2) RXRPC/AFS bug fixes from David Howells (oops on call to serviceless
endpoints, build warnings, missing notifications, etc.) From David
Howells.
3) Kernel log message missing newlines, from Colin Ian King.
4) Don't enter direct reclaim in netlink dumps, the idea is to use a
high order allocation first and fallback quickly to a 0-order
allocation if such a high-order one cannot be done cheaply and
without reclaim. From Eric Dumazet.
5) Fix firmware download errors in btusb bluetooth driver, from Ethan
Hsieh.
6) Missing Kconfig deps for QCOM_EMAC, from Geert Uytterhoeven.
7) Fix MDIO_XGENE dup Kconfig entry. From Laura Abbott.
8) Constrain ipv6 rtr_solicits sysctl values properly, from Maciej
Żenczykowski.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
netfilter: Fix slab corruption.
be2net: Enable VF link state setting for BE3
be2net: Fix TX stats for TSO packets
be2net: Update Copyright string in be_hw.h
be2net: NCSI FW section should be properly updated with ethtool for BE3
be2net: Provide an alternate way to read pf_num for BEx chips
wan/fsl_ucc_hdlc: Fix size used in dma_free_coherent()
net: macb: NULL out phydev after removing mdio bus
xen-netback: make sure that hashes are not send to unaware frontends
Fixing a bug in team driver due to incorrect 'unsigned int' to 'int' conversion
MAINTAINERS: add myself as a maintainer of xen-netback
ipv6 addrconf: disallow rtr_solicits < -1
Bluetooth: btusb: Fix atheros firmware download error
drivers: net: phy: Correct duplicate MDIO_XGENE entry
ethernet: qualcomm: QCOM_EMAC should depend on HAS_DMA and HAS_IOMEM
net: ethernet: mediatek: remove hwlro property in the device tree
net: ethernet: mediatek: get hw lro capability by the chip id instead of by the dtsi
net: ethernet: mediatek: get the chip id by ETHDMASYS registers
net: bgmac: Fix errant feature flag check
netlink: do not enter direct reclaim from netlink_dump()
...
Bjorn Helgaas [Thu, 6 Oct 2016 18:42:09 +0000 (13:42 -0500)]
PCI: spear: Clean up struct device usage
For consistency with other drivers, use the struct device pointer from
struct pcie_port whenever possible instead of relying on the
platform_device pointer. No functional change intended.
Bjorn Helgaas [Thu, 6 Oct 2016 18:42:08 +0000 (13:42 -0500)]
PCI: spear: Pass device-specific struct to internal functions
Only interfaces used from outside the driver, e.g., those called by the
DesignWare core, need to accept pointers to the generic struct pcie_port.
Internal interfaces can accept pointers to the device-specific struct,
which makes them more straightforward. No functional change intended.
SeongJae Park [Sun, 2 Oct 2016 02:02:18 +0000 (11:02 +0900)]
selftests/futex: Check ANSI terminal color support
Because test for color support of the running shell does not aware ANSI
type terminals, it does not print colorful messages on some environemnt.
This commit modifies the test to aware ANSI type terminal, too.
Bjorn Helgaas [Tue, 11 Oct 2016 13:33:00 +0000 (08:33 -0500)]
PCI: designware: Swap order of dw_pcie_writel_unroll() reg/val arguments
Swap order of dw_pcie_readl_unroll() arguments to match the "dev, pos, val"
order used by pci_write_config_word() and other drivers. No functional
change intended.
Export dw_pcie_readl_rc() and dw_pcie_writel_rc(). Many other drivers can
use these instead of implementing their own versions. No functional change
intended.
Bjorn Helgaas [Thu, 6 Oct 2016 18:25:46 +0000 (13:25 -0500)]
PCI: designware: Swap order of dw_pcie_writel_rc() reg/val arguments
Swap order of dw_pcie_writel_rc() arguments to match the "dev, pos, val"
order used by pci_write_config_word() and other drivers. No functional
change intended.
Bjorn Helgaas [Thu, 6 Oct 2016 18:25:46 +0000 (13:25 -0500)]
PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfaces
The struct pcie_host_ops.readl_rc() and .writel_rc() function pointers
allow a driver to override the default DesignWare register accessors.
Make the signature of the override functions the same as the default
accessors. This makes the default dw_pcie_readl_rc() and the corresponding
override more structurally similar: both will compute the final register
address with "pp->dbi_base + reg". Previously dw_pcie_readl_rc() computed
the address and passed it to the override.
James Hogan [Fri, 7 Oct 2016 09:23:46 +0000 (10:23 +0100)]
MIPS: VDSO: Drop duplicated -I*/-E* aflags
The aflags-vdso is based on ccflags-vdso, which already contains the -I*
and -EL/-EB flags from KBUILD_CFLAGS, but those flags are needlessly
added again to aflags-vdso.
James Hogan [Thu, 6 Oct 2016 22:10:41 +0000 (23:10 +0100)]
MIPS: Fix -mabi=64 build of vdso.lds
The native ABI vDSO linker script vdso.lds is built by preprocessing
vdso.lds.S, with the native -mabi flag passed in to get the correct ABI
definitions. Unfortunately however certain toolchains choke on -mabi=64
without a corresponding compatible -march flag, for example:
cc1: error: ‘-march=mips32r2’ is not compatible with the selected ABI
scripts/Makefile.build:338: recipe for target 'arch/mips/vdso/vdso.lds' failed
Fix this by including ccflags-vdso in the KBUILD_CPPFLAGS for vdso.lds,
which includes the appropriate -march flag.
