Git Repo - linux.git/log

Merge branch 'virtio-vsock-fix-memory-leaks'

Michal Luczaj says:

====================
virtio/vsock: Fix memory leaks

Short series fixing some memory leaks that I've stumbled upon while toying
with the selftests.

Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================

Link: https://patch.msgid.link/20241107-vsock-mem-leaks-v2-0-4e21bfcfc818@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio/vsock: Improve MSG_ZEROCOPY error handling

Add a missing kfree_skb() to prevent memory leaks.

Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

vsock: Fix sk_error_queue memory leak

Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.

unreferenced object 0xffff8881028beb00 (size 224):
  comm "vsock_test", pid 1218, jiffies 4294694897
  hex dump (first 32 bytes):
    90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff  ..!.......!.....
    00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff  ..........!.....
  backtrace (crc 6c7031ca):
    [<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370
    [<ffffffff81d35882>] __alloc_skb+0x132/0x180
    [<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80
    [<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240
    [<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0
    [<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50
    [<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450
    [<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0
    [<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0
    [<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80
    [<ffffffff820d3df3>] do_syscall_64+0x93/0x180
    [<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e

Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio/vsock: Fix accept_queue memory leak

As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.

vsock_release
  __vsock_release
    lock
    virtio_transport_release
      virtio_transport_close
        schedule_delayed_work(close_work)
    sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
    release
                                        virtio_transport_recv_pkt
                                          vsock_find_bound_socket
                                          lock
                                          if flag(SOCK_DONE) return
                                          virtio_transport_recv_listen
                                            child = vsock_create_connected
                                      (!)   vsock_enqueue_accept(child)
                                          release
close_work
  lock
  virtio_transport_do_close
    set_flag(SOCK_DONE)
    virtio_transport_remove_sock
      vsock_remove_sock
        vsock_remove_bound
  release

Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.

unreferenced object 0xffff888109e3f800 (size 2040):
  comm "kworker/5:2", pid 371, jiffies 4294940105
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00  (..@............
  backtrace (crc 9e5f4e84):
    [<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
    [<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
    [<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
    [<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
    [<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
    [<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
    [<ffffffff810fc6ac>] process_one_work+0x20c/0x570
    [<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
    [<ffffffff811070dd>] kthread+0xdd/0x110
    [<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
    [<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30

Fixes: 3fe356d58efa ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'mlx5-misc-fixes-2024-11-07'

Tariq Toukan says:

====================
mlx5 misc fixes 2024-11-07

This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================

Link: https://patch.msgid.link/20241107183527.676877-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Disable loopback self-test on multi-PF netdev

In Multi-PF (Socket Direct) configurations, when a loopback packet is
sent through one of the secondary devices, it will always be received
on the primary device. This causes the loopback layer to fail in
identifying the loopback packet as the devices are different.

To avoid false test failures, disable the loopback self-test in
Multi-PF configurations.

Fixes: ed29705e4ed1 ("net/mlx5: Enable SD feature")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: CT: Fix null-ptr-deref in add rule err flow

In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add()
callback returns error, zone_rule->attr is used uninitiated. Fix it to
use attr which has the needed pointer value.

Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000110
RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
…
Call Trace:
  <TASK>
  ? __die+0x20/0x70
  ? page_fault_oops+0x150/0x3e0
  ? exc_page_fault+0x74/0x140
  ? asm_exc_page_fault+0x22/0x30
  ? mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core]
  ? mlx5_tc_ct_entry_add_rule+0x1d5/0x2f0 [mlx5_core]
  mlx5_tc_ct_block_flow_offload+0xc6a/0xf90 [mlx5_core]
  ? nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table]
  nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table]
  flow_offload_work_handler+0x142/0x320 [nf_flow_table]
  ? finish_task_switch.isra.0+0x15b/0x2b0
  process_one_work+0x16c/0x320
  worker_thread+0x28c/0x3a0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xb8/0xf0
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x2d/0x50
  ? __pfx_kthread+0x10/0x10
  ret_from_fork_asm+0x1a/0x30
  </TASK>

Fixes: 7fac5c2eced3 ("net/mlx5: CT: Avoid reusing modify header context for natted entries")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: clear xdp features on non-uplink representors

Non-uplink representor port does not support XDP. The patch clears
the xdp feature by checking the net_device_ops.ndo_bpf is set or not.

Verify using the netlink tool:
$ tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump dev-get

Representor netdev before the patch:
{'ifindex': 8,
  'xdp-features': {'basic',
                   'ndo-xmit',
                   'ndo-xmit-sg',
                   'redirect',
                   'rx-sg',
                   'xsk-zerocopy'},
  'xdp-rx-metadata-features': set(),
  'xdp-zc-max-segs': 1,
  'xsk-features': set()},
With the patch:
{'ifindex': 8,
  'xdp-features': set(),
  'xdp-rx-metadata-features': set(),
  'xsk-features': set()},

Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: kTLS, Fix incorrect page refcounting

The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.

This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.

This was found while doing kTLS testing with sendfile() + ZC when the
served file was read from NFS on a kernel with NFS large folios support
(commit 49b29a573da8 ("nfs: add support for large folios")).

Fixes: 84d1bb2b139e ("net/mlx5e: kTLS, Limit DUMP wqe size")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: fs, lock FTE when checking if active

The referenced commits introduced a two-step process for deleting FTEs:

- Lock the FTE, delete it from hardware, set the hardware deletion function
  to NULL and unlock the FTE.
- Lock the parent flow group, delete the software copy of the FTE, and
  remove it from the xarray.

However, this approach encounters a race condition if a rule with the same
match value is added simultaneously. In this scenario, fs_core may set the
hardware deletion function to NULL prematurely, causing a panic during
subsequent rule deletions.

To prevent this, ensure the active flag of the FTE is checked under a lock,
which will prevent the fs_core layer from attaching a new steering rule to
an FTE that is in the process of deletion.

[  438.967589] MOSHE: 2496 mlx5_del_flow_rules del_hw_func
[  438.968205] ------------[ cut here ]------------
[  438.968654] refcount_t: decrement hit 0; leaking memory.
[  438.969249] WARNING: CPU: 0 PID: 8957 at lib/refcount.c:31 refcount_warn_saturate+0xfb/0x110
[  438.970054] Modules linked in: act_mirred cls_flower act_gact sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core zram zsmalloc fuse [last unloaded: cls_flower]
[  438.973288] CPU: 0 UID: 0 PID: 8957 Comm: tc Not tainted 6.12.0-rc1+ #8
[  438.973888] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  438.974874] RIP: 0010:refcount_warn_saturate+0xfb/0x110
[  438.975363] Code: 40 66 3b 82 c6 05 16 e9 4d 01 01 e8 1f 7c a0 ff 0f 0b c3 cc cc cc cc 48 c7 c7 10 66 3b 82 c6 05 fd e8 4d 01 01 e8 05 7c a0 ff <0f> 0b c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90
[  438.976947] RSP: 0018:ffff888124a53610 EFLAGS: 00010286
[  438.977446] RAX: 0000000000000000 RBX: ffff888119d56de0 RCX: 0000000000000000
[  438.978090] RDX: ffff88852c828700 RSI: ffff88852c81b3c0 RDI: ffff88852c81b3c0
[  438.978721] RBP: ffff888120fa0e88 R08: 0000000000000000 R09: ffff888124a534b0
[  438.979353] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888119d56de0
[  438.979979] R13: ffff888120fa0ec0 R14: ffff888120fa0ee8 R15: ffff888119d56de0
[  438.980607] FS:  00007fe6dcc0f800(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000
[  438.983984] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  438.984544] CR2: 00000000004275e0 CR3: 0000000186982001 CR4: 0000000000372eb0
[  438.985205] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  438.985842] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  438.986507] Call Trace:
[  438.986799]  <TASK>
[  438.987070]  ? __warn+0x7d/0x110
[  438.987426]  ? refcount_warn_saturate+0xfb/0x110
[  438.987877]  ? report_bug+0x17d/0x190
[  438.988261]  ? prb_read_valid+0x17/0x20
[  438.988659]  ? handle_bug+0x53/0x90
[  438.989054]  ? exc_invalid_op+0x14/0x70
[  438.989458]  ? asm_exc_invalid_op+0x16/0x20
[  438.989883]  ? refcount_warn_saturate+0xfb/0x110
[  438.990348]  mlx5_del_flow_rules+0x2f7/0x340 [mlx5_core]
[  438.990932]  __mlx5_eswitch_del_rule+0x49/0x170 [mlx5_core]
[  438.991519]  ? mlx5_lag_is_sriov+0x3c/0x50 [mlx5_core]
[  438.992054]  ? xas_load+0x9/0xb0
[  438.992407]  mlx5e_tc_rule_unoffload+0x45/0xe0 [mlx5_core]
[  438.993037]  mlx5e_tc_del_fdb_flow+0x2a6/0x2e0 [mlx5_core]
[  438.993623]  mlx5e_flow_put+0x29/0x60 [mlx5_core]
[  438.994161]  mlx5e_delete_flower+0x261/0x390 [mlx5_core]
[  438.994728]  tc_setup_cb_destroy+0xb9/0x190
[  438.995150]  fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
[  438.995650]  fl_change+0x11a4/0x13c0 [cls_flower]
[  438.996105]  tc_new_tfilter+0x347/0xbc0
[  438.996503]  ? ___slab_alloc+0x70/0x8c0
[  438.996929]  rtnetlink_rcv_msg+0xf9/0x3e0
[  438.997339]  ? __netlink_sendskb+0x4c/0x70
[  438.997751]  ? netlink_unicast+0x286/0x2d0
[  438.998171]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[  438.998625]  netlink_rcv_skb+0x54/0x100
[  438.999020]  netlink_unicast+0x203/0x2d0
[  438.999421]  netlink_sendmsg+0x1e4/0x420
[  438.999820]  __sock_sendmsg+0xa1/0xb0
[  439.000203]  ____sys_sendmsg+0x207/0x2a0
[  439.000600]  ? copy_msghdr_from_user+0x6d/0xa0
[  439.001072]  ___sys_sendmsg+0x80/0xc0
[  439.001459]  ? ___sys_recvmsg+0x8b/0xc0
[  439.001848]  ? generic_update_time+0x4d/0x60
[  439.002282]  __sys_sendmsg+0x51/0x90
[  439.002658]  do_syscall_64+0x50/0x110
[  439.003040]  entry_SYSCALL_64_after_hwframe+0x76/0x7e

Fixes: 718ce4d601db ("net/mlx5: Consolidate update FTE for all removal changes")
Fixes: cefc23554fc2 ("net/mlx5: Fix FTE cleanup")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix msix vectors to respect platform limit

The number of PCI vectors allocated by the platform (which may be fewer
than requested) is currently not honored when creating the SF pool;
only the PCI MSI-X capability is considered.

