Merge tag 'pwm/for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull maintainer entry update from Uwe Kleine-König:
"This is just an update to my maintainer entries as I will switch jobs
soon. Getting a contact email address into the MAINTAINERS file that
will work also after my switch will hopefully reduce people mailing to
the then non-existing address.
I also drop my co-maintenance for SIOX, but that continues to be in
good hands"
* tag 'pwm/for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: Update Uwe's email address, drop SIOX maintenance
Merge tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly merge request, mostly amdgpu and misc bits in
xe/etnaviv/gma500 and some core changes. Nothing too outlandish, seems
to be about normal for this time of release.
atomic-helpers:
- Fix memory leak in drm_format_conv_state_copy()
fbdev:
- fbdefio: Fix address calculation
amdgpu:
- Suspend/resume fix
- Don't expose gpu_od directory if it's empty
- SDMA 4.4.2 fix
- VPE fix
- BO eviction fix
- UMSCH fix
- SMU 13.0.6 reset fixes
- GPUVM flush accounting fix
- SDMA 5.2 fix
- Fix possible UAF in mes code
* tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
Revert "drm/etnaviv: Expose a few more chipspecs to userspace"
drm/etnaviv: fix tx clock gating on some GC7000 variants
drm/xe/guc: Fix arguments passed to relay G2H handlers
drm/xe: call free_gsc_pkt only once on action add failure
drm/xe: Remove sysfs only once on action add failure
fbdev: fix incorrect address computation in deferred IO
drm/amdgpu/mes: fix use-after-free issue
drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3
drm/amdgpu: Fix the ring buffer size for queue VM flush
drm/amdkfd: Add VRAM accounting for SVM migration
drm/amd/pm: Restore config space after reset
drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend
drm/amdkfd: Fix rescheduling of restore worker
drm/amdgpu: Update BO eviction priorities
drm/amdgpu/vpe: fix vpe dpm setup failed
drm/amdgpu: Assign correct bits for SDMA HDP flush
drm/amdgpu/pm: Remove gpu_od if it's an empty directory
drm/amdkfd: make sure VM is ready for updating operations
drm/amdgpu: Fix leak when GPU memory allocation fails
drm/amdkfd: Fix eviction fence handling
...
MAINTAINERS: Update Uwe's email address, drop SIOX maintenance
In the context of changing my career path, my Pengutronix email address
will soon stop to be available to me. Update the PWM maintainer entry to
my kernel.org identity.
I drop my co-maintenance of SIOX. Thorsten will continue to care for
it with the support of the Pengutronix kernel team.
Merge tag '9p-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fix from Eric Van Hensbergen:
"This contains a single mitigation to help deal with an apparent race
condition between client and server having to deal with inode number
collisions"
* tag '9p-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: mitigate inode collisions
Merge tag 'acpi-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three recent regressions, one introduced while enabling a
new platform firmware feature for power management, and two introduced
by a recent CPPC library update.
Specifics:
- Allow two overlapping Low-Power S0 Idle _DSM function sets to be
used at the same time (Rafael Wysocki)
- Fix bit offset computation in MASK_VAL() macro used for applying a
bitmask to a new CPPC register value (Jarred White)
- Fix access width field usage for PCC registers in CPPC (Vanshidhar
Konda)"
* tag 'acpi-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functions
ACPI: CPPC: Fix access width used for PCC registers
ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macro
Merge tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Nothing major, regression fixes are mostly in drivers, two more of
those are flowing towards us thru various trees. I wish some of the
changes went into -rc5, we'll try to keep an eye on frequency of PRs
from sub-trees.
Also disproportional number of fixes for bugs added in v6.4, strange
coincidence.
Current release - regressions:
- igc: fix LED-related deadlock on driver unbind
- wifi: mac80211: small fixes to recent clean up of the connection
process
- Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices", kernel
doesn't have all the code to deal with that version, yet
- Bluetooth:
- set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- qca: fix invalid device address check, again
- Bluetooth:
- lots of fixes for the command submission rework from v6.4
- qca: fix NULL-deref on non-serdev suspend
Misc:
- tools: ynl: don't ignore errors in NLMSG_DONE messages"
* tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().
net: b44: set pause params only when interface is up
tls: fix lockless read of strp->msg_ready in ->poll
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
net: ravb: Fix registered interrupt names
octeontx2-af: fix the double free in rvu_npc_freemem()
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
ice: fix LAG and VF lock dependency in ice_reset_vf()
iavf: Fix TC config comparison with existing adapter TC config
i40e: Report MFS in decimal base instead of hex
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
ethernet: Add helper for assigning packet type when dest address does not match device address
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
net: phy: dp83869: Fix MII mode failure
netfilter: nf_tables: honor table dormant flag from netdev release event path
eth: bnxt: fix counting packets discarded due to OOM and netpoll
igc: Fix LED-related deadlock on driver unbind
...
