Linus Torvalds [Sun, 20 Nov 2016 18:27:39 +0000 (10:27 -0800)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"A few more ARM fixes:
- the assembly backtrace code suffers problems with the new printk()
implementation which assumes that kernel messages without KERN_CONT
should have newlines inserted between them. Fix this.
- fix a section naming error - ".init.text" rather than ".text.init"
- preallocate DMA debug memory at core_initcall() time rather than
fs_initcall(), as we have some core drivers that need to use DMA
mapping - and that triggers a kernel warning from the DMA debug
code.
- fix XIP kernels after the ro_after_init changes made this data
permanently read-only"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: Fix XIP kernels
ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
ARM: 8624/1: proc-v7m.S: fix init section name
ARM: fix backtrace
Zhang Shengju [Sat, 19 Nov 2016 15:28:32 +0000 (23:28 +0800)]
rtnl: fix the loop index update error in rtnl_dump_ifinfo()
If the link is filtered out, loop index should also be updated. If not,
loop index will not be correct.
Fixes: dc599f76c22b0 ("net: Add support for filtering link dump by master device and kind") Signed-off-by: Zhang Shengju <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Alexey Dobriyan [Sat, 19 Nov 2016 01:08:08 +0000 (04:08 +0300)]
net: fix bogus cast in skb_pagelen() and use unsigned variables
1) cast to "int" is unnecessary:
u8 will be promoted to int before decrementing,
small positive numbers fit into "int", so their values won't be changed
during promotion.
Once everything is int including loop counters, signedness doesn't
matter: 32-bit operations will stay 32-bit operations.
But! Someone tried to make this loop smart by making everything of
the same type apparently in an attempt to optimise it.
Do the optimization, just differently.
Do the cast where it matters. :^)
2) frag size is unsigned entity and sum of fragments sizes is also
unsigned.
Make everything unsigned, leave no MOVSX instruction behind.
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-4 (-4)
function old new delta
skb_cow_data 835 834 -1
ip_do_fragment 2549 2548 -1
ip6_fragment 3130 3128 -2
Total: Before=154865032, After=154865028, chg -0.00%
Alexey Dobriyan [Sat, 19 Nov 2016 00:59:07 +0000 (03:59 +0300)]
netlink: smaller nla_attr_minlen table
Length of a netlink attribute may be u16 but lengths of basic attributes
are much smaller, so small we can save 16 bytes of .rodata and pocket
change inside .text.
16-bit is worse on x86-64 than 8-bit because of operand size override prefix.
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-19 (-19)
function old new delta
validate_nla 418 417 -1
nla_policy_len 66 64 -2
nla_attr_minlen 32 16 -16
Total: Before=154865051, After=154865032, chg -0.00%
Guillaume Nault [Fri, 18 Nov 2016 21:13:00 +0000 (22:13 +0100)]
l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()
Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind().
Without lock, a concurrent call could modify the socket flags between
the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way,
a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it
would then leave a stale pointer there, generating use-after-free
errors when walking through the list or modifying adjacent entries.
BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8
Write of size 8 by task syz-executor/10987
CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838ffffffff829f835bffff88001b5a1640ffff8800081b0ec0 ffff8800081b15a0ffff8800081b6d20ffff880031d97860ffffffff8174d3cc ffff880031d978f0ffff8800081b0e80ffff88001b5a1640ffff880031d978e0
Call Trace:
[<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15
[<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156
[< inline >] print_address_description mm/kasan/report.c:194
[<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283
[< inline >] kasan_report mm/kasan/report.c:303
[<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329
[< inline >] __write_once_size ./include/linux/compiler.h:249
[< inline >] __hlist_del ./include/linux/list.h:622
[< inline >] hlist_del_init ./include/linux/list.h:637
[<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239
[<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
[<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
[<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
[<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
[<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
[<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
[<ffffffff813774f9>] task_work_run+0xf9/0x170
[<ffffffff81324aae>] do_exit+0x85e/0x2a00
[<ffffffff81326dc8>] do_group_exit+0x108/0x330
[<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
[<ffffffff811b49af>] do_signal+0x7f/0x18f0
[<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
[< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
[<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448
Allocated:
PID = 10987
[ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
[ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
[ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0
[ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20
[ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417
[ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708
[ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716
[ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721
[ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326
[ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388
[ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182
[ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153
[ 1116.897025] [< inline >] sock_create net/socket.c:1193
[ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223
[ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203
[ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6
Freed:
PID = 10987
[ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20
[ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0
[ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0
[ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352
[ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374
[ 1116.897025] [< inline >] slab_free mm/slub.c:2951
[ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973
[ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369
[ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444
[ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452
[ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460
[ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471
[ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589
[ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243
[ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415
[ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422
[ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570
[ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017
[ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208
[ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244
[ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170
[ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00
[ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330
[ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307
[ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0
[ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156
[ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190
[ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259
[ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6
Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Linus Torvalds [Sun, 20 Nov 2016 02:40:47 +0000 (18:40 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Again a set of smaller fixes across several platforms (OMAP, Marvell,
Allwinner, i.MX, etc).
