We don't currently check a number of registers exposed to AArch32 guests
(MVFR{0,1,2}_EL1 and ID_DFR0_EL1), despite the fact these describe
AArch32 feature support exposed to userspace and KVM guests similarly to
AArch64 registers which we do check. We do not expect these registers to
vary across a set of CPUs.
This patch adds said registers to the cpuinfo framework and sanity
checks. No sanity check failures have been observed on a current ARMv8
big.LITTLE platform (Juno).
Tobias Klauser [Mon, 5 Jan 2015 14:23:48 +0000 (14:23 +0000)]
arm64: Remove unused prepare_to_copy()
prepare_to_copy() was removed from all architectures supported at that
time in commit 55ccf3fe3f9a ("fork: move the real prepare_to_copy()
users to arch_dup_task_struct()"). Remove it from arm64 as well.
Mark Rutland [Mon, 5 Jan 2015 12:24:47 +0000 (12:24 +0000)]
arm64: Correct __NR_compat_syscalls for bpf
Commit 97b56be10352a70c (arm64: compat: Enable bpf syscall) made the
usual mistake of forgetting to update __NR_compat_syscalls. Due to this,
when el0_sync_compat calls el0_svc_naked, the test against sc_nr
(__NR_compat_syscalls) will fail, and we'll call ni_sys, returning
-ENOSYS to userspace.
This patch bumps __NR_compat_syscalls appropriately, enabling the use of
the bpf syscall from compat tasks.
Due to the reorganisation of unistd{,32}.h as part of commit f3e5c847ec3d12b4 (arm64: Add __NR_* definitions for compat syscalls) it
is not currently possible to include both headers and sanity-check the
value of __NR_compat_syscalls at build-time to prevent this from
happening again. Additional rework is required to make such niceties a
possibility.
Patrice CHOTARD [Mon, 5 Jan 2015 10:04:14 +0000 (11:04 +0100)]
pinctrl: st: Add irq_disable hook to st_gpio_irqchip
Currently disable_irq() doesn't work for pinctrl-st driver, due to
missing irq_disable hook in the driver.
disable_irq() is required only for level-triggered interrupts, which
is not the case normally.
Axel Lin [Wed, 17 Dec 2014 09:47:14 +0000 (17:47 +0800)]
gpio: dln2: Fix gpio output value in dln2_gpio_direction_output()
dln2_gpio_direction_output() ignored the state passed into it. Fix it.
Also make dln2_gpio_pin_set_out_val return int, so we can check the error value.
Octavian Purdila [Tue, 16 Dec 2014 15:57:12 +0000 (17:57 +0200)]
gpio: dln2: fix issue when an IRQ is unmasked then enabled
As noticed during suspend/resume operations, the IRQ can be unmasked
then disabled in suspend and eventually enabled in resume, but without
being unmasked.
The current implementation does not take into account interactions
between mask/unmask and enable/disable interrupts, and thus in the
above scenarios the IRQs remain unactive.
To fix this we removed the enable/disable operations as they fallback
to mask/unmask anyway.
We also remove the pending bitmaks as it is already done in irq_data
(i.e. IRQS_PENDING).
USB: qcserial/option: make AT URCs work for Sierra Wireless MC73xx
As has been discussed in the thread starting with
https://lkml.kernel.org/g/549748e9[email protected]
Sierra Wireless MC73xx devices with USB VID/PID 0x1199:0x68c0 require the
option_send_setup() code to be used on the USB interface for the AT port
to make unsolicited response codes work correctly. Move these devices from
the qcserial driver where they have been added by commit 70a3615fc07c2330ed7c1e922f3c44f4a67c0762 ("usb: qcserial: add Sierra Wireless
MC73xx") to the option driver and add a MC73xx-specific blacklist
to ensure that
1. the sendsetup code is not used for the DIAG/DM and NMEA interfaces
2. the option driver does not attach to the QMI/network interfaces
For C language, it treats array parameter as a pointer, so sizeof for an
array parameter is equal to sizeof for a pointer, which causes compiler
warning (with allmodconfig by gcc 5):
./arch/s390/include/asm/timex.h: In function 'get_tod_clock_ext':
./arch/s390/include/asm/timex.h:76:32: warning: 'sizeof' on array function parameter 'clk' will return size of 'char *' [-Wsizeof-array-argument]
typedef struct { char _[sizeof(clk)]; } addrtype;
^
Can use macro CLOCK_STORE_SIZE instead of all related hard code numbers,
which also can avoid this warning. And also add a tab to CLOCK_TICK_RATE
definition to match coding styles.
