Lucas Stach [Mon, 5 Aug 2019 15:51:53 +0000 (17:51 +0200)]
dma-direct: don't truncate dma_required_mask to bus addressing capabilities
The dma required_mask needs to reflect the actual addressing capabilities
needed to handle the whole system RAM. When truncated down to the bus
addressing capabilities dma_addressing_limited() will incorrectly signal
no limitations for devices which are restricted by the bus_dma_mask.
The new DMA_ATTR_NO_KERNEL_MAPPING needs to actually assign
a dma_addr to work. Also skip it if the architecture needs
forced decryption handling, as that needs a kernel virtual
address.
Fixes: d98849aff879 (dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code) Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Lucas Stach <[email protected]>
Linus Torvalds [Sat, 10 Aug 2019 17:21:25 +0000 (10:21 -0700)]
Merge tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Delay acquisition of regmaps in the Aspeed G5 driver.
- Make a symbol static to reduce compiler noise.
* tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aspeed: Make aspeed_pinmux_ips static
pinctrl: aspeed-g5: Delay acquisition of regmaps
Linus Torvalds [Sat, 10 Aug 2019 17:17:19 +0000 (10:17 -0700)]
Merge tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix, a revert of a commit that was meant to be a minor
improvement to some inline asm, but ended up having no real benefit
with GCC and broke booting 32-bit machines when using Clang.
Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick
Desaulniers, Segher Boessenkool"
* tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: slightly improve cache helpers"
Linus Torvalds [Sat, 10 Aug 2019 17:10:33 +0000 (10:10 -0700)]
Merge tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fall-through fixes from Gustavo A. R. Silva:
"Mark more switch cases where we are expecting to fall through, fixing
fall-through warnings in arm, sparc64, mips, i386 and s390"
* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
Viresh Kumar [Wed, 7 Aug 2019 07:06:01 +0000 (12:36 +0530)]
cpufreq: schedutil: Don't skip freq update when limits change
To avoid reducing the frequency of a CPU prematurely, we skip reducing
the frequency if the CPU had been busy recently.
This should not be done when the limits of the policy are changed, for
example due to thermal throttling. We should always get the frequency
within the new limits as soon as possible.
Trying to fix this by using only one flag, i.e. need_freq_update, can
lead to a race condition where the flag gets cleared without forcing us
to change the frequency at least once. And so this patch introduces
another flag to avoid that race condition.
Wenwen Wang [Sat, 10 Aug 2019 04:29:48 +0000 (23:29 -0500)]
ALSA: hda - Fix a memory leak bug
In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc().
Then, the pin widgets in 'codec' are parsed. However, if the parsing
process fails, 'spec' is not deallocated, leading to a memory leak.
To fix the above issue, free 'spec' before returning the error.
Linus Torvalds [Sat, 10 Aug 2019 03:31:04 +0000 (20:31 -0700)]
Merge tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- revive single target %.ko
- do not create built-in.a where it is unneeded
- do not create modules.order where it is unneeded
- show a warning if subdir-y/m is used to visit a module Makefile
* tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: show hint if subdir-y/m is used to visit module Makefile
kbuild: generate modules.order only in directories visited by obj-y/m
kbuild: fix false-positive need-builtin calculation
kbuild: revive single target %.ko
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: arm-ep93xx_defconfig arm):
arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do':
arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may
fall through [-Wimplicit-fallthrough=]
memset(crunch_state, 0, sizeof(*crunch_state));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-ep93xx/crunch.c:53:2: note: here
case THREAD_NOTIFY_EXIT:
^~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: rpc_defconfig arm):
drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’:
drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
^
drivers/scsi/arm/fas216.c:919:2: note: here
default: /* huh? */
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_kick’:
drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_allocate_tag(info, SCpnt);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1960:2: note: here
case TYPE_OTHER:
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’:
drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1414:2: note: here
case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */
^~~~
drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1425:2: note: here
case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’:
drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
^
drivers/scsi/arm/fas216.c:1579:2: note: here
default:
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’:
drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
info->scsi.phase = PHASE_MSGOUT_EXPECT;
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:607:2: note: here
case async:
^~~~
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: db1xxx_defconfig mips):
drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
video: fbdev: omapfb_main: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: omap1_defconfig arm):
drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
watchdog: riowd: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: sparc64):
drivers/watchdog/riowd.c: In function ‘riowd_ioctl’:
drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
riowd_writereg(p, riowd_timeout, WDTO_INDEX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/watchdog/riowd.c:139:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: s390):
drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’:
drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->changed_side == 1) {
^
drivers/s390/net/ctcm_fsms.c:1707:2: note: here
case MPCG_STATE_XID0IOWAIX:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’:
drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (callback)
^
drivers/s390/net/ctcm_mpc.c:360:2: note: here
case MPCG_STATE_XID0IOWAIT:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’:
drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) &&
^
drivers/s390/net/ctcm_mpc.c:1472:2: note: here
default:
^~~~~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’:
drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->estconnfunc) {
^
drivers/s390/net/ctcm_mpc.c:2092:2: note: here
case MPCG_STATE_FLOWC:
^~~~
drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’:
drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (IS_OSN(card)) {
^
drivers/s390/net/qeth_l2_main.c:337:3: note: here
default:
^~~~~~~
crypto: ux500/crypt: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’:
drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_4_r = readl_relaxed(&src_reg->key_4_r);
drivers/crypto/ux500/cryp/cryp.c:318:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_3_r = readl_relaxed(&src_reg->key_3_r);
drivers/crypto/ux500/cryp/cryp.c:322:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_2_r = readl_relaxed(&src_reg->key_2_r);
drivers/crypto/ux500/cryp/cryp.c:326:2: note: here
default:
^~~~~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_4_r, ®->key_4_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:365:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_3_r, ®->key_3_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:369:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_2_r, ®->key_2_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:373:2: note: here
default:
^~~~~~~
watchdog: wdt977: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’:
LD [M] drivers/media/platform/vicodec/vicodec.o
drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
wdt977_keepalive();
^~~~~~~~~~~~~~~~~~
drivers/watchdog/wdt977.c:403:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
watchdog: scx200_wdt: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: i386):
drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’:
drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
scx200_wdt_ping();
^~~~~~~~~~~~~~~~~
drivers/watchdog/scx200_wdt.c:189:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/watchdog/ar7_wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 237:3
drivers/watchdog/pcwd.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 653:3
drivers/watchdog/sb_wdog.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 204:3
drivers/watchdog/wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 391:3
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/kernel/signal.c: In function 'do_signal':
arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
restart -= 2;
~~~~~~~~^~~~
arch/arm/kernel/signal.c:599:3: note: here
case -ERESTARTNOHAND:
^~~~
mfd: omap-usb-host: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume':
drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i])) {
^
drivers/mfd/omap-usb-host.c:313:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend':
drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i]))
^
drivers/mfd/omap-usb-host.c:349:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
mfd: db8500-prcmu: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate':
drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1593:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI_2:
^~~~
drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1595:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI:
^~~~
ARM: OMAP: dma: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode':
arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:393:2: note: here
case OMAP_DMA_DATA_BURST_16:
^~~~
arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:402:2: note: here
default:
^~~~~~~
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode':
arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:481:2: note: here
default:
^~~~~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
ARM: alignment: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/mm/alignment.c: In function 'thumb2arm':
arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((tinstr & (3 << 9)) == 0x0400) {
^
arch/arm/mm/alignment.c:700:2: note: here
default:
^~~~~~~
arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler':
arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
poffset->un = (tinst2 & 0xff) << 2;
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mm/alignment.c:754:2: note: here
case 0xe940:
^~~~
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable':
arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
tegra_cpu_reset_handler_set(reset_address);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-tegra/reset.c:74:2: note: here
case 0:
^~~~
ARM/hw_breakpoint: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse':
arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
^
arch/arm/kernel/hw_breakpoint.c:611:2: note: here
case 3:
^~~~
arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
^
arch/arm/kernel/hw_breakpoint.c:615:2: note: here
default:
^~~~~~~
arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info':
arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
^
arch/arm/kernel/hw_breakpoint.c:547:2: note: here
default:
^~~~~~~
In file included from include/linux/kernel.h:11,
from include/linux/list.h:9,
from include/linux/preempt.h:11,
from include/linux/hardirq.h:5,
from arch/arm/kernel/hw_breakpoint.c:16:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending':
include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely'
unlikely(__ret_warn_on); \
^~~~~~~~
arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN'
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
^~~~
arch/arm/kernel/hw_breakpoint.c:864:2: note: here
case ARM_ENTRY_SYNC_WATCHPOINT:
^~~~
arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore':
arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (oslsr & ARM_OSLSR_OSLM0)
^
arch/arm/kernel/hw_breakpoint.c:912:2: note: here
default:
^~~~~~~
Linus Torvalds [Fri, 9 Aug 2019 22:46:29 +0000 (15:46 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes (arm and x86) and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Adding config fragments
KVM: selftests: Update gitignore file for latest changes
kvm: remove unnecessary PageReserved check
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
KVM: arm: Don't write junk to CP15 registers on reset
KVM: arm64: Don't write junk to sysregs on reset
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block
x86: kvm: remove useless calls to kvm_para_available
KVM: no need to check return value of debugfs_create functions
KVM: remove kvm_arch_has_vcpu_debugfs()
KVM: Fix leak vCPU's VMCS value into other pCPU
KVM: Check preempted_in_kernel for involuntary preemption
KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire
arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC
KVM: arm: vgic-v3: Mark expected switch fall-through
arm64: KVM: regmap: Fix unexpected switch fall-through
KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
Given that the setup path initializes pgmap->ref, arrange for it to be
also torn down so devm_memremap_pages() is ready to be called again and
not be mistaken for the 3rd-party per-cpu-ref case.
