Merge tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
Merge tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.12-rc1.
Nothing "major" in here, except for a new 9p network gadget that has
been worked on for a long time (all of the needed acks are here)
Other than that, it's the usual set of:
- Thunderbolt / USB4 driver updates and additions for new hardware
- dwc3 driver updates and new features added
- xhci driver updates
- typec driver updates
- USB gadget updates and api additions to make some gadgets more
configurable by userspace
- dwc2 driver updates
- usb phy driver updates
- usbip feature additions
- other minor USB driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
sub: cdns3: Use predefined PCI vendor ID constant
sub: cdns2: Use predefined PCI vendor ID constant
USB: misc: yurex: fix race between read and write
USB: misc: cypress_cy7c63: check for short transfer
USB: appledisplay: close race between probe and completion handler
USB: class: CDC-ACM: fix race between get_serial and set_serial
usb: r8a66597-hcd: make read-only const arrays static
usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
usb: storage: ene_ub6250: Fix right shift warnings
usb: roles: Improve the fix for a false positive recursive locking complaint
locking/mutex: Introduce mutex_init_with_key()
locking/mutex: Define mutex_init() once
net/9p/usbg: fix CONFIG_USB_GADGET dependency
usb: xhci: fix loss of data on Cadence xHC
usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
...
Merge tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
"A revert of Device Tree binding for Goodix SPI HID driver (while
keeping ACPI still available), as it conflicted with already existing
binding and the original submitter didn't respond in time with a fix.
We will be looking into ways how to reintroduce it properly (we have
to agree on a way how to handle cases where vendor uses the very same
product ID for I2C and SPI parts, leading to this kind conflict). But
before that is settled, let's revert the to unbreak everybody else
(Krzysztof Kozlowski)"
* tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
dt-bindings: input: Revert "dt-bindings: input: Goodix SPI HID Touchscreen"
HID: hid-goodix: drop unsupported and undocumented DT part
Merge tag 'v6.12-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Most are from the recent SMB3.1.1 test event, and also an important
netfs fix for a cifs mtime write regression
- fix mode reported by stat of readonly directories and files
- DFS (global namespace) related fixes
- fixes for special file support via reparse points
- mount improvement and reconnect fix
- fix for noisy log message on umount
- two netfs related fixes, one fixing a recent regression, and add
new write tracepoint"
* tag 'v6.12-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
netfs, cifs: Fix mtime/ctime update for mmapped writes
cifs: update internal version number
smb: client: print failed session logoffs with FYI
cifs: Fix reversion of the iter in cifs_readv_receive().
smb3: fix incorrect mode displayed for read-only files
smb: client: fix parsing of device numbers
smb: client: set correct device number on nfs reparse points
smb: client: propagate error from cifs_construct_tcon()
smb: client: fix DFS failover in multiuser mounts
cifs: Make the write_{enter,done,err} tracepoints display netfs info
smb: client: fix DFS interlink failover
smb: client: improve purging of cached referrals
smb: client: avoid unnecessary reconnects when refreshing referrals
Merge tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- uprobes: make trace_uprobe->nhit counter a per-CPU one
This makes uprobe event's hit counter per-CPU for improving
scalability on multi-core environment
- kprobes: Remove obsoleted declaration for init_test_probes
Remove unused init_test_probes() from header
- Raw tracepoint probe supports raw tracepoint events on modules:
- add a function for iterating over all tracepoints in all modules
- add a function for iterating over tracepoints in a module
- support raw tracepoint events on modules
- support raw tracepoints on future loaded modules
- add a test for tracepoint events on modules"
* tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
sefltests/tracing: Add a test for tracepoint events on modules
tracing/fprobe: Support raw tracepoints on future loaded modules
tracing/fprobe: Support raw tracepoint events on modules
tracepoint: Support iterating tracepoints in a loading module
tracepoint: Support iterating over tracepoints on modules
kprobes: Remove obsoleted declaration for init_test_probes
uprobes: turn trace_uprobe's nhit counter to be per-CPU one
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-balloon supports new stats
- vdpa supports setting mac address
- vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
- virtio_fs supports new sysfs entries for queue info
- virtio/vsock performance has been improved
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vsock/virtio: avoid queuing packets when intermediate queue is empty
vsock/virtio: refactor virtio_transport_send_pkt_work
fw_cfg: Constify struct kobj_type
vdpa/mlx5: Postpone MR deletion
vdpa/mlx5: Introduce init/destroy for MR resources
vdpa/mlx5: Rename mr_mtx -> lock
vdpa/mlx5: Extract mr members in own resource struct
vdpa/mlx5: Rename function
vdpa/mlx5: Delete direct MKEYs in parallel
vdpa/mlx5: Create direct MKEYs in parallel
MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
virtio_fs: add sysfs entries for queue information
virtio_fs: introduce virtio_fs_put_locked helper
vdpa: Remove unused declarations
vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
vdpa/mlx5: Small improvement for change_num_qps()
vdpa/mlx5: Keep notifiers during suspend but ignore
vdpa/mlx5: Parallelize device resume
vdpa/mlx5: Parallelize device suspend
vdpa/mlx5: Use async API for vq modify commands
...
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
Merge tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Some driver specific fixes that came in during the merge window.
