octeontx2-pf: Add flow classification using IP next level protocol
This patch adds support to install flow rules using ipv4 proto or
ipv6 next header field to distinguish between tcp/udp/sctp/esp/ah
flows when user doesn't specify the other match creteria related to
the flow such as tcp/udp/sctp source port and destination port, ah/esp
spi value. This is achieved by matching the layer type extracted by
NPC HW into the search key. Modified the driver to use Ethertype as
match criteria when user doesn't specify source IP address and dest
IP address. The esp/ah flow rule matching using security parameter
index (spi) is not supported as of now since the field is not extracted
into MCAM search key. Modified npc_check_field function to return bool.
Ian Rogers [Wed, 13 Jan 2021 22:36:08 +0000 (14:36 -0800)]
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
Add inline to __always_inline making it match the linux/compiler.h.
Adding this avoids an unused function warning on bpf_tail_call_static
when compining with -Wall.
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
During an out-of-tree build, attempting to install the $(TEST_FILES)
into the $(OUTPUT) directory fails, because the objects were already
generated into $(OUTPUT):
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_lwt_ip_encap.o" failed: No such file or directory (2)
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_tc_edt.o" failed: No such file or directory (2)
Build bpftool and resolve_btfids using the host toolchain when
cross-compiling, since they are executed during build to generate the
selftests. Add a host build directory in order to build both host and
target version of libbpf. Build host tools using $(HOSTCC) defined in
Makefile.include.
Seb Laveze [Tue, 12 Jan 2021 14:01:22 +0000 (15:01 +0100)]
net: stmmac: use __napi_schedule() for PREEMPT_RT
Use of __napi_schedule_irqoff() is not safe with PREEMPT_RT in which
hard interrupts are not disabled while running the threaded interrupt.
Using __napi_schedule() works for both PREEMPT_RT and mainline Linux,
just at the cost of an additional check if interrupts are disabled for
mainline (since they are already disabled).
Similar to the fix done for enetc commit 215602a8d212 ("enetc: use
napi_schedule to be compatible with PREEMPT_RT")
Tariq Toukan [Tue, 12 Jan 2021 07:05:33 +0000 (23:05 -0800)]
net/mlx5e: IPsec, Inline feature_check fast-path function
Feature check functions are in the TX fast-path of all SKBs, not only
IPsec traffic.
Move the IPsec feature check function into a header and turn it inline.
Use a stub and clean the config flag condition in Eth main driver file.
Tariq Toukan [Tue, 12 Jan 2021 07:05:31 +0000 (23:05 -0800)]
net/mlx5e: IPsec, Enclose csum logic under ipsec config
All IPsec logic should be wrapped under the compile flag,
including its checksum logic.
Introduce an inline function in ipsec datapath header,
with a corresponding stub.
Roi Dayan [Tue, 12 Jan 2021 07:05:30 +0000 (23:05 -0800)]
net/mlx5e: CT: Remove redundant usage of zone mask
The zone member is of type u16 so there is no reason to apply
the zone mask on it. This is also matching the call to set a
match in other places which don't need and don't apply the mask.
Jianbo Liu [Tue, 12 Jan 2021 07:05:27 +0000 (23:05 -0800)]
net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported
Miss path handling of tc multi chain filters (i.e. filters that are
defined on chain > 0) requires the hardware to communicate to the
driver the last chain that was processed. This is possible only when
the hardware is capable of performing the combination of modify header
and forward to table actions. Currently, if the hardware is missing
this capability then the driver only offloads rules that are defined
on tc chain 0 prio 1. However, this restriction can be relaxed because
packets that miss from chain 0 are processed through all the
priorities by tc software.
Allow the offload of all the supported priorities for chain 0 even
when the hardware is not capable to perform modify header and goto
table actions.
Eli Cohen [Tue, 12 Jan 2021 07:05:26 +0000 (23:05 -0800)]
net/mlx5: E-Switch, use new cap as condition for mpls over udp
Use tunnel_stateless_mpls_over_udp instead of
MLX5_FLEX_PROTO_CW_MPLS_UDP since new devices have native support for
mpls over udp and do not rely on flex parser.
Eli Cohen [Tue, 12 Jan 2021 07:05:25 +0000 (23:05 -0800)]
net/mlx5e: Simplify condition on esw_vport_enable_qos()
esw->qos.enabled will only be true if both MLX5_CAP_GEN(dev, qos) and
MLX5_CAP_QOS(dev, esw_scheduling) are true. Therefore, remove them from
the condition in and rely only on esw->qos.enabled.