Masahiro Yamada [Thu, 8 Aug 2019 11:21:11 +0000 (20:21 +0900)]
kbuild: show hint if subdir-y/m is used to visit module Makefile
Since commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead
of $(MODVERDIR)/*.mod"), a module is no longer built in the following
pattern:
[Makefile]
subdir-y := some-module
[some-module/Makefile]
obj-m := some-module.o
You cannot write Makefile this way in upstream because modules.order is
not correctly generated. subdir-y is used to descend to a sub-directory
that builds tools, device trees, etc.
For external modules, the modules order does not matter. So, the
Makefile above was known to work.
I believe the Makefile should be re-written as follows:
[Makefile]
obj-m := some-module/
[some-module/Makefile]
obj-m := some-module.o
However, people will have no idea if their Makefile suddenly stops
working. In fact, I received questions from multiple people.
Show a warning for a while if obj-m is specified in a Makefile visited
by subdir-y or subdir-m.
I touched the %/ rule to avoid false-positive warnings for the single
target.
Masahiro Yamada [Tue, 6 Aug 2019 10:03:22 +0000 (19:03 +0900)]
kbuild: generate modules.order only in directories visited by obj-y/m
The modules.order files in directories visited by the chain of obj-y
or obj-m are merged to the upper-level ones, and become parts of the
top-level modules.order. On the other hand, there is no need to
generate modules.order in directories visited by subdir-y or subdir-m
since they would become orphan anyway.
Masahiro Yamada [Fri, 2 Aug 2019 10:23:58 +0000 (19:23 +0900)]
kbuild: revive single target %.ko
I removed the single target %.ko in commit ff9b45c55b26 ("kbuild:
modpost: read modules.order instead of $(MODVERDIR)/*.mod") because
the modpost stage does not work reliably. For instance, the module
dependency, modversion, etc. do not work if we lack symbol information
from the other modules.
Yet, some people still want to build only one module in their interest,
and it may be still useful if it is used within those limitations.
Fixes: ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") Reported-by: Don Brace <[email protected]> Reported-by: Arend Van Spriel <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
amdgpu:
- fix VCN to handle the latest navi10 firmware
- fix for fan control on navi10
- properly handle SMU metrics table on navi10
- fix a resume regression on Stoney
- kfd revert a GWS ioctl
vmwgfx:
- memory leak fix
rockchip:
- suspend fix"
* tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: fix memory leak when too many retries have occurred
Revert "drm/amdkfd: New IOCTL to allocate queue GWS"
Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"
drm/amdgpu: pin the csb buffer on hw init for gfx v8
drm/rockchip: Suspend DP late
drm/i915: Fix wrong escape clock divisor init for GLK
drm/i915: fix possible memory leak in intel_hdcp_auth_downstream()
drm/modes: Fix unterminated strncpy
drm/amd/powerplay: correct navi10 vcn powergate
drm/amd/powerplay: honor hw limit on fetching metrics data for navi10
drm/amd/powerplay: Allow changing of fan_control in smu_v11_0
drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0
drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commands
drm/tegra: Fix gpiod_get_from_of_node() regression
Linus Torvalds [Fri, 9 Aug 2019 16:30:00 +0000 (09:30 -0700)]
Merge tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Map vdso also for statically linked binaries like all other
architectures.
- Fix no .bss usage compile-time check to account common objects with
the help of binutils size tool. Top level Makefile change acked-by
Masahiro.
- A fix to make perf happy with _etext symbol type.
- Fix dump_pagetables which is broken since p*d_offset implementation
change to comply with mm/gup.c expectations.
- Revert memory sharing for diag calls in protected virtualization,
since this is not required after all.
- Couple of other minor code cleanups.
* tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vdso: map vdso also for statically linked binaries
s390/build: use size command to perform empty .bss check
kbuild: add OBJSIZE variable for the size tool
s390: put _stext and _etext into .text section
s390/head64: cleanup unused labels
s390/unwind: remove stack recursion warning
s390/setup: adjust start_code of init_mm to _text
s390/mm: fix dump_pagetables top level page table walking
s390/protvirt: avoid memory sharing for diag 308 set/store
Linus Torvalds [Fri, 9 Aug 2019 16:28:18 +0000 (09:28 -0700)]
Merge tag 'for-linus-20190809' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert of a bcache patch that caused an oops for some (Coly)
- ata rb532 unused warning fix (Gustavo)
- AoE kernel crash fix (He)
- Error handling fixup for blkdev_get() (Jan)
- libata read/write translation and SFF PIO fix (me)
- Use after free and error handling fix for O_DIRECT fragments. There's
still a nowait + sync oddity in there, we'll nail that start next
week. If all else fails, I'll queue a revert of the NOWAIT change.
(me)
- Two BFQ regression fixes that caused crashes (Paolo)
* tag 'for-linus-20190809' of git://git.kernel.dk/linux-block:
bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"
loop: set PF_MEMALLOC_NOIO for the worker thread
bdev: Fixup error handling in blkdev_get()
block, bfq: handle NULL return value by bfq_init_rq()
block, bfq: move update of waker and woken list to queue freeing
block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
block: aoe: Fix kernel crash due to atomic sleep when exiting
libata: add SG safety checks in SFF pio transfers
libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
block: fix O_DIRECT error handling for bio fragments
ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe
Linus Torvalds [Fri, 9 Aug 2019 16:26:47 +0000 (09:26 -0700)]
Merge tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- cavium: Fix DMA support
- sdhci-sprd: Fix soft reset when runtime resuming"
* tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: cavium: Add the missing dma unmap when the dma has finished.
mmc: cavium: Set the correct dma max segment size for mmc_host
mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming
Linus Torvalds [Fri, 9 Aug 2019 16:24:49 +0000 (09:24 -0700)]
Merge tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux
Pull fbdev fix from Bartlomiej Zolnierkiewicz:
"fbdev patches will now go to upstream through drm-misc tree for
improved maintainership and better integration testing so update
MAINTAINERS file accordingly"
* tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux:
MAINTAINERS: handle fbdev changes through drm-misc tree
Linus Torvalds [Fri, 9 Aug 2019 16:23:23 +0000 (09:23 -0700)]
Merge tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"A single fix for a backlight brightness regression introduced in
this merge window"
* tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fallback to the static lookup-list when acpi_pwm_get fails
Linus Torvalds [Fri, 9 Aug 2019 16:18:36 +0000 (09:18 -0700)]
Merge tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Revert a recent PCI power management change that caused problems to
occur on multiple systems (Mika Westerberg)"
* tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI: Add missing link delays required by the PCIe spec"
Linus Torvalds [Fri, 9 Aug 2019 16:17:05 +0000 (09:17 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a number of bugs in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore tag length when decrypting GCM ciphertext
crypto: ccp - Add support for valid authsize values less than 16
crypto: ccp - Fix oops by properly managing allocated structures
It turns out that the current version of gfs2_metadata_walker suffers
from multiple problems that can cause gfs2_hole_size to report an
incorrect size. This will confuse fiemap as well as lseek with the
SEEK_DATA flag.
Fix that by changing gfs2_hole_walker to compute the metapath to the
first data block after the hole (if any), and compute the hole size
based on that.
Lu Baolu [Tue, 6 Aug 2019 00:14:09 +0000 (08:14 +0800)]
iommu/vt-d: Fix possible use-after-free of private domain
Multiple devices might share a private domain. One real example
is a pci bridge and all devices behind it. When remove a private
domain, make sure that it has been detached from all devices to
avoid use-after-free case.
Lu Baolu [Tue, 6 Aug 2019 00:14:08 +0000 (08:14 +0800)]
iommu/vt-d: Detach domain before using a private one
When the default domain of a group doesn't work for a device,
the iommu driver will try to use a private domain. The domain
which was previously attached to the device must be detached.
Robin Murphy [Mon, 29 Jul 2019 16:46:00 +0000 (17:46 +0100)]
iommu/dma: Handle SG length overflow better
Since scatterlist dimensions are all unsigned ints, in the relatively
rare cases where a device's max_segment_size is set to UINT_MAX, then
the "cur_len + s_length <= max_len" check in __finalise_sg() will always
return true. As a result, the corner case of such a device mapping an
excessively large scatterlist which is mergeable to or beyond a total
length of 4GB can lead to overflow and a bogus truncated dma_length in
the resulting segment.
As we already assume that any single segment must be no longer than
max_len to begin with, this can easily be addressed by reshuffling the
comparison.