A handful of typo fixes and smaller missing contents from device
trees, with some tweaks to OMAP mach files to deal with CPU feature
print misformatting, potential NULL ptr dereference and one setup
issue with UARTs"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
ARM: omap3: Add missing memory node in SOM-LV
arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
arm64: dts: marvell: fix clocksource for CP110 slave SPI0
arm64: dts: marvell: Fix typo in label name on Armada 37xx
ASoC: omap-abe-twl6040: fix typo in bindings documentation
dts: omap5: board-common: enable twl6040 headset jack detection
dts: omap5: board-common: add phandle to reference Palmas gpadc
ARM: OMAP2+: avoid NULL pointer dereference
ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
ARM: dts: omap3: Fix memory node in Torpedo board
ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
ARM: OMAP3: Fix formatting of features printed
ARM: dts: imx53-qsb: Fix regulator constraints
ARM: dts: sun8i: fix the pinmux for UART1
Linus Torvalds [Sun, 20 Nov 2016 02:33:50 +0000 (18:33 -0800)]
Merge tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A security fix (so a maliciously corrupted file system image won't
panic the kernel) and some fixes for CONFIG_VMAP_STACK"
* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: sanity check the block and cluster size at mount time
fscrypto: don't use on-stack buffer for key derivation
fscrypto: don't use on-stack buffer for filename encryption
Theodore Ts'o [Fri, 18 Nov 2016 18:00:24 +0000 (13:00 -0500)]
ext4: sanity check the block and cluster size at mount time
If the block size or cluster size is insane, reject the mount. This
is important for security reasons (although we shouldn't be just
depending on this check).
Eric Biggers [Mon, 14 Nov 2016 01:41:09 +0000 (20:41 -0500)]
fscrypto: don't use on-stack buffer for key derivation
With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page. get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.
This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.
Eric Biggers [Mon, 14 Nov 2016 01:35:52 +0000 (20:35 -0500)]
fscrypto: don't use on-stack buffer for filename encryption
With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page. For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename. Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.
This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.
Linus Torvalds [Sat, 19 Nov 2016 21:35:09 +0000 (13:35 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some I2C driver bugfixes (and one documentation fix)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare
i2c: mux: fix up dependencies
i2c: Documentation: i2c-topology: fix minor whitespace nit
i2c: mux: demux-pinctrl: make drivers with no pinctrl work again
Linus Torvalds [Sat, 19 Nov 2016 21:31:40 +0000 (13:31 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- Fix handling of the 32bit cycle counter
- Fix cycle counter filtering
x86:
- Fix a race leading to double unregistering of user notifiers
- Amend oversight in kvm_arch_set_irq that turned Hyper-V code dead
- Use SRCU around kvm_lapic_set_vapic_addr
- Avoid recursive flushing of asynchronous page faults
- Do not rely on deferred update in KVM_GET_CLOCK, which fixes #GP
- Let userspace know that KVM_GET_CLOCK is useful with master clock;
4.9 changed the return value to better match the guest clock, but
didn't provide means to let guests take advantage of it"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic
KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
KVM: async_pf: avoid recursive flushing of work items
kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use
KVM: Disable irq while unregistering user notifier
KVM: x86: do not go through vcpu in __get_kvmclock_ns
KVM: arm64: Fix the issues when guest PMCCFILTR is configured
arm64: KVM: pmu: Fix AArch32 cycle counter access
Alex Hemme [Sat, 19 Nov 2016 09:48:38 +0000 (10:48 +0100)]
i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
Deselect functionality can be ignored for device-trees with
"i2c-mux-idle-disconnect" entries if no platform_data is available.
By enabling the deselect functionality outside the platform_data
block the logic works as it did in previous kernels.
Fixes: 7fcac9807175 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core") Cc: <[email protected]> # v4.7+ Signed-off-by: Alex Hemme <[email protected]> Signed-off-by: Ziyang Wu <[email protected]>
[touched up a few minor issues /peda] Signed-off-by: Peter Rosin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
Linus Torvalds [Sat, 19 Nov 2016 19:21:59 +0000 (11:21 -0800)]
Merge tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
- fix system reset interrupt winkle wakeups
- fix setting of AIL in hypervisor mode
Fixes for code merged this cycle:
- fix exception vector build with 2.23 era binutils
- fix missing update of HID register on secondary CPUs
Other:
- fix missing pr_cont()s
- invalidate ERAT on tlbiel for POWER9 DD1"
* tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix missing update of HID register on secondary CPUs
powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
powerpc/64: Fix setting of AIL in hypervisor mode
powerpc/oops: Fix missing pr_cont()s in instruction dump
powerpc/oops: Fix missing pr_cont()s in show_regs()
powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al.
