Fri, 28 Nov 2014 02:32:49 +0000 (18:32 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull mips fixes from Ralf Baechle:
"The hopefully final round of fixes for 3.18:
- Fix a number of build errors affecting particular configurations.
- Handle EVA correctly when flushing a signal trampoline and dcache
lines.
- Fix printks printing jibberish.
- Handle 64 bit memory addresses correctly when adding memory chunk
on 32 bit kernels.
- Fix a race condition in the hardware tablewalker code"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers
MIPS: Fix address type used for early memory detection.
MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected.
MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASE
MIPS: Netlogic: handle modular AHCI builds
MIPS: Netlogic: handle modular USB case
MIPS: Loongson: Make platform serial setup always built-in.
MIPS: fix EVA & non-SMP non-FPU FP context signal handling
MIPS: cpu-probe: Set the FTLB probability bit on supported cores
MIPS: BMIPS: Fix ".previous without corresponding .section" warnings
MIPS: uaccess.h: Fix strnlen_user comment.
MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line
MIPS: Fix info about plat_setup in arch_mem_init comment
MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.c
MIPS: SEAD3: Fix LED device registration.
MIPS: Fix a copy & paste error in unistd.h
Linus Torvalds [Fri, 28 Nov 2014 02:23:41 +0000 (18:23 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
"Here are five fixes for you to pull please.
They're all CC'ed to stable except the "Fix PE state format" one which
went in this release"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc: 32 bit getcpu VDSO function uses 64 bit instructions
powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE
powerpc/eeh: Fix PE state format
powerpc/pseries: Fix endiannes issue in RTAS call from xmon
powerpc/powernv: Fix the hmi event version check.
Pull sparc fixlet from David Miller:
"Aparc fix to add dma_cache_sync(), even if a nop it should be provided
if dma_{alloc,free}_noncoherent() is provided too"
Pull networking fixes from David Miller:
"Several small fixes here:
1) Don't crash in tg3 driver when the number of tx queues has been
configured to be different from the number of rx queues. From
Thadeu Lima de Souza Cascardo.
2) VLAN filter not disabled properly in promisc mode in ixgbe driver,
from Vlad Yasevich.
3) Fix OOPS on dellink op in VTI tunnel driver, from Xin Long.
4) IPV6 GRE driver WCCP code checks skb->protocol for ETH_P_IP
instead of ETH_P_IPV6, whoops. From Yuri Chislov.
5) Socket matching in ping driver is buggy when packet AF does not
match socket's AF. Fix from Jane Zhou.
6) Fix checksum calculation errors in VXLAN due to where the
udp_tunnel6_xmit_skb() helper gets it's saddr/daddr from. From
Alexander Duyck.
7) Fix 5G detection problem in rtlwifi driver, from Larry Finger.
8) Fix NULL deref in tcp_v{4,6}_send_reset, from Eric Dumazet.
9) Various missing netlink attribute verifications in bridging code,
from Thomas Graf.
10) tcp_recvmsg() unconditionally calls ipv4 ip_recv_error even for
ipv6 sockets, whoops. Fix from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks
bridge: Sanitize IFLA_EXT_MASK for AF_BRIDGE:RTM_GETLINK
bridge: Add missing policy entry for IFLA_BRPORT_FAST_LEAVE
net: Check for presence of IFLA_AF_SPEC
net: Validate IFLA_BRIDGE_MODE attribute length
bridge: Validate IFLA_BRIDGE_FLAGS attribute length
stmmac: platform: fix default values of the filter bins setting
net/mlx4_core: Limit count field to 24 bits in qp_alloc_res
net: dsa: bcm_sf2: reset switch prior to initialization
net: dsa: bcm_sf2: fix unmapping registers in case of errors
tg3: fix ring init when there are more TX than RX channels
tcp: fix possible NULL dereference in tcp_vX_send_reset()
rtlwifi: Change order in device startup
rtlwifi: rtl8821ae: Fix 5G detection problem
Revert "netfilter: conntrack: fix race in __nf_conntrack_confirm against get_next_corpse"
vxlan: Fix boolean flip in VXLAN_F_UDP_ZERO_CSUM6_[TX|RX]
ip6_udp_tunnel: Fix checksum calculation
net-timestamp: Fix a documentation typo
net/ping: handle protocol mismatching scenario
af_packet: fix sparse warning
...
Linus Torvalds [Fri, 28 Nov 2014 01:55:42 +0000 (17:55 -0800)]
Merge tag 'spi-v3.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's a couple of driver fixes here, plus one core fix for the DMA
mapping which wasn't doing the right thing for vmalloc()ed addresses
that hadn't been through kmap(). It's fairly rare to use vmalloc()
with SPI and it's a subset of those users who might fail so it's
unsurprising that this wasn't noticed sooner"
* tag 'spi-v3.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sirf: fix word width configuration
spi: Fix mapping from vmalloc-ed buffer to scatter list
spi: dw: Fix dynamic speed change.
