x86/boot/64: Fix crash if kernel image crosses page table boundary
A kernel which boots in 5-level paging mode crashes in a small percentage
of cases if KASLR is enabled.
This issue was tracked down to the case when the kernel image unpacks in a
way that it crosses an 1G boundary. The crash is caused by an overrun of
the PMD page table in __startup_64() and corruption of P4D page table
allocated next to it. This particular issue is not visible with 4-level
paging as P4D page tables are not used.
But the P4D and the PUD calculation have similar problems.
The PMD index calculation is wrong due to operator precedence, which fails
to confine the PMDs in the PMD array on wrap around.
The P4D calculation for 5-level paging and the PUD calculation calculate
the first index correctly, but then blindly increment it which causes the
same issue when a kernel image is located across a 512G and for 5-level
paging across a 46T boundary.
This wrap around mishandling was introduced when these parts moved from
assembly to C.
ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
In commit 19e4e768064a8 ("ipv4: Fix raw socket lookup for local
traffic"), the dif argument to __raw_v4_lookup() is coming from the
returned value of inet_iif() but the change was done only for the first
lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex.
Fixes: 19e4e768064a8 ("ipv4: Fix raw socket lookup for local traffic") Signed-off-by: Stephen Suryaputra <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jerome Marchand [Wed, 12 Jun 2019 16:22:26 +0000 (18:22 +0200)]
dm table: don't copy from a NULL pointer in realloc_argv()
For the first call to realloc_argv() in dm_split_args(), old_argv is
NULL and size is zero. Then memcpy is called, with the NULL old_argv
as the source argument and a zero size argument. AFAIK, this is
undefined behavior and generates the following warning when compiled
with UBSAN on ppc64le:
In file included from ./arch/powerpc/include/asm/paca.h:19,
from ./arch/powerpc/include/asm/current.h:16,
from ./include/linux/sched.h:12,
from ./include/linux/kthread.h:6,
from drivers/md/dm-core.h:12,
from drivers/md/dm-table.c:8:
In function 'memcpy',
inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3,
inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9:
./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull]
return __builtin_memcpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/dm-table.c: In function 'dm_split_args':
./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy'
zhangyi (F) [Wed, 5 Jun 2019 13:27:08 +0000 (21:27 +0800)]
dm log writes: make sure super sector log updates are written in order
Currently, although we submit super bios in order (and super.nr_entries
is incremented by each logged entry), submit_bio() is async so each
super sector may not be written to log device in order and then the
final nr_entries may be smaller than it should be.
This problem can be reproduced by the xfstests generic/455 with ext4:
QA output created by 455
-Silence is golden
+mark 'end' does not exist
Fix this by serializing submission of super sectors to make sure each
is written to the log disk in order.
Stephen Boyd [Wed, 5 Jun 2019 01:27:29 +0000 (18:27 -0700)]
dm init: remove trailing newline from calls to DMERR() and DMINFO()
These printing macros already add a trailing newline, so having another
one here just makes for blank lines when these prints are enabled.
Remove these needless newlines.
Fixes: 6bbc923dfcf5 ("dm: add support to directly boot to a mapped device") Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
Paolo Valente [Sat, 22 Jun 2019 20:44:16 +0000 (22:44 +0200)]
block, bfq: fix operator in BFQQ_TOTALLY_SEEKY
By mistake, there is a '&' instead of a '==' in the definition of the
macro BFQQ_TOTALLY_SEEKY. This commit replaces the wrong operator with
the correct one.
Fixes: 7074f076ff15 ("block, bfq: do not tag totally seeky queues as soft rt") Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins
is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0],
OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to
facilitate the register offset calculation and use it where necessary.
pinctrl: ocelot: fix gpio direction for pins after 31
The third argument passed to REG is not the correct one and
ocelot_gpio_set_direction is not working for pins after 31. Fix that by
passing the pin number instead of the modulo 32 value.
Phil Reid [Thu, 13 Jun 2019 04:10:23 +0000 (12:10 +0800)]
pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order
Currently probing of the mcp23s08 results in an error message
"detected irqchip that is shared with multiple gpiochips:
please fix the driver"
This is due to the following:
Call to mcp23s08_irqchip_setup() with call hierarchy:
mcp23s08_irqchip_setup()
gpiochip_irqchip_add_nested()
gpiochip_irqchip_add_key()
gpiochip_set_irq_hooks()
Call to devm_gpiochip_add_data() with call hierarchy:
devm_gpiochip_add_data()
gpiochip_add_data_with_key()
gpiochip_add_irqchip()
gpiochip_set_irq_hooks()
The gpiochip_add_irqchip() returns immediately if there isn't a irqchip
but we added a irqchip due to the previous mcp23s08_irqchip_setup()
call. So it calls gpiochip_set_irq_hooks() a second time.
Fix this by moving the call to devm_gpiochip_add_data before
the call to mcp23s08_irqchip_setup
Olof Johansson [Tue, 25 Jun 2019 11:20:08 +0000 (04:20 -0700)]
Merge tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.2, round 3:
- A recent testing by Sébastien discovers that the PWM interrupts of
i.MX6UL were wrongly coded in device tree. It's a fix for it.
* tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6ul: fix PWM[1-4] interrupts
Olof Johansson [Tue, 25 Jun 2019 11:19:26 +0000 (04:19 -0700)]
Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes
ARM: dts: Amlogic fixes for v5.2-rc
- fix GPU interrupts and operating voltage
* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: fix the operating voltage of the Mali GPU
ARM: dts: meson8b: drop undocumented property from the Mali GPU node
ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
Nicholas Piggin [Fri, 21 Jun 2019 22:55:54 +0000 (08:55 +1000)]
powerpc/64s/exception: Fix machine check early corrupting AMR
The early machine check runs in real mode, so locking is unnecessary.
Worse, the windup does not restore AMR, so this can result in a false
KUAP fault after a recoverable machine check hits inside a user copy
operation.
