iov_iter: add copy_page_to_iter_nofault()

Provide a means to copy a page to user space from an iterator, aborting if
a page fault would occur.  This supports compound pages, but may be passed
a tail page with an offset extending further into the compound page, so we
cannot pass a folio.

This allows for this function to be called from atomic context and _try_
to user pages if they are faulted in, aborting if not.

The function does not use _copy_to_iter() in order to not specify
might_fault(), this is similar to copy_page_from_iter_atomic().

This is being added in order that an iteratable form of vread() can be
implemented while holding spinlocks.

Link: https://lkml.kernel.org/r/19734729defb0f498a76bdec1bef3ac48a3af3e8.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/proc/kcore: convert read_kcore() to read_kcore_iter()

For the time being we still use a bounce buffer for vread(), however in
the next patch we will convert this to interact directly with the iterator
and eliminate the bounce buffer altogether.

Link: https://lkml.kernel.org/r/ebe12c8d70eebd71f487d80095605f3ad0d1489c.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/proc/kcore: avoid bounce buffer for ktext data

Patch series "convert read_kcore(), vread() to use iterators", v8.

While reviewing Baoquan's recent changes to permit vread() access to
vm_map_ram regions of vmalloc allocations, Willy pointed out [1] that it
would be nice to refactor vread() as a whole, since its only user is
read_kcore() and the existing form of vread() necessitates the use of a
bounce buffer.

This patch series does exactly that, as well as adjusting how we read the
kernel text section to avoid the use of a bounce buffer in this case as
well.

This has been tested against the test case which motivated Baoquan's
changes in the first place [2] which continues to function correctly, as
do the vmalloc self tests.

This patch (of 4):

Commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data")
introduced the use of a bounce buffer to retrieve kernel text data for
/proc/kcore in order to avoid failures arising from hardened user copies
enabled by CONFIG_HARDENED_USERCOPY in check_kernel_text_object().

We can avoid doing this if instead of copy_to_user() we use
_copy_to_user() which bypasses the hardening check.  This is more
efficient than using a bounce buffer and simplifies the code.

We do so as part an overall effort to eliminate bounce buffer usage in the
function with an eye to converting it an iterator read.

Link: https://lkml.kernel.org/r/cover.1679566220.git.lstoakes@gmail.com
Link: https://lore.kernel.org/all/Y8WfDSRkc%2FOHP3oD@casper.infradead.org/
Link: https://lore.kernel.org/all/87ilk6gos2.fsf@oracle.com/T/#u
Link: https://lkml.kernel.org/r/fd39b0bfa7edc76d360def7d034baaee71d90158.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_alloc: make deferred page init free pages in MAX_ORDER blocks

Normal page init path frees pages during the boot in MAX_ORDER chunks, but
deferred page init path does it in pageblock blocks.

Change deferred page init path to work in MAX_ORDER blocks.

For cases when MAX_ORDER is larger than pageblock, set migrate type to
MIGRATE_MOVABLE for all pageblocks covered by the page.

Link: https://lkml.kernel.org/r/20230321002415.20843-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drm/ttm: remove comment referencing now-removed vmf_insert_mixed_prot()

This function no longer exists, however the prot != vma->vm_page_prot case
discussion has been retained and moved to vmf_insert_pfn_prot() so refer
to this instead.

Link: https://lkml.kernel.org/r/db403b3622b94a87bd93528cc1d6b44ae88adcdd.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove vmf_insert_pfn_xxx_prot() for huge page-table entries

This functionality's sole user, the drm ttm module, removed support for it
in commit 0d979509539e ("drm/ttm: remove ttm_bo_vm_insert_huge()") as the
whole approach is currently unworkable without a PMD/PUD special bit and
updates to GUP.

Link: https://lkml.kernel.org/r/604c2ad79659d4b8a6e3e1611c6219d5d3233988.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove unused vmf_insert_mixed_prot()

Patch series "Remove drm/ttm-specific mm changes".

Functionality was added specifically for the DRM TTM driver to support
mapping memory for VM_MIXEDMAP VMAs with customised protection flags,
however this has now been rolled back as issues were found with this
approach.

This series removes the mm changes too, retaining some of the useful
comments.

This patch (of 3):

The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped
using this in commit f91142c62161 ("drm/ttm: nuke VM_MIXEDMAP on BO
mappings v3") citing use of VM_MIXEDMAP in this case being terribly
broken.

Remove this now-dead code and references to it, but retain the useful
description of the prot != vma->vm_page_prot case, moving it to
vmf_insert_pfn_prot() instead.

Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memtest: add results of early memtest to /proc/meminfo

Currently the memtest results were only presented in dmesg.

When running a large fleet of devices without ECC RAM it's currently not
easy to do bulk monitoring for memory corruption.  You have to parse
dmesg, but that's a ring buffer so the error might disappear after some
time.  In general I do not consider dmesg to be a great API to query RAM
status.

In several companies I've seen such errors remain undetected and cause
issues for way too long.  So I think it makes sense to provide a
monitoring API, so that we can safely detect and act upon them.

This adds /proc/meminfo entry which can be easily used by scripts.

Link: https://lkml.kernel.org/r/20230321103430.7130-1-tomas.mudrunka@gmail.com
Signed-off-by: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: extend memblock entry to include MM initialization

and add mm/mm_init.c to memblock entry in MAINTAINERS

Link: https://lkml.kernel.org/r/20230321170513.2401534-15-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: move vmalloc_init() declaration to mm/internal.h

vmalloc_init() is called only from mm_core_init(), there is no need to
declare it in include/linux/vmalloc.h

Move vmalloc_init() declaration to mm/internal.h

Link: https://lkml.kernel.org/r/20230321170513.2401534-14-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: move kmem_cache_init() declaration to mm/slab.h

kmem_cache_init() is called only from mm_core_init(), there is no need to
declare it in include/linux/slab.h

Move kmem_cache_init() declaration to mm/slab.h

Link: https://lkml.kernel.org/r/20230321170513.2401534-13-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: move mem_init_print_info() to mm_init.c

mem_init_print_info() is only called from mm_core_init().

Move it close to the caller and make it static.

Link: https://lkml.kernel.org/r/20230321170513.2401534-12-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

init,mm: fold late call to page_ext_init() to page_alloc_init_late()

When deferred initialization of struct pages is enabled, page_ext_init()
must be called after all the deferred initialization is done, but there is
no point to keep it a separate call from kernel_init_freeable() right
after page_alloc_init_late().

Fold the call to page_ext_init() into page_alloc_init_late() and localize
deferred_struct_pages variable.

Link: https://lkml.kernel.org/r/20230321170513.2401534-11-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: move init_mem_debugging_and_hardening() to mm/mm_init.c

init_mem_debugging_and_hardening() is only called from mm_core_init().

Move it close to the caller, make it static and rename it to
mem_debugging_and_hardening_init() for consistency with surrounding
convention.

Link: https://lkml.kernel.org/r/20230321170513.2401534-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: call {ptlock,pgtable}_cache_init() directly from mm_core_init()

and drop pgtable_init() as it has no real value and its name is
misleading.

Link: https://lkml.kernel.org/r/20230321170513.2401534-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

init,mm: move mm_init() to mm/mm_init.c and rename it to mm_core_init()

Make mm_init() a part of mm/ codebase.  mm_core_init() better describes
what the function does and does not clash with mm_init() in kernel/fork.c

Link: https://lkml.kernel.org/r/20230321170513.2401534-8-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

init: fold build_all_zonelists() and page_alloc_init_cpuhp() to mm_init()

Both build_all_zonelists() and page_alloc_init_cpuhp() must be called
after SMP setup is complete but before the page allocator is set up.

Still, they both are a part of memory management initialization, so move
them to mm_init().

Link: https://lkml.kernel.org/r/20230321170513.2401534-7-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_alloc: rename page_alloc_init() to page_alloc_init_cpuhp()

The page_alloc_init() name is really misleading because all this function
does is sets up CPU hotplug callbacks for the page allocator.

Rename it to page_alloc_init_cpuhp() so that name will reflect what the
function does.

Link: https://lkml.kernel.org/r/20230321170513.2401534-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: handle hashdist initialization in mm/mm_init.c

The hashdist variable must be initialized before the first call to
alloc_large_system_hash() and free_area_init() looks like a better place
for it than page_alloc_init().

Move hashdist handling to mm/mm_init.c

Link: https://lkml.kernel.org/r/20230321170513.2401534-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: move most of core MM initialization to mm/mm_init.c

The bulk of memory management initialization code is spread all over
mm/page_alloc.c and makes navigating through page allocator functionality
difficult.

