Arnd Bergmann [Mon, 20 Dec 2021 15:13:25 +0000 (16:13 +0100)]
Merge tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.17
1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink
E850-96 board and WinLink vendor prefix.
2. Add pinctrl definitions used for Exynos850.
3. Minor fixes and improvements.
4. Convert serial on ExynosAutov9 to new hierarchy where serial is part
of USI node.
* tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
dt-bindings: arm: samsung: document jackpotlte board binding
dt-bindings: soc: samsung: Fix I2C clocks order in USI binding example
arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9
dt-bindings: soc: samsung: Add Exynos USI bindings
arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
Arnd Bergmann [Mon, 20 Dec 2021 15:12:37 +0000 (16:12 +0100)]
Merge tag 'samsung-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.17
1. Fix Bluetooth GPIO on GT-I9100.
2. Minor improvements and dtschema fixes.
* tag 'samsung-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
ARM: dts: exynos: Use interrupt for BCM4330 host wakeup in I9100
ARM: dts: exynos: Fix BCM4330 Bluetooth reset polarity in I9100
Arnd Bergmann [Mon, 20 Dec 2021 15:08:20 +0000 (16:08 +0100)]
Merge tag 'v5.16-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt8183:
- add Acer Chromebook 314
- evb: add node to read thermisor from AUXIN0
- add several sku's for Lenovo IdeaPad Flex 3 Chromebook and ASUS Chromebook Detachable CM3
- update sensor mapping of the board temperature sensor
- add some coresight nodes for CPU debugging
- USB Type C connector description to all Chromebooks
mt8192, mt8516:
- smaller i2c related fixes
mt8173:
- enable backlight enable pin to all Chromebooks
mt7986[a,b]:
- add basic support
* tag 'v5.16-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits)
arm64: dts: mediatek: add pinctrl support for mt7986b
arm64: dts: mediatek: add pinctrl support for mt7986a
arm64: dts: mt8183: kukui: Add Type C node
arm64: dts: mediatek: add basic mt7986 support
dt-bindings: arm64: dts: mediatek: Add mt7986 series
arm64: dts: mt8183: support coresight-cpu-debug for mt8183
arm64: dts: mediatek: mt8173-elm: Add backlight enable pin config
arm64: dts: mediatek: mt8173-elm: Move pwm pinctrl to pwm0 node
arm64: dts: mt8183-kukui: Update Tboard sensor mapping table
arm64: dts: mediatek: mt8173: Add gce-client-reg to display od/ufo
dt-bindings: arm64: dts: mediatek: Add sku22 for mt8183 kakadu board
dt-bindings: arm64: dts: mediatek: Add more SKUs for mt8183 fennel board
dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-cozmo
arm64: dts: mt8183: Add kakadu sku22
arm64: dts: mt8183: Add more fennel SKUs
arm64: dts: mt8183: Add kukui-jacuzzi-cozmo board
arm64: dts: mt8183: jacuzzi: remove unused ddc-i2c-bus
arm64: dts: mediatek: mt8183-evb: Add node for thermistor
arm64: dts: mediatek: mt8516: remove 2 invalid i2c clocks
arm64: dts: mediatek: mt8192: fix i2c node names
...
Arnd Bergmann [Mon, 20 Dec 2021 15:06:27 +0000 (16:06 +0100)]
Merge tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree change for 5.17:
- New SoC support: i.MX8 ULP.
- New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2,
i.MX8 ULP EVK.
- A series from Adam Ford to enable Camera and USB support for
imx8mm-beacon device.
- Add overlays for various serdes protocols on LS1028A QDS board using
different PHY cards.
- A series from Biwen Li to update LS1028A devices around RTC, flextimer
and PWM support.
- A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M
devices.
- A couple of changes from Lucas Stach to update nitrogen8-som Ethernet
PHY and I2C1 pad configuration.
- A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3
dtsi for Librem5 devices.
- Add cache descriptions for i.MX8 SoCs.
- A series from Vladimir Oltean to update ls1028a-rdb device tree in
order to share the DTS between Linux and U-Boot.
- Random device addtion to various i.MX8 and LX2160A based devices.
* tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits)
arm64: dts: imx8mp-evk: configure multiple queues on eqos
arm64: dts: ls1028a-qds: add overlays for various serdes protocols
arm64: dts: ls1028a-qds: enable lpuart1
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
arm64: dts: ls1028a-rdb: enable pwm0
arm64: dts: ls1028a: add flextimer based pwm nodes
arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
arm64: dts: ls1028a: Add PCIe EP nodes
arm64: dts: lx2162a-qds: add interrupt line for RTC node
arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes
arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes
arm64: dts: lx2160a-qds: Add mdio mux nodes
arm64: dts: lx2160a: add optee-tz node
arm64: dts: lx2160a-rdb: Add Inphi PHY node
arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi
arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl
arm64: dts: nitrogen8-som: correct network PHY reset
arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property
arm64: dts: imx8ulp: add power domain entry for usdhc
...
Arnd Bergmann [Mon, 20 Dec 2021 15:04:56 +0000 (16:04 +0100)]
Merge tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm device tree change for 5.17:
- New board support: TQ-Systems MBa6x, Y Soft IOTA Crux/Crux+ board,
JOZ Access Point, Phytec PEB-WLBT-05 support, BSH SMM-M2 IMX6ULZ
SystemMaster.
- Update SPBA bus node name to match binding schema.
- A series from Christoph Niedermaier to update imx6qdl-dhcom board
around Ethernet and USB support.
- A series from Giulio Benetti to clean up undocumented/unused fixed
clock compatibles.
- A series from Laurent Pinchart to update i.MX7 MIPI_CSI support.
- A couple of changes from Russell to update phy-mode for
vf610-zii-dev-rev-b board.
- Add Wacom digitizer support for imx7d-remarkable2 device.
* tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (36 commits)
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer
ARM: dts: imx7d-remarkable2: add wacom digitizer device
ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster
ARM: dts: imx6qdl-dhcom: Identify the PHY by ethernet-phy-id0007.c0f0
ARM: dts: imx6qdl-dhcom: Align PHY reset timing with other DHCOM SoMs
ARM: dts: imx6qdl: drop "fsl,imx-ckih1"
ARM: dts: imx6qdl: drop "fsl,imx-ckil"
ARM: dts: imx6qdl: drop "fsl,imx-osc"
ARM: dts: imx53: drop "fsl,imx-ckih2"
ARM: dts: imx53: drop "fsl,imx-ckih1"
ARM: dts: imx53: drop "fsl,imx-ckil"
ARM: dts: imx53: drop "fsl,imx-osc"
ARM: dts: imx51: drop "fsl,imx-ckih2"
ARM: dts: imx51: drop "fsl,imx-ckih1"
ARM: dts: imx51: drop "fsl,imx-ckil"
ARM: dts: imx51: drop "fsl,imx-osc"
ARM: dts: imx50: drop "fsl,imx-ckih2"
...
Arnd Bergmann [Mon, 20 Dec 2021 15:02:24 +0000 (16:02 +0100)]
Merge tag 'imx-bindings-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX dt-bindings update for 5.17:
- New bindings for i.MX SPBA bus and i.MX8MN DISP blk-ctrl.
- New vendor prefix for BSH Hausgeraete GmbH and JOZ BV.
- New compatibles for various i.MX6 and i.MX8 boards.
- Add optional 'fsl,continuous-burst-clk' property support for imx-weim
binding.
* tag 'imx-bindings-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
dt-bindings: arm: fsl: Add BSH SMM-M2 IMX6ULZ SystemMaster board
dt-bindings: arm: fsl: Add iMX8MN BSH SMM S2 boards
dt-bindings: Add vendor prefix for BSH Hausgeraete GmbH
dt-bindings: soc: imx: Add binding doc for spba bus
dt-bindings: bus: imx-weim: add words about continuous bclk
dt-bindings: arm: fsl: add TQMa8Mx boards
dt-bindings: arm: fsl: add TQMa8MxNL boards
dt-bindings: arm: fsl: add TQMa8MxML boards
dt-bindings: arm: fsl: Add binding for imx8ulp evk
dt-bindings: arm: fsl: Add Y Soft IOTA Crux/Crux+ boards
dt-bindings: arm: fsl: add TQ-Systems boards based on i.MX6Q/QP/DL
dt-bindings: arm: fsl: add JOZ Access Point
dt-bindings: vendor-prefixes: Add an entry for JOZ BV
Rob Herring [Fri, 17 Dec 2021 22:12:32 +0000 (16:12 -0600)]
ARM: dts: Remove "spidev" nodes
"spidev" is not a real device, but a Linux implementation detail. It has
never been documented either. The kernel has WARNed on the use of it for
over 6 years. Time to remove its usage from the tree.