Nicholas Piggin [Tue, 11 Oct 2016 07:47:56 +0000 (18:47 +1100)]
powerpc/64s: Fix power4_fixup_nap placement
power4_fixup_nap is called from the "common" handlers, not the virt/real
handlers, therefore it should itself be a common handler. Placing it
down in the trampoline space caused it to go out of reach of its
callers, requiring a trampoline inserted at the start of the text
section, which breaks the fixed section address calculations.
Fixes: da2bc4644c75 ("powerpc/64s: Add new exception vector macros") Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Laurent Dufour [Thu, 6 Oct 2016 13:33:21 +0000 (15:33 +0200)]
powerpc/pseries: Fix stack corruption in htpe code
This commit fixes a stack corruption in the pseries specific code dealing
with the huge pages.
In __pSeries_lpar_hugepage_invalidate() the buffer used to pass arguments
to the hypervisor is not large enough. This leads to a stack corruption
where a previously saved register could be corrupted leading to unexpected
result in the caller, like the following panic:
Most of the time, the bug is surfacing in a caller up in the stack from
__pSeries_lpar_hugepage_invalidate() which is quite confusing.
This bug is pending since v3.11 but was hidden if a caller of the
caller of __pSeries_lpar_hugepage_invalidate() has pushed the corruped
register (r18 in this case) in the stack and is not using it until
restoring it. GCC 6.2.0 seems to raise it more frequently.
This commit also change the definition of the parameter buffer in
pSeries_lpar_flush_hash_range() to rely on the global define
PLPAR_HCALL9_BUFSIZE (no functional change here).
Michael Ellerman [Tue, 11 Oct 2016 09:07:56 +0000 (20:07 +1100)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next
Freescale updates from Scott:
"Highlights include qbman support (a prerequisite for datapath drivers
such as ethernet), a PCI DMA fix+improvement, reset handler changes, more
8xx optimizations, and some cleanups and fixes."
Report code constructs where the if and else branch are functionally
identical. In cases where this is intended it really should be
documented - most reported cases probably are bugs.
Markus Elfring [Fri, 7 Oct 2016 14:06:15 +0000 (16:06 +0200)]
scripts/coccicheck: Update reference for the corresponding documentation
Use the current name (in a comment at the beginning of this script) for
the file which was converted to the documentation format "reStructuredText"
in August 2016.
Fixes: 4b9033a33494 ("docs: sphinxify coccinelle.txt and add it to dev-tools") Signed-off-by: Markus Elfring <[email protected]> Acked-by: Julia Lawall <[email protected]> Signed-off-by: Michal Marek <[email protected]>
Linus Torvalds [Tue, 11 Oct 2016 03:16:43 +0000 (20:16 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Linus Torvalds [Tue, 11 Oct 2016 00:39:51 +0000 (17:39 -0700)]
Merge tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"I've not been very active this cycle, so these are mostly from Boris,
for the NAND flash subsystem.
NAND:
- Add the infrastructure to automate NAND timings configuration
- Provide a generic DT property to maximize ECC strength
- Some refactoring in the core bad block table handling, to help with
improving some of the logic in error cases.
- Minor cleanups and fixes
MTD:
- Add APIs for handling page pairing; this is necessary for reliably
supporting MLC and TLC NAND flash, where paired-page disturbance
affects reliability. Upper layers (e.g., UBI) should make use of
these in the near future"
* tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd: (35 commits)
mtd: nand: fix trivial spelling error
mtdpart: Propagate _get/put_device()
mtd: nand: Provide nand_cleanup() function to free NAND related resources
mtd: Kill the OF_MTD Kconfig option
mtd: nand: mxc: Test CONFIG_OF instead of CONFIG_OF_MTD
mtd: nand: Fix nand_command_lp() for 8bits opcodes
mtd: nand: sunxi: Support ECC maximization
mtd: nand: Support maximizing ECC when using software BCH
mtd: nand: Add an option to maximize the ECC strength
mtd: nand: mxc: Add timing setup for v2 controllers
mtd: nand: mxc: implement onfi get/set features
mtd: nand: sunxi: switch from manual to automated timing config
mtd: nand: automate NAND timings selection
mtd: nand: Expose data interface for ONFI mode 0
mtd: nand: Add function to convert ONFI mode to data_interface
mtd: nand: convert ONFI mode into data interface
mtd: nand: Introduce nand_data_interface
mtd: nand: Create a NAND reset function
mtd: nand: remove unnecessary 'extern' from function declarations
MAINTAINERS: Add maintainer entry for Ingenic JZ4780 NAND driver
...
Linus Torvalds [Tue, 11 Oct 2016 00:11:50 +0000 (17:11 -0700)]
Merge branch 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
xfs: convert COW blocks to real blocks before unwritten extent conversion
We need to splice COW blocks we've completed in xfs_end_io_direct_write
into the data fork before converting unwritten extents. Otherwise
xfs_bmapi_write might first allocate blocks for any holes in the data
fork, which isn't only not needed but also harmful as it might cause
reserved block underruns in the transaction.
PM / devfreq: Skip status update on uninitialized previous_freq
In case devfreq->previous_freq is still uninitialized in
devfreq_update_status(), i.e. it has value '0', the lookups in
that function fail, eventually leading to some error message:
[ 3.041292] devfreq bus_dmc: Couldn't update frequency transition information.
