const struct ocelot_pincfg_data *pincfg_data;
struct ocelot_pmx_func func[FUNC_MAX];
u8 stride;
+ struct workqueue_struct *wq;
};
struct ocelot_match_data {
struct ocelot_pincfg_data pincfg_data;
};
+struct ocelot_irq_work {
+ struct work_struct irq_work;
+ struct irq_desc *irq_desc;
+};
+
#define LUTON_P(p, f0, f1) \
static struct ocelot_pin_caps luton_pin_##p = { \
.pin = p, \
gpiochip_disable_irq(chip, gpio);
}
+static void ocelot_irq_work(struct work_struct *work)
+{
+ struct ocelot_irq_work *w = container_of(work, struct ocelot_irq_work, irq_work);
+ struct irq_chip *parent_chip = irq_desc_get_chip(w->irq_desc);
+ struct gpio_chip *chip = irq_desc_get_chip_data(w->irq_desc);
+ struct irq_data *data = irq_desc_get_irq_data(w->irq_desc);
+ unsigned int gpio = irqd_to_hwirq(data);
+
+ local_irq_disable();
+ chained_irq_enter(parent_chip, w->irq_desc);
+ generic_handle_domain_irq(chip->irq.domain, gpio);
+ chained_irq_exit(parent_chip, w->irq_desc);
+ local_irq_enable();
+
+ kfree(w);
+}
+
+static void ocelot_irq_unmask_level(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct ocelot_pinctrl *info = gpiochip_get_data(chip);
+ struct irq_desc *desc = irq_data_to_desc(data);
+ unsigned int gpio = irqd_to_hwirq(data);
+ unsigned int bit = BIT(gpio % 32);
+ bool ack = false, active = false;
+ u8 trigger_level;
+ int val;
+
+ trigger_level = irqd_get_trigger_type(data);
+
+ /* Check if the interrupt line is still active. */
+ regmap_read(info->map, REG(OCELOT_GPIO_IN, info, gpio), &val);
+ if ((!(val & bit) && trigger_level == IRQ_TYPE_LEVEL_LOW) ||
+ (val & bit && trigger_level == IRQ_TYPE_LEVEL_HIGH))
+ active = true;
+
+ /*
+ * Check if the interrupt controller has seen any changes in the
+ * interrupt line.
+ */
+ regmap_read(info->map, REG(OCELOT_GPIO_INTR, info, gpio), &val);
+ if (val & bit)
+ ack = true;
+
+ /* Enable the interrupt now */
+ gpiochip_enable_irq(chip, gpio);
+ regmap_update_bits(info->map, REG(OCELOT_GPIO_INTR_ENA, info, gpio),
+ bit, bit);
+
+ /*
+ * In case the interrupt line is still active and the interrupt
+ * controller has not seen any changes in the interrupt line, then it
+ * means that there happen another interrupt while the line was active.
+ * So we missed that one, so we need to kick the interrupt again
+ * handler.
+ */
+ if (active && !ack) {
+ struct ocelot_irq_work *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (!work)
+ return;
+
+ work->irq_desc = desc;
+ INIT_WORK(&work->irq_work, ocelot_irq_work);
+ queue_work(info->wq, &work->irq_work);
+ }
+}
+
static void ocelot_irq_unmask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
static int ocelot_irq_set_type(struct irq_data *data, unsigned int type);
-static struct irq_chip ocelot_eoi_irqchip = {
+static struct irq_chip ocelot_level_irqchip = {
.name = "gpio",
.irq_mask = ocelot_irq_mask,
- .irq_eoi = ocelot_irq_ack,
- .irq_unmask = ocelot_irq_unmask,
- .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED |
- IRQCHIP_IMMUTABLE,
+ .irq_ack = ocelot_irq_ack,
+ .irq_unmask = ocelot_irq_unmask_level,
+ .flags = IRQCHIP_IMMUTABLE,
.irq_set_type = ocelot_irq_set_type,
GPIOCHIP_IRQ_RESOURCE_HELPERS
};
static int ocelot_irq_set_type(struct irq_data *data, unsigned int type)
{
- type &= IRQ_TYPE_SENSE_MASK;
-
- if (!(type & (IRQ_TYPE_EDGE_BOTH | IRQ_TYPE_LEVEL_HIGH)))
- return -EINVAL;
-
- if (type & IRQ_TYPE_LEVEL_HIGH)
- irq_set_chip_handler_name_locked(data, &ocelot_eoi_irqchip,
- handle_fasteoi_irq, NULL);
+ if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ irq_set_chip_handler_name_locked(data, &ocelot_level_irqchip,
+ handle_level_irq, NULL);
if (type & IRQ_TYPE_EDGE_BOTH)
irq_set_chip_handler_name_locked(data, &ocelot_irqchip,
handle_edge_irq, NULL);
if (!info->desc)
return -ENOMEM;
+ info->wq = alloc_ordered_workqueue("ocelot_ordered", 0);
+ if (!info->wq)
+ return -ENOMEM;
+
info->pincfg_data = &data->pincfg_data;
reset = devm_reset_control_get_optional_shared(dev, "switch");
if (IS_ERR(info->map))
return dev_err_probe(dev, PTR_ERR(info->map),
"Failed to create regmap\n");
- dev_set_drvdata(dev, info->map);
+ dev_set_drvdata(dev, info);
info->dev = dev;
/* Pinconf registers */
return 0;
}
+static int ocelot_pinctrl_remove(struct platform_device *pdev)
+{
+ struct ocelot_pinctrl *info = platform_get_drvdata(pdev);
+
+ destroy_workqueue(info->wq);
+
+ return 0;
+}
+
static struct platform_driver ocelot_pinctrl_driver = {
.driver = {
.name = "pinctrl-ocelot",
.suppress_bind_attrs = true,
},
.probe = ocelot_pinctrl_probe,
+ .remove = ocelot_pinctrl_remove,
};
module_platform_driver(ocelot_pinctrl_driver);
MODULE_LICENSE("Dual MIT/GPL");
projects / linux.git / blobdiff