Merge tag 'nfsd-6.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Revert some backchannel fixes that went into v6.9-rc
* tag 'nfsd-6.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "NFSD: Convert the callback workqueue to use delayed_work"
Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"
Merge tag 'for-linus-2024042501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- A couple of i2c-hid fixes (Kenny Levinsen & Nam Cao)
- A config issue with mcp-2221 when CONFIG_IIO is not enabled
(Abdelrahman Morsy)
- A dev_err fix in intel-ish-hid (Zhang Lixu)
- A couple of mouse fixes for both nintendo and Logitech-dj (Nuno
Pereira and Yaraslau Furman)
- I'm changing my main kernel email address as it's way simpler for me
than the Red Hat one (Benjamin Tissoires)
* tag 'for-linus-2024042501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabled
HID: logitech-dj: allow mice to use all types of reports
HID: i2c-hid: Revert to await reset ACK before reading report descriptor
HID: nintendo: Fix N64 controller being identified as mouse
MAINTAINERS: update Benjamin's email address
HID: intel-ish-hid: ipc: Fix dev_err usage with uninitialized dev->devc
HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up
Jakub Kicinski [Thu, 25 Apr 2024 15:46:53 +0000 (08:46 -0700)]
Merge tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains two Netfilter/IPVS fixes for net:
Patch #1 fixes SCTP checksumming for IPVS with gso packets,
from Ismael Luceno.
Patch #2 honor dormant flag from netdev event path to fix a possible
double hook unregistration.
* tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: honor table dormant flag from netdev release event path
ipvs: Fix checksumming on GSO of SCTP packets
====================
Peter Münster [Wed, 24 Apr 2024 13:51:52 +0000 (15:51 +0200)]
net: b44: set pause params only when interface is up
b44_free_rings() accesses b44::rx_buffers (and ::tx_buffers)
unconditionally, but b44::rx_buffers is only valid when the
device is up (they get allocated in b44_open(), and deallocated
again in b44_close()), any other time these are just a NULL pointers.
So if you try to change the pause params while the network interface
is disabled/administratively down, everything explodes (which likely
netifd tries to do).
tls: fix lockless read of strp->msg_ready in ->poll
tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
In scenario where pin is registered with multiple parent pins via
dpll_pin_on_pin_register(..), all belonging to the same dpll device.
A second call to dpll_pin_on_pin_unregister(..) would cause a call trace,
as it tries to use already released registration resources (due to fix
introduced in b446631f355e). In this scenario pin was registered twice,
so resources are not yet expected to be release until each registered
pin/pin pair is unregistered.
Currently, the following crash/call trace is produced when ice driver is
removed on the system with installed E810T NIC which includes dpll device:
Fix by adding a parent pointer as a cookie when creating a registration,
also when searching for it. For the regular pins pass NULL, this allows to
create separated registration for each parent the pin is registered with.
As interrupts are now requested from ravb_probe(), before calling
register_netdev(), ndev->name still contains the template "eth%d",
leading to funny names in /proc/interrupts. E.g. on R-Car E3:
Jason Reeder [Wed, 24 Apr 2024 07:16:26 +0000 (12:46 +0530)]
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.)
field from the second nibble of the PTP header which is defined in the
PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification
the first two bytes of the PTP header are defined as the versionType
which is always 0x0001. This means that any PTPv1 packets that are
tagged for TX timestamping by the CPTS will have their messageType set
to 0x0 which corresponds to a Sync message type. This causes issues
when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1)
timestamp that never appears.
Fix this by checking if the ptp_class of the timestamped TX packet is
PTP_CLASS_V1 and then matching the PTP sequence ID to the stored
sequence ID in the skb->cb data structure. If the sequence IDs match
and the packet is of type PTPv1 then there is a chance that the
messageType has been incorrectly stored by the CPTS so overwrite the
messageType stored by the CPTS with the messageType from the skb->cb
data structure. This allows the PTPv1 stack to receive TX timestamps
for Delay_Req packets which are necessary to lock onto a PTP Leader.
====================
Fix isolation of broadcast traffic and unmatched unicast traffic with MACsec offload
Some device drivers support devices that enable them to annotate whether a
Rx skb refers to a packet that was processed by the MACsec offloading
functionality of the device. Logic in the Rx handling for MACsec offload
does not utilize this information to preemptively avoid forwarding to the
macsec netdev currently. Because of this, things like multicast messages or
unicast messages with an unmatched destination address such as ARP requests
are forwarded to the macsec netdev whether the message received was MACsec
encrypted or not. The goal of this patch series is to improve the Rx
handling for MACsec offload for devices capable of annotating skbs received
that were decrypted by the NIC offload for MACsec.
Here is a summary of the issue that occurs with the existing logic today.