If alloc_canfd_skb() returns NULL, 'cfg' is an uninitialized variable, so we
should check 'skb' rather than 'cfd' after calling alloc_canfd_skb(priv->ndev,
&cfd).
Linus Torvalds [Wed, 13 Jan 2021 19:55:14 +0000 (11:55 -0800)]
Merge tag 'sound-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are some piled fixes, hopefully the last big one for 5.11.
All changes are device-specific small fixes, and majority of commits
are for ASoC while USB-audio got a bit large changes for addressing
the regression for devices with quirks"
* tag 'sound-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
ALSA: hda/hdmi - enable runtime pm for CI AMD display audio
ALSA: firewire-tascam: Fix integer overflow in midi_port_work()
ALSA: fireface: Fix integer overflow in transmit_midi_msg()
ALSA: hda/tegra: fix tegra-hda on tegra30 soc
clk: tegra30: Add hda clock default rates to clock driver
ALSA: doc: Fix reference to mixart.rst
ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices
ALSA: usb-audio: Annotate the endpoint index in audioformat
ALSA: usb-audio: Avoid unnecessary interface re-setup
ALSA: usb-audio: Choose audioformat of a counter-part substream
ALSA: usb-audio: Fix the missing endpoints creations for quirks
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machines
ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad X395
ASoC: amd: Replacing MSI with Legacy IRQ model
ASoC: AMD Renoir - add DMI entry for Lenovo ThinkPad E14 Gen 2
ASoC: meson: axg-tdm-interface: fix loopback
ASoC: meson: axg-tdmin: fix axg skew offset
ASoC: max98373: don't access volatile registers in bias level off
ASoC: rt711: mutex between calibration and power state changes
ASoC: Intel: haswell: Add missing pm_ops
...
Baptiste Lepers [Tue, 12 Jan 2021 15:59:15 +0000 (15:59 +0000)]
rxrpc: Call state should be read with READ_ONCE() under some circumstances
The call state may be changed at any time by the data-ready routine in
response to received packets, so if the call state is to be read and acted
upon several times in a function, READ_ONCE() must be used unless the call
state lock is held.
As it happens, we used READ_ONCE() to read the state a few lines above the
unmarked read in rxrpc_input_data(), so use that value rather than
re-reading it.
David Howells [Tue, 12 Jan 2021 15:23:51 +0000 (15:23 +0000)]
rxrpc: Fix handling of an unsupported token type in rxrpc_read()
Clang static analysis reports the following:
net/rxrpc/key.c:657:11: warning: Assigned value is garbage or undefined
toksize = toksizes[tok++];
^ ~~~~~~~~~~~~~~~
rxrpc_read() contains two consecutive loops. The first loop calculates the
token sizes and stores the results in toksizes[] and the second one uses
the array. When there is an error in identifying the token in the first
loop, the token is skipped, no change is made to the toksizes[] array.
When the same error happens in the second loop, the token is not skipped.
This will cause the toksizes[] array to be out of step and will overrun
past the calculated sizes.
Fix this by making both loops log a message and return an error in this
case. This should only happen if a new token type is incompletely
implemented, so it should normally be impossible to trigger this.
Lukas Bulwahn [Fri, 8 Jan 2021 07:39:32 +0000 (08:39 +0100)]
MAINTAINERS: adjust entry to tcan4x5x file split
Commit 7813887ea972 ("can: tcan4x5x: rename tcan4x5x.c -> tcan4x5x-core.c") and
commit 67def4ef8bb9 ("can: tcan4x5x: move regmap code into seperate file")
split the file tcan4x5x.c into two files, but missed to adjust the TI TCAN4X5X
DEVICE DRIVER section in MAINTAINERS.
====================
net/smc: fix out of bound access in netlink interface
Both patches fix possible out-of-bounds reads. The original code expected
that snprintf() reads len-1 bytes from source and appends the terminating
null, but actually snprintf() first copies len bytes and finally overwrites
the last byte with a null.
Fix this by using memcpy() and terminating the string afterwards.
====================
Guvenc Gulce [Tue, 12 Jan 2021 16:21:22 +0000 (17:21 +0100)]
net/smc: use memcpy instead of snprintf to avoid out of bounds read
Using snprintf() to convert not null-terminated strings to null
terminated strings may cause out of bounds read in the source string.
