Simon Horman [Wed, 9 Oct 2024 08:47:22 +0000 (09:47 +0100)]
MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL]
We already exclude wireless drivers from the netdev@ traffic, to
delegate it to linux-wireless@, and avoid overwhelming netdev@.
Many of the following wireless-related sections MAINTAINERS
are already not included in the NETWORKING [GENERAL] section.
For consistency, exclude those that are.
Honglei Wang [Thu, 10 Oct 2024 03:34:05 +0000 (11:34 +0800)]
sched_ext: use correct function name in pick_task_scx() warning message
pick_next_task_scx() was turned into pick_task_scx() since
commit 753e2836d139 ("sched_ext: Unify regular and core-sched pick
task paths"). Update the outdated message.
This patch add a toy implementation that performs a simple return to
prevent such panic. This is because MSS can be set in sock_create_kern
or smc_setsockopt, similar to how it's done in AF_SMC. However, for
AF_SMC, there is currently no way to synchronize MSS within
__sys_connect_file. This toy implementation lays the groundwork for us
to support such feature for IPPROTO_SMC in the future.
Simon Horman [Wed, 9 Oct 2024 09:12:19 +0000 (10:12 +0100)]
docs: netdev: document guidance on cleanup patches
The purpose of this section is to document what is the current practice
regarding clean-up patches which address checkpatch warnings and similar
problems. I feel there is a value in having this documented so others
can easily refer to it.
Clearly this topic is subjective. And to some extent the current
practice discourages a wider range of patches than is described here.
But I feel it is best to start somewhere, with the most well established
part of the current practice.
Before commit addf9b90de22 ("net: rtnetlink: use rcu to free rtnl
message handlers"), once the first rtnl_register_module() allocated
rtnl_msg_handlers[PF_PHONET], the following calls never failed.
However, after the commit, rtnl_register_module() could fail silently
to allocate rtnl_msg_handlers[PF_PHONET][msgtype] and requires error
handling for each call.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's use rtnl_register_many() to handle the errors easily.
Fixes: addf9b90de22 ("net: rtnetlink: use rcu to free rtnl message handlers") Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Rémi Denis-Courmont <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Since introduced, mpls_init() has been ignoring the returned
value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 03c0566542f4 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Since introduced, mctp has been ignoring the returned value of
rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Since introduced, br_vlan_rtnl_init() has been ignoring the returned
value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: 8dcea187088b ("net: bridge: vlan: add rtm definitions and dump support") Fixes: f26b296585dc ("net: bridge: vlan: add new rtm message support") Fixes: adb3ce9bcb0f ("net: bridge: vlan: add del rtm message support") Signed-off-by: Kuniyuki Iwashima <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Since introduced, vxlan_vnifilter_init() has been ignoring the
returned value of rtnl_register_module(), which could fail silently.
Handling the error allows users to view a module as an all-or-nothing
thing in terms of the rtnetlink functionality. This prevents syzkaller
from reporting spurious errors from its tests, where OOM often occurs
and module is automatically loaded.
Let's handle the errors by rtnl_register_many().
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
rtnetlink: Add bulk registration helpers for rtnetlink message handlers.
Before commit addf9b90de22 ("net: rtnetlink: use rcu to free rtnl message
handlers"), once rtnl_msg_handlers[protocol] was allocated, the following
rtnl_register_module() for the same protocol never failed.
However, after the commit, rtnl_msg_handler[protocol][msgtype] needs to
be allocated in each rtnl_register_module(), so each call could fail.
Many callers of rtnl_register_module() do not handle the returned error,
and we need to add many error handlings.
To handle that easily, let's add wrapper functions for bulk registration
of rtnetlink message handlers.
Ulf Hansson [Wed, 2 Oct 2024 12:22:23 +0000 (14:22 +0200)]
PM: domains: Fix alloc/free in dev_pm_domain_attach|detach_list()
The dev_pm_domain_attach|detach_list() functions are not resource managed,
hence they should not use devm_* helpers to manage allocation/freeing of
data. Let's fix this by converting to the traditional alloc/free functions.
The reverted commit was not ready to be applied due to dependency on other
OPP/pmdomain changes that didn't make it for the last release cycle. Let's
revert it to fix the behaviour.
Paolo Abeni [Thu, 10 Oct 2024 11:50:55 +0000 (13:50 +0200)]
Merge tag 'nf-24-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restrict xtables extensions to families that are safe, syzbot found
a way to combine ebtables with extensions that are never used by
userspace tools. From Florian Westphal.
2) Set l3mdev inconditionally whenever possible in nft_fib to fix lookup
mismatch, also from Florian.
netfilter pull request 24-10-09
* tag 'nf-24-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: conntrack_vrf.sh: add fib test case
netfilter: fib: check correct rtable in vrf setups
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
====================
mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling
While working with the T-Head 1520 LicheePi4A SoC, certain conditions
arose that allowed me to reproduce a race issue in the sdhci code.