Move most of the functions marked __init and __meminit to mm/mm_init.c to
make it better localized and allow some more spare room before
mm/page_alloc.c reaches 10k lines.

No functional changes.

Link: https://lkml.kernel.org/r/20230321170513.2401534-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_alloc: add helper for checking if check_pages_enabled

Instead of duplicating long static_branch_enabled(&check_pages_enabled)
wrap it in a helper function is_check_pages_enabled()

Link: https://lkml.kernel.org/r/20230321170513.2401534-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mips: fix comment about pgtable_init()

Patch series "mm: move core MM initialization to mm/mm_init.c", v2.

This set moves most of the core MM initialization to mm/mm_init.c.

This largely includes free_area_init() and its helpers, functions used at
boot time, mm_init() from init/main.c and some of the functions it calls.

Aside from gaining some more space before mm/page_alloc.c hits 10k lines,
this makes mm/page_alloc.c to be mostly about buddy allocator and moves
the init code out of the way, which IMO improves maintainability.

Besides, this allows to move a couple of declarations out of include/linux
and make them private to mm/.

And as an added bonus there a slight decrease in vmlinux size.  For
tinyconfig and defconfig on x86 I've got

tinyconfig:
   text    data     bss     dec     hex filename
 853206  289376 1200128 2342710  23bf36 a/vmlinux
 853198  289344 1200128 2342670  23bf0e b/vmlinux

defconfig:
    text       data     bss     dec          hex filename
26152959 9730634 2170884 38054477 244aa4d a/vmlinux
26152945 9730602 2170884 38054431 244aa1f b/vmlinux

This patch (of 14):

Comment about fixrange_init() says that its called from pgtable_init()
while the actual caller is pagetabe_init().

Update comment to match the code.

Link: https://lkml.kernel.org/r/20230321170513.2401534-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20230321170513.2401534-2-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@linaro.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: add Lorenzo as vmalloc reviewer

I have recently been involved in both reviewing and submitting patches to
the vmalloc code in mm and would be willing and happy to help out with
review going forward if it would be helpful!

Link: https://lkml.kernel.org/r/55f663af6100c84a71a0065ac0ed22463aa340de.1679421959.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: move get_page_from_free_area() to mm/page_alloc.c

The get_page_from_free_area() helper is only used in mm/page_alloc.c so
move it there to reduce noise in include/linux/mmzone.h

Link: https://lkml.kernel.org/r/20230319114214.2133332-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: prefer fault_around_pages to fault_around_bytes

All use of this value is now at page granularity, so specify the variable
as such too.  This simplifies the logic.

We maintain the debugfs entry to ensure that there are no user-visible
changes.

Link: https://lkml.kernel.org/r/4995bad07fe9baa51c786fa0d81819dddfb57654.1679089214.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: refactor do_fault_around()

Patch series "Refactor do_fault_around()"

Refactor do_fault_around() to avoid bitwise tricks and rather difficult to
follow logic.  Additionally, prefer fault_around_pages to
fault_around_bytes as the operations are performed at a base page
granularity.

This patch (of 2):

The existing logic is confusing and fails to abstract a number of bitwise
tricks.

Use ALIGN_DOWN() to perform alignment, pte_index() to obtain a PTE index
and represent the address range using PTE offsets, which naturally make it
clear that the operation is intended to occur within only a single PTE and
prevent spanning of more than one page table.

We rely on the fact that fault_around_bytes will always be page-aligned,
at least one page in size, a power of two and that it will not exceed
PAGE_SIZE * PTRS_PER_PTE in size (i.e.  the address space mapped by a
PTE).  These are all guaranteed by fault_around_bytes_set().

Link: https://lkml.kernel.org/r/cover.1679089214.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d125db1c3665a63b80cea29d56407825482e2262.1679089214.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: compaction: fix the possible deadlock when isolating hugetlb pages

When trying to isolate a migratable pageblock, it can contain several
normal pages or several hugetlb pages (e.g. CONT-PTE 64K hugetlb on arm64)
in a pageblock. That means we may hold the lru lock of a normal page to
continue to isolate the next hugetlb page by isolate_or_dissolve_huge_page()
in the same migratable pageblock.

However in the isolate_or_dissolve_huge_page(), it may allocate a new hugetlb
page and dissolve the old one by alloc_and_dissolve_hugetlb_folio() if the
hugetlb's refcount is zero. That means we can still enter the direct compaction
path to allocate a new hugetlb page under the current lru lock, which
may cause possible deadlock.

To avoid this possible deadlock, we should release the lru lock when
trying to isolate a hugetbl page.  Moreover it does not make sense to take
the lru lock to isolate a hugetlb, which is not in the lru list.

Link: https://lkml.kernel.org/r/7ab3bffebe59fb419234a68dec1e4572a2518563.1678962352.git.baolin.wang@linux.alibaba.com
Fixes: 369fa227c219 ("mm: make alloc_contig_range handle free hugetlb pages")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: William Lam <william.lam@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: compaction: consider the number of scanning compound pages in isolate fail path

commit b717d6b93b54 ("mm: compaction: include compound page count for
scanning in pageblock isolation") added compound page statistics for
scanning in pageblock isolation, to make sure the number of scanned pages
is always larger than the number of isolated pages when isolating
mirgratable or free pageblock.

However, when failing to isolate the pages when scanning the migratable or
free pageblocks, the isolation failure path did not consider the scanning
statistics of the compound pages, which result in showing the incorrect
number of scanned pages in tracepoints or in vmstats which will confuse
people about the page scanning pressure in memory compaction.

Thus we should take into account the number of scanning pages when failing
to isolate the compound pages to make the statistics accurate.

Link: https://lkml.kernel.org/r/73d6250a90707649cc010731aedc27f946d722ed.1678962352.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: William Lam <william.lam@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mremap: simplify vma expansion again

This effectively reverts d014cd7c1c35 ("mm, mremap: fix mremap() expanding
for vma's with vm_ops->close()").  After the recent changes, vma_merge()
is able to handle the expansion properly even when the vma being expanded
has a vm_ops->close operation, so we don't need to special case it
anymore.

Link: https://lkml.kernel.org/r/20230309111258.24079-11-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap: start distinguishing if vma can be removed in mergeability test

Since pre-git times, is_mergeable_vma() returns false for a vma with
vm_ops->close, so that no owner assumptions are violated in case the vma
is removed as part of the merge.

This check is currently very conservative and can prevent merging even
situations where vma can't be removed, such as simple expansion of
previous vma, as evidenced by commit d014cd7c1c35 ("mm, mremap: fix
mremap() expanding for vma's with vm_ops->close()")

In order to allow more merging when appropriate and simplify the code that
was made more complex by commit d014cd7c1c35, start distinguishing cases
where the vma can be really removed, and allow merging with vm_ops->close
otherwise.

As a first step, add a may_remove_vma parameter to is_mergeable_vma().
can_vma_merge_before() sets it to true, because when called from
vma_merge(), a removal of the vma is possible.

In can_vma_merge_after(), pass the parameter as false, because no
removal can occur in each of its callers:
- vma_merge() calls it on the 'prev' vma, which is never removed
- mmap_region() and do_brk_flags() call it to determine if it can expand
  a vma, which is not removed

As a result, vma's with vm_ops->close may now merge with compatible ranges
in more situations than previously.  We can also revert commit
d014cd7c1c35 as the next step to simplify mremap code again.

[vbabka@suse.cz: adjust comment as suggested by Lorenzo]
Link: https://lkml.kernel.org/r/74f2ea6c-f1a9-6dd7-260c-25e660f42379@suse.cz
Link: https://lkml.kernel.org/r/20230309111258.24079-10-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: convert mergeability checks to return bool

The comments already mention returning 'true' so make the code match them.

Link: https://lkml.kernel.org/r/20230309111258.24079-9-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: rename adj_next to adj_start

The variable 'adj_next' holds the value by which we adjust vm_start of a
vma in variable 'adjust', that's either 'next' or 'mid', so the current
name is inaccurate.  Rename it to 'adj_start'.

Link: https://lkml.kernel.org/r/20230309111258.24079-8-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: set mid to NULL if not applicable

There are several places where we test if 'mid' is really the area NNNN in
the diagram and the tests have two variants and are non-obvious to follow.
Instead, set 'mid' to NULL up-front if it's not the NNNN area, and
simplify the tests.

Also update the description in comment accordingly.

[vbabka@suse.cz: adjust/add comments as suggested by Lorenzo]
Link: https://lkml.kernel.org/r/def43190-53f7-a607-d1b0-b657565f4288@suse.cz
Link: https://lkml.kernel.org/r/20230309111258.24079-7-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: initialize mid and next in natural order

It is more intuitive to go from prev to mid and then next.  No functional
change.

