Guo Ren [Fri, 2 Nov 2018 16:51:28 +0000 (00:51 +0800)]
clocksource/drivers/c-sky: Add C-SKY SMP timer
The driver is for C-SKY SMP timer. It only supports oneshot event
and 32bit overflow for clocksource. Per cpu core has one timer and
all timers share one clock-counter-input from the same clocksource.
This use mfcr&mtcr instructions to access the regs.
__swiotlb_get_sgtable_page and __swiotlb_mmap_pfn are not only misnamed
but also only used if CONFIG_IOMMU_DMA is set. Just add a simple ifdef
for now, given that we plan to remove them entirely for the next merge
window.
Linus Torvalds [Fri, 2 Nov 2018 18:25:48 +0000 (11:25 -0700)]
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
Linus Torvalds [Fri, 2 Nov 2018 18:22:45 +0000 (11:22 -0700)]
Merge tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This series contains a number of improvements to existing drivers,
such as LPSS. Some drivers, such as renesas-tpu and rcar get support
for more SoC generations. To round things off this fixes an issue with
the sysfs interface"
* tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: lpss: Only set update bit if we are actually changing the settings
pwm: lpss: Force runtime-resume on suspend on Cherry Trail
pwm: Enable TI ECAP driver for ARCH_K3
dt-bindings: pwm: tiecap: Add TI AM654 SoC specific compatible
dt-bindings: pwm: rcar: Add r8a774a1 support
pwm: Send a uevent on the pwmchip device upon channel sysfs (un)export
Revert "pwm: Set class for exported channels in sysfs"
dt-bindings: pwm: renesas-tpu: Document r8a7744 support
dt-bindings: pwm: rcar: Add r8a7744 support
dt-bindings: pwm: renesas: tpu: Document R8A779{7|8}0 bindings
dt-bindings: pwm: renesas: pwm-rcar: Document R8A779{7|8}0 bindings
dt-bindings: pwm: renesas: tpu: Fix "compatible" prop description
pwm: Use SPDX identifier for Renesas drivers
pwm: lpss: Add get_state callback
pwm: lpss: Release runtime-pm reference from the driver's remove callback
pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices
pwm: lpss: Move struct pwm_lpss_chip definition to the header file
pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices
ACPI / PM: Export acpi_device_get_power() for use by modular build drivers
pwm: tegra: Remove gratuituous blank line
Marc Zyngier [Wed, 31 Oct 2018 08:41:34 +0000 (08:41 +0000)]
soc: ti: QMSS: Fix usage of irq_set_affinity_hint
The Keystone QMSS driver is pretty damaged, in the sense that it
does things like this:
irq_set_affinity_hint(irq, to_cpumask(&cpu_map));
where cpu_map is a local variable. As we leave the function, this
will point to nowhere-land, and things will end-up badly.
Instead, let's use a proper cpumask that gets allocated, giving
the driver a chance to actually work with things like irqbalance
as well as have a hypothetical 64bit future.
Linus Torvalds [Fri, 2 Nov 2018 18:17:22 +0000 (11:17 -0700)]
Merge tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull more EDAC updates from Borislav Petkov:
"The second part of the EDAC pile which contains the ADXL user and a
build fix which addresses a not-so-sensical .config but fixes
randconfig builds people do:
- skx_edac: Address translation for NVDIMMs (Tony Luck and Qiuxu Zhuo)
- ACPI_ADXL build fix"
[ I don't think "sensical" is a word, particularly when used in the
context of actually meaning "nonsensical", but I like it - Linus ]
* tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, skx: Fix randconfig builds
EDAC, skx_edac: Add address translation for non-volatile DIMMs
Anders Roxell [Tue, 30 Oct 2018 11:38:50 +0000 (12:38 +0100)]
arm64: kprobe: make page to RO mode when allocate it
Commit 1404d6f13e47 ("arm64: dump: Add checking for writable and exectuable pages")
has successfully identified code that leaves a page with W+X
permissions.
kprobes allocates a writable executable page with module_alloc() in
order to store executable code.
Reworked to that when allocate a page it sets mode RO. Inspired by
commit 63fef14fc98a ("kprobes/x86: Make insn buffer always ROX and use text_poke()").
Linus Torvalds [Fri, 2 Nov 2018 18:02:52 +0000 (11:02 -0700)]
Merge tag 'sound-fix-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few device-specific fixes: a fix for SPDIF on old Creative PCI
board, and two additional fixes for the recent changes in FireWire
audio stack"
* tag 'sound-fix-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size
ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio pops
ALSA: dice: fix to wait for releases of all ALSA character devices
Linus Torvalds [Fri, 2 Nov 2018 17:58:20 +0000 (10:58 -0700)]
Merge tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Pretty much a normal fixes pull pre-rc1, mostly amdgpu fixes, one i915
link training regression fix, and a couple of minor panel/bridge fixes
and a panel quirk"
* tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default"
drm/amd/pp: Print warning if od_sclk/mclk out of range
drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10
drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7
drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled
drm/amdgpu: Fix skipping hangged job reset during gpu recover.
drm/amd/powerplay: revise Vega20 pptable version check
drm/amd/display: set backlight level limit to 1
drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
drm/bridge: ti-sn65dsi86: Remove the mystery delay
drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM
drm/panel: simple: Support panels with HPD where HPD isn't connected
dt-bindings: drm/panel: simple: Add no-hpd property
drm/edid: Add 6 bpc quirk for BOE panel.
drm/amdgpu: fix reporting of failed msg sent to SMU (v2)
drm/amdgpu: Fix compute ring 1.0.0 failure after reset
drm/amdgpu: fix VM leaf walking
drm/amdgpu: fix amdgpu_vm_fini
drm/amd/powerplay: commonize the API for retrieving current clocks
...