Lu Baolu [Sat, 20 Jul 2019 02:01:26 +0000 (10:01 +0800)]
iommu/vt-d: Correctly check format of page table in debugfs
PASID support and enable bit in the context entry isn't the right
indicator for the type of tables (legacy or scalable mode). Check
the DMA_RTADDR_SMT bit in the root context pointer instead.
Paolo Bonzini [Fri, 9 Aug 2019 14:53:50 +0000 (16:53 +0200)]
Merge tag 'kvmarm-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.3, take #2
- Fix our system register reset so that we stop writing
non-sensical values to them, and track which registers
get reset instead.
- Sync VMCR back from the GIC on WFI so that KVM has an
exact vue of PMR.
- Reevaluate state of HW-mapped, level triggered interrupts
on enable.
MAINTAINERS: handle fbdev changes through drm-misc tree
fbdev patches will now go to upstream through drm-misc tree (IOW
starting with v5.4 merge window fbdev changes will be included in
DRM pull request) for improved maintainership and better integration
testing. Update MAINTAINERS file accordingly.
In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at
the end of list is necessary. Remove the NULL from last element of each
lists will cause the following panic,
Hans Verkuil [Fri, 9 Aug 2019 08:32:40 +0000 (10:32 +0200)]
omap-dma/omap_vout_vrfb: fix off-by-one fi value
The OMAP 4 TRM specifies that when using double-index addressing
the address increases by the ES plus the EI value minus 1 within
a frame. When a full frame is transferred, the address increases
by the ES plus the frame index (FI) value minus 1.
The omap-dma code didn't account for the 'minus 1' in the FI register.
To get correct addressing, add 1 to the src_icg value.
This was found when testing a hacked version of the media m2m-deinterlace.c
driver on a Pandaboard.
The only other source that uses this feature is omap_vout_vrfb.c,
and that adds a + 1 when setting the dst_icg. This is a workaround
for the broken omap-dma.c behavior. So remove the workaround at the
same time that we fix omap-dma.c.
I tested the omap_vout driver with a Beagle XM board to check that
the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma
bug.
Takashi Iwai [Fri, 9 Aug 2019 09:23:00 +0000 (11:23 +0200)]
ALSA: hda - Apply workaround for another AMD chip 1022:1487
MSI MPG X570 board is with another AMD HD-audio controller (PCI ID
1022:1487) and it requires the same workaround applied for X370, etc
(PCI ID 1022:1457).
Heiko Carstens [Wed, 7 Aug 2019 12:31:59 +0000 (14:31 +0200)]
s390/vdso: map vdso also for statically linked binaries
s390 does not map the vdso for statically linked binaries, assuming
that this doesn't make sense. See commit fc5243d98ac2 ("[S390]
arch_setup_additional_pages arguments").
However with glibc commit d665367f596d ("linux: Enable vDSO for static
linking as default (BZ#19767)") and commit 5e855c895401 ("s390: Enable
VDSO for static linking") the vdso is also used for statically linked
binaries - if the kernel would make it available.
Therefore map the vdso always, just like all other architectures.
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
A HW mapped level sensitive interrupt asserted by a device will not be put
into the ap_list if it is disabled at the VGIC level. When it is enabled
again, it will be inserted into the ap_list and written to a list register
on guest entry regardless of the state of the device.
We could argue that this can also happen on real hardware, when the command
to enable the interrupt reached the GIC before the device had the chance to
de-assert the interrupt signal; however, we emulate the distributor and
redistributors in software and we can do better than that.
Marc Zyngier [Mon, 5 Aug 2019 09:34:51 +0000 (10:34 +0100)]
KVM: arm: Don't write junk to CP15 registers on reset
At the moment, the way we reset CP15 registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a CP15 register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the CP15 reg leave outside
of the cp15_regs[] array). It may well be axed in the near future.
Marc Zyngier [Mon, 5 Aug 2019 09:34:51 +0000 (10:34 +0100)]
KVM: arm64: Don't write junk to sysregs on reset
At the moment, the way we reset system registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a system register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something. This requires fixing a couple of
sysreg refinition in the trap table.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the sysregs leave outside of
the sys_regs[] array). It may well be axed in the near future.
Paul Walmsley [Thu, 8 Aug 2019 22:36:44 +0000 (15:36 -0700)]
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
The YAML binding document for SiFive boards has an incorrect
compatible string for the HiFive Unleashed board. Change it to match
the name of the board on the SiFive web site:
https://www.sifive.com/boards/hifive-unleashed
which also matches the contents of the board DT data file:
Palmer Dabbelt [Wed, 7 Aug 2019 00:05:08 +0000 (17:05 -0700)]
RISC-V: Remove udivdi3
This should never have landed in the first place: it was added as part
of 64-bit divide support for 32-bit systems, but the kernel doesn't
allow this sort of division. I must have forgotten to remove it.