Link: https://lkml.kernel.org/r/20230309111258.24079-6-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: use the proper vma pointer in case 4

Almost all cases now use the 'next' pointer for the vma following the
merged area, and the cases diagram shows it as XXXX.  Case 4 is different
as it uses 'mid' and NNNN, so change it for consistency.  No functional
change.

Link: https://lkml.kernel.org/r/20230309111258.24079-5-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: use the proper vma pointers in cases 1 and 6

Case 1 is now shown in the comment as next vma being merged with prev, so
use 'next' instead of 'mid'.  In case 1 they both point to the same vma.

As a consequence, in case 6, the dup_anon_vma() is now tried first on
'next' and then on 'mid', before it was the opposite order.  This is not a
functional change, as those two vma's cannnot have a different anon_vma,
as that would have prevented the merging in the first place.

Link: https://lkml.kernel.org/r/20230309111258.24079-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: use the proper vma pointer in case 3

In case 3 we we use 'next' for everything but vma_pgoff.  So use 'next'
for that as well, instead of 'mid', for consistency.  Then in case 8 we
have to use 'mid' explicitly, which should also make the intent more
obvious.

Adjust the diagram for cases 1-3 in the comment to match the code - we are
using 'next' for case 3 so mark the range with XXXX instead of NNNN.  For
case 2 that's a no-op as the code doesn't touch 'next' or 'mid'.  For case
1 it's now wrong but that will be fixed next.

No functional change.

Link: https://lkml.kernel.org/r/20230309111258.24079-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap/vma_merge: use only primary pointers for preparing merge

Patch series "cleanup vma_merge() and improve mergeability tests".

My initial goal here was to try making the check for vm_ops->close in
is_mergeable_vma() only be applied for vma's that would be truly removed
as part of the merge (see Patch 9).  This would then allow reverting the
quick fix d014cd7c1c35 ("mm, mremap: fix mremap() expanding for vma's with
vm_ops->close()").  This was successful enough to allow the revert (Patch
10).  Checks using can_vma_merge_before() are still pessimistic about
possible vma removal, and making them precise would probably complicate
the vma_merge() code too much.

Liam's 6.3-rc1 simplification of vma_merge() and removal of __vma_adjust()
was very much helpful in understanding the vma_merge() implementation and
especially when vma removals can happen, which is now very obvious.  While
studing the code, I've found ways to make it hopefully even more easy to
follow, so that's the patches 1-8.  That made me also notice a bug that's
now already fixed in 6.3-rc1.

This patch (of 10):

In the merging preparation part of vma_merge(), some vma pointer variables
are assigned for later execution of the merge, but also read from in the
block itself.  The code is easier follow and check against the cases
diagram in the comment if the code reads only from the "primary" vma
variables prev, mid, next instead.  No functional change.

Link: https://lkml.kernel.org/r/20230309111258.24079-1-vbabka@suse.cz
Link: https://lkml.kernel.org/r/20230309111258.24079-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>]
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: userfaultfd: add UFFDIO_CONTINUE_MODE_WP to install WP PTEs

UFFDIO_COPY already has UFFDIO_COPY_MODE_WP, so when installing a new PTE
to resolve a missing fault, one can install a write-protected one.  This
is useful when using UFFDIO_REGISTER_MODE_{MISSING,WP} in combination.

This was motivated by testing HugeTLB HGM [1], and in particular its
interaction with userfaultfd features.  Existing userfaultfd code supports
using WP and MINOR modes together (i.e.  you can register an area with
both enabled), but without this CONTINUE flag the combination is in
practice unusable.

So, add an analogous UFFDIO_CONTINUE_MODE_WP, which does the same thing as
UFFDIO_COPY_MODE_WP, but for *minor* faults.

Update the selftest to do some very basic exercising of the new flag.

Update Documentation/ to describe how these flags are used (neither the
COPY nor the new CONTINUE versions of this mode flag were described there
before).

[1]: https://patchwork.kernel.org/project/linux-mm/cover/20230218002819.1486479-1-jthoughton@google.com/

Link: https://lkml.kernel.org/r/20230314221250.682452-5-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: userfaultfd: combine 'mode' and 'wp_copy' arguments

Many userfaultfd ioctl functions take both a 'mode' and a 'wp_copy'
argument.  In future commits we plan to plumb the flags through to more
places, so we'd be proliferating the very long argument list even further.

Let's take the time to simplify the argument list.  Combine the two
arguments into one - and generalize, so when we add more flags in the
future, it doesn't imply more function arguments.

Since the modes (copy, zeropage, continue) are mutually exclusive, store
them as an integer value (0, 1, 2) in the low bits.  Place combine-able
flag bits in the high bits.

This is quite similar to an earlier patch proposed by Nadav Amit
("userfaultfd: introduce uffd_flags" [1]).  The main difference is that
patch only handled flags, whereas this patch *also* combines the "mode"
argument into the same type to shorten the argument list.

[1]: https://lore.kernel.org/all/20220619233449.181323-2-namit@vmware.com/

Link: https://lkml.kernel.org/r/20230314221250.682452-4-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: userfaultfd: don't pass around both mm and vma

Quite a few userfaultfd functions took both mm and vma pointers as
arguments.  Since the mm is trivially accessible via vma->vm_mm, there's
no reason to pass both; it just needlessly extends the already long
argument list.

Get rid of the mm pointer, where possible, to shorten the argument list.

Link: https://lkml.kernel.org/r/20230314221250.682452-3-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: userfaultfd: rename functions for clarity + consistency

Patch series "mm: userfaultfd: refactor and add UFFDIO_CONTINUE_MODE_WP",
v5.

- Commits 1-3 refactor userfaultfd ioctl code without behavior changes, with the
  main goal of improving consistency and reducing the number of function args.

- Commit 4 adds UFFDIO_CONTINUE_MODE_WP.

This patch (of 4):

The basic problem is, over time we've added new userfaultfd ioctls, and
we've refactored the code so functions which used to handle only one case
are now re-used to deal with several cases.  While this happened, we
didn't bother to rename the functions.

Similarly, as we added new functions, we cargo-culted pieces of the
now-inconsistent naming scheme, so those functions too ended up with names
that don't make a lot of sense.

A key point here is, "copy" in most userfaultfd code refers specifically
to UFFDIO_COPY, where we allocate a new page and copy its contents from
userspace.  There are many functions with "copy" in the name that don't
actually do this (at least in some cases).

So, rename things into a consistent scheme.  The high level idea is that
the call stack for userfaultfd ioctls becomes:

userfaultfd_ioctl
  -> userfaultfd_(particular ioctl)
    -> mfill_atomic_(particular kind of fill operation)
      -> mfill_atomic    /* loops over pages in range */
        -> mfill_atomic_pte    /* deals with single pages */
          -> mfill_atomic_pte_(particular kind of fill operation)
            -> mfill_atomic_install_pte

There are of course some special cases (shmem, hugetlb), but this is the
general structure which all function names now adhere to.

Link: https://lkml.kernel.org/r/20230314221250.682452-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230314221250.682452-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mips: drop ranges for definition of ARCH_FORCE_MAX_ORDER

MIPS defines insane ranges for ARCH_FORCE_MAX_ORDER allowing MAX_ORDER up
to 63, which implies maximal contiguous allocation size of 2^63 pages.

Drop bogus definitions of ranges for ARCH_FORCE_MAX_ORDER and leave it a
simple integer with sensible defaults.

Users that *really* need to change the value of ARCH_FORCE_MAX_ORDER will
be able to do so but they won't be mislead by the bogus ranges.

Link: https://lkml.kernel.org/r/20230322081520.2516226-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

loongarch: drop ranges for definition of ARCH_FORCE_MAX_ORDER

LoongArch defines insane ranges for ARCH_FORCE_MAX_ORDER allowing
MAX_ORDER up to 63, which implies maximal contiguous allocation size of
2^63 pages.

Drop bogus definitions of ranges for ARCH_FORCE_MAX_ORDER and leave it a
simple integer with sensible defaults.

Users that *really* need to change the value of ARCH_FORCE_MAX_ORDER will
be able to do so but they won't be mislead by the bogus ranges.

Link: https://lkml.kernel.org/r/20230322081727.2516291-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm, treewide: redefine MAX_ORDER sanely

MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.

This definition is counter-intuitive and lead to number of bugs all over
the kernel.

Change the definition of MAX_ORDER to be inclusive: the range of orders
user can ask from buddy allocator is 0..MAX_ORDER now.