To reproduce the bug, you need to enable the sdio1 controller in the
device tree file
`arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi` as follows:
Here's what happens: the __mmc_start_request function is called with
opcode 5. Since the power to the Wi-Fi card, which resides on this SDIO
bus, is initially off after the reset, an interrupt SDHCI_INT_TIMEOUT is
triggered. Immediately after that, a second interrupt SDHCI_INT_RESPONSE
is triggered. Depending on the exact timing, these conditions can
trigger the following race problem:
1) The sdhci_cmd_irq top half handles the command as an error. It sets
host->cmd to NULL and host->pending_reset to true.
2) The sdhci_thread_irq bottom half is scheduled next and executes faster
than the second interrupt handler for SDHCI_INT_RESPONSE. It clears
host->pending_reset before the SDHCI_INT_RESPONSE handler runs.
3) The pending interrupt SDHCI_INT_RESPONSE handler gets called, triggering
a code path that prints: "mmc2: Got command interrupt 0x00000001 even
though no command operation was in progress."
To solve this issue, we need to clear pending interrupts when resetting
host->pending_reset. This ensures that after sdhci_threaded_irq restores
interrupts, there are no pending stale interrupts.
The behavior observed here is non-compliant with the SDHCI standard.
Place the code in the sdhci-of-dwcmshc driver to account for a
hardware-specific quirk instead of the core SDHCI code.
Eric Dumazet [Tue, 8 Oct 2024 14:31:10 +0000 (14:31 +0000)]
net: do not delay dst_entries_add() in dst_release()
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels.
Herbert Xu [Wed, 9 Oct 2024 08:38:48 +0000 (16:38 +0800)]
crypto: marvell/cesa - Disable hash algorithms
Disable cesa hash algorithms by lowering the priority because they
appear to be broken when invoked in parallel. This allows them to
still be tested for debugging purposes.
Herbert Xu [Sun, 6 Oct 2024 01:18:37 +0000 (09:18 +0800)]
crypto: api - Fix liveliness check in crypto_alg_tested
As algorithm testing is carried out without holding the main crypto
lock, it is always possible for the algorithm to go away during the
test.
So before crypto_alg_tested updates the status of the tested alg,
it checks whether it's still on the list of all algorithms. This
is inaccurate because it may be off the main list but still on the
list of algorithms to be removed.
Updating the algorithm status is safe per se as the larval still
holds a reference to it. However, killing spawns of other algorithms
that are of lower priority is clearly a deficiency as it adds
unnecessary churn.
Fix the test by checking whether the algorithm is dead.
Damien Le Moal [Thu, 10 Oct 2024 02:01:17 +0000 (11:01 +0900)]
ata: libata: Update MAINTAINERS file
Modify the entry for the ahci_platform driver (LIBATA SATA
AHCI PLATFORM devices support) in the MAINTAINERS file to remove Jens
as maintainer. Also remove all references to Jens block tree from the
various LIBATA driver entries as the tree reference for these is defined
by the LIBATA SUBSYSTEM entry.
Janne Grunau [Sun, 6 Oct 2024 17:49:45 +0000 (19:49 +0200)]
drm/fbdev-dma: Only cleanup deferred I/O if necessary
Commit 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if
necessary") initializes deferred I/O only if it is used.
drm_fbdev_dma_fb_destroy() however calls fb_deferred_io_cleanup()
unconditionally with struct fb_info.fbdefio == NULL. KASAN with the
out-of-tree Apple silicon display driver posts following warning from
__flush_work() of a random struct work_struct instead of the expected
NULL pointer derefs.
OF: ERROR: memory leak before free overlay changeset, /kunit-test
In of_overlay_apply_kunit_cleanup(), the "np" should be associated with
fake instead of test to call of_node_put(), so the node is put before
the overlay is removed.
This series contains updates to ice, i40e, igb, and e1000e drivers.
For ice:
Marcin allows driver to load, into safe mode, when DDP package is
missing or corrupted and adjusts the netif_is_ice() check to
account for when the device is in safe mode. He also fixes an
out-of-bounds issue when MSI-X are increased for VFs.
Wojciech clears FDB entries on reset to match the hardware state.
For i40e:
Aleksandr adds locking around MACVLAN filters to prevent memory leaks
due to concurrency issues.
For igb:
Mohamed Khalfella adds a check to not attempt to bring up an already
running interface on non-fatal PCIe errors.