Victor Kamensky [Tue, 30 Oct 2018 23:37:10 +0000 (16:37 -0700)]
arm64: makefile fix build of .i file in external module case
After 'a66649dab350 arm64: fix vdso-offsets.h dependency' if
one will try to build .i file in case of external kernel module,
build fails complaining that prepare0 target is missing. This
issue came up with SystemTap when it tries to build variety
of .i files for its own generated kernel modules trying to
figure given kernel features/capabilities.
The issue is that prepare0 is defined in top level Makefile
only if KBUILD_EXTMOD is not defined. .i file rule depends
on prepare and in case KBUILD_EXTMOD defined top level Makefile
contains empty rule for prepare. But after mentioned commit
arch/arm64/Makefile would introduce dependency on prepare0
through its own prepare target.
Fix it to put proper ifdef KBUILD_EXTMOD around code introduced
by mentioned commit. It matches what top level Makefile does.
Linus Torvalds [Fri, 2 Nov 2018 17:04:26 +0000 (10:04 -0700)]
Merge tag 'apparmor-pr-2018-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features/Improvements:
- replace spin_is_locked() with lockdep
- add base support for secmark labeling and matching
Cleanups:
- clean an indentation issue, remove extraneous space
- remove no-op permission check in policy_unpack
- fix checkpatch missing spaces error in Parse secmark policy
- fix network performance issue in aa_label_sk_perm
Bug fixes:
- add #ifdef checks for secmark filtering
- fix an error code in __aa_create_ns()
- don't try to replace stale label in ptrace checks
- fix failure to audit context info in build_change_hat
- check buffer bounds when mapping permissions mask
- fully initialize aa_perms struct when answering userspace query
- fix uninitialized value in aa_split_fqname"
* tag 'apparmor-pr-2018-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: clean an indentation issue, remove extraneous space
apparmor: fix checkpatch error in Parse secmark policy
apparmor: add #ifdef checks for secmark filtering
apparmor: Fix uninitialized value in aa_split_fqname
apparmor: don't try to replace stale label in ptraceme check
apparmor: Replace spin_is_locked() with lockdep
apparmor: Allow filtering based on secmark policy
apparmor: Parse secmark policy
apparmor: Add a wildcard secid
apparmor: don't try to replace stale label in ptrace access check
apparmor: Fix network performance issue in aa_label_sk_perm
Linus Torvalds [Fri, 2 Nov 2018 16:33:08 +0000 (09:33 -0700)]
Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
Linus Torvalds [Fri, 2 Nov 2018 16:19:35 +0000 (09:19 -0700)]
Merge tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some things that I missed due to travel, or that came in late.
Two fixes also going to stable:
- A revert of a buggy change to the 8xx TLB miss handlers.
- Our flushing of SPE (Signal Processing Engine) registers on fork
was broken.
Other changes:
- A change to the KVM decrementer emulation to use proper APIs.
- Some cleanups to the way we do code patching in the 8xx code.
- Expose the maximum possible memory for the system in
/proc/powerpc/lparcfg.
- Merge some updates from Scott: "a couple device tree updates, and a
fix for a missing prototype warning"
A few other minor fixes and a handful of fixes for our selftests.
Thanks to: Aravinda Prasad, Breno Leitao, Camelia Groza, Christophe
Leroy, Felipe Rechia, Joel Stanley, Naveen N. Rao, Paul Mackerras,
Scott Wood, Tyrel Datwyler"
* tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
selftests/powerpc: Fix compilation issue due to asm label
selftests/powerpc/cache_shape: Fix out-of-tree build
selftests/powerpc/switch_endian: Fix out-of-tree build
selftests/powerpc/pmu: Link ebb tests with -no-pie
selftests/powerpc/signal: Fix out-of-tree build
selftests/powerpc/ptrace: Fix out-of-tree build
powerpc/xmon: Relax frame size for clang
selftests: powerpc: Fix warning for security subdir
selftests/powerpc: Relax L1d miss targets for rfi_flush test
powerpc/process: Fix flush_all_to_thread for SPE
powerpc/pseries: add missing cpumask.h include file
selftests/powerpc: Fix ptrace tm failure
KVM: PPC: Use exported tb_to_ns() function in decrementer emulation
powerpc/pseries: Export maximum memory value
powerpc/8xx: Use patch_site for perf counters setup
powerpc/8xx: Use patch_site for memory setup patching
powerpc/code-patching: Add a helper to get the address of a patch_site
Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
powerpc/8xx: add missing header in 8xx_mmu.c
powerpc/8xx: Add DT node for using the SEC engine of the MPC885
...
Linus Torvalds [Fri, 2 Nov 2018 16:17:39 +0000 (09:17 -0700)]
Merge tag 'riscv-for-linus-4.20-mw3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V defconfig update from Palmer Dabbelt:
"Sorry for the last minute patches, but it was suggested we try to push
this in before rc1 to make it easier for people to keep their branch
rebases sane"
* tag 'riscv-for-linus-4.20-mw3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: refresh defconfig
Keith Busch [Wed, 31 Oct 2018 19:15:29 +0000 (13:15 -0600)]
nvme-pci: fix conflicting p2p resource adds
The nvme pci driver had been adding its CMB resource to the P2P DMA
subsystem everytime on on a controller reset. This results in the
following warning:
------------[ cut here ]------------
nvme 0000:00:03.0: Conflicting mapping in same section
WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380
...
Call Trace:
pci_p2pdma_add_resource+0x153/0x370
nvme_reset_work+0x28c/0x17b1 [nvme]
? add_timer+0x107/0x1e0
? dequeue_entity+0x81/0x660
? dequeue_entity+0x3b0/0x660
? pick_next_task_fair+0xaf/0x610
? __switch_to+0xbc/0x410
process_one_work+0x1cf/0x350
worker_thread+0x215/0x3d0
? process_one_work+0x350/0x350
kthread+0x107/0x120
? kthread_park+0x80/0x80
ret_from_fork+0x1f/0x30
---[ end trace f7ea76ac6ee72727 ]---
nvme nvme0: failed to register the CMB
This patch fixes this by registering the CMB with P2P only once.