As a result, when a platform allocates fewer vectors
(in non-dynamic mode) than requested, the PF and SF pools end up
with an invalid vector range.

This causes incorrect SF vector accounting, which leads to the
following call trace when an invalid IRQ vector is allocated.

This issue is resolved by ensuring that the platform's vector
limit is respected for both the SF and PF pools.

Workqueue: mlx5_vhca_event0 mlx5_sf_dev_add_active_work [mlx5_core]
RIP: 0010:pci_irq_vector+0x23/0x80
RSP: 0018:ffffabd5cebd7248 EFLAGS: 00010246
RAX: ffff980880e7f308 RBX: ffff9808932fb880 RCX: 0000000000000001
RDX: 00000000000001ff RSI: 0000000000000200 RDI: ffff980880e7f308
RBP: 0000000000000200 R08: 0000000000000010 R09: ffff97a9116f0860
R10: 0000000000000002 R11: 0000000000000228 R12: ffff980897cd0160
R13: 0000000000000000 R14: ffff97a920fec0c0 R15: ffffabd5cebd72d0
FS: 0000000000000000(0000) GS:ffff97c7ff9c0000(0000) knlGS:0000000000000000
? rescuer_thread+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core.sf mlx5_core.sf.6: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced)
mlx5_core.sf mlx5_core.sf.7: firmware version: 32.43.356
mlx5_core.sf mlx5_core.sf.6 enpa1s0f0s4: renamed from eth0
mlx5_core.sf mlx5_core.sf.7: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22

Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: E-switch, unload IB representors when unloading ETH representors

IB representors depend on ETH representors, so the IB representors
should not exist without the ETH ones. When unloading the ETH
representors, the corresponding IB representors should be also
unloaded.

The commit 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
introduced the use of the ib_device_set_netdev API in IB
repsresentors. ib_device_set_netdev() increments the refcount of
the representor's netdev when loading an IB representor and
decrements it when unloading.
Without the unloading of the IB representor, the refcount of the
representor's netdev remains greater than 0, preventing it from
being unregistered.
The patch uncovered an underlying bug where the eth representor is
unloaded, without unloading the IB representor.

This issue happened when using multiport E-switch and rebooting,
causing the shutdown to hang when unloading the ETH representor
because the refcount of the representor's netdevice was greater than 0.

Call trace:
unregister_netdevice: waiting for eth3 to become free. Usage count = 2
ref_tracker: eth%d@00000000661d60f7 has 1/1 users at
ib_device_set_netdev+0x160/0x2d0 [ib_core]
mlx5_ib_vport_rep_load+0x104/0x3f0 [mlx5_ib]
mlx5_eswitch_reload_ib_reps+0xfc/0x110 [mlx5_core]
mlx5_mpesw_work+0x236/0x330 [mlx5_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
kthread+0xb8/0xe0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x11/0x20

Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-fix-a-couple-of-races'

Paolo Abeni says:

====================
mptcp: fix a couple of races

The first patch addresses a division by zero issue reported by Eric,
the second one solves a similar issue found by code inspection while
investigating the former.
====================

Link: https://patch.msgid.link/cover.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: cope racing subflow creation in mptcp_rcv_space_adjust

Additional active subflows - i.e. created by the in kernel path
manager - are included into the subflow list before starting the
3whs.

A racing recvmsg() spooling data received on an already established
subflow would unconditionally call tcp_cleanup_rbuf() on all the
current subflows, potentially hitting a divide by zero error on
the newly created ones.

Explicitly check that the subflow is in a suitable state before
invoking tcp_cleanup_rbuf().

Fixes: c76c6956566f ("mptcp: call tcp_cleanup_rbuf on subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: error out earlier on disconnect

Eric reported a division by zero splat in the MPTCP protocol:

Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 6094 Comm: syz-executor317 Not tainted
6.12.0-rc5-syzkaller-00291-g05b92660cdfe #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
RIP: 0010:__tcp_select_window+0x5b4/0x1310 net/ipv4/tcp_output.c:3163
Code: f6 44 01 e3 89 df e8 9b 75 09 f8 44 39 f3 0f 8d 11 ff ff ff e8
0d 74 09 f8 45 89 f4 e9 04 ff ff ff e8 00 74 09 f8 44 89 f0 99 <f7> 7c
24 14 41 29 d6 45 89 f4 e9 ec fe ff ff e8 e8 73 09 f8 48 89
RSP: 0018:ffffc900041f7930 EFLAGS: 00010293
RAX: 0000000000017e67 RBX: 0000000000017e67 RCX: ffffffff8983314b
RDX: 0000000000000000 RSI: ffffffff898331b0 RDI: 0000000000000004
RBP: 00000000005d6000 R08: 0000000000000004 R09: 0000000000017e67
R10: 0000000000003e80 R11: 0000000000000000 R12: 0000000000003e80
R13: ffff888031d9b440 R14: 0000000000017e67 R15: 00000000002eb000
FS: 00007feb5d7f16c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb5d8adbb8 CR3: 0000000074e4c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__tcp_cleanup_rbuf+0x3e7/0x4b0 net/ipv4/tcp.c:1493
mptcp_rcv_space_adjust net/mptcp/protocol.c:2085 [inline]
mptcp_recvmsg+0x2156/0x2600 net/mptcp/protocol.c:2289
inet_recvmsg+0x469/0x6a0 net/ipv4/af_inet.c:885
sock_recvmsg_nosec net/socket.c:1051 [inline]
sock_recvmsg+0x1b2/0x250 net/socket.c:1073
__sys_recvfrom+0x1a5/0x2e0 net/socket.c:2265
__do_sys_recvfrom net/socket.c:2283 [inline]
__se_sys_recvfrom net/socket.c:2279 [inline]
__x64_sys_recvfrom+0xe0/0x1c0 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7feb5d857559
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007feb5d7f1208 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007feb5d8e1318 RCX: 00007feb5d857559
RDX: 000000800000000e RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007feb5d8e1310 R08: 0000000000000000 R09: ffffffff81000000
R10: 0000000000000100 R11: 0000000000000246 R12: 00007feb5d8e131c
R13: 00007feb5d8ae074 R14: 000000800000000e R15: 00000000fffffdef

and provided a nice reproducer.

The root cause is the current bad handling of racing disconnect.
After the blamed commit below, sk_wait_data() can return (with
error) with the underlying socket disconnected and a zero rcv_mss.

Catch the error and return without performing any additional
operations on the current socket.

Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 419ce133ab92 ("tcp: allow again tcp_disconnect() when threads are waiting")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/8c82ecf71662ecbc47bf390f9905de70884c9f2d.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: clarify SO_DEVMEM_DONTNEED behavior in documentation

Document new behavior when the number of frags passed is too big.

Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241107210331.3044434-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: fix SO_DEVMEM_DONTNEED looping too long

Exit early if we're freeing more than 1024 frags, to prevent
looping too long.

Also minor code cleanups:
- Flip checks to reduce indentation.
- Use sizeof(*tokens) everywhere for consistentcy.

Cc: Yi Lai <yi1.lai@linux.intel.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107210331.3044434-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: fix data-races around sk->sk_forward_alloc

Syzkaller reported this warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 16 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x1c5/0x1e0
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.12.0-rc5 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:inet_sock_destruct+0x1c5/0x1e0
Code: 24 12 4c 89 e2 5b 48 c7 c7 98 ec bb 82 41 5c e9 d1 18 17 ff 4c 89 e6 5b 48 c7 c7 d0 ec bb 82 41 5c e9 bf 18 17 ff 0f 0b eb 83 <0f> 0b eb 97 0f 0b eb 87 0f 0b e9 68 ff ff ff 66 66 2e 0f 1f 84 00
RSP: 0018:ffffc9000008bd90 EFLAGS: 00010206
RAX: 0000000000000300 RBX: ffff88810b172a90 RCX: 0000000000000007
RDX: 0000000000000002 RSI: 0000000000000300 RDI: ffff88810b172a00
RBP: ffff88810b172a00 R08: ffff888104273c00 R09: 0000000000100007
R10: 0000000000020000 R11: 0000000000000006 R12: ffff88810b172a00
R13: 0000000000000004 R14: 0000000000000000 R15: ffff888237c31f78
FS:  0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc63fecac8 CR3: 000000000342e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  <TASK>
  ? __warn+0x88/0x130
  ? inet_sock_destruct+0x1c5/0x1e0
  ? report_bug+0x18e/0x1a0
  ? handle_bug+0x53/0x90
  ? exc_invalid_op+0x18/0x70
  ? asm_exc_invalid_op+0x1a/0x20
  ? inet_sock_destruct+0x1c5/0x1e0
  __sk_destruct+0x2a/0x200
  rcu_do_batch+0x1aa/0x530
  ? rcu_do_batch+0x13b/0x530
  rcu_core+0x159/0x2f0
  handle_softirqs+0xd3/0x2b0
  ? __pfx_smpboot_thread_fn+0x10/0x10
  run_ksoftirqd+0x25/0x30
  smpboot_thread_fn+0xdd/0x1d0
  kthread+0xd3/0x100
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x34/0x50
  ? __pfx_kthread+0x10/0x10
  ret_from_fork_asm+0x1a/0x30
  </TASK>
---[ end trace 0000000000000000 ]---

Its possible that two threads call tcp_v6_do_rcv()/sk_forward_alloc_add()
concurrently when sk->sk_state == TCP_LISTEN with sk->sk_lock unlocked,
which triggers a data-race around sk->sk_forward_alloc:
tcp_v6_rcv
    tcp_v6_do_rcv
        skb_clone_and_charge_r
            sk_rmem_schedule
                __sk_mem_schedule
                    sk_forward_alloc_add()
            skb_set_owner_r
                sk_mem_charge
                    sk_forward_alloc_add()
        __kfree_skb
            skb_release_all
                skb_release_head_state
                    sock_rfree
                        sk_mem_uncharge
                            sk_forward_alloc_add()
                            sk_mem_reclaim
                                // set local var reclaimable
                                __sk_mem_reclaim
                                    sk_forward_alloc_add()

In this syzkaller testcase, two threads call
tcp_v6_do_rcv() with skb->truesize=768, the sk_forward_alloc changes like
this:
(cpu 1)             | (cpu 2)             | sk_forward_alloc
...                 | ...                 | 0
__sk_mem_schedule() |                     | +4096 = 4096
                     | __sk_mem_schedule() | +4096 = 8192
sk_mem_charge()     |                     | -768  = 7424
                     | sk_mem_charge()     | -768  = 6656
...                 |    ...              |
sk_mem_uncharge()   |                     | +768  = 7424
reclaimable=7424    |                     |
                     | sk_mem_uncharge()   | +768  = 8192
                     | reclaimable=8192    |
__sk_mem_reclaim()  |                     | -4096 = 4096
                     | __sk_mem_reclaim()  | -8192 = -4096 != 0

The skb_clone_and_charge_r() should not be called in tcp_v6_do_rcv() when
sk->sk_state is TCP_LISTEN, it happens later in tcp_v6_syn_recv_sock().
Fix the same issue in dccp_v6_do_rcv().

Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: e994b2f0fb92 ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20241107023405.889239-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: add netlink-dumps to .gitignore

Commit 55d42a0c3f9c ("selftests: net: add a test for closing
a netlink socket ith dump in progress") added a new test
but did not add it to gitignore.

Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241108004731.2979878-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: vertexcom: mse102x: Fix tx_bytes calculation

The tx_bytes should consider the actual size of the Ethernet frames
without the SPI encapsulation. But we still need to take care of
Ethernet padding.

Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241108114343.6174-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: fix possible UAF in sctp_v6_available()

A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints
that sctp_v6_available() is calling dev_get_by_index_rcu()
and ipv6_chk_addr() without holding rcu.

[1]
=============================
WARNING: suspicious RCU usage
6.12.0-rc5-virtme #1216 Tainted: G        W
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by sctp_hello/31495:
#0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp

stack backtrace:
CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G        W          6.12.0-rc5-virtme #1216
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
  <TASK>
dump_stack_lvl (lib/dump_stack.c:123)
lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7))
sctp_v6_available (net/sctp/ipv6.c:701) sctp
sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp
sctp_bind (net/sctp/socket.c:320) sctp
inet6_bind_sk (net/ipv6/af_inet6.c:465)
? security_socket_bind (security/security.c:4581 (discriminator 1))
__sys_bind (net/socket.c:1848 net/socket.c:1869)
? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340)
? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13))
__x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1))
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f59b934a1e7
Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48
All code
========
   0: 44 00 00              add    %r8b,(%rax)
   3: 48 8b 15 39 8c 0c 00 mov    0xc8c39(%rip),%rdx        # 0xc8c43
   a: f7 d8                 neg    %eax
   c: 64 89 02              mov    %eax,%fs:(%rdx)
   f: b8 ff ff ff ff        mov    $0xffffffff,%eax
  14: eb bd                 jmp    0xffffffffffffffd3
  16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1)
  1d: 00 00 00
  20: 0f 1f 00              nopl   (%rax)
  23: b8 31 00 00 00        mov    $0x31,%eax
  28: 0f 05                 syscall
  2a:* 48 3d 01 f0 ff ff     cmp    $0xfffffffffffff001,%rax <-- trapping instruction
  30: 73 01                 jae    0x33
  32: c3                    ret
  33: 48 8b 0d 09 8c 0c 00 mov    0xc8c09(%rip),%rcx        # 0xc8c43
  3a: f7 d8                 neg    %eax
  3c: 64 89 01              mov    %eax,%fs:(%rcx)
  3f: 48                    rex.W

Code starting with the faulting instruction
===========================================
   0: 48 3d 01 f0 ff ff     cmp    $0xfffffffffffff001,%rax
   6: 73 01                 jae    0x9
   8: c3                    ret
   9: 48 8b 0d 09 8c 0c 00 mov    0xc8c09(%rip),%rcx        # 0xc8c19
  10: f7 d8                 neg    %eax
  12: 64 89 01              mov    %eax,%fs:(%rcx)
  15: 48                    rex.W
RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7
RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005
RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000
R10: 00007f59b9253298 R11: 0000000000000202 R12: 00007ffe2d0ada61
R13: 0000000000000000 R14: 0000562926516dd8 R15: 00007f59b9479000
  </TASK>

Fixes: 6fe1e52490a9 ("sctp: check ipv6 addr with sk_bound_dev if set")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20241107192021.2579789-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: add a test for closing a netlink socket ith dump in progress

Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.

Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.

  TAP version 13
  1..3
  # Starting 3 tests from 1 test cases.
  #  RUN           global.test_sanity ...
  #            OK  global.test_sanity
  ok 1 global.test_sanity
  #  RUN           global.close_in_progress ...
  #            OK  global.close_in_progress
  ok 2 global.close_in_progress
  #  RUN           global.close_with_ref ...
  #            OK  global.close_with_ref
  ok 3 global.close_with_ref
  # PASSED: 3 / 3 tests passed.
  # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0

Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.

Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

netlink: terminate outstanding dump on socket close

Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.

This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.

The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.

Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.

The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.

Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: ed5d7788a934 ("netlink: Do not schedule work from sk_destruct")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241106015235.2458807-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.

  Things are slowing down quite a bit, mostly driver fixes here. No
  known ongoing investigations.

  Current release - new code bugs:

   - eth: ti: am65-cpsw:
      - fix multi queue Rx on J7
      - fix warning in am65_cpsw_nuss_remove_rx_chns()

  Previous releases - regressions:

   - mptcp: do not require admin perm to list endpoints, got missed in a
     refactoring

   - mptcp: use sock_kfree_s instead of kfree

  Previous releases - always broken:

   - sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access

   - virtio_net: make RSS interact properly with queue number

   - can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation

   - can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
     configuration when switching CAN modes

  Misc:

   - revert earlier hns3 fixes, they were ignoring IOMMU abstractions
     and need to be reworked

   - can: {cc770,sja1000}_isa: allow building on x86_64"

* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
  drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
  net/smc: do not leave a dangling sk pointer in __smc_create()
  rxrpc: Fix missing locking causing hanging calls
  net/smc: Fix lookup of netdev by using ib_device_get_netdev()
  net: arc: rockchip: fix emac mdio node support
  net: arc: fix the device for dma_map_single/dma_unmap_single
  virtio_net: Update rss when set queue
  virtio_net: Sync rss config to device when virtnet_probe
  virtio_net: Add hash_key_length check
  virtio_net: Support dynamic rss indirection table size
  netfilter: nf_tables: wait for rcu grace period on net_device removal
  net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
  net: vertexcom: mse102x: Fix possible double free of TX skb
  mptcp: use sock_kfree_s instead of kfree
  mptcp: no admin perm to list endpoints
  net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
  net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
  net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
  net: hns3: fix kernel crash when uninstalling driver
  Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
  ...

drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path

The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.

To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.

Fixes: 0de38d9f1dba ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: do not leave a dangling sk pointer in __smc_create()

Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:

smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS:  000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
  sock_create net/socket.c:1616 [inline]
  __sys_socket_create net/socket.c:1653 [inline]
  __sys_socket+0x150/0x3c0 net/socket.c:1700
  __do_sys_socket net/socket.c:1714 [inline]
  __se_sys_socket net/socket.c:1712 [inline]

For reference, see commit 2d859aff775d ("Merge branch
'do-not-leave-dangling-sk-pointers-in-pf-create-functions'")

Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: D. Wythe <alibuda@linux.alibaba.com>
Cc: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://patch.msgid.link/20241106221922.1544045-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

rxrpc: Fix missing locking causing hanging calls

If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.

Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/smc: Fix lookup of netdev by using ib_device_get_netdev()

The SMC-R variant of the SMC protocol used direct call to function
ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device
driver to run SMC-R, it failed to find a device, because in mlx5_ib the
internal net device management for retrieving net devices was replaced
by a common interface ib_device_get_netdev() in commit 8d159eb2117b
("RDMA/mlx5: Use IB set_netdev and get_netdev functions").

Since such direct accesses to the internal net device management is not
recommended at all, update the SMC-R code to use proper API
ib_device_get_netdev().

Fixes: 54903572c23c ("net/smc: allow pnetid-less configuration")
Reported-by: Aswin K <aswin@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20241106082612.57803-1-wenjia@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux

Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update

  Erik Schumacher found and fixed a problem in the calculation of the
  PWM period setting yielding too long periods. Trevor Gamblin - who
  already cared about mainlining the pwm-axi-pwmgen driver - stepped
  forward as an additional reviewer.

  Thanks to Erik and Trevor"

* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
  MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
  pwm: imx-tpm: Use correct MODULO value for EPWM mode

proc/softirqs: replace seq_printf with seq_put_decimal_ull_width

seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.

Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fix for net

The following series contains a Netfilter fix:

1) Wait for rcu grace period after netdevice removal is reported via event.

* tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: wait for rcu grace period on net_device removal
====================

Link: https://patch.msgid.link/20241107113212.116634-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fix-the-arc-emac-driver'

Andy Yan says:

====================
Fix the arc emac driver

The arc emac driver was broken for a long time,
The first broken happens when a dma releated fix introduced in Linux 5.10.
The second broken happens when a emac device tree node restyle introduced
in Linux 6.1.

These two patches are try to make the arc emac work again.

Changes in v2:
- Add cover letter.
- Add fix tag.
- Add more detail explaination.
====================

Link: https://patch.msgid.link/20241104130147.440125-1-andyshrk@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: arc: rockchip: fix emac mdio node support

The binding emac_rockchip.txt is converted to YAML.
Changed against the original binding is an added MDIO subnode.
This make the driver failed to find the PHY, and given the 'mdio
has invalid PHY address' it is probably looking in the wrong node.
Fix emac_mdio.c so that it can handle both old and new
device trees.