* The current design of the MACsec offload handling path tries to use
"best guess" mechanisms for determining whether a packet associated
with the currently handled skb in the datapath was processed via HW
offload
* The best guess mechanism uses the following heuristic logic (in order of
precedence)
- Check if header destination MAC address matches MACsec netdev MAC
address -> forward to MACsec port
- Check if packet is multicast traffic -> forward to MACsec port
- MACsec security channel was able to be looked up from skb offload
context (mlx5 only) -> forward to MACsec port
* Problem: plaintext traffic can potentially solicit a MACsec encrypted
response from the offload device
- Core aspect of MACsec is that it identifies unauthorized LAN connections
and excludes them from communication
+ This behavior can be seen when not enabling offload for MACsec
- The offload behavior violates this principle in MACsec
I believe this behavior is a security bug since applications utilizing
MACsec could be exploited using this behavior, and the correct way to
resolve this is by having the hardware correctly indicate whether MACsec
offload occurred for the packet or not. In the patches in this series, I
leave a warning for when the problematic path occurs because I cannot
figure out a secure way to fix the security issue that applies to the core
MACsec offload handling in the Rx path without breaking MACsec offload for
other vendors.
Shown at the bottom is an example use case where plaintext traffic sent to
a physical port of a NIC configured for MACsec offload is unable to be
handled correctly by the software stack when the NIC provides awareness to
the kernel about whether the received packet is MACsec traffic or not. In
this specific example, plaintext ARP requests are being responded with
MACsec encrypted ARP replies (which leads to routing information being
unable to be built for the requester).
Side 1
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.1/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 1 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:66
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip macsec add macsec0 rx sci 2 on
ip macsec add macsec0 rx sci 2 sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip address flush macsec0
ip address add 2.2.2.1/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:88
ip address flush macsec_vlan
ip address add 3.3.3.1/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 2
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.2/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 2 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:77
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip macsec add macsec0 rx sci 1 on
ip macsec add macsec0 rx sci 1 sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip address flush macsec0
ip address add 2.2.2.2/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:99
ip address flush macsec_vlan
ip address add 3.3.3.2/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 1
ping -I mlx5_1 1.1.1.2
PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 mlx5_1: 56(84) bytes of data.
From 1.1.1.1 icmp_seq=1 Destination Host Unreachable
ping: sendmsg: No route to host
From 1.1.1.1 icmp_seq=2 Destination Host Unreachable
From 1.1.1.1 icmp_seq=3 Destination Host Unreachable
Changes:
v2->v3:
* Made dev paramater const for eth_skb_pkt_type helper as suggested by Sabrina
Dubroca <[email protected]>
v1->v2:
* Fixed series subject to detail the issue being fixed
* Removed strange characters from cover letter
* Added comment in example that illustrates the impact involving
promiscuous mode
* Added patch for generalizing packet type detection
* Added Fixes: tags and targeting net
* Removed pointless warning in the heuristic Rx path for macsec offload
* Applied small refactor in Rx path offload to minimize scope of rx_sc
local variable
Jacob Keller [Tue, 23 Apr 2024 18:27:20 +0000 (11:27 -0700)]
ice: fix LAG and VF lock dependency in ice_reset_vf()
9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over
aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf().
The commit placed this lock acquisition just prior to the acquisition of
the VF configuration lock.
If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK
flag, this could deadlock with ice_vc_cfg_qs_msg() because it always
acquires the locks in the order of the VF configuration lock and then the
LAG mutex.
Lockdep reports this violation almost immediately on creating and then
removing 2 VF:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-rc6 #54 Tainted: G W O
------------------------------------------------------
kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice]
but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
To avoid deadlock, we must acquire the LAG mutex only after acquiring the
VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only
after we either acquire or check that the VF configuration lock is held.
iavf: Fix TC config comparison with existing adapter TC config
Same number of TCs doesn't imply that underlying TC configs are
same. The config could be different due to difference in number
of queues in each TC. Add utility function to determine if TC
configs are same.
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
Issue reported by customer during SRIOV testing, call trace:
When both i40e and the i40iw driver are loaded, a warning
in check_flush_dependency is being triggered. This seems
to be because of the i40e driver workqueue is allocated with
the WQ_MEM_RECLAIM flag, and the i40iw one is not.
Similar error was encountered on ice too and it was fixed by
removing the flag. Do the same for i40e too.
Dan Carpenter [Tue, 23 Apr 2024 16:15:22 +0000 (19:15 +0300)]
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
The rx_chn->irq[] array is unsigned int but it should be signed for the
error handling to work. Also if k3_udma_glue_rx_get_irq() returns zero
then we should return -ENXIO instead of success.
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
mlx5 Rx flow steering and CQE handling enable the driver to be able to
update an skb's md_dst attribute as MACsec when MACsec traffic arrives when
a device is configured for offloading. Advertise this to the core stack to
take advantage of this capability.
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
Can now correctly identify where the packets should be delivered by using
md_dst or its absence on devices that provide it.
This detection is not possible without device drivers that update md_dst. A
fallback pattern should be used for supporting such device drivers. This
fallback mode causes multicast messages to be cloned to both the non-macsec
and macsec ports, independent of whether the multicast message received was
encrypted over MACsec or not. Other non-macsec traffic may also fail to be
handled correctly for devices in promiscuous mode.