[[email protected]]:
Chen's patch actually fixes a bug within the get_tod_clock_ext() inline assembly
where we incorrectly tell the compiler that only 8 bytes of memory get changed
instead of 16 bytes.
This would allow gcc to generate incorrect code. Right now this doesn't seem to
be the case.
Also slightly changed the patch a bit.
- renamed CLOCK_STORE_SIZE to STORE_CLOCK_EXT_SIZE
- changed get_tod_clock_ext() to receive a char pointer parameter
Pull networking fixes from David Miller:
"Just a pile of random fixes, including:
1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu.
2) MDI{,X} eeprom check in e100 driver is reversed, from John W.
Linville.
3) Missing error return assignments in several ethernet drivers, from
Julia Lawall.
4) Altera TSE device doesn't come back up after ifconfig down/up
sequence, fix from Kostya Belezko.
5) Add more cases to the check for whether the qmi_wwan device has a
bogus MAC address and needs to be assigned a random one. From
Kristian Evensen.
6) Fix interrupt hangs in CPSW, from Felipe Balbi.
7) Implement ndo_features_check in r8152 so that the stack doesn't
feed GSO packets which are outside of the chip's capabilities.
From Hayes Wang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
qla3xxx: don't allow never end busy loop
xen-netback: fixing the propagation of the transmit shaper timeout
r8152: support ndo_features_check
batman-adv: fix potential TT client + orig-node memory leak
batman-adv: fix multicast counter when purging originators
batman-adv: fix counter for multicast supporting nodes
batman-adv: fix lock class for decoding hash in network-coding.c
batman-adv: fix delayed foreign originator recognition
batman-adv: fix and simplify condition when bonding should be used
Revert "mac80211: Fix accounting of the tailroom-needed counter"
net: ethernet: cpsw: fix hangs with interrupts
enic: free all rq buffs when allocation fails
qmi_wwan: Set random MAC on devices with buggy fw
openvswitch: Consistently include VLAN header in flow and port stats.
tcp: Do not apply TSO segment limit to non-TSO packets
Altera TSE: Add missing phydev
net/mlx4_core: Fix error flow in mlx4_init_hca()
net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow
qlcnic: Fix return value in qlcnic_probe()
net: axienet: fix error return code
...
Anjali Singhai [Fri, 19 Dec 2014 02:58:16 +0000 (02:58 +0000)]
i40e: Fix bug with TCP over IPv6 over VXLAN
The driver was examining the outer protocol layer to set the inner protocol
layer checksum offload. In the case of TCP over IPV6 over an IPv4 based
VXLAN the inner checksum offloads would be set to look for IPv4/UDP instead
of IPv6/TCP. This code fixes that so that the driver will look at the
proper layer for encapsulation offload settings.
Anjali Singhai [Fri, 19 Dec 2014 02:58:11 +0000 (02:58 +0000)]
i40e: Fix Rx checksum error counter
The Rx port checksum error counter was incrementing incorrectly with
UDP encapsulated tunneled traffic. This patch fixes the problem so that
the port_rx_csum counter will show accurate statistics.
When the driver was polling with interrupts disabled the hardware
will occasionally not write back descriptors. This patch causes
the driver to detect this situation and force an interrupt to
fire which will flush the stuck descriptor. Does not conflict
with napi because if we are already polling the napi_schedule is
ignored. Additionally the extra interrupts are rate limited, so
don't cause a burden to the CPU.
Merge branches 'acpi-pm', 'acpi-processor' and 'acpi-video'
* acpi-pm:
ACPI / PM: Fix PM initialization for devices that are not present
* acpi-processor:
ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
ACPI / processor: Convert apic_id to phys_id to make it arch agnostic
Linus Torvalds [Tue, 6 Jan 2015 22:05:40 +0000 (14:05 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Revert a potential seek_data/hole regression which shows up when using
ext4 to handle ext3 file systems, plus two minor bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove spurious KERN_INFO from ext4_warning call
Revert "ext4: fix suboptimal seek_{data,hole} extents traversial"
ext4: prevent online resize with backup superblock
Documentation/target: Update fabric_ops to latest code
This patch updates tcm_mod_builder.py to add/drop a handful of
struct target_core_fabric_ops functions to sync up with the
latest requirements to function in target_fabric_tf_ops_check().