[kirill@shutemov.name: fix min() warning]
Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box
[akpm@linux-foundation.org: fix another min_t warning]
[kirill@shutemov.name: fixups per Zi Yan]
Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name
[akpm@linux-foundation.org: fix underlining in docs]
Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

iommu: fix MAX_ORDER usage in __iommu_dma_alloc_pages()

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in __iommu_dma_alloc_pages().

Also use GENMASK() instead of hard to read "(2U << order) - 1" magic.

Link: https://lkml.kernel.org/r/20230315113133.11326-10-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/slub: fix MAX_ORDER usage in calculate_order()

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in calculate_order().

Link: https://lkml.kernel.org/r/20230315113133.11326-9-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_reporting: fix MAX_ORDER usage in page_reporting_register()

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in page_reporting_register().

Link: https://lkml.kernel.org/r/20230315113133.11326-8-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

perf/core: fix MAX_ORDER usage in rb_alloc_aux_page()

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in rb_alloc_aux_page().

Link: https://lkml.kernel.org/r/20230315113133.11326-7-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

genwqe: fix MAX_ORDER usage

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in genwqe driver.

Link: https://lkml.kernel.org/r/20230315113133.11326-6-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drm/i915: fix MAX_ORDER usage in i915_gem_object_get_pages_internal()

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in i915_gem_object_get_pages_internal().

Link: https://lkml.kernel.org/r/20230315113133.11326-5-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

floppy: fix MAX_ORDER usage

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in floppy code.

Also allocation buffer exactly PAGE_SIZE << MAX_ORDER bytes is okay. Fix
MAX_LEN check.

Link: https://lkml.kernel.org/r/20230315113133.11326-4-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Denis Efremov <efremov@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

um: fix MAX_ORDER usage in linux_main()

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in linux_main().

Link: https://lkml.kernel.org/r/20230315113133.11326-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sparc/mm: fix MAX_ORDER usage in tsb_grow()

Patch series "Fix confusion around MAX_ORDER".

MAX_ORDER currently defined as number of orders page allocator supports:
user can ask buddy allocator for page order between 0 and MAX_ORDER-1.

This definition is counter-intuitive and lead to number of bugs all over
the kernel.

Fix the bugs and then change the definition of MAX_ORDER to be
inclusive: the range of orders user can ask from buddy allocator is
0..MAX_ORDER now.

This patch (of 10):

MAX_ORDER is not inclusive: the maximum allocation order buddy allocator
can deliver is MAX_ORDER-1.

Fix MAX_ORDER usage in tsb_grow().

Link: https://lkml.kernel.org/r/20230315113133.11326-1-kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/20230315113133.11326-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: David Miller <davem@davemloft.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: smoke test UFFD_FEATURE_WP_UNPOPULATED

Enable it by default on the stress test, and add some smoke tests for the
pte markers on anonymous.

Link: https://lkml.kernel.org/r/20230309223711.823547-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/uffd: UFFD_FEATURE_WP_UNPOPULATED

Patch series "mm/uffd: Add feature bit UFFD_FEATURE_WP_UNPOPULATED", v4.

The new feature bit makes anonymous memory acts the same as file memory on
userfaultfd-wp in that it'll also wr-protect none ptes.

It can be useful in two cases:

(1) Uffd-wp app that needs to wr-protect none ptes like QEMU snapshot,
    so pre-fault can be replaced by enabling this flag and speed up
    protections

(2) It helps to implement async uffd-wp mode that Muhammad is working on [1]

It's debatable whether this is the most ideal solution because with the
new feature bit set, wr-protect none pte needs to pre-populate the
pgtables to the last level (PAGE_SIZE).  But it seems fine so far to
service either purpose above, so we can leave optimizations for later.

The series brings pte markers to anonymous memory too.  There's some
change in the common mm code path in the 1st patch, great to have some eye
looking at it, but hopefully they're still relatively straightforward.

This patch (of 2):

This is a new feature that controls how uffd-wp handles none ptes.  When
it's set, the kernel will handle anonymous memory the same way as file
memory, by allowing the user to wr-protect unpopulated ptes.

File memories handles none ptes consistently by allowing wr-protecting of
none ptes because of the unawareness of page cache being exist or not.
For anonymous it was not as persistent because we used to assume that we
don't need protections on none ptes or known zero pages.

One use case of such a feature bit was VM live snapshot, where if without
wr-protecting empty ptes the snapshot can contain random rubbish in the
holes of the anonymous memory, which can cause misbehave of the guest when
the guest OS assumes the pages should be all zeros.

QEMU worked it around by pre-populate the section with reads to fill in
zero page entries before starting the whole snapshot process [1].

Recently there's another need raised on using userfaultfd wr-protect for
detecting dirty pages (to replace soft-dirty in some cases) [2].  In that
case if without being able to wr-protect none ptes by default, the dirty
info can get lost, since we cannot treat every none pte to be dirty (the
current design is identify a page dirty based on uffd-wp bit being
cleared).

In general, we want to be able to wr-protect empty ptes too even for
anonymous.

This patch implements UFFD_FEATURE_WP_UNPOPULATED so that it'll make
uffd-wp handling on none ptes being consistent no matter what the memory
type is underneath.  It doesn't have any impact on file memories so far
because we already have pte markers taking care of that.  So it only
affects anonymous.

The feature bit is by default off, so the old behavior will be maintained.
Sometimes it may be wanted because the wr-protect of none ptes will
contain overheads not only during UFFDIO_WRITEPROTECT (by applying pte
markers to anonymous), but also on creating the pgtables to store the pte
markers.  So there's potentially less chance of using thp on the first
fault for a none pmd or larger than a pmd.

The major implementation part is teaching the whole kernel to understand
pte markers even for anonymously mapped ranges, meanwhile allowing the
UFFDIO_WRITEPROTECT ioctl to apply pte markers for anonymous too when the
new feature bit is set.

Note that even if the patch subject starts with mm/uffd, there're a few
small refactors to major mm path of handling anonymous page faults.  But
they should be straightforward.

With WP_UNPOPUATED, application like QEMU can avoid pre-read faults all
the memory before wr-protect during taking a live snapshot.  Quotting from
Muhammad's test result here [3] based on a simple program [4]:

  (1) With huge page disabled
  echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
  ./uffd_wp_perf
  Test DEFAULT: 4
  Test PRE-READ: 1111453 (pre-fault 1101011)
  Test MADVISE: 278276 (pre-fault 266378)
  Test WP-UNPOPULATE: 11712

  (2) With Huge page enabled
  echo always > /sys/kernel/mm/transparent_hugepage/enabled
  ./uffd_wp_perf
  Test DEFAULT: 4
  Test PRE-READ: 22521 (pre-fault 22348)
  Test MADVISE: 4909 (pre-fault 4743)
  Test WP-UNPOPULATE: 14448

There'll be a great perf boost for no-thp case, while for thp enabled with
extreme case of all-thp-zero WP_UNPOPULATED can be slower than MADVISE,
but that's low possibility in reality, also the overhead was not reduced
but postponed until a follow up write on any huge zero thp, so potentially
it is faster by making the follow up writes slower.

[1] https://lore.kernel.org/all/20210401092226.102804-4-andrey.gruzdev@virtuozzo.com/
[2] https://lore.kernel.org/all/Y+v2HJ8+3i%2FKzDBu@x1n/
[3] https://lore.kernel.org/all/d0eb0a13-16dc-1ac1-653a-78b7273781e3@collabora.com/
[4] https://github.com/xzpeter/clibs/blob/master/uffd-test/uffd-wp-perf.c

[peterx@redhat.com: comment changes, oneliner fix to khugepaged]
Link: https://lkml.kernel.org/r/ZB2/8jPhD3fpx5U8@x1n
Link: https://lkml.kernel.org/r/20230309223711.823547-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230309223711.823547-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: suppress recursive reports for HW_TAGS

KASAN suppresses reports for bad accesses done by the KASAN reporting
code.  The reporting code might access poisoned memory for reporting
purposes.

Software KASAN modes do this by suppressing reports during reporting via
current->kasan_depth, the same way they suppress reports during accesses
to poisoned slab metadata.

Hardware Tag-Based KASAN does not use current->kasan_depth, and instead
resets pointer tags for accesses to poisoned memory done by the reporting
code.

Despite that, a recursive report can still happen:

1. On hardware with faulty MTE support. This was observed by Weizhao
   Ouyang on a faulty hardware that caused memory tags to randomly change
   from time to time.

2. Theoretically, due to a previous MTE-undetected memory corruption.

A recursive report can happen via:

1. Accessing a pointer with a non-reset tag in the reporting code, e.g.
   slab->slab_cache, which is what Weizhao Ouyang observed.