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
Cannot know whether a Rx skb missing md_dst is intended for MACsec or not
without knowing whether the device is able to update this field during an
offload. Assume that an offload to a MACsec device cannot support updating
md_dst by default. Capable devices can advertise that they do indicate that
an skb is related to a MACsec offloaded packet using the md_dst.
Derek Foreman [Mon, 18 Mar 2024 12:32:07 +0000 (07:32 -0500)]
drm/etnaviv: fix tx clock gating on some GC7000 variants
commit 4bce244272513 ("drm/etnaviv: disable tx clock gating for GC7000
rev6203") accidentally applied the fix for i.MX8MN errata ERR050226 to
GC2000 instead of GC7000, failing to disable tx clock gating for GC7000
rev 0x6023 as intended.
Additional clean-up further propagated this issue, partially breaking
the clock gating fixes added for GC7000 rev 6202 in commit 432f51e7deeda
("drm/etnaviv: add clock gating workaround for GC7000 r6202").
David S. Miller [Thu, 25 Apr 2024 11:18:37 +0000 (12:18 +0100)]
Merge tag 'wireless-2024-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Fixes for the current cycle:
* ath11k: convert to correct RCU iteration of IPv6 addresses
* iwlwifi: link ID, FW API version, scanning and PASN fixes
* cfg80211: NULL-deref and tracing fixes
* mac80211: connection mode, mesh fast-TX, multi-link and
various other small fixes
====================
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode)
only if the op-mode is either DP83869_100M_MEDIA_CONVERT or
DP83869_RGMII_100_BASE.
Some drivers i.e. ICSSG support MII mode with op-mode as
DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869
driver. As a result MII mode on ICSSG doesn't work and below log is seen.
TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode
icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0
icssg-prueth icssg1-eth: can't phy connect port MII0
Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as
well.
Fixes: 94e86ef1b801 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used") Signed-off-by: MD Danish Anwar <[email protected]> Reviewed-by: Ravi Gunasekaran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jakub Kicinski [Thu, 25 Apr 2024 03:29:49 +0000 (20:29 -0700)]
Merge tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
- qca: fix invalid device address check
- hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
- Fix type of len in {l2cap,sco}_sock_getsockopt_old()
- btusb: mediatek: Fix double free of skb in coredump
- btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
- btusb: Fix triggering coredump implementation for QCA
* tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
Bluetooth: qca: fix NULL-deref on non-serdev setup
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Bluetooth: btusb: mediatek: Fix double free of skb in coredump
Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID
Bluetooth: qca: fix invalid device address check
Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE
Bluetooth: btusb: Fix triggering coredump implementation for QCA
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
====================
Jakub Kicinski [Wed, 24 Apr 2024 00:21:48 +0000 (17:21 -0700)]
eth: bnxt: fix counting packets discarded due to OOM and netpoll
I added OOM and netpoll discard counters, naively assuming that
the cpr pointer is pointing to a common completion ring.
Turns out that is usually *a* completion ring but not *the*
completion ring which bnapi->cp_ring points to. bnapi->cp_ring
is where the stats are read from, so we end up reporting 0
thru ethtool -S and qstat even though the drop events have happened.
Make 100% sure we're recording statistics in the correct structure.
Roman reports a deadlock on unplug of a Thunderbolt docking station
containing an Intel I225 Ethernet adapter.
The root cause is that led_classdev's for LEDs on the adapter are
registered such that they're device-managed by the netdev. That
results in recursive acquisition of the rtnl_lock() mutex on unplug:
When the driver calls unregister_netdev(), it acquires rtnl_lock(),
then frees the device-managed resources. Upon unregistering the LEDs,
netdev_trig_deactivate() invokes unregister_netdevice_notifier(),
which tries to acquire rtnl_lock() again.
Avoid by using non-device-managed LED registration.
This reverts commit e30cef001da259e8df354b813015d0e5acc08740.
commit 99f4570cfba1 ("clkdev: Update clkdev id usage to allow
for longer names") can fix clk_name exceed MAX_DEV_ID limits,
so this commit is meaningless.
Revert "net: txgbe: fix i2c dev name cannot match clkdev"
This reverts commit c644920ce9220d83e070f575a4df711741c07f07.
when register i2c dev, txgbe shorten "i2c_designware" to "i2c_dw",
will cause this i2c dev can't match platfom driver i2c_designware_platform.
mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash work
The rehash delayed work is rescheduled with a delay if the number of
credits at end of the work is not negative as supposedly it means that
the migration ended. Otherwise, it is rescheduled immediately.
After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during
rehash" the above is no longer accurate as a non-negative number of
credits is no longer indicative of the migration being done. It can also
happen if the work encountered an error in which case the migration will
resume the next time the work is scheduled.