James Smart [Sat, 27 Oct 2018 19:41:54 +0000 (12:41 -0700)]
nvme-fc: fix request private initialization
The patch made to avoid Coverity reporting of out of bounds access
on aen_op moved the assignment of a pointer, leaving it null when it
was subsequently used to calculate a private pointer. Thus the private
pointer was bad.
Move/correct the private pointer initialization to be in sync with the
patch.
Masahiro Yamada [Tue, 30 Oct 2018 13:26:34 +0000 (22:26 +0900)]
kbuild: remove cc-name variable
There is one more user of $(cc-name) in the top Makefile. It is supposed
to detect Clang before invoking Kconfig, so it should still be there
in the $(shell ...) form. All the other users of $(cc-name) have been
replaced with $(CONFIG_CC_IS_CLANG). Hence, scripts/Kbuild.include does
not need to define cc-name any more.
Linus Torvalds [Fri, 2 Nov 2018 03:19:49 +0000 (20:19 -0700)]
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"No common topic, really - a handful of assorted stuff; the least
trivial bits are Mark's dedupe patches"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/exofs: only use true/false for asignment of bool type variable
fs/exofs: fix potential memory leak in mount option parsing
Delete invalid assignment statements in do_sendfile
iomap: remove duplicated include from iomap.c
vfs: dedupe should return EPERM if permission is not granted
vfs: allow dedupe of user owned read-only files
ntfs: don't open-code ERR_CAST
ext4: don't open-code ERR_CAST
Linus Torvalds [Fri, 2 Nov 2018 02:58:52 +0000 (19:58 -0700)]
Merge branch 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
Dave Airlie [Fri, 2 Nov 2018 02:56:24 +0000 (12:56 +1000)]
Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-next
- Fix flickering at low backlight levels on some systems
- Fix some overclocking regressions
- Vega20 updates for
- GPU recovery fixes
- Disable gfxoff on RV as some sbios/fw combinations are not stable yet
Dave Airlie [Fri, 2 Nov 2018 01:53:48 +0000 (11:53 +1000)]
Merge tag 'drm-misc-next-fixes-2018-10-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Properly label Innolux TV123WAM as P120ZDG-BF1 (Doug)
- Add optional delay for panels without hpd hooked up (which solves the
mystery delay for TI SN65DSI86 bridge) (Doug)
- Another 6bpc quirk for BOE panel 0x0771 (Shawn)
Dennis Zhou [Thu, 1 Nov 2018 21:24:10 +0000 (17:24 -0400)]
blkcg: revert blkcg cleanups series
This reverts a series committed earlier due to null pointer exception
bug report in [1]. It seems there are edge case interactions that I did
not consider and will need some time to understand what causes the
adverse interactions.
The original series can be found in [2] with a follow up series in [3].
Ming Lei [Fri, 2 Nov 2018 00:50:51 +0000 (08:50 +0800)]
block: brd: associate with queue until adding disk
brd_free() may be called in failure path on one brd instance which
disk isn't added yet, so release handler of gendisk may free the
associated request_queue early and causes the following use-after-free[1].
This patch fixes this issue by associating gendisk with request_queue
just before adding disk.
[1] KASAN: use-after-free Read in del_timer_syncNon-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
usbcore: registered new interface driver udl
==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20
kernel/locking/lockdep.c:3218
Read of size 8 at addr ffff8801d1b6b540 by task swapper/0/1
Linus Torvalds [Fri, 2 Nov 2018 01:34:46 +0000 (18:34 -0700)]
Merge tag 'compiler-attributes-for-linus-4.20-rc1' of https://github.com/ojeda/linux
Pull compiler attribute updates from Miguel Ojeda:
"This is an effort to disentangle the include/linux/compiler*.h headers
and bring them up to date.
The main idea behind the series is to use feature checking macros
(i.e. __has_attribute) instead of compiler version checks (e.g.
GCC_VERSION), which are compiler-agnostic (so they can be shared,
reducing the size of compiler-specific headers) and version-agnostic.
Other related improvements have been performed in the headers as well,
which on top of the use of __has_attribute it has amounted to a
significant simplification of these headers (e.g. GCC_VERSION is now
only guarding a few non-attribute macros).
This series should also help the efforts to support compiling the
kernel with clang and icc. A fair amount of documentation and comments
have also been added, clarified or removed; and the headers are now
more readable, which should help kernel developers in general.
The series was triggered due to the move to gcc >= 4.6. In turn, this
series has also triggered Sparse to gain the ability to recognize
__has_attribute on its own.
Finally, the __nonstring variable attribute series has been also
applied on top; plus two related patches from Nick Desaulniers for
unreachable() that came a bit afterwards"
* tag 'compiler-attributes-for-linus-4.20-rc1' of https://github.com/ojeda/linux:
compiler-gcc: remove comment about gcc 4.5 from unreachable()
compiler.h: update definition of unreachable()
Compiler Attributes: ext4: remove local __nonstring definition
Compiler Attributes: auxdisplay: panel: use __nonstring
Compiler Attributes: enable -Wstringop-truncation on W=1 (gcc >= 8)
Compiler Attributes: add support for __nonstring (gcc >= 8)
Compiler Attributes: add MAINTAINERS entry
Compiler Attributes: add Doc/process/programming-language.rst
Compiler Attributes: remove uses of __attribute__ from compiler.h
Compiler Attributes: KENTRY used twice the "used" attribute
Compiler Attributes: use feature checks instead of version checks
Compiler Attributes: add missing SPDX ID in compiler_types.h
Compiler Attributes: remove unneeded sparse (__CHECKER__) tests
Compiler Attributes: homogenize __must_be_array
Compiler Attributes: remove unneeded tests
Compiler Attributes: always use the extra-underscores syntax
Compiler Attributes: remove unused attributes
Linus Torvalds [Thu, 1 Nov 2018 22:23:59 +0000 (15:23 -0700)]
Merge branch 'next-keys2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull keys updates from James Morris:
"Provide five new operations in the key_type struct that can be used to
provide access to asymmetric key operations. These will be implemented
for the asymmetric key type in a later patch and may refer to a key
retained in RAM by the kernel or a key retained in crypto hardware.
