Meng Li [Fri, 19 Jan 2024 09:04:56 +0000 (17:04 +0800)]
x86: Drop CPU_SUP_INTEL from SCHED_MC_PRIO for the expansion
amd-pstate driver also uses SCHED_MC_PRIO, so decouple the requirement
of CPU_SUP_INTEL from the dependencies to allow compilation in kernels
without Intel CPU support.
Linus Torvalds [Sun, 28 Jan 2024 21:55:56 +0000 (13:55 -0800)]
Merge tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
Linus Torvalds [Sun, 28 Jan 2024 18:43:06 +0000 (10:43 -0800)]
Merge tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix boot issue on single core Lantiq Danube devices
- fix boot issue on Loongson64 platforms
- fix improper FPU setup
- fix missing prototypes issues
* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
MIPS: loongson64: set nid for reserved memblock region
Revert "MIPS: loongson64: set nid for reserved memblock region"
MIPS: lantiq: register smp_ops on non-smp platforms
MIPS: loongson64: set nid for reserved memblock region
MIPS: reserve exception vector space ONLY ONCE
MIPS: BCM63XX: Fix missing prototypes
MIPS: sgi-ip32: Fix missing prototypes
MIPS: sgi-ip30: Fix missing prototypes
MIPS: fw arc: Fix missing prototypes
MIPS: sgi-ip27: Fix missing prototypes
MIPS: Alchemy: Fix missing prototypes
MIPS: Cobalt: Fix missing prototypes
Linus Torvalds [Sun, 28 Jan 2024 18:34:55 +0000 (10:34 -0800)]
Merge tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Initialize the resend node of each IRQ descriptor, not only the first
one
* tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Initialize resend_node hlist for all interrupt descriptors
Linus Torvalds [Sun, 28 Jan 2024 18:33:14 +0000 (10:33 -0800)]
Merge tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Preserve the number of idle calls and sleep entries across CPU
hotplug events in order to be able to compute correct averages
- Limit the duration of the clocksource watchdog checking interval as
too long intervals lead to wrongly marking the TSC as unstable
* tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Preserve number of idle sleeps across CPU hotplug events
clocksource: Skip watchdog check for large watchdog intervals
Linus Torvalds [Sun, 28 Jan 2024 17:45:11 +0000 (09:45 -0800)]
Merge tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure 32-bit syscall registers are properly sign-extended
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
* tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5
x86/entry/ia32: Ensure s32 is sign extended to s64
x86/cpu: Add model number for Intel Clearwater Forest processor
x86/CPU/AMD: Add X86_FEATURE_ZEN5
x86/paravirt: Make BUG_func() usable by non-GPL modules
Linus Torvalds [Sun, 28 Jan 2024 17:41:39 +0000 (09:41 -0800)]
Merge tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix crash when reserved memory is not added to memory.
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
of reserved pages may cause access of NODE_DATA() with invalid nid and
crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
to ensure a valid node id is always passed to init_reserved_page()"
* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix crash when reserved memory is not added to memory
Linus Torvalds [Sat, 27 Jan 2024 17:48:55 +0000 (09:48 -0800)]
Merge tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- WMI bus driver fixes
- Second attempt (previously reverted) at P2SB PCI rescan deadlock fix
- AMD PMF driver improvements
- MAINTAINERS updates
- Misc other small fixes and hw-id additions
* tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
platform/x86/intel/ifs: Call release_firmware() when handling errors.
platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()
platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events
platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section
MAINTAINERS: add Luke Jones as maintainer for asus notebooks
MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr
platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message
platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
platform/x86: intel-uncore-freq: Fix types in sysfs callbacks
platform/x86: wmi: Fix wmi_dev_probe()
platform/x86: wmi: Fix notify callback locking
platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list
platform/x86: wmi: Return immediately if an suitable WMI event is found
platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
Linus Torvalds [Sat, 27 Jan 2024 17:44:40 +0000 (09:44 -0800)]
Merge tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix boot failure on machines with more than 8 nodes, and fix two build
errors about KVM"
* tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add returns to SIMD stubs
LoongArch: KVM: Fix build due to API changes
LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
Linus Torvalds [Sat, 27 Jan 2024 17:11:52 +0000 (09:11 -0800)]
Merge tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- fix for REQ_OP_FLUSH usage; this fixes filesystems going read only
with -EOPNOTSUPP from the block layer.
(this really should have gone in with the block layer patch causing
the -EOPNOTSUPP, or should have gone in before).
- fix an allocation in non-sleepable context
- fix one source of srcu lock latency, on devices with terrible discard
latency
- fix a reattach_inode() issue in fsck
* tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs:
bcachefs: __lookup_dirent() works in snapshot, not subvol
bcachefs: discard path uses unlock_long()
bcachefs: fix incorrect usage of REQ_OP_FLUSH
bcachefs: Add gfp flags param to bch2_prt_task_backtrace()
Linus Torvalds [Sat, 27 Jan 2024 17:02:42 +0000 (09:02 -0800)]
Merge tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Nine cifs/smb client fixes
- Four network error fixes (three relating to replays of requests
that need to be retried, and one fixing some places where we were
returning the wrong rc up the stack on network errors)
- Two multichannel fixes including locking fix and case where subset
of channels need reconnect
- netfs integration fixup: share remote i_size with netfslib
- Two small cleanups (one for addressing a clang warning)"
* tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix stray unlock in cifs_chan_skip_or_disable
cifs: set replay flag for retries of write command
cifs: commands that are retried should have replay flag set
cifs: helper function to check replayable error codes
cifs: translate network errors on send to -ECONNABORTED
cifs: cifs_pick_channel should try selecting active channels
cifs: Share server EOF pos with netfslib
smb: Work around Clang __bdos() type confusion
smb: client: delete "true", "false" defines
Xi Ruoyao [Fri, 26 Jan 2024 21:05:57 +0000 (05:05 +0800)]
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting. This can cause an improper floating-point
environment after execve(). For example:
zsh% cat measure.c
#include <fenv.h>
int main() { return fetestexcept(FE_INEXACT); }
zsh% cc measure.c -o measure -lm
zsh% echo $((1.0/3)) # raising FE_INEXACT
0.33333333333333331
zsh% while ./measure; do ; done
(stopped in seconds)
Call lose_fpu(0) before setting fcr31 to prevent this.