The significance of the above is that it is possible for the work to be
pending and associated with hints that were allocated when the migration
started. This leads to the hints being leaked [1] when the work is
canceled while pending as part of ACL region dismantle.
Fix by freeing the hints if hints are associated with a work that was
canceled while pending.
Blame the original commit since the reliance on not having a pending
work associated with hints is fragile.
mlxsw: spectrum_acl_tcam: Fix incorrect list API usage
Both the function that migrates all the chunks within a region and the
function that migrates all the entries within a chunk call
list_first_entry() on the respective lists without checking that the
lists are not empty. This is incorrect usage of the API, which leads to
the following warning [1].
Fix by returning if the lists are empty as there is nothing to migrate
in this case.
mlxsw: spectrum_acl_tcam: Fix warning during rehash
As previously explained, the rehash delayed work migrates filters from
one region to another. This is done by iterating over all chunks (all
the filters with the same priority) in the region and in each chunk
iterating over all the filters.
When the work runs out of credits it stores the current chunk and entry
as markers in the per-work context so that it would know where to resume
the migration from the next time the work is scheduled.
Upon error, the chunk marker is reset to NULL, but without resetting the
entry markers despite being relative to it. This can result in migration
being resumed from an entry that does not belong to the chunk being
migrated. In turn, this will eventually lead to a chunk being iterated
over as if it is an entry. Because of how the two structures happen to
be defined, this does not lead to KASAN splats, but to warnings such as
[1].
Fix by creating a helper that resets all the markers and call it from
all the places the currently only reset the chunk marker. For good
measures also call it when starting a completely new rehash. Add a
warning to avoid future cases.
mlxsw: spectrum_acl_tcam: Fix memory leak during rehash
The rehash delayed work migrates filters from one region to another.
This is done by iterating over all chunks (all the filters with the same
priority) in the region and in each chunk iterating over all the
filters.
If the migration fails, the code tries to migrate the filters back to
the old region. However, the rollback itself can also fail in which case
another migration will be erroneously performed. Besides the fact that
this ping pong is not a very good idea, it also creates a problem.
Each virtual chunk references two chunks: The currently used one
('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the
first holds the chunk we want to migrate filters to and the second holds
the chunk we are migrating filters from.
The code currently assumes - but does not verify - that the backup chunk
does not exist (NULL) if the currently used chunk does not reference the
target region. This assumption breaks when we are trying to rollback a
rollback, resulting in the backup chunk being overwritten and leaked
[1].
Fix by not rolling back a failed rollback and add a warning to avoid
future cases.
In the rare cases when the device resources are exhausted it is likely
that the rehash delayed work will fail. An error message will be printed
whenever this happens which can be overwhelming considering the fact
that the work is per-region and that there can be hundreds of regions.
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash
The rehash delayed work migrates filters from one region to another
according to the number of available credits.
The migrated from region is destroyed at the end of the work if the
number of credits is non-negative as the assumption is that this is
indicative of migration being complete. This assumption is incorrect as
a non-negative number of credits can also be the result of a failed
migration.
The destruction of a region that still has filters referencing it can
result in a use-after-free [1].
Fix by not destroying the region if migration failed.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230
Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update
The rule activity update delayed work periodically traverses the list of
configured rules and queries their activity from the device.
As part of this task it accesses the entry pointed by 'ventry->entry',
but this entry can be changed concurrently by the rehash delayed work,
leading to a use-after-free [1].
Fix by closing the race and perform the activity query under the
'vregion->lock' mutex.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140
Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181
mlxsw: spectrum_acl_tcam: Fix race during rehash delayed work
The purpose of the rehash delayed work is to reduce the number of masks
(eRPs) used by an ACL region as the eRP bank is a global and limited
resource.
This is done in three steps:
1. Creating a new set of masks and a new ACL region which will use the
new masks and to which the existing filters will be migrated to. The
new region is assigned to 'vregion->region' and the region from which
the filters are migrated from is assigned to 'vregion->region2'.
2. Migrating all the filters from the old region to the new region.
3. Destroying the old region and setting 'vregion->region2' to NULL.
Only the second steps is performed under the 'vregion->lock' mutex
although its comments says that among other things it "Protects
consistency of region, region2 pointers".
This is problematic as the first step can race with filter insertion
from user space that uses 'vregion->region', but under the mutex.
Fix by holding the mutex across the entirety of the delayed work and not
only during the second step.
mlxsw: spectrum_acl_tcam: Fix race in region ID allocation
Region identifiers can be allocated both when user space tries to insert
a new tc filter and when filters are migrated from one region to another
as part of the rehash delayed work.
There is no lock protecting the bitmap from which these identifiers are
allocated from, which is racy and leads to bad parameter errors from the
device's firmware.
Fix by converting the bitmap to IDA which handles its own locking. For
consistency, do the same for the group identifiers that are part of the
same structure.
