From: Palmer Dabbelt Date: Wed, 24 Jul 2024 14:33:41 +0000 (-0700) Subject: Merge patch "Enable SPCR table for console output on RISC-V" X-Git-Tag: v6.11-rc1~27^2~3 X-Git-Url: https://repo.jachan.dev/linux.git/commitdiff_plain/ec1dc56b54d679cbfaa7ef7abbf23bdeac029af1?hp=-c Merge patch "Enable SPCR table for console output on RISC-V" Sia Jee Heng says: The ACPI SPCR code has been used to enable console output for ARM64 and X86. The same code can be reused for RISC-V. Furthermore, SPCR table is mandated for headless system as outlined in the RISC-V BRS Specification, chapter 6. * b4-shazam-merge: RISC-V: ACPI: Enable SPCR table for console output on RISC-V Link: https://lore.kernel.org/r/20240502073751.102093-1-jeeheng.sia@starfivetech.com Signed-off-by: Palmer Dabbelt --- ec1dc56b54d679cbfaa7ef7abbf23bdeac029af1 diff --combined arch/riscv/Kconfig index 19ca402e6f26,287c17daa9d5..b32472fe84c2 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@@ -14,10 -14,9 +14,11 @@@ config RISC def_bool y select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI + select ACPI_SPCR_TABLE if ACPI select ARCH_DMA_DEFAULT_COHERENT select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION + select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM_VMEMMAP + select ARCH_ENABLE_MEMORY_HOTREMOVE if MEMORY_HOTPLUG select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2 select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE select ARCH_HAS_BINFMT_FLAT @@@ -37,7 -36,6 +38,7 @@@ select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE select ARCH_HAS_PMEM_API select ARCH_HAS_PREPARE_SYNC_CORE_CMD + select ARCH_HAS_PTE_DEVMAP if 64BIT && MMU select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SET_DIRECT_MAP if MMU select ARCH_HAS_SET_MEMORY if MMU @@@ -49,7 -47,6 +50,7 @@@ select ARCH_HAS_UBSAN select ARCH_HAS_VDSO_DATA select ARCH_KEEP_MEMBLOCK if ACPI + select ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE if 64BIT && MMU select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT select ARCH_STACKWALK @@@ -73,7 -70,6 +74,7 @@@ select ARCH_WANT_GENERAL_HUGETLB if !RISCV_ISA_SVNAPOT select ARCH_WANT_HUGE_PMD_SHARE if 64BIT select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL + select ARCH_WANT_OPTIMIZE_DAX_VMEMMAP select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP select ARCH_WANTS_NO_INSTR select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE @@@ -111,7 -107,7 +112,7 @@@ select HAS_IOPORT if MMU select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP - select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL + select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL select HAVE_ARCH_KASAN if MMU && 64BIT @@@ -123,7 -119,6 +124,7 @@@ select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_STACKLEAK select HAVE_ARCH_THREAD_STRUCT_WHITELIST select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU @@@ -155,6 -150,7 +156,6 @@@ select HAVE_KERNEL_UNCOMPRESSED if !XIP_KERNEL && !EFI_ZBOOT select HAVE_KERNEL_ZSTD if !XIP_KERNEL && !EFI_ZBOOT select HAVE_KPROBES if !XIP_KERNEL - select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL select HAVE_KRETPROBES if !XIP_KERNEL # https://github.com/ClangBuiltLinux/linux/issues/1881 select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if !LD_IS_LLD @@@ -600,19 -596,6 +601,19 @@@ config RISCV_ISA_V_PREEMPTIV preemption. Enabling this config will result in higher memory consumption due to the allocation of per-task's kernel Vector context. +config RISCV_ISA_ZAWRS + bool "Zawrs extension support for more efficient busy waiting" + depends on RISCV_ALTERNATIVE + default y + help + The Zawrs extension defines instructions to be used in polling loops + which allow a hart to enter a low-power state or to trap to the + hypervisor while waiting on a store to a memory location. Enable the + use of these instructions in the kernel when the Zawrs extension is + detected at boot. + + If you don't know what to do here, say Y. + config TOOLCHAIN_HAS_ZBB