Fixes: 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes")
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Tested-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: arc: fix the device for dma_map_single/dma_unmap_single

The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent
which has dma_mask, ndev->dev.parent is just pdev->dev.
Or it would cause the following issue:

[ 39.933526] ------------[ cut here ]------------
[ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8

Fixes: f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'virtio_net-make-rss-interact-properly-with-queue-number'

Philo Lu says:

====================
virtio_net: Make RSS interact properly with queue number

With this patch set, RSS updates with queue_pairs changing:
- When virtnet_probe, init default rss and commit
- When queue_pairs changes _without_ user rss configuration, update rss
with the new queue number
- When queue_pairs changes _with_ user rss configuration, keep rss as user
configured

Patch 1 and 2 fix possible out of bound errors for indir_table and key.
Patch 3 and 4 add RSS update in probe() and set_queues().
====================

Link: https://patch.msgid.link/20241104085706.13872-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: Update rss when set queue

RSS configuration should be updated with queue number. In particular, it
should be updated when (1) rss enabled and (2) default rss configuration
is used without user modification.

During rss command processing, device updates queue_pairs using
rss.max_tx_vq. That is, the device updates queue_pairs together with
rss, so we can skip the sperate queue_pairs update
(VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET below) and return directly.

Also remove the `vi->has_rss ?` check when setting vi->rss.max_tx_vq,
because this is not used in the other hash_report case.

Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: Sync rss config to device when virtnet_probe

During virtnet_probe, default rss configuration is initialized, but was
not committed to the device. This patch fix this by sending rss command
after device ready in virtnet_probe. Otherwise, the actual rss
configuration used by device can be different with that read by user
from driver, which may confuse the user.

If the command committing fails, driver rss will be disabled.

Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: Add hash_key_length check

Add hash_key_length check in virtnet_probe() to avoid possible out of
bound errors when setting/reading the hash key.

Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

virtio_net: Support dynamic rss indirection table size

When reading/writing virtio_net_ctrl_rss, we get the indirection table
size from vi->rss_indir_table_size, which is initialized in
virtnet_probe(). However, the actual size of indirection_table was set
as VIRTIO_NET_RSS_MAX_TABLE_LEN=128. This collision may cause issues if
the vi->rss_indir_table_size exceeds 128.

This patch instead uses dynamic indirection table, allocated with
vi->rss after vi->rss_indir_table_size initialized. And free it in
virtnet_remove().

In virtnet_commit_rss_command(), sgs for rss is initialized differently
with hash_report. So indirection_table is not used if !vi->has_rss, and
then we don't need to alloc indirection_table for hash_report only uses.

Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

netfilter: nf_tables: wait for rcu grace period on net_device removal

8c873e219970 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.

Note that 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec9d ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").

Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).

Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:

cleanup_net()
  default_device_exit_batch()
   unregister_netdevice_many_notify()
    notifier_call_chain()
     nf_tables_netdev_event()
      __nft_release_basechain()

In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.

While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.

Fixes: 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case

Commit a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by
unbalanced disable_irq_wake calls") introduced checks to prevent
unbalanced enable and disable IRQ wake calls. However it only
initialized the auxiliary variable on one of the paths,
stmmac_request_irq_multi_msi(), missing the other,
stmmac_request_irq_single().

Add the same initialization on stmmac_request_irq_single() to prevent
"Unbalanced IRQ <x> wake disable" warnings from being printed the first
time disable_irq_wake() is called on platforms that run on that code
path.

Fixes: a23aa0404218 ("net: stmmac: ethtool: Fixed calltrace caused by unbalanced disable_irq_wake calls")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101-stmmac-unbalanced-wake-single-fix-v1-1-5952524c97f0@collabora.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: vertexcom: mse102x: Fix possible double free of TX skb

The scope of the TX skb is wider than just mse102x_tx_frame_spi(),
so in case the TX skb room needs to be expanded, we should free the
the temporary skb instead of the original skb. Otherwise the original
TX skb pointer would be freed again in mse102x_tx_work(), which leads
to crashes:

  Internal error: Oops: 0000000096000004 [#2] PREEMPT SMP
  CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G      D            6.6.23
  Hardware name: chargebyte Charge SOM DC-ONE (DT)
  Workqueue: events mse102x_tx_work [mse102x]
  pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : skb_release_data+0xb8/0x1d8
  lr : skb_release_data+0x1ac/0x1d8
  sp : ffff8000819a3cc0
  x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0
  x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff
  x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50
  x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc
  x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000
  x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000
  x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8
  x8 : fffffc00001bc008
  x7 : 0000000000000000 x6 : 0000000000000008
  x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009
  x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000
  Call trace:
   skb_release_data+0xb8/0x1d8
   kfree_skb_reason+0x48/0xb0
   mse102x_tx_work+0x164/0x35c [mse102x]
   process_one_work+0x138/0x260
   worker_thread+0x32c/0x438
   kthread+0x118/0x11c
   ret_from_fork+0x10/0x20
  Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660)

Cc: stable@vger.kernel.org
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241105163101.33216-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client fixes from Anna Schumaker:
"These are mostly fixes that came up during the nfs bakeathon the other
  week.

  Stable Fixes:
   - Fix KMSAN warning in decode_getfattr_attrs()

  Other Bugfixes:
   - Handle -ENOTCONN in xs_tcp_setup_socked()
   - NFSv3: only use NFS timeout for MOUNT when protocols are compatible
   - Fix attribute delegation behavior on exclusive create and a/mtime
     changes
   - Fix localio to cope with racing nfs_local_probe()
   - Avoid i_lock contention in fs_clear_invalid_mapping()"

* tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  nfs: avoid i_lock contention in nfs_clear_invalid_mapping
  nfs_common: fix localio to cope with racing nfs_local_probe()
  NFS: Further fixes to attribute delegation a/mtime changes
  NFS: Fix attribute delegation behaviour on exclusive create
  nfs: Fix KMSAN warning in decode_getfattr_attrs()
  NFSv3: only use NFS timeout for MOUNT when protocols are compatible
  sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()

Merge tag 'keys-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull keys fixes from Jarkko Sakkinen:
"A couple of fixes for keys and trusted keys"

* tag 'keys-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation
security/keys: fix slab-out-of-bounds in key_task_permission

Merge tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.

  Commit 78ff64081949 ("vfs: Convert tracefs to use the new mount API")
  broke the gid setting when set by fstab or other mount utility. It is
  ignored when it is set. Fix the code so that it recognises the option
  again and will honor the settings on mount at boot up.

  Update the internal documentation and create a selftest to make sure
  it doesn't break again in the future"

* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/selftests: Add tracefs mount options test
  tracing: Document tracefs gid mount option
  tracing: Fix tracefs mount options

Merge tag 'platform-drivers-x86-v6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

- AMD PMF: Add new hardware id

- AMD PMC: Fix crash when loaded with enable_stb=1 on devices without STB

- Dell: Add Alienware hwid for Alienware systems with Dell WMI interface

- thinkpad_acpi: Quirk to fix wrong fan speed readings on L480

- New hotkey mappings for Dell and Lenovo laptops

* tag 'platform-drivers-x86-v6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Fix for ThinkPad's with ECFW showing incorrect fan speed
  platform/x86: ideapad-laptop: add missing Ideapad Pro 5 fn keys
  platform/x86: dell-wmi-base: Handle META key Lock/Unlock events
  platform/x86: dell-smbios-base: Extends support to Alienware products
  platform/x86/amd/pmc: Detect when STB is not available
  platform/x86/amd/pmf: Add SMU metrics table support for 1Ah family 60h model

Merge tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mikulas Patocka:

- fix memory safety bugs in dm-cache

- fix restart/panic logic in dm-verity

- fix 32-bit unsigned integer overflow in dm-unstriped

- fix a device mapper crash if blk_alloc_disk fails

* tag 'for-6.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix potential out-of-bounds access on the first resume
  dm cache: optimize dirty bit checking with find_next_bit when resizing
  dm cache: fix out-of-bounds access to the dirty bitset when resizing
  dm cache: fix flushing uninitialized delayed_work on cache_ctr error
  dm cache: correct the number of origin blocks to match the target length
  dm-verity: don't crash if panic_on_corruption is not selected
  dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflow
  dm: fix a crash if blk_alloc_disk fails

Merge tag 'hid-for-linus-20241105' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fix from Jiri Kosina:

- report buffer sanitization fix for HID core (Jiri Kosina)

* tag 'hid-for-linus-20241105' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: zero-initialize the report buffer

platform/x86: thinkpad_acpi: Fix for ThinkPad's with ECFW showing incorrect fan speed

Fix for Thinkpad's with ECFW showing incorrect fan speed. Some models use
decimal instead of hexadecimal for the speed stored in the EC registers.
For example the rpm register will have 0x4200 instead of 0x1068, here
the actual RPM is "4200" in decimal.

Add a quirk to handle this.

Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241105235505.8493-1-vishnuocv@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-11-04 (ice, idpf, i40e, e1000e)

For ice:

Marcin adjusts ordering of calls in ice_eswitch_detach() to resolve a
use after free issue.

Mateusz corrects variable type for Flow Director queue to fix issues
related to drop actions.

For idpf:

Pavan resolves issues related to reset on idpf; avoiding use of freed
vport and correctly unrolling the mailbox task.

For i40e:

Aleksandr fixes a race condition involving addition and deletion of VF
MAC filters.

For e1000e:

Vitaly reverts workaround for Meteor Lake causing regressions in power
management flows.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  e1000e: Remove Meteor Lake SMBUS workarounds
  i40e: fix race condition by adding filter's intermediate sync state
  idpf: fix idpf_vc_core_init error path
  idpf: avoid vport access in idpf_get_link_ksettings
  ice: change q_index variable type to s16 to store -1 value
  ice: Fix use after free during unload with ports in bridge
====================

Link: https://patch.msgid.link/20241104223639.2801097-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-pm-fix-wrong-perm-and-sock-kfree'

Matthieu Baerts says:

====================
mptcp: pm: fix wrong perm and sock kfree

Two small fixes related to the MPTCP path-manager:

- Patch 1: remove an accidental restriction to admin users to list MPTCP
  endpoints. A regression from v6.7.

- Patch 2: correctly use sock_kfree_s() instead of kfree() in the
  userspace PM. A fix for another fix introduced in v6.4 and
  backportable up to v5.19.
====================

Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-0-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: use sock_kfree_s instead of kfree

The local address entries on userspace_pm_local_addr_list are allocated
by sock_kmalloc().

It's then required to use sock_kfree_s() instead of kfree() to free
these entries in order to adjust the allocated size on the sk side.