Therefore use memcpy() and terminate the target string with a null
afterwards.
Fixes: a3db10efcc4c ("net/smc: Add support for obtaining SMCR device list") Signed-off-by: Guvenc Gulce <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Alex Elder [Tue, 12 Jan 2021 19:21:34 +0000 (13:21 -0600)]
net: ipa: add config dependency on QCOM_SMEM
The IPA driver depends on some SMEM functionality (qcom_smem_init(),
qcom_smem_alloc(), and qcom_smem_virt_to_phys()), but this is not
reflected in the configuration dependencies. Add a dependency on
QCOM_SMEM to avoid attempts to build the IPA driver without SMEM.
This avoids a link error for certain configurations.
Paolo Abeni [Tue, 12 Jan 2021 17:25:24 +0000 (18:25 +0100)]
mptcp: better msk-level shutdown.
Instead of re-implementing most of inet_shutdown, re-use
such helper, and implement the MPTCP-specific bits at the
'proto' level.
The msk-level disconnect() can now be invoked, lets provide a
suitable implementation.
As a side effect, this fixes bad state management for listener
sockets. The latter could lead to division by 0 oops since
commit ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling").
Fixes: 43b54c6ee382 ("mptcp: Use full MPTCP-level disconnect state machine") Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Jakub Kicinski [Wed, 13 Jan 2021 04:05:37 +0000 (20:05 -0800)]
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
This series has 2 fixes. The first one fixes a resource accounting error
with the RDMA driver loaded and the second one fixes the firmware
flashing sequence after defragmentation.
====================
Pavan Chebbi [Mon, 11 Jan 2021 09:26:40 +0000 (04:26 -0500)]
bnxt_en: Clear DEFRAG flag in firmware message when retry flashing.
When the FW tells the driver to retry the INSTALL_UPDATE command after
it has cleared the NVM area, the driver is not clearing the previously
used ALLOWED_TO_DEFRAG flag. As a result the FW tries to defrag the NVM
area a second time in a loop and can fail the request.
Fixes: 1432c3f6a6ca ("bnxt_en: Retry installing FW package under NO_SPACE error condition.") Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Michael Chan [Mon, 11 Jan 2021 09:26:39 +0000 (04:26 -0500)]
bnxt_en: Improve stats context resource accounting with RDMA driver loaded.
The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts
used by the RDMA driver correctly when the RDMA driver is freeing the
MSIX vectors. It assumes that if the RDMA driver is registered, the
additional stats contexts will be needed. This is not true when the
RDMA driver is about to unregister and frees the MSIX vectors.
This slight error leads to over accouting of the stats contexts needed
after the RDMA driver has unloaded. This will cause some firmware
warning and error messages in dmesg during subsequent config. changes
or ifdown/ifup.
Fix it by properly accouting for extra stats contexts only if the
RDMA driver is registered and MSIX vectors have been successfully
requested.
Russell King [Sun, 10 Jan 2021 10:59:38 +0000 (10:59 +0000)]
net: sfp: add debugfs support
Add debugfs support to SFP so that the internal state of the SFP state
machines and hardware signal state can be viewed from userspace, rather
than having to compile a debug kernel to view state transitions in the
kernel log. The 'state' output looks like:
Leon Schuermann [Mon, 11 Jan 2021 19:03:15 +0000 (20:03 +0100)]
r8153_ecm: Add Lenovo Powered USB-C Hub as a fallback of r8152
This commit enables the use of the r8153_ecm driver, introduced with
commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for
RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the
Realtek RTL8153B chip.
This results in the following driver preference:
- if r8152 is available, use the r8152 driver
- if r8152 is not available, use the r8153_ecm driver
This is done to prevent the NIC from constantly sending pause frames
when the host system enters standby (fixed by using the r8152 driver
in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing
the device to work with the r8153_ecm driver as a fallback.
Leon Schuermann [Mon, 11 Jan 2021 19:03:13 +0000 (20:03 +0100)]
r8152: Add Lenovo Powered USB-C Travel Hub
This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to
use the cdc_ether driver. However, using this driver, with the system
suspended the device constantly sends pause-frames as soon as the
receive buffer fills up. This causes issues with other devices, where
some Ethernet switches stop forwarding packets altogether.
Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.