While looking at hch's recent conversion to drop the MSG_*_TAG
definitions, I noticed a long standing bug in vhost-scsi where
the VIRTIO_SCSI_S_* attribute definitions where incorrectly
being passed directly into target_submit_cmd_map_sgls().
This patch adds the missing virtio-scsi to TCM/SAM task attribute
conversion.
netfilter: nfnetlink: relax strict multicast group check from netlink_bind
Relax the checking that was introduced in 97840cb ("netfilter:
nfnetlink: fix insufficient validation in nfnetlink_bind") when the
subscription bitmask is used. Existing userspace code code may request
to listen to all of the existing netlink groups by setting an all to one
subscription group bitmask. Netlink already validates subscription via
setsockopt() for us.
netfilter: nfnetlink: validate nfnetlink header from batch
Make sure there is enough room for the nfnetlink header in the
netlink messages that are part of the batch. There is a similar
check in netlink_rcv_skb().
netfilter: conntrack: fix race between confirmation and flush
Commit 5195c14c8b27c ("netfilter: conntrack: fix race in
__nf_conntrack_confirm against get_next_corpse") aimed to resolve the
race condition between the confirmation (packet path) and the flush
command (from control plane). However, it introduced a crash when
several packets race to add a new conntrack, which seems easier to
reproduce when nf_queue is in place.
Fix this race, in __nf_conntrack_confirm(), by removing the CT
from unconfirmed list before checking the DYING bit. In case
race occured, re-add the CT to the dying list
This patch also changes the verdict from NF_ACCEPT to NF_DROP when
we lose race. Basically, the confirmation happens for the first packet
that we see in a flow. If you just invoked conntrack -F once (which
should be the common case), then this is likely to be the first packet
of the flow (unless you already called flush anytime soon in the past).
This should be hard to trigger, but better drop this packet, otherwise
we leave things in inconsistent state since the destination will likely
reply to this packet, but it will find no conntrack, unless the origin
retransmits.
The change of the verdict has been discussed in:
https://www.marc.info/?l=linux-netdev&m=141588039530056&w=2
Linus Torvalds [Tue, 6 Jan 2015 21:00:05 +0000 (13:00 -0800)]
mm: propagate error from stack expansion even for guard page
Jay Foad reports that the address sanitizer test (asan) sometimes gets
confused by a stack pointer that ends up being outside the stack vma
that is reported by /proc/maps.
This happens due to an interaction between RLIMIT_STACK and the guard
page: when we do the guard page check, we ignore the potential error
from the stack expansion, which effectively results in a missing guard
page, since the expected stack expansion won't have been done.
And since /proc/maps explicitly ignores the guard page (commit d7824370e263: "mm: fix up some user-visible effects of the stack guard
page"), the stack pointer ends up being outside the reported stack area.
This is the minimal patch: it just propagates the error. It also
effectively makes the guard page part of the stack limit, which in turn
measn that the actual real stack is one page less than the stack limit.
Let's see if anybody notices. We could teach acct_stack_growth() to
allow an extra page for a grow-up/grow-down stack in the rlimit test,
but I don't want to add more complexity if it isn't needed.
dann frazier [Tue, 6 Jan 2015 02:54:40 +0000 (19:54 -0700)]
tools: testing: selftests: mq_perf_tests: Fix infinite loop on ARM
We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.
David Drysdale [Tue, 6 Jan 2015 08:23:56 +0000 (08:23 +0000)]
selftests/exec: allow shell return code of 126
When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found. However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.
David S. Miller [Tue, 6 Jan 2015 19:24:49 +0000 (14:24 -0500)]
Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge
Included changes:
- ensure bonding is used (if enabled) for packets coming in the soft
interface
- fix race condition to avoid orig_nodes to be deleted right after
being added
- avoid false positive lockdep splats by assigning lockclass to
the proper hashtable lock objects
- avoid miscounting of multicast 'disabled' nodes in the network
- fix memory leak in the Global Translation Table in case of
originator interval change
Palik, Imre [Tue, 6 Jan 2015 15:44:44 +0000 (16:44 +0100)]
xen-netback: fixing the propagation of the transmit shaper timeout
Since e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct"),
the transimt shaper timeout is always set to 0. The value the user sets via
xenbus is never propagated to the transmit shaper.