2. Theoretically, via external non-annotated routines, e.g. stackdepot.

To resolve this issue, resetting tags for all of the pointers in the
reporting code and all the used external routines would be impractical.

Instead, disable tag checking done by the CPU for the duration of KASAN
reporting for Hardware Tag-Based KASAN.

Without this fix, Hardware Tag-Based KASAN reporting code might deadlock.

[andreyknvl@google.com: disable preemption instead of migration, fix comment typo]
Link: https://lkml.kernel.org/r/d14417c8bc5eea7589e99381203432f15c0f9138.1680114854.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/59f433e00f7fa985e8bf9f7caf78574db16b67ab.1678491668.git.andreyknvl@google.com
Fixes: 2e903b914797 ("kasan, arm64: implement HW_TAGS runtime")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Weizhao Ouyang <ouyangweizhao@zeku.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan, arm64: add arch_suppress_tag_checks_start/stop

Add two new tagging-related routines arch_suppress_tag_checks_start/stop
that suppress MTE tag checking via the TCO register.

These rouines are used in the next patch.

[andreyknvl@google.com: drop __ from mte_disable/enable_tco names]
Link: https://lkml.kernel.org/r/7ad5e5a9db79e3aba08d8f43aca24350b04080f6.1680114854.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/75a362551c3c54b70ae59a3492cabb51c105fa6b.1678491668.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Weizhao Ouyang <ouyangweizhao@zeku.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arm64: mte: rename TCO routines

The TCO related routines are used in uaccess methods and
load_unaligned_zeropad() but are unrelated to both even if the naming
suggest otherwise.

Improve the readability of the code moving the away from uaccess.h and
pre-pending them with "mte".

[andreyknvl@google.com: drop __ from mte_disable/enable_tco names]
Link: https://lkml.kernel.org/r/74d26337b2360733956114069e96ff11c296a944.1680114854.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/a48e7adce1248c0f9603a457776d59daa0ef734b.1678491668.git.andreyknvl@google.com
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Weizhao Ouyang <ouyangweizhao@zeku.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan, arm64: rename tagging-related routines

Rename arch_enable_tagging_sync/async/asymm to
arch_enable_tag_checks_sync/async/asymm, as the new name better reflects
their function.

Also rename kasan_enable_tagging to kasan_enable_hw_tags for the same
reason.

Link: https://lkml.kernel.org/r/069ef5b77715c1ac8d69b186725576c32b149491.1678491668.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Weizhao Ouyang <ouyangweizhao@zeku.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: drop empty tagging-related defines

mm/kasan/kasan.h provides a number of empty defines for a few
arch-specific tagging-related routines, in case the architecture code
didn't define them.

The original idea was to simplify integration in case another architecture
starts supporting memory tagging.  However, right now, if any of those
routines are not provided by an architecture, Hardware Tag-Based KASAN
won't work.

Drop the empty defines, as it would be better to get compiler errors
rather than runtime crashes when adding support for a new architecture.

Also drop empty hw_enable_tagging_sync/async/asymm defines for
!CONFIG_KASAN_HW_TAGS case, as those are only used in mm/kasan/hw_tags.c.

Link: https://lkml.kernel.org/r/bc919c144f8684a7fd9ba70c356ac2a75e775e29.1678491668.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Weizhao Ouyang <ouyangweizhao@zeku.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: return an ERR_PTR from __filemap_get_folio

Instead of returning NULL for all errors, distinguish between:

 - no entry found and not asked to allocated (-ENOENT)
 - failed to allocate memory (-ENOMEM)
 - would block (-EAGAIN)

so that callers don't have to guess the error based on the passed in
flags.

Also pass through the error through the direct callers: filemap_get_folio,
filemap_lock_folio filemap_grab_folio and filemap_get_incore_folio.

[hch@lst.de: fix null-pointer deref]
Link: https://lkml.kernel.org/r/20230310070023.GA13563@lst.de
Link: https://lkml.kernel.org/r/20230310043137.GA1624890@u2004
Link: https://lkml.kernel.org/r/20230307143410.28031-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nilfs2]
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: remove FGP_ENTRY

FGP_ENTRY is unused now, so remove it.

Link: https://lkml.kernel.org/r/20230307143410.28031-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

shmem: open code the page cache lookup in shmem_get_folio_gfp

Use the very low level filemap_get_entry helper to look up the entry in
the xarray, and then:

 - don't bother locking the folio if only doing a userfault notification
 - open code locking the page and checking for truncation in a related
   code block

This will allow to eventually remove the FGP_ENTRY flag.

[hughd@google.com: adjust the new comment line]
Link: https://lkml.kernel.org/r/af178ebb-1076-a38c-1dc1-2a37ccce4a3@google.com
Link: https://lkml.kernel.org/r/20230307143410.28031-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

shmem: shmem_get_partial_folio use filemap_get_entry

To avoid use of the FGP_ENTRY flag, adapt shmem_get_partial_folio() to use
filemap_get_entry() and folio_lock() instead of __filemap_get_folio().
Update "page" in the comments there to "folio".

Link: https://lkml.kernel.org/r/9d1aaa4-1337-fb81-6f37-74ebc96f9ef@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: use filemap_get_entry in filemap_get_incore_folio

filemap_get_incore_folio wants to look at the details of xa_is_value
entries, but doesn't need any of the other logic in filemap_get_folio.
Switch it to use the lower-level filemap_get_entry interface.

Link: https://lkml.kernel.org/r/20230307143410.28031-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: make mapping_get_entry available outside of filemap.c

mapping_get_entry is useful for page cache API users that need to know
about xa_value internals.  Rename it and make it available in pagemap.h.

Link: https://lkml.kernel.org/r/20230307143410.28031-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: don't look at xarray value entries in split_huge_pages_in_file

Patch series "return an ERR_PTR from __filemap_get_folio", v3.

__filemap_get_folio and its wrappers can return NULL for three different
conditions, which in some cases requires the caller to reverse engineer
the decision making.  This is fixed by returning an ERR_PTR instead of
NULL and thus transporting the reason for the failure.  But to make
that work we first need to ensure that no xa_value special case is
returned and thus return the FGP_ENTRY flag.  It turns out that flag
is barely used and can usually be deal with in a better way.

This patch (of 7):

split_huge_pages_in_file never wants to do anything with the special value
enties.  Switch to using filemap_get_folio to not even see them.

Link: https://lkml.kernel.org/r/20230307143410.28031-1-hch@lst.de
Link: https://lkml.kernel.org/r/20230307143410.28031-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: create/destroy cleanup

Set the 'empty' bool directly from the result of the function that
determines its value instead of adding additional logic.

Link: https://lkml.kernel.org/r/20230126215125.4069751-13-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: link blocks across pages

The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list.  Just use a simple
stack, reducing time complexity to constant.

The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed.  This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.

Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:

Before:

  # modprobe dmapool_test
  dmapool test: size:16   blocks:8192   time:57282
  dmapool test: size:64   blocks:8192   time:172562
  dmapool test: size:256  blocks:8192   time:789247
  dmapool test: size:1024 blocks:2048   time:371823
  dmapool test: size:4096 blocks:1024   time:362237

After:

  # modprobe dmapool_test
  dmapool test: size:16   blocks:8192   time:24997
  dmapool test: size:64   blocks:8192   time:26584
  dmapool test: size:256  blocks:8192   time:33542
  dmapool test: size:1024 blocks:2048   time:9022
  dmapool test: size:4096 blocks:1024   time:6045

The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life.  For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.

[kbusch@kernel.org: push new blocks in ascending order]
Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: don't memset on free twice

If debug is enabled, dmapool will poison the range, so no need to clear it
to 0 immediately before writing over it.

Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: simplify freeing

The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function.  Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.

Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: consolidate page initialization

Various fields of the dma pool are set in different places. Move it all
to one function.

Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: rearrange page alloc failure handling

Handle the error in a condition so the good path can be in the normal
flow.

Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: move debug code to own functions

Clean up the normal path by moving the debug code outside it.

Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: speedup DMAPOOL_DEBUG with init_on_alloc

Avoid double-memset of the same allocated memory in dma_pool_alloc() when
both DMAPOOL_DEBUG is enabled and init_on_alloc=1.

Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: cleanup integer types

To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places.  Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.

Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: use sysfs_emit() instead of scnprintf()

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: remove checks for dev == NULL

dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device.  But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops.  So remove the checks for pool->dev == NULL since they are
unneeded bloat.

[kbusch@kernel.org: add check for null dev on create]
Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool: add alloc/free performance test

Patch series "dmapool enhancements", v4.

Time spent in dma_pool alloc/free increases linearly with the number of
pages backing the pool.  We can reduce this to constant time with minor
changes to how free pages are tracked.