For e1000e:
Vitaly changes board type for I219 to more closely match the hardware
and stop PHY issues.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: change I219 (19) devices to ADP
igb: Do not bring the device up after non-fatal error
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
ice: Fix increasing MSI-X on VF
ice: Flush FDB entries before reset
ice: Fix netif_is_ice() in Safe Mode
ice: Fix entering Safe Mode
====================
====================
mptcp: misc. fixes involving fallback to TCP
- Patch 1: better handle DSS corruptions from a bugged peer: reducing
warnings, doing a fallback or a reset depending on the subflow state.
For >= v5.7.
- Patch 2: fix DSS corruption due to large pmtu xmit, where MPTCP was
not taken into account. For >= v5.6.
- Patch 3: fallback when MPTCP opts are dropped after the first data
packet, instead of resetting the connection. For >= v5.6.
- Patch 4: restrict the removal of a subflow to other closing states, a
better fix, for a recent one. For >= v5.10.
====================
In a previous fix, the in-kernel path-manager has been modified not to
retrigger the removal of a subflow if it was already closed, e.g. when
the initial subflow is removed, but kept in the subflows list.
To be complete, this fix should also skip the subflows that are in any
closing state: mptcp_close_ssk() will initiate the closure, but the
switch to the TCP_CLOSE state depends on the other peer.
mptcp: fallback when MPTCP opts are dropped after 1st data
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Additionally syzkaller provided a nice reproducer. The repro enables
pmtu on the loopback device, leading to tcp_mtu_probe() generating
very large probe packets.
tcp_can_coalesce_send_queue_head() currently does not check for
mptcp-level invariants, and allowed the creation of cross-DSS probes,
leading to the mentioned corruption.
Address the issue teaching tcp_can_coalesce_send_queue_head() about
mptcp using the tcp_skb_can_collapse(), also reducing the code
duplication.
Paolo Abeni [Tue, 8 Oct 2024 11:04:52 +0000 (13:04 +0200)]
mptcp: handle consistently DSS corruption
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Breno Leitao [Tue, 8 Oct 2024 09:43:24 +0000 (02:43 -0700)]
net: netconsole: fix wrong warning
A warning is triggered when there is insufficient space in the buffer
for userdata. However, this is not an issue since userdata will be sent
in the next iteration.
Current warning message:
------------[ cut here ]------------
WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0
? write_ext_msg+0x3b6/0x3d0
console_flush_all+0x1e9/0x330
The code incorrectly issues a warning when this_chunk is zero, which is
a valid scenario. The warning should only be triggered when this_chunk
is negative.
Vladimir Oltean [Tue, 8 Oct 2024 09:43:20 +0000 (12:43 +0300)]
net: dsa: refuse cross-chip mirroring operations
In case of a tc mirred action from one switch to another, the behavior
is not correct. We simply tell the source switch driver to program a
mirroring entry towards mirror->to_local_port = to_dp->index, but it is
not even guaranteed that the to_dp belongs to the same switch as dp.
For proper cross-chip support, we would need to go through the
cross-chip notifier layer in switch.c, program the entry on cascade
ports, and introduce new, explicit API for cross-chip mirroring, given
that intermediary switches should have introspection into the DSA tags
passed through the cascade port (and not just program a port mirror on
the entire cascade port). None of that exists today.
Reject what is not implemented so that user space is not misled into
thinking it works.
Wei Fang [Tue, 8 Oct 2024 06:11:53 +0000 (14:11 +0800)]
net: fec: don't save PTP state if PTP is unsupported
Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on
these platforms fec_ptp_init() is not called and the related members
in fep are not initialized. However, fec_ptp_save_state() is called
unconditionally, which causes the kernel to panic. Therefore, add a
condition so that fec_ptp_save_state() is not called if PTP is not
supported.
Namjae Jeon [Tue, 8 Oct 2024 13:42:57 +0000 (22:42 +0900)]
ksmbd: fix user-after-free from session log off
There is racy issue between smb2 session log off and smb2 session setup.
It will cause user-after-free from session log off.
This add session_lock when setting SMB2_SESSION_EXPIRED and referece
count to session struct not to free session while it is being used.
Jacky Chou [Mon, 7 Oct 2024 03:24:35 +0000 (11:24 +0800)]
net: ftgmac100: fixed not check status from fixed phy
Add error handling from calling fixed_phy_register.
It may return some error, therefore, need to check the status.
And fixed_phy_register needs to bind a device node for mdio.
Add the mac device node for fixed_phy_register function.
This is a reference to this function, of_phy_register_fixed_link().
Linus Torvalds [Wed, 9 Oct 2024 23:01:40 +0000 (16:01 -0700)]
Merge tag 'mm-hotfixes-stable-2024-10-09-15-46' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes, 5 of which are c:stable. All singletons, about half of
which are MM"
* tag 'mm-hotfixes-stable-2024-10-09-15-46' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: zswap: delete comments for "value" member of 'struct zswap_entry'.