Huang Pei [Sat, 27 Jan 2024 09:12:21 +0000 (17:12 +0800)]
MIPS: loongson64: set nid for reserved memblock region
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals
that reserved memblock regions have no valid node id set, just set it
right since loongson64 firmware makes it clear in memory layout info.
This works around booting failure on 3A1000+ since commit 61167ad5fecd
("mm: pass nid to reserve_bootmem_region()") under
CONFIG_DEFERRED_STRUCT_PAGE_INIT.
Linus Torvalds [Fri, 26 Jan 2024 23:24:00 +0000 (15:24 -0800)]
Merge tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Fix an incorrect link_power_management_policy sysfs attribute value.
We were previously using the same attribute value for two different
LPM policies (me)
- Add a ASMedia ASM1166 quirk.
The SATA host controller always reports that it has 32 ports, even
though it only has six ports. Add a quirk that overrides the value
reported by the controller (Conrad)
- Add a ASMedia ASM1061 quirk.
The SATA host controller completely ignores the upper 21 bits of the
DMA address. This causes IOMMU error events when a (valid) DMA
address actually has any of the upper 21 bits set. Add a quirk that
limits the dma_mask to 43-bits (Lennert)
* tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
ahci: asm1166: correct count of reported ports
ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWN
Linus Torvalds [Fri, 26 Jan 2024 23:19:43 +0000 (15:19 -0800)]
Merge tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- RCU warning fix for md (Mikulas)
- Fix for an aoe issue that lockdep rightfully complained about
(Maksim)
- Fix for an error code change in partitioning that caused a regression
with some tools (Li)
- Fix for a data direction warning with bi-direction commands
(Christian)
* tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linux:
md: fix a suspicious RCU usage warning
aoe: avoid potential deadlock at set_capacity
block: Fix WARNING in _copy_from_iter
block: Move checking GENHD_FL_NO_PART to bdev_add_partition()
Linus Torvalds [Fri, 26 Jan 2024 23:17:42 +0000 (15:17 -0800)]
Merge tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a single tweak to the newly added IORING_OP_FIXED_FD_INSTALL from
Paul, ensuring it goes via the audit path and playing it safe by
excluding it from using registered creds"
* tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linux:
io_uring: enable audit and restrict cred override for IORING_OP_FIXED_FD_INSTALL
Linus Torvalds [Fri, 26 Jan 2024 23:06:23 +0000 (15:06 -0800)]
Merge tag 'thermal-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control update from Rafael Wysocki:
"Remove some dead code from the Intel powerclamp thermal control driver
(Srinivas Pandruvada)"
* tag 'thermal-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: powerclamp: Remove dead code for target mwait value
Linus Torvalds [Fri, 26 Jan 2024 22:53:28 +0000 (14:53 -0800)]
Merge tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq drivers and the cpupower utility.
Specifics:
- Fix the handling of scaling_max/min_freq sysfs attributes in the
AMD P-state cpufreq driver (Mario Limonciello)
- Make the intel_pstate cpufreq driver avoid unnecessary computation
of the HWP performance level corresponding to a given frequency in
the cases when it is known already, which also helps to avoid
reducing the maximum CPU capacity artificially on some systems
(Rafael J. Wysocki)
- Fix compilation of the cpupower utility when CFLAGS is passed as a
make argument for cpupower, but it does not take effect as expected
due to mishandling (Stanley Chan)"
* tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Fix setting scaling max/min freq values
cpufreq: intel_pstate: Refine computation of P-state for given frequency
tools cpupower bench: Override CFLAGS assignments
Linus Torvalds [Fri, 26 Jan 2024 22:51:41 +0000 (14:51 -0800)]
Merge tag 'docs-6.8-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of relatively boring documentation fixes"
* tag 'docs-6.8-fixes' of git://git.lwn.net/linux:
docs: admin-guide: remove obsolete advice related to SLAB allocator
doc: admin-guide/kernel-parameters: remove useless comment
docs/accel: correct links to mailing list archives
docs/sphinx: Fix TOC scroll hack for the home page
Linus Torvalds [Fri, 26 Jan 2024 21:52:18 +0000 (13:52 -0800)]
Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Lots going on for rc2, ivpu has a bunch of stabilisation and debugging
work, then amdgpu and xe are the main fixes. i915, exynos have a few,
then some misc panel and bridge fixes.
Worth mentioning are three regressions. One of the nouveau fixes in
6.7 for a serious deadlock had side effects, so I guess we will bring
back the deadlock until I can figure out what should be done properly.
There was a scheduler regression vs amdgpu which was reported in a few
places and is now fixed. There was an i915 vs simpledrm problem
resulting in black screens, that is reverted also.