int (*asym_query)(const struct kernel_pkey_params *params,
struct kernel_pkey_query *info);
int (*asym_eds_op)(struct kernel_pkey_params *params,
const void *in, void *out);
int (*asym_verify_signature)(struct kernel_pkey_params *params,
const void *in, const void *in2);
Since encrypt, decrypt and sign are identical in their interfaces,
they're rolled together in the asym_eds_op() operation and there's an
operation ID in the params argument to distinguish them.
Verify is different in that we supply the data and the signature
instead and get an error value (or 0) as the only result on the
expectation that this may well be how a hardware crypto device may
work"
* 'next-keys2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (22 commits)
KEYS: asym_tpm: Add support for the sign operation [ver #2]
KEYS: asym_tpm: Implement tpm_sign [ver #2]
KEYS: asym_tpm: Implement signature verification [ver #2]
KEYS: asym_tpm: Implement the decrypt operation [ver #2]
KEYS: asym_tpm: Implement tpm_unbind [ver #2]
KEYS: asym_tpm: Add loadkey2 and flushspecific [ver #2]
KEYS: Move trusted.h to include/keys [ver #2]
KEYS: trusted: Expose common functionality [ver #2]
KEYS: asym_tpm: Implement encryption operation [ver #2]
KEYS: asym_tpm: Implement pkey_query [ver #2]
KEYS: Add parser for TPM-based keys [ver #2]
KEYS: asym_tpm: extract key size & public key [ver #2]
KEYS: asym_tpm: add skeleton for asym_tpm [ver #2]
crypto: rsa-pkcs1pad: Allow hash to be optional [ver #2]
KEYS: Implement PKCS#8 RSA Private Key parser [ver #2]
KEYS: Implement encrypt, decrypt and sign for software asymmetric key [ver #2]
KEYS: Allow the public_key struct to hold a private key [ver #2]
KEYS: Provide software public key query function [ver #2]
KEYS: Make the X.509 and PKCS7 parsers supply the sig encoding type [ver #2]
KEYS: Provide missing asymmetric key subops for new key type ops [ver #2]
...
Linus Torvalds [Thu, 1 Nov 2018 21:48:48 +0000 (14:48 -0700)]
Merge tag 'ovl-update-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"A mix of fixes and cleanups"
* tag 'ovl-update-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: automatically enable redirect_dir on metacopy=on
ovl: check whiteout in ovl_create_over_whiteout()
ovl: using posix_acl_xattr_size() to get size instead of posix_acl_to_xattr()
ovl: abstract ovl_inode lock with a helper
ovl: remove the 'locked' argument of ovl_nlink_{start,end}
ovl: relax requirement for non null uuid of lower fs
ovl: fold copy-up helpers into callers
ovl: untangle copy up call chain
ovl: relax permission checking on underlying layers
ovl: fix recursive oi->lock in ovl_link()
vfs: fix FIGETBSZ ioctl on an overlayfs file
ovl: clean up error handling in ovl_get_tmpfile()
ovl: fix error handling in ovl_verify_set_fh()
Linus Torvalds [Thu, 1 Nov 2018 21:45:38 +0000 (14:45 -0700)]
Merge tag 'devicetree-fixes-for-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
- fix cpu node iterator for powerpc systems
- clarify ARM CPU binding 'capacities-dmips-mhz' property calculations
* tag 'devicetree-fixes-for-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Fix cpu node iterator to not ignore disabled cpu nodes
dt-bindings: arm: Explain capacities-dmips-mhz calculations in example
Linus Torvalds [Thu, 1 Nov 2018 21:42:49 +0000 (14:42 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost updates from Michael Tsirkin:
"Fixes and tweaks:
- virtio balloon page hinting support
- vhost scsi control queue
- misc fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
MAINTAINERS: remove reference to bogus vsock file
vhost/scsi: Use common handling code in request queue handler
vhost/scsi: Extract common handling code from control queue handler
vhost/scsi: Respond to control queue operations
vhost/scsi: truncate T10 PI iov_iter to prot_bytes
virtio-balloon: VIRTIO_BALLOON_F_PAGE_POISON
mm/page_poison: expose page_poisoning_enabled to kernel modules
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT
kvm_config: add CONFIG_VIRTIO_MENU
Linus Torvalds [Thu, 1 Nov 2018 21:32:43 +0000 (14:32 -0700)]
Merge tag 'xtensa-20181101' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes and cleanups from Max Filippov:
- use ZONE_NORMAL instead of ZONE_DMA
- fix Image.elf build error caused by assignment of incorrect address
to the .note.Linux section
- clean up debug and property sections in the vmlinux.lds.S
* tag 'xtensa-20181101' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: clean up xtensa-specific property sections
xtensa: use DWARF_DEBUG in the vmlinux.lds.S
xtensa: add NOTES section to the linker script
xtensa: remove ZONE_DMA
Rob Herring [Wed, 31 Oct 2018 14:28:06 +0000 (09:28 -0500)]
of: Fix cpu node iterator to not ignore disabled cpu nodes
In most cases, nodes with 'status = "disabled";' are treated as if the
node is not present though it is a common bug to forget to check that.