Fix this similarly to HMI by just avoiding the kuap lock in the
early machine check handler (it will be set by the late handler that
runs in virtual mode if that runs). If the virtual mode handler is
reached, it will lock and restore the AMR.
Fixes: 890274c2dc4c0 ("powerpc/64s: Implement KUAP for Radix MMU") Cc: Russell Currey <[email protected]> Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Linus Torvalds [Mon, 24 Jun 2019 21:52:31 +0000 (05:52 +0800)]
Merge branch 'parisc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"Add missing PCREL64 relocation in module loader to fix module load
errors when the static branch and JUMP_LABEL feature is enabled on
a 64-bit kernel"
* 'parisc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix module loading error with JUMP_LABEL feature
Linus Torvalds [Mon, 24 Jun 2019 19:41:03 +0000 (03:41 +0800)]
Merge tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd bugfix from Lee Jones.
Fix stmfx type confusion between regmap_read() (which takes an "u32")
and the bitmap operations (which take an "unsigned long" array).
* tag 'mfd-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: stmfx: Fix an endian bug in stmfx_irq_handler()
mfd: stmfx: Uninitialized variable in stmfx_irq_handler()
Kan Liang [Tue, 28 May 2019 22:08:33 +0000 (15:08 -0700)]
perf/x86: Remove pmu->pebs_no_xmm_regs
We don't need pmu->pebs_no_xmm_regs anymore, the capabilities
PERF_PMU_CAP_EXTENDED_REGS can be used to check if XMM registers
collection is supported.
The XMM registers can only be collected by PEBS hardware events on the
platforms with PEBS baseline support, e.g. Icelake, not software/probe
events.
Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU
which support extended registers. For X86, the extended registers are
XMM registers.
Add has_extended_regs() to check if extended registers are applied.
The generic code define the mask of extended registers as 0 if arch
headers haven't overridden it.
TLV_GET_DATA_LEN() may return a negtive int value, which will be
used as size_t (becoming a big unsigned long) passed into memchr,
cause this issue.
Similar to what it does in tipc_nl_compat_bearer_enable(), this
fix is to return -EINVAL when TLV_GET_DATA_LEN() is negtive in
tipc_nl_compat_bearer_disable(), as well as in
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
v1->v2:
- add the missing Fixes tags per Eric's request.
Fixes: 0762216c0ad2 ("tipc: fix uninit-value in tipc_nl_compat_bearer_enable") Fixes: 8b66fee7f8ee ("tipc: fix uninit-value in tipc_nl_compat_link_reset_stats") Reported-by: [email protected] Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Antoine Tenart [Fri, 21 Jun 2019 15:26:35 +0000 (17:26 +0200)]
net: macb: do not copy the mac address if NULL
This patch fixes the MAC address setup in the probe. The MAC address
retrieved using of_get_mac_address was checked for not containing an
error, but it may also be NULL which wasn't tested. Fix it by replacing
IS_ERR with IS_ERR_OR_NULL.
Fixes: 541ddc66d665 ("net: macb: support of_get_mac_address new ERR_PTR error") Signed-off-by: Antoine Tenart <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records")
a new path was introduced to cleanup partial records during sk_proto_close.
This path does not handle the SW KTLS tx_list cleanup.
This is unnecessary though since the free_resources calls for both
SW and offload paths will cleanup a partial record.
The visible effect is the following warning, but this bug also causes
a page double free.
Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Dmitry V. Levin [Sun, 23 Jun 2019 11:27:17 +0000 (14:27 +0300)]
fork: don't check parent_tidptr with CLONE_PIDFD
Give userspace a cheap and reliable way to tell whether CLONE_PIDFD is
supported by the kernel or not. The easiest way is to pass an invalid
file descriptor value in parent_tidptr, perform the syscall and verify
that parent_tidptr has been changed to a valid file descriptor value.
CLONE_PIDFD uses parent_tidptr to return pidfds. CLONE_PARENT_SETTID
will use parent_tidptr to return the tid of the parent. The two flags
cannot be used together. Old kernels that only support
CLONE_PARENT_SETTID will not verify the value pointed to by
parent_tidptr. This behavior is unchanged even with the introduction of
CLONE_PIDFD.
However, if CLONE_PIDFD is specified the kernel will currently check the
value pointed to by parent_tidptr before placing the pidfd in the memory
pointed to. EINVAL will be returned if the value in parent_tidptr is not
0.
If CLONE_PIDFD is supported and fd 0 is closed, then the returned pidfd
can and likely will be 0 and parent_tidptr will be unchanged. This means
userspace must either check CLONE_PIDFD support beforehand or check that
fd 0 is not closed when invoking CLONE_PIDFD.
The check for pidfd == 0 was introduced during the v5.2 merge window by
commit b3e583825266 ("clone: add CLONE_PIDFD") to ensure that
CLONE_PIDFD could be potentially extended by passing in flags through
the return argument.
However, that extension would look horrible, and with the upcoming
introduction of the clone3 syscall in v5.3 there is no need to extend
legacy clone syscall this way. (Even if it would need to be extended,
CLONE_DETACHED can be reused with CLONE_PIDFD.)
So remove the pidfd == 0 check. Userspace that needs to be portable to
kernels without CLONE_PIDFD support can then be advised to initialize
pidfd to -1 and check the pidfd value returned by CLONE_PIDFD.
Fixes: b3e583825266 ("clone: add CLONE_PIDFD") Signed-off-by: Dmitry V. Levin <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
Linus Torvalds [Mon, 24 Jun 2019 13:23:55 +0000 (21:23 +0800)]
Merge tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Set the raw NAND number of targets to the right value
- Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes
* tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes
mtd: rawnand: initialize ntargets with maxchips
Linus Torvalds [Mon, 24 Jun 2019 13:20:39 +0000 (21:20 +0800)]
Merge tag 'powerpc-5.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a bug in our context id handling on 64-bit hash CPUs,
which can lead to unrelated processes being able to read/write to each
other's virtual memory. See the commit for full details.