Arnd Bergmann [Mon, 20 Dec 2021 14:55:51 +0000 (15:55 +0100)]
Merge tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
Devicetree changes for TI K3 platforms for v5.17 merge window:
* New Platforms:
- J721s2 SoC, SoM and Common Processor Board support
* New features:
- CAN support on AM64 EVM and SK
- TimeSync Router on AM64
* Fixes:
- Correct d-cache-sets info on J7200
- Fix L2 cache-sets value for J721e/J7200/AM64
- Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200
- Disable McASP on IoT2050 board to fix dtbs_check warnings
* tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arch: arm64: ti: Add support J721S2 Common Processor Board
arm64: dts: ti: Add initial support for J721S2 System on Module
arm64: dts: ti: Add initial support for J721S2 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2
dt-bindings: arm: ti: Add bindings for J721s2 SoC
arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level
arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK
arm64: dts: ti: k3-am64-main: Add support for MCAN
arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes
arm64: dts: ti: k3-j721e: Add support for MCAN nodes
arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes
arm64: dts: ti: k3-am65-mcu: Add Support for MCAN
arm64: dts: ti: k3-am64-main: add timesync router node
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
arm64: dts: ti: k3-am642: Fix the L2 cache sets
arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
arm64: dts: ti: k3-j721e: correct cache-sets info
Arnd Bergmann [Mon, 20 Dec 2021 14:49:16 +0000 (15:49 +0100)]
Merge tag 'tegra-for-5.17-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.17-rc1
The vast majority of this contains various updates and cleanups to the
Tegra device trees that will eventually help validate all of them using
the dt-schema infrastructure.
Another notable chunk of this contains additional Tegra234 support as
well as support for the new Jetson AGX Orin Developer Kit.
* tag 'tegra-for-5.17-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (47 commits)
arm64: tegra: Add host1x hotflush reset on Tegra210
arm64: tegra: Hook up MMC and BPMP to memory controller
arm64: tegra: Add memory controller on Tegra234
arm64: tegra: Add EMC general interrupt on Tegra194
arm64: tegra: Update SDMMC4 speeds for Tegra194
arm64: tegra: Add dma-coherent for Tegra194 VIC
arm64: tegra: Rename Ethernet PHY nodes
arm64: tegra: Remove unused only-1-8-v properties
arm64: tegra: Sort Tegra210 XUSB clocks correctly
arm64: tegra: Add missing TSEC properties on Tegra210
arm64: tegra: jetson-nano: Remove extra PLL power supplies for PCIe and XUSB
arm64: tegra: smaug: Remove extra PLL power supplies for XUSB
arm64: tegra: jetson-tx1: Remove extra PLL power supplies for PCIe and XUSB
arm64: tegra: Rename GPIO hog nodes to match schema
arm64: tegra: Remove unsupported regulator properties
arm64: tegra: Rename TCU node to "serial"
arm64: tegra: Remove undocumented Tegra194 PCIe "core_m" clock
arm64: tegra: Drop unused properties for Tegra194 PCIe
arm64: tegra: Fix Tegra194 HSP compatible string
arm64: tegra: Drop unsupported nvidia,lpdr property
...
Sam Protsenko [Fri, 17 Dec 2021 16:15:47 +0000 (18:15 +0200)]
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
All Exynos850 GPIO blocks can use EXYNOS5420_PIN_DRV* definitions,
except GPIO_HSI block. Add pin drive strength definitions for GPIO_HSI
block correspondingly.
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in
Armada 7k and 8k both are left disabled by the SoC DTSI.
This first of all makes no sense as they are always present due to being
SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2
pins for regulators and SD card support without enabling them first.
So, enable both of them like Armada 7k and 8k do.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support") Signed-off-by: Robert Marko <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
Robert Marko [Fri, 12 Nov 2021 13:44:02 +0000 (14:44 +0100)]
arm64: dts: marvell: cn9130: add GPIO and SPI aliases
CN9130 has one CP115 built in, which like the CP110 has 2 GPIO and 2 SPI
controllers built-in.