Fixes: 24430f8bf516 ("mptcp: add address into userspace pm list")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-2-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: no admin perm to list endpoints

During the switch to YNL, the command to list all endpoints has been
accidentally restricted to users with admin permissions.

It looks like there are no reasons to have this restriction which makes
it harder for a user to quickly check if the endpoint list has been
correctly populated by an automated tool. Best to go back to the
previous behaviour then.

mptcp_pm_gen.c has been modified using ynl-gen-c.py:

   $ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
     --spec Documentation/netlink/specs/mptcp_pm.yaml --source \
     -o net/mptcp/mptcp_pm_gen.c

The header file doesn't need to be regenerated.

Fixes: 1d0507f46843 ("net: mptcp: convert netlink from small_ops to ops")
Cc: stable@vger.kernel.org
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: ti: add PHY_RST_AFTER_CLK_EN flag

DP83848 datasheet (section 4.7.2) indicates that the reset pin should be
toggled after the clocks are running. Add the PHY_RST_AFTER_CLK_EN to
make sure that this indication is respected.

In my experience not having this flag enabled would lead to, on some
boots, the wrong MII mode being selected if the PHY was initialized on
the bootloader and was receiving data during Linux boot.

Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 34e45ad9378c ("net: phy: dp83848: Add TI DP83848 Ethernet PHY")
Link: https://patch.msgid.link/20241102151504.811306-1-paissilva@ld-100007.ds1.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-ethernet-ti-am65-cpsw-fixes-to-multi-queue-rx-feature'

Roger Quadros says:

====================
net: ethernet: ti: am65-cpsw: Fixes to multi queue RX feature

On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows. Patch 1 fixes this.

The second patch fixes a warning if there was any error in
am65_cpsw_nuss_init_rx_chns() and am65_cpsw_nuss_cleanup_rx_chns()
was called after that.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
====================

Link: https://patch.msgid.link/20241101-am65-cpsw-multi-rx-j7-fix-v3-0-338fdd6a55da@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()

flow->irq is initialized to 0 which is a valid IRQ. Set it to -EINVAL
in error path of am65_cpsw_nuss_init_rx_chns() so we do not try
to free an unallocated IRQ in am65_cpsw_nuss_remove_rx_chns().

If user tried to change number of RX queues and am65_cpsw_nuss_init_rx_chns()
failed due to any reason, the warning will happen if user tries to change
the number of RX queues after the error condition.

root@am62xx-evm:~# ethtool -L eth0 rx 3
[   40.385293] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19
[   40.393211] am65-cpsw-nuss 8000000.ethernet: Failed to init rx flow2
netlink error: Invalid argument
root@am62xx-evm:~# ethtool -L eth0 rx 2
[   82.306427] ------------[ cut here ]------------
[   82.311075] WARNING: CPU: 0 PID: 378 at kernel/irq/devres.c:144 devm_free_irq+0x84/0x90
[   82.469770] Call trace:
[   82.472208]  devm_free_irq+0x84/0x90
[   82.475777]  am65_cpsw_nuss_remove_rx_chns+0x6c/0xac [ti_am65_cpsw_nuss]
[   82.482487]  am65_cpsw_nuss_update_tx_rx_chns+0x2c/0x9c [ti_am65_cpsw_nuss]
[   82.489442]  am65_cpsw_set_channels+0x30/0x4c [ti_am65_cpsw_nuss]
[   82.495531]  ethnl_set_channels+0x224/0x2dc
[   82.499713]  ethnl_default_set_doit+0xb8/0x1b8
[   82.504149]  genl_family_rcv_msg_doit+0xc0/0x124
[   82.508757]  genl_rcv_msg+0x1f0/0x284
[   82.512409]  netlink_rcv_skb+0x58/0x130
[   82.516239]  genl_rcv+0x38/0x50
[   82.519374]  netlink_unicast+0x1d0/0x2b0
[   82.523289]  netlink_sendmsg+0x180/0x3c4
[   82.527205]  __sys_sendto+0xe4/0x158
[   82.530779]  __arm64_sys_sendto+0x28/0x38
[   82.534782]  invoke_syscall+0x44/0x100
[   82.538526]  el0_svc_common.constprop.0+0xc0/0xe0
[   82.543221]  do_el0_svc+0x1c/0x28
[   82.546528]  el0_svc+0x28/0x98
[   82.549578]  el0t_64_sync_handler+0xc0/0xc4
[   82.553752]  el0t_64_sync+0x190/0x194
[   82.557407] ---[ end trace 0000000000000000 ]---

Fixes: da70d184a8c3 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7

On J7 platforms, setting up multiple RX flows was failing
as the RX free descriptor ring 0 is shared among all flows
and we did not allocate enough elements in the RX free descriptor
ring 0 to accommodate for all RX flows.

This issue is not present on AM62 as separate pair of
rings are used for free and completion rings for each flow.

Fix this by allocating enough elements for RX free descriptor
ring 0.

However, we can no longer rely on desc_idx (descriptor based
offsets) to identify the pages in the respective flows as
free descriptor ring includes elements for all flows.
To solve this, introduce a new swdata data structure to store
flow_id and page. This can be used to identify which flow (page_pool)
and page the descriptor belonged to when popped out of the
RX rings.

Fixes: da70d184a8c3 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: hns3: fix kernel crash when uninstalling driver

When the driver is uninstalled and the VF is disabled concurrently, a
kernel crash occurs. The reason is that the two actions call function
pci_disable_sriov(). The num_VFs is checked to determine whether to
release the corresponding resources. During the second calling, num_VFs
is not 0 and the resource release function is called. However, the
corresponding resource has been released during the first invoking.
Therefore, the problem occurs:

[15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[15278.131557][T50670] Call trace:
[15278.134686][T50670]  klist_put+0x28/0x12c
[15278.138682][T50670]  klist_del+0x14/0x20
[15278.142592][T50670]  device_del+0xbc/0x3c0
[15278.146676][T50670]  pci_remove_bus_device+0x84/0x120
[15278.151714][T50670]  pci_stop_and_remove_bus_device+0x6c/0x80
[15278.157447][T50670]  pci_iov_remove_virtfn+0xb4/0x12c
[15278.162485][T50670]  sriov_disable+0x50/0x11c
[15278.166829][T50670]  pci_disable_sriov+0x24/0x30
[15278.171433][T50670]  hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3]
[15278.178039][T50670]  hclge_exit+0x28/0xd0 [hclge]
[15278.182730][T50670]  __se_sys_delete_module.isra.0+0x164/0x230
[15278.188550][T50670]  __arm64_sys_delete_module+0x1c/0x30
[15278.193848][T50670]  invoke_syscall+0x50/0x11c
[15278.198278][T50670]  el0_svc_common.constprop.0+0x158/0x164
[15278.203837][T50670]  do_el0_svc+0x34/0xcc
[15278.207834][T50670]  el0_svc+0x20/0x30

For details, see the following figure.

     rmmod hclge              disable VFs
----------------------------------------------------
hclge_exit()            sriov_numvfs_store()
  ...                     device_lock()
  pci_disable_sriov()     hns3_pci_sriov_configure()
                            pci_disable_sriov()
                              sriov_disable()
    sriov_disable()             if !num_VFs :
      if !num_VFs :               return;
        return;                 sriov_del_vfs()
      sriov_del_vfs()             ...
        ...                       klist_put()
        klist_put()               ...
        ...                     num_VFs = 0;
      num_VFs = 0;        device_unlock();

In this patch, when driver is removing, we get the device_lock()
to protect num_VFs, just like sriov_numvfs_store().

Fixes: 0dd8a25f355b ("net: hns3: disable sriov before unload hclge layer")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241101091507.3644584-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"

This reverts commit d80a3091308491455b6501b1c4b68698c4a7cd24, reversing
changes made to 637f41476384c76d3cd7dcf5947caf2c8b8d7a9b:

2cf246143519 ("net: hns3: fix kernel crash when 1588 is sent on HIP08 devices")
3e22b7de34cb ("net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue")
d1c2e2961ab4 ("net: hns3: initialize reset_timer before hclgevf_misc_irq_init()")
5f62009ff108 ("net: hns3: don't auto enable misc vector")
2758f18a83ef ("net: hns3: Resolved the issue that the debugfs query result is inconsistent.")
662ecfc46690 ("net: hns3: fix missing features due to dev->features configuration too early")
3e0f7cc887b7 ("net: hns3: fixed reset failure issues caused by the incorrect reset type")
f2c14899caba ("net: hns3: add sync command to sync io-pgtable")
e6ab19443b36 ("net: hns3: default enable tx bounce buffer when smmu enabled")

The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds.

Link: https://lore.kernel.org/069c9838-b781-4012-934a-d2626fa78212@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-6.12-20241104' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2024-11-04

Alexander Hölzl contributes a patch to fix an error in the CAN j1939
documentation.

Thomas Mühlbacher's patch allows building of the {cc770,sja1000}_isa
drivers on x86_64 again.

A patch by me targets the m_can driver and limits the call to
free_irq() to devices with IRQs.

Dario Binacchi's patch fixes the RX and TX error counters in the c_can
driver.

The next 2 patches target the rockchip_canfd driver. Geert
Uytterhoeven's patch lets the driver depend on ARCH_ROCKCHIP. Jean
Delvare's patch drops the obsolete dependency on COMPILE_TEST.

The last 2 patches are by me and fix 2 regressions in the mcp251xfd
driver: fix broken coalescing configuration when switching CAN modes
and fix the length calculation of the Transmit Event FIFO (TEF) on
full TEF.

* tag 'linux-can-fixes-for-6.12-20241104' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
  can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration when switching CAN modes
  can: rockchip_canfd: Drop obsolete dependency on COMPILE_TEST
  can: rockchip_canfd: CAN_ROCKCHIP_CANFD should depend on ARCH_ROCKCHIP
  can: c_can: fix {rx,tx}_errors statistics
  can: m_can: m_can_close(): don't call free_irq() for IRQ-less devices
  can: {cc770,sja1000}_isa: allow building on x86_64
  can: j1939: fix error in J1939 documentation.
====================

Link: https://patch.msgid.link/20241104200120.393312-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
"Where the last set of fixes was mostly drivers, this time the
  devicetree changes all come at once, targeting mostly the Rockchips,
  Qualcomm and NXP platforms.