bool default y @@@ -628,18 -611,6 +629,18 @@@ config TOOLCHAIN_HAS_VECTOR_CRYPT def_bool $(as-instr, .option arch$(comma) +v$(comma) +zvkb) depends on AS_HAS_OPTION_ARCH +config RISCV_ISA_ZBA + bool "Zba extension support for bit manipulation instructions" + default y + help + Add support for enabling optimisations in the kernel when the Zba + extension is detected at boot. + + The Zba extension provides instructions to accelerate the generation + of addresses that index into arrays of basic data types. + + If you don't know what to do here, say Y. + config RISCV_ISA_ZBB bool "Zbb extension support for bit manipulation instructions" depends on TOOLCHAIN_HAS_ZBB @@@ -655,29 -626,6 +656,29 @@@ If you don't know what to do here, say Y. +config TOOLCHAIN_HAS_ZBC + bool + default y + depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zbc) + depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zbc) + depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900 + depends on AS_HAS_OPTION_ARCH + +config RISCV_ISA_ZBC + bool "Zbc extension support for carry-less multiplication instructions" + depends on TOOLCHAIN_HAS_ZBC + depends on MMU + depends on RISCV_ALTERNATIVE + default y + help + Adds support to dynamically detect the presence of the Zbc + extension (carry-less multiplication) and enable its usage. + + The Zbc extension could accelerate CRC (cyclic redundancy check) + calculations. + + If you don't know what to do here, say Y. + config RISCV_ISA_ZICBOM bool "Zicbom extension support for non-coherent DMA operation" depends on MMU @@@ -707,6 -655,13 +708,6 @@@ config RISCV_ISA_ZICBO If you don't know what to do here, say Y. -config TOOLCHAIN_HAS_ZIHINTPAUSE - bool - default y - depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zihintpause) - depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause) - depends on LLD_VERSION >= 150000 || LD_VERSION >= 23600 - config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI def_bool y # https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc @@@ -820,8 -775,6 +821,8 @@@ config RISCV_EFFICIENT_UNALIGNED_ACCES endchoice +source "arch/riscv/Kconfig.vendor" + endmenu # "Platform type" menu "Kernel features" @@@ -1015,17 -968,6 +1016,17 @@@ config EF allow the kernel to be booted as an EFI application. This is only useful on systems that have UEFI firmware. +config DMI + bool "Enable support for SMBIOS (DMI) tables" + depends on EFI + default y + help + This enables SMBIOS/DMI feature for systems. + + This option is only useful on systems that have UEFI firmware. + However, even with this option, the resultant kernel should + continue to boot on existing non-UEFI platforms. + config CC_HAVE_STACKPROTECTOR_TLS def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0) diff --combined arch/riscv/kernel/acpi.c index 040bdbfea2b4,43a12c00ae8b..ba957aaca5cb --- a/arch/riscv/kernel/acpi.c +++ b/arch/riscv/kernel/acpi.c @@@ -17,7 -17,9 +17,9 @@@ #include #include #include + #include #include + #include int acpi_noirq = 1; /* skip ACPI IRQ initialization */ int acpi_disabled = 1; @@@ -131,7 -133,7 +133,7 @@@ void __init acpi_boot_table_init(void if (param_acpi_off || (!param_acpi_on && !param_acpi_force && efi.acpi20 == EFI_INVALID_TABLE_ADDR)) - return; + goto done; /* * ACPI is disabled at this point. Enable it in order to parse @@@ -151,6 -153,14 +153,14 @@@ if (!param_acpi_force) disable_acpi(); } + + done: + if (acpi_disabled) { + if (earlycon_acpi_spcr_enable) + early_init_dt_scan_chosen_stdout(); + } else { + acpi_parse_spcr(earlycon_acpi_spcr_enable, true); + } } static int acpi_parse_madt_rintc(union acpi_subtable_headers *header, const unsigned long end) @@@ -191,6 -201,11 +201,6 @@@ struct acpi_madt_rintc *acpi_cpu_get_ma return &cpu_madt_rintc[cpu]; } -u32 get_acpi_id_for_cpu(int cpu) -{ - return acpi_cpu_get_madt_rintc(cpu)->uid; -} - /* * __acpi_map_table() will be called before paging_init(), so early_ioremap() * or early_memremap() should be called here to for ACPI table mapping.