Lorenzo Bianconi did some extra testing on the recently added arioha
driver and found some issues, Alexander Dahl fixed some issues with
signal delays in the Atmel QSPI driver and Jinjie Ruan has been fixing
some nits with runtime PM cleanup"
* tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel-quadspi: Avoid overwriting delay register settings
spi: airoha: remove read cache in airoha_snand_dirmap_read()
spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time
spi: atmel-quadspi: Undo runtime PM changes at driver exit time
spi: airoha: fix airoha_snand_{write,read}_data data_len estimation
spi: airoha: fix dirmap_{read,write} operations
Merge tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More conversions of DT bindings to yaml. There is one new driver, for
the DFRobot SD2405AL and support for important features of the stm32
RTC. Summary:
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range"
* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rc5t619: use proper module tables
rtc: m48t59: set range
dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
rtc: m48t59: Remove division condition with direct comparison
rtc: at91sam9: fix OF node leak in probe() error path
rtc: sun6i: disable automatic clock input switching
dt-bindings: rtc: Drop non-trivial duplicate compatibles
dt-bindings: vendor-prefixes: Add DFRobot.
dt-bindings: rtc: Add support for SD2405AL.
rtc: Add driver for SD2405AL
rtc: s35390a: Drop vendorless compatible string from match table
rtc: twl: convert comma to semicolon
dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
rtc: stm32: add alarm A out feature
rtc: stm32: add Low Speed Clock Output (LSCO) support
rtc: stm32: add pinctrl and pinmux interfaces
dt-bindings: rtc: stm32: describe pinmux nodes
This reverts commit 9184b17fbc23 ("dt-bindings: input: Goodix SPI HID
Touchscreen") because it duplicates existing binding leadings to errors:
goodix,gt7986u.example.dtb:
touchscreen@0: compatible: 'oneOf' conditional failed, one must be fixed:
['goodix,gt7986u'] is too short
'goodix,gt7375p' was expected
This was reported on mailing list on 6th of September, but no reaction
happened from contributor or maintainer to fix it.
Therefore let's drop binding which breaks and duplicates existing one.
HID: hid-goodix: drop unsupported and undocumented DT part
Drop support for Devicetree from, because the binding is being reverted
(on basis of duplicating existing binding) and property was not added to
the original binding.
Merge tag 'memblock-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- new memblock_estimated_nr_free_pages() helper to replace
totalram_pages() which is less accurate when
CONFIG_DEFERRED_STRUCT_PAGE_INIT is set
- fixes for memblock tests
* tag 'memblock-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
s390/mm: get estimated free pages by memblock api
kernel/fork.c: get estimated free pages by memblock api
mm/memblock: introduce a new helper memblock_estimated_nr_free_pages()
memblock test: fix implicit declaration of function 'strscpy'
memblock test: fix implicit declaration of function 'isspace'
memblock test: fix implicit declaration of function 'memparse'
memblock test: add the definition of __setup()
memblock test: fix implicit declaration of function 'virt_to_phys'
tools/testing: abstract two init.h into common include directory
memblock tests: include export.h in linkage.h as kernel dose
memblock tests: include memory_hotplug.h in mmzone.h as kernel dose
Merge tag 'sparc-for-6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc32 update from Andreas Larsson:
- Remove an unused variable for sparc32
* tag 'sparc-for-6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
arch/sparc: remove unused varible paddrbase in function leon_swprobe()
Merge tag 'powerpc-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix build error in vdso32 when building 64-bit with COMPAT=y and -Os
- Fix build error in pseries EEH when CONFIG_DEBUG_FS is not set
Thanks to Christophe Leroy, Narayana Murty N, Christian Zigotzky, and
Ritesh Harjani.
* tag 'powerpc-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/eeh: move pseries_eeh_err_inject() outside CONFIG_DEBUG_FS block
powerpc/vdso32: Fix use of crtsavres for PPC64
Kbuild: make MODVERSIONS support depend on not being a compile test build
Currently the Rust support is gated on not having MODVERSIONS enabled,
and as a result an "allmodconfig" build will disable Rust build tests.
While MODVERSIONS configurations are worth build testing, the feature is
not actually meaningful unless you run the result, and I'd rather get
build coverage of Rust than MODVERSIONS. So let's disable MODVERSIONS
for build testing until the Rust side clears up.
Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
tracing/fprobe: Support raw tracepoints on future loaded modules
Support raw tracepoint events on future loaded (unloaded) modules.
This allows user to create raw tracepoint events which can be used from
module's __init functions.
Note: since the kernel does not have any information about the tracepoints
in the unloaded modules, fprobe events can not check whether the tracepoint
exists nor extend the BTF based arguments.
tracing/fprobe: Support raw tracepoint events on modules
Support raw tracepoint event on module by fprobe events.
Since it only uses for_each_kernel_tracepoint() to find a tracepoint,
the tracepoints on modules are not handled. Thus if user specified a
tracepoint on a module, it shows an error.
This adds new for_each_module_tracepoint() API to tracepoint subsystem,
and uses it to find tracepoints on modules.
tracepoint: Support iterating tracepoints in a loading module
Add for_each_tracepoint_in_module() function to iterate tracepoints in
a module. This API is needed for handling tracepoints in a loading
module from tracepoint_module_notifier callback function.
This also update for_each_module_tracepoint() to pass the module to
callback function so that it can find module easily.
tracepoint: Support iterating over tracepoints on modules
Add for_each_module_tracepoint() for iterating over tracepoints
on modules. This is similar to the for_each_kernel_tracepoint()
but only for the tracepoints on modules (not including kernel
built-in tracepoints).
Andrii Nakryiko [Tue, 13 Aug 2024 20:34:09 +0000 (13:34 -0700)]
uprobes: turn trace_uprobe's nhit counter to be per-CPU one
trace_uprobe->nhit counter is not incremented atomically, so its value
is questionable in when uprobe is hit on multiple CPUs simultaneously.
Also, doing this shared counter increment across many CPUs causes heavy
cache line bouncing, limiting uprobe/uretprobe performance scaling with
number of CPUs.
Solve both problems by making this a per-CPU counter.
Luigi Leonardi [Tue, 30 Jul 2024 19:47:32 +0000 (21:47 +0200)]
vsock/virtio: avoid queuing packets when intermediate queue is empty
When the driver needs to send new packets to the device, it always
queues the new sk_buffs into an intermediate queue (send_pkt_queue)
and schedules a worker (send_pkt_work) to then queue them into the
virtqueue exposed to the device.