CREDITS: sort alphabetically by name
secretmem: disable memfd_secret() if arch cannot set direct map
.mailmap: update Fangrui's email
mm/huge_memory: check pmd_special() only after pmd_present()
resource, kunit: fix user-after-free in resource_test_region_intersects()
fs/proc/kcore.c: allow translation of physical memory addresses
selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test
device-dax: correct pgoff align in dax_set_mapping()
kthread: unpark only parked kthread
Revert "mm: introduce PF_MEMALLOC_NORECLAIM, PF_MEMALLOC_NOWARN"
bcachefs: do not use PF_MEMALLOC_NORECLAIM
netfilter: fib: check correct rtable in vrf setups
We need to init l3mdev unconditionally, else main routing table is searched
and incorrect result is returned unless strict (iif keyword) matching is
requested.
Next patch adds a selftest for this.
Fixes: 2a8a7c0eaa87 ("netfilter: nft_fib: Fix for rpath check with VRF devices") Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761 Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
netfilter: xtables: avoid NFPROTO_UNSPEC where needed
syzbot managed to call xt_cluster match via ebtables:
WARNING: CPU: 0 PID: 11 at net/netfilter/xt_cluster.c:72 xt_cluster_mt+0x196/0x780
[..]
ebt_do_table+0x174b/0x2a40
Module registers to NFPROTO_UNSPEC, but it assumes ipv4/ipv6 packet
processing. As this is only useful to restrict locally terminating
TCP/UDP traffic, register this for ipv4 and ipv6 family only.
Pablo points out that this is a general issue, direct users of the
set/getsockopt interface can call into targets/matches that were only
intended for use with ip(6)tables.
Check all UNSPEC matches and targets for similar issues:
- matches and targets are fine except if they assume skb_network_header()
is valid -- this is only true when called from inet layer: ip(6) stack
pulls the ip/ipv6 header into linear data area.
- targets that return XT_CONTINUE or other xtables verdicts must be
restricted too, they are incompatbile with the ebtables traverser, e.g.
EBT_CONTINUE is a completely different value than XT_CONTINUE.
Most matches/targets are changed to register for NFPROTO_IPV4/IPV6, as
they are provided for use by ip(6)tables.
The MARK target is also used by arptables, so register for NFPROTO_ARP too.
While at it, bail out if connbytes fails to enable the corresponding
conntrack family.
Mohammed Anees [Sat, 5 Oct 2024 13:02:29 +0000 (18:32 +0530)]
bcachefs: Fix NULL pointer dereference in bch2_opt_to_text
This patch adds a bounds check to the bch2_opt_to_text function to prevent
NULL pointer dereferences when accessing the opt->choices array. This
ensures that the index used is within valid bounds before dereferencing.
The new version enhances the readability.
Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=37186860aa7812b331d5 Signed-off-by: Mohammed Anees <[email protected]> Signed-off-by: Kent Overstreet <[email protected]>
Kent Overstreet [Mon, 7 Oct 2024 22:04:21 +0000 (18:04 -0400)]
bcachefs: Disk accounting device validation fixes
- Fix failure to validate that accounting replicas entries point to
valid devices: this wasn't a real bug since they'd be cleaned up by
GC, but is still something we should know about
- Fix failure to validate that dev_data_type entries point to valid
devices: this does fix a real bug, since bch2_accounting_read() would
then try to copy the counters to that device and pop an inconsistent
error when the device didn't exist
- Remove accounting entries that are zeroed or invalid: if we're not
validating them we need to get rid of them: they might not exist in
the superblock, so we need the to trigger the superblock mark path
when they're readded.
This fixes the replication.ktest rereplicate test, which was failing
with "superblock not marked for replicas..."
Kent Overstreet [Thu, 3 Oct 2024 01:23:41 +0000 (21:23 -0400)]
bcachefs: bch2_inode_or_descendents_is_open()
fsck can now correctly check if inodes in interior snapshot nodes are
open/in use.
- Tweak the vfs inode rhashtable so that the subvolume ID isn't hashed,
meaning inums in different subvolumes will hash to the same slot. Note
that this is a hack, and will cause problems if anyone ever has the
same file in many different snapshots open all at the same time.
- Then check if any of those subvolumes is a descendent of the snapshot
ID being checked
There's an inherent race in taking a snapshot while an unlinked file is
open, and then reattaching it in the child snapshot.
In the interior snapshot node the file will appear unlinked, as though
it should be deleted - it's not referenced by anything in that snapshot
- but we can't delete it, because the file data is referenced by the
child snapshot.
This was being handled incorrectly with
propagate_key_to_snapshot_leaves() - but that doesn't resolve the
fundamental inconsistency of "this file looks like it should be deleted
according to normal rules, but - ".
To fix this, we need to fix the rule for when an inode is deleted. The
previous rule, ignoring snapshots (there was no well-defined rule
for with snapshots) was:
Unlinked, non open files are deleted, either at recovery time or
during online fsck
The new rule is:
Unlinked, non open files, that do not exist in child snapshots, are
deleted.