Linus Torvalds [Fri, 28 Nov 2014 01:51:50 +0000 (17:51 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
"The main change is to fix breakage in Elantech driver introduced by
the recent commit adding trackpoint reporting to protocol v4. Now we
are trusting the hardware to advertise the trackpoint properly and do
not try to decode the data as trackpoint if firmware told us it is not
present"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - use proper endpoint type
Input: elantech - trust firmware about trackpoint presence
Input: synaptics - adjust min/max on Thinkpad E540
Leonid Yegoshin [Thu, 27 Nov 2014 11:13:08 +0000 (11:13 +0000)]
MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers
There is a potential race when probing the TLB in TLBL/M/S exception
handlers for a matching entry. Between the time we hit a TLBL/S/M
exception and the time we get to execute the TLBP instruction, the
HTW may have replaced the TLB entry we are interested in hence the TLB
probe may fail. However, in the existing handlers, we never checked the
status of the TLBP (ie check the result in the C0/Index register). We
fix this by adding such a check when the core implements the HTW. If
we couldn't find a matching entry, we return back and try again.
Vladimir Murzin [Thu, 27 Nov 2014 10:39:04 +0000 (11:39 +0100)]
ARM: 8226/1: cacheflush: get rid of restarting block
We cannot restart cacheflush safely if a process provides user-defined
signal handler and signal is pending. In this case -EINTR is returned
and it is expected that process re-invokes syscall. However, there are
a few problems with that:
* looks like nobody bothers checking return value from cacheflush
* but if it did, we don't provide the restart address for that, so the
process has to use the same range again
* ...and again, what might lead to looping forever
So, remove cacheflush restarting code and terminate cache flushing
as early as fatal signal is pending.
Thomas Petazzoni [Tue, 25 Nov 2014 17:43:15 +0000 (18:43 +0100)]
ARM: 8222/1: mvebu: enable strex backoff delay
Under extremely rare conditions, in an MPCore node consisting of at
least 3 CPUs, two CPUs trying to perform a STREX to data on the same
shared cache line can enter a livelock situation.
This patch enables the HW mechanism that overcomes the bug. This fixes
the incorrect setup of the STREX backoff delay bit due to a wrong
description in the specification.
Note that enabling the STREX backoff delay mechanism is done by
leaving the bit *cleared*, while the bit was currently being set by
the proc-v7.S code.
[Thomas: adapt to latest mainline, slightly reword the commit log, add
stable markers.]
Rob Clark [Wed, 26 Nov 2014 23:58:04 +0000 (18:58 -0500)]
drm/atomic: clear plane's CRTC and FB when shutting down
Otherwise we'd still end up w/ the plane attached to the CRTC, and
seemingly active, but without an FB. Which ends up going *boom*
in the drivers.
Slightly modified version of Daniel's irc suggestion.
Note that the big problem isn't drivers going *boom* here (since we
already have the situation of planes being left enabled when the crtc
goes down). The real issue is that the core assumes the primary plane
always goes down when calling ->set_config with a NULL mode. Ignoring
that assumption leads to the legacy state pointers plane->fb/crtc
getting out of sync with atomic, and that then leads to the subsequent
*boom* all over the place.
CC: Daniel Vetter <[email protected]> Signed-off-by: Rob Clark <[email protected]>
[danvet: Drop my opinion of what's going sidewides here into the
commit message as a note.] Signed-off-by: Daniel Vetter <[email protected]>
Daniel Vetter [Tue, 25 Nov 2014 22:50:05 +0000 (23:50 +0100)]
drm: Handle atomic state properly in kms getfoo ioctl
So the problem with async commit (especially async modeset commit) is
that the legacy pointers only get updated after the point of no
return, in the async part of the modeset sequence. At least as
implemented by the current helper functions. This is done in the
set_routing_links function in drm_atomic_helper.c.
Which also means that access isn't protected by locks but only
coordinated by synchronizing with async workers. No problem thus far,
until we lock at the getconnector/encoder ioctls.
So fix this up by adding special cases for atomic drivers: For those
we need to look at state objects. Unfortunately digging out the
correct encoder->crtc link is a bit of work, so wrap this up in a
helper function.
Moving the assignments of connector->encoder and encoder->crtc earlier
isn't a good idea because the point of the atomic helpers is that we
stage the state updates. That way the disable functions can still
inspect the links and rely upon them.
v2: Extract full encoder->crtc lookup into helper (Rob).
v3: Extract drm_connector_get_encoder too since - we need to always
return state->best_encoder when there is a state otherwise we might
return stale data if there's a pending async disable (and chase
unlocked pointers, too). Same issue with encoder_get_crtc but there
it's a bit more tricky to handle.
Rob Clark [Wed, 26 Nov 2014 01:29:46 +0000 (20:29 -0500)]
drm/atomic: add plane iterator macros
Add helper macros to iterate the current, or incoming set of planes
attached to a crtc. These helpers are only available for drivers
converted to use atomic-helpers.