This patch (of 12):

Provide a module that allocates and frees many blocks of various sizes and
report how long it takes.  This is intended to provide a consistent way to
measure how changes to the dma_pool_alloc/free routines affect timing.

Link: https://lkml.kernel.org/r/20230126215125.4069751-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-2-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: fix a potential concurrency bug in RCU mode

There is a concurrency bug that may cause the wrong value to be loaded
when a CPU is modifying the maple tree.

CPU1:
mtree_insert_range()
  mas_insert()
    mas_store_root()
      ...
      mas_root_expand()
        ...
        rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node));
        ma_set_meta(node, maple_leaf_64, 0, slot);    <---IP

CPU2:
mtree_load()
  mtree_lookup_walk()
    ma_data_end();

When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.

An example of triggering the bug:

Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().

static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}

mt_init_flags(&tree, MT_FLAGS_USE_RCU);
mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL);
run_thread(work)
mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL);

In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL.  Fix
it by put ma_set_meta() before rcu_assign_pointer().

Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: fix get wrong data_end in mtree_lookup_walk()

if (likely(offset > end))
max = pivots[offset];

The above code should be changed to if (likely(offset < end)), which is
correct.  This affects the correctness of ma_data_end().  Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.

Link: https://lkml.kernel.org/r/20230314124203.91572-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230314124203.91572-2-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()

The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption.  The only place we have found where this
happens is in the swapoff path.  This case can be described as below:

core 0                       core 1
swapoff

del_from_avail_list(si)      waiting

try lock si->lock            acquire swap_avail_lock
                             and re-add si into
                             swap_avail_head

acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.

It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g.  stress-ng-swap).

However, in the worst case, panic can be caused by the above scene.  In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap.  This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)

------------[ cut here ]------------
top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a
prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d
next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a
WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70
Modules linked in: rfkill(E) crct10dif_ce(E)...
CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+
Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015
pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
pc : plist_check_prev_next_node+0x50/0x70
lr : plist_check_prev_next_node+0x50/0x70
sp : ffff0018009d3c30
x29: ffff0018009d3c40 x28: ffff800011b32a98
x27: 0000000000000000 x26: ffff001803908000
x25: ffff8000128ea088 x24: ffff800011b32a48
x23: 0000000000000028 x22: ffff001800875c00
x21: ffff800010f9e520 x20: ffff001800875c00
x19: ffff001800fdc6e0 x18: 0000000000000030
x17: 0000000000000000 x16: 0000000000000000
x15: 0736076307640766 x14: 0730073007380731
x13: 0736076307640766 x12: 0730073007380731
x11: 000000000004058d x10: 0000000085a85b76
x9 : ffff8000101436e4 x8 : ffff800011c8ce08
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff0017df9ed338 x4 : 0000000000000001
x3 : ffff8017ce62a000 x2 : ffff0017df9ed340
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
 plist_check_prev_next_node+0x50/0x70
 plist_check_head+0x80/0xf0
 plist_add+0x28/0x140
 add_to_avail_list+0x9c/0xf0
 _enable_swap_info+0x78/0xb4
 __do_sys_swapon+0x918/0xa10
 __arm64_sys_swapon+0x20/0x30
 el0_svc_common+0x8c/0x220
 do_el0_svc+0x2c/0x90
 el0_svc+0x1c/0x30
 el0_sync_handler+0xa8/0xb0
 el0_sync+0x148/0x180
irq event stamp: 2082270

Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.

This problem exists in versions after stable 5.10.y.

Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com
Fixes: a2468cc9bfdff ("swap: choose swap device according to numa node")
Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com>
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix sysfs interface lifetime

The current nilfs2 sysfs support has issues with the timing of creation
and deletion of sysfs entries, potentially leading to null pointer
dereferences, use-after-free, and lockdep warnings.

Some of the sysfs attributes for nilfs2 per-filesystem instance refer to
metadata file "cpfile", "sufile", or "dat", but
nilfs_sysfs_create_device_group that creates those attributes is executed
before the inodes for these metadata files are loaded, and
nilfs_sysfs_delete_device_group which deletes these sysfs entries is
called after releasing their metadata file inodes.

Therefore, access to some of these sysfs attributes may occur outside of
the lifetime of these metadata files, resulting in inode NULL pointer
dereferences or use-after-free.

In addition, the call to nilfs_sysfs_create_device_group() is made during
the locking period of the semaphore "ns_sem" of nilfs object, so the
shrinker call caused by the memory allocation for the sysfs entries, may
derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in
nilfs_evict_inode()".

Since nilfs2 may acquire "ns_sem" deep in the call stack holding other
locks via its error handler __nilfs_error(), this causes lockdep to report
circular locking.  This is a false positive and no circular locking
actually occurs as no inodes exist yet when
nilfs_sysfs_create_device_group() is called.  Fortunately, the lockdep
warnings can be resolved by simply moving the call to
nilfs_sysfs_create_device_group() out of "ns_sem".

This fixes these sysfs issues by revising where the device's sysfs
interface is created/deleted and keeping its lifetime within the lifetime
of the metadata files above.

Link: https://lkml.kernel.org/r/20230330205515.6167-1-konishi.ryusuke@gmail.com
Fixes: dd70edbde262 ("nilfs2: integrate sysfs support into driver")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+979fa7f9c0d086fdc282@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000003414b505f7885f7e@google.com
Reported-by: syzbot+5b7d542076d9bddc3c6a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000006ac86605f5f44eb9@google.com
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: take a page reference when removing device exclusive entries

Device exclusive page table entries are used to prevent CPU access to a
page whilst it is being accessed from a device.  Typically this is used to
implement atomic operations when the underlying bus does not support
atomic access.  When a CPU thread encounters a device exclusive entry it
locks the page and restores the original entry after calling mmu notifiers
to signal drivers that exclusive access is no longer available.

The device exclusive entry holds a reference to the page making it safe to
access the struct page whilst the entry is present.  However the fault
handling code does not hold the PTL when taking the page lock.  This means
if there are multiple threads faulting concurrently on the device
exclusive entry one will remove the entry whilst others will wait on the
page lock without holding a reference.

This can lead to threads locking or waiting on a folio with a zero
refcount.  Whilst mmap_lock prevents the pages getting freed via munmap()
they may still be freed by a migration.  This leads to warnings such as
PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount
drops to zero.

Fix this by trying to take a reference on the folio before locking it.
The code already checks the PTE under the PTL and aborts if the entry is
no longer there.  It is also possible the folio has been unmapped, freed
and re-allocated allowing a reference to be taken on an unrelated folio.
This case is also detected by the PTE check and the folio is unlocked
without further changes.

Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com
Fixes: b756a3b5e7ea ("mm: device exclusive memory access")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmalloc: avoid warn_alloc noise caused by fatal signal