  The Qualcomm bugfixes target the Snapdragon X Elite laptops,
  specifically problems with PCIe and NVMe support to improve
  reliability, and a boot regresion on msm8939.

  Also for Snapdragon platforms, there are a number of correctness
  changes in the several platform specific device drivers, but none of
  these are as impactful.

  On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
  correcting individual entries in the devicetree that were incorrect
  and causing the media, video, mmc and spi drivers to misbehave in
  minor ways.

  The Arm SCMI firmware driver gets fixes for a use-after-free bug and
  for correctly parsing firmware information.

  On the RISC-V side, there are three minor devicetree fixes for
  starfive and sophgo, again addressing only minor mistakes. One device
  driver patch fixes a problem with spurious interrupt handling"

* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
  firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
  dt-bindings: firmware: arm,scmi: Add missing vendor string
  riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
  arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
  arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
  ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
  ARM: dts: rockchip: Fix the spi controller on rk3036
  ARM: dts: rockchip: drop grf reference from rk3036 hdmi
  ARM: dts: rockchip: fix rk3036 acodec node
  arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
  soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
  rpmsg: glink: Handle rejected intent request better
  arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
  arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
  arm64: dts: qcom: x1e80100: Fix up BAR spaces
  MAINTAINERS: invert Misc RISC-V SoC Support's pattern
  soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
  arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
  arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
  arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
  ...

e1000e: Remove Meteor Lake SMBUS workarounds

This is a partial revert to commit 76a0a3f9cc2f ("e1000e: fix force smbus
during suspend flow"). That commit fixed a sporadic PHY access issue but
introduced a regression in runtime suspend flows.
The original issue on Meteor Lake systems was rare in terms of the
reproduction rate and the number of the systems affected.

After the integration of commit 0a6ad4d9e169 ("e1000e: avoid failing the
system during pm_suspend"), PHY access loss can no longer cause a
system-level suspend failure. As it only occurs when the LAN cable is
disconnected, and is recovered during system resume flow. Therefore, its
functional impact is low, and the priority is given to stabilizing
runtime suspend.

Fixes: 76a0a3f9cc2f ("e1000e: fix force smbus during suspend flow")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

i40e: fix race condition by adding filter's intermediate sync state

Fix a race condition in the i40e driver that leads to MAC/VLAN filters
becoming corrupted and leaking. Address the issue that occurs under
heavy load when multiple threads are concurrently modifying MAC/VLAN
filters by setting mac and port VLAN.

1. Thread T0 allocates a filter in i40e_add_filter() within
        i40e_ndo_set_vf_port_vlan().
2. Thread T1 concurrently frees the filter in __i40e_del_filter() within
        i40e_ndo_set_vf_mac().
3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which
        refers to the already freed filter memory, causing corruption.

Reproduction steps:
1. Spawn multiple VFs.
2. Apply a concurrent heavy load by running parallel operations to change
        MAC addresses on the VFs and change port VLANs on the host.
3. Observe errors in dmesg:
"Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX,
please set promiscuous on manually for VF XX".

Exact code for stable reproduction Intel can't open-source now.

The fix involves implementing a new intermediate filter state,
I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list.
These filters cannot be deleted from the hash list directly but
must be removed using the full process.

Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: fix idpf_vc_core_init error path

In an event where the platform running the device control plane
is rebooted, reset is detected on the driver. It releases
all the resources and waits for the reset to complete. Once the
reset is done, it tries to build the resources back. At this
time if the device control plane is not yet started, then
the driver timeouts on the virtchnl message and retries to
establish the mailbox again.

In the retry flow, mailbox is deinitialized but the mailbox
workqueue is still alive and polling for the mailbox message.
This results in accessing the released control queue leading to
null-ptr-deref. Fix it by unrolling the work queue cancellation
and mailbox deinitialization in the reverse order which they got
initialized.

Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request")
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org # 6.9+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

idpf: avoid vport access in idpf_get_link_ksettings

When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.

To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps.

Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Cc: stable@vger.kernel.org # 6.7+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: change q_index variable type to s16 to store -1 value

Fix Flow Director not allowing to re-map traffic to 0th queue when action
is configured to drop (and vice versa).

The current implementation of ethtool callback in the ice driver forbids
change Flow Director action from 0 to -1 and from -1 to 0 with an error,
e.g:

# ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action 0
# ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action -1
rmgr: Cannot insert RX class rule: Invalid argument

We set the value of `u16 q_index = 0` at the beginning of the function
ice_set_fdir_input_set(). In case of "drop traffic" action (which is
equal to -1 in ethtool) we store the 0 value. Later, when want to change
traffic rule to redirect to queue with index 0 it returns an error
caused by duplicate found.

Fix this behaviour by change of the type of field `q_index` from u16 to s16
in `struct ice_fdir_fltr`. This allows to store -1 in the field in case
of "drop traffic" action. What is more, change the variable type in the
function ice_set_fdir_input_set() and assign at the beginning the new
`#define ICE_FDIR_NO_QUEUE_IDX` which is -1. Later, if the action is set
to another value (point specific queue index) the variable value is
overwritten in the function.

Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Fix use after free during unload with ports in bridge

Unloading the ice driver while switchdev port representors are added to
a bridge can lead to kernel panic. Reproducer:

  modprobe ice

  devlink dev eswitch set $PF1_PCI mode switchdev

  ip link add $BR type bridge
  ip link set $BR up

  echo 2 > /sys/class/net/$PF1/device/sriov_numvfs
  sleep 2

  ip link set $PF1 master $BR
  ip link set $VF1_PR master $BR
  ip link set $VF2_PR master $BR
  ip link set $PF1 up
  ip link set $VF1_PR up
  ip link set $VF2_PR up
  ip link set $VF1 up

  rmmod irdma ice

When unloading the driver, ice_eswitch_detach() is eventually called as
part of VF freeing. First, it removes a port representor from xarray,
then unregister_netdev() is called (via repr->ops.rem()), finally
representor is deallocated. The problem comes from the bridge doing its
own deinit at the same time. unregister_netdev() triggers a notifier
chain, resulting in ice_eswitch_br_port_deinit() being called. It should
set repr->br_port = NULL, but this does not happen since repr has
already been removed from xarray and is not found. Regardless, it
finishes up deallocating br_port. At this point, repr is still not freed
and an fdb event can happen, in which ice_eswitch_br_fdb_event_work()
takes repr->br_port and tries to use it, which causes a panic (use after
free).

Note that this only happens with 2 or more port representors added to
the bridge, since with only one representor port, the bridge deinit is
slightly different (ice_eswitch_br_port_deinit() is called via
ice_eswitch_br_ports_flush(), not ice_eswitch_br_port_unlink()).

Trace:
  Oops: general protection fault, probably for non-canonical address 0xf129010fd1a93284: 0000 [#1] PREEMPT SMP KASAN NOPTI
  KASAN: maybe wild-memory-access in range [0x8948287e8d499420-0x8948287e8d499427]
  (...)
  Workqueue: ice_bridge_wq ice_eswitch_br_fdb_event_work [ice]
  RIP: 0010:__rht_bucket_nested+0xb4/0x180
  (...)
  Call Trace:
   (...)
   ice_eswitch_br_fdb_find+0x3fa/0x550 [ice]
   ? __pfx_ice_eswitch_br_fdb_find+0x10/0x10 [ice]
   ice_eswitch_br_fdb_event_work+0x2de/0x1e60 [ice]
   ? __schedule+0xf60/0x5210
   ? mutex_lock+0x91/0xe0
   ? __pfx_ice_eswitch_br_fdb_event_work+0x10/0x10 [ice]
   ? ice_eswitch_br_update_work+0x1f4/0x310 [ice]
   (...)

A workaround is available: brctl setageing $BR 0, which stops the bridge
from adding fdb entries altogether.

Change the order of operations in ice_eswitch_detach(): move the call to
unregister_netdev() before removing repr from xarray. This way
repr->br_port will be correctly set to NULL in
ice_eswitch_br_port_deinit(), preventing a panic.

Fixes: fff292b47ac1 ("ice: add VF representors one by one")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation

When sealing or unsealing a key blob we currently do not wait for
the AEAD cipher operation to finish and simply return after submitting
the request. If there is some load on the system we can exit before
the cipher operation is done and the buffer we read from/write to
is already removed from the stack. This will e.g. result in NULL
pointer dereference errors in the DCP driver during blob creation.

Fix this by waiting for the AEAD cipher operation to finish before
resuming the seal and unseal calls.

Cc: stable@vger.kernel.org # v6.10+
Fixes: 0e28bf61a5f9 ("KEYS: trusted: dcp: fix leak of blob encryption key")
Reported-by: Parthiban N <parthiban@linumiz.com>
Closes: https://lore.kernel.org/keyrings/254d3bb1-6dbc-48b4-9c08-77df04baee2f@linumiz.com/
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

security/keys: fix slab-out-of-bounds in key_task_permission

KASAN reports an out of bounds read:
BUG: KASAN: slab-out-of-bounds in __kuid_val include/linux/uidgid.h:36
BUG: KASAN: slab-out-of-bounds in uid_eq include/linux/uidgid.h:63 [inline]
BUG: KASAN: slab-out-of-bounds in key_task_permission+0x394/0x410
security/keys/permission.c:54
Read of size 4 at addr ffff88813c3ab618 by task stress-ng/4362

CPU: 2 PID: 4362 Comm: stress-ng Not tainted 5.10.0-14930-gafbffd6c3ede #15
Call Trace:
__dump_stack lib/dump_stack.c:82 [inline]
dump_stack+0x107/0x167 lib/dump_stack.c:123
print_address_description.constprop.0+0x19/0x170 mm/kasan/report.c:400
__kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560
kasan_report+0x3a/0x50 mm/kasan/report.c:585
__kuid_val include/linux/uidgid.h:36 [inline]
uid_eq include/linux/uidgid.h:63 [inline]
key_task_permission+0x394/0x410 security/keys/permission.c:54
search_nested_keyrings+0x90e/0xe90 security/keys/keyring.c:793

This issue was also reported by syzbot.

It can be reproduced by following these steps(more details [1]):
1. Obtain more than 32 inputs that have similar hashes, which ends with the
   pattern '0xxxxxxxe6'.
2. Reboot and add the keys obtained in step 1.