Emese Revfy [Mon, 20 Jun 2016 18:42:34 +0000 (20:42 +0200)]
latent_entropy: Mark functions with __latent_entropy
The __latent_entropy gcc attribute can be used only on functions and
variables. If it is on a function then the plugin will instrument it for
gathering control-flow entropy. If the attribute is on a variable then
the plugin will initialize it with random contents. The variable must
be an integer, an integer array type or a structure with integer fields.
These specific functions have been selected because they are init
functions (to help gather boot-time entropy), are called at unpredictable
times, or they have variable loops, each of which provide some level of
latent entropy.
Emese Revfy [Mon, 20 Jun 2016 18:41:19 +0000 (20:41 +0200)]
gcc-plugins: Add latent_entropy plugin
This adds a new gcc plugin named "latent_entropy". It is designed to
extract as much possible uncertainty from a running system at boot time as
possible, hoping to capitalize on any possible variation in CPU operation
(due to runtime data differences, hardware differences, SMP ordering,
thermal timing variation, cache behavior, etc).
At the very least, this plugin is a much more comprehensive example for
how to manipulate kernel code using the gcc plugin internals.
The need for very-early boot entropy tends to be very architecture or
system design specific, so this plugin is more suited for those sorts
of special cases. The existing kernel RNG already attempts to extract
entropy from reliable runtime variation, but this plugin takes the idea to
a logical extreme by permuting a global variable based on any variation
in code execution (e.g. a different value (and permutation function)
is used to permute the global based on loop count, case statement,
if/then/else branching, etc).
To do this, the plugin starts by inserting a local variable in every
marked function. The plugin then adds logic so that the value of this
variable is modified by randomly chosen operations (add, xor and rol) and
random values (gcc generates separate static values for each location at
compile time and also injects the stack pointer at runtime). The resulting
value depends on the control flow path (e.g., loops and branches taken).
Before the function returns, the plugin mixes this local variable into
the latent_entropy global variable. The value of this global variable
is added to the kernel entropy pool in do_one_initcall() and _do_fork(),
though it does not credit any bytes of entropy to the pool; the contents
of the global are just used to mix the pool.
Additionally, the plugin can pre-initialize arrays with build-time
random contents, so that two different kernel builds running on identical
hardware will not have the same starting values.
The ARM64 architecture defines ARM64 specific ACPI bindings to
configure and set-up arch specific components. To simplify
code reviews/updates and streamline the maintainership structure
supporting the arch specific code, a new arm64 directory was created in
/drivers/acpi, to contain ACPI code that is specific to ARM64
architecture.
Add the ARM64-specific ACPI maintainers entry in MAINTAINERS for
the newly created subdirectory and respective code content.
Lorenzo Pieralisi will be in charge of submitting and managing
the pull requests on behalf of all maintainers listed.
Linus Torvalds [Mon, 10 Oct 2016 21:04:16 +0000 (14:04 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.9:
API:
- The crypto engine code now supports hashes.
Algorithms:
- Allow keys >= 2048 bits in FIPS mode for RSA.
Drivers:
- Memory overwrite fix for vmx ghash.
- Add support for building ARM sha1-neon in Thumb2 mode.
- Reenable ARM ghash-ce code by adding import/export.
- Reenable img-hash by adding import/export.
- Add support for multiple cores in omap-aes.
- Add little-endian support for sha1-powerpc.
- Add Cavium HWRNG driver for ThunderX SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
crypto: caam - treat SGT address pointer as u64
crypto: ccp - Make syslog errors human-readable
crypto: ccp - clean up data structure
crypto: vmx - Ensure ghash-generic is enabled
crypto: testmgr - add guard to dst buffer for ahash_export
crypto: caam - Unmap region obtained by of_iomap
crypto: sha1-powerpc - little-endian support
crypto: gcm - Fix IV buffer size in crypto_gcm_setkey
crypto: vmx - Fix memory corruption caused by p8_ghash
crypto: ghash-generic - move common definitions to a new header file
crypto: caam - fix sg dump
hwrng: omap - Only fail if pm_runtime_get_sync returns < 0
crypto: omap-sham - shrink the internal buffer size
crypto: omap-sham - add support for export/import
crypto: omap-sham - convert driver logic to use sgs for data xmit
crypto: omap-sham - change the DMA threshold value to a define
crypto: omap-sham - add support functions for sg based data handling
crypto: omap-sham - rename sgl to sgl_tmp for deprecation
crypto: omap-sham - align algorithms on word offset
crypto: omap-sham - add context export/import stubs
...
Linus Torvalds [Mon, 10 Oct 2016 20:58:06 +0000 (13:58 -0700)]
Merge tag 'dlm-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm fix from David Teigland:
"This includes a bug fix for a bad memory access during workqueue
cleanup, which can happen while shutting down the dlm networking
layer"
* tag 'dlm-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: free workqueues after the connections
Linus Torvalds [Mon, 10 Oct 2016 20:52:05 +0000 (13:52 -0700)]
Merge tag 'ceph-for-4.9-rc1' of git://github.com/ceph/ceph-client
Pull Ceph updates from Ilya Dryomov:
"The big ticket item here is support for rbd exclusive-lock feature,
with maintenance operations offloaded to userspace (Douglas Fuller,
Mike Christie and myself). Another block device bullet is a series
fixing up layering error paths (myself).