That is the fix for CVE-2019-12817.
This also adds a kernel selftest for the bug"
* tag 'powerpc-5.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add test of fork with mapping above 512TB
powerpc/mm/64s/hash: Reallocate context ids on fork
Linus Torvalds [Mon, 24 Jun 2019 13:11:01 +0000 (21:11 +0800)]
Merge tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linux
Pull auxdisplay cleanup from Miguel Ojeda:
"A cleanup for two drivers in auxdisplay: convert them to use
vm_map_pages_zero() (Souptick Joarder)"
* tag 'auxdisplay-for-linus-v5.2-rc7' of git://github.com/ojeda/linux:
auxdisplay/ht16k33.c: Convert to use vm_map_pages_zero()
auxdisplay/cfag12864bfb.c: Convert to use vm_map_pages_zero()
The commit dcb4b22eeaf4 ("spi-nor: s25fl512s supports region locking")
uncovered a probe error for s25fl512s, when the Quad Enable bit CR[1]
was set to one in the bootloader. When this bit is one, only the Write
Status (01h) command with two data byts may be used, the 01h command with
one data byte is not recognized and hence the error when trying to clear
the block protection bits.
Fix the above by using the Write Status (01h) command with two data bytes
when the Quad Enable bit is one.
Backward compatibility should be fine. The newly introduced
spi_nor_spansion_clear_sr_bp() is tightly coupled with the
spansion_quad_enable() function. Both assume that the Write Register
with 16 bits, together with the Read Configuration Register (35h)
instructions are supported.
Xin Long [Thu, 20 Jun 2019 10:39:28 +0000 (18:39 +0800)]
tipc: change to use register_pernet_device
This patch is to fix a dst defcnt leak, which can be reproduced by doing:
# ip net a c; ip net a s; modprobe tipc
# ip net e s ip l a n eth1 type veth peer n eth1 netns c
# ip net e c ip l s lo up; ip net e c ip l s eth1 up
# ip net e s ip l s lo up; ip net e s ip l s eth1 up
# ip net e c ip a a 1.1.1.2/8 dev eth1
# ip net e s ip a a 1.1.1.1/8 dev eth1
# ip net e c tipc b e m udp n u1 localip 1.1.1.2
# ip net e s tipc b e m udp n u1 localip 1.1.1.1
# ip net d c; ip net d s; rmmod tipc
and it will get stuck and keep logging the error:
unregister_netdevice: waiting for lo to become free. Usage count = 1
The cause is that a dst is held by the udp sock's sk_rx_dst set on udp rx
path with udp_early_demux == 1, and this dst (eventually holding lo dev)
can't be released as bearer's removal in tipc pernet .exit happens after
lo dev's removal, default_device pernet .exit.
"There are two distinct types of pernet_operations recognized: subsys and
device. At creation all subsys init functions are called before device
init functions, and at destruction all device exit functions are called
before subsys exit function."
So by calling register_pernet_device instead to register tipc_net_ops, the
pernet .exit() will be invoked earlier than loopback dev's removal when a
netns is being destroyed, as fou/gue does.
Note that vxlan and geneve udp tunnels don't have this issue, as the udp
sock is released in their device ndo_stop().
This fix is also necessary for tipc dst_cache, which will hold dsts on tx
path and I will introduce in my next patch.
Sergej Benilov [Thu, 20 Jun 2019 09:02:18 +0000 (11:02 +0200)]
sis900: fix TX completion
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing",
outbound throughput is dramatically reduced for some connections, as sis900
is doing TX completion within idle states only.
Make TX completion happen after every transmitted packet.
Test:
netperf
before patch:
> netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 253.44 0.06
after patch:
> netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 5.38 14.89
Thx to Dave Miller and Eric Dumazet for helpful hints
Roland Hii [Wed, 19 Jun 2019 14:41:48 +0000 (22:41 +0800)]
net: stmmac: set IC bit when transmitting frames with HW timestamp
When transmitting certain PTP frames, e.g. SYNC and DELAY_REQ, the
PTP daemon, e.g. ptp4l, is polling the driver for the frame transmit
hardware timestamp. The polling will most likely timeout if the tx
coalesce is enabled due to the Interrupt-on-Completion (IC) bit is
not set in tx descriptor for those frames.
This patch will ignore the tx coalesce parameter and set the IC bit
when transmitting PTP frames which need to report out the frame
transmit hardware timestamp to user space.
Fixes: f748be531d70 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by: Roland Hii <[email protected]> Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Roland Hii [Wed, 19 Jun 2019 14:13:48 +0000 (22:13 +0800)]
net: stmmac: fixed new system time seconds value calculation
When ADDSUB bit is set, the system time seconds field is calculated as
the complement of the seconds part of the update value.
For example, if 3.000000001 seconds need to be subtracted from the
system time, this field is calculated as
2^32 - 3 = 4294967296 - 3 = 0x100000000 - 3 = 0xFFFFFFFD
Previously, the 0x100000000 is mistakenly written as 100000000.
This is further simplified from
sec = (0x100000000ULL - sec);
to
sec = -sec;
Linus Torvalds [Sat, 22 Jun 2019 21:08:47 +0000 (14:08 -0700)]
Merge tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Revert a commit from the previous pile of fixes which causes new
lockdep splats. It is better to revert it for now and work on a better
and more well tested fix"
* tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt:
======================================================
WARNING: possible circular locking dependency detected
5.2.0-rc5 #78 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0
but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (device_domain_lock){....}:
_raw_spin_lock_irqsave+0x3c/0x50
dmar_insert_one_dev_info+0xbb/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
-> #0 (&(&iommu->lock)->rlock){+.+.}:
lock_acquire+0x9e/0x170
_raw_spin_lock+0x25/0x30
domain_context_mapping_one+0xa5/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
*** DEADLOCK ***
2 locks held by swapper/0/1:
#0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422
#1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
domain_context_mapping_one() is taking device_domain_lock first then
iommu lock, while dmar_insert_one_dev_info() is doing the reverse.