I'll be working on a proper nouveau fix, it kinda looks like one of
those cases where someone tried to use an atomic where they should
have probably used a lock, but I'll see.
fb:
- fix simpledrm/i915 regression by reverting change
scheduler:
- fix regression affecting amdgpu users due to sched draining
nouveau:
- revert 6.7 deadlock fix as it has side effects
dp:
- fix documentation warning
ttm:
- fix dummy page read on some platforms
bridge:
- anx7625 suspend fix
- sii902x: fix probing and audio registration
- parade-ps8640: fix suspend of bridge, aux fixes
- samsung-dsim: avoid using FORCE_STOP_STATE
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
i915:
- DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
- Drop -Wstringop-overflow (broken on GCC11)
ivpu:
- fix recovery/reset support
- improve submit ioctl stability
- fix dev open/close races on unbind
- PLL disable reset fix
- deprecate context priority param
- improve debug buffer logging
- disable buffer sharing across VPU contexts
- free buffer sgt on unbind
- fix missing lock around shmem vmap
- add better boot diagnostics
- add more debug prints around mapping
- dump MMU events in case of timeout
xe:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests"
* tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits)
Revert "nouveau: push event block/allowing out of the fence context"
drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
drm/sched: Drain all entities in DRM sched run job worker
drm/amd/display: "Enable IPS by default"
drm/amd: Add a DC debug mask for IPS
drm/amd/display: Disable ips before dc interrupt setting
drm/amd/display: Replay + IPS + ABM in Full Screen VPB
drm/amd/display: Add IPS checks before dcn register access
drm/amd/display: Add Replay IPS register for DMUB command table
drm/amd/display: Allow IPS2 during Replay
drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs
drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs
drm/amd/amdgpu: Assign GART pages to AMD device mapping
drm/amd/pm: Fetch current power limit from FW
drm/amdgpu: Fix null pointer dereference
drm/amdgpu: Show vram vendor only if available
drm/amd/pm: update the power cap setting
drm/amdgpu: Avoid fetching vram vendor information
drm/amdgpu/pm: Fix the power source flag error
drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions
...
Linus Torvalds [Fri, 26 Jan 2024 21:22:59 +0000 (13:22 -0800)]
Merge tag 'asm-generic-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic update from Arnd Bergmann:
"Just one patch this time, adding Andreas Larsson as co-maintainer for
arch/sparc. He is volunteering to help since David Miller has become
much less active over the past few years.
In turn, I'm helping Andreas get set up as a new maintainer, starting
with the entry in the MAINTAINERS file"
* tag 'asm-generic-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
MAINTAINERS: Add Andreas Larsson as co-maintainer for arch/sparc
Linus Torvalds [Fri, 26 Jan 2024 21:09:38 +0000 (13:09 -0800)]
Merge tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC fixes from Arnd Bergmann:
"There are a couple of devicetree fixes for samsung, riscv/sophgo, and
for TPM device nodes on a couple of platforms.
Both the Arm FF-A and the SCMI firmware drivers get a number of code
fixes, addressing minor implementation bugs and compatibility with
firmware implementations. Most of these bugs relate to the usage of
xarray and rwlock structures and are fixed by Cristian Marussi"
* tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format
arm64: dts: Fix TPM schema violations
ARM: dts: Fix TPM schema violations
ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
firmware: arm_ffa: Handle partitions setup failures
firmware: arm_ffa: Use xa_insert() and check for result
firmware: arm_ffa: Simplify ffa_partitions_cleanup()
firmware: arm_ffa: Check xa_load() return value
firmware: arm_ffa: Add missing rwlock_init() for the driver partition
firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()
firmware: arm_scmi: Fix the clock protocol supported version
firmware: arm_scmi: Fix the clock protocol version for v3.2
firmware: arm_scmi: Use xa_insert() when saving raw queues
firmware: arm_scmi: Use xa_insert() to store opps
firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.h
firmware: arm_scmi: Check mailbox/SMT channel for consistency
Linus Torvalds [Fri, 26 Jan 2024 20:29:04 +0000 (12:29 -0800)]
Merge tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"As well as a few device IDs and the usual scattering of driver
specific fixes this contains a couple of core things.
One is a missed case in error handling, the other patch is a change
from me raising the number of chip selects allowed by the newly added
multi chip select support patches to resolve problems seen on several
systems that exceeded the limit.
This is not a real solution to the issue but rather just a change to
avoid disruption to users, one of the options I am considering is just
sending a revert of those changes if we can't come up with something
sensible"
* tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix finalize message on error return
spi: cs42l43: Handle error from devm_pm_runtime_enable
spi: Raise limit on number of chip selects
spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
spi: spi-cadence: Reverse the order of interleaved write and read operations
spi: spi-imx: Use dev_err_probe for failed DMA channel requests
spi: bcm-qspi: fix SFDP BFPT read by usig mspi read
spi: intel-pci: Add support for Arrow Lake SPI serial flash
spi: intel-pci: Remove Meteor Lake-S SoC PCI ID from the list
Linus Torvalds [Fri, 26 Jan 2024 20:26:02 +0000 (12:26 -0800)]
Merge tag 'gpio-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add a quirk to GPIO ACPI handling to ignore touchpad wakeups on GPD
G1619-04
- clear interrupt status bits (that may have been set before enabling
the interrupts) after setting the interrupt type in gpio-eic-sprd
* tag 'gpio-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: eic-sprd: Clear interrupt after set the interrupt type
gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04
Linus Torvalds [Fri, 26 Jan 2024 20:11:49 +0000 (12:11 -0800)]
Merge tag 'media/v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- remove K3 DT prefix from wave5
- vb2 core: fix missing caps on VIDIO_CREATE_BUFS under certain
circumstances
- videobuf2: Stop direct calls to queue num_buffers field
* tag 'media/v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vb2: refactor setting flags and caps, fix missing cap
media: media videobuf2: Stop direct calls to queue num_buffers field
media: chips-media: wave5: Remove K3 References
dt-bindings: media: Remove K3 Family Prefix from Compatible
Shyam Sundar S K [Tue, 23 Jan 2024 14:14:58 +0000 (19:44 +0530)]
platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
AMD SFH driver has APIs defined to export the ambient light information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.
Shyam Sundar S K [Tue, 23 Jan 2024 14:14:57 +0000 (19:44 +0530)]
platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
AMD SFH driver has APIs defined to export the human presence information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.
- Fix the handling of scaling_max/min_freq sysfs attributes in the AMD
P-state cpufreq driver (Mario Limonciello).
- Make the intel_pstate cpufreq driver avoid unnecessary computation of
the HWP performance level corresponding to a given frequency in the
cases when it is known already, which also helps to avoid reducing
the maximum CPU capacity artificially on some systems (Rafael J.