This patch removes the support. Since this routine only worked on
64-bit platforms but was only built on 32-bit platforms, it's
essentially just nonsense anyway.
Paul Walmsley [Wed, 7 Aug 2019 01:28:33 +0000 (18:28 -0700)]
riscv: delay: use do_div() instead of __udivdi3()
In preparation for removing __udivdi3() from the RISC-V
architecture-specific files, convert its one user to use do_div().
This avoids breaking the RV32 build after __udivdi3() is removed.
This second version removes the assignment of the remainder to an
unused temporary variable. Thanks to Nicolas Pitre <[email protected]>
for the suggestion.
Atish Patra [Sat, 3 Aug 2019 04:27:23 +0000 (21:27 -0700)]
dt-bindings: Update the riscv,isa string description
Since the RISC-V specification states that ISA description strings are
case-insensitive, there's no functional difference between mixed-case,
upper-case, and lower-case ISA strings. Thus, to simplify parsing,
specify that the letters present in "riscv,isa" must be all lowercase.
Linus Torvalds [Thu, 8 Aug 2019 21:47:19 +0000 (14:47 -0700)]
Merge tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- NFSv4: Ensure we check the return value of update_open_stateid() so
we correctly track active open state.
- NFSv4: Fix for delegation state recovery to ensure we recover all
open modes that are active.
- NFSv4: Fix an Oops in nfs4_do_setattr
Fixes:
- NFS: Fix regression whereby fscache errors are appearing on 'nofsc'
mounts
- NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
- NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
- pNFS: Report errors from the call to nfs4_select_rw_stateid()
- NFSv4: Various other delegation and open stateid recovery fixes
- NFSv4: Fix state recovery behaviour when server connection times
out"
* tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Ensure state recovery handles ETIMEDOUT correctly
NFS: Fix regression whereby fscache errors are appearing on 'nofsc' mounts
NFSv4: Fix an Oops in nfs4_do_setattr
NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
NFSv4: Check the return value of update_open_stateid()
NFSv4.1: Only reap expired delegations
NFSv4.1: Fix open stateid recovery
NFSv4: Report the error from nfs4_select_rw_stateid()
NFSv4: When recovering state fails with EAGAIN, retry the same recovery
NFSv4: Print an error in the syslog when state is marked as irrecoverable
NFSv4: Fix delegation state recovery
NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
Thomas Gleixner [Thu, 8 Aug 2019 20:12:01 +0000 (22:12 +0200)]
Merge tag 'perf-urgent-for-mingo-5.3-20190808' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
perf/urgent fixes:
db-export:
Adrian Hunter:
- Fix thread__exec_comm() picking of main thread COMM for pre-existing,
synthesized from /proc data records.
annotate:
Arnaldo Carvalho de Melo:
- Fix printing of unaugmented disassembled instructions from BPF, some
lines were leaving leftovers from the previous screen, due to use of
newlines by binutils's libopcode disassembler.
perf ftrace:
He Zhe:
- Fix cpumask problems when only one CPU is present.
PMU events:
Jin Yao:
- Add missing "cpu_clk_unhalted.core" event.
perf bench:
Jiri Olsa:
- Fix cpu0 binding in the NUMA benchmarks.
s390:
Thomas Richter:
- Fix module size calculations.
build system:
Masanari Iida:
- Fix a typo in a variable name in the Documentation Makefile
The events defined in pmu-events JSON are parsed and added into perf
tool. For fixed counters, we handle the encodings between JSON and perf
by using a static array fixed[].
But the fixed[] has missed an important event "cpu_clk_unhalted.core".
For example, on the Tremont platform,
[root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a
event syntax error: 'cpu_clk_unhalted.core'
\___ parser error
With this patch, the event cpu_clk_unhalted.core can be parsed.
[root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv
------------------------------------------------------------
perf_event_attr:
type 4
size 112
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
...
On s390 the kernel is located around memory address 0x200, 0x10000 or
0x100000, depending on linux version. Modules however start some- where
around 0x3ff xxxx xxxx.
This is different than x86 and produces a large gap for which histogram
allocation fails.
Fix this by detecting the kernel's last symbol and do no adjustment for
it. Introduce a weak function and handle s390 specifics.
There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).
The location of the GOT/relocation table at the beginning of a module is
unique to s390.
commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:
The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990. This end
address overlaps with the next modules start address of 0x3ff800d85a0.