Long Li [Sat, 9 Jan 2021 00:53:43 +0000 (16:53 -0800)]
hv_netvsc: Process NETDEV_GOING_DOWN on VF hot remove
On VF hot remove, NETDEV_GOING_DOWN is sent to notify the VF is about to
go down. At this time, the VF is still sending/receiving traffic and we
request the VSP to switch datapath.
On completion, the datapath is switched to synthetic and we can proceed
with VF hot remove.
Long Li [Sat, 9 Jan 2021 00:53:42 +0000 (16:53 -0800)]
hv_netvsc: Wait for completion on request SWITCH_DATA_PATH
The completion indicates if NVSP_MSG4_TYPE_SWITCH_DATA_PATH has been
processed by the VSP. The traffic is steered to VF or synthetic after we
receive this completion.
Heiner Kallweit [Tue, 12 Jan 2021 08:31:20 +0000 (09:31 +0100)]
r8169: improve DASH support
Instead of doing the full DASH check each time r8168_check_dash() is
called, let's do it once in probe and store DASH capabilities in a
new rtl8169_private member.
Heiner Kallweit [Tue, 12 Jan 2021 08:28:41 +0000 (09:28 +0100)]
r8169: align rtl_wol_suspend_quirk with vendor driver and rename it
At least from chip version 25 the vendor driver sets these rx flags
for all chip versions if WOL is enabled. Therefore I wouldn't consider
it a quirk, so let's rename the function.
What happens is that devlink_port_unregister emits a netlink
DEVLINK_CMD_PORT_DEL message which associates the devlink port that is
getting unregistered with the ifindex of its corresponding net_device.
Only trouble is, the net_device has already been unregistered.
It looks like we can stub out the search for a corresponding net_device
if we clear the devlink_port's type. This looks like a bit of a hack,
but also seems to be the reason why the devlink_port_type_clear function
exists in the first place.
/* Notifier chain MUST detach us all upper devices. */
WARN_ON(netdev_has_any_upper_dev(dev));
Other stacked interfaces, like VLAN, do indeed listen for
NETDEV_UNREGISTER on the real_dev and also unregister themselves at that
time, which is clearly the behavior that rollback_registered_many
expects. But DSA interfaces are not VLAN. They have backing hardware
(platform devices, PCI devices, MDIO, SPI etc) which have a life cycle
of their own and we can't just trigger an unregister from the DSA
framework when we receive a netdev notifier that the master unregisters.
Luckily, there is something we can do, and that is to inform the driver
core that we have a runtime dependency to the DSA master interface's
device, and create a device link where that is the supplier and we are
the consumer. Having this device link will make the DSA switch unbind
before the DSA master unbinds, which is enough to avoid the WARN_ON from
rollback_registered_many.
Note that even before the blamed commit, DSA did nothing intelligent
when the master interface got unregistered either. See the discussion
here:
https://lore.kernel.org/netdev/20200505210253[email protected]/
But this time, at least the WARN_ON is loud enough that the
upper_dev_link commit can be blamed.
The advantage with this approach vs dev_hold(master) in the attached
link is that the latter is not meant for long term reference counting.
With dev_hold, the only thing that will happen is that when the user
attempts an unbind of the DSA master, netdev_wait_allrefs will keep
waiting and waiting, due to DSA keeping the refcount forever. DSA would
not access freed memory corresponding to the master interface, but the
unbind would still result in a freeze. Whereas with device links,
graceful teardown is ensured. It even works with cascaded DSA trees.
$ echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
[ 1818.797546] device swp0 left promiscuous mode
[ 1819.301112] sja1105 spi2.0: Link is Down
[ 1819.307981] DSA: tree 1 torn down
[ 1819.312408] device eno2 left promiscuous mode
[ 1819.656803] mscc_felix 0000:00:00.5: Link is Down
[ 1819.667194] DSA: tree 0 torn down
[ 1819.711557] fsl_enetc 0000:00:00.2 eno2: Link is Down
This approach allows us to keep the DSA framework absolutely unchanged,
and the driver core will just know to unbind us first when the master
goes away - as opposed to the large (and probably impossible) rework
required if attempting to listen for NETDEV_UNREGISTER.
As per the documentation at Documentation/driver-api/device_link.rst,
specifying the DL_FLAG_AUTOREMOVE_CONSUMER flag causes the device link
to be automatically purged when the consumer fails to probe or later
unbinds. So we don't need to keep the consumer_link variable in struct
dsa_switch.