Commit 39d99cff76bf ("thermal: cpu_cooling: introduce
of_cpufreq_cooling_register") taught the cpu cooling device to register
devices that were linked to the device tree but didn't update the
cpu-cooling-api documentation. Fix it.
David S. Miller [Tue, 6 Jan 2015 18:29:27 +0000 (13:29 -0500)]
Merge tag 'mac80211-for-davem-2015-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Here's just a single fix - a revert of a patch that broke the
p54 and cw2100 drivers (arguably due to bad assumptions there.)
Since this affects kernels since 3.17, I decided to revert for
now and we'll revisit this optimisation properly for -next.
hayeswang [Tue, 6 Jan 2015 09:41:58 +0000 (17:41 +0800)]
r8152: support ndo_features_check
Support ndo_features_check to avoid:
- the transport offset is more than the hw limitation when using hw checksum.
- the skb->len of a GSO packet is more than the limitation.
Oded Gabbay [Mon, 29 Dec 2014 11:52:22 +0000 (13:52 +0200)]
drm/amdkfd: Do copy_to/from_user in general kfd_ioctl()
This patch moves the copy_to_user() and copy_from_user() calls from the
different ioctl functions in amdkfd to the general kfd_ioctl() function, as
this is a common code for all ioctls.
This was done according to example taken from drm_ioctl.c
Tony Lindgren [Tue, 6 Jan 2015 16:49:57 +0000 (08:49 -0800)]
ARM: dts: Revert disabling of smc91x for n900
Revert "ARM: dts: Disable smc91x on n900 until bootloader
dependency is removed". We've now fixed the issues that
caused problems with uninitialized hardware depending on
the bootloader version. Mostly things got fixed with
the following commits:
9a894953a97b ("ARM: dts: Fix bootloader version dependencies by muxing n900 smc91x pins") 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting")
Note that this only affects the early development boards
with Ethernet that we still have in a few automated boot
test systems. And it's also available supposedly in some
versions of qemu.
The reason we defer kfree until release function is because it's a
general rule for kobjects: kfree of the reference counter itself is only
legal in the release function.
Previous patch didn't make this clear, document this in code.
Sasha Levin [Fri, 2 Jan 2015 19:47:40 +0000 (14:47 -0500)]
virtio_pci: defer kfree until release callback
A struct device which has just been unregistered can live on past the
point at which a driver decides to drop it's initial reference to the
kobject gained on allocation.
This implies that when releasing a virtio device, we can't free a struct
virtio_device until the underlying struct device has been released,
which might not happen immediately on device_unregister().
Unfortunately, this is exactly what virtio pci does:
it has an empty release callback, and frees memory immediately
after unregistering the device.
This causes an easy to reproduce crash if CONFIG_DEBUG_KOBJECT_RELEASE
it enabled.
To fix, free the memory only once we know the device is gone in the release
callback.
Anson Huang [Tue, 6 Jan 2015 10:50:22 +0000 (18:50 +0800)]
Thermal: imx: add clk disable/enable for suspend/resume
Thermal sensor's clk is from pll3_usb_otg, per hardware
design requirement, need to make sure pll3_usb_otg is disabled
before STOP mode is entered, otherwise, all PFDs under it may
enter incorrect state, this patch disables pll3_usb_otg before
suspend and enables it after resume.
GPIO2_5 is the reset GPIO for the USB3317 ULPI PHY. Instead of modelling it as
a regulator, the correct approach is to use the 'reset_gpios' property of the
"usb-nop-xceiv" node.
GPIO1_7 is the reset GPIO for the USB2517 USB hub. As we currently don't have
dt bindings to describe a HUB reset, let's keep using the regulator approach.
Rename the regulator to 'reg_hub_reset' to better describe its function and bind
it with the USB host1 port instead.
USB host support has been introduced by commit 9bf206a9d13be3 ("ARM: dts:
imx51-babbage: Add USB Host1 support"), which landed in 3.16 and it seems that
USB has only been functional due to previous bootloader initialization.
With this patch applied we can get USB host to work without relying on the
bootloader.
This patch fixes a potential memory leak which can occur once an
originator times out. On timeout the according global translation table
entry might not get purged correctly. Furthermore, the non purged TT
entry will cause its orig-node to leak, too. Which additionally can lead
to the new multicast optimization feature not kicking in because of a
therefore bogus counter.