There're some suspicious warn_alloc on my test serer, for example,

[13366.518837] warn_alloc: 81 callbacks suppressed
[13366.518841] test_verifier: vmalloc error: size 4096, page order 0, failed to allocate pages, mode:0x500dc2(GFP_HIGHUSER|__GFP_ZERO|__GFP_ACCOUNT), nodemask=(null),cpuset=/,mems_allowed=0-1
[13366.522240] CPU: 30 PID: 722463 Comm: test_verifier Kdump: loaded Tainted: G        W  O       6.2.0+ #638
[13366.524216] Call Trace:
[13366.524702]  <TASK>
[13366.525148]  dump_stack_lvl+0x6c/0x80
[13366.525712]  dump_stack+0x10/0x20
[13366.526239]  warn_alloc+0x119/0x190
[13366.526783]  ? alloc_pages_bulk_array_mempolicy+0x9e/0x2a0
[13366.527470]  __vmalloc_area_node+0x546/0x5b0
[13366.528066]  __vmalloc_node_range+0xc2/0x210
[13366.528660]  __vmalloc_node+0x42/0x50
[13366.529186]  ? bpf_prog_realloc+0x53/0xc0
[13366.529743]  __vmalloc+0x1e/0x30
[13366.530235]  bpf_prog_realloc+0x53/0xc0
[13366.530771]  bpf_patch_insn_single+0x80/0x1b0
[13366.531351]  bpf_jit_blind_constants+0xe9/0x1c0
[13366.531932]  ? __free_pages+0xee/0x100
[13366.532457]  ? free_large_kmalloc+0x58/0xb0
[13366.533002]  bpf_int_jit_compile+0x8c/0x5e0
[13366.533546]  bpf_prog_select_runtime+0xb4/0x100
[13366.534108]  bpf_prog_load+0x6b1/0xa50
[13366.534610]  ? perf_event_task_tick+0x96/0xb0
[13366.535151]  ? security_capable+0x3a/0x60
[13366.535663]  __sys_bpf+0xb38/0x2190
[13366.536120]  ? kvm_clock_get_cycles+0x9/0x10
[13366.536643]  __x64_sys_bpf+0x1c/0x30
[13366.537094]  do_syscall_64+0x38/0x90
[13366.537554]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[13366.538107] RIP: 0033:0x7f78310f8e29
[13366.538561] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 17 e0 2c 00 f7 d8 64 89 01 48
[13366.540286] RSP: 002b:00007ffe2a61fff8 EFLAGS: 00000206 ORIG_RAX: 0000000000000141
[13366.541031] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f78310f8e29
[13366.541749] RDX: 0000000000000080 RSI: 00007ffe2a6200b0 RDI: 0000000000000005
[13366.542470] RBP: 00007ffe2a620010 R08: 00007ffe2a6202a0 R09: 00007ffe2a6200b0
[13366.543183] R10: 00000000000f423e R11: 0000000000000206 R12: 0000000000407800
[13366.543900] R13: 00007ffe2a620540 R14: 0000000000000000 R15: 0000000000000000
[13366.544623]  </TASK>
[13366.545260] Mem-Info:
[13366.546121] active_anon:81319 inactive_anon:20733 isolated_anon:0
 active_file:69450 inactive_file:5624 isolated_file:0
 unevictable:0 dirty:10 writeback:0
 slab_reclaimable:69649 slab_unreclaimable:48930
 mapped:27400 shmem:12868 pagetables:4929
 sec_pagetables:0 bounce:0
 kernel_misc_reclaimable:0
 free:15870308 free_pcp:142935 free_cma:0
[13366.551886] Node 0 active_anon:224836kB inactive_anon:33528kB active_file:175692kB inactive_file:13752kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:59248kB dirty:32kB writeback:0kB shmem:18252kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:4616kB pagetables:10664kB sec_pagetables:0kB all_unreclaimable? no
[13366.555184] Node 1 active_anon:100440kB inactive_anon:49404kB active_file:102108kB inactive_file:8744kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:50352kB dirty:8kB writeback:0kB shmem:33220kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB kernel_stack:3896kB pagetables:9052kB sec_pagetables:0kB all_unreclaimable? no
[13366.558262] Node 0 DMA free:15360kB boost:0kB min:304kB low:380kB high:456kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
[13366.560821] lowmem_reserve[]: 0 2735 31873 31873 31873
[13366.561981] Node 0 DMA32 free:2790904kB boost:0kB min:56028kB low:70032kB high:84036kB reserved_highatomic:0KB active_anon:1936kB inactive_anon:20kB active_file:396kB inactive_file:344kB unevictable:0kB writepending:0kB present:3129200kB managed:2801520kB mlocked:0kB bounce:0kB free_pcp:5188kB local_pcp:0kB free_cma:0kB
[13366.565148] lowmem_reserve[]: 0 0 29137 29137 29137
[13366.566168] Node 0 Normal free:28533824kB boost:0kB min:596740kB low:745924kB high:895108kB reserved_highatomic:28672KB active_anon:222900kB inactive_anon:33508kB active_file:175296kB inactive_file:13408kB unevictable:0kB writepending:32kB present:30408704kB managed:29837172kB mlocked:0kB bounce:0kB free_pcp:295724kB local_pcp:0kB free_cma:0kB
[13366.569485] lowmem_reserve[]: 0 0 0 0 0
[13366.570416] Node 1 Normal free:32141144kB boost:0kB min:660504kB low:825628kB high:990752kB reserved_highatomic:69632KB active_anon:100440kB inactive_anon:49404kB active_file:102108kB inactive_file:8744kB unevictable:0kB writepending:8kB present:33554432kB managed:33025372kB mlocked:0kB bounce:0kB free_pcp:270880kB local_pcp:46860kB free_cma:0kB
[13366.573403] lowmem_reserve[]: 0 0 0 0 0
[13366.574015] Node 0 DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 1*1024kB (U) 1*2048kB (M) 3*4096kB (M) = 15360kB
[13366.575474] Node 0 DMA32: 782*4kB (UME) 756*8kB (UME) 736*16kB (UME) 745*32kB (UME) 694*64kB (UME) 653*128kB (UME) 595*256kB (UME) 552*512kB (UME) 454*1024kB (UME) 347*2048kB (UME) 246*4096kB (UME) = 2790904kB
[13366.577442] Node 0 Normal: 33856*4kB (UMEH) 51815*8kB (UMEH) 42418*16kB (UMEH) 36272*32kB (UMEH) 22195*64kB (UMEH) 10296*128kB (UMEH) 7238*256kB (UMEH) 5638*512kB (UEH) 5337*1024kB (UMEH) 3506*2048kB (UMEH) 1470*4096kB (UME) = 28533784kB
[13366.580460] Node 1 Normal: 15776*4kB (UMEH) 37485*8kB (UMEH) 29509*16kB (UMEH) 21420*32kB (UMEH) 14818*64kB (UMEH) 13051*128kB (UMEH) 9918*256kB (UMEH) 7374*512kB (UMEH) 5397*1024kB (UMEH) 3887*2048kB (UMEH) 2002*4096kB (UME) = 32141240kB
[13366.583027] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[13366.584380] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[13366.585702] Node 1 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
[13366.587042] Node 1 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
[13366.588372] 87386 total pagecache pages
[13366.589266] 0 pages in swap cache
[13366.590327] Free swap  = 0kB
[13366.591227] Total swap = 0kB
[13366.592142] 16777082 pages RAM
[13366.593057] 0 pages HighMem/MovableOnly
[13366.594037] 357226 pages reserved
[13366.594979] 0 pages hwpoisoned

This failure really confuse me as there're still lots of available pages.
Finally I figured out it was caused by a fatal signal.  When a process is
allocating memory via vm_area_alloc_pages(), it will break directly even
if it hasn't allocated the requested pages when it receives a fatal
signal.  In that case, we shouldn't show this warn_alloc, as it is
useless.  We only need to show this warning when there're really no enough
pages.

Link: https://lkml.kernel.org/r/20230330162625.13604-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field

nilfs_btree_assign_p() and nilfs_direct_assign_p() are not initializing
"struct nilfs_binfo_dat"->bi_pad field, causing uninit-value reports when
being passed to CRC function.

Link: https://lkml.kernel.org/r/20230326152146.15872-1-konishi.ryusuke@gmail.com
Reported-by: syzbot <syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lkml.kernel.org/r/CANX2M5bVbzRi6zH3PTcNE_31TzerstOXUa9Bay4E6y6dX23_pg@mail.gmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()

The finalization of nilfs_segctor_thread() can race with
nilfs_segctor_kill_thread() which terminates that thread, potentially
causing a use-after-free BUG as KASAN detected.

At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member
of "struct nilfs_sc_info" to indicate the thread has finished, and then
notifies nilfs_segctor_kill_thread() of this using waitqueue
"sc_wait_task" on the struct nilfs_sc_info.

However, here, immediately after the NULL assignment to "sc_task", it is
possible that nilfs_segctor_kill_thread() will detect it and return to
continue the deallocation, freeing the nilfs_sc_info structure before the
thread does the notification.

This fixes the issue by protecting the NULL assignment to "sc_task" and
its notification, with spinlock "sc_state_lock" of the struct
nilfs_sc_info.  Since nilfs_segctor_kill_thread() does a final check to
see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate
the race.

Link: https://lkml.kernel.org/r/20230327175318.8060-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+b08ebcc22f8f3e6be43a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/00000000000000660d05f7dfa877@google.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc: document freeable stats

When freeable class stat was added to classes file (back in 2016) we
forgot to update zsmalloc documentation.  Fix that.

Link: https://lkml.kernel.org/r/20230325024631.2817153-3-senozhatsky@chromium.org
Fixes: 1120ed548394 ("mm/zsmalloc: add `freeable' column to pool stat")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc: document new fullness grouping

Patch series "zsmalloc: minor documentation updates".

Two minor patches that bring zsmalloc documentation up to date.

This patch (of 2):

Update documentation and reflect new zspages fullness grouping (we don't
use almost_empty and almost_full anymore).

Link: https://lkml.kernel.org/r/20230325024631.2817153-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20230325024631.2817153-2-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Fixes: 67e157eb3639 ("zsmalloc: show per fullness group class stats")
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fsdax: force clear dirty mark if CoW

XFS allows CoW on non-shared extents to combat fragmentation[1].  The old
non-shared extent could be mwrited before, its dax entry is marked dirty.