That should be introduced by commit:
7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and
device_domain_lock", 2019-05-27)
So far I still cannot figure out how the previous deadlock was
triggered (I cannot find iommu lock taken before calling of
iommu_flush_dev_iotlb()), however I'm pretty sure that that change
should be incomplete at least because it does not fix all the places
so we're still taking the locks in different orders, while reverting
that commit is very clean to me so far that we should always take
device_domain_lock first then the iommu lock.
We can continue to try to find the real culprit mentioned in 7560cc3ca7d9, but for now I think we should revert it to fix current
breakage.
Linus Torvalds [Sat, 22 Jun 2019 16:42:29 +0000 (09:42 -0700)]
Merge tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2
because we don't yet know how to support P2PDMA in that case (Logan
Gunthorpe)"
* tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
Linus Torvalds [Sat, 22 Jun 2019 16:39:03 +0000 (09:39 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three driver fixes (and one version number update): a suspend hang in
ufs, a qla hard lock on module removal and a qedi panic during
discovery"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix hardlockup in abort command during driver remove
scsi: ufs: Avoid runtime suspend possibly being blocked forever
scsi: qedi: update driver version to 8.37.0.20
scsi: qedi: Check targetname while finding boot target information
Linus Torvalds [Sat, 22 Jun 2019 16:09:42 +0000 (09:09 -0700)]
Merge tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is a frustratingly large batch at rc5. Some of these were sent
earlier but were missed by me due to being distracted by other things,
and some took a while to track down due to needing manual bisection on
old hardware. But still we clearly need to improve our testing of KVM,
and of 32-bit, so that we catch these earlier.
Summary: seven fixes, all for bugs introduced this cycle.
- The commit to add KASAN support broke booting on 32-bit SMP
machines, due to a refactoring that moved some setup out of the
secondary CPU path.
- A fix for another 32-bit SMP bug introduced by the fast syscall
entry implementation for 32-bit BOOKE. And a build fix for the same
commit.
- Our change to allow the DAWR to be force enabled on Power9
introduced a bug in KVM, where we clobber r3 leading to a host
crash.
- The same commit also exposed a previously unreachable bug in the
nested KVM handling of DAWR, which could lead to an oops in a
nested host.
- One of the DMA reworks broke the b43legacy WiFi driver on some
people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.
- A fix for TLB flushing in KVM introduced a new bug, as it neglected
to also flush the ERAT, this could lead to memory corruption in the
guest.
Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry
Finger, Michael Neuling, Suraj Jitindar Singh"
* tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
powerpc/32: fix build failure on book3e with KVM
powerpc/booke: fix fast syscall entry on SMP
powerpc/32s: fix initial setup of segment registers on secondary CPU
Marcel Holtmann [Sat, 22 Jun 2019 13:47:01 +0000 (15:47 +0200)]
Bluetooth: Fix regression with minimum encryption key size alignment
When trying to align the minimum encryption key size requirement for
Bluetooth connections, it turns out doing this in a central location in
the HCI connection handling code is not possible.
Original Bluetooth version up to 2.0 used a security model where the
L2CAP service would enforce authentication and encryption. Starting
with Bluetooth 2.1 and Secure Simple Pairing that model has changed into
that the connection initiator is responsible for providing an encrypted
ACL link before any L2CAP communication can happen.
Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and
before devices are causing a regression. The encryption key size check
needs to be moved out of the HCI connection handling into the L2CAP
channel setup.
To achieve this, the current check inside hci_conn_security() has been
moved into l2cap_check_enc_key_size() helper function and then called
from four decisions point inside L2CAP to cover all combinations of
Secure Simple Pairing enabled devices and device using legacy pairing
and legacy service security model.
Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643 Signed-off-by: Marcel Holtmann <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
Takashi Iwai [Wed, 19 Jun 2019 13:34:07 +0000 (15:34 +0200)]
ppp: mppe: Add softdep to arc4
The arc4 crypto is mandatory at ppp_mppe probe time, so let's put a
softdep line, so that the corresponding module gets prepared
gracefully. Without this, a simple inclusion to initrd via dracut
failed due to the missing dependency, for example.
Petr Oros [Wed, 19 Jun 2019 12:29:42 +0000 (14:29 +0200)]
be2net: fix link failure after ethtool offline test
Certain cards in conjunction with certain switches need a little more
time for link setup that results in ethtool link test failure after
offline test. Patch adds a loop that waits for a link setup finish.
Changes in v2:
- added fixes header
Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.") Signed-off-by: Petr Oros <[email protected]> Reviewed-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Colin Ian King [Wed, 19 Jun 2019 18:14:46 +0000 (19:14 +0100)]
x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz
The left shift of unsigned int cpu_khz will overflow for large values of
cpu_khz, so cast it to a long long before shifting it to avoid overvlow.
For example, this can happen when cpu_khz is 4194305, i.e. ~4.2 GHz.
Thomas Gleixner [Sat, 22 Jun 2019 09:16:25 +0000 (11:16 +0200)]
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull another handful of EFI fixes for v5.2 from Arnd:
- Fix a potential crash after kexec on arm64 with GICv3
- Fix a build warning on x86
- Stop policing the BGRT feature flags
- Use a non-blocking version of SetVariable() in the boot control driver
Tian Baofeng [Wed, 12 Jun 2019 08:18:10 +0000 (16:18 +0800)]
efibc: Replace variable set function in notifier call
Replace the variable set function from "efivar_entry_set" to
"efivar_entry_set_safe" in efibc panic notifier.