Hyunwoo Kim [Mon, 22 Apr 2024 09:37:17 +0000 (05:37 -0400)]
net: openvswitch: Fix Use-After-Free in ovs_ct_exit
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal
of ovs_ct_limit_exit, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
It was observed in the wild that pairs of consecutive packets would leave
the IPVS with the same wrong checksum, and the issue only went away when
disabling GSO.
IPVS needs to avoid computing the SCTP checksum when using GSO.
Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
Any return value from gpiod_get_optional() other than a pointer to a
GPIO descriptor or a NULL-pointer is an error and the driver should
abort probing. That being said: commit 56d074d26c58 ("Bluetooth: hci_qca:
don't use IS_ERR_OR_NULL() with gpiod_get_optional()") no longer sets
power_ctrl_enabled on NULL-pointer returned by
devm_gpiod_get_optional(). Restore this behavior but bail-out on errors.
While at it: also bail-out on error returned when trying to get the
"swctrl" GPIO.
Chun-Yi Lee [Wed, 24 Apr 2024 13:59:03 +0000 (21:59 +0800)]
Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
Since the d883a4669a1de be introduced in v6.4, bluetooth daemon
got the following failed message of MGMT_OP_REMOVE_ADV_MONITOR
command when controller is power-off:
bluetoothd[20976]:
src/adapter.c:reset_adv_monitors_complete() Failed to reset Adv
Monitors: Failed>
Normally this situation is happened when the bluetoothd deamon
be started manually after system booting. Which means that
bluetoothd received MGMT_EV_INDEX_ADDED event after kernel
runs hci_power_off().
Base on doc/mgmt-api.txt, the MGMT_OP_REMOVE_ADV_MONITOR command
can be used when the controller is not powered. This patch changes
the code in remove_adv_monitor() to use hci_cmd_sync_submit()
instead of hci_cmd_sync_queue().
Johan Hovold [Mon, 22 Apr 2024 13:57:47 +0000 (15:57 +0200)]
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Qualcomm ROME controllers can be registered from the Bluetooth line
discipline and in this case the HCI UART serdev pointer is NULL.
Add the missing sanity check to prevent a NULL-pointer dereference when
wakeup() is called for a non-serdev controller during suspend.
Just return true for now to restore the original behaviour and address
the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657
("Bluetooth: hci_qca: only assign wakeup with serial port support") that
causes the crash to happen already at setup() time.
Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support") Cc: [email protected] # 5.13 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID
These commands don't require the adapter to be up and running so don't
use hci_cmd_sync_queue which would check that flag, instead use
hci_cmd_sync_submit which would ensure mgmt_class_complete is set
properly regardless if any command was actually run or not.
Johan Hovold [Tue, 16 Apr 2024 09:15:09 +0000 (11:15 +0200)]
Bluetooth: qca: fix invalid device address check
Qualcomm Bluetooth controllers may not have been provisioned with a
valid device address and instead end up using the default address
00:00:00:00:5a:ad.
This was previously believed to be due to lack of persistent storage for
the address but it may also be due to integrators opting to not use the
on-chip OTP memory and instead store the address elsewhere (e.g. in
storage managed by secure world firmware).
According to Qualcomm, at least WCN6750, WCN6855 and WCN7850 have
on-chip OTP storage for the address.
As the device type alone cannot be used to determine when the address is
valid, instead read back the address during setup() and only set the
HCI_QUIRK_USE_BDADDR_PROPERTY flag when needed.
This specifically makes sure that controllers that have been provisioned
with an address do not start as unconfigured.
Zijun Hu [Mon, 25 Mar 2024 08:11:49 +0000 (16:11 +0800)]
Bluetooth: btusb: Fix triggering coredump implementation for QCA
btusb_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific
command to trigger firmware coredump, but the command does not
have any event as its sync response, so it is not suitable to use
__hci_cmd_sync(), fixed by using __hci_cmd_send().
Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: Zijun Hu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
WangYuli [Fri, 29 Mar 2024 02:34:39 +0000 (10:34 +0800)]
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
Add the support ID(0x0bda, 0x4853) to usb_device_id table for
Realtek RTL8852BE.
Without this change the device utilizes an obsolete version of
the firmware that is encoded in it rather than the updated Realtek
firmware and config files from the firmware directory. The latter
files implement many new features.
Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.
Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default") Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to
build due to the checks in check_copy_size():
In file included from net/bluetooth/sco.c:27:
In file included from include/linux/module.h:13:
In file included from include/linux/stat.h:19:
In file included from include/linux/time.h:60:
In file included from include/linux/time32.h:13:
In file included from include/linux/timex.h:67:
In file included from arch/x86/include/asm/timex.h:6:
In file included from arch/x86/include/asm/tsc.h:10:
In file included from arch/x86/include/asm/msr.h:15:
In file included from include/linux/percpu.h:7:
In file included from include/linux/smp.h:118:
include/linux/thread_info.h:244:4: error: call to '__bad_copy_from'
declared with 'error' attribute: copy source size is too small
244 | __bad_copy_from();
| ^
The same exact error occurs in l2cap_sock.c. The copy_to_user()
statements that are failing come from l2cap_sock_getsockopt_old() and
sco_sock_getsockopt_old(). This does not occur with GCC with or without
KCSAN or Clang without KCSAN enabled.
len is defined as an 'int' because it is assigned from
'__user int *optlen'. However, it is clamped against the result of
sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
platforms). This is done with min_t() because min() requires compatible
types, which results in both len and the result of sizeof() being casted
to 'unsigned int', meaning len changes signs and the result of sizeof()
is truncated. From there, len is passed to copy_to_user(), which has a
third parameter type of 'unsigned long', so it is widened and changes
signs again. This excessive casting in combination with the KCSAN
instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
call, failing the build.