Signed-off-by: Rob Clark <[email protected]>
[danvet: Squash in fixup from Rob to move the planemask iterator to
drm_crtc.h and document it. That one is needed by the atomic ioctl so
can't be in a helper library.] Signed-off-by: Daniel Vetter <[email protected]>
Rob Clark [Fri, 21 Nov 2014 20:28:31 +0000 (15:28 -0500)]
drm/atomic: track bitmask of planes attached to crtc
Chasing plane->state->crtc of planes that are *not* part of the same
atomic update is racy, making it incredibly awkward (or impossible) to
do something simple like iterate over all planes and figure out which
ones are attached to a crtc.
Solve this by adding a bitmask of currently attached planes in the
crtc-state.
Note that the transitional helpers do not maintain the plane_mask. But
they only support the legacy ioctls, which have sufficient brute-force
locking around plane updates that they can continue to loop over all
planes to see what is attached to a crtc the old way.
Signed-off-by: Rob Clark <[email protected]>
[danvet:
- Drop comments about locking in set_crtc_for_plane since they're a
bit misleading - we already should hold lock for the current crtc.
- Also WARN_ON if get_state on the old crtc fails since that should
have been done already.
- Squash in fixup to check get_plane_state return value, reported by
Dan Carpenter and acked by Rob Clark.] Signed-off-by: Daniel Vetter <[email protected]>
Arnd Bergmann [Thu, 27 Nov 2014 13:26:52 +0000 (14:26 +0100)]
Merge tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes
Pull "Samsung defconfig update for v3.18" from Kukjin Kim:
- enable max77802 rtc and clock drivers for exynos_defconfig
: enable the kernel config options to have the drivers for
max77802 including rtc and 2-ch 32kHz clock outputs
* tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: exynos_defconfig: Enable max77802 rtc and clock drivers
Marc Zyngier [Wed, 26 Nov 2014 17:55:31 +0000 (17:55 +0000)]
ARM: tegra: irq: fix buggy usage of irq_data irq field
The crazy gic_arch_extn thing that Tegra uses contains multiple
references to the irq field in struct irq_data, and uses this
to directly poke hardware register.
But irq is the *virtual* irq number, something that has nothing
to do with the actual HW irq (stored in the hwirq field). And once
we put the stacked domain code in action, the whole thing explodes,
as these two values are *very* different:
Alex Deucher [Fri, 14 Nov 2014 17:08:34 +0000 (12:08 -0500)]
drm/radeon: report disconnected for LVDS/eDP with PX if ddc fails
If ddc fails, presumably the i2c mux (and hopefully the signal
mux) are switched to the other GPU so don't fetch the edid from
the vbios so that the connector reports disconnected.
Gavin Shan [Mon, 24 Nov 2014 22:26:59 +0000 (09:26 +1100)]
powerpc/powernv: Replace OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE
The flag passed to ioda_eeh_phb_reset() should be EEH_RESET_DEACTIVATE,
which is translated to OPAL_DEASSERT_RESET or something else by the
EEH backend accordingly.
The patch replaces OPAL_DEASSERT_RESET with EEH_RESET_DEACTIVATE for
ioda_eeh_phb_reset().
Dave Airlie [Wed, 26 Nov 2014 22:36:19 +0000 (08:36 +1000)]
Merge branch 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev into drm-next
The branch is based on a merge of drm-next and Simon's tags/renesas-dt-du-for-
v3.19 available at
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git, the latter
having been pulled in the ARM SoC tree for v3.19.
Compared to v1, I've rebased my branch on a later drm-next, added Julia's
error return code fix, and documented the "drm: Decouple EDID parsing from I2C
adapter" patch properly.
v1:
Here's a pull request that adds HDMI support to the R-Car DU driver, including
a new slave encoder driver for the adv7511.
* 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev:
drm: Add adv7511 encoder driver
video: Add ADV751[13] DT bindings documentation
drm: Decouple EDID parsing from I2C adapter
drm: rcar-du: Add HDMI encoder and connector support
drm: rcar-du: Replace drm_encoder with drm_slave_encoder
drm: rcar-du: Replace direct DRM encoder access with cast macro
drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init()
drm: rcar-du: Remove platform data support
drm: rcar-du: fix error return code
ARM: shmobile: koelsch: Enable DU device in DT
ARM: shmobile: koelsch-reference: Remove DU platform device
ARM: shmobile: lager: Enable DU device in DT
ARM: shmobile: lager-reference: Remove DU platform device
ARM: shmobile: marzen: Enable DU device in DT
ARM: shmobile: dts: Add common file for AA104XD12 panel
ARM: shmobile: r8a7791: Add DU node to device tree
ARM: shmobile: r8a7790: Add DU node to device tree
ARM: shmobile: r8a7779: Add DU node to device tree
ARM: shmobile: Remove FSF address from copyright headers
Gavin Shan [Mon, 24 Nov 2014 22:26:58 +0000 (09:26 +1100)]
powerpc/eeh: Fix PE state format
Obviously I had wrong format given to the PE state output from
/sys/bus/pci/devices/xxxx/eeh_pe_state with some typoes, which
was introduced by commit 2013add4ce73. The patch fixes it up.
Fixes: 2013add4ce73 ("powerpc/eeh: Show hex prefix for PE state sysfs") Signed-off-by: Gavin Shan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
projects / linux.git / log