powerpc/oops: Fix missing pr_cont()s in show_stack()
powerpc: Fix exception vector build with 2.23 era binutils
powerpc/64s: Fix system reset interrupt winkle wakeups
Linus Torvalds [Sat, 19 Nov 2016 19:15:45 +0000 (11:15 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Compiler warning in caam driver that was the last one remaining
- Do not register aes-xts in caam drivers on unsupported platforms
- Regression in algif_hash interface that may lead to an oops"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_hash - Fix NULL hash crash with shash
crypto: caam - fix type mismatch warning
crypto: caam - do not register AES-XTS mode on LP units
Linus Torvalds [Sat, 19 Nov 2016 19:05:47 +0000 (11:05 -0800)]
Merge tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Some driver fixes which we pending in my tree:
- return error code fix in edma driver
- Kconfig fix for genric allocator in mmp_tdma
- fix uninitialized value in sun6i
- Runtime pm fixes for cppi"
* tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: cppi41: More PM runtime fixes
dmaengine: cpp41: Fix handling of error path
dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected
dmaengine: cppi41: Fix list not empty warning on module removal
dmaengine: sun6i: fix the uninitialized value for v_lli
dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig
dmaengine: edma: Fix error return code in edma_alloc_chan_resources()
The reason is that kvm_put_kvm is causing the destruction of the VM, but
the page fault is still on the ->queue list. The ->queue list is owned
by the VCPU, not by the work items, so we cannot just add list_del to
the work item.
Instead, use work->vcpu to note async page faults that have been resolved
and will be processed through the done list. There is no need to flush
those.
Paolo Bonzini [Wed, 9 Nov 2016 16:48:15 +0000 (17:48 +0100)]
kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use
Userspace can read the exact value of kvmclock by reading the TSC
and fetching the timekeeping parameters out of guest memory. This
however is brittle and not necessary anymore with KVM 4.11. Provide
a mechanism that lets userspace know if the new KVM_GET_CLOCK
semantics are in effect, and---since we are at it---if the clock
is stable across all VCPUs.
KVM: Disable irq while unregistering user notifier
Function user_notifier_unregister should be called only once for each
registered user notifier.
Function kvm_arch_hardware_disable can be executed from an IPI context
which could cause a race condition with a VCPU returning to user mode
and attempting to unregister the notifier.
Paolo Bonzini [Wed, 16 Nov 2016 17:31:30 +0000 (18:31 +0100)]
KVM: x86: do not go through vcpu in __get_kvmclock_ns
Going through the first VCPU is wrong if you follow a KVM_SET_CLOCK with
a KVM_GET_CLOCK immediately after, without letting the VCPU run and
call kvm_guest_time_update.
To fix this, compute the kvmclock value ourselves, using the master
clock (tsc, nsec) pair as the base and the host CPU frequency as
the scale.
David S. Miller [Sat, 19 Nov 2016 16:13:05 +0000 (11:13 -0500)]
Merge tag 'batadv-next-for-davem-20161119' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature patchset includes the following changes:
- 6 patches adding functionality to detect a WiFi interface under
other virtual interfaces, like VLANs. They introduce a cache for
the detected the WiFi configuration to avoid RTNL locking in
critical sections. Patches have been prepared by Marek Lindner
and Sven Eckelmann
- Enable automatic module loading for genl requests, by Sven Eckelmann
- Fix a potential race condition on interface removal. This is not
happening very often in practice, but requires bigger changes to fix,
so we are sending this to net-next. By Linus Luessing
====================
Jarno Rajahalme [Fri, 18 Nov 2016 23:40:42 +0000 (15:40 -0800)]
af_packet: Use virtio_net_hdr_from_skb() directly.
Remove static function __packet_rcv_vnet(), which only called
virtio_net_hdr_from_skb() and BUG()ged out if an error code was
returned. Instead, call virtio_net_hdr_from_skb() from the former
call sites of __packet_rcv_vnet() and actually use the error handling
code that is already there.
Jarno Rajahalme [Fri, 18 Nov 2016 23:40:41 +0000 (15:40 -0800)]
af_packet: Use virtio_net_hdr_to_skb().
Use the common virtio_net_hdr_to_skb() instead of open coding it.
Other call sites were changed by commit fd2a0437dc, but this one was
missed, maybe because it is split in two parts of the source code.
Interim comparisons of 'vnet_hdr->gso_type' still work as both the
vnet_hdr and skb notion of gso_type is zero when there is no gso.
Fixes: fd2a0437dc ("virtio_net: introduce virtio_net_hdr_{from,to}_skb") Signed-off-by: Jarno Rajahalme <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jarno Rajahalme [Fri, 18 Nov 2016 23:40:38 +0000 (15:40 -0800)]
virtio_net: Simplify call sites for virtio_net_hdr_{from, to}_skb().
No point storing the return value of virtio_net_hdr_to_skb() or
virtio_net_hdr_from_skb() to a variable when the value is used only
once as a boolean in an immediately following if statement.
Brian Norris [Fri, 18 Nov 2016 14:00:32 +0000 (19:30 +0530)]
mwifiex: sdio: don't check for NULL sdio_func
sdio_func is retrieved via container_of() and should never be NULL.
Checking for NULL just makes the logic more confusing than necessary.
Stop doing that.