This increases the chance of batching, but also introduces a lot of
latency into the communication. So we can optimize this path by
adding a fast path to be taken when there is no element in the
intermediate queue, there is space available in the virtqueue,
and no other process that is sending packets (tx_lock held).
The following benchmarks were run to check improvements in latency and
throughput. The test bed is a host with Intel i7-10700KF CPU @ 3.80GHz
and L1 guest running on QEMU/KVM with vhost process and all vCPUs
pinned individually to pCPUs.
- Latency
Tool: Fio version 3.37-56
Mode: pingpong (h-g-h)
Test runs: 50
Runtime-per-test: 50s
Type: SOCK_STREAM
In the following fio benchmark (pingpong mode) the host sends
a payload to the guest and waits for the same payload back.
fio process pinned both inside the host and the guest system.
Before: Linux 6.9.8
Payload 64B:
1st perc. overall 99th perc.
Before 12.91 16.78 42.24 us
After 9.77 13.57 39.17 us
Payload 512B:
1st perc. overall 99th perc.
Before 13.35 17.35 41.52 us
After 10.25 14.11 39.58 us
Payload 4K:
1st perc. overall 99th perc.
Before 14.71 19.87 41.52 us
After 10.51 14.96 40.81 us
- Throughput
Tool: iperf-vsock
The size represents the buffer length (-l) to read/write
P represents the number of parallel streams
P=1
4K 64K 128K
Before 6.87 29.3 29.5 Gb/s
After 10.5 39.4 39.9 Gb/s
P=2
4K 64K 128K
Before 10.5 32.8 33.2 Gb/s
After 17.8 47.7 48.5 Gb/s
P=4
4K 64K 128K
Before 12.7 33.6 34.2 Gb/s
After 16.9 48.1 50.5 Gb/s
The performance improvement is related to this optimization,
I used a ebpf kretprobe on virtio_transport_send_skb to check
that each packet was sent directly to the virtqueue
Preliminary patch to introduce an optimization to the
enqueue system.
All the code used to enqueue a packet into the virtqueue
is removed from virtio_transport_send_pkt_work()
and moved to the new virtio_transport_send_skb() function.
Dragos Tatulea [Fri, 30 Aug 2024 10:58:38 +0000 (13:58 +0300)]
vdpa/mlx5: Postpone MR deletion
Currently, when a new MR is set up, the old MR is deleted. MR deletion
is about 30-40% the time of MR creation. As deleting the old MR is not
important for the process of setting up the new MR, this operation
can be postponed.
This series adds a workqueue that does MR garbage collection at a later
point. If the MR lock is taken, the handler will back off and
reschedule. The exception during shutdown: then the handler must
not postpone the work.
Note that this is only a speculative optimization: if there is some
mapping operation that is triggered while the garbage collector handler
has the lock taken, this operation it will have to wait for the handler
to finish.
Dragos Tatulea [Fri, 30 Aug 2024 10:58:37 +0000 (13:58 +0300)]
vdpa/mlx5: Introduce init/destroy for MR resources
There's currently not a lot of action happening during
the init/destroy of MR resources. But more will be added
in the upcoming patches.
As the mr mutex lock init/destroy has been moved to these
new functions, the lifetime has now shifted away from
mlx5_vdpa_alloc_resources() / mlx5_vdpa_free_resources()
into these new functions. However, the lifetime at the
outer scope remains the same:
mlx5_vdpa_dev_add() / mlx5_vdpa_dev_free()
Dragos Tatulea [Fri, 30 Aug 2024 10:58:32 +0000 (13:58 +0300)]
vdpa/mlx5: Create direct MKEYs in parallel
Use the async interface to issue MTT MKEY creation.
Extra care is taken at the allocation of FW input commands
due to the MTT tables having variable sizes depending on
MR.
The indirect MKEY is still created synchronously at the
end as the direct MKEYs need to be filled in.
This makes create_user_mr() 3-5x faster, depending on
the size of the MR.
MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
The virtio-vsock driver is already under VM SOCKETS (AF_VSOCK),
managed pricipally with the net tree, and VIRTIO AND VHOST
VSOCK DRIVER. However, changes that only affect the virtio part
usually go with Michael's tree, so let's also put the driver in
the VIRTIO CORE section to have its maintainers in CC for changes
to the virtio-vsock driver.
Max Gurtovoy [Sun, 25 Aug 2024 13:07:16 +0000 (16:07 +0300)]
virtio_fs: add sysfs entries for queue information
Introduce sysfs entries to provide visibility to the multiple queues
used by the Virtio FS device. This enhancement allows users to query
information about these queues.
Specifically, add two sysfs entries:
1. Queue name: Provides the name of each queue (e.g. hiprio/requests.8).
2. CPU list: Shows the list of CPUs that can process requests for each
queue.
The CPU list feature is inspired by similar functionality in the block
MQ layer, which provides analogous sysfs entries for block devices.
These new sysfs entries will improve observability and aid in debugging
and performance tuning of Virtio FS devices.
Max Gurtovoy [Sun, 25 Aug 2024 13:07:15 +0000 (16:07 +0300)]
virtio_fs: introduce virtio_fs_put_locked helper
Introduce a new helper function virtio_fs_put_locked to encapsulate the
common pattern of releasing a virtio_fs reference while holding a lock.
The existing virtio_fs_put helper will be used to release a virtio_fs
reference while not holding a lock.
Also add an assertion in case the lock is not taken when it should.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:59 +0000 (12:01 +0300)]
vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
change_num_qps() is still suspending/resuming VQs one by one.
This change switches to parallel suspend/resume.