In detail: The batadv_tt_global_entry->orig_list holds the reference to
the orig-node. Usually this reference is released after
BATADV_PURGE_TIMEOUT through: _batadv_purge_orig()->
batadv_purge_orig_node()->batadv_update_route()->_batadv_update_route()->
batadv_tt_global_del_orig() which purges this global tt entry and
releases the reference to the orig-node.
However, if between two batadv_purge_orig_node() calls the orig-node
timeout grew to 2*BATADV_PURGE_TIMEOUT then this call path isn't
reached. Instead the according orig-node is removed from the
originator hash in _batadv_purge_orig(), the batadv_update_route()
part is skipped and won't be reached anymore.
Fixing the issue by moving batadv_tt_global_del_orig() out of the rcu
callback.
Linus Lüssing [Thu, 30 Oct 2014 04:40:47 +0000 (05:40 +0100)]
batman-adv: fix multicast counter when purging originators
When purging an orig_node we should only decrease counter tracking the
number of nodes without multicast optimizations support if it was
increased through this orig_node before.
A not yet quite initialized orig_node (meaning it did not have its turn
in the mcast-tvlv handler so far) which gets purged would not adhere to
this and will lead to a counter imbalance.
Fixing this by adding a check whether the orig_node is mcast-initalized
before decreasing the counter in the mcast-orig_node-purging routine.
Linus Lüssing [Thu, 30 Oct 2014 04:40:46 +0000 (05:40 +0100)]
batman-adv: fix counter for multicast supporting nodes
A miscounting of nodes having multicast optimizations enabled can lead
to multicast packet loss in the following scenario:
If the first OGM a node receives from another one has no multicast
optimizations support (no multicast tvlv) then we are missing to
increase the counter. This potentially leads to the wrong assumption
that we could safely use multicast optimizations.
Fixings this by increasing the counter if the initial OGM has the
multicast TVLV unset, too.
Martin Hundebøll [Tue, 11 Nov 2014 15:22:23 +0000 (16:22 +0100)]
batman-adv: fix lock class for decoding hash in network-coding.c
batadv_has_set_lock_class() is called with the wrong hash table as first
argument (probably due to a copy-paste error), which leads to false
positives when running with lockdep.
Introduced-by: 612d2b4fe0a1ff2f8389462a6f8be34e54124c05
("batman-adv: network coding - save overheard and tx packets for decoding")
Currently it can happen that the reception of an OGM from a new
originator is not being accepted. More precisely it can happen that
an originator struct gets allocated and initialized
(batadv_orig_node_new()), even the TQ gets calculated and set correctly
(batadv_iv_ogm_calc_tq()) but still the periodic orig_node purging
thread will decide to delete it if it has a chance to jump between
these two function calls.
This is because batadv_orig_node_new() initializes the last_seen value
to zero and its caller (batadv_iv_ogm_orig_get()) makes it visible to
other threads by adding it to the hash table already.
batadv_iv_ogm_calc_tq() will set the last_seen variable to the correct,
current time a few lines later but if the purging thread jumps in between
that it will think that the orig_node timed out and will wrongly
schedule it for deletion already.
If the purging interval is the same as the originator interval (which is
the default: 1 second), then this game can continue for several rounds
until the random OGM jitter added enough difference between these
two (in tests, two to about four rounds seemed common).
Fixing this by initializing the last_seen variable of an orig_node
to the current time before adding it to the hash table.
Simon Wunderlich [Wed, 13 Aug 2014 12:26:56 +0000 (14:26 +0200)]
batman-adv: fix and simplify condition when bonding should be used
The current condition actually does NOT consider bonding when the
interface the packet came in from is the soft interface, which is the
opposite of what it should do (and the comment describes). Fix that and
slightly simplify the condition.
Miklos Szeredi [Tue, 6 Jan 2015 09:45:35 +0000 (10:45 +0100)]
fuse: fix LOOKUP vs INIT compat handling
Analysis from Marc:
"Commit 7078187a795f ("fuse: introduce fuse_simple_request() helper")
from the above pull request triggers some EIO errors for me in some tests
that rely on fuse
Looking at the code changes and a bit of debugging info I think there's a
general problem here that fuse_get_req checks and possibly waits for
fc->initialized, and this was always called first. But this commit
changes the ordering and in many places fc->minor is now possibly used
before fuse_get_req, and we can't be sure that fc has been initialized.
In my case fuse_lookup_init sets req->out.args[0].size to the wrong size
because fc->minor at that point is still 0, leading to the EIO error."
Fix by moving the compat adjustments into fuse_simple_request() to after
fuse_get_req().