On the filesystem side, we've got patches that improve our handling of
buffered vs dio write races (Neil Brown) and a few assorted fixes from
Zheng. Also included a couple of random cleanups and a minor CRUSH
update"
* tag 'ceph-for-4.9-rc1' of git://github.com/ceph/ceph-client: (39 commits)
crush: remove redundant local variable
crush: don't normalize input of crush_ln iteratively
libceph: ceph_build_auth() doesn't need ceph_auth_build_hello()
libceph: use CEPH_AUTH_UNKNOWN in ceph_auth_build_hello()
ceph: fix description for rsize and rasize mount options
rbd: use kmalloc_array() in rbd_header_from_disk()
ceph: use list_move instead of list_del/list_add
ceph: handle CEPH_SESSION_REJECT message
ceph: avoid accessing / when mounting a subpath
ceph: fix mandatory flock check
ceph: remove warning when ceph_releasepage() is called on dirty page
ceph: ignore error from invalidate_inode_pages2_range() in direct write
ceph: fix error handling of start_read()
rbd: add rbd_obj_request_error() helper
rbd: img_data requests don't own their page array
rbd: don't call rbd_osd_req_format_read() for !img_data requests
rbd: rework rbd_img_obj_exists_submit() error paths
rbd: don't crash or leak on errors in rbd_img_obj_parent_read_full_callback()
rbd: move bumping img_request refcount into rbd_obj_request_submit()
rbd: mark the original request as done if stat request fails
...
Linus Torvalds [Mon, 10 Oct 2016 20:38:49 +0000 (13:38 -0700)]
Merge branch 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull splice fixups from Al Viro:
"A couple of fixups for interaction of pipe-backed iov_iter with
O_DIRECT reads + constification of a couple of primitives in uio.h
missed by previous rounds.
Kudos to davej - his fuzzing has caught those bugs"
* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[btrfs] fix check_direct_IO() for non-iovec iterators
constify iov_iter_count() and iter_is_iovec()
fix ITER_PIPE interaction with direct_IO
Linus Torvalds [Mon, 10 Oct 2016 20:04:49 +0000 (13:04 -0700)]
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
Linus Torvalds [Mon, 10 Oct 2016 18:34:28 +0000 (11:34 -0700)]
Merge branch 'pcmcia' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM pcmcia updates from Russell King:
"These updates lay the foundations for more generic soc_common PCMCIA
support, which will result in several of the board specific drivers
being elimated.
As the dependencies for this are complex, the preliminary work is
being submitted now, with the remainder scheduled for the next merge
window"
* 'pcmcia' of git://git.armlinux.org.uk/~rmk/linux-arm:
pcmcia: soc_common: add driver-data pointer
pcmcia: soc_common: add support for voltage sense GPIOs
pcmcia: soc_common: constify pcmcia_low_level ops pointer
pcmcia: soc_common: switch to a per-socket cpufreq notifier
pcmcia: soc_common: add support for Vcc and Vpp regulators
pcmcia: soc_common: add CF socket state helper
pcmcia: soc_common: restore previous socket state on error
pcmcia: soc_common: add support for reset and bus enable GPIOs
pcmcia: soc_common: request legacy detect GPIO with active low
pcmcia: soc_common: ignore invalid interrupts
pcmcia: soc_common: switch to using gpio_descs
pcmcia: soc_common: use devm_gpio_request_one()
Linus Torvalds [Mon, 10 Oct 2016 18:01:51 +0000 (11:01 -0700)]
Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull protection keys syscall interface from Thomas Gleixner:
"This is the final step of Protection Keys support which adds the
syscalls so user space can actually allocate keys and protect memory
areas with them. Details and usage examples can be found in the
documentation.
The mm side of this has been acked by Mel"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Update documentation
x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
x86/pkeys: Fix pkeys build breakage for some non-x86 arches
x86/pkeys: Add self-tests
x86/pkeys: Allow configuration of init_pkru
x86/pkeys: Default to a restrictive init PKRU
pkeys: Add details of system call use to Documentation/
generic syscalls: Wire up memory protection keys syscalls
x86: Wire up protection keys system calls
x86/pkeys: Allocation/free syscalls
x86/pkeys: Make mprotect_key() mask off additional vm_flags
mm: Implement new pkey_mprotect() system call
x86/pkeys: Add fault handling for PF_PK page fault bit
Linus Torvalds [Mon, 10 Oct 2016 17:59:07 +0000 (10:59 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Thomas Gleixner:
"A pile of regression fixes and updates:
- address the fallout of the patches which made the cpuid - nodeid
relation permanent: Handling of invalid APIC ids and preventing
pointless warning messages.
- force eager FPU when protection keys are enabled. Protection keys
are not generating FPU exceptions so they cannot work with the lazy
FPU mechanism.
- prevent force migration of interrupts which are not part of the CPU
vector domain.
- handle the fact that APIC ids are not updated in the ACPI/MADT
tables on physical CPU hotplug
- remove bash-isms from syscall table generator script
- use the hypervisor supplied APIC frequency when running on VMware"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Make protection keys an "eager" feature
x86/apic: Prevent pointless warning messages
x86/acpi: Prevent LAPIC id 0xff from being accounted
arch/x86: Handle non enumerated CPU after physical hotplug
x86/unwind: Fix oprofile module link error
x86/vmware: Skip lapic calibration on VMware
x86/syscalls: Remove bash-isms in syscall table generator
x86/irq: Prevent force migration of irqs which are not in the vector domain
Al Viro [Mon, 10 Oct 2016 17:39:05 +0000 (13:39 -0400)]
[btrfs] fix check_direct_IO() for non-iovec iterators
looking for duplicate ->iov_base makes sense only for
iovec-backed iterators; for kvec-backed ones it's pointless,
for bvec-backed ones it's pointless and broken on 32bit (we
walk through an array of struct bio_vec accessing them as if
they were struct iovec; works by accident on 64bit, but on
32bit it'll blow up) and for pipe-backed ones it's pointless
and ends up oopsing.