Marek Vasut [Mon, 11 Jan 2021 12:50:46 +0000 (13:50 +0100)]
net: ks8851: Select PHYLIB and MICREL_PHY in Kconfig
The PHYLIB must be selected to provide mdiobus_*() functions, and the
MICREL_PHY is necessary too, as that is the only possible PHY attached
to the KS8851 (it is the internal PHY).
Marco Felsch [Mon, 11 Jan 2021 08:59:32 +0000 (09:59 +0100)]
net: phy: smsc: fix clk error handling
Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in
support") added the phy clk support. The commit already checks if
clk_get_optional() throw an error but instead of returning the error it
ignores it.
Add support for using kernel module global variables (__ksym externs in BPF
program). BPF verifier will now support ldimm64 with src_reg=BPF_PSEUDO_BTF_ID
and non-zero insn[1].imm field, specifying module BTF's FD. In such case,
module BTF object, similarly to BPF maps referenced from ldimm64 with
src_reg=BPF_PSEUDO_MAP_FD, will be recorded in bpf_progran's auxiliary data
and refcnt will be increased for both BTF object itself and its kernel module.
This makes sure kernel module won't be unloaded from under active attached BPF
program. These refcounts will be dropped when BPF program is unloaded.
New selftest validates all this is working as intended. bpf_testmod.ko is
extended with per-CPU variable. Selftests expects the latest pahole changes
(soon to be released as v1.20) to generate per-CPU variable BTF info for
kernel module.
v2->v3:
- added comments, addressed feedack (Yonghong, Hao);
v1->v2:
- fixed few compiler warnings, posted as separate pre-patches;
rfc->v1:
- use sys_membarrier(MEMBARRIER_CMD_GLOBAL) (Alexei).
Andrii Nakryiko [Tue, 12 Jan 2021 07:55:19 +0000 (23:55 -0800)]
libbpf: Support kernel module ksym externs
Add support for searching for ksym externs not just in vmlinux BTF, but across
all module BTFs, similarly to how it's done for CO-RE relocations. Kernels
that expose module BTFs through sysfs are assumed to support new ldimm64
instruction extension with BTF FD provided in insn[1].imm field, so no extra
feature detection is performed.
Andrii Nakryiko [Tue, 12 Jan 2021 07:55:18 +0000 (23:55 -0800)]
bpf: Support BPF ksym variables in kernel modules
Add support for directly accessing kernel module variables from BPF programs
using special ldimm64 instructions. This functionality builds upon vmlinux
ksym support, but extends ldimm64 with src_reg=BPF_PSEUDO_BTF_ID to allow
specifying kernel module BTF's FD in insn[1].imm field.
During BPF program load time, verifier will resolve FD to BTF object and will
take reference on BTF object itself and, for module BTFs, corresponding module
as well, to make sure it won't be unloaded from under running BPF program. The
mechanism used is similar to how bpf_prog keeps track of used bpf_maps.
One interesting change is also in how per-CPU variable is determined. The
logic is to find .data..percpu data section in provided BTF, but both vmlinux
and module each have their own .data..percpu entries in BTF. So for module's
case, the search for DATASEC record needs to look at only module's added BTF
types. This is implemented with custom search function.
Andrii Nakryiko [Tue, 12 Jan 2021 07:55:17 +0000 (23:55 -0800)]
selftests/bpf: Sync RCU before unloading bpf_testmod
If some of the subtests use module BTFs through ksyms, they will cause
bpf_prog to take a refcount on bpf_testmod module, which will prevent it from
successfully unloading. Module's refcnt is decremented when bpf_prog is freed,
which generally happens in RCU callback. So we need to trigger
syncronize_rcu() in the kernel, which can be achieved nicely with
membarrier(MEMBARRIER_CMD_SHARED) or membarrier(MEMBARRIER_CMD_GLOBAL) syscall.
So do that in kernel_sync_rcu() and make it available to other test inside the
test_progs. This synchronize_rcu() is called before attempting to unload
bpf_testmod.
In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB
handler"), Linux started rejecting RTM_GETDCB netlink messages if they
contained a set-like DCB_CMD_ command.
The reason was that privileges were only verified for RTM_SETDCB messages,
but the value that determined the action to be taken is the command, not
the message type. And validation of message type against the DCB command
was the obvious missing piece.
Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool
for configuration of DCB, accesses the DCB set-like APIs through
RTM_GETDCB.
Therefore do not bounce the discrepancy between message type and command.