To make this work transactionally, we add a new inode flag,
BCH_INODE_has_child_snapshot; it overrides BCH_INODE_unlinked when
considering whether to delete an inode, or put it on the deleted list.
For transactional consistency, clearing it handled by the inode trigger:
when deleting an inode we check if there are parent inodes which can now
have the BCH_INODE_has_child_snapshot flag cleared.
mm: zswap: delete comments for "value" member of 'struct zswap_entry'.
Made a minor edit in the comments for 'struct zswap_entry' to delete the
description of the 'value' member that was deleted in commit 20a5532ffa53
("mm: remove code to handle same filled pages").
Patrick Roy [Tue, 1 Oct 2024 08:00:41 +0000 (09:00 +0100)]
secretmem: disable memfd_secret() if arch cannot set direct map
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
mm/huge_memory: check pmd_special() only after pmd_present()
We should only check for pmd_special() after we made sure that we have a
present PMD. For example, if we have a migration PMD, pmd_special() might
indicate that we have a special PMD although we really don't.
This fixes confusing migration entries as PFN mappings, and not doing what
we are supposed to do in the "is_swap_pmd()" case further down in the
function -- including messing up COW, page table handling and accounting.
resource, kunit: fix user-after-free in resource_test_region_intersects()
In resource_test_insert_resource(), the pointer is used in error message
after kfree(). This is user-after-free. To fix this, we need to call
kunit_add_action_or_reset() to schedule memory freeing after usage. But
kunit_add_action_or_reset() itself may fail and free the memory. So, its
return value should be checked and abort the test for failure. Then, we
found that other usage of kunit_add_action_or_reset() in
resource_test_region_intersects() needs to be fixed too. We fix all these
user-after-free bugs in this patch.
fs/proc/kcore.c: allow translation of physical memory addresses
When /proc/kcore is read an attempt to read the first two pages results in
HW-specific page swap on s390 and another (so called prefix) pages are
accessed instead. That leads to a wrong read.
Allow architecture-specific translation of memory addresses using
kc_xlate_dev_mem_ptr() and kc_unxlate_dev_mem_ptr() callbacks similarily
to /dev/mem xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() callbacks. That
way an architecture can deal with specific physical memory ranges.
Re-use the existing /dev/mem callback implementation on s390, which
handles the described prefix pages swapping correctly.
For other architectures the default callback is basically NOP. It is
expected the condition (vaddr == __va(__pa(vaddr))) always holds true for
KCORE_RAM memory type.
Donet Tom [Fri, 27 Sep 2024 05:07:52 +0000 (00:07 -0500)]
selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
device-dax: correct pgoff align in dax_set_mapping()
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at 200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G)
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
There is no existing user of those flags. PF_MEMALLOC_NOWARN is dangerous
because a nested allocation context can use GFP_NOFAIL which could cause
unexpected failure. Such a code would be hard to maintain because it
could be deeper in the call chain.
PF_MEMALLOC_NORECLAIM has been added even when it was pointed out [1] that
such a allocation contex is inherently unsafe if the context doesn't fully
control all allocations called from this context.
While PF_MEMALLOC_NOWARN is not dangerous the way PF_MEMALLOC_NORECLAIM is
it doesn't have any user and as Matthew has pointed out we are running out
of those flags so better reclaim it without any real users.
Michal Hocko [Thu, 26 Sep 2024 17:11:50 +0000 (19:11 +0200)]
bcachefs: do not use PF_MEMALLOC_NORECLAIM
Patch series "remove PF_MEMALLOC_NORECLAIM" v3.
This patch (of 2):
bch2_new_inode relies on PF_MEMALLOC_NORECLAIM to try to allocate a new
inode to achieve GFP_NOWAIT semantic while holding locks. If this
allocation fails it will drop locks and use GFP_NOFS allocation context.
We would like to drop PF_MEMALLOC_NORECLAIM because it is really
dangerous to use if the caller doesn't control the full call chain with
this flag set. E.g. if any of the function down the chain needed
GFP_NOFAIL request the PF_MEMALLOC_NORECLAIM would override this and
cause unexpected failure.
While this is not the case in this particular case using the scoped gfp
semantic is not really needed bacause we can easily pus the allocation
context down the chain without too much clutter.
misc: sgi-gru: Don't disable preemption in GRU driver
Disabling preemption in the GRU driver is unnecessary, and clashes with
sleeping locks in several code paths. Remove preempt_disable and
preempt_enable from the GRU driver.
Dai Ngo [Tue, 8 Oct 2024 22:58:07 +0000 (15:58 -0700)]
NFS: remove revoked delegation from server's delegation list
After the delegation is returned to the NFS server remove it
from the server's delegations list to reduce the time it takes
to scan this list.