Wysocki).
* pm-cpufreq:
cpufreq/amd-pstate: Fix setting scaling max/min freq values
cpufreq: intel_pstate: Refine computation of P-state for given frequency
Dave Airlie [Fri, 26 Jan 2024 18:12:14 +0000 (04:12 +1000)]
Merge tag 'drm-misc-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One regression fixup to samsung-dsim.c module
- The FORCE_STOP_STATE bit is ineffective for forcing DSI link into LP-11 mode,
causing timing issues and potential bridge failures.
This patch reverts previous commits and corrects this issue.
This commit causes some regressions in desktop usage, this will
reintroduce the original deadlock in DRI_PRIME situations, I've
got an idea to fix it by offloading to a workqueue in a different
spot, however this code has a race condition where we sometimes
miss interrupts so I'd like to fix that as well.
Dave Airlie [Fri, 26 Jan 2024 17:56:02 +0000 (03:56 +1000)]
Merge tag 'drm-misc-fixes-2024-01-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Plenty of ivpu fixes to improve the general stability and debugging, a
suspend fix for the anx7625 bridge, a revert to fix an initialization
order bug between i915 and simpledrm and a documentation warning fix for
dp_mst.
Andreas Larsson [Mon, 15 Jan 2024 15:02:00 +0000 (16:02 +0100)]
MAINTAINERS: Add Andreas Larsson as co-maintainer for arch/sparc
Dave has not been very active on arch/sparc for the past two years.
I have been contributing to the SPARC32 port as well as maintaining
out-of-tree SPARC32 patches for LEON3/4/5 (SPARCv8 with CAS support)
since 2012. I am willing to step up as an arch/sparc (co-)maintainer.
For recent discussions on the matter, see [1] and [2].
Michael Walle [Mon, 13 Nov 2023 16:43:44 +0000 (17:43 +0100)]
drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11
mode. It seems the bridge internally queues DSI packets and when the
FORCE_STOP_STATE bit is cleared, they are sent in close succession
without any useful timing (this also means that the DSI lanes won't go
into LP-11 mode). The length of this gibberish varies between 1ms and
5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this
case). In our case, the bridge will fail in about 1 per 500 reboots.
The FORCE_STOP_STATE handling was introduced to have the DSI lanes in
LP-11 state during the .pre_enable phase. But as it turns out, none of
this is needed at all. Between samsung_dsim_init() and
samsung_dsim_set_display_enable() the lanes are already in LP-11 mode.
The code as it was before commit 20c827683de0 ("drm: bridge:
samsung-dsim: Fix init during host transfer") and 0c14d3130654 ("drm:
bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct
in this regard.
This patch basically reverts both commits. It was tested on an i.MX8M
SoC with an SN65DSI84 bridge. The signals were probed and the DSI
packets were decoded during initialization and link start-up. After this
patch the first DSI packet on the link is a VSYNC packet and the timing
is correct.
Command mode between .pre_enable and .enable was also briefly tested by
a quick hack. There was no DSI link partner which would have responded,
but it was made sure the DSI packet was send on the link. As a side
note, the command mode seems to just work in HS mode. I couldn't find
that the bridge will handle commands in LP mode.
MIPS: lantiq: register smp_ops on non-smp platforms
Lantiq uses a common kernel config for devices with 24Kc and 34Kc cores.
The changes made previously to add support for interrupts on all cores
work on 24Kc platforms with SMP disabled and 34Kc platforms with SMP
enabled. This patch fixes boot issues on Danube (single core 24Kc) with
SMP enabled.
Fixes: 730320fd770d ("MIPS: lantiq: enable all hardware interrupts on second VPE") Signed-off-by: Aleksander Jan Bajkowski <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
Huang Pei [Tue, 23 Jan 2024 01:47:58 +0000 (09:47 +0800)]
MIPS: loongson64: set nid for reserved memblock region
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals
that reserved memblock regions have no valid node id set, just set it
right since loongson64 firmware makes it clear in memory layout info.
This works around booting failure on 3A1000+ since commit 61167ad5fecd
("mm: pass nid to reserve_bootmem_region()") under
CONFIG_DEFERRED_STRUCT_PAGE_INIT.
Huang Pei [Tue, 23 Jan 2024 01:47:57 +0000 (09:47 +0800)]
MIPS: reserve exception vector space ONLY ONCE
"cpu_probe" is called both by BP and APs, but reserving exception vector
(like 0x0-0x1000) called by "cpu_probe" need once and calling on APs is
too late since memblock is unavailable at that time.
Florian Fainelli [Tue, 23 Jan 2024 17:46:54 +0000 (09:46 -0800)]
MIPS: BCM63XX: Fix missing prototypes
Most of the symbols for which we do not have a prototype can actually be
made static and for the few that cannot, there is already a declaration
in a header for it.
Randy Dunlap [Fri, 26 Jan 2024 08:22:07 +0000 (16:22 +0800)]
LoongArch: KVM: Add returns to SIMD stubs
The stubs for kvm_own/lsx()/kvm_own_lasx() when CONFIG_CPU_HAS_LSX or
CONFIG_CPU_HAS_LASX is not defined should have a return value since they
return an int, so add "return -EINVAL;" to the stubs.
Fixes the build error:
In file included from ../arch/loongarch/include/asm/kvm_csr.h:12,
from ../arch/loongarch/kvm/interrupt.c:8:
../arch/loongarch/include/asm/kvm_vcpu.h: In function 'kvm_own_lasx':
../arch/loongarch/include/asm/kvm_vcpu.h:73:39: error: no return statement in function returning non-void [-Werror=return-type]
73 | static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { }
Huacai Chen [Fri, 26 Jan 2024 08:22:07 +0000 (16:22 +0800)]
LoongArch: KVM: Fix build due to API changes
Commit 8569992d64b8f750e34b7858eac ("KVM: Use gfn instead of hva for
mmu_notifier_retry") replaces mmu_invalidate_retry_hva() usage with
mmu_invalidate_retry_gfn() for X86, LoongArch also need similar changes
to fix build.