Instead, in addition to validating privileges based on the actual message
type, validate them also based on the expected message type. This closes
the loophole of allowing DCB configuration on non-admin accounts, while
maintaining backward compatibility.
__bpf_free_used_maps() is always defined in kernel/bpf/core.c, while
include/linux/bpf.h is guarding it behind CONFIG_BPF_SYSCALL. Move it out of
that guard region and fix compiler warning.
Andrii Nakryiko [Tue, 12 Jan 2021 07:55:15 +0000 (23:55 -0800)]
bpf: Avoid warning when re-casting __bpf_call_base into __bpf_call_base_args
BPF interpreter uses extra input argument, so re-casts __bpf_call_base into
__bpf_call_base_args. Avoid compiler warning about incompatible function
prototypes by casting to void * first.
Andrii Nakryiko [Tue, 12 Jan 2021 07:55:14 +0000 (23:55 -0800)]
bpf: Add bpf_patch_call_args prototype to include/linux/bpf.h
Add bpf_patch_call_args() prototype. This function is called from BPF verifier
and only if CONFIG_BPF_JIT_ALWAYS_ON is not defined. This fixes compiler
warning about missing prototype in some kernel configurations.
Daniel Borkmann [Mon, 11 Jan 2021 23:09:39 +0000 (00:09 +0100)]
bpf: Allow to retrieve sol_socket opts from sock_addr progs
The _bpf_setsockopt() is able to set some of the SOL_SOCKET level options,
however, _bpf_getsockopt() has little support to actually retrieve them.
This small patch adds few misc options such as SO_MARK, SO_PRIORITY and
SO_BINDTOIFINDEX. For the latter getter and setter are added. The mark and
priority in particular allow to retrieve the options from BPF cgroup hooks
to then implement custom behavior / settings on the syscall hooks compared
to other sockets that stick to the defaults, for example.
Brendan Jackman [Tue, 12 Jan 2021 12:34:22 +0000 (12:34 +0000)]
bpf: Clarify return value of probe str helpers
When the buffer is too small to contain the input string, these helpers
return the length of the buffer, not the length of the original string.
This tries to make the docs totally clear about that, since "the length
of the [copied ]string" could also refer to the length of the input.
Linus Torvalds [Tue, 12 Jan 2021 17:38:53 +0000 (09:38 -0800)]
Merge tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
- Fix parsing of link-local IPv6 addresses
- Fix confusing logging of mount errors that was introduced by the
fsopen() patchset.
- Fix a tracing use after free in _nfs4_do_setlk()
- Layout return-on-close fixes when called from nfs4_evict_inode()
- Layout segments were being leaked in
pnfs_generic_clear_request_commit()
- Don't leak DS commits in pnfs_generic_retry_commit()
- Fix an Oopsable use-after-free when nfs_delegation_find_inode_server()
calls iput() on an inode after the super block has gone away"
* tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: nfs_igrab_and_active must first reference the superblock
NFS: nfs_delegation_find_inode_server must first reference the superblock
NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter
NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit()
NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the request
pNFS: Stricter ordering of layoutget and layoutreturn
pNFS: Clean up pnfs_layoutreturn_free_lsegs()
pNFS: We want return-on-close to complete when evicting the inode
pNFS: Mark layout for return if return-on-close was not sent
net: sunrpc: interpret the return value of kstrtou32 correctly
NFS: Adjust fs_context error logging
NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
Linus Torvalds [Tue, 12 Jan 2021 17:16:59 +0000 (09:16 -0800)]
Merge tag 'mkp-scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi
Pull SCSI target fix from Martin Petersen:
"This addresses an issue in the SCSI target subsystem. A connected
initiator could specify IDs for any configured backing store device,
not just the ones explicitly made visible to the host.
The remedy is to honor the access control list when doing ID
descriptor lookups"
* tag 'mkp-scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi:
scsi: target: Fix XCOPY NAA identifier lookup
Peter Geis [Fri, 8 Jan 2021 13:59:13 +0000 (13:59 +0000)]
ALSA: hda/tegra: fix tegra-hda on tegra30 soc
Currently hda on tegra30 fails to open a stream with an input/output error.
For example:
speaker-test -Dhw:0,3 -c 2
speaker-test 1.2.2
Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error
The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.
The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.
For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;
On Tegra30, ratio = 32/4 = 8 (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194, ratio = 32/4 = 8 (FAIL) ==> Earlier workaround was
applied for it
If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.
Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.
[1] commit 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on
Tegra194")
Peter Geis [Fri, 8 Jan 2021 13:59:12 +0000 (13:59 +0000)]
clk: tegra30: Add hda clock default rates to clock driver
Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.
Jakub Kicinski [Tue, 12 Jan 2021 02:20:12 +0000 (18:20 -0800)]
Merge branch 'skb-frag-kmap_atomic-fixes'
Willem de Bruijn says:
====================
skb frag: kmap_atomic fixes
skb frags may be backed by highmem and/or compound pages. Various
code calls kmap_atomic to safely access highmem pages. But this
needs additional care for compound pages. Fix a few issues:
patch 1 expect kmap mappings with CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
patch 2 fixes kmap_atomic + compound page support in skb_seq_read
patch 3 fixes kmap_atomic + compound page support in esp
====================
esp(6)_output_head uses skb_page_frag_refill to allocate a buffer for
the esp trailer.
It accesses the page with kmap_atomic to handle highmem. But
skb_page_frag_refill can return compound pages, of which
kmap_atomic only maps the first underlying page.
skb_page_frag_refill does not return highmem, because flag
__GFP_HIGHMEM is not set. ESP uses it in the same manner as TCP.
That also does not call kmap_atomic, but directly uses page_address,
in skb_copy_to_page_nocache. Do the same for ESP.
This issue has become easier to trigger with recent kmap local
debugging feature CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Willem de Bruijn <[email protected]> Acked-by: Steffen Klassert <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
skb_seq_read iterates over an skb, returning pointer and length of
the next data range with each call.
It relies on kmap_atomic to access highmem pages when needed.
An skb frag may be backed by a compound page, but kmap_atomic maps
only a single page. There are not enough kmap slots to always map all
pages concurrently.
Instead, if kmap_atomic is needed, iterate over each page.
As this increases the number of calls, avoid this unless needed.
The necessary condition is captured in skb_frag_must_loop.
I tried to make the change as obvious as possible. It should be easy
to verify that nothing changes if skb_frag_must_loop returns false.
Tested:
On an x86 platform with
CONFIG_HIGHMEM=y
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
Run
ip link set dev lo mtu 1500
iptables -A OUTPUT -m string --string 'badstring' -algo bm -j ACCEPT
dd if=/dev/urandom of=in bs=1M count=20
nc -l -p 8000 > /dev/null &
nc -w 1 -q 0 localhost 8000 < in
net: support kmap_local forced debugging in skb_frag_foreach
Skb frags may be backed by highmem and/or compound pages. Highmem
pages need kmap_atomic mappings to access. But kmap_atomic maps a
single page, not the entire compound page.
skb_foreach_page iterates over an skb frag, in one step in the common
case, page by page only if kmap_atomic must be called for each page.
The decision logic is captured in skb_frag_must_loop.
CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP extends kmap from highmem to all
pages, to increase code coverage.
rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM request
MSFT ActiveSync implementation requires that the size of the response for
incoming query is to be provided in the request input length. Failure to
set the input size proper results in failed request transfer, where the
ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L)
error.
Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size
of the response in order for the ActiveSync to properly respond to the
request.
Stefan Chulski [Sun, 10 Jan 2021 14:30:59 +0000 (16:30 +0200)]
net: mvpp2: prs: improve ipv4 parse flow
Patch didn't fix any issue, just improve parse flow
and align ipv4 parse flow with ipv6 parse flow.
Currently ipv4 kenguru parser first check IP protocol(TCP/UDP)
and then destination IP address.
Patch introduce reverse ipv4 parse, first destination IP address parsed
and only then IP protocol.
This would allow extend capability for packet L4 parsing and align ipv4
parsing flow with ipv6.
Danilo Carvalho [Fri, 8 Jan 2021 22:21:04 +0000 (22:21 +0000)]
Fix whitespace in uapi/linux/tcp.h.
List of things fixed:
- Two of the socket options were idented with spaces instead of tabs.
- Trailing whitespace in some lines.
- Improper spacing around parenthesis caught by checkpatch.pl.
- Mix of space and tabs in tcp_word_hdr union.
bareudp_dellink() only needs the device list to hand it to
unregister_netdevice_queue(). We can pass NULL in, and
unregister_netdevice_queue() will do the unregistering.
There is no chance for batching on the error path, anyway.
projects / linux.git / log