When increasing the number of queues the flow has changed a bit for
simplicity: the setup_vq() function will always be called before
resume_vqs(). If the VQ is initialized, setup_vq() will exit early. If
the VQ is not initialized, setup_vq() will create it and resume_vqs()
will resume it.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:58 +0000 (12:01 +0300)]
vdpa/mlx5: Small improvement for change_num_qps()
change_num_qps() has a lot of multiplications by 2 to convert
the number of VQ pairs to number of VQs. This patch simplifies
the code by doing the VQP -> VQ count conversion at the beginning
in a variable.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:57 +0000 (12:01 +0300)]
vdpa/mlx5: Keep notifiers during suspend but ignore
Unregistering notifiers is a costly operation. Instead of removing
the notifiers during device suspend and adding them back at resume,
simply ignore the call when the device is suspended.
At resume time call queue_link_work() to make sure that the device state
is propagated in case there were changes.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~13 ms to ~2.5 ms.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:56 +0000 (12:01 +0300)]
vdpa/mlx5: Parallelize device resume
Currently device resume works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device resume.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device resume time is reduced from
~16 ms to ~4.5 ms.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:55 +0000 (12:01 +0300)]
vdpa/mlx5: Parallelize device suspend
Currently device suspend works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device suspend:
1) Suspend all active vqs parallel.
2) Query suspended vqs in parallel.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~37 ms to ~13 ms.
A later patch will remove the link unregister operation which will make
it even faster.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:54 +0000 (12:01 +0300)]
vdpa/mlx5: Use async API for vq modify commands
Switch firmware vq modify command to be issued via the async API to
allow future parallelization. The new refactored function applies the
modify on a range of vqs and waits for their execution to complete.
For now the command is still used in a serial fashion. A later patch
will switch to modifying multiple vqs in parallel.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:53 +0000 (12:01 +0300)]
vdpa/mlx5: Use async API for vq query command
Switch firmware vq query command to be issued via the async API to
allow future parallelization.
For now the command is still serial but the infrastructure is there
to issue commands in parallel, including ratelimiting the number
of issued async commands to firmware.
A later patch will switch to issuing more commands at a time.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:52 +0000 (12:01 +0300)]
vdpa/mlx5: Introduce async fw command wrapper
Introduce a new function mlx5_vdpa_exec_async_cmds() which
wraps the mlx5_core async firmware command API in a way
that will be used to parallelize certain operation in this
driver.
The wrapper deals with the case when mlx5_cmd_exec_cb() returns
EBUSY due to the command being throttled.
Dragos Tatulea [Fri, 16 Aug 2024 09:01:50 +0000 (12:01 +0300)]
net/mlx5: Support throttled commands from async API
Currently, commands that qualify as throttled can't be used via the
async API. That's due to the fact that the throttle semaphore can sleep
but the async API can't.
This patch allows throttling in the async API by using the tentative
variant of the semaphore and upon failure (semaphore at 0) returns EBUSY
to signal to the caller that they need to wait for the completion of
previously issued commands.
Furthermore, make sure that the semaphore is released in the callback.
* tag 'nvme-6.12-2024-09-25' of git://git.infradead.org/nvme:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
Keith Busch [Wed, 4 Sep 2024 21:48:50 +0000 (14:48 -0700)]
nvme: remove CC register read-back during enabling
Any non-posted read should flush the previous write, so we don't
necessarily need to read back the value we just wrote. I've found at
least some controllers that respond with 0 for short moments after
writing the CC register with EN (enable) cleared, so the read-back is
overwriting our valid ctrl_config value and ends up breaking on the
subsequent enabling.
Commit 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a
separate group") introduced the struct attribute array nvme_tls_attrs.
However, the array was not null terminated and caused BUG KASAN global-
out-of-bounds. To avoid the BUG, null terminate the array.
Reported-by: Yi Zhang <[email protected]> Closes: https://lore.kernel.org/linux-nvme/jhllwfxcedrcxcnbajwl4x2l2ujcqowqcd4ps574zrafrqhjna@f4icvecutekm/ Fixes: 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a separate group") Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Tested-by: Yi Zhang <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
Hannes Reinecke [Sat, 14 Sep 2024 12:01:23 +0000 (14:01 +0200)]
nvme-multipath: avoid hang on inaccessible namespaces
During repetitive namespace remapping operations on the target the
namespace might have changed between the time the initial scan
was performed, and partition scan was invoked by device_add_disk()
in nvme_mpath_set_live(). We then end up with a stuck scanning process:
This happens when we have several paths, some of which are inaccessible,
and the active paths are removed first. Then nvme_find_path() will requeue
I/O in the ns_head (as paths are present), but the requeue list is never
triggered as all remaining paths are inactive.
This patch checks for NVME_NSHEAD_DISK_LIVE in nvme_available_path(),
and requeue I/O after NVME_NSHEAD_DISK_LIVE has been cleared once
the last path has been removed to properly terminate pending I/O.
Hannes Reinecke [Sat, 14 Sep 2024 12:01:22 +0000 (14:01 +0200)]
nvme-multipath: system fails to create generic nvme device
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e332 ("nvme-multipath: add error handling support for add_disk()") Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
David Howells [Tue, 17 Sep 2024 07:54:28 +0000 (08:54 +0100)]
netfs, cifs: Fix mtime/ctime update for mmapped writes
The cifs flag CIFS_INO_MODIFIED_ATTR, which indicates that the mtime and
ctime need to be written back on close, got taken over by netfs as
NETFS_ICTX_MODIFIED_ATTR to avoid the need to call a function pointer to
set it.
The flag gets set correctly on buffered writes, but doesn't get set by
netfs_page_mkwrite(), leading to occasional failures in generic/080 and
generic/215.
Fix this by setting the flag in netfs_page_mkwrite().