Huacai Chen [Fri, 26 Jan 2024 08:22:07 +0000 (16:22 +0800)]
LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
Machines which have more than 8 nodes fail to boot SMP after commit a2ccf46333d7b2cf96 ("LoongArch/smp: Call rcutree_report_cpu_starting()
earlier"). Because such machines use tlb-based per-cpu base address
rather than dmw-based per-cpu base address, resulting per-cpu variables
can only be accessed after tlb_init(). But rcutree_report_cpu_starting()
is now called before tlb_init() and accesses per-cpu variables indeed.
Since the original patch want to avoid the lockdep warning caused by
page allocation in tlb_init(), we can move rcutree_report_cpu_starting()
to tlb_init() where after tlb exception configuration but before page
allocation.
Matthew Brost [Wed, 24 Jan 2024 21:08:11 +0000 (13:08 -0800)]
drm/sched: Drain all entities in DRM sched run job worker
All entities must be drained in the DRM scheduler run job worker to
avoid the following case. An entity found that is ready, no job found
ready on entity, and run job worker goes idle with other entities + jobs
ready. Draining all ready entities (i.e. loop over all ready entities)
in the run job worker ensures all job that are ready will be scheduled.
Dave Airlie [Fri, 26 Jan 2024 02:39:51 +0000 (12:39 +1000)]
Merge tag 'amd-drm-fixes-6.8-2024-01-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-01-25:
amdgpu:
- AC/DC power supply tracking fix
- Don't show invalid vram vendor data
- SMU 13.0.x fixes
- GART fix for umr on systems without VRAM
- GFX 10/11 UNORD_DISPATCH fixes
- IPS display fixes (required for S0ix on some platforms)
- Misc fixes
Dave Airlie [Thu, 25 Jan 2024 20:09:13 +0000 (06:09 +1000)]
Merge tag 'drm-xe-fixes-2024-01-25' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Make an ops struct static
- Fix an implicit 0 to NULL conversion
- A couple of 32-bit fixes
- A migration coherency fix for Lunar Lake.
- An error path vm id leak fix
- Remove PVC references in kunit tests
Kent Overstreet [Wed, 24 Jan 2024 22:26:33 +0000 (17:26 -0500)]
bcachefs: __lookup_dirent() works in snapshot, not subvol
Add a new helper, bch2_hash_lookup_in_snapshot(), for when we're not
operating in a subvolume and already have a snapshot ID, and then use it
in lookup_lostfound() -> __lookup_dirent().
This is a bugfix - lookup_lostfound() doesn't take a subvolume ID, we
were passing a nonsense subvolume ID before, and don't have one to pass
since we may be operating in an interior snapshot node that doesn't have
a subvolume ID.
David Lechner [Thu, 25 Jan 2024 20:53:09 +0000 (14:53 -0600)]
spi: fix finalize message on error return
In __spi_pump_transfer_message(), the message was not finalized in the
first error return as it is in the other error return paths. Not
finalizing the message could cause anything waiting on the message to
complete to hang forever.
This adds the missing call to spi_finalize_current_message().
Roman Li [Tue, 23 Jan 2024 20:18:24 +0000 (15:18 -0500)]
drm/amd/display: "Enable IPS by default"
[Why]
IPS was temporary disabled due to instability.
It was fixed in dmub firmware and with:
- "drm/amd/display: Add IPS checks before dcn register access"
- "drm/amd/display: Disable ips before dc interrupt setting"
[How]
Enable IPS by default.
Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params
Roman Li [Tue, 9 Jan 2024 22:31:33 +0000 (17:31 -0500)]
drm/amd/display: Add IPS checks before dcn register access
[Why]
With IPS enabled a system hangs once PSR is active.
PSR active triggers transition to IPS2 state.
While in IPS2 an access to dcn registers results in hard hang.
Existing check doesn't cover for PSR sequence.
[How]
Safeguard register access by disabling idle optimization in atomic commit
and crtc scanout. It will be re-enabled on next vblank.
Alex Deucher [Fri, 19 Jan 2024 17:32:59 +0000 (12:32 -0500)]
drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Alex Deucher [Fri, 19 Jan 2024 17:23:55 +0000 (12:23 -0500)]
drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Ma Jun [Wed, 17 Jan 2024 06:35:29 +0000 (14:35 +0800)]
drm/amdgpu/pm: Fix the power source flag error
The power source flag should be updated when
[1] System receives an interrupt indicating that the power source
has changed.
[2] System resumes from suspend or runtime suspend
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Linus Torvalds [Thu, 25 Jan 2024 18:58:35 +0000 (10:58 -0800)]
Merge tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
Linus Torvalds [Thu, 25 Jan 2024 18:52:30 +0000 (10:52 -0800)]
Merge tag 'ovl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fix from Amir Goldstein:
"Change the on-disk format for the new "xwhiteouts" feature introduced
in v6.7
The change reduces unneeded overhead of an extra getxattr per readdir.
The only user of the "xwhiteout" feature is the external composefs
tool, which has been updated to support the new on-disk format.