Xinming Hu [Fri, 18 Nov 2016 14:00:30 +0000 (19:30 +0530)]
mwifiex: reset card->adapter during device unregister
card->adapter gets initialized in mwifiex_register_dev(). As it's not
cleared in mwifiex_unregister_dev(), we may end up accessing the memory
which is already free in below scenario.
Scenario: Driver initialization is failed due to incorrect firmware or
some other reason. Meanwhile device reboot/unload occurs.
This is safe, now that we've properly synchronized suspend() and
remove() with the FW initialization thread; now that code can simply
check for 'card->adapter == NULL' and exit safely.
Brian Norris [Fri, 18 Nov 2016 14:00:26 +0000 (19:30 +0530)]
mwifiex: resolve races between async FW init (failure) and device removal
It's possible for the FW init sequence to fail, which will trigger a
device cleanup sequence in mwifiex_fw_dpc(). This sequence can race with
device suspend() or remove() (e.g., reboot or unbind), and can trigger
use-after-free issues. Currently, this driver attempts (poorly) to
synchronize remove() using a semaphore, but it doesn't protect some of
the critical sections properly. Particularly, we grab a pointer to the
adapter struct (card->adapter) without checking if it's being freed or
not. We later do a NULL check on the adapter, but that doesn't work if
the adapter was freed.
Also note that the PCIe interface driver doesn't ever set card->adapter
to NULL, so even if we get the synchronization right, we still might try
to redo the cleanup in ->remove(), even if the FW init failure sequence
already did it.
This patch replaces the static semaphore with a per-device completion
struct, and uses that completion to synchronize the remove() thread with
the mwifiex_fw_dpc(). A future patch will utilize this completion to
synchronize the suspend() thread as well.
Shengzhen Li [Fri, 18 Nov 2016 14:00:25 +0000 (19:30 +0530)]
mwifiex: complete blocked power save handshake in main process
Power save handshake with firmware might be blocked by on-going
data transfer.
this patch check the PS status in main process and complete
previous blocked PS handshake.
this patch also remove redudant check before call
mwifiex_check_ps_cond function.
Shengzhen Li [Fri, 18 Nov 2016 14:00:24 +0000 (19:30 +0530)]
mwifiex: check tx_hw_pending before downloading sleep confirm
We may get SLEEP event from firmware even if TXDone interrupt
for last Tx packet is still pending. In this case, we may
end up accessing PCIe memory for handling TXDone after power
save handshake is completed. This causes kernel crash with
external abort.
This patch will only allow downloading sleep confirm
when no tx done interrupt is pending in the hardware.
Rajat Jain [Tue, 15 Nov 2016 13:36:04 +0000 (19:06 +0530)]
mwifiex: Enable WoWLAN for both sdio and pcie
Commit ce4f6f0c353b ("mwifiex: add platform specific wakeup interrupt
support") added WoWLAN feature only for sdio. This patch moves that
code to the common module so that all the interface drivers can use
it for free. It enables pcie and sdio for its use currently.
Rajat Jain [Tue, 15 Nov 2016 13:36:03 +0000 (19:06 +0530)]
mwifiex: Introduce mwifiex_probe_of() to parse common properties
Introduce function mwifiex_probe_of() to parse common properties.
Interface drivers get to decide whether or not the device tree node
was a valid one (depending on the compatible property),
Lets fill "adapter->dt_node" in mwifiex_add_card().
The function mwifiex_probe_of() is currently only a place holder with
the next patch adding content to it.
Rajat Jain [Tue, 15 Nov 2016 13:36:02 +0000 (19:06 +0530)]
mwifiex: Allow mwifiex early access to device structure
Today all the interface drivers (usb/pcie/sdio) assign the
adapter->dev in the register_dev() callback, although they
have this piece of info well before hand.
This patch makes the device structure available for mwifiex
right at the beginning, so that it can be used for early
initialization if needed.
This is needed for subsequent patches in this patchset that
intend to unify and consolidate some of the code that would
otherwise have to be duplicated among the interface drivers
(sdio, pcie, usb).
Xinming Hu [Fri, 18 Nov 2016 12:37:04 +0000 (18:07 +0530)]
mwifiex: parse device tree node for PCIe
This patch derives device tree node from pcie bus layer framework.
Device tree bindings file has been renamed(marvell-sd8xxx.txt ->
marvell-8xxx.txt) to accommodate PCIe changes.
Linus Torvalds [Sat, 19 Nov 2016 01:21:58 +0000 (17:21 -0800)]
Merge tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"They fix an ACPI thermal management regression introduced by a recent
FADT handling cleanup, an ACPI tools build issue introduced by a
recent ACPICA commit and a PCC mailbox initialization bug causing
lockdep to complain loudly.
Specifics:
- Revert a recent ACPICA cleanup that attempted to get rid of all
FADT version 2 legacy, but broke ACPI thermal management on at
least one system (Rafael Wysocki).
- Fix cross-compiled builds of ACPI tools that stopped working after
a recent cleanup related to the handling of header files in ACPICA
(Lv Zheng).