In safe function parameter "block" will set to false
and will call "efivar_entry_set_nonblocking"to set efi variables.
efivar_entry_set_nonblocking is guaranteed to
not block and is suitable for calling from crash/panic handlers.
In UEFI android platform, when warm reset happens,
with this change, efibc will not block the reboot process.
Otherwise, set variable will call queue work and send to other offlined
cpus then cause another panic, finally will cause reboot failure.
1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
Nault.
2) Don't access the DDM interface unless the transceiver implements it
in bnx2x, from Mauro S. M. Rodrigues.
3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
JingYi Hou.
4) Sign extension overflow in lio_core, from Colin Ian King.
5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.
6) Fix epollout hang in hvsock, from Sunil Muthuswamy.
7) Fix regression in default fib6_type, from David Ahern.
8) Handle memory limits in tcp_fragment more appropriately, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
tcp: refine memory limit test in tcp_fragment()
inet: clear num_timeout reqsk_alloc()
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
tun: wake up waitqueues after IFF_UP is set
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
...
Eric Dumazet [Fri, 21 Jun 2019 13:09:55 +0000 (06:09 -0700)]
tcp: refine memory limit test in tcp_fragment()
tcp_fragment() might be called for skbs in the write queue.
Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.
Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Christoph Paasch <[email protected]> Tested-by: Christoph Paasch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Fri, 21 Jun 2019 21:47:09 +0000 (14:47 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"This is probably our last -rc pull request. We don't have anything
else outstanding at the moment anyway, and with the summer months on
us and people taking trips, I expect the next weeks leading up to the
merge window to be pretty calm and sedate.
This has two simple, no brainer fixes for the EFA driver.
Then it has ten not quite so simple fixes for the hfi1 driver. The
problem with them is that they aren't simply one liner typo fixes.
They're still fixes, but they're more complex issues like livelock
under heavy load where the answer was to change work queue usage and
spinlock usage to resolve the problem, or issues with orphaned
requests during certain types of failures like link down which
required some more complex work to fix too. They all look like
legitimate fixes to me, they just aren't small like I wish they were.
Summary:
- 2 minor EFA fixes
- 10 hfi1 fixes related to scaling issues"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Handle mmap insertions overflow
RDMA/efa: Fix success return value in case of error
IB/hfi1: Handle port down properly in pio
IB/hfi1: Handle wakeup of orphaned QPs for pio
IB/hfi1: Wakeup QPs orphaned on wait list after flush
IB/hfi1: Use aborts to trigger RC throttling
IB/hfi1: Create inline to get extended headers
IB/hfi1: Silence txreq allocation warnings
IB/hfi1: Avoid hardlockup with flushlist_lock
IB/hfi1: Correct tid qp rcd to match verbs context
IB/hfi1: Close PSM sdma_progress sleep window
IB/hfi1: Validate fault injection opcode user input
Linus Torvalds [Fri, 21 Jun 2019 20:45:41 +0000 (13:45 -0700)]
Merge tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull more NFS client fixes from Anna Schumaker:
"These are mostly refcounting issues that people have found recently.
The revert fixes a suspend recovery performance issue.
- SUNRPC: Fix a credential refcount leak
- Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
- SUNRPC: Fix xps refcount imbalance on the error path
- NFS4: Only set creation opendata if O_CREAT"
* tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a credential refcount leak
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
net :sunrpc :clnt :Fix xps refcount imbalance on the error path
NFS4: Only set creation opendata if O_CREAT
Andy Lutomirski [Fri, 21 Jun 2019 15:43:04 +0000 (08:43 -0700)]
x86/vdso: Prevent segfaults due to hoisted vclock reads
GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks. This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read. This will segfault on bare metal.
This fixes commit 459e3a21535a ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code. There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.
On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.
Jens Axboe [Fri, 21 Jun 2019 16:20:18 +0000 (10:20 -0600)]
io_uring: ensure req->file is cleared on allocation
Stephen reports:
I hit the following General Protection Fault when testing io_uring via
the io_uring engine in fio. This was on a VM running 5.2-rc5 and the
latest version of fio. The issue occurs for both null_blk and fake NVMe
drives. I have not tested bare metal or real NVMe SSDs. The fio script
used is given below.
which occurs because using a kernel side submission thread isn't valid
without using fixed files (registered through io_uring_register()). This
causes io_uring to put the request after logging an error, but before
the file field is set in the request. If it happens to be non-zero, we
attempt to fput() garbage.
Fix this by ensuring that req->file is initialized when the request is
allocated.
Trond Myklebust [Thu, 20 Jun 2019 14:47:40 +0000 (10:47 -0400)]
SUNRPC: Fix a credential refcount leak
All callers of __rpc_clone_client() pass in a value for args->cred,
meaning that the credential gets assigned and referenced in
the call to rpc_new_client().
Anna Schumaker [Tue, 18 Jun 2019 18:57:33 +0000 (14:57 -0400)]
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
Jon Hunter reports:
"I have been noticing intermittent failures with a system suspend test on
some of our machines that have a NFS mounted root file-system. Bisecting
this issue points to your commit 431235818bc3 ("SUNRPC: Declare RPC
timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does
appear to resolve the problem.
The cause of the suspend failure appears to be a long delay observed
sometimes when resuming from suspend, and this is causing our test to
timeout."
We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up. This leads to a crash in
current_umask().
Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.