Network trace captured while running the below script shows the
time taken to service the CB_RECALL increases gradually due to
the overhead of traversing the delegation list in
nfs_delegation_find_inode_server.
The NFS server in this test is a Solaris server which issues
CB_RECALL when receiving the all-zero stateid in the SETATTR.
mount=/mnt/data
for i in $(seq 1 20)
do
echo $i
mkdir $mount/testtarfile$i
time tar -C $mount/testtarfile$i -xf 5000_files.tar
done
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
HID: amd_sfh: Switch to device-managed dmam_alloc_coherent()
Using the device-managed version allows to simplify clean-up in probe()
error path.
Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption.
Niklas Cassel [Tue, 8 Oct 2024 13:58:44 +0000 (15:58 +0200)]
ata: libata: avoid superfluous disk spin down + spin up during hibernation
A user reported that commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi
device manage_system_start_stop") introduced a spin down + immediate spin
up of the disk both when entering and when resuming from hibernation.
This behavior was not there before, and causes an increased latency both
when entering and when resuming from hibernation.
Hibernation is done by three consecutive PM events, in the following order:
1) PM_EVENT_FREEZE
2) PM_EVENT_THAW
3) PM_EVENT_HIBERNATE
Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") modified ata_eh_handle_port_suspend() to call
ata_dev_power_set_standby() (which spins down the disk), for both event
PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE.
Documentation/driver-api/pm/devices.rst, section "Entering Hibernation",
explicitly mentions that PM_EVENT_FREEZE does not have to be put the device
in a low-power state, and actually recommends not doing so. Thus, let's not
spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down
during the subsequent PM_EVENT_HIBERNATE event.)
This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb3a
("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while
PM_EVENT_HIBERNATE will continue to spin down the disk.
This will avoid the superfluous spin down + spin up when entering and
resuming from hibernation, while still making sure that the disk is spun
down before actually entering hibernation.
Steven Rostedt [Tue, 8 Oct 2024 18:32:42 +0000 (14:32 -0400)]
ring-buffer: Do not have boot mapped buffers hook to CPU hotplug
The boot mapped ring buffer has its buffer mapped at a fixed location
found at boot up. It is not dynamic. It cannot grow or be expanded when
new CPUs come online.
Do not hook fixed memory mapped ring buffers to the CPU hotplug callback,
otherwise it can cause a crash when it tries to add the buffer to the
memory that is already fully occupied.
Jijie Shao [Tue, 8 Oct 2024 02:48:36 +0000 (10:48 +0800)]
net: hns3/hns: Update the maintainer for the HNS3/HNS ethernet driver
Yisen Zhuang has left the company in September.
Jian Shen will be responsible for maintaining the
hns3/hns driver's code in the future,
so add Jian Shen to the hns3/hns driver's matainer list.
Xin Long [Mon, 7 Oct 2024 16:25:11 +0000 (12:25 -0400)]
sctp: ensure sk_state is set to CLOSED if hashing fails in sctp_listen_start
If hashing fails in sctp_listen_start(), the socket remains in the
LISTENING state, even though it was not added to the hash table.
This can lead to a scenario where a socket appears to be listening
without actually being accessible.
This patch ensures that if the hashing operation fails, the sk_state
is set back to CLOSED before returning an error.
Note that there is no need to undo the autobind operation if hashing
fails, as the bind port can still be used for next listen() call on
the same socket.
Fixes: 76c6d988aeb3 ("sctp: add sock_reuseport for the sock in __sctp_hash_endpoint") Reported-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Daniel Palmer [Mon, 7 Oct 2024 10:43:17 +0000 (19:43 +0900)]
net: amd: mvme147: Fix probe banner message
Currently this driver prints this line with what looks like
a rogue format specifier when the device is probed:
[ 2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx
Change the printk() for netdev_info() and move it after the
registration has completed so it prints out the name of the
interface properly.
Heiner Kallweit [Mon, 7 Oct 2024 09:57:41 +0000 (11:57 +0200)]
net: phy: realtek: Fix MMD access on RTL8126A-integrated PHY
All MMD reads return 0 for the RTL8126A-integrated PHY. Therefore phylib
assumes it doesn't support EEE, what results in higher power consumption,
and a significantly higher chip temperature in my case.
To fix this split out the PHY driver for the RTL8126A-integrated PHY
and set the read_mmd/write_mmd callbacks to read from vendor-specific
registers.
Fixes: 5befa3728b85 ("net: phy: realtek: add support for RTL8126A-integrated 5Gbps PHY") Cc: [email protected] Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Naohiro Aota [Fri, 4 Oct 2024 04:53:35 +0000 (13:53 +0900)]
btrfs: fix clear_dirty and writeback ordering in submit_one_sector()
This commit is a replay of commit 6252690f7e1b ("btrfs: fix invalid
mapping of extent xarray state"). We need to call
btrfs_folio_clear_dirty() before btrfs_set_range_writeback(), so that
xarray DIRTY tag is cleared.