However, cpu nodes are different in that "disabled" simply means offline
and the OS can bring the CPU core online. Commit f1f207e43b8a ("of: Add
cpu node iterator for_each_of_cpu_node()") followed the common behavior
of ignoring disabled cpu nodes. This breaks some powerpc systems (at
least NXP P50XX/e5500). Fix this by dropping the status check.
Fixes: 651d44f9679c ("of: use for_each_of_cpu_node iterator") Fixes: f1f207e43b8a ("of: Add cpu node iterator for_each_of_cpu_node()") Reported-by: Christian Zigotzky <[email protected]> Tested-by: Michael Ellerman <[email protected]> Cc: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
Cong Wang [Thu, 1 Nov 2018 19:02:37 +0000 (12:02 -0700)]
net: drop skb on failure in ip_check_defrag()
Most callers of pskb_trim_rcsum() simply drop the skb when
it fails, however, ip_check_defrag() still continues to pass
the skb up to stack. This is suspicious.
In ip_check_defrag(), after we learn the skb is an IP fragment,
passing the skb to callers makes no sense, because callers expect
fragments are defrag'ed on success. So, dropping the skb when we
can't defrag it is reasonable.
Note, prior to commit 88078d98d1bb, this is not a big problem as
checksum will be fixed up anyway. After it, the checksum is not
correct on failure.
Linus Torvalds [Thu, 1 Nov 2018 18:46:27 +0000 (11:46 -0700)]
Merge tag 'stackleak-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull stackleak gcc plugin from Kees Cook:
"Please pull this new GCC plugin, stackleak, for v4.20-rc1. This plugin
was ported from grsecurity by Alexander Popov. It provides efficient
stack content poisoning at syscall exit. This creates a defense
against at least two classes of flaws:
- Uninitialized stack usage. (We continue to work on improving the
compiler to do this in other ways: e.g. unconditional zero init was
proposed to GCC and Clang, and more plugin work has started too).
- Stack content exposure. By greatly reducing the lifetime of valid
stack contents, exposures via either direct read bugs or unknown
cache side-channels become much more difficult to exploit. This
complements the existing buddy and heap poisoning options, but
provides the coverage for stacks.
The x86 hooks are included in this series (which have been reviewed by
Ingo, Dave Hansen, and Thomas Gleixner). The arm64 hooks have already
been merged through the arm64 tree (written by Laura Abbott and
reviewed by Mark Rutland and Will Deacon).
With VLAs having been removed this release, there is no need for
alloca() protection, so it has been removed from the plugin"
* tag 'stackleak-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: Drop unneeded stackleak_check_alloca()
stackleak: Allow runtime disabling of kernel stack erasing
doc: self-protection: Add information about STACKLEAK feature
fs/proc: Show STACKLEAK metrics in the /proc file system
lkdtm: Add a test for STACKLEAK
gcc-plugins: Add STACKLEAK plugin for tracking the kernel stack
x86/entry: Add STACKLEAK erasing the kernel stack at the end of syscalls
Paul Burton [Thu, 1 Nov 2018 17:51:34 +0000 (17:51 +0000)]
SUNRPC: Use atomic(64)_t for seq_send(64)
The seq_send & seq_send64 fields in struct krb5_ctx are used as
atomically incrementing counters. This is implemented using cmpxchg() &
cmpxchg64() to implement what amount to custom versions of
atomic_fetch_inc() & atomic64_fetch_inc().
Besides the duplication, using cmpxchg64() has another major drawback in
that some 32 bit architectures don't provide it. As such commit 571ed1fd2390 ("SUNRPC: Replace krb5_seq_lock with a lockless scheme")
resulted in build failures for some architectures.
Change seq_send to be an atomic_t and seq_send64 to be an atomic64_t,
then use atomic(64)_* functions to manipulate the values. The atomic64_t
type & associated functions are provided even on architectures which
lack real 64 bit atomic memory access via CONFIG_GENERIC_ATOMIC64 which
uses spinlocks to serialize access. This fixes the build failures for
architectures lacking cmpxchg64().
A potential alternative that was raised would be to provide cmpxchg64()
on the 32 bit architectures that currently lack it, using spinlocks.
However this would provide a version of cmpxchg64() with semantics a
little different to the implementations on architectures with real 64
bit atomics - the spinlock-based implementation would only work if all
access to the memory used with cmpxchg64() is *always* performed using
cmpxchg64(). That is not currently a requirement for users of
cmpxchg64(), and making it one seems questionable. As such avoiding
cmpxchg64() outside of architecture-specific code seems best,
particularly in cases where atomic64_t seems like a better fit anyway.
The CONFIG_GENERIC_ATOMIC64 implementation of atomic64_* functions will
use spinlocks & so faces the same issue, but with the key difference
that the memory backing an atomic64_t ought to always be accessed via
the atomic64_* functions anyway making the issue moot.
Linus Torvalds [Thu, 1 Nov 2018 16:27:57 +0000 (09:27 -0700)]
Merge branch 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou:
"Two small things for v4.20.
The first fixes a clang uninitialized variable warning for arm64 in
the default path calls BUILD_BUG(). The second removes an unnecessary
unlikely() in a WARN_ON() use"
* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
arm64: percpu: Initialize ret in the default case
mm: percpu: remove unnecessary unlikely()
3) FDB only works for ethernet devices, reject attempts to install FDB
rules for others. From Ido Schimmel.
4) Fix spectre V1 in vhost, from Jason Wang.
5) Don't pass on-stack object to irq_set_affinity_hint() in mvpp2
driver, from Marc Zyngier.