This change is also designated for 6.7.y"
* tag 'ovl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: mark xwhiteouts directory with overlay.opaque='x'
Linus Torvalds [Thu, 25 Jan 2024 18:41:29 +0000 (10:41 -0800)]
Merge tag 'vfs-6.8-rc2.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs fixes from Christian Brauner:
"This contains various fixes for the netfs work merged earlier this
cycle:
afs:
- Fix locking imbalance in afs_proc_addr_prefs_show()
- Remove afs_dynroot_d_revalidate() which is redundant
- Fix error handling during lookup
- Hide sillyrenames from userspace. This fixes a race between
silly-rename files being created/removed and userspace iterating
over directory entries
- Don't use unnecessary folio_*() functions
cifs:
- Don't use unnecessary folio_*() functions
cachefiles:
- erofs: Fix Null dereference when cachefiles are not doing
ondemand-mode
- Update mailing list
netfs library:
- Add Jeff Layton as reviewer
- Update mailing list
- Fix a error checking in netfs_perform_write()
- fscache: Check error before dereferencing
- Don't use unnecessary folio_*() functions"
* tag 'vfs-6.8-rc2.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix missing/incorrect unlocking of RCU read lock
afs: Remove afs_dynroot_d_revalidate() as it is redundant
afs: Fix error handling with lookup via FS.InlineBulkStatus
afs: Hide silly-rename files from userspace
cachefiles, erofs: Fix NULL deref in when cachefiles is not doing ondemand-mode
netfs: Fix a NULL vs IS_ERR() check in netfs_perform_write()
netfs, fscache: Prevent Oops in fscache_put_cache()
cifs: Don't use certain unnecessary folio_*() functions
afs: Don't use certain unnecessary folio_*() functions
netfs: Don't use certain unnecessary folio_*() functions
netfs: Add Jeff Layton as reviewer
netfs, cachefiles: Change mailing list
Linus Torvalds [Thu, 25 Jan 2024 18:26:52 +0000 (10:26 -0800)]
Merge tag 'nfsd-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix in-kernel RPC UDP transport
- Fix NFSv4.0 RELEASE_LOCKOWNER
* tag 'nfsd-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix RELEASE_LOCKOWNER
SUNRPC: use request size to initialize bio_vec in svc_udp_sendto()
Linus Torvalds [Thu, 25 Jan 2024 18:21:21 +0000 (10:21 -0800)]
Merge tag 'urgent-rcu.2024.01.24a' of https://github.com/neeraju/linux
Pull RCU fix from Neeraj Upadhyay:
"This fixes RCU grace period stalls, which are observed when an
outgoing CPU's quiescent state reporting results in wakeup of one of
the grace period kthreads, to complete the grace period.
If those kthreads have SCHED_FIFO policy, the wake up can indirectly
arm the RT bandwith timer to the local offline CPU.
Earlier migration of the hrtimers from the CPU introduced in commit 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU
earlier") results in this timer getting ignored.
If the RCU grace period kthreads are waiting for RT bandwidth to be
available, they may never be actually scheduled, resulting in RCU
stall warnings"
* tag 'urgent-rcu.2024.01.24a' of https://github.com/neeraju/linux:
rcu: Defer RCU kthreads wakeup when CPU is dying
Arnd Bergmann [Thu, 25 Jan 2024 17:23:10 +0000 (18:23 +0100)]
Merge tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v6.8
1. Google GS101: Correct the input clock names to CMU MISC clock
controller to match received review. The review was initially missed
and CMU MISC clock controller bindings, driver and DTS was merged
into v6.8-rc1 with different names. Nothing was released so far, so
the bindings and driver can be still corrected to match review.
2. Samsung Galaxy Tab3: Fix display by using correct vclk polarity in
display node.
* tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
Arnd Bergmann [Thu, 25 Jan 2024 17:21:50 +0000 (18:21 +0100)]
Merge tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.8
Quite a few fixes addressing issues around missing RW lock initialisation
in ffa_setup_partitions(), missing check for xa_load() return value,
use of xa_insert instead of xa_store to flag case of duplicate insertion.
It also simplifies ffa_partitions_cleanup() with xa_for_each() and xa_erase()
instead of xa_extract() and kfree(). Finally it includes fixes around
handling of partitions setup failures during initialisation.
* tag 'ffa-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Handle partitions setup failures
firmware: arm_ffa: Use xa_insert() and check for result
firmware: arm_ffa: Simplify ffa_partitions_cleanup()
firmware: arm_ffa: Check xa_load() return value
firmware: arm_ffa: Add missing rwlock_init() for the driver partition
firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()
Arnd Bergmann [Thu, 25 Jan 2024 17:21:29 +0000 (18:21 +0100)]
Merge tag 'scmi-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.8
Few fixes addressing the below issues:
1. A spurious IRQ related to the late reply can get wrongly associated
with the new enqueued request resulting in misinterpretation of data
in shared memory. This race-condition can be detected by looking at
the channel status bits which the platform must set to the channel
free before triggering the completion IRQ. Adding a consistency check
to validate such condition will fix the issue.
2. Incorrect use of asm-generic/bug.h instead of generic linux/bUg.h
3. xa_store() can't check for possible duplication insertion, use
xa_insert() instead
4. Fix the SCMI clock protocol version in the v3.2 SCMI specification
5. Incorrect upgrade of highest supported clock protocol version from
v2.0 to v3.0
* tag 'scmi-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix the clock protocol supported version
firmware: arm_scmi: Fix the clock protocol version for v3.2
firmware: arm_scmi: Use xa_insert() when saving raw queues
firmware: arm_scmi: Use xa_insert() to store opps
firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.h
firmware: arm_scmi: Check mailbox/SMT channel for consistency
Lukas Wunner [Sat, 13 Jan 2024 18:06:56 +0000 (19:06 +0100)]
arm64: dts: Fix TPM schema violations
Since commit 26c9d152ebf3 ("dt-bindings: tpm: Consolidate TCG TIS
bindings"), several issues are reported by "make dtbs_check" for arm64
devicetrees:
The compatible property needs to contain the chip's name in addition to
the generic "tcg,tpm_tis-spi" and the nodename needs to be "tpm@0"
rather than "cr50@0":
tpm@1: compatible: ['tcg,tpm_tis-spi'] is too short
from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
cr50@0: $nodename:0: 'cr50@0' does not match '^tpm(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/tpm/google,cr50.yaml#
Lukas Wunner [Sat, 13 Jan 2024 09:03:51 +0000 (10:03 +0100)]
ARM: dts: Fix TPM schema violations
Since commit 26c9d152ebf3 ("dt-bindings: tpm: Consolidate TCG TIS
bindings"), several issues are reported by "make dtbs_check" for ARM
devicetrees:
The nodename needs to be "tpm@0" rather than "tpmdev@0" and the
compatible property needs to contain the chip's name in addition to the
generic "tcg,tpm_tis-spi" or "tcg,tpm-tis-i2c":
tpmdev@0: $nodename:0: 'tpmdev@0' does not match '^tpm(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
tpm@2e: compatible: 'oneOf' conditional failed, one must be fixed:
['tcg,tpm-tis-i2c'] is too short
from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml#
Fix these schema violations.