David Howells [Mon, 23 Sep 2024 15:07:51 +0000 (16:07 +0100)]
cifs: Fix reversion of the iter in cifs_readv_receive().
cifs_read_iter_from_socket() copies the iterator that's passed in for the
socket to modify as and if it will, and then advances the original iterator
by the amount sent. However, both callers revert the advancement (although
receive_encrypted_read() zeros beyond the iterator first). The problem is,
though, that cifs_readv_receive() reverts by the original length, not the
amount transmitted which can cause an oops in iov_iter_revert().
Fix this by:
(1) Remove the iov_iter_advance() from cifs_read_iter_from_socket().
(2) Remove the iov_iter_revert() from both callers. This fixes the bug in
cifs_readv_receive().
(3) In receive_encrypted_read(), if we didn't get back as much data as the
buffer will hold, copy the iterator, advance the copy and use the copy
to drive iov_iter_zero().
As a bonus, this gets rid of some unnecessary work.
This was triggered by generic/074 with the "-o sign" mount option.
Steve French [Sun, 22 Sep 2024 04:28:32 +0000 (23:28 -0500)]
smb3: fix incorrect mode displayed for read-only files
Commands like "chmod 0444" mark a file readonly via the attribute flag
(when mapping of mode bits into the ACL are not set, or POSIX extensions
are not negotiated), but they were not reported correctly for stat of
directories (they were reported ok for files and for "ls"). See example
below:
Paulo Alcantara [Wed, 18 Sep 2024 05:04:23 +0000 (02:04 -0300)]
smb: client: fix DFS failover in multiuser mounts
For sessions and tcons created on behalf of new users accessing a
multiuser mount, matching their sessions in tcon_super_cb() with
master tcon will always lead to false as every new user will have its
own session and tcon.
All multiuser sessions, however, will inherit ->dfs_root_ses from
master tcon, so match it instead.
David Howells [Wed, 18 Sep 2024 19:24:24 +0000 (20:24 +0100)]
cifs: Make the write_{enter,done,err} tracepoints display netfs info
Make the write RPC tracepoints use the same trace macro complexes as the
read tracepoints and display the netfs request and subrequest IDs where
available (see commit 519be989717c "cifs: Add a tracepoint to track credits
involved in R/W requests").
Paulo Alcantara [Wed, 18 Sep 2024 05:03:55 +0000 (02:03 -0300)]
smb: client: fix DFS interlink failover
The DFS interlinks point to different DFS namespaces so make sure to
use the correct DFS root server to chase any DFS links under it by
storing the SMB session in dfs_ref_walk structure and then using it on
every referral walk.
Paulo Alcantara [Wed, 18 Sep 2024 05:03:45 +0000 (02:03 -0300)]
smb: client: improve purging of cached referrals
Purge cached referrals that have a single target when reaching maximum
of cache size as the client won't need them to failover. Otherwise
remove oldest cache entry.
Merge tag 'nfs-for-6.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add a 'noalignwrite' mount option for lock-less 'lost writes' prevention
- Add support for the LOCALIO protocol extention
Bugfixes:
- Fix memory leak in error path of nfs4_do_reclaim()
- Simplify and guarantee lock owner uniqueness
- Fix -Wformat-truncation warning
- Fix folio refcounts by using folio_attach_private()
- Fix failing the mount system call when the server is down
- Fix detection of "Proxying of Times" server support
Cleanups:
- Annotate struct nfs_cache_array with __counted_by()
- Remove unnecessary NULL checks before kfree()
- Convert RPC_TASK_* constants to an enum
- Remove obsolete or misleading comments and declerations"
* tag 'nfs-for-6.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (41 commits)
nfs: Fix `make htmldocs` warnings in the localio documentation
nfs: add "NFS Client and Server Interlock" section to localio.rst
nfs: add FAQ section to Documentation/filesystems/nfs/localio.rst
nfs: add Documentation/filesystems/nfs/localio.rst
nfs: implement client support for NFS_LOCALIO_PROGRAM
nfs/localio: use dedicated workqueues for filesystem read and write
pnfs/flexfiles: enable localio support
nfs: enable localio for non-pNFS IO
nfs: add LOCALIO support
nfs: pass struct nfsd_file to nfs_init_pgio and nfs_init_commit
nfsd: implement server support for NFS_LOCALIO_PROGRAM
nfsd: add LOCALIO support
nfs_common: prepare for the NFS client to use nfsd_file for LOCALIO
nfs_common: add NFS LOCALIO auxiliary protocol enablement
SUNRPC: replace program list with program array
SUNRPC: add svcauth_map_clnt_to_svc_cred_local
SUNRPC: remove call_allocate() BUG_ONs
nfsd: add nfsd_serv_try_get and nfsd_serv_put
nfsd: add nfsd_file_acquire_local()
nfsd: factor out __fh_verify to allow NULL rqstp to be passed
...
Merge tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add support for idmapped fuse mounts (Alexander Mikhalitsyn)
- Add optimization when checking for writeback (yangyun)
- Add tracepoints (Josef Bacik)
- Clean up writeback code (Joanne Koong)
- Clean up request queuing (me)
- Misc fixes
* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
fuse: clear FR_PENDING if abort is detected when sending request
fs/fuse: convert to use invalid_mnt_idmap
fs/mnt_idmapping: introduce an invalid_mnt_idmap
fs/fuse: introduce and use fuse_simple_idmap_request() helper
fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
virtio_fs: allow idmapped mounts
fuse: allow idmapped mounts
fuse: warn if fuse_access is called when idmapped mounts are allowed
fuse: handle idmappings properly in ->write_iter()
fuse: support idmapped ->rename op
fuse: support idmapped ->set_acl
fuse: drop idmap argument from __fuse_get_acl
fuse: support idmapped ->setattr op
fuse: support idmapped ->permission inode op
fuse: support idmapped getattr inode op
fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
fuse: support idmapped FUSE_EXT_GROUPS
fuse: add an idmap argument to fuse_simple_request
...