- Fix a locking issue in the PCC channel initialization code that
invokes devm_request_irq() under a spinlock (among other things)
and causes lockdep to complain (Hoan Tran)"
* tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power/acpi: Remove direct kernel source include reference
mailbox: PCC: Fix lockdep warning when request PCC channel
Revert "ACPICA: FADT support cleanup"
Linus Torvalds [Sat, 19 Nov 2016 00:45:21 +0000 (16:45 -0800)]
Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fixes from Michal Marek:
"Here are some regression fixes for kbuild:
- modversion support for exported asm symbols (Nick Piggin). The
affected architectures need separate patches adding
asm-prototypes.h.
- fix rebuilds of lib-ksyms.o (Nick Piggin)
- -fno-PIE builds (Sebastian Siewior and Borislav Petkov). This is
not a kernel regression, but one of the Debian gcc package.
Nevertheless, it's quite annoying, so I think it should go into
mainline and stable now"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Steal gcc's pie from the very beginning
kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL
x86/kexec: add -fno-PIE
scripts/has-stack-protector: add -fno-PIE
kbuild: add -fno-PIE
kbuild: modversions for EXPORT_SYMBOL() for asm
kbuild: prevent lib-ksyms.o rebuilds
David S. Miller [Fri, 18 Nov 2016 19:33:26 +0000 (11:33 -0800)]
Merge branch 'sparc-lockdep-small'
Babu Moger says:
====================
Adjust lockdep static allocations for sparc
These patches limit the static allocations for lockdep data structures
used for debugging locking correctness. For sparc, all the kernel's code,
data, and bss, must have locked translations in the TLB so that we don't
get TLB misses on kernel code and data. Current sparc chips have 8 TLB
entries available that may be locked down, and with a 4mb page size,
this gives a maximum of 32MB. With PROVE_LOCKING we could go over this
limit and cause system boot-up problems. These patches limit the static
allocations so that everything fits in current required size limit.
patch 1 : Adds new config parameter CONFIG_PROVE_LOCKING_SMALL
Patch 2 : Adjusts the sizes based on the new config parameter
v2-> v3:
Some more comments from Sam Ravnborg and Peter Zijlstra.
Defined PROVE_LOCKING_SMALL as invisible and moved the selection to
arch/sparc/Kconfig.
v1-> v2:
As suggested by Peter Zijlstra, keeping the default as is.
Introduced new config variable CONFIG_PROVE_LOCKING_SMALL
to handle sparc specific case.
Babu Moger [Wed, 2 Nov 2016 16:36:32 +0000 (09:36 -0700)]
config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc
This new config parameter limits the space used for "Lock debugging:
prove locking correctness" by about 4MB. The current sparc systems have
the limitation of 32MB size for kernel size including .text, .data and
.bss sections. With PROVE_LOCKING feature, the kernel size could grow
beyond this limit and causing system boot-up issues. With this option,
kernel limits the size of the entries of lock_chains, stack_trace etc.,
so that kernel fits in required size limit. This is not visible to user
and only used for sparc.
NFSv4.1: Handle NFS4ERR_OLD_STATEID in nfs4_reclaim_open_state
Now that we're doing TEST_STATEID in nfs4_reclaim_open_state(), we can have
a NFS4ERR_OLD_STATEID returned from nfs41_open_expired() . Instead of
marking state recovery as failed, mark the state for recovery again.
Tushar Dave [Mon, 17 Oct 2016 20:57:00 +0000 (13:57 -0700)]
sunbmac: Fix compiler warning
sunbmac uses '__u32' for dma handle while invoking kernel DMA APIs,
instead of using dma_addr_t. This hasn't caused any 'incompatible
pointer type' warning on SPARC because until now dma_addr_t is of
type u32. However, recent changes in SPARC ATU (iommu) enables 64bit
DMA and therefore dma_addr_t becomes of type u64. This makes
'incompatible pointer type' warnings inevitable.
e.g.
drivers/net/ethernet/sun/sunbmac.c: In function ‘bigmac_ether_init’:
drivers/net/ethernet/sun/sunbmac.c:1166: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’
Tushar Dave [Mon, 17 Oct 2016 20:56:59 +0000 (13:56 -0700)]
sunqe: Fix compiler warnings
sunqe uses '__u32' for dma handle while invoking kernel DMA APIs,
instead of using dma_addr_t. This hasn't caused any 'incompatible
pointer type' warning on SPARC because until now dma_addr_t is of
type u32. However, recent changes in SPARC ATU (iommu) enables 64bit
DMA and therefore dma_addr_t becomes of type u64. This makes
'incompatible pointer type' warnings inevitable.
e.g.
drivers/net/ethernet/sun/sunqe.c: In function ‘qec_ether_init’:
drivers/net/ethernet/sun/sunqe.c:883: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’
drivers/net/ethernet/sun/sunqe.c:885: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type
./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’
ATU (Address Translation Unit) is a new IOMMU in SPARC supported with
sun4v hypervisor PCI IOMMU v2 APIs.