Aspeed Facebook BMCs use an Infineon SLB9670:
https://lore.kernel.org/all/ZZSmMJ%2F%2Fl972Qbxu@fedora/
https://lore.kernel.org/all/ZZT4%2Fw2eVzMhtsPx@fedora/
https://lore.kernel.org/all/[email protected]/
Aspeed Tacoma uses a Nuvoton NPCT75X per commit 39d8a73c53a2 ("ARM: dts:
aspeed: tacoma: Add TPM").
A single schema violation remains in am335x-moxa-uc-2100-common.dtsi
because it is unknown which chip is used on the board. The devicetree's
author has been asked for clarification but has not responded so far:
https://lore.kernel.org/all/20231220090910[email protected]/
ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an
ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was
observed that was immediately preceded by the following kernel
messages:
The first message is produced by code in drivers/iommu/dma-iommu.c
which is accompanied by the following comment that seems to apply:
/*
* Try to use all the 32-bit PCI addresses first. The original SAC vs.
* DAC reasoning loses relevance with PCIe, but enough hardware and
* firmware bugs are still lurking out there that it's safest not to
* venture into the 64-bit space until necessary.
*
* If your device goes wrong after seeing the notice then likely either
* its driver is not setting DMA masks accurately, the hardware has
* some inherent bug in handling >32-bit addresses, or not all the
* expected address bits are wired up between the device and the IOMMU.
*/
Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual
address 0xffffffff00000000 produces the following I/O page faults:
Note that the upper 21 bits of the logged DMA address are zero. (When
asking a different PCIe device in the same PCIe slot to DMA to the
same I/O virtual address, we do see all the upper 32 bits of the DMA
address as 1, so this is not an issue with the chipset or IOMMU
configuration on the test system.)
Also, hacking libahci to always set the upper 21 bits of all DMA
addresses to 1 produces no discernible effect on the behavior of the
ASM1061, and mkfs/mount/scrub/etc work as without this hack.
This all strongly suggests that the ASM1061 has a 43 bit DMA address
limit, and this commit therefore adds a quirk to deal with this limit.
This issue probably applies to (some of) the other supported ASMedia
parts as well, but we limit it to the PCI IDs known to refer to
ASM1061 parts, as that's the only part we know for sure to be affected
by this issue at this point.
Gerhard Engleder [Tue, 23 Jan 2024 20:09:18 +0000 (21:09 +0100)]
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
The fill ring of the XDP socket may contain not enough buffers to
completey fill the RX queue during socket creation. In this case the
flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX
queue is not completely filled during polling.
Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled
during XDP socket creation.
Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Gerhard Engleder [Tue, 23 Jan 2024 20:09:17 +0000 (21:09 +0100)]
tsnep: Remove FCS for XDP data path
The RX data buffer includes the FCS. The FCS is already stripped for the
normal data path. But for the XDP data path the FCS is included and
acts like additional/useless data.
Remove the FCS from the RX data buffer also for XDP.
Paolo Abeni [Thu, 25 Jan 2024 10:42:27 +0000 (11:42 +0100)]
Merge tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-01-24
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: fix a potential double-free in fs_any_create_groups
net/mlx5e: fix a double-free in arfs_create_groups
net/mlx5e: Ignore IPsec replay window values on sender side
net/mlx5e: Allow software parsing when IPsec crypto is enabled
net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO
net/mlx5: DR, Can't go to uplink vport on RX rule
net/mlx5: DR, Use the right GVMI number for drop action
net/mlx5: Bridge, fix multicast packets sent to uplink
net/mlx5: Fix a WARN upon a callback command failure
net/mlx5e: Fix peer flow lists handling
net/mlx5e: Fix inconsistent hairpin RQT sizes
net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context
net/mlx5: Fix query of sd_group field
net/mlx5e: Use the correct lag ports number when creating TISes
====================
Paolo Abeni [Thu, 25 Jan 2024 10:30:31 +0000 (11:30 +0100)]
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-01-25
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 2 day(s) which contain
a total of 13 files changed, 190 insertions(+), 91 deletions(-).
The main changes are:
1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which
support XDP multi-buffer. The former triggered a NULL pointer
dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar.
2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and
epilogue for struct_ops programs, from Pu Lehui.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops
====================
Shenwei Wang [Tue, 23 Jan 2024 16:51:41 +0000 (10:51 -0600)]
net: fec: fix the unhandled context fault from smmu
When repeatedly changing the interface link speed using the command below:
ethtool -s eth0 speed 100 duplex full
ethtool -s eth0 speed 1000 duplex full
The following errors may sometimes be reported by the ARM SMMU driver:
[ 5395.035364] fec 5b040000.ethernet eth0: Link is Down
[ 5395.039255] arm-smmu 51400000.iommu: Unhandled context fault:
fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2
[ 5398.108460] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full -
flow control off
It is identified that the FEC driver does not properly stop the TX queue
during the link speed transitions, and this results in the invalid virtual
I/O address translations from the SMMU and causes the context faults.