When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:
0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000
which is the same as
0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.
To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.
Ian Rogers [Wed, 31 Jul 2019 22:54:41 +0000 (15:54 -0700)]
perf tools: Fix include paths in ui directory
These paths point to the wrong location but still work because they get
picked up by a -I flag that happens to direct to the correct file. Fix
paths to point to the correct location without -I flags.
He Zhe [Fri, 2 Aug 2019 08:29:51 +0000 (16:29 +0800)]
perf ftrace: Fix failure to set cpumask when only one cpu is present
The buffer containing the string used to set cpumask is overwritten at
the end of the string later in cpu_map__snprint_mask due to not enough
memory space, when there is only one cpu.
And thus causes the following failure:
$ perf ftrace ls
failed to reset ftrace
$
This patch fixes the calculation of the cpumask string size.
Adrian Hunter [Thu, 8 Aug 2019 06:48:23 +0000 (09:48 +0300)]
perf db-export: Fix thread__exec_comm()
Threads synthesized from /proc have comms with a start time of zero, and
not marked as "exec". Currently, there can be 2 such comms. The first is
created by processing a synthesized fork event and is set to the
parent's comm string, and the second by processing a synthesized comm
event set to the thread's current comm string.
In the absence of an "exec" comm, thread__exec_comm() picks the last
(oldest) comm, which, in the case above, is the parent's comm string.
For a main thread, that is very probably wrong. Use the second-to-last
in that case.
This affects only db-export because it is the only user of
thread__exec_comm().
Example:
$ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
$ sudo chown ahunter pt-a-sleep-1
perf annotate: Fix printing of unaugmented disassembled instructions from BPF
The code to disassemble BPF programs uses binutil's disassembling
routines, and those use in turn fprintf to print to a memstream FILE,
adding a newline at the end of each line, which ends up confusing the
TUI routines called from:
The SLsmg_vprintf() function in the slang library gets confused with the
terminating newline, so make the disasm_line__parse() function that
parses the lines produced by the BPF specific disassembler (that uses
binutil's libopcodes) and the lines produced by the objdump based
disassembler used for everything else (and that doesn't adds this
terminating newline) trim the end of the line in addition of the
beginning.
This way when disasm_line->ops.raw, i.e. for instructions without a
special scnprintf() method, we'll not have that \n getting in the way of
filling the screen right after the instruction with spaces to avoid
leaving what was on the screen before and thus garbling the annotation
screen, breaking scrolling, etc.
The root cause is in _vm_normal_page, without the PTE_SPECIAL bit,
the return value will be incorrectly set to pfn_to_page(pfn) instead
of NULL. Besides, this patch also rewrite the pmd_mkdevmap to avoid
setting PTE_SPECIAL for pmd
The MAP_SYNC test case is as follows(Provided by Yibo Cai)
$#include <stdio.h>
$#include <string.h>
$#include <unistd.h>
$#include <sys/file.h>
$#include <sys/mman.h>
Linus Torvalds [Thu, 8 Aug 2019 16:57:50 +0000 (09:57 -0700)]
Merge tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six small SMB3 fixes, two for stable"
* tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Kernel oops mounting a encryptData share with CONFIG_DEBUG_VIRTUAL
smb3: update TODO list of missing features
smb3: send CAP_DFS capability during session setup
SMB3: Fix potential memory leak when processing compound chain
SMB3: Fix deadlock in validate negotiate hits reconnect
cifs: fix rmmod regression in cifs.ko caused by force_sig changes
usb: setup authorized_default attributes using usb_bus_notify
Currently, the authorized_default and interface_authorized_default
attributes for HCD are set up after the uevent has been sent to userland.
This creates a race condition where userland may fail to access this
file when processing the event. Move the appending of these attributes
earlier relying on the usb_bus_notify dispatcher.
Jan Kara [Wed, 7 Aug 2019 09:36:47 +0000 (11:36 +0200)]
bdev: Fixup error handling in blkdev_get()
Commit 89e524c04fa9 ("loop: Fix mount(2) failure due to race with
LOOP_SET_FD") converted blkdev_get() to use the new helpers for
finishing claiming of a block device. However the conversion botched the
error handling in blkdev_get() and thus the bdev has been marked as held
even in case __blkdev_get() returned error. This led to occasional
warnings with block/001 test from blktests like:
kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0
Jia-Ju Bai [Mon, 29 Jul 2019 02:08:49 +0000 (10:08 +0800)]
dmaengine: stm32-mdma: Fix a possible null-pointer dereference in stm32_mdma_irq_handler()
In stm32_mdma_irq_handler(), chan is checked on line 1368.