Current SPARC IOMMU supports only 32bit address ranges and one TSB
per PCIe root complex that has a 2GB per root complex DVMA space
limit. The limit has become a scalability bottleneck nowadays that
a typical 10G/40G NIC can consume 500MB DVMA space per instance.
When DVMA resource is exhausted, devices will not be usable
since the driver can't allocate DVMA.
For example, we recently experienced legacy IOMMU limitation while
using i40e driver in system with large number of CPUs (e.g. 128).
Four ports of i40e, each request 128 QP (Queue Pairs). Each queue has
512 (default) descriptors. So considering only RX queues (because RX
premap DMA buffers), i40e takes 4*128*512 number of DMA entries in
IOMMU table. Legacy IOMMU can have at max (2G/8K)- 1 entries available
in table. So bringing up four instance of i40e alone saturate existing
IOMMU resource.
ATU removes bottleneck by allowing guest os to create IOTSB of size
32G (or more) with 64bit address ranges available in ATU HW. 32G is
more than enough DVMA space to be shared by all PCIe devices under
root complex contrast to 2G space provided by legacy IOMMU.
ATU allows PCIe devices to use 64bit DMA addressing. Devices
which choose to use 32bit DMA mask will continue to work with the
existing legacy IOMMU.
The patch set is tested on sun4v (T1000, T2000, T3, T4, T5, T7, S7)
and sun4u SPARC.
Thanks.
-Tushar
v2->v3:
- Patch #5 addresses comment by Joe Perches.
-- use %s, __func__ instead of embedding the function name.
v1->v2:
- Patch #2 addresses comments by Dave M.
-- use page allocator to allocate IOTSB.
-- use true/false with boolean variables.
====================
Tushar Dave [Fri, 28 Oct 2016 17:12:41 +0000 (10:12 -0700)]
sparc64: Add ATU (new IOMMU) support
ATU (Address Translation Unit) is a new IOMMU in SPARC supported with
Hypervisor IOMMU v2 APIs.
Current SPARC IOMMU supports only 32bit address ranges and one TSB
per PCIe root complex that has a 2GB per root complex DVMA space
limit. The limit has become a scalability bottleneck nowadays that
a typical 10G/40G NIC can consume 300MB-500MB DVMA space per
instance. When DVMA resource is exhausted, devices will not be usable
since the driver can't allocate DVMA.
ATU removes bottleneck by allowing guest os to create IOTSB of size
32G (or more) with 64bit address ranges available in ATU HW. 32G is
more than enough DVMA space to be shared by all PCIe devices under
root complex contrast to 2G space provided by legacy IOMMU.
ATU allows PCIe devices to use 64bit DMA addressing. Devices
which choose to use 32bit DMA mask will continue to work with the
existing legacy IOMMU.
Sabrina Dubroca [Fri, 18 Nov 2016 14:50:39 +0000 (15:50 +0100)]
rtnetlink: fix FDB size computation
Add missing NDA_VLAN attribute's size.
Fixes: 1e53d5bb8878 ("net: Pass VLAN ID to rtnl_fdb_notify.") Signed-off-by: Sabrina Dubroca <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Allocate resources dynamically for Upper layer driver's (ULD) like
cxgbit, iw_cxgb4, cxgb4i and chcr. The resources allocated include Tx
queues which are allocated when ULD register with cxgb4 driver and freed
while un-registering. The Tx queues which are shared by ULD shall be
allocated by first registering driver and un-allocated by last
unregistering driver.
Dan Carpenter [Fri, 18 Nov 2016 11:47:35 +0000 (14:47 +0300)]
liquidio CN23XX: bitwise vs logical AND typo
We obviously intended a bitwise AND here, not a logical one.
Fixes: 8c978d059224 ("liquidio CN23XX: Mailbox support") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Fri, 18 Nov 2016 19:00:27 +0000 (14:00 -0500)]
Merge tag 'mac80211-for-davem-2016-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A few more bugfixes:
* limit # of scan results stored in memory - this is a long-standing bug
Jouni and I only noticed while discussing other things in Santa Fe
* revert AP_LINK_PS patch that was causing issues (Felix)
* various A-MSDU/A-MPDU fixes for TXQ code (Felix)
* interoperability workaround for peers with broken VHT capabilities
(Filip Matusiak)
* add bitrate definition for a VHT MCS that's supposed to be invalid
but gets used by some hardware anyway (Thomas Pedersen)
* beacon timer fix in hwsim (Benjamin Beichler)
====================
WANG Cong [Thu, 17 Nov 2016 23:55:26 +0000 (15:55 -0800)]
af_unix: conditionally use freezable blocking calls in read
Commit 2b15af6f95 ("af_unix: use freezable blocking calls in read")
converts schedule_timeout() to its freezable version, it was probably
correct at that time, but later, commit 2b514574f7e8
("net: af_unix: implement splice for stream af_unix sockets") breaks
the strong requirement for a freezable sleep, according to
commit 0f9548ca1091:
We shouldn't try_to_freeze if locks are held. Holding a lock can cause a
deadlock if the lock is later acquired in the suspend or hibernate path
(e.g. by dpm). Holding a lock can also cause a deadlock in the case of
cgroup_freezer if a lock is held inside a frozen cgroup that is later
acquired by a process outside that group.