The reproducer demonstrates how this issue happened:
1. In the search_nested_keyrings function, when it iterates through the
   slots in a node(below tag ascend_to_node), if the slot pointer is meta
   and node->back_pointer != NULL(it means a root), it will proceed to
   descend_to_node. However, there is an exception. If node is the root,
   and one of the slots points to a shortcut, it will be treated as a
   keyring.
2. Whether the ptr is keyring decided by keyring_ptr_is_keyring function.
   However, KEYRING_PTR_SUBTYPE is 0x2UL, the same as
   ASSOC_ARRAY_PTR_SUBTYPE_MASK.
3. When 32 keys with the similar hashes are added to the tree, the ROOT
   has keys with hashes that are not similar (e.g. slot 0) and it splits
   NODE A without using a shortcut. When NODE A is filled with keys that
   all hashes are xxe6, the keys are similar, NODE A will split with a
   shortcut. Finally, it forms the tree as shown below, where slot 6 points
   to a shortcut.

                      NODE A
              +------>+---+
      ROOT    |       | 0 | xxe6
      +---+   |       +---+
xxxx | 0 | shortcut  :   : xxe6
      +---+   |       +---+
xxe6 :   :   |       |   | xxe6
      +---+   |       +---+
      | 6 |---+       :   : xxe6
      +---+           +---+
xxe6 :   :           | f | xxe6
      +---+           +---+
xxe6 | f |
      +---+

4. As mentioned above, If a slot(slot 6) of the root points to a shortcut,
   it may be mistakenly transferred to a key*, leading to a read
   out-of-bounds read.

To fix this issue, one should jump to descend_to_node if the ptr is a
shortcut, regardless of whether the node is root or not.

[1] https://lore.kernel.org/linux-kernel/1cfa878e-8c7b-4570-8606-21daf5e13ce7@huaweicloud.com/

[jarkko: tweaked the commit message a bit to have an appropriate closes
tag.]
Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring")
Reported-by: syzbot+5b415c07907a2990d1a3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000cbb7860611f61147@google.com/T/
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'mmc-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull mmc fixes from Ulf Hansson:

- sdhci-pci-gli: A couple of fixes for low power mode on GL9767

* tag 'mmc-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9767: Fix low power mode in the SD Express process
mmc: sdhci-pci-gli: GL9767: Fix low power mode on the set clock function

Merge tag 'tpmdd-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fix from Jarkko Sakkinen:
"Fix a race condition between tpm_pm_suspend() and tpm_hwrng_read() (I
think for good now)"

* tag 'tpmdd-next-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Lock TPM chip in tpm_pm_suspend() first

can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation

Commit b8e0ddd36ce9 ("can: mcp251xfd: tef: prepare to workaround
broken TEF FIFO tail index erratum") introduced
mcp251xfd_get_tef_len() to get the number of unhandled transmit events
from the Transmit Event FIFO (TEF).

As the TEF has no head pointer, the driver uses the TX FIFO's tail
pointer instead, assuming that send frames are completed. However the
check for the TEF being full was not correct. This leads to the driver
stop working if the TEF is full.

Fix the TEF full check by assuming that if, from the driver's point of
view, there are no free TX buffers in the chip and the TX FIFO is
empty, all messages must have been sent and the TEF must therefore be
full.

Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Closes: https://patch.msgid.link/FR3P281MB155216711EFF900AD9791B7ED9692@FR3P281MB1552.DEUP281.PROD.OUTLOOK.COM
Fixes: b8e0ddd36ce9 ("can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum")
Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241104-mcp251xfd-fix-length-calculation-v3-1-608b6e7e2197@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration when switching CAN modes

Since commit 50ea5449c563 ("can: mcp251xfd: fix ring configuration
when switching from CAN-CC to CAN-FD mode"), the current ring and
coalescing configuration is passed to can_ram_get_layout(). That fixed
the issue when switching between CAN-CC and CAN-FD mode with
configured ring (rx, tx) and/or coalescing parameters (rx-frames-irq,
tx-frames-irq).

However 50ea5449c563 ("can: mcp251xfd: fix ring configuration when
switching from CAN-CC to CAN-FD mode"), introduced a regression when
switching CAN modes with disabled coalescing configuration: Even if
the previous CAN mode has no coalescing configured, the new mode is
configured with active coalescing. This leads to delayed receiving of
CAN-FD frames.

This comes from the fact, that ethtool uses usecs = 0 and max_frames =
1 to disable coalescing, however the driver uses internally
priv->{rx,tx}_obj_num_coalesce_irq = 0 to indicate disabled
coalescing.

Fix the regression by assigning struct ethtool_coalesce
ec->{rx,tx}_max_coalesced_frames_irq = 1 if coalescing is disabled in
the driver as can_ram_get_layout() expects this.

Reported-by: https://github.com/vdh-robothania
Closes: https://github.com/raspberrypi/linux/issues/6407
Fixes: 50ea5449c563 ("can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241025-mcp251xfd-fix-coalesing-v1-1-9d11416de1df@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: rockchip_canfd: Drop obsolete dependency on COMPILE_TEST

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), OF
can be enabled on all architectures. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241022130439.70d016e9@endymion.delvare
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: rockchip_canfd: CAN_ROCKCHIP_CANFD should depend on ARCH_ROCKCHIP

The Rockchip CAN-FD controller is only present on Rockchip SoCs. Hence
add a dependency on ARCH_ROCKCHIP, to prevent asking the user about
this driver when configuring a kernel without Rockchip platform
support.

Fixes: ff60bfbaf67f219c ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/a4b3c8c1cca9515e67adac83af5ba1b1fab2fcbc.1727169288.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: c_can: fix {rx,tx}_errors statistics

The c_can_handle_bus_err() function was incorrectly incrementing only the
receive error counter, even in cases of bit or acknowledgment errors that
occur during transmission. The patch fixes the issue by incrementing the
appropriate counter based on the type of error.

Fixes: 881ff67ad450 ("can: c_can: Added support for Bosch C_CAN controller")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241014135319.2009782-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: m_can: m_can_close(): don't call free_irq() for IRQ-less devices

In commit b382380c0d2d ("can: m_can: Add hrtimer to generate software
interrupt") support for IRQ-less devices was added. Instead of an
interrupt, the interrupt routine is called by a hrtimer-based polling
loop.

That patch forgot to change free_irq() to be only called for devices
with IRQs. Fix this, by calling free_irq() conditionally only if an
IRQ is available for the device (and thus has been requested
previously).

Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20240930-m_can-cleanups-v1-1-001c579cdee4@pengutronix.de
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: {cc770,sja1000}_isa: allow building on x86_64

The ISA variable is only defined if X86_32 is also defined. However,
these drivers are still useful and in use on at least some modern 64-bit
x86 industrial systems as well. With the correct module parameters, they
work as long as IO port communication is possible, despite their name
having ISA in them.

Fixes: a29689e60ed3 ("net: handle HAS_IOPORT dependencies")
Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Link: https://patch.msgid.link/20240919174151.15473-2-tmuehlbacher@posteo.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: j1939: fix error in J1939 documentation.

The description of PDU1 format usage mistakenly referred to PDU2 format.

Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241023145257.82709-1-alexander.hoelzl@gmx.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

dm cache: fix potential out-of-bounds access on the first resume

Out-of-bounds access occurs if the fast device is expanded unexpectedly
before the first-time resume of the cache table. This happens because
expanding the fast device requires reloading the cache table for
cache_create to allocate new in-core data structures that fit the new
size, and the check in cache_preresume is not performed during the
first resume, leading to the issue.

Reproduce steps:

1. prepare component devices:

dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct

2. load a cache table of 512 cache blocks, and deliberately expand the
   fast device before resuming the cache, making the in-core data
   structures inadequate.

dmsetup create cache --notable
dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache

3. suspend the cache to write out the in-core dirty bitset and hint
   array, leading to out-of-bounds access to the dirty bitset at offset
   0x40:

dmsetup suspend cache

KASAN reports:

  BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80
  Read of size 8 at addr ffffc90000085040 by task dmsetup/90

  (...snip...)
  The buggy address belongs to the virtual mapping at
   [ffffc90000085000, ffffc90000087000) created by:
   cache_ctr+0x176a/0x35f0

  (...snip...)
  Memory state around the buggy address:
   ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
   ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
  >ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8
                                             ^
   ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
   ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8

Fix by checking the size change on the first resume.

Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>

dm cache: optimize dirty bit checking with find_next_bit when resizing

When shrinking the fast device, dm-cache iteratively searches for a
dirty bit among the cache blocks to be dropped, which is less efficient.
Use find_next_bit instead, as it is twice as fast as the iterative
approach with test_bit.

Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>

dm cache: fix out-of-bounds access to the dirty bitset when resizing

dm-cache checks the dirty bits of the cache blocks to be dropped when
shrinking the fast device, but an index bug in bitset iteration causes
out-of-bounds access.

Reproduce steps:

1. create a cache device of 1024 cache blocks (128 bytes dirty bitset)

dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"

2. shrink the fast device to 512 cache blocks, triggering out-of-bounds
   access to the dirty bitset (offset 0x80)

dmsetup suspend cache
dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache

KASAN reports:

  BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0
  Read of size 8 at addr ffffc900000f3080 by task dmsetup/131

  (...snip...)
  The buggy address belongs to the virtual mapping at
   [ffffc900000f3000, ffffc900000f5000) created by:
   cache_ctr+0x176a/0x35f0

  (...snip...)
  Memory state around the buggy address:
   ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
   ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
                     ^
   ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
   ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8

Fix by making the index post-incremented.

Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>

dm cache: fix flushing uninitialized delayed_work on cache_ctr error

An unexpected WARN_ON from flush_work() may occur when cache creation
fails, caused by destroying the uninitialized delayed_work waker in the
error path of cache_create(). For example, the warning appears on the
superblock checksum error.

Reproduce steps:

dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"

Kernel logs:

(snip)
WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890

Fix by pulling out the cancel_delayed_work_sync() from the constructor's
error path. This patch doesn't affect the use-after-free fix for
concurrent dm_resume and dm_destroy (commit 6a459d8edbdb ("dm cache: Fix
UAF in destroy()")) as cache_dtr is not changed.

Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: 6a459d8edbdb ("dm cache: Fix UAF in destroy()")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>

dm cache: correct the number of origin blocks to match the target length

When creating a cache device, the actual size of the cache origin might
be greater than the specified cache target length. In such case, the
number of origin blocks should match the cache target length, not the
full size of the origin device, since access beyond the cache target is
not possible. This issue occurs when reducing the origin device size
using lvm, as lvreduce preloads the new cache table before resuming the
cache origin, which can result in incorrect sizes for the discard bitset
and smq hotspot blocks.