However, unlike the Armada 7k and 8k the SoC DTSI doesn't add the required
aliases as both the Orion SPI driver and MVEBU GPIO drivers require the
aliases to be present.
So add the required aliases for GPIO and SPI controllers.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support") Signed-off-by: Robert Marko <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
Pali Rohár [Wed, 8 Dec 2021 02:40:35 +0000 (03:40 +0100)]
arm64: dts: marvell: armada-37xx: Add xtal clock to comphy node
Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the
reference xtal clock. So add missing xtal clock source into comphy device
tree node. If the property is not present, the driver defaults to 25 MHz
xtal rate (which, as far as we know, is used by all the existing boards).
Arnd Bergmann [Fri, 17 Dec 2021 14:53:29 +0000 (15:53 +0100)]
Merge tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.17 (take two)
- Initial support for the R-Car S4-8 SoC on the Spider CPU and
BreakOut boards,
- MIPI DSI display support for the R-Car V3u SoC and the Falcon board
stack,
- Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK
development board,
- Miscellaneous fixes and improvements.
Arnd Bergmann [Fri, 17 Dec 2021 14:52:07 +0000 (15:52 +0100)]
Merge tag 'sunxi-dt-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual round of DT patches for the 5.17 merge window, with:
- Introduction of the chassis-type property
- I2C, SPDIF support for the Tanix TX6
- Memory frequency scaling for the A64 and H5
- Hantro G2 support for the H6
- New Board: Tanix TX6 Mini
Dmitry Osipenko [Tue, 30 Nov 2021 23:23:11 +0000 (02:23 +0300)]
dt-bindings: clock: tegra-car: Document new clock sub-nodes
Document sub-nodes which describe Tegra SoC clocks that require a higher
voltage of the core power domain in order to operate properly on a higher
clock rates. Each node contains a phandle to OPP table and power domain.
The root PLLs and system clocks don't have any specific device dedicated
to them, clock controller is in charge of managing power for them.
Svyatoslav Ryhel [Sat, 11 Dec 2021 21:13:45 +0000 (00:13 +0300)]
dt-bindings: ARM: tegra: Document ASUS Transformers
Document Tegra20/30/114-based ASUS Transformer Series tablet devices.
This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG
Infinity TF700T, TF701T.
Thierry Reding [Mon, 6 Dec 2021 15:55:59 +0000 (16:55 +0100)]
dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties
Add the interconnects, interconnect-names and iommus properties to the
device tree bindings for the Tegra XUDC controller. These are used to
describe the device's paths to and from memory.
Thierry Reding [Mon, 13 Dec 2021 16:21:51 +0000 (17:21 +0100)]
arm64: tegra: Hook up MMC and BPMP to memory controller
Use the interconnects property to hook up the MMC and BPMP to the memory
controller. This is needed to set the correct bus-level DMA mask, which
is a prerequisite for adding IOMMU support.
Thierry Reding [Tue, 7 Dec 2021 14:05:32 +0000 (15:05 +0100)]
arm64: tegra: Sort Tegra210 XUSB clocks correctly
Make the order of the clocks and clock-names properties match the order
in the device tree bindings. This isn't strictly necessary from a point
of view of the operating system because matching will be done based on
the clock-names, but it makes it easier to validate the device trees
against the DT schema.
Thierry Reding [Tue, 7 Dec 2021 13:47:47 +0000 (14:47 +0100)]
arm64: tegra: Drop unused properties for Tegra194 PCIe
The num-viewport property is never used and can be dropped, whereas the
"iommus" property is not needed since we use "iommu-map-mask" and
"iommu-map" already.
Thierry Reding [Tue, 7 Dec 2021 13:28:29 +0000 (14:28 +0100)]
arm64: tegra: Adjust length of CCPLEX cluster MMIO region
The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.
Thierry Reding [Tue, 7 Dec 2021 13:21:18 +0000 (14:21 +0100)]
arm64: tegra: Sort Tegra132 XUSB clocks correctly
Make the order of the clocks and clock-names properties match the order
in the device tree bindings. This isn't strictly necessary from a point
of view of the operating system because matching will be done based on
the clock-names, but it makes it easier to validate the device trees
against the DT schema.