This is also more readable than the original, since now compatibility is
handled in a single function instead of cluttering each operation.
Trond Myklebust [Fri, 19 Dec 2014 17:47:50 +0000 (12:47 -0500)]
NFSv4: Remove incorrect check in can_open_delegated()
Remove an incorrect check for NFS_DELEGATION_NEED_RECLAIM in
can_open_delegated(). We are allowed to cache opens even in
a situation where we're doing reboot recovery.
Chuck Lever [Sat, 3 Jan 2015 19:45:33 +0000 (14:45 -0500)]
NFS: Ignore transport protocol when detecting server trunking
Detect server trunking across transport protocols. Otherwise, an
RDMA mount and a TCP mount of the same server will end up with
separate nfs_clients using the same clientid4.
Trond Myklebust [Sat, 3 Jan 2015 20:35:27 +0000 (15:35 -0500)]
NFSv4/v4.1: Verify the client owner id during trunking detection
While we normally expect the NFSv4 client to always send the same client
owner to all servers, there are a couple of situations where that is not
the case:
1) In NFSv4.0, switching between use of '-omigration' and not will cause
the kernel to switch between using the non-uniform and uniform client
strings.
2) In NFSv4.1, or NFSv4.0 when using uniform client strings, if the
uniquifier string is suddenly changed.
This patch will catch those situations by checking the client owner id
in the trunking detection code, and will do the right thing if it notices
that the strings differ.
Trond Myklebust [Fri, 2 Jan 2015 21:25:08 +0000 (16:25 -0500)]
NFSv4.1: Fix client id trunking on Linux
Currently, our trunking code will check for session trunking, but will
fail to detect client id trunking. This is a problem, because it means
that the client will fail to recognise that the two connections represent
shared state, even if they do not permit a shared session.
By removing the check for the server minor id, and only checking the
major id, we will end up doing the right thing in both cases: we close
down the new nfs_client and fall back to using the existing one.
Trond Myklebust [Fri, 2 Jan 2015 20:05:25 +0000 (15:05 -0500)]
LOCKD: Fix a race when initialising nlmsvc_timeout
This commit fixes a race whereby nlmclnt_init() first starts the lockd
daemon, and then calls nlm_bind_host() with the expectation that
nlmsvc_timeout has already been initialised. Unfortunately, there is no
no synchronisation between lockd() and lockd_up() to guarantee that this
is the case.
Fix is to move the initialisation of nlmsvc_timeout into lockd_create_svc
Zhang Rui [Sun, 4 Jan 2015 06:24:24 +0000 (14:24 +0800)]
ACPI/int340x_thermal: enumerate INT3401 for Intel SoC DTS thermal driver
Intel SoC DTS thermal driver on Baytrail platform uses IRQ 86 for
critical overheating notification.
But this IRQ 86 is described in the _CRS control method of INT3401 device,
thus we should enumerate INT3401 to set the IRQ descriptor when
Intel SoC DTS thermal driver is built.
Zhang Rui [Sun, 4 Jan 2015 06:24:23 +0000 (14:24 +0800)]
ACPI/int340x_thermal: enumerate INT340X devices even if they're not in _ART/_TRT
For some INT340X thermal devices, even if they are not referred in
_TRT/_ART table, they still can be used by userspace for thermal control.
Thus change the code to enumerated all the INT340X devices,
no matter if they're referred in _TRT/_ART or not.
Nishanth Menon [Mon, 5 Jan 2015 23:45:45 +0000 (15:45 -0800)]
ARM: omap2plus_defconfig: use CONFIG_CPUFREQ_DT
CONFIG_GENERIC_CPUFREQ_CPU0 disappeared with commit bbcf071969b20f
("cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'")
Use the renamed CONFIG_CPUFREQ_DT generic driver. It looks like with
v3.18-rc1, commit bbcf071969b20f and fdc509b15eb3eb came in via
different trees causing the resultant v3.18-rc1 to be non-functional for
cpufreq as default supported with omap2plus_defconfig.
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
If the boot loader enables HYP mode on the boot CPU, the secondary CPU
also needs to call into the ROM to switch to HYP mode before booting.
The firmwares on the omap5 and dra7xx unfortunately do not take care
of this, so it has to be handled by the kernel.