This results in a WARNing:

[   28.512349] ------------[ cut here ]------------
[   28.512622] WARNING: CPU: 2 PID: 5255 at fs/dax.c:390 dax_insert_entry+0x342/0x390
[   28.513050] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache netfs nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables
[   28.515462] CPU: 2 PID: 5255 Comm: fsstress Kdump: loaded Not tainted 6.3.0-rc1-00001-g85e1481e19c1-dirty #117
[   28.515902] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.1-1-1 04/01/2014
[   28.516307] RIP: 0010:dax_insert_entry+0x342/0x390
[   28.516536] Code: 30 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 45 20 48 83 c0 01 e9 e2 fe ff ff 48 8b 45 20 48 83 c0 01 e9 cd fe ff ff <0f> 0b e9 53 ff ff ff 48 8b 7c 24 08 31 f6 e8 1b 61 a1 00 eb 8c 48
[   28.517417] RSP: 0000:ffffc9000845fb18 EFLAGS: 00010086
[   28.517721] RAX: 0000000000000053 RBX: 0000000000000155 RCX: 000000000018824b
[   28.518113] RDX: 0000000000000000 RSI: ffffffff827525a6 RDI: 00000000ffffffff
[   28.518515] RBP: ffffea00062092c0 R08: 0000000000000000 R09: ffffc9000845f9c8
[   28.518905] R10: 0000000000000003 R11: ffffffff82ddb7e8 R12: 0000000000000155
[   28.519301] R13: 0000000000000000 R14: 000000000018824b R15: ffff88810cfa76b8
[   28.519703] FS:  00007f14a0c94740(0000) GS:ffff88817bd00000(0000) knlGS:0000000000000000
[   28.520148] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   28.520472] CR2: 00007f14a0c8d000 CR3: 000000010321c004 CR4: 0000000000770ee0
[   28.520863] PKRU: 55555554
[   28.521043] Call Trace:
[   28.521219]  <TASK>
[   28.521368]  dax_fault_iter+0x196/0x390
[   28.521595]  dax_iomap_pte_fault+0x19b/0x3d0
[   28.521852]  __xfs_filemap_fault+0x234/0x2b0
[   28.522116]  __do_fault+0x30/0x130
[   28.522334]  do_fault+0x193/0x340
[   28.522586]  __handle_mm_fault+0x2d3/0x690
[   28.522975]  handle_mm_fault+0xe6/0x2c0
[   28.523259]  do_user_addr_fault+0x1bc/0x6f0
[   28.523521]  exc_page_fault+0x60/0x140
[   28.523763]  asm_exc_page_fault+0x22/0x30
[   28.524001] RIP: 0033:0x7f14a0b589ca
[   28.524225] Code: c5 fe 7f 07 c5 fe 7f 47 20 c5 fe 7f 47 40 c5 fe 7f 47 60 c5 f8 77 c3 66 0f 1f 84 00 00 00 00 00 40 0f b6 c6 48 89 d1 48 89 fa <f3> aa 48 89 d0 c5 f8 77 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90
[   28.525198] RSP: 002b:00007fff1dea1c98 EFLAGS: 00010202
[   28.525505] RAX: 000000000000001e RBX: 000000000014a000 RCX: 0000000000006046
[   28.525895] RDX: 00007f14a0c82000 RSI: 000000000000001e RDI: 00007f14a0c8d000
[   28.526290] RBP: 000000000000006f R08: 0000000000000004 R09: 000000000014a000
[   28.526681] R10: 0000000000000008 R11: 0000000000000246 R12: 028f5c28f5c28f5c
[   28.527067] R13: 8f5c28f5c28f5c29 R14: 0000000000011046 R15: 00007f14a0c946c0
[   28.527449]  </TASK>
[   28.527600] ---[ end trace 0000000000000000 ]---

To be able to delete this entry, clear its dirty mark before
invalidate_inode_pages2_range().

[1] https://lore.kernel.org/linux-xfs/20230321151339.GA11376@frogsfrogsfrogs/

Link: https://lkml.kernel.org/r/1679653680-2-1-git-send-email-ruansy.fnst@fujitsu.com
Fixes: f80e1668888f3 ("fsdax: invalidate pages when CoW")
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: fix uffd wr-protection for CoW optimization path

This patch fixes an issue that a hugetlb uffd-wr-protected mapping can be
writable even with uffd-wp bit set.  It only happens with hugetlb private
mappings, when someone firstly wr-protects a missing pte (which will
install a pte marker), then a write to the same page without any prior
access to the page.

Userfaultfd-wp trap for hugetlb was implemented in hugetlb_fault() before
reaching hugetlb_wp() to avoid taking more locks that userfault won't
need.  However there's one CoW optimization path that can trigger
hugetlb_wp() inside hugetlb_no_page(), which will bypass the trap.

This patch skips hugetlb_wp() for CoW and retries the fault if uffd-wp bit
is detected.  The new path will only trigger in the CoW optimization path
because generic hugetlb_fault() (e.g.  when a present pte was
wr-protected) will resolve the uffd-wp bit already.  Also make sure
anonymous UNSHARE won't be affected and can still be resolved, IOW only
skip CoW not CoR.

This patch will be needed for v5.19+ hence copy stable.

[peterx@redhat.com: v2]
Link: https://lkml.kernel.org/r/ZBzOqwF2wrHgBVZb@x1n
[peterx@redhat.com: v3]
Link: https://lkml.kernel.org/r/20230324142620.2344140-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230321191840.1897940-1-peterx@redhat.com
Fixes: 166f3ecc0daf ("mm/hugetlb: hook page faults for uffd write protection")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: enable maple tree RCU mode by default

Use the maple tree in RCU mode for VMA tracking.

The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock.  This is safe as the
writes to the stack have a guard VMA which ensures there will always be a
NULL in the direction of the growth and thus will only update a pivot.

It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs.  syzbot has constructed a testcase which sets up a VMA
to grow and consume the empty space.  Overwriting the entire NULL entry
causes the tree to be altered in a way that is not safe for concurrent
readers; the readers may see a node being rewritten or one that does not
match the maple state they are using.

Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.

[Liam.Howlett@Oracle.com: we don't need to free the nodes with RCU[
Link: https://lore.kernel.org/linux-mm/000000000000b0a65805f663ace6@google.com/
Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: add RCU lock checking to rcu callback functions

Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain.  Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.

Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree.  Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking.  It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.

Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: add smp_rmb() to dead node detection

Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.

The is necessary for RCU mode.

Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: fix write memory barrier of nodes once dead for RCU mode

During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes.  To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.

There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead.  Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.

Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.

This is necessary for the RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: remove extra smp_wmb() from mas_dead_leaves()

The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed.  This is an optimization for the RCU mode
of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: fix freeing of nodes in rcu mode

The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types.  This is necessary for the
RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: detect dead nodes in mas_start()

When initially starting a search, the root node may already be in the
process of being replaced in RCU mode.  Detect and restart the walk if
this is the case.  This is necessary for RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: be more cautious about dead nodes

Patch series "Fix VMA tree modification under mmap read lock".

Syzbot reported a BUG_ON in mm/mmap.c which was found to be caused by an
inconsistency between threads walking the VMA maple tree.  The
inconsistency is caused by the page fault handler modifying the maple tree
while holding the mmap_lock for read.

This only happens for stack VMAs.  We had thought this was safe as it only
modifies a single pivot in the tree.  Unfortunately, syzbot constructed a
test case where the stack had no guard page and grew the stack to abut the
next VMA.  This causes us to delete the NULL entry between the two VMAs
and rewrite the node.

We considered several options for fixing this, including dropping the
mmap_lock, then reacquiring it for write; and relaxing the definition of
the tree to permit a zero-length NULL entry in the node.  We decided the
best option was to backport some of the RCU patches from -next, which
solve the problem by allocating a new node and RCU-freeing the old node.
Since the problem exists in 6.1, we preferred a solution which is similar
to the one we intended to merge next merge window.

These patches have been in -next since next-20230301, and have received
intensive testing in Android as part of the RCU page fault patchset.  They
were also sent as part of the "Per-VMA locks" v4 patch series.  Patches 1
to 7 are bug fixes for RCU mode of the tree and patch 8 enables RCU mode
for the tree.

Performance v6.3-rc3 vs patched v6.3-rc3: Running these changes through
mmtests showed there was a 15-20% performance decrease in
will-it-scale/brk1-processes.  This tests creating and inserting a single
VMA repeatedly through the brk interface and isn't representative of any
real world applications.

This patch (of 8):

ma_pivots() and ma_data_end() may be called with a dead node.  Ensure to
that the node isn't dead before using the returned values.

This is necessary for RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230327185532.2354250-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Li <chriscli@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: freak07 <michalechner92@googlemail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>