6) Fix mlx5e checksum handling when RXFCS is enabled, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
openvswitch: Fix push/pop ethernet validation
net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
bpf: test make sure to run unpriv test cases in test_verifier
bpf: add various test cases to test_verifier
bpf: don't set id on after map lookup with ptr_to_map_val return
bpf: fix partial copy of map_ptr when dst is scalar
libbpf: Fix compile error in libbpf_attach_type_by_name
kselftests/bpf: use ping6 as the default ipv6 ping binary if it exists
selftests: mlxsw: qos_mc_aware: Add a test for UC awareness
selftests: mlxsw: qos_mc_aware: Tweak for min shaper
mlxsw: spectrum: Set minimum shaper on MC TCs
mlxsw: reg: QEEC: Add minimum shaper fields
net: hns3: bugfix for rtnl_lock's range in the hclgevf_reset()
net: hns3: bugfix for rtnl_lock's range in the hclge_reset()
net: hns3: bugfix for handling mailbox while the command queue reinitialized
net: hns3: fix incorrect return value/type of some functions
net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read
net: hns3: bugfix for is_valid_csq_clean_head()
net: hns3: remove unnecessary queue reset in the hns3_uninit_all_ring()
net: hns3: bugfix for the initialization of command queue's spin lock
...
Pull sparc fixes from David Miller:
"Two small fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Wire up compat getpeername and getsockname.
sparc64: Remvoe set_fs() from perf_callchain_user().
Linus Torvalds [Thu, 1 Nov 2018 15:42:21 +0000 (08:42 -0700)]
Merge tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
- Move the Dell dcdbas and dell_rbu drivers into platform/drivers/x86
as they are closely coupled with other drivers in this location.
- Improve _init* usage for acerhdf and fix some usage issues with
messages and module parameters.
- Simplify asus-wmi by calling ACPI/WMI methods directly, eliminating
workqueue overhead, eliminate double reporting of keyboard backlight.
- Fix wake from USB failure on Bay Trail devices (intel_int0002_vgpio).
- Notify intel_telemetry users when IPC1 device is not enabled.
- Update various drivers with new laptop model IDs.
- Update several intel drivers to use SPDX identifers and order headers
alphabetically.
* tag 'platform-drivers-x86-v4.20-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
HID: asus: only support backlight when it's not driven by WMI
platform/x86: asus-wmi: export function for evaluating WMI methods
platform/x86: asus-wmi: Only notify kbd LED hw_change by fn-key pressed
platform/x86: wmi: declare device_type structure as constant
platform/x86: ideapad: Add Y530-15ICH to no_hw_rfkill
platform/x86: Add Intel AtomISP2 dummy / power-management driver
platform/x86: touchscreen_dmi: Add min-x and min-y settings for various models
platform/x86: touchscreen_dmi: Add info for the Onda V80 Plus v3 tablet
platform/x86: touchscreen_dmi: Add info for the Trekstor Primetab T13B tablet
platform/x86: intel_telemetry: Get rid of custom macro
platform/x86: intel_telemetry: report debugfs failure
MAINTAINERS: intel_telemetry: Update maintainers info
platform/x86: Add LG Gram laptop special features driver
platform/x86: asus-wmi: Simplify the keyboard brightness updating process
platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11 convertible
platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items
MAINTAINERS: intel_pmc_core: Update MAINTAINERS
firmware: dcdbas: include linux/io.h
platform/x86: intel-wmi-thunderbolt: Add dynamic debugging
platform/x86: intel-wmi-thunderbolt: Convert to use SPDX identifier
...
Petr Vorel [Mon, 29 Oct 2018 21:10:58 +0000 (22:10 +0100)]
merge_config.sh: Allow to define config prefix
with CONFIG_ environment variable.
merge_config.sh uses CONFIG_ which is used in kernel and other projects.
There are some projects which use kconfig with different prefixes (e.g.
buildroot: BR2_ prefix). CONFIG_ variable is already used for this
purpose in kconfig binary (scripts/kconfig/lkc.h), let's use the same
rule for in merge_config.sh.
Various powerpc boards select the PCI_MSI config option without selecting
PCI, resulting in potentially not compilable configurations if the by
default enabled PCI option is disabled. Explicitly select PCI to ensure
we always have valid configs.
drm/amdgpu: Fix skipping hangged job reset during gpu recover.
Problem:
During GPU recover DAL would hang in
amdgpu_pm_compute_clocks->amdgpu_fence_wait_empty
Fix:
Turns out there was a typo introduced by 3320b8d drm/amdgpu: remove job->ring which caused skipping
amdgpu_fence_driver_force_completion and so the hangged job
was never force signaled and this would cause the hang later in DAL.
Since IDT PCIe-switch temperature sensor is now always available
irregardless of the EEPROM/BIOS settings, Kconfig and in-code
description should be properly altered. In addition lets update
the driver copyright lines.
IDT PCIe-switch temperature sensor interface is very broken. First
of all only a few combinations of TMPCTL threshold enable bits
really cause the interrupts unmasked. Even if an individual bit
indicates the event unmasked, corresponding IRQ just isn't generated.
Most of the threshold enable bits combinations are in fact useless and
non of them can help to create a fully functional alarm interface.
So to speak, we can't create a well defined hwmon alarms based on
the IDT PCI-switch threshold IRQs.
Secondly a single threshold IRQ (not a combination of thresholds) can
be successfully enabled without the issue described above. But in this
case we experienced an enormous number of interrupts generated by
the chip if the temperature got near the enabled threshold value. Filter
adjustment didn't help much. It also doesn't provide a hysteresis settings.
Due to the temperature sample fluctuations near the threshold the
interrupts spate makes the system nearly unusable until the temperature
value finally settled so being pushed either to be fully higher or lower
the threshold.
All of these issues makes the temperature sensor alarm interface useless
and even at some point dangerous to be used in the driver. In this case
it is safer to completely discard it and disable the temperature alarm
interrupts.