Thierry Reding [Tue, 7 Dec 2021 13:17:07 +0000 (14:17 +0100)]
arm64: tegra: Add OPP tables on Tegra132
Add peripheral OPP tables on Tegra132 and wire them up to ACTMON and the
EMC. While at it, add the missing "#interconnect-cells" properties to
the memory controller and external memory controller nodes. Also set the
"#reset-cells" property for the memory controller because it exports the
hotflush reset controls.
Thierry Reding [Tue, 7 Dec 2021 13:13:37 +0000 (14:13 +0100)]
arm64: tegra: Fix compatible string for Tegra132 timer
The TKE (time-keeping engine) found on Tegra132 is not backwards
compatible with the version found on Tegra20, so update the compatible
string list accordingly.
Thierry Reding [Thu, 19 Mar 2020 15:45:38 +0000 (16:45 +0100)]
arm64: tegra: Add native timer support on Tegra186
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add the
device tree node on Tegra186.
Thierry Reding [Mon, 6 Dec 2021 17:02:18 +0000 (18:02 +0100)]
arm64: tegra: Rename top-level regulators
Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property shouldn't have a unit-address either, so drop the unit
address from the node names. To ensure nodes aren't duplicated (in which
case they would end up merged in the final DTB), append the name of the
regulator to the node name.
Thierry Reding [Mon, 6 Dec 2021 16:58:55 +0000 (17:58 +0100)]
arm64: tegra: Rename top-level clocks
Clocks defined at the top level in device tree are no longer part of a
simple bus and therefore don't have a reg property. Nodes without a reg
property shouldn't have a unit-address either, so drop the unit address
from the node names. To ensure nodes aren't duplicated (in which case
they would end up merged in the final DTB), append the name of the clock
to the node name.
Jon Hunter [Wed, 1 Dec 2021 15:57:16 +0000 (15:57 +0000)]
arm64: tegra: Add ISO SMMU controller for Tegra194
The display controllers are attached to a separate ARM SMMU instance
that is dedicated to servicing isochronous memory clients. Add this ISO
instance of the ARM SMMU to device tree.
Please note that the display controllers are not hooked up to this SMMU
yet, because we are still missing a means to transition framebuffers
used by the bootloader to the kernel.
This based upon an initial patch by Thierry Reding <[email protected]>.
Prathamesh Shete [Tue, 16 Nov 2021 12:02:36 +0000 (17:32 +0530)]
arm64: tegra: Add support to enumerate SD in UHS mode
Add support to enumerate SD in UHS mode on Tegra194. Add required
device-tree properties in SDMMC1 and SDMMC3 instances to enable dynamic
pad voltage switching and enumerate SD card in UHS-I modes.
Thierry Reding [Fri, 12 Nov 2021 13:19:04 +0000 (14:19 +0100)]
arm64: tegra: Describe Tegra234 CPU hierarchy
The NVIDIA Tegra234 SoC has 3 clusters of 4 Cortex-A78AE CPU cores each,
for a total of 12 CPUs. Each CPU has 64 KiB instruction and data caches
with each cluster having an additional 256 KiB unified L2 cache and a 2
MiB L3 cache.
Thierry Reding [Fri, 12 Nov 2021 12:35:37 +0000 (13:35 +0100)]
arm64: tegra: Fixup SYSRAM references
The json-schema bindings for SRAM expect the nodes to be called "sram"
rather than "sysram" or "shmem". Furthermore, place the brackets around
the SYSRAM references such that a two-element array is created rather
than a two-element array nested in a single-element array. This is not
relevant for device tree itself, but allows the nodes to be properly
validated against json-schema bindings.
Thierry Reding [Thu, 16 Dec 2021 15:50:49 +0000 (16:50 +0100)]
Merge tag 'tegra-for-5.17-dt-bindings-memory' into for-5.17/arm64/dt
dt-bindings: memory: Add Tegra234 support
This stable tag contains the addition of the EMC clock ID and an initial
list of memory client IDs for Tegra234 and will be shared between the
memory and ARM SoC trees.
Thierry Reding [Mon, 13 Dec 2021 16:21:47 +0000 (17:21 +0100)]
dt-bindings: memory: tegra: Add Tegra234 support
Document the variant of the memory controller and external memory
controllers found on Tegra234 and add some memory client and SMMU
stream ID definitions for use in device tree files.