Al Viro [Mon, 10 Oct 2016 17:26:27 +0000 (13:26 -0400)]
fix ITER_PIPE interaction with direct_IO
by making sure we call iov_iter_advance() on original
iov_iter even if direct_IO (done on its copy) has returned 0.
It's a no-op for old iov_iter flavours and does the right thing
(== truncation of the stuff we'd allocated, but not filled) in
ITER_PIPE case. Failures (e.g. -EIO) get caught and dealt with
by cleanup in generic_file_read_iter().
Linus Torvalds [Mon, 10 Oct 2016 17:33:58 +0000 (10:33 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling updates from Thomas Gleixner:
- handle uretprobe placement proper on little endian PPC64
- fix buffer handling in libtraceevent
- add a missing pointer derefence in perf probe
- fix the build of host tools in cross builds
- fix Intel PT timestamp handling
- synchronize memcpy, cpufeatures and bpf headers with the kernel headers
- support for vendor supplied JSON files describing PMU events
- a new set of tool tips
- initial work for clang/llvm support
- address some style issues found by cppcheck
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
tools build: Add feature detection for g++
tools build: Support compiling C++ source file
perf top/report: Add tips about a list option
perf report/top: Add a tip about system-wide collection from all CPUs
perf report/top: Add a tip about source line numbers with overhead
tools: Synchronize tools/include/uapi/linux/bpf.h
tools: Synchronize tools/arch/x86/include/asm/cpufeatures.h
perf bench mem: Sync memcpy assembly sources with the kernel
perf jevents: Fix Intel JSON fixed counter conversions
tools lib traceevent: Fix kbuffer_read_at_offset()
perf intel-pt: Fix MTC timestamp calculation for large MTC periods
perf intel-pt: Fix estimated timestamps for cycle-accurate mode
perf uretprobe ppc64le: Fix probe location
perf pmu-events: Add Skylake frontend MSR support
perf pmu-events: Fix fixed counters on Intel
perf tools: Make alias matching case-insensitive
perf tools: Allow period= in perf stat CPU event descriptions.
perf tools: Add README for info on parsing JSON/map files
perf list jevents: Add support for event list topics
perf list: Support long jevents descriptions
...
Linus Torvalds [Mon, 10 Oct 2016 17:29:59 +0000 (10:29 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A revert of a commit which pointelessly widened a preempt disabled
section which in turn caused might_sleep() to trigger.
The patch intended to prevent usage of smp_processor_id() in
preemptible context, but the usage in that case is fine because the
thread is pinned on a single cpu and therefore cannot be migrated off"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/core: Do not use smp_processor_id() with preempt enabled in smpboot_thread_fn()"
Linus Torvalds [Mon, 10 Oct 2016 17:23:18 +0000 (10:23 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for a regression introduced in 4.8 which causes the
trace/perf clock to return random nonsense if CONFIG_DEBUG_TIMEKEEPING
is set"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix __ktime_get_fast_ns() regression
Linus Torvalds [Mon, 10 Oct 2016 16:29:50 +0000 (09:29 -0700)]
Merge branch 'printk-cleanups'
Merge my system logging cleanups, triggered by the broken '\n' patches.
The line continuation handling has been broken basically forever, and
the code to handle the system log records was both confusing and
dubious. And it would do entirely the wrong thing unless you always had
a terminating newline, partly because it couldn't actually see whether a
message was marked KERN_CONT or not (but partly because the LOG_CONT
handling in the recording code was rather confusing too).
This re-introduces a real semantically meaningful KERN_CONT, and fixes
the few places I noticed where it was missing. There are probably more
missing cases, since KERN_CONT hasn't actually had any semantic meaning
for at least four years (other than the checkpatch meaning of "no log
level necessary, this is a continuation line").
This also allows the combination of KERN_CONT and a log level. In that
case the log level will be ignored if the merging with a previous line
is successful, but if a new record is needed, that new record will now
get the right log level.
That also means that you can at least in theory combine KERN_CONT with
the "pr_info()" style helpers, although any use of pr_fmt() prefixing
would make that just result in a mess, of course (the prefix would end
up in the middle of a continuing line).
* printk-cleanups:
printk: make reading the kernel log flush pending lines
printk: re-organize log_output() to be more legible
printk: split out core logging code into helper function
printk: reinstate KERN_CONT for printing continuation lines
After backporting commit ee44b4bc054a ("dlm: use sctp 1-to-1 API")
series to a kernel with an older workqueue which didn't use RCU yet, it
was noticed that we are freeing the workqueues in dlm_lowcomms_stop()
too early as free_conn() will try to access that memory for canceling
the queued works if any.
This issue was introduced by commit 0d737a8cfd83 as before it such
attempt to cancel the queued works wasn't performed, so the issue was
not present.
This patch fixes it by simply inverting the free order.
Paul Burton [Sat, 8 Oct 2016 21:47:14 +0000 (22:47 +0100)]
MIPS: Enable hardened usercopy
Enable CONFIG_HARDENED_USERCOPY checks for MIPS, calling check_object
size in all of copy_{to,from}_user(), __copy_{to,from}_user() &
__copy_{to,from}_user_inatomic().
Chris Wilson [Mon, 10 Oct 2016 12:50:17 +0000 (13:50 +0100)]
drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
The conflict resolution of v4.8-rc8 backmerge to drm-next pulled back in
a few lines of dead code due to the code movement around
i915_gem_reset(), fix that up.