IDT PCIe switches provide an embedded temperature sensor working
within [0; 127.5]C with resolution of 0.5C. They also can generate
a PCIe upstream interrupt in case if the temperature passes through
specified thresholds. Since this thresholds interface is very broken
the created hwmon-sysfs interface exposes only the next set of hwmon
nodes: current input temperature, lowest and highest values measured,
history resetting, value offset. HWmon alarm interface isn't provided.
IDT PCIe switch also've got an ADC/filter settings of the sensor.
This driver doesn't expose them to the hwmon-sysfs interface at the
moment, except the offset node.
In order to create a hwmon interface for the IDT PCIe-switch temperature
sensor the already available reader method should be improved. Particularly
we need to redesign it so one would be able to read temperature/offset
values from registers of the passed types. Since IDT sensor interface
provides temperature in unsigned format 0:7:1 (7 bits for real value
and one for fraction) we also need to have helpers for the typical sysfs
temperature data type conversion to and from this format. Even though
the IDT PCIe-switch provided temperature offset got the same but signed
type it can be translated by these methods too.
Dmitry Safonov [Fri, 12 Oct 2018 13:42:53 +0000 (14:42 +0100)]
compat: Cleanup in_compat_syscall() callers
Now that in_compat_syscall() is consistent on all architectures and does
not longer report true on native i686, the workarounds (ifdeffery and
helpers) can be removed.
As seen, the result of in_compat_syscall() on generic 32-bit platform
differs from i686.
There is no reason for in_compat_syscall() == true on native i686. It also
easy to misread code if the result on native 32-bit platform differs
between arches.
Because of that non arch-specific code has many places with:
if (IS_ENABLED(CONFIG_COMPAT) && in_compat_syscall())
in different variations.
It looks-like the only non-x86 code which uses in_compat_syscall() not
under CONFIG_COMPAT guard is in amd/amdkfd. But according to the commit a18069c132cb ("amdkfd: Disable support for 32-bit user processes"), it
actually should be disabled on native i686.
Rename in_compat_syscall() to in_32bit_syscall() for x86-specific code
and make in_compat_syscall() false under !CONFIG_COMPAT.
A follow on patch will clean up generic users which were forced to check
IS_ENABLED(CONFIG_COMPAT) with in_compat_syscall().
Michael Kelley [Thu, 1 Nov 2018 00:35:05 +0000 (00:35 +0000)]
irq/matrix: Fix memory overallocation
IRQ_MATRIX_SIZE is the number of longs needed for a bitmap, multiplied by
the size of a long, yielding a byte count. But it is used to size an array
of longs, which is way more memory than is needed.
Change IRQ_MATRIX_SIZE so it is just the number of longs needed and the
arrays come out the correct size.
When there are both pop and push ethernet header actions among the
actions to be applied to a packet, an unexpected EINVAL (Invalid
argument) error is obtained. This is due to mac_proto not being reset
correctly when those actions are validated.
Reported-at:
https://mail.openvswitch.org/pipermail/ovs-discuss/2018-October/047554.html Fixes: 91820da6ae85 ("openvswitch: add Ethernet push and pop actions") Signed-off-by: Jaime Caamaño Ruiz <[email protected]> Tested-by: Greg Rose <[email protected]> Reviewed-by: Greg Rose <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Niklas Cassel [Wed, 31 Oct 2018 15:08:10 +0000 (16:08 +0100)]
net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC,
or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set.
The only exception is CONFIG_STMMAC_PCI.
When calling of_mdiobus_register(), it will call our ->reset()
callback, which is set to stmmac_mdio_reset().
Most of the code in stmmac_mdio_reset() is protected by a
"#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate
to false when CONFIG_STMMAC_PLATFORM=m.
Because of this, the phy reset gpio will only be pulled when
stmmac is built as built-in, but not when built as modules.
Fix this by using "#if IS_ENABLED()" instead of "#if defined()".
David S. Miller [Thu, 1 Nov 2018 01:30:21 +0000 (18:30 -0700)]
sparc64: Wire up compat getpeername and getsockname.
Fixes: 8b30ca73b7cc ("sparc: Add all necessary direct socket system calls.") Reported-by: Joseph Myers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Thu, 1 Nov 2018 01:21:37 +0000 (18:21 -0700)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2018-10-31
This series contains a various collection of fixes.
Miroslav Lichvar from Red Hat or should I say IBM now? Updates the PHC
timecounter interval for igb so that it gets updated at least once
every 550 seconds.
Ngai-Mint provides a fix for fm10k to prevent a soft lockup or system
crash by adding a new condition to determine if the SM mailbox is in the
correct state before proceeding.
Jake provides several fm10k fixes, first one marks complier aborts as
non-fatal since on some platforms trigger machine check errors when the
compile aborts. Added missing device ids to the in-kernel driver. Due
to the recent fixes, bumped the driver version.
I (Jeff Kirsher) fixed a XFRM_ALGO dependency for both ixgbe and
ixgbevf. This fix was based on the original work from Arnd Bergmann,
which only fixed ixgbe.
Mitch provides a fix for i40e/avf to update the status codes, which
resolves an issue between a mis-match between i40e and the iavf driver,
which also supports the ice LAN driver.
Radoslaw fixes the ixgbe where the driver is logging a message about
spoofed packets detected when the VF is re-started with a different MAC
address.
====================
Aaron Sierra [Mon, 15 Oct 2018 20:32:47 +0000 (15:32 -0500)]
ntb_netdev: Simplify remove with client device drvdata
Replace the elaborate private structure global linked-list used in
ntb_netdev_probe() and ntb_netdev_remove() by stashing our private
data in the NTB transport client device.
Aaron Sierra [Fri, 12 Oct 2018 20:35:03 +0000 (15:35 -0500)]
NTB: transport: Try harder to alloc an aligned MW buffer
Be a little wasteful if the (likely CMA) message window buffer is not
suitably aligned after our first attempt; allocate a buffer twice as big
as we need and manually align our MW buffer within it.