Linus Torvalds [Fri, 21 Jun 2019 18:03:33 +0000 (11:03 -0700)]
Merge tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just catching up on the week since back from holidays, everything
seems quite sane.
core:
- copy_to_user fix for really legacy codepaths.
vmwgfx:
- two dma fixes
- one virt hw interaction fix
i915:
- modesetting fix
- gvt fix
panfrost:
- BO unmapping fix
imx:
- image converter fixes"
* tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Don't clobber M/N values during fastset check
drm: return -EFAULT if copy_to_user() fails
drm/panfrost: Make sure a BO is only unmapped when appropriate
drm/i915/gvt: ignore unexpected pvinfo write
gpu: ipu-v3: image-convert: Fix image downsize coefficients
gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats
gpu: ipu-v3: image-convert: Fix input bytesperline width/height align
drm/vmwgfx: fix a warning due to missing dma_parms
drm/vmwgfx: Honor the sg list segment size limitation
drm/vmwgfx: Use the backdoor port if the HB port is not available
Linus Torvalds [Fri, 21 Jun 2019 17:20:19 +0000 (10:20 -0700)]
Merge tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO/counter fixes from Greg KH:
"Here are some small driver bugfixes for some staging/iio/counter
drivers.
Staging and IIO have been lumped together for a while, as those
subsystems cross the areas a log, and counter is used by IIO, so
that's why they are all in one pull request here.
These are small fixes for reported issues in some iio drivers, the
erofs filesystem, and a build issue for counter code.
All have been in linux-next with no reported issues"
* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: erofs: add requirements field in superblock
counter/ftm-quaddec: Add missing dependencies in Kconfig
staging: iio: adt7316: Fix build errors when GPIOLIB is not set
iio: temperature: mlx90632 Relax the compatibility check
iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
staging:iio:ad7150: fix threshold mode config bit
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: use u64_to_user_ptr() for reading user pointers
doc: fix documentation about UIO_MEM_LOGICAL using
MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
docs: fb: Add TER16x32 to the available font names
MAINTAINERS: fpga: hand off maintainership to Moritz
thunderbolt: Implement CIO reset correctly for Titan Ridge
binder: fix possible UAF when freeing buffer
thunderbolt: Make sure device runtime resume completes before taking domain lock
soundwire: intel: set dai min and max channels correctly
soundwire: stream: fix bad unlock balance
soundwire: stream: fix out of boundary access on port properties
Linus Torvalds [Fri, 21 Jun 2019 17:16:41 +0000 (10:16 -0700)]
Merge tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are four small USB fixes for 5.2-rc6.
They include two xhci bugfixes, a chipidea fix, and a small dwc2 fix.
Nothing major, just nice things to get resolved for reported issues.
All have been in linux-next with no reported issues"
* tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: detect USB 3.2 capable host controllers correctly
usb: xhci: Don't try to recover an endpoint if port is in error state.
usb: dwc2: Use generic PHY width in params setup
usb: chipidea: udc: workaround for endpoint conflict issue
Linus Torvalds [Fri, 21 Jun 2019 16:58:42 +0000 (09:58 -0700)]
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Linus Torvalds [Fri, 21 Jun 2019 16:51:44 +0000 (09:51 -0700)]
Merge tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small SMB3 fixes, all for stable"
* tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix GlobalMid_Lock bug in cifs_reconnect
SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write
cifs: add spinlock for the openFileList to cifsInodeInfo
cifs: fix panic in smb2_reconnect
Dave Airlie [Fri, 21 Jun 2019 01:44:20 +0000 (11:44 +1000)]
Merge tag 'imx-drm-fixes-2019-06-20' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: ipu-v3 image converter fixes
This series fixes input buffer alignment and downsizer configuration
to adhere to IPU mem2mem CSC/scaler hardware restrictions in certain
downscaling ratios.
Dave Airlie [Fri, 21 Jun 2019 01:26:59 +0000 (11:26 +1000)]
Merge branch 'vmwgfx-fixes-5.2' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of fixes for vmwgfx. Two fixes for a DMA sg-list debug warning
message. These are not cc'd stable since there is no evidence of actual
breakage.
On fix for the high-bandwidth backdoor port which is cc'd stable due to
upcoming hardware, on which the code would otherwise break.
ARM: 8867/1: vdso: pass --be8 to linker if necessary
The commit fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC)
to link VDSO") removed the passing of CFLAGS, since ld doesn't take
those directly. However, prior, big-endian ARM was relying on gcc to
translate its -mbe8 option into ld's --be8 option. Lacking this, ld
generated be32 code, making the VDSO generate SIGILL when called by
userspace.
This commit passes --be8 if CONFIG_CPU_ENDIAN_BE8 is enabled.
Linus Torvalds [Thu, 20 Jun 2019 21:19:34 +0000 (14:19 -0700)]
Merge tag 'ovl-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two regressions in this cycle, and a couple of older bugs"
* tag 'ovl-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: make i_ino consistent with st_ino in more cases
ovl: fix typo in MODULE_PARM_DESC
ovl: fix bogus -Wmaybe-unitialized warning
ovl: don't fail with disconnected lower NFS
ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls
Linus Torvalds [Thu, 20 Jun 2019 21:16:16 +0000 (14:16 -0700)]
Merge tag 'fuse-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Just a single revert, fixing a regression in -rc1"
* tag 'fuse-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
Revert "fuse: require /dev/fuse reads to have enough buffer capacity"
Linus Torvalds [Thu, 20 Jun 2019 20:50:37 +0000 (13:50 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and x86, plus selftest patches and nicer structs for
nested state save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: arm/arm64: Fix emulated ptimer irq injection
tests: kvm: Check for a kernel warning
kvm: tests: Sort tests in the Makefile alphabetically
KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT
KVM: x86: Modify struct kvm_nested_state to have explicit fields for data
KVM: fix typo in documentation
KVM: nVMX: use correct clean fields when copying from eVMCS
KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy
KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST
KVM: arm64: Implement vq_present() as a macro
Jan Kara [Wed, 19 Jun 2019 07:05:41 +0000 (09:05 +0200)]
scsi: vmw_pscsi: Fix use-after-free in pvscsi_queue_lck()
Once we unlock adapter->hw_lock in pvscsi_queue_lck() nothing prevents just
queued scsi_cmnd from completing and freeing the request. Thus cmd->cmnd[0]
dereference can dereference already freed request leading to kernel crashes
or other issues (which one of our customers observed). Store cmd->cmnd[0]
in a local variable before unlocking adapter->hw_lock to fix the issue.