The official recommendation from LLVM developers is to consistently use
long types for all size variables to avoid the unnecessary casting in
the first place. Change the type of len to size_t in both
l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears
up the error while allowing min_t() to be replaced with min(), resulting
in simpler code with no casts and fewer implicit conversions. While len
is a different type than optlen now, it should result in no functional
change because the result of sizeof() will clamp all values of optlen in
the same manner as before.
Merge tag 'for-6.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix information leak by the buffer returned from LOGICAL_INO ioctl
- fix flipped condition in scrub when tracking sectors in zoned mode
- fix calculation when dropping extent range
- reinstate fallback to write uncompressed data in case of fragmented
space that could not store the entire compressed chunk
- minor fix to message formatting style to make it conforming to the
commonly used style
* tag 'for-6.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix wrong block_start calculation for btrfs_drop_extent_map_range()
btrfs: fix information leak in btrfs_ioctl_logical_to_ino()
btrfs: fallback if compressed IO fails for ENOSPC
btrfs: scrub: run relocation repair when/only needed
btrfs: remove colon from messages with state
Michal Wajdeczko [Fri, 19 Apr 2024 15:03:51 +0000 (17:03 +0200)]
drm/xe/guc: Fix arguments passed to relay G2H handlers
By default CT code was passing just payload of the G2H event
message, while Relay code expects full G2H message including
HXG header which contains DATA0 field. Fix that.
drm/xe: call free_gsc_pkt only once on action add failure
The drmm_add_action_or_reset function automatically invokes the
action (free_gsc_pkt) in the event of a failure; therefore, there's no
necessity to call it within the return check.
drm/xe: Remove sysfs only once on action add failure
The drmm_add_action_or_reset function automatically invokes the action
(sysfs removal) in the event of a failure; therefore, there's no
necessity to call it within the return check.
Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the
caller to pass errors up the call chain. Should sysfs creation or
drmm_add_action_or_reset fail, error propagation will prompt a driver
load abort.
-v2
Edit commit message (Nikula/Lucas)
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Nam Cao [Tue, 23 Apr 2024 11:50:53 +0000 (13:50 +0200)]
fbdev: fix incorrect address computation in deferred IO
With deferred IO enabled, a page fault happens when data is written to the
framebuffer device. Then driver determines which page is being updated by
calculating the offset of the written virtual address within the virtual
memory area, and uses this offset to get the updated page within the
internal buffer. This page is later copied to hardware (thus the name
"deferred IO").
This offset calculation is only correct if the virtual memory area is
mapped to the beginning of the internal buffer. Otherwise this is wrong.
For example, if users do:
mmap(ptr, 4096, PROT_WRITE, MAP_FIXED | MAP_SHARED, fd, 0xff000);
Then the virtual memory area will mapped at offset 0xff000 within the
internal buffer. This offset 0xff000 is not accounted for, and wrong page
is updated.
Correct the calculation by using vmf->pgoff instead. With this change, the
variable "offset" will no longer hold the exact offset value, but it is
rounded down to multiples of PAGE_SIZE. But this is still correct, because
this variable is only used to calculate the page offset.
Daniel Golle [Sun, 21 Apr 2024 00:08:31 +0000 (01:08 +0100)]
net: phy: mediatek-ge-soc: follow netdev LED trigger semantics
Only blink if the link is up on a LED which is programmed to also
indicate link-status.
Otherwise, if both LEDs are in use to indicate different speeds, the
resulting blinking being inverted on LEDs which aren't switched on at
a specific speed is quite counter-intuitive.
Also make sure that state left behind by reset or the bootloader is
recognized correctly including the half-duplex and full-duplex bits as
well as the (unsupported by Linux netdev trigger semantics) link-down
bit.