This was needed on Intel Broadwell DE platforms with intel_iommu=off
IDT NTB driver sets the upper limit of actual translation address
being written to the corresponding memory window setup. It is achieved
by BARLIMITx register initialization. Needless to say, that the register
works within PCIe bus address space.
In general CPU and PCIe address spaces are different. It means,
that addresses used for Memory TLPs routine can be different from
CPU addresses. While in most of cases they are the same, there are
exceptions when the proper mapping must be performed to have the
portable driver code. There used to be a virt_to_bus()/bus_to_virt()
interface for this purpose. But it's deprecated now. It was also a
mistake to use pci_resource_start() since the return address of the
method is at the CPU address space. In order to achieve the desired
purpose we need to use pci_bus_address() helper. This method shall
return a PCIe bus base address of the corresponding BAR resource.
Daniel Borkmann [Wed, 31 Oct 2018 23:05:55 +0000 (00:05 +0100)]
bpf: test make sure to run unpriv test cases in test_verifier
Right now unprivileged tests are never executed as a BPF test run,
only loaded. Allow for running them as well so that we can check
the outcome and probe for regressions.
Daniel Borkmann [Wed, 31 Oct 2018 23:05:53 +0000 (00:05 +0100)]
bpf: don't set id on after map lookup with ptr_to_map_val return
In the verifier there is no such semantics where registers with
PTR_TO_MAP_VALUE type have an id assigned to them. This is only
used in PTR_TO_MAP_VALUE_OR_NULL and later on nullified once the
test against NULL has been pattern matched and type transformed
into PTR_TO_MAP_VALUE.
Daniel Borkmann [Wed, 31 Oct 2018 23:05:52 +0000 (00:05 +0100)]
bpf: fix partial copy of map_ptr when dst is scalar
ALU operations on pointers such as scalar_reg += map_value_ptr are
handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr
and range in the register state share a union, so transferring state
through dst_reg->range = ptr_reg->range is just buggy as any new
map_ptr in the dst_reg is then truncated (or null) for subsequent
checks. Fix this by adding a raw member and use it for copying state
over to dst_reg.
Linus Torvalds [Wed, 31 Oct 2018 23:47:55 +0000 (16:47 -0700)]
Merge tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome-platform updates from Benson Leung:
- Move mfd/cros_ec_lpc* includes to drivers/platform from mfd
- Adding a new interrupt path for cros_ec_lpc
* tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: chromeos_tbmc - Remove unneeded const
platform/chrome: Add a new interrupt path for cros_ec_lpc
mfd: cros_ec: Fix and improve kerneldoc comments.
platform/chrome: Move mfd/cros_ec_lpc* includes to drivers/platform.
Charles Keepax [Fri, 19 Oct 2018 08:59:58 +0000 (09:59 +0100)]
i2c: Clear client->irq in i2c_device_remove
The IRQ will be mapped in i2c_device_probe only if client->irq is zero and
i2c_device_remove does not clear this. When rebinding an I2C device,
whos IRQ provider has also been rebound this means that an IRQ mapping
will never be created, causing the I2C device to fail to acquire its
IRQ. Fix this issue by clearing client->irq in i2c_device_remove,
forcing i2c_device_probe to lookup the mapping again.
Charles Keepax [Fri, 19 Oct 2018 08:59:57 +0000 (09:59 +0100)]
i2c: Remove unnecessary call to irq_find_mapping
irq_create_mapping calls irq_find_mapping internally and will use the
found mapping if one exists, so there is no need to manually call this
from i2c_smbus_host_notify_to_irq.
ip_set_create() and ip_set_net_init() attempt to allocate physically
contiguous memory for ip_set_list. If memory is fragmented, the
allocations could easily fail:
Eric Westbrook [Tue, 28 Aug 2018 21:14:42 +0000 (15:14 -0600)]
netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net
Allow /0 as advertised for hash:net,port,net sets.
For "hash:net,port,net", ipset(8) says that "either subnet
is permitted to be a /0 should you wish to match port
between all destinations."
Make that statement true.
Before:
# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid
# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
ipset v6.34: The value of the CIDR parameter of the IP address is invalid
After:
# ipset create cidrzero hash:net,port,net
# ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
# ipset test cidrzero 192.168.205.129,12345,172.16.205.129
192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero.
# ipset create cidrzero6 hash:net,port,net family inet6
# ipset add cidrzero6 ::/0,12345,::/0
# ipset test cidrzero6 fe80::1,12345,ff00::1
fe80::1,tcp:12345,ff00::1 is in set cidrzero6.
netfilter: ipset: list:set: Decrease refcount synchronously on deletion and replace
Commit 45040978c899 ("netfilter: ipset: Fix set:list type crash
when flush/dump set in parallel") postponed decreasing set
reference counters to the RCU callback.
An 'ipset del' command can terminate before the RCU grace period
is elapsed, and if sets are listed before then, the reference
counter shown in userspace will be wrong:
# ipset create h hash:ip; ipset create l list:set; ipset add l
# ipset del l h; ipset list h
Name: h
Type: hash:ip
Revision: 4
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 88
References: 1
Number of entries: 0
Members:
# sleep 1; ipset list h
Name: h
Type: hash:ip
Revision: 4
Header: family inet hashsize 1024 maxelem 65536
Size in memory: 88
References: 0
Number of entries: 0
Members:
Fix this by making the reference count update synchronous again.
As a result, when sets are listed, ip_set_name_byindex() might
now fetch a set whose reference count is already zero. Instead
of relying on the reference count to protect against concurrent
set renaming, grab ip_set_ref_lock as reader and copy the name,
while holding the same lock in ip_set_rename() as writer
instead.
Reported-by: Li Shuang <[email protected]> Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
projects / linux.git / log