With a refactoring commit 8189197425e7 ("btrfs: refactor
__extent_writepage_io() to do sector-by-sector submission"), it screwed
up and the order is reversed and causing the same hang. Fix the ordering
now in submit_one_sector().
Fixes: 8189197425e7 ("btrfs: refactor __extent_writepage_io() to do sector-by-sector submission") Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Naohiro Aota <[email protected]> Signed-off-by: David Sterba <[email protected]>
Filipe Manana [Wed, 2 Oct 2024 14:02:56 +0000 (15:02 +0100)]
btrfs: zoned: fix missing RCU locking in error message when loading zone info
At btrfs_load_zone_info() we have an error path that is dereferencing
the name of a device which is a RCU string but we are not holding a RCU
read lock, which is incorrect.
Fix this by using btrfs_err_in_rcu() instead of btrfs_err().
The problem is there since commit 08e11a3db098 ("btrfs: zoned: load zone's
allocation offset"), back then at btrfs_load_block_group_zone_info() but
then later on that code was factored out into the helper
btrfs_load_zone_info() by commit 09a46725cc84 ("btrfs: zoned: factor out
per-zone logic from btrfs_load_block_group_zone_info").
net: ti: icssg-prueth: Fix race condition for VLAN table access
The VLAN table is a shared memory between the two ports/slices
in a ICSSG cluster and this may lead to race condition when the
common code paths for both ports are executed in different CPUs.
Fix the race condition access by locking the shared memory access
Fixes: 487f7323f39a ("net: ti: icssg-prueth: Add helper functions to configure FDB") Signed-off-by: MD Danish Anwar <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Brian Foster [Fri, 6 Sep 2024 11:40:51 +0000 (07:40 -0400)]
xfs: don't free cowblocks from under dirty pagecache on unshare
fallocate unshare mode explicitly breaks extent sharing. When a
command completes, it checks the data fork for any remaining shared
extents to determine whether the reflink inode flag and COW fork
preallocation can be removed. This logic doesn't consider in-core
pagecache and I/O state, however, which means we can unsafely remove
COW fork blocks that are still needed under certain conditions.
For example, consider the following command sequence:
This allocates a data block at offset 0, shares it, and then
overwrites it with a larger buffered write. The overwrite triggers
COW fork preallocation, 32 blocks by default, which maps the entire
32k write to delalloc in the COW fork. All but the shared block at
offset 0 remains hole mapped in the data fork. The unshare command
redirties and flushes the folio at offset 0, removing the only
shared extent from the inode. Since the inode no longer maps shared
extents, unshare purges the COW fork before the remaining 28k may
have written back.
This leaves dirty pagecache backed by holes, which writeback quietly
skips, thus leaving clean, non-zeroed pagecache over holes in the
file. To verify, fiemap shows holes in the first 32k of the file and
reads return different data across a remount:
$ xfs_io -c "fiemap -v" <file>
<file>:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
...
1: [8..511]: hole 504
...
$ xfs_io -c "pread -v 4k 8" <file> 00001000: cd cd cd cd cd cd cd cd ........
$ umount <mnt>; mount <dev> <mnt>
$ xfs_io -c "pread -v 4k 8" <file> 00001000: 00 00 00 00 00 00 00 00 ........
To avoid this problem, make unshare follow the same rules used for
background cowblock scanning and never purge the COW fork for inodes
with dirty pagecache or in-flight I/O.
Fixes: 46afb0628b86347 ("xfs: only flush the unshared range in xfs_reflink_unshare") Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Carlos Maiolino <[email protected]>
When CONFIG_NET_9P_USBG=y but CONFIG_USB_LIBCOMPOSITE=m and
CONFIG_CONFIGFS_FS=m, the following build error occurs:
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_free_func':
trans_usbg.c:(.text+0x124): undefined reference to `usb_free_all_descriptors'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_rx_complete':
trans_usbg.c:(.text+0x2d8): undefined reference to `usb_interface_id'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x2f6): undefined reference to `usb_string_id'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_func_bind':
trans_usbg.c:(.text+0x31c): undefined reference to `usb_ep_autoconfig'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x336): undefined reference to `usb_ep_autoconfig'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x378): undefined reference to `usb_assign_descriptors'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `f_usb9pfs_opts_buflen_store':
trans_usbg.c:(.text+0x49e): undefined reference to `usb_put_function_instance'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_alloc_instance':
trans_usbg.c:(.text+0x5fe): undefined reference to `config_group_init_type_name'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_alloc':
trans_usbg.c:(.text+0x7aa): undefined reference to `config_ep_by_speed'
riscv64-unknown-linux-gnu-ld: trans_usbg.c:(.text+0x7ea): undefined reference to `config_ep_by_speed'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_set_alt':
trans_usbg.c:(.text+0x828): undefined reference to `alloc_ep_req'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_modexit':
trans_usbg.c:(.exit.text+0x10): undefined reference to `usb_function_unregister'
riscv64-unknown-linux-gnu-ld: net/9p/trans_usbg.o: in function `usb9pfs_modinit':
trans_usbg.c:(.init.text+0x1e): undefined reference to `usb_function_register'
Matt Roper [Wed, 2 Oct 2024 23:06:21 +0000 (16:06 -0700)]
drm/xe: Make wedged_mode debugfs writable
The intent of this debugfs entry is to allow modification of wedging
behavior, either from IGT tests or during manual debug; it should be
marked as writable to properly reflect this. In practice this hasn't
caused a problem because we always access wedged_mode as root, which
ignores file permissions, but it's still misleading to have the entry
incorrectly marked as RO.