- Synchronize job submission with reset/recovery using reset_lock
- Always print recovery reason and call diagnose_failure()
- Don't allow for autosupend during recovery
- Prevent immediate autosuspend after reset/recovery
- Prevent force_recovery for issuing TDR when device is suspended
- Reset VPU instead triggering recovery after changing debugfs params
accel/ivpu: Improve stability of ivpu_submit_ioctl()
- Wake up the device as late as possible
- Remove job reference counting in order to simplify the code
- Don't put jobs that are not fully submitted on submitted_jobs_xa in
order to avoid potential races with reset/recovery
- Add context_list_lock to synchronize user context addition/removal
- Use drm_dev_enter() to prevent unbinding the device during ivpu_open()
and vpu address allocation
Tim Chen [Mon, 22 Jan 2024 23:35:34 +0000 (15:35 -0800)]
tick/sched: Preserve number of idle sleeps across CPU hotplug events
Commit 71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs
CPU hotplug") preserved total idle sleep time and iowait sleeptime across
CPU hotplug events.
Similar reasoning applies to the number of idle calls and idle sleeps to
get the proper average of sleep time per idle invocation.
Hangbin Liu [Tue, 23 Jan 2024 07:59:17 +0000 (15:59 +0800)]
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
The prio_arp/ns tests hard code the mode to active-backup. At the same
time, The balance-alb/tlb modes do not support arp/ns target. So remove
the prio_arp/ns tests from the loop and only test active-backup mode.
Ville Syrjälä [Thu, 18 Jan 2024 21:21:31 +0000 (23:21 +0200)]
drm/i915/psr: Only allow PSR in LPSP mode on HSW non-ULT
On HSW non-ULT (or at least on Dell Latitude E6540) external displays
start to flicker when we enable PSR on the eDP. We observe a much higher
SR and PC6 residency than should be possible with an external display,
and indeen much higher than what we observe with eDP disabled and
only the external display enabled. Looks like the hardware is somehow
ignoring the fact that the external display is active during PSR.
I wasn't able to redproduce this on my HSW ULT machine, or BDW.
So either there's something specific about this particular laptop
(eg. some unknown firmware thing) or the issue is limited to just
non-ULT HSW systems. All known registers that could affect this
look perfectly reasonable on the affected machine.
As a workaround let's unmask the LPSP event to prevent PSR entry
except while in LPSP mode (only pipe A + eDP active). This
will prevent PSR entry entirely when multiple pipes are active.
The one slight downside is that we now also prevent PSR entry
when driving eDP with pipe B or C, but I think that's a reasonable
tradeoff to avoid having to implement a more complex workaround.
Jiri Wiesner [Mon, 22 Jan 2024 17:23:50 +0000 (18:23 +0100)]
clocksource: Skip watchdog check for large watchdog intervals
There have been reports of the watchdog marking clocksources unstable on
machines with 8 NUMA nodes:
clocksource: timekeeping watchdog on CPU373:
Marking clocksource 'tsc' as unstable because the skew is too large:
clocksource: 'hpet' wd_nsec: 14523447520
clocksource: 'tsc' cs_nsec: 14524115132
The measured clocksource skew - the absolute difference between cs_nsec
and wd_nsec - was 668 microseconds:
The kernel used 200 microseconds for the uncertainty_margin of both the
clocksource and watchdog, resulting in a threshold of 400 microseconds (the
md variable). Both the cs_nsec and the wd_nsec value indicate that the
readout interval was circa 14.5 seconds. The observed behaviour is that
watchdog checks failed for large readout intervals on 8 NUMA node
machines. This indicates that the size of the skew was directly proportinal
to the length of the readout interval on those machines. The measured
clocksource skew, 668 microseconds, was evaluated against a threshold (the
md variable) that is suited for readout intervals of roughly
WATCHDOG_INTERVAL, i.e. HZ >> 1, which is 0.5 second.
The intention of 2e27e793e280 ("clocksource: Reduce clocksource-skew
threshold") was to tighten the threshold for evaluating skew and set the
lower bound for the uncertainty_margin of clocksources to twice
WATCHDOG_MAX_SKEW. Later in c37e85c135ce ("clocksource: Loosen clocksource
watchdog constraints"), the WATCHDOG_MAX_SKEW constant was increased to
125 microseconds to fit the limit of NTP, which is able to use a
clocksource that suffers from up to 500 microseconds of skew per second.
Both the TSC and the HPET use default uncertainty_margin. When the
readout interval gets stretched the default uncertainty_margin is no
longer a suitable lower bound for evaluating skew - it imposes a limit
that is far stricter than the skew with which NTP can deal.
The root causes of the skew being directly proportinal to the length of
the readout interval are:
* the inaccuracy of the shift/mult pairs of clocksources and the watchdog
* the conversion to nanoseconds is imprecise for large readout intervals
Prevent this by skipping the current watchdog check if the readout
interval exceeds 2 * WATCHDOG_INTERVAL. Considering the maximum readout
interval of 2 * WATCHDOG_INTERVAL, the current default uncertainty margin
(of the TSC and HPET) corresponds to a limit on clocksource skew of 250
ppm (microseconds of skew per second). To keep the limit imposed by NTP
(500 microseconds of skew per second) for all possible readout intervals,
the margins would have to be scaled so that the threshold value is
proportional to the length of the actual readout interval.
As for why the readout interval may get stretched: Since the watchdog is
executed in softirq context the expiration of the watchdog timer can get
severely delayed on account of a ksoftirqd thread not getting to run in a
timely manner. Surely, a system with such belated softirq execution is not
working well and the scheduling issue should be looked into but the
clocksource watchdog should be able to deal with it accordingly.
Mikulas Patocka [Wed, 17 Jan 2024 18:22:36 +0000 (19:22 +0100)]
md: fix a suspicious RCU usage warning
RCU protection was removed in the commit 2d32777d60de ("raid1: remove rcu
protection to access rdev from conf").
However, the code in fix_read_error does rcu_dereference outside
rcu_read_lock - this triggers the following warning. The warning is
triggered by a LVM2 test shell/integrity-caching.sh.
projects / linux.git / log