This patch is based on "[PATCH 2/2] ARM: OMAP5: Add HYP mode entry support
for secondary CPUs" by Santosh Shilimkar <[email protected]>,
except this version does not require a compile time CONFIG to control
if it should enable HYP mode or not, it simply does it based on the mode
of the boot CPU, so it works whether the CPU boots in SVC or HYP mode,
and should even work as a guest kernel inside kvm if qemu decides to
support emulating the omap5 or dra7xx.
ARM: dra7xx: Fix counter frequency drift for AM572x errata i856
Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external
crystal is not enabled at power up. Instead the CPU falls back to using
an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually
20MHz on boards so far (which gives an emulated frequency of 32.786KHz),
but can also be 19.2 or 27MHz which result in much larger drift.
Since this is used to drive the master counter at 32.768KHz * 375 /
2 = 6.144MHz, the emulated speed for 20MHz is of by 570ppm, or about 43
seconds per day, and more than the 500ppm NTP is able to tolerate.
Checking the CTRL_CORE_BOOTSTRAP register can determine if the CPU
is using the real 32.768KHz crystal or the emulated SYSCLK1/610, and
by known that the real counter frequency can be determined and used.
The real speed is then SYSCLK1 / 610 * 375 / 2 or SYSCLK1 * 75 / 244.
Linus Torvalds [Mon, 5 Jan 2015 22:49:02 +0000 (14:49 -0800)]
Merge tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc fixes from Michael Ellerman:
- Wire up sys_execveat(). Tested on 32 & 64 bit.
- Fix for kdump on LE systems with cpus hot unplugged.
- Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this
broke other platforms, we'll do a proper fix for 3.20.
* tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online"
powerpc/kdump: Ignore failure in enabling big endian exception during crash
powerpc: Wire up sys_execveat() syscall
Hanjun Guo [Sun, 4 Jan 2015 10:55:03 +0000 (18:55 +0800)]
ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
acpi_map_lsapic() will allocate a logical CPU number and map it to
physical CPU id (such as APIC id) for the hot-added CPU, it will also
do some mapping for NUMA node id and etc, acpi_unmap_lsapic() will
do the reverse.
We can see that the name of the function is a little bit confusing and
arch (IA64) dependent so rename them as acpi_(un)map_cpu() to make arch
agnostic and explicit.
Hanjun Guo [Sun, 4 Jan 2015 10:55:02 +0000 (18:55 +0800)]
ACPI / processor: Convert apic_id to phys_id to make it arch agnostic
apic_id in MADT table is the CPU hardware id which identify
it self in the system for x86 and ia64, OSPM will use it for
SMP init to map APIC ID to logical cpu number in the early
boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the
ACPI processor driver is probed and the driver will use acpi_id
in DSDT to get the apic_id, then map to the logical cpu number
which is needed by the processor driver.
Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec,
so apic_id is used both in arch code and ACPI core which is
pretty fine. Since ACPI 5.0, ARM is supported by ACPI and
APIC is not available on ARM, this will confuse people when
apic_id is both used by x86 and ARM in one function.
So convert apic_id to phys_id (which is the original meaning)
in ACPI processor dirver to make it arch agnostic, but leave the
arch dependent code unchanged, no functional change.
ACPI / PM: Fix PM initialization for devices that are not present
If an ACPI device object whose _STA returns 0 (not present and not
functional) has _PR0 or _PS0, its power_manageable flag will be set
and acpi_bus_init_power() will return 0 for it. Consequently, if
such a device object is passed to the ACPI device PM functions, they
will attempt to carry out the requested operation on the device,
although they should not do that for devices that are not present.
To fix that problem make acpi_bus_init_power() return an error code
for devices that are not present which will cause power_manageable to
be cleared for them as appropriate in acpi_bus_get_power_flags().
However, the lists of power resources should not be freed for the
device in that case, so modify acpi_bus_get_power_flags() to keep
those lists even if acpi_bus_init_power() returns an error.
Accordingly, when deciding whether or not the lists of power
resources need to be freed, acpi_free_power_resources_lists()
should check the power.flags.power_resources flag instead of
flags.power_manageable, so make that change too.
Furthermore, if acpi_bus_attach() sees that flags.initialized is
unset for the given device, it should reset the power management
settings of the device and re-initialize them from scratch instead
of relying on the previous settings (the device may have appeared
after being not present previously, for example), so make it use
the 'valid' flag of the D0 power state as the initial value of
flags.power_manageable for it and call acpi_bus_init_power() to
discover its current power state.