Merge tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Clean-up unnecessary codes as ->valid_size is supported
- buffered-IO fallback is no longer needed when using direct-IO
- Move ->valid_size extension from mmap to ->page_mkwrite. This
improves the overhead caused by unnecessary zero-out during mmap.
- Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table()
- Add sops->shutdown and ioctl
- Add Yuezhang Mo as a reviwer
* tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
MAINTAINERS: exfat: add myself as reviewer
exfat: resolve memory leak from exfat_create_upcase_table()
exfat: move extend valid_size into ->page_mkwrite()
exfat: fix memory leak in exfat_load_bitmap()
exfat: Implement sops->shutdown and ioctl
exfat: do not fallback to buffered write
exfat: drop ->i_size_ondisk
Merge tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"The main changes include converting major IO paths to use folio, and
adding various knobs to control GC more flexibly for Zoned devices.
In addition, there are several patches to address corner cases of
atomic file operations and better support for file pinning on zoned
device.
Enhancement:
- add knobs to tune foreground/background GCs for Zoned devices
- convert IO paths to use folio
- reduce expensive checkpoint trigger frequency
- allow F2FS_IPU_NOCACHE for pinned file
- forcibly migrate to secure space for zoned device file pinning
- get rid of buffer_head use
- add write priority option based on zone UFS
- get rid of online repair on corrupted directory
Bug fixes:
- fix to don't panic system for no free segment fault injection
- fix to don't set SB_RDONLY in f2fs_handle_critical_error()
- avoid unused block when dio write in LFS mode
- compress: don't redirty sparse cluster during {,de}compress
- check discard support for conventional zones
- atomic: prevent atomic file from being dirtied before commit
- atomic: fix to check atomic_file in f2fs ioctl interfaces
- atomic: fix to forbid dio in atomic_file
- atomic: fix to truncate pagecache before on-disk metadata truncation
- atomic: create COW inode from parent dentry
- atomic: fix to avoid racing w/ GC
- atomic: require FMODE_WRITE for atomic write ioctls
- fix to wait page writeback before setting gcing flag
- fix to avoid racing in between read and OPU dio write, dio completion
- fix several potential integer overflows in file offsets and dir_block_index
- fix to avoid use-after-free in f2fs_stop_gc_thread()
As usual, there are several code clean-ups and refactorings"
* tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
f2fs: allow F2FS_IPU_NOCACHE for pinned file
f2fs: forcibly migrate to secure space for zoned device file pinning
f2fs: remove unused parameters
f2fs: fix to don't panic system for no free segment fault injection
f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
f2fs: add valid block ratio not to do excessive GC for one time GC
f2fs: create gc_no_zoned_gc_percent and gc_boost_zoned_gc_percent
f2fs: do FG_GC when GC boosting is required for zoned devices
f2fs: increase BG GC migration window granularity when boosted for zoned devices
f2fs: add reserved_segments sysfs node
f2fs: introduce migration_window_granularity
f2fs: make BG GC more aggressive for zoned devices
f2fs: avoid unused block when dio write in LFS mode
f2fs: fix to check atomic_file in f2fs ioctl interfaces
f2fs: get rid of online repaire on corrupted directory
f2fs: prevent atomic file from being dirtied before commit
f2fs: get rid of page->index
f2fs: convert read_node_page() to use folio
f2fs: convert __write_node_page() to use folio
f2fs: convert f2fs_write_data_page() to use folio
...
Merge tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf 'struct fd' updates from Alexei Starovoitov:
"This includes struct_fd BPF changes from Al and Andrii"
* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: convert bpf_token_create() to CLASS(fd, ...)
security,bpf: constify struct path in bpf_token_create() LSM hook
bpf: more trivial fdget() conversions
bpf: trivial conversions for fdget()
bpf: switch maps to CLASS(fd, ...)
bpf: factor out fetching bpf_map from FD and adding it to used_maps list
bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
bpf: convert __bpf_prog_get() to CLASS(fd, ...)
Merge tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: doc: replace "gcc" in external module description
kbuild: doc: describe the -C option precisely for external module builds
kbuild: doc: remove the description about shipped files
kbuild: doc: drop section numbering, use references in modules.rst
kbuild: doc: throw out the local table of contents in modules.rst
kbuild: doc: remove outdated description of the limitation on -I usage
kbuild: doc: remove description about grepping CONFIG options
kbuild: doc: update the description about Kbuild/Makefile split
kbuild: remove unnecessary export of RUST_LIB_SRC
kbuild: remove append operation on cmd_ld_ko_o
kconfig: cache expression values
kconfig: use hash table to reuse expressions
kconfig: refactor expr_eliminate_dups()
kconfig: add comments to expression transformations
kconfig: change some expr_*() functions to bool
scripts: move hash function from scripts/kconfig/ to scripts/include/
kallsyms: change overflow variable to bool type
kallsyms: squash output_address()
kbuild: add install target for modules.builtin.ranges
scripts: add verifier script for builtin module range data
...
Merge tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower updates from Shuah Khan
"The 'raw_pylibcpupower.i' file was being removed by "make mrproper".
That was because '*.i', '.s' and '*.o' files are generated during
kernel compile and removed when the repo is cleaned by mrproper.
Rename it to use .swg extension instead to avoid the problem.
A second patch removes references to it from .gitignore"
* tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
pm: cpupower: Clean up bindings gitignore
pm: cpupower: rename raw_pylibcpupower.i
Merge tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This adds support for the I3C HCI controller of the AMD SoC which as
expected requires quirks. Also fixes for the other drivers, including
rate selection fixes for svc.