Reproduce steps:

1. create a cache device consists of 4096 origin blocks

dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"

2. reduce the cache origin to 2048 oblocks, in lvreduce's approach

dmsetup reload corig --table "0 262144 linear /dev/sdc 262144"
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup suspend cache
dmsetup suspend corig
dmsetup suspend cdata
dmsetup suspend cmeta
dmsetup resume corig
dmsetup resume cdata
dmsetup resume cmeta
dmsetup resume cache

3. shutdown the cache, and check the number of discard blocks in
superblock. The value is expected to be 2048, but actually is 4096.

dmsetup remove cache corig cdata cmeta
dd if=/dev/sdc bs=1c count=8 skip=224 2>/dev/null | hexdump -e '1/8 "%u\n"'

Fix by correcting the origin_blocks initialization in cache_create and
removing the unused origin_sectors from struct cache_args accordingly.

Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Fixes: c6b4fcbad044 ("dm: add cache target")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Joe Thornber <thornber@redhat.com>

dm-verity: don't crash if panic_on_corruption is not selected

If the user sets panic_on_error and doesn't set panic_on_corruption,
dm-verity should not panic on data mismatch. But, currently it panics,
because it treats data mismatch as I/O error.

This commit fixes the logic so that if there is data mismatch and
panic_on_corruption or restart_on_corruption is not selected, the system
won't restart or panic.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Fixes: f811b83879fb ("dm-verity: introduce the options restart_on_error and panic_on_error")

dm-unstriped: cast an operand to sector_t to prevent potential uint32_t overflow

This was found by a static analyzer.
There may be a potential integer overflow issue in
unstripe_ctr(). uc->unstripe_offset and uc->unstripe_width are
defined as "sector_t"(uint64_t), while uc->unstripe,
uc->chunk_size and uc->stripes are all defined as "uint32_t".
The result of the calculation will be limited to "uint32_t"
without correct casting.
So, we recommend adding an extra cast to prevent potential
integer overflow.

Fixes: 18a5bf270532 ("dm: add unstriped target")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org

nfs: avoid i_lock contention in nfs_clear_invalid_mapping

Multi-threaded buffered reads to the same file exposed significant
inode spinlock contention in nfs_clear_invalid_mapping().

Eliminate this spinlock contention by checking flags without locking,
instead using smp_rmb and smp_load_acquire accordingly, but then take
spinlock and double-check these inode flags.

Also refactor nfs_set_cache_invalid() slightly to use
smp_store_release() to pair with nfs_clear_invalid_mapping()'s
smp_load_acquire().

While this fix is beneficial for all multi-threaded buffered reads
issued by an NFS client, this issue was identified in the context of
surprisingly low LOCALIO performance with 4K multi-threaded buffered
read IO. This fix dramatically speeds up LOCALIO performance:

before: read: IOPS=1583k, BW=6182MiB/s (6482MB/s)(121GiB/20002msec)
after: read: IOPS=3046k, BW=11.6GiB/s (12.5GB/s)(232GiB/20001msec)

Fixes: 17dfeb911339 ("NFS: Fix races in nfs_revalidate_mapping")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

nfs_common: fix localio to cope with racing nfs_local_probe()

Fix the possibility of racing nfs_local_probe() resulting in:
  list_add double add: new=ffff8b99707f9f58, prev=ffff8b99707f9f58, next=ffffffffc0f30000.
  ------------[ cut here ]------------
  kernel BUG at lib/list_debug.c:35!

Add nfs_uuid_init() to properly initialize all nfs_uuid_t members
(particularly its list_head).

Switch to returning bool from nfs_uuid_begin(), returns false if
nfs_uuid_t is already in-use (its list_head is on a list). Update
nfs_local_probe() to return early if the nfs_client's cl_uuid
(nfs_uuid_t) is in-use.

Also, switch nfs_uuid_begin() from using list_add_tail_rcu() to
list_add_tail() -- rculist was used in an earlier version of the
localio code that had a lockless nfs_uuid_lookup interface.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

NFS: Further fixes to attribute delegation a/mtime changes

When asked to set both an atime and an mtime to the current system time,
ensure that the setting is atomic by calling inode_update_timestamps()
only once with the appropriate flags.

Fixes: e12912d94137 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

NFS: Fix attribute delegation behaviour on exclusive create

When the client does an exclusive create and the server decides to store
the verifier in the timestamps, a SETATTR is subsequently sent to fix up
those timestamps. When that is the case, suppress the exceptions for
attribute delegations in nfs4_bitmap_copy_adjust().

Fixes: 32215c1f893a ("NFSv4: Don't request atime/mtime/size if they are delegated to us")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

nfs: Fix KMSAN warning in decode_getfattr_attrs()

Fix the following KMSAN warning:

CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
=====================================================
=====================================================
BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_generic+0x806/0xb00
nfs4_xdr_dec_getattr+0x1de/0x240
rpcauth_unwrap_resp_decode+0xab/0x100
rpcauth_unwrap_resp+0x95/0xc0
call_decode+0x4ff/0xb50
__rpc_execute+0x57b/0x19d0
rpc_execute+0x368/0x5e0
rpc_run_task+0xcfe/0xee0
nfs4_proc_getattr+0x5b5/0x990
__nfs_revalidate_inode+0x477/0xd00
nfs_access_get_cached+0x1021/0x1cc0
nfs_do_access+0x9f/0xae0
nfs_permission+0x1e4/0x8c0
inode_permission+0x356/0x6c0
link_path_walk+0x958/0x1330
path_lookupat+0xce/0x6b0
filename_lookup+0x23e/0x770
vfs_statx+0xe7/0x970
vfs_fstatat+0x1f2/0x2c0
__se_sys_newfstatat+0x67/0x880
__x64_sys_newfstatat+0xbd/0x120
x64_sys_call+0x1826/0x3cf0
do_syscall_64+0xd0/0x1b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f

The KMSAN warning is triggered in decode_getfattr_attrs(), when calling
decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not
initialized.

Fix the issue by initializing fattr->mdsthreshold to NULL in
nfs_fattr_init().

Cc: stable@vger.kernel.org # v3.5.x
Fixes: 88034c3d88c2 ("NFSv4.1 mdsthreshold attribute xdr")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

NFSv3: only use NFS timeout for MOUNT when protocols are compatible

If a timeout is specified in the mount options, it currently applies to
both the NFS protocol and (with v3) the MOUNT protocol.  This is
sensible when they both use the same underlying protocol, or those
protocols are compatible w.r.t timeouts as RDMA and TCP are.

However if, for example, NFS is using TCP and MOUNT is using UDP then
using the same timeout doesn't make much sense.

If you
   mount -o vers=3,proto=tcp,mountproto=udp,timeo=600,retrans=5 \
      server:/path /mountpoint

then the timeo=600 which was intended for the NFS/TCP request will
apply to the MOUNT/UDP requests with the result that there will only be
one request sent (because UDP has a maximum timeout of 60 seconds).
This is not what a reasonable person might expect.

This patch disables the sharing of timeout information in cases where
the underlying protocols are not compatible.

Fixes: c9301cb35b59 ("nfs: hornor timeo and retrans option when mounting NFSv3")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()

xs_tcp_finish_connecting() can return -ENOTCONN but the switch statement
in xs_tcp_setup_socket() treats that as an unhandled error.

If we treat it as a known error it would propagate back to
call_connect_status() which does handle that error code. This appears
to be the intention of the commit (given below) which added -ENOTCONN as
a return status for xs_tcp_finish_connecting().

So add -ENOTCONN to the switch statement as an error to pass through to
the caller.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1231050
Link: https://access.redhat.com/discussions/3434091
Fixes: 01d37c428ae0 ("SUNRPC: xprt_connect() don't abort the task if the transport isn't bound")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

Merge tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm driver fixes for v6.12

The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .

The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.

The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.

Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.

* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
  rpmsg: glink: Handle rejected intent request better
  soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
  firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
  EDAC/qcom: Make irq configuration optional
  firmware: qcom: scm: fix a NULL-pointer dereference
  firmware: qcom: scm: suppress download mode error
  soc: qcom: Add check devm_kasprintf() returned value
  MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings

Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

platform/x86: ideapad-laptop: add missing Ideapad Pro 5 fn keys

The scancodes for the Mic Mute and Airplane keys on the Ideapad Pro 5
(14AHP9 at least, probably the other variants too) are different and
were not being picked up by the driver. This adds them to the keymap.

Apart from what is already supported, the remaining fn keys are
unfortunately producing windows-specific key-combos.

Signed-off-by: Renato Caldas <renato@calgera.com>
Link: https://lore.kernel.org/r/20241102183116.30142-1-renato@calgera.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-wmi-base: Handle META key Lock/Unlock events

Some Alienware devices have a key that locks/unlocks the Meta key. This
key triggers a WMI event that should be ignored by the kernel, as it's
handled by internally the firmware.

There is no known way of changing this default behavior. The firmware
would lock/unlock the Meta key, regardless of how the event is handled.

Tested on an Alienware x15 R1.

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154441.6663-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: dell-smbios-base: Extends support to Alienware products

Fixes the following error:

dell_smbios: Unable to run on non-Dell system

Which is triggered after dell-wmi driver fails to initialize on
Alienware systems, as it depends on dell-smbios.

This effectively extends dell-wmi, dell-smbios and dcdbas support to
Alienware devices, that might share some features of the SMBIOS intereface
calling interface with other Dell products.

Tested on an Alienware X15 R1.

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154023.6149-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/amd/pmc: Detect when STB is not available

Loading the amd_pmc module as:

    amd_pmc enable_stb=1

...can result in the following messages in the kernel ring buffer:

    amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
    ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
    WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340

Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message.

Link: https://lore.kernel.org/platform-driver-x86/c588ff5d-3e04-4549-9a86-284b9b4419ba@amd.com
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241028180241.1341624-1-bugfood-ml@fatooh.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86/amd/pmf: Add SMU metrics table support for 1Ah family 60h model

Add SMU metrics table support for 1Ah family 60h model. This information
will be used by the PMF driver to alter the system thermals.

Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241023063245.1404420-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Linux 6.12-rc6