The pipe_lock is still held at that point.
So use freezable version only for the recvmsg call path, avoid impact for
Android.
David S. Miller [Fri, 18 Nov 2016 18:54:22 +0000 (13:54 -0500)]
Merge branch 'net-marvell-freescale-compile-test'
Florian Fainelli says:
====================
net: Enable COMPILE_TEST for Marvell & Freescale drivers
This patch series allows building the Freescale and Marvell Ethernet network
drivers with COMPILE_TEST.
Changes in v4:
- add proper HAS_DMA to fix build errors on m32r
- provide an inline stub for mvebu_mbus_get_dram_win_info
- added an additional patch to fix build errors with mv88e6xxx on m32r
Changes in v3:
- reorder patches to avoid introducing a build warning between commits
Changes in v2:
- rename register define clash when building for i386 (spotted by LKP)
====================
Florian Fainelli [Thu, 17 Nov 2016 19:19:13 +0000 (11:19 -0800)]
net: marvell: Allow drivers to be built with COMPILE_TEST
All Marvell Ethernet drivers actually build fine with COMPILE_TEST with
a few warnings. We need to add a few HAS_DMA dependencies to fix linking
failures on problematic architectures like m32r.
In file included from arch/x86/include/uapi/asm/ptrace.h:5:0,
from arch/x86/include/asm/ptrace.h:6,
from arch/x86/include/asm/math_emu.h:4,
from arch/x86/include/asm/processor.h:11,
from include/linux/mutex.h:19,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:15,
from include/linux/kobject.h:21,
from include/linux/device.h:17,
from
drivers/net/ethernet/freescale/gianfar_ptp.c:23:
arch/x86/include/uapi/asm/ptrace-abi.h:15:0: note: this is the
location of the previous definition
#define FS 9
David S. Miller [Fri, 18 Nov 2016 18:48:54 +0000 (13:48 -0500)]
Merge branch 'cpsw-fixes'
Johan Hovold says:
====================
net: cpsw: fix leaks and probe deferral
This series fixes as number of leaks and issues in the cpsw probe-error
and driver-unbind paths, some which specifically prevented deferred
probing.
v2
- Keep platform device runtime-resumed throughout probe instead of
resuming in the probe error path as suggested by Grygorii (patch
1/7).
- Runtime-resume platform device before registering any children in
order to make sure it is synchronously suspended after deregistering
children in the error path (patch 3/7).
====================
Make sure to propagate errors from of_phy_register_fixed_link() which
can fail with -EPROBE_DEFER.
Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link
PHY") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Johan Hovold [Thu, 17 Nov 2016 16:40:03 +0000 (17:40 +0100)]
net: ethernet: ti: cpsw: add missing sanity check
Make sure to check for allocation failures before dereferencing a
NULL-pointer during probe.
Fixes: 649a1688c960 ("net: ethernet: ti: cpsw: create common struct to
hold shared driver data") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Make sure to deregister the primary device in case the secondary emac
fails to probe.
kernel BUG at /home/johan/work/omicron/src/linux/net/core/dev.c:7743!
...
[<c05b3dec>] (free_netdev) from [<c04fe6c0>] (cpsw_probe+0x9cc/0xe50)
[<c04fe6c0>] (cpsw_probe) from [<c047b28c>] (platform_drv_probe+0x5c/0xc0)
Fixes: d9ba8f9e6298 ("driver: net: ethernet: cpsw: dual emac interface
implementation") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Johan Hovold [Thu, 17 Nov 2016 16:40:01 +0000 (17:40 +0100)]
net: ethernet: ti: cpsw: fix of_node and phydev leaks
Make sure to drop references taken and deregister devices registered
during probe on probe errors (including deferred probe) and driver
unbind.
Specifically, PHY of-node references were never released and fixed-link
PHY devices were never deregistered.
Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link
PHY") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Johan Hovold [Thu, 17 Nov 2016 16:40:00 +0000 (17:40 +0100)]
net: ethernet: ti: cpsw: fix deferred probe
Make sure to deregister all child devices also on probe errors to avoid
leaks and to fix probe deferral:
cpsw 4a100000.ethernet: omap_device: omap_device_enable() called from invalid state 1
cpsw 4a100000.ethernet: use pm_runtime_put_sync_suspend() in driver?
cpsw: probe of 4a100000.ethernet failed with error -22
Add generic helper to undo the effects of cpsw_probe_dt(), which will
also be used in a follow-on patch to fix further leaks that have been
introduced more recently.
Note that the platform device is now runtime-resumed before registering
any child devices in order to make sure that it is synchronously
suspended after having deregistered the children in the error path.
Fixes: 1fb19aa730e4 ("net: cpsw: Add parent<->child relation support
between cpsw and mdio") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Make sure to drop the reference taken by of_find_device_by_node() when
looking up an mdio device from a phy_id property during probe.