Shuah Khan [Thu, 6 Oct 2016 22:00:50 +0000 (16:00 -0600)]
samples: move blackfin gptimers-example from Documentation
Move blackfin gptimers-example to samples and remove it from Documentation
Makefile. Update samples Kconfig and Makefile to build gptimers-example.
blackfin is the last CONFIG_BUILD_DOCSRC target in Documentation/Makefile.
Hence this patch also includes changes to remove CONFIG_BUILD_DOCSRC from
Makefile and lib/Kconfig.debug and updates VIDEO_PCI_SKELETON dependency
on BUILD_DOCSRC.
Documentation/Makefile is not deleted to avoid braking make htmldocs and
make distclean.
Chris Wilson [Fri, 7 Oct 2016 06:53:27 +0000 (07:53 +0100)]
drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
We reserve space in the GuC workqueue for submitting the request in the
future. However, if we fail to construct the request, we need to give
that reserved space back to the system.
Chris Wilson [Fri, 7 Oct 2016 06:53:26 +0000 (07:53 +0100)]
drm/i915: Reset the breadcrumbs IRQ more carefully
Along with the interrupt, we want to restore the fake-irq and
wait-timeout detection. If we use the breadcrumbs interface to setup the
interrupt as it wants, the auxiliary timers will also be restored.
Chris Wilson [Fri, 7 Oct 2016 06:53:25 +0000 (07:53 +0100)]
drm/i915: Force relocations via cpu if we run out of idle aperture
If we run out of enough aperture space to fit the entire object, we
fallback to trying to insert a single page. However, if that also fails,
we currently fail to userspace with an unexpected ENOSPC. (ENOSPC means
to userspace that their batch could not be fitted within the GTT.) Prior
to commit e8cb909ac3ab ("drm/i915: Fallback to single page GTT
mmappings for relocations") the approach is to fallback to using the
slow CPU relocation path in case of iomapping failure, and that is the
behaviour we need to restore.
Chris Wilson [Fri, 7 Oct 2016 06:53:24 +0000 (07:53 +0100)]
drm/i915: Distinguish last emitted request from last submitted request
In order not to trigger hangcheck on a idle-but-waiting engine, we need
to distinguish between the pending request queue and the actual
execution queue. This is done later in "drm/i915: Enable multiple
timelines" but for now we need a temporary fix to prevent blaming the
wrong engine for a GPU hang.
(Note that this causes a temporary subtle change in how we decide when
to allow a waitboost to be re-awarded back to the waiter, the temporary
effect is that if the wait is upon the most current execution the wait
is given for free, instead of checking to see if the client stalled
itself. This will be repaired in "drm/i915: Enable multiple timelines".)
Ville Syrjälä [Mon, 3 Oct 2016 07:55:16 +0000 (10:55 +0300)]
drm/i915: Allow DP to work w/o EDID
Allow returning "connected" or "unknown" connector status for DP branch
devices that don't have an EDID. Currently we'd claim the thing as
"disconnected" if there is no EDID.
This stuff used to broken already, I think, but it got more broken by
commit f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
Ville Syrjälä [Mon, 3 Oct 2016 07:55:15 +0000 (10:55 +0300)]
drm/i915: Move long hpd handling into the hotplug work
We can't rely on connector->status in the detect() hook if the long hpd
was already handled by the dig_port_work as that won't update
connector->status. Thus we have to defer the long hpd handling entirely
until the hotplug work runs to avoid the double long hpd handling
the "detect_done" flag is trying to prevent.
We'll start to depend on connector->status being up to date in a
following patch.
Chris Wilson [Tue, 4 Oct 2016 20:11:26 +0000 (21:11 +0100)]
drm/i915/execlists: Reinitialise context image after GPU hang
On Braswell, at least, we observe that the context image is written in
multiple phases. The first phase is to clear the register state, and
subsequently rewrite it. A GPU reset at the right moment can interrupt
the context update leaving it corrupt, and our update of the RING_HEAD
is not sufficient to restart the engine afterwards. To recover, we need
to reset the registers back to their original values. The context state
is lost. What we need is a better mechanism to serialise the reset with
pending flushes from the GPU.
Chris Wilson [Mon, 3 Oct 2016 12:45:15 +0000 (13:45 +0100)]
drm/i915: Unalias obj->phys_handle and obj->userptr
We use obj->phys_handle to choose the pread/pwrite path, but as
obj->phys_handle is a union with obj->userptr, we then mistakenly use
the phys_handle path for userptr objects within pread/pwrite.
Chris Wilson [Mon, 3 Oct 2016 12:45:14 +0000 (13:45 +0100)]
drm/i915: Just clear the mmiodebug before a register access
When we enable the per-register access mmiodebug, it is to detect which
access is illegal. Reporting on earlier untraced access outside of the
mmiodebug does not help debugging (as the suspicion is immediately put
upon the current register which is not at fault)!
Paulo Zanoni [Thu, 29 Sep 2016 19:36:48 +0000 (16:36 -0300)]
drm/i915/gen9: only add the planes actually affected by ddb changes
We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().
This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.
v2: Use skl_ddb_entry_equal() (Lyude).
v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch
Ville Syrjälä [Mon, 26 Sep 2016 08:30:46 +0000 (11:30 +0300)]
drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
forbidden to set it for LVDS/CRT as well. So let's also set it on
CRT to make it possible to share the DPLL between HDMI and CRT.