Matthew Auld [Tue, 1 Oct 2024 08:43:47 +0000 (09:43 +0100)]
drm/xe/ct: prevent UAF in send_recv()
Ensure we serialize with completion side to prevent UAF with fence going
out of scope on the stack, since we have no clue if it will fire after
the timeout before we can erase from the xa. Also we have some dependent
loads and stores for which we need the correct ordering, and we lack the
needed barriers. Fix this by grabbing the ct->lock after the wait, which
is also held by the completion side.
v2 (Badal):
- Also print done after acquiring the lock and seeing timeout.
Sporadic issues, such as PHY access loss, have been observed on I219 (19)
devices. It was found that these devices have hardware more closely
related to ADP than MTP and the issues were caused by taking MTP-specific
flows.
Change the MAC and board types of these devices from MTP to ADP to
correctly reflect the LAN hardware, and flows, of these devices.
Fixes: db2d737d63c5 ("e1000e: Separate MTP board type from ADP") Signed-off-by: Vitaly Lifshits <[email protected]> Tested-by: Mor Bar-Gabay <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
igb: Do not bring the device up after non-fatal error
Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal")
changed igb_io_error_detected() to ignore non-fatal pcie errors in order
to avoid hung task that can happen when igb_down() is called multiple
times. This caused an issue when processing transient non-fatal errors.
igb_io_resume(), which is called after igb_io_error_detected(), assumes
that device is brought down by igb_io_error_detected() if the interface
is up. This resulted in panic with stacktrace below.
To fix this issue igb_io_resume() checks if the interface is running and
the device is not down this means igb_io_error_detected() did not bring
the device down and there is no need to bring it up.
Signed-off-by: Mohamed Khalfella <[email protected]> Reviewed-by: Yuanyuan Zhong <[email protected]> Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal") Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
i40e: Fix macvlan leak by synchronizing access to mac_filter_hash
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock),
ensuring atomic operations and preventing concurrent access.
Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in
i40e_add_mac_filter() to help catch similar issues in the future.
Reproduction steps:
1. Spawn VFs and configure port vlan on them.
2. Trigger concurrent macvlan operations (e.g., adding and deleting
portvlan and/or mac filters).
3. Observe the potential memory leak and inconsistent state in the
mac_filter_hash.
This synchronization ensures the integrity of the mac_filter_hash and prevents
the described leak.
selftests: vDSO: improve getrandom and chacha error messages
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
selftests: vDSO: unconditionally build getrandom test
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
selftests: vDSO: unconditionally build chacha test
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This
causes the required arrays to be reallocated taking the new queue count
into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq
before ice_vsi_rebuild(), so that realloc uses the newly set queue
count.
Additionally, ice_vsi_rebuild() does not remove VSI filters
(ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer
necessary.
Wojciech Drewek [Fri, 27 Sep 2024 12:38:01 +0000 (14:38 +0200)]
ice: Flush FDB entries before reset
Triggering the reset while in switchdev mode causes
errors[1]. Rules are already removed by this time
because switch content is flushed in case of the reset.
This means that rules were deleted from HW but SW
still thinks they exist so when we get
SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to
delete not existing rule.
We can avoid these errors by clearing the rules
early in the reset flow before they are removed from HW.
Switchdev API will get notified that the rule was removed
so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification.
Remove unnecessary ice_clear_sw_switch_recipes.
Marcin Szycik [Tue, 24 Sep 2024 10:04:24 +0000 (12:04 +0200)]
ice: Fix netif_is_ice() in Safe Mode
netif_is_ice() works by checking the pointer to netdev ops. However, it
only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops,
so in Safe Mode it always returns false, which is unintuitive. While it
doesn't look like netif_is_ice() is currently being called anywhere in Safe
Mode, this could change and potentially lead to unexpected behaviour.
projects / linux.git / log