Fixes: 549985ee9c72 ("cpsw: simplify the setup of the register
pointers") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Johan Hovold [Thu, 17 Nov 2016 16:39:58 +0000 (17:39 +0100)]
net: ethernet: ti: cpsw: fix bad register access in probe error path
Make sure to keep the platform device runtime-resumed throughout probe
to avoid accessing the CPSW registers in the error path (e.g. for
deferred probe) with clocks disabled:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0872d08
...
[<c04fabcc>] (cpsw_ale_control_set) from [<c04fb8b4>] (cpsw_ale_destroy+0x2c/0x44)
[<c04fb8b4>] (cpsw_ale_destroy) from [<c04fea58>] (cpsw_probe+0xbd0/0x10c4)
[<c04fea58>] (cpsw_probe) from [<c047b2a0>] (platform_drv_probe+0x5c/0xc0)
Fixes: df828598a755 ("netdev: driver: ethernet: Add TI CPSW driver") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This is caused by the sky2 being called after it has been shutdown.
A previous thread about this can be found here:
https://lkml.org/lkml/2016/4/12/410
An alternative fix is to assure that IFF_UP gets cleared by
calling dev_close() during shutdown. This is similar to what the
bnx2/tg3/xgene and maybe others are doing to assure that the driver
isn't being called following _shutdown().
Trond Myklebust [Mon, 14 Nov 2016 16:19:55 +0000 (11:19 -0500)]
NFSv4: Fix CLOSE races with OPEN
If the reply to a successful CLOSE call races with an OPEN to the same
file, we can end up scribbling over the stateid that represents the
new open state.
The race looks like:
Client Server
====== ======
CLOSE stateid A on file "foo"
CLOSE stateid A, return stateid C
OPEN file "foo"
OPEN "foo", return stateid B
Receive reply to OPEN
Reset open state for "foo"
Associate stateid B to "foo"
Receive CLOSE for A
Reset open state for "foo"
Replace stateid B with C
The fix is to examine the argument of the CLOSE, and check for a match
with the current stateid "other" field. If the two do not match, then
the above race occurred, and we should just ignore the CLOSE.
David S. Miller [Fri, 18 Nov 2016 17:12:15 +0000 (12:12 -0500)]
Merge branch 'ethtool-phy-downshift'
Allan W. Nielsen says:
====================
Adding PHY-Tunables and downshift support
(This is a re-post of the v3 patch set with a new cover letter - I was not
aware that the cover letters was used a commit comments in merge commits).
This series add support for PHY tunables, and uses this facility to
configure downshifting. The downshifting mechanism is implemented for MSCC
phys.
This series tries to address the comments provided back in mid October when
this feature was posted along with fast-link-failure. Fast-link-failure has
been separated out, but we would like to pick continue on that if/when we
agree on how the phy-tunables and downshifting should be done.
The proposed generic interface is similar to
ETHTOOL_GTUNABLE/ETHTOOL_STUNABLE, it uses the same type
(ethtool_tunable/tunable_type_id) but a new enum (phy_tunable_id) is added
to reflect the PHY tunable.
The implementation just call the newly added function pointers in
get_tunable/set_tunable phy_device structure.
To configure downshifting, the ethtool_tunable structure is used. 'id' must
be set to 'ETHTOOL_PHY_DOWNSHIFT', 'type_id' must be set to
'ETHTOOL_TUNABLE_U8' and 'data' value configure the amount of downshift
re-tries.
If configured to DOWNSHIFT_DEV_DISABLE, then downshift is disabled If
configured to DOWNSHIFT_DEV_DEFAULT_COUNT, then it is up to the device to
choose a device-specific re-try count.
Tested on Beaglebone Black with VSC 8531 PHY.
Change set:
v0:
- Link Speed downshift and Fast Link failure-2 features coded by using
Device tree.
v1:
- Split the Downshift and FLF2 features in different set of patches.
- Removed DT access and implemented IOCTL access suggested by Andrew.
- Added function pointers in get_tunable/set_tunable phy_device structure
v2:
- Added trace message with a hist is printed when downshifting clould not
be eanbled with the requested count
- (ethtool) Syntax is changed from "--set-phy-tunable downshift on|off|%d"
to "--set-phy-tunable [downshift on|off [count N]]" - as requested by
Andrew.
v3:
- Fixed Spelling in "net: phy: Add downshift get/set support in Microsemi
PHYs driver"
====================
Raju Lakkaraju [Thu, 17 Nov 2016 12:07:22 +0000 (13:07 +0100)]
ethtool: (uapi) Add ETHTOOL_PHY_DOWNSHIFT to PHY tunables
For operation in cabling environments that are incompatible with
1000BASE-T, PHY device may provide an automatic link speed downshift
operation. When enabled, the device automatically changes its 1000BASE-T
auto-negotiation to the next slower speed after a configured number of
failed attempts at 1000BASE-T. This feature is useful in setting up in
networks using older cable installations that include only pairs A and B,
and not pairs C and D.
projects / linux.git / log