Linus Torvalds [Thu, 20 Jun 2019 19:04:57 +0000 (12:04 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"This is mainly a couple of email address updates to MAINTAINERS, but
we've also fixed a UAPI build issue with musl libc and an accidental
double-initialisation of our pgd_cache due to a naming conflict with a
weak symbol.
There are a couple of outstanding issues that have been reported, but
it doesn't look like they're new and we're still a long way off from
fully debugging them.
Summary:
- Fix use of #include in UAPI headers for compatability with musl libc
- Update email addresses in MAINTAINERS
- Fix initialisation of pgd_cache due to name collision with weak symbol"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: don't initialize pgd_cache twice
MAINTAINERS: Update my email address
arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>
arm64: ssbd: explicitly depend on <linux/prctl.h>
MAINTAINERS: Update my email address to use @kernel.org
Linus Torvalds [Thu, 20 Jun 2019 19:03:41 +0000 (12:03 -0700)]
Merge tag 's390-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Disable address-of-packed-member warning in s390 specific boot code
to get rid of a gcc9 warning which otherwise is already disabled for
the whole kernel.
- Fix yet another compiler error seen with CONFIG_OPTIMIZE_INLINING
enabled.
- Fix memory leak in vfio-ccw code on module exit.
* tag 's390-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Destroy kmem cache region on module exit
s390/ctl_reg: mark __ctl_set_bit and __ctl_clear_bit as __always_inline
s390/boot: disable address-of-packed-member warning
Linus Torvalds [Thu, 20 Jun 2019 17:12:53 +0000 (10:12 -0700)]
Merge tag 'for_v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull two misc vfs fixes from Jan Kara:
"One small quota fix fixing spurious EDQUOT errors and one fanotify fix
fixing a bug in the new fanotify FID reporting code"
* tag 'for_v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: update connector fsid cache on add mark
quota: fix a problem about transfer quota
David Howells [Thu, 20 Jun 2019 17:12:02 +0000 (18:12 +0100)]
afs: Fix setting of i_blocks
The setting of i_blocks, which is calculated from i_size, has got
accidentally misordered relative to the setting of i_size when initially
setting up an inode. Further, i_blocks isn't updated by afs_apply_status()
when the size is updated.
To fix this, break the i_size/i_blocks setting out into a helper function
and call it from both places.
Fixes: a58823ac4589 ("afs: Fix application of status and callback to be under same lock") Signed-off-by: David Howells <[email protected]>
Linus Torvalds [Thu, 20 Jun 2019 17:08:38 +0000 (10:08 -0700)]
Merge tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
contains fixes for a WiFi driver, which device is attached to the SDIO
interface. Patches for the WiFi driver have been acked by the
corresponding maintainers.
Summary:
MMC core:
- Make switch to eMMC HS400 more robust for some controllers
- Add two SDIO func API to manage re-tuning constraints
- Prevent processing SDIO IRQs when the card is suspended
MMC host:
- sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
- mtk-sd: Fixup support for SDIO IRQs
- sdhci-pci-o2micro: Fixup support for tuning
Wireless BRCMFMAC (SDIO):
- Deal with expected transmission errors related to the idle states
(handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
on rk3288-veyron-minnie, rk3288-veyron-speedy and
rk3288-veyron-mickey"
* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Prevent processing SDIO IRQs when the card is suspended
mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
brcmfmac: sdio: Don't tune while the card is off
mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
brcmfmac: sdio: Disable auto-tuning around commands expected to fail
mmc: core: API to temporarily disable retuning for SDIO CRC errors
Revert "brcmfmac: disable command decode in sdio_aos"
mmc: mediatek: fix SDIO IRQ detection issue
mmc: mediatek: fix SDIO IRQ interrupt handle flow
mmc: core: complete HS400 before checking status
mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H
Linus Torvalds [Thu, 20 Jun 2019 16:58:35 +0000 (09:58 -0700)]
Merge tag 'for-linus-20190620' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series.
One is a set of two patches from Christoph, fixing a page leak on same
page merges. Boiled down version of a bigger fix, but this one is more
appropriate for this late in the cycle (and easier to backport to
stable).
The last patch is for a divide error in MD, from Mariusz (via Song)"
* tag 'for-linus-20190620' of git://git.kernel.dk/linux-block:
md: fix for divide error in status_resync
block: fix page leak when merging to same page
block: return from __bio_try_merge_page if merging occured in the same page
Paolo Bonzini [Thu, 20 Jun 2019 16:24:18 +0000 (18:24 +0200)]
Merge tag 'kvmarm-fixes-for-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.2, take #2
- SVE cleanup killing a warning with ancient GCC versions
- Don't report non-existent system registers to userspace
- Fix memory leak when freeing the vgic ITS
- Properly lower the interrupt on the emulated physical timer
Paolo Bonzini [Wed, 19 Jun 2019 14:52:27 +0000 (16:52 +0200)]
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
Commit 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS
state before setting new state", 2019-05-02) broke evmcs_test because the
eVMCS setup must be performed even if there is no VMXON region defined,
as long as the eVMCS bit is set in the assist page.
While the simplest possible fix would be to add a check on
kvm_state->flags & KVM_STATE_NESTED_EVMCS in the initial "if" that
covers kvm_state->hdr.vmx.vmxon_pa == -1ull, that is quite ugly.
Instead, this patch moves checks earlier in the function and
conditionalizes them on kvm_state->hdr.vmx.vmxon_pa, so that
vmx_set_nested_state always goes through vmx_leave_nested
and nested_enable_evmcs.