Bruno Prémont [Fri, 19 Dec 2014 09:29:16 +0000 (10:29 +0100)]
qla2xxx: fix busy wait regression
Commit e05fe29248 (qla2xxx: Honor FCP_RSP retry delay timer field.)
causes systems to busy-wait for about 3 minutes after boot prior to
detecting SAN disks.
During this wait period one kworker is running full-time
(though /proc/<pid>/stack has no useful data). Another kworker is
waiting for IO to complete during that whole time period.
Looking at drivers/scsi/qla2xxx/qla_os.c, fcport->retry_delay_timestamp
has a special value of 0 though that 0 value forces system to wait when
jiffies is very large value (e.g. 4294952605 - "negative" value when
signed on 32bit systems).
Alex Deucher [Wed, 10 Dec 2014 14:42:10 +0000 (09:42 -0500)]
drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw
The check was already in place in the dp mode_valid check, but
radeon_dp_get_dp_link_clock() never returned the high clock
mode_valid was checking for because that function clipped the
clock based on the hw capabilities. Add an explicit check
in the mode_valid function.
Sasha Levin [Mon, 29 Dec 2014 14:39:01 +0000 (09:39 -0500)]
KEYS: close race between key lookup and freeing
When a key is being garbage collected, it's key->user would get put before
the ->destroy() callback is called, where the key is removed from it's
respective tracking structures.
This leaves a key hanging in a semi-invalid state which leaves a window open
for a different task to try an access key->user. An example is
find_keyring_by_name() which would dereference key->user for a key that is
in the process of being garbage collected (where key->user was freed but
->destroy() wasn't called yet - so it's still present in the linked list).
This would cause either a panic, or corrupt memory.
Takashi Iwai [Mon, 5 Jan 2015 12:27:33 +0000 (13:27 +0100)]
ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs
stac_store_hints() does utterly wrong for masking the values for
gpio_dir and gpio_data, likely due to copy&paste errors. Fortunately,
this feature is used very rarely, so the impact must be really small.
Joerg Roedel [Tue, 9 Dec 2014 11:56:45 +0000 (12:56 +0100)]
iommu/vt-d: Fix dmar_domain leak in iommu_attach_device
Since commit 1196c2f a domain is only destroyed in the
notifier path if it is hot-unplugged. This caused a
domain leakage in iommu_attach_device when a driver was
unbound from the device and bound to VFIO. In this case the
device is attached to a new domain and unlinked from the old
domain. At this point nothing points to the old domain
anymore and its memory is leaked.
Fix this by explicitly freeing the old domain in
iommu_attach_domain.
Laurent Pinchart [Mon, 15 Dec 2014 18:41:13 +0000 (20:41 +0200)]
iommu/ipmmu-vmsa: Change IOMMU_EXEC to IOMMU_NOEXEC
Commit a720b41c41f5a7e4 ("iommu/arm-smmu: change IOMMU_EXEC to
IOMMU_NOEXEC") has inverted and replaced the IOMMU_EXEC flag with
IOMMU_NOEXEC. Update the driver accordingly.
Mathias Krause [Tue, 30 Dec 2014 21:50:54 +0000 (22:50 +0100)]
crypto: aesni - fix "by8" variant for 128 bit keys
The "by8" counter mode optimization is broken for 128 bit keys with
input data longer than 128 bytes. It uses the wrong key material for
en- and decryption.
The key registers xkey0, xkey4, xkey8 and xkey12 need to be preserved
in case we're handling more than 128 bytes of input data -- they won't
get reloaded after the initial load. They must therefore be (a) loaded
on the first iteration and (b) be preserved for the latter ones. The
implementation for 128 bit keys does not comply with (a) nor (b).
Fix this by bringing the implementation back to its original source
and correctly load the key registers and preserve their values by
*not* re-using the registers for other purposes.
Kudos to James for reporting the issue and providing a test case
showing the discrepancies.
Kalle Valo [Mon, 5 Jan 2015 10:07:04 +0000 (12:07 +0200)]
Merge tag 'iwlwifi-for-kalle-2015-01-05' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
* fix for 7265D NVM check
* fixes for scan: fix long scanning times and network
discovery
* new firmware API for iwlmvm supported devices
* fixes in rate control
It turns out that the p54 and cw2100 drivers assume that there's
tailroom even when they don't say they really need it. However,
there's currently no way for them to explicitly say they do need
it, so for now revert this.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=90331.
projects / linux.git / log