Fixes: c66937b0f8db ("net: phy: mediatek-ge-soc: support PHY LEDs") Signed-off-by: Daniel Golle <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Hyunwoo Kim [Mon, 22 Apr 2024 09:39:30 +0000 (05:39 -0400)]
net: gtp: Fix Use-After-Free in gtp_dellink
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal
of gtp_dellink, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 94dc550a5062 ("gtp: fix an use-after-free in ipv4_pdp_find()") Signed-off-by: Hyunwoo Kim <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Prike Liang [Mon, 25 Mar 2024 07:33:34 +0000 (15:33 +0800)]
drm/amdgpu: Fix the ring buffer size for queue VM flush
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Lang Yu [Fri, 19 Apr 2024 07:40:08 +0000 (15:40 +0800)]
drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend
umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Felix Kuehling [Thu, 18 Apr 2024 17:56:42 +0000 (13:56 -0400)]
drm/amdgpu: Update BO eviction priorities
Make SVM BOs more likely to get evicted than other BOs. These BOs
opportunistically use available VRAM, but can fall back relatively
seamlessly to system memory. It also avoids SVM migrations evicting
other, more important BOs as they will evict other SVM allocations
first.
Lang Yu [Sun, 7 Apr 2024 04:36:00 +0000 (12:36 +0800)]
drm/amdkfd: make sure VM is ready for updating operations
When page table BOs were evicted but not validated before
updating page tables, VM is still in evicting state,
amdgpu_vm_update_range returns -EBUSY and
restore_process_worker runs into a dead loop.
v2: Split the BO validation and page table update into two
separate loops in amdgpu_amdkfd_restore_process_bos. (Felix)
1.Validate BOs
2.Validate VM (and DMABuf attachments)
3.Update page tables for the BOs validated above
Hyunwoo Kim [Mon, 22 Apr 2024 09:33:40 +0000 (05:33 -0400)]
tcp: Fix Use-After-Free in tcp_ao_connect_init
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal
of tcp_ao_connect_init, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Eric Dumazet [Sun, 21 Apr 2024 19:38:28 +0000 (19:38 +0000)]
net: usb: ax88179_178a: stop lying about skb->truesize
Some usb drivers try to set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize overide.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path")
Eric Dumazet [Sun, 21 Apr 2024 17:52:48 +0000 (17:52 +0000)]
net: fix sk_memory_allocated_{add|sub} vs softirqs
Jonathan Heathcote reported a regression caused by blamed commit
on aarch64 architecture.
x86 happens to have irq-safe __this_cpu_add_return()
and __this_cpu_sub(), but this is not generic.
I think my confusion came from "struct sock" argument,
because these helpers are called with a locked socket.
But the memory accounting is per-proto (and per-cpu after
the blamed commit). We might cleanup these helpers later
to directly accept a "struct proto *proto" argument.
Switch to this_cpu_add_return() and this_cpu_xchg()
operations, and get rid of preempt_disable()/preempt_enable() pairs.
Fast path becomes a bit faster as a result :)
Many thanks to Jonathan Heathcote for his awesome report and
investigations.
Chuck Lever [Tue, 23 Apr 2024 21:52:24 +0000 (17:52 -0400)]
Revert "NFSD: Convert the callback workqueue to use delayed_work"
This commit was a pre-requisite for commit c1ccfcf1a9bf ("NFSD:
Reschedule CB operations when backchannel rpc_clnt is shut down"),
which has already been reverted.
Chuck Lever [Tue, 23 Apr 2024 21:48:43 +0000 (17:48 -0400)]
Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"
The reverted commit attempted to enable NFSD to retransmit pending
callback operations if an NFS client disconnects, but
unintentionally introduces a hazardous behavior regression if the
client becomes permanently unreachable while callback operations are
still pending.
A disconnect can occur due to network partition or if the NFS server
needs to force the NFS client to retransmit (for example, if a GSS
window under-run occurs).
Reverting the commit will make NFSD behave the same as it did in
v6.8 and before. Pending callback operations are permanently lost if
the client connection is terminated before the client receives them.
For some callback operations, this loss is not harmful.
However, for CB_RECALL, the loss means a delegation might be revoked
unnecessarily. For CB_OFFLOAD, pending COPY operations will never
complete unless the NFS client subsequently sends an OFFLOAD_STATUS
operation, which the Linux NFS client does not currently implement.
ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functions
Commit 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750 Reported-and-tested-by: Mark Pearson <[email protected]> Suggested-by: Mario Limonciello <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Mario Limonciello <[email protected]>
Merge tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fscache fix
- fix for case where we could use uninitialized lease
- add tracepoint for debugging refcounting of tcon
- fix mount option regression (e.g. forceuid vs. noforceuid when uid=
specified) caused by conversion to the new mount API
* tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reinstate original behavior again for forceuid/forcegid
smb: client: fix rename(2) regression against samba
cifs: Add tracing for the cifs_tcon struct refcounting
cifs: Fix reacquisition of volume cookie on still-live connection
Jakub Kicinski [Sat, 20 Apr 2024 02:08:26 +0000 (19:08 -0700)]
tools: ynl: don't ignore errors in NLMSG_DONE messages
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:
Merge tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, most also for stable:
- rename fix
- two fixes for potential out of bounds
- fix for connections from MacOS (padding in close response)
- fix for when to enable persistent handles"
* tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add continuous availability share parameter
ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
projects / linux.git / log