What that bit apparently does is enable the x5 clock to the port,
which then pumps out the bits on both edges of the clock. The DAC
doesn't need that clock since it's not pumping out bits, but I don't
think it hurts to have the DPLL output that clock anyway.
This is fairly important on IVB since it has only two DPLLs with three
pipes. So trying to drive three or more PCH ports with three pipes
is only possible when at least one of the DPLLs gets shared between
two of the pipes.
SNB doesn't really need to do this since it has only two pipes. It could
be done to avoid enabling the second DPLL at all in certain cases, but
I'm not sure that's such a huge win. So let's not do it for SNB, at
least for now. On ILK it never makes sense as the DPLLs can't be shared.
v2: Just always enable the high speed clock to keep things simple (Daniel)
Beef up the commit message a bit (Daniel)
Imre Deak [Mon, 26 Sep 2016 14:54:31 +0000 (17:54 +0300)]
drm/i915/bxt: Fix HDMI DPLL configuration
a277ca7dc01d should've been a no-functional-change commit, but it
removed the initialization of the dpll_hw_state for HDMI outputs,
resulting in state mismatches and a failed modeset with blank
screen. Fix this by reinstating the dpll_hw_state initialization.
v2:
- Make bxt_ddi_hdmi_set_dpll_hw_state() static.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:33 +0000 (18:00 -0300)]
drm/i915/gen9: fix the watermark res_blocks value
We forgot the "res_blocks += y_tile_minimum" that's described on step
V of our documentation.
Again, this should only affect the Y tiling cases.
It looks like the relevant code was introduced in 0fda65680e92, but
there's always the possibility that it matched our specification when
it was introduced, and then the specification changed while the code
stayed the same. So we can't really say this was a regression, but
let's try to add a "Fixes" tag anyway to help backporting.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:32 +0000 (18:00 -0300)]
drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
The confusing thing is that plane_blocks_per_line is listed as part of
the method 2 calculation but is also used for other things. We
calculated it in two different places and different ways: one inside
skl_wm_method2() and the other inside skl_compute_plane_wm(). The
skl_wm_method2() implementation is the one that matches the
specification.
With this patch we fix the skl_compute_plane_wm() calculation and just
pass it as a parameter to skl_wm_method2(). We also take care to not
modify the value of plane_bytes_per_line since we're going to rely on
it having a correct value in later patches.
This should affect the watermarks for Linear and Y-tiled.
From my analysis, it looks like the two plane_blocks_per_line
variables got out of sync on 0fda65680e92, but we can't really say
that commit was a regression, it looks like just an incomplete fix.
There's always the possibility that 0fda65680e92 matched our
specification at that time, and then later the specification changed.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:31 +0000 (18:00 -0300)]
drm/i915/gen9: minimum scanlines for Y tile is not always 4
During watermarks calculations, this value is used in 3 different
places. Only one of them was not using a hardcoded 4. Move the code up
so everybody can benefit from the actual value.
This should only help on situations with Y tiling + 90/270 rotation +
1 or 2 bpp or NV12.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:30 +0000 (18:00 -0300)]
drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
Bspec says:
"The mailbox response data may not account for memory read latency.
If the mailbox response data for level 0 is 0us, add 2 microseconds
to the result for each valid level."
This means we should only do the +2 in case wm[0] == 0, not always.
So split the sanitizing implementation from the WA implementation and
fix the WA implementation.
Paulo Zanoni [Thu, 22 Sep 2016 21:00:28 +0000 (18:00 -0300)]
drm/i915: introduce intel_has_sagv()
And use it to move knowledge about the SAGV-supporting platforms from
the callers to the SAGV code.
We'll add more platforms to intel_has_sagv(), so IMHO it makes more
sense to move all this to a single function instead of patching all
the callers every time we add SAGV support to a new platform.
v2: Move I915_SAGV_NOT_CONTROLLED to the new function (Lyude).
Paulo Zanoni [Thu, 22 Sep 2016 21:00:27 +0000 (18:00 -0300)]
drm/i915: SAGV is not SKL-only, so rename a few things
The plan is to introduce intel_has_sagv() and then use it to discover
which platforms actually support it.
I thought about keeping the functions with their current skl names,
but found two problems: (i) skl_has_sagv() would become a very
confusing name, and (ii) intel_atomic_commit_tail() doesn't seem to be
calling any functions whose name start with a platform name, so the
"intel_" naming scheme seems make more sense than the "firstplatorm_"
naming scheme here.
Paulo Zanoni [Fri, 19 Aug 2016 22:03:23 +0000 (19:03 -0300)]
drm/i915: don't forget to set intel_crtc->dspaddr_offset on SKL+
We never remembered to set it (so it was zero), but this was not a
problem in the past due to the way handled the hardware registers.
Unfortunately we changed how we set the hardware and forgot to set
intel_crtc->dspaddr_offset.
This started to reflect on a few kms_frontbuffer_tracking subtests
that relied on page flips with CRTCs that don't point to the x:0,y:0
coordinates of the frontbuffer. After the page flip the CRTC was
showing the x:0,y:0 coordinate of the frontbuffer instead of
x:500,y:500. This problem is present even if we don't enable FBC or
PSR.
While trying to bisect it I realized that the first bad commit
actually just gives me a black screen for the mentioned tests instead
of showing the wrong x:0,y:0 offsets. A few commits later the black
screen problem goes away and we get to the point where the code is
today, but I'll consider the black screen as the first bad commit
since it's the point where the IGT subtests start to fail.