Core:
- allow adjusting first broadcast address speed
Drivers:
- cdns: few fixes
- mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
get_i3c_mode
- svc: adjust rates, fix race condition"
* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
i3c: master: svc: adjust SDR according to i3c spec
i3c: master: svc: use slow speed for first broadcast address
i3c: master: support to adjust first broadcast address speed
i3c/master: cmd_v1: Fix the rule for getting i3c mode
i3c: master: cdns: fix module autoloading
i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
i3c: mipi-i3c-hci: Add a quirk to set timing parameters
i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
i3c: mipi-i3c-hci: Add a quirk to set PIO mode
i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
Merge tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock update from Bjorn Andersson:
"This converts the Spreadtrum hardware spinlock DeviceTree binding to
YAML, to allow validation of related DeviceTree source"
* tag 'hwlock-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
Merge tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Minor cleanup/refactor to the Qualcomm GLINK code, in order to add
trace events related to the messages exchange with the remote side,
useful for debugging a range of interoperability issues
- Rewrite the nested structs with flexible array members in order to
avoid the risk of invalid accesses
* tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
rpmsg: glink: Introduce packet tracepoints
rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
rpmsg: glink: Tidy up RX advance handling
Merge tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add remoteproc support for the Cortex M4F found in AM62x and AM64x of
the TI K3 family, support for the modem remoteproc in the Qualcomm
SDX75, and audio, compute and general-purpose DSPs of the Qualcomm
SA8775P.
- Add support for blocking and non-blocking mailbox transmissions to
the i.MX remoteproc driver, and implement poweroff and reboot
mechanisms using them. Plus a few bug fixes and minor improvements.
- Cleanups and bug fixes for the TI K3 DSP and R5F drivers
- Support mapping SRAM regions into the AMD-Xilinx Zynqmp R5 cores
- Use devres helpers for various allocations in the Ingenic, TI DA8xx,
TI Keystone, TI K3, ST slim drivers
- Replace uses of of_{find,get}_property() with of_property_present()
where possible
* tag 'rproc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteporc: ingenic: Use devm_platform_ioremap_resource_byname()
remoteproc: da8xx: Use devm_platform_ioremap_resource_byname()
remoteproc: st_slim: Use devm_platform_ioremap_resource_byname()
remoteproc: xlnx: Add sram support
remoteproc: k3-r5: Fix error handling when power-up failed
remoteproc: imx_rproc: Add support for poweroff and reboot
remoteproc: imx_rproc: Allow setting of the mailbox transmit mode
remoteproc: k3-r5: Delay notification of wakeup event
remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
remoteproc: k3: Factor out TI-SCI processor control OF get function
dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
remoteproc: k3-dsp: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Acquire mailbox handle during probe routine
remoteproc: k3-r5: Use devm_rproc_alloc() helper
remoteproc: qcom: pas: Add support for SA8775p ADSP, CDSP and GPDSP
remoteproc: qcom: pas: Add SDX75 remoteproc support
dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
remoteproc: keystone: Use devm_rproc_alloc() helper
remoteproc: keystone: Use devm_kasprintf() to build name string
dt-bindings: remoteproc: xlnx,zynqmp-r5fss: Add missing "additionalProperties" on child nodes
...
Merge tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
"Just a few cleanups this cycle:
- Remove several unused structure and function declarations, and
unused variables (Dr. David Alan Gilbert, Yue Haibing, Zhang Zekun)
- Constify unmodified structure in mdev (Hongbo Li)
- Convert to unsigned type to catch overflow with less fanfare than
passing a negative value to kcalloc() (Dan Carpenter)"
* tag 'vfio-v6.12-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: clean up a type in vfio_pci_ioctl_pci_hot_reset_groups()
vfio/mdev: Constify struct kobj_type
vfio: mdev: Remove unused function declarations
vfio/fsl-mc: Remove unused variable 'hwirq'
vfio/pci: Remove unused struct 'vfio_pci_mmap_vma'
Merge tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- sort out a few issues with the direct calls to iommu-dma (Christoph
Hellwig, Leon Romanovsky)
* tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: report unlimited DMA addressing in IOMMU DMA path
iommu/dma: remove most stubs in iommu-dma.h
dma-mapping: fix vmap and mmap of noncontiougs allocations
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Collection of small cleanup and one fix:
- Sort headers and struct forward declarations
- Fix random selftest failures in some cases due to dirty tracking
tests
- Have the reserved IOVA regions mechanism work when a HWPT is used
as a nesting parent. This updates the nesting parent's IOAS with
the reserved regions of the device and will also install the ITS
doorbell page on ARM.
- Add missed validation of parent domain ops against the current
iommu
- Fix a syzkaller bug related to integer overflow during ALIGN()
- Tidy two iommu_domain attach paths"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Set iommu_attach_handle->domain in core
iommufd: Avoid duplicated __iommu_group_set_core_domain() call
iommufd: Protect against overflow of ALIGN() during iova allocation
iommufd: Reorder struct forward declarations
iommufd: Check the domain owner of the parent before creating a nesting domain
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
iommufd/selftest: Fix buffer read overrrun in the dirty test
iommufd: Reorder include files
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
Merge tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Three build fixes
- The fix for a stall bug introduced by a recent optimization in sched
core (SM_IDLE)
- Addition of /sys/kernel/sched_ext/enable_seq. While not a fix, it is
a simple addition that distro people want to be able to tell whether
an SCX scheduler has ever been loaded on the system
* tag 'sched_ext-for-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Provide a sysfs enable_seq counter
sched_ext: Fix build when !CONFIG_STACKTRACE
sched, sched_ext: Disable SM_IDLE/rq empty path when scx_enabled()
sched: Put task_group::idle under CONFIG_GROUP_SCHED_WEIGHT
sched: Add dummy version of sched_group_set_idle()
Merge tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Mostly just a set of fixes in here, or little changes that didn't get
included in the initial pull request. This contains:
- Move the SQPOLL napi polling outside the submission lock (Olivier)
- Rename of the "copy buffers" API that got added in the 6.12 merge
window. There's really no copying going on, it's just referencing
the buffers. After a bit of consideration, decided that it was
better to simply rename this to avoid potential confusion (me)
- Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
start + len tracking rather than having start / end in there, and
by removing the caching of folio_mask when we can just calculate it
from folio_shift when we need it (me)
- Fixes for the SQPOLL affinity checking (me, Felix)
- Fix for how cqring waiting checks for the presence of task_work.