Fixes: 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state") Cc: Aaron Lewis <[email protected]> Reviewed-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
David Howells [Thu, 20 Jun 2019 15:49:35 +0000 (16:49 +0100)]
afs: Fix vlserver record corruption
Because I made the afs_call struct share pointers to an afs_server object
and an afs_vlserver object to save space, afs_put_call() calls
afs_put_server() on afs_vlserver object (which is only meant for the
afs_server object) because it sees that call->server isn't NULL.
This means that the afs_vlserver object gets unpredictably and randomly
modified, depending on what config options are set (such as lockdep).
Fix this by getting rid of the union and having two non-overlapping
pointers in the afs_call struct.
Fixes: ffba718e9354 ("afs: Get rid of afs_call::reply[]") Signed-off-by: David Howells <[email protected]>
David Howells [Wed, 19 Jun 2019 09:56:03 +0000 (10:56 +0100)]
afs: Fix over zealous "vnode modified" warnings
Occasionally, warnings like this:
vnode modified 2af7 on {10000b:1} [exp 2af2] YFS.FetchStatus(vnode)
are emitted into the kernel log. This indicates that when we were applying
the updated vnode (file) status retrieved from the server to an inode we
saw that the data version number wasn't what we were expecting (in this
case it's 0x2af7 rather than 0x2af2).
We've usually received a callback from the server prior to this point - or
the callback promise has lapsed - so the warning is merely informative and
the state is to be expected.
Fix this by only emitting the warning if the we still think that we have a
valid callback promise and haven't received a callback.
Also change the format slightly so so that the new data version doesn't
look like part of the text, the like is prefixed with "kAFS: " and the
message is ranked as a warning.
Fixes: 31143d5d515e ("AFS: implement basic file write support") Reported-by: Ian Wienand <[email protected]> Signed-off-by: David Howells <[email protected]>
Reinette Chatre [Wed, 19 Jun 2019 20:27:16 +0000 (13:27 -0700)]
x86/resctrl: Prevent possible overrun during bitmap operations
While the DOC at the beginning of lib/bitmap.c explicitly states that
"The number of valid bits in a given bitmap does _not_ need to be an
exact multiple of BITS_PER_LONG.", some of the bitmap operations do
indeed access BITS_PER_LONG portions of the provided bitmap no matter
the size of the provided bitmap.
For example, if find_first_bit() is provided with an 8 bit bitmap the
operation will access BITS_PER_LONG bits from the provided bitmap. While
the operation ensures that these extra bits do not affect the result,
the memory is still accessed.
The capacity bitmasks (CBMs) are typically stored in u32 since they
can never exceed 32 bits. A few instances exist where a bitmap_*
operation is performed on a CBM by simply pointing the bitmap operation
to the stored u32 value.
The consequence of this pattern is that some bitmap_* operations will
access out-of-bounds memory when interacting with the provided CBM.
This same issue has previously been addressed with commit 49e00eee0061
("x86/intel_rdt: Fix out-of-bounds memory access in CBM tests")
but at that time not all instances of the issue were fixed.
Fix this by using an unsigned long to store the capacity bitmask data
that is passed to bitmap functions.
Souptick Joarder [Sun, 26 May 2019 16:11:10 +0000 (21:41 +0530)]
auxdisplay/ht16k33.c: Convert to use vm_map_pages_zero()
While using mmap, the incorrect values of length and vm_pgoff are
ignored and this driver goes ahead with mapping fbdev.buffer
to user vma.
Convert vm_insert_pages() to use vm_map_pages_zero(). We could later
"fix" these drivers to behave according to the normal vm_pgoff
offsetting simply by removing the _zero suffix on the function name
and if that causes regressions, it gives us an easy way to revert.
Souptick Joarder [Sun, 26 May 2019 16:10:27 +0000 (21:40 +0530)]
auxdisplay/cfag12864bfb.c: Convert to use vm_map_pages_zero()
While using mmap, the incorrect values of length and vm_pgoff are
ignored and this driver goes ahead with mapping cfag12864b_buffer
to user vma.
Convert vm_insert_pages() to use vm_map_pages_zero(). We could later
"fix" these drivers to behave according to the normal vm_pgoff
offsetting simply by removing the _zero suffix on the function name and
if that causes regressions, it gives us an easy way to revert.
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
When a guest vcpu moves from one physical thread to another it is
necessary for the host to perform a tlb flush on the previous core if
another vcpu from the same guest is going to run there. This is because the
guest may use the local form of the tlb invalidation instruction meaning
stale tlb entries would persist where it previously ran. This is handled
on guest entry in kvmppc_check_need_tlb_flush() which calls
flush_guest_tlb() to perform the tlb flush.
Previously the generic radix__local_flush_tlb_lpid_guest() function was
used, however the functionality was reimplemented in flush_guest_tlb()
to avoid the trace_tlbie() call as the flushing may be done in real
mode. The reimplementation in flush_guest_tlb() was missing an erat
invalidation after flushing the tlb.
This lead to observable memory corruption in the guest due to the
caching of stale translations. Fix this by adding the erat invalidation.
Merge tag 'fixes-for-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v5.2-rc5
A single fix to take into account the PHY width during initialization of
dwc2 driver. This change allows deviceTree to pass PHY width if
necessary.
Signed-off-by: Felipe Balbi <[email protected]>
* tag 'fixes-for-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: dwc2: Use generic PHY width in params setup
Arnd Bergmann [Mon, 17 Jun 2019 12:41:33 +0000 (14:41 +0200)]
habanalabs: use u64_to_user_ptr() for reading user pointers
We cannot cast a 64-bit integer to a pointer on 32-bit architectures
without a warning:
drivers/misc/habanalabs/habanalabs_ioctl.c: In function 'debug_coresight':
drivers/misc/habanalabs/habanalabs_ioctl.c:143:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
input = memdup_user((const void __user *) args->input_ptr,
Use the macro that was defined for this purpose.
Fixes: 315bc055ed56 ("habanalabs: add new IOCTL for debug, tracing and profiling") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
projects / linux.git / log