When chan is NULL, it is still used on line 1369:
dev_err(chan2dev(chan), "MDMA channel not initialized\n");
Thus, a possible null-pointer dereference may occur.
To fix this bug, "dev_dbg(mdma2dev(dmadev), ...)" is used instead.
Paolo Valente [Wed, 7 Aug 2019 17:21:11 +0000 (19:21 +0200)]
block, bfq: handle NULL return value by bfq_init_rq()
As reported in [1], the call bfq_init_rq(rq) may return NULL in case
of OOM (in particular, if rq->elv.icq is NULL because memory
allocation failed in failed in ioc_create_icq()).
Paolo Valente [Wed, 7 Aug 2019 14:17:54 +0000 (16:17 +0200)]
block, bfq: move update of waker and woken list to queue freeing
Since commit 13a857a4c4e8 ("block, bfq: detect wakers and
unconditionally inject their I/O"), every bfq_queue has a pointer to a
waker bfq_queue and a list of the bfq_queues it may wake. In this
respect, when a bfq_queue, say Q, remains with no I/O source attached
to it, Q cannot be woken by any other bfq_queue, and cannot wake any
other bfq_queue. Then Q must be removed from the woken list of its
possible waker bfq_queue, and all bfq_queues in the woken list of Q
must stop having a waker bfq_queue.
Q remains with no I/O source in two cases: when the last process
associated with Q exits or when such a process gets associated with a
different bfq_queue. Unfortunately, commit 13a857a4c4e8 ("block, bfq:
detect wakers and unconditionally inject their I/O") performed the
above updates only in the first case.
This commit fixes this bug by moving these updates to when Q gets
freed. This is a simple and safe way to handle all cases, as both the
above events, process exit and re-association, lead to Q being freed
soon, and because dangling references would come out only after Q gets
freed (if no update were performed).
Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <[email protected]> Tested-by: Douglas Anderson <[email protected]> Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Paolo Valente [Wed, 7 Aug 2019 14:17:53 +0000 (16:17 +0200)]
block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
Since commit 13a857a4c4e8 ("block, bfq: detect wakers and
unconditionally inject their I/O"), BFQ stores, in a per-device
pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O
request completed. If some bfq_queue receives new I/O right after the
last request of last_completed_rq_bfqq has been completed, then
last_completed_rq_bfqq may be a waker bfq_queue.
But if the bfq_queue last_completed_rq_bfqq points to is freed, then
last_completed_rq_bfqq becomes a dangling reference. This commit
resets last_completed_rq_bfqq if the pointed bfq_queue is freed.
Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <[email protected]> Tested-by: Douglas Anderson <[email protected]> Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Vasily Gorbik [Mon, 21 Jan 2019 12:54:53 +0000 (13:54 +0100)]
s390/build: use size command to perform empty .bss check
Currently empty .bss checks performed do not pay attention to "common
objects" in object files which end up in .bss section eventually.
The "size" tool is a part of binutils and since version 2.18 provides
"--common" command line option, which allows to account "common objects"
sizes in .bss section size. Utilize "size --common" to perform accurate
check that .bss section is unused. Besides that the size tool handles
object files without .bss section gracefully and doesn't require
additional objdump run.
The linux kernel requires binutils 2.20 since 4.13.
Kbuild exports OBJSIZE to reference the right size tool.
Vasily Gorbik [Mon, 21 Jan 2019 12:54:39 +0000 (13:54 +0100)]
kbuild: add OBJSIZE variable for the size tool
Define and export OBJSIZE variable for "size" tool from binutils to be
used in architecture specific Makefiles (naming the variable just "SIZE"
would be too risky). In particular this tool is useful to perform checks
that early boot code is not using bss section (which might have not been
zeroed yet or intersects with initrd or other files boot loader might
have put right after the linux kernel).
Hans de Goede [Tue, 30 Jul 2019 15:48:48 +0000 (17:48 +0200)]
pwm: Fallback to the static lookup-list when acpi_pwm_get fails
Commit 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI")
made pwm_get unconditionally return the acpi_pwm_get return value if
the device passed to pwm_get has an ACPI fwnode.
But even if the passed in device has an ACPI fwnode, it does not
necessarily have the necessary ACPI package defining its pwm bindings,
especially since the binding / API of this ACPI package has only been
introduced very recently.
Up until now X86/ACPI devices which use a separate pwm controller for
controlling their LCD screen's backlight brightness have been relying
on the static lookup-list to get their pwm.
pwm_get unconditionally returning the acpi_pwm_get return value breaks
this, breaking backlight control on these devices.
This commit fixes this by making pwm_get fall back to the static
lookup-list if acpi_pwm_get returns -ENOENT.
projects / linux.git / log