Just check it directly rather than check for a specific
notification mechanism (me)
- Tweak to how request linking is represented in tracing (me)
- Fix a syzbot report that deliberately sets up a huge list of
overflow entries, and then hits rcu stalls when flushing this list.
Just check for the need to preempt, and drop/reacquire locks in the
loop. There's no state maintained over the loop itself, and each
entry is yanked from head-of-list (me)"
* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
io_uring: check if we need to reschedule during overflow flush
io_uring: improve request linking trace
io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
io_uring/sqpoll: do the napi busy poll outside the submission block
io_uring: clean up a type in io_uring_register_get_file()
io_uring/sqpoll: do not put cpumask on stack
io_uring/sqpoll: retain test for whether the CPU is valid
io_uring/rsrc: change ubuf->ubuf_end to length tracking
io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
io_uring: rename "copy buffers" to "clone buffers"
Merge tag 'sysctl-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl update from Joel Granados:
- Avoid evaluating non-mount ctl_tables as a sysctl_mount_point by
removing the unlikely (but possible) chance that the permanently
empty ctl_table array shares its address with another ctl_table
- Update Joel Granados' contact info in MAINTAINERS
* tag 'sysctl-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
MAINTAINERS: update email for Joel Granados
sysctl: avoid spurious permanent empty tables
Merge tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support using Zkr to seed KASLR
- Support IPI-triggered CPU backtracing
- Support for generic CPU vulnerabilities reporting to userspace
- A few cleanups for missing licenses
- The size limit on the XIP kernel has been removed
- Support for tracing userspace stacks
- Support for the Svvptc extension
- Various cleanups and fixes throughout the tree
* tag 'riscv-for-linus-6.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (47 commits)
crash: Fix riscv64 crash memory reserve dead loop
perf/riscv-sbi: Add platform specific firmware event handling
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
RISC-V: Don't have MAX_PHYSMEM_BITS exceed phys_addr_t
ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
riscv: Enable bitops instrumentation
riscv: Omit optimized string routines when using KASAN
ACPI: RISCV: Make acpi_numa_get_nid() to be static
riscv: Randomize lower bits of stack address
selftests: riscv: Allow mmap test to compile on 32-bit
riscv: Make riscv_isa_vendor_ext_andes array static
riscv: Use LIST_HEAD() to simplify code
riscv: defconfig: Disable RZ/Five peripheral support
RISC-V: Implement kgdb_roundup_cpus() to enable future NMI Roundup
riscv: avoid Imbalance in RAS
riscv: cacheinfo: Add back init_cache_level() function
riscv: Remove unused _TIF_WORK_MASK
drivers/perf: riscv: Remove redundant macro check
riscv: define ILLEGAL_POINTER_VALUE for 64bit
...
Merge tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"We can now scope a Landlock domain thanks to a new "scoped" field that
can deny interactions with resources outside of this domain.
The LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET flag denies connections to an
abstract UNIX socket created outside of the current scoped domain, and
the LANDLOCK_SCOPE_SIGNAL flag denies sending a signal to processes
outside of the current scoped domain.
These restrictions also apply to nested domains according to their
scope. The related changes will also be useful to support other kind
of IPC isolations"
* tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Document LANDLOCK_SCOPE_SIGNAL
samples/landlock: Add support for signal scoping
selftests/landlock: Test signal created by out-of-bound message
selftests/landlock: Test signal scoping for threads
selftests/landlock: Test signal scoping
landlock: Add signal scoping
landlock: Document LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET
samples/landlock: Add support for abstract UNIX socket scoping
selftests/landlock: Test inherited restriction of abstract UNIX socket
selftests/landlock: Test connected and unconnected datagram UNIX socket
selftests/landlock: Test UNIX sockets with any address formats
selftests/landlock: Test abstract UNIX socket scoping
selftests/landlock: Test handling of unknown scope
landlock: Add abstract UNIX socket scoping
Merge tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull key updates from Jarkko Sakkinen:
"The bulk of this is OpenSSL 3.0 compatibility fixes for the signing
and certificates"
* tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
sign-file,extract-cert: use pkcs11 provider for OPENSSL MAJOR >= 3
sign-file,extract-cert: avoid using deprecated ERR_get_error_line()
sign-file,extract-cert: move common SSL helper functions to a header
KEYS: prevent NULL pointer dereference in find_asymmetric_key()
KEYS: Remove unused declarations
Merge tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM fixes from Paul Moore:
- Add a missing security_mmap_file() check to the remap_file_pages()
syscall
- Properly reference the SELinux and Smack LSM blobs in the
security_watch_key() LSM hook
- Fix a random IPE selftest crash caused by a missing list terminator
in the test
* tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ipe: Add missing terminator to list of unit tests
selinux,smack: properly reference the LSM blob in security_watch_key()
mm: call the security_mmap_file() LSM hook in remap_file_pages()
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
This may be a typo. The comment has said shared locks are
not allowed when this bit is set. If using shared lock, the
wait in `fuse_file_cached_io_open` may be forever.
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
Merge tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
- use Open Firmware helper routines
- fix memory leak when nvdimm labels are incorrect
- remove some dead code
* tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Remove dead code for ENODEV checking in scan_labels()
nvdimm: Fix devs leaks in scan_labels()
nvdimm: Use of_property_present() and of_property_read_bool()
projects / linux.git / log