Chris Wilson [Wed, 21 Sep 2016 13:51:07 +0000 (14:51 +0100)]
drm/i915: Only shrink the unbound objects during freeze
At the point of creating the hibernation image, the runtime power manage
core is disabled - and using the rpm functions triggers a warn.
i915_gem_shrink_all() tries to unbind objects, which requires device
access and so tries to how an rpm reference triggering a warning:
Chris Wilson [Wed, 21 Sep 2016 13:51:06 +0000 (14:51 +0100)]
drm/i915: Restore current RPS state after reset
Following commit 821ed7df6e2a ("drm/i915: Update reset path to fix
incomplete requests") we no longer mark the context as lost on reset as
we keep the requests (and contexts) alive. However, RPS remains reset
and we need to restore the current state to match the in-flight
requests.
Imre Deak [Wed, 14 Sep 2016 10:04:13 +0000 (13:04 +0300)]
drm/i915: Unlock PPS registers after GPU reset
Reapply the PPS register unlock workaround after GPU reset on platforms
where the reset clobbers the display HW state. This at least gets rid of
the related WARN during LVDS encoder enabling on PNV.
Shawn Lee [Mon, 19 Sep 2016 10:35:26 +0000 (13:35 +0300)]
drm/i915/backlight: setup backlight pwm alternate increment on backlight enable
Backlight enable is supposed to do a full setup of the backlight. We
were missing the PWM alternate increment bit in the south chicken
registers on lpt+ pch. This potentially caused a PWM frequency change
when the chicken register value was lost e.g. on suspend.
v2 by Jani, rebase on the patch caching alt increment
Andrej Krutak [Wed, 5 Oct 2016 15:46:09 +0000 (17:46 +0200)]
ALSA: line6: Fix POD X3 Live audio input
The commit c039aaa77a7d1d9375665a8b59ec16dc7d23e259 was incomplete,
missing part of the setup for Live. This makes also audio input work,
in addition to audio output.
Dave Airlie [Mon, 10 Oct 2016 06:40:16 +0000 (16:40 +1000)]
Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-next
Just some misc bug fixes for 4.9.
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: revert "use more than 64KB fragment size if possible"
drm/amdgpu: warn if dp aux is still attached on free
drm/amdgpu/dce11: add missing drm_mode_config_cleanup call
drm/amdgpu: also track late init state
drm/amdgpu/virtual_dce: adjust config ifdef
drm/amdgpu/vce: add support for hw config packet (v2)
drm/amdgpu: clean up to set fw_offset as 0 twice
drm/amdgpu: remove DRM_AMD_POWERPLAY
drm/radeon: Prevent races on pre DCE4 between flip submission and completion.
drm/radeon: Slightly more robust flip completion handling for < DCE-4
Dave Airlie [Mon, 10 Oct 2016 06:36:16 +0000 (16:36 +1000)]
Merge tag 'topic/drm-misc-2016-10-05' of git://anongit.freedesktop.org/drm-intel into drm-next
Another attempt, this time rebased and without the pipe crc patches:
- display_info cleanups from Ville
- make prime/gem lookups faster with rbtrees (Chris)
- misc stuff all over
* tag 'topic/drm-misc-2016-10-05' of git://anongit.freedesktop.org/drm-intel:
drm/rockchip: analogix_dp: Refuse to enable PSR if panel doesn't support it
drm/bridge: analogix_dp: Add analogix_dp_psr_supported
drm/fb-helper: add DRM_FB_HELPER_DEFAULT_OPS for fb_ops
drm: Document caveats around atomic event handling
uapi: add missing install of sync_file.h
drm: Simplify drm_printk to reduce object size quite a bit
drm/i915: Account for sink max TMDS clock when checking the port clock
drm/i915: Replace a bunch of connector->base.display_info with a local variable
drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()
drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDID
drm/edid: Reduce the number of times we parse the CEA extension block
drm/edid: Don't pass around drm_display_info needlessly
drm/edid: Move dvi_dual/max_tmds_clock to drm_display_info
drm/edid: Make max_tmds_clock kHz instead of MHz
drm/edid: Clear old dvi_dual/max_tmds_clock before parsing the new EDID
drm/edid: Clear old audio latency values before parsing the new EDID
drm: Convert prime dma-buf <-> handle to rbtree
drm/mediatek: mark symbols static where possible
drm/rockchip: mark symbols static where possible
drm/rockchip: add missing header dependencies
Dave Airlie [Mon, 10 Oct 2016 06:32:58 +0000 (16:32 +1000)]
Merge tag 'drm-vc4-next-2016-10-06' of https://github.com/anholt/linux into drm-next
This pull request brings in several fixes for drm-next, mostly for
HDMI.
* tag 'drm-vc4-next-2016-10-06' of https://github.com/anholt/linux:
drm/vc4: Add support for double-clocked modes.
drm/vc4: Set up the AVI and SPD infoframes.
drm/vc4: Fix support for interlaced modes on HDMI.
drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes.
drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.
drm/vc4: Enable limited range RGB output on HDMI with CEA modes.
drm/vc4: Fix races when the CS reads from render targets.
drm/vc4: cleanup with list_first_entry_or_null()
Darrick J. Wong [Mon, 10 Oct 2016 06:23:07 +0000 (17:23 +1100)]
xfs: rework refcount cow recovery error handling
The error handling in xfs_refcount_recover_cow_leftovers is confused
and can potentially leak memory, so rework it to release resources
correctly on error.
projects / linux.git / log