3c503: convert to net_device_ops

[linux.git] / drivers / net / bnx2.h

diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 617d953401607e884873cf41a32fdf6dd73c1024..34ca47812af43440777a457a95eeececaa27ca02 100644 (file)
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -4199,7 +4199,14 @@ struct l2_fhdr {
 
 #define BNX2_RBUF_CONFIG                               0x0020000c
 #define BNX2_RBUF_CONFIG_XOFF_TRIP                      (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu)             \
+       ((((mtu) - 1500) * 31 / 1000) + 54)
 #define BNX2_RBUF_CONFIG_XON_TRIP                       (0x3ffL<<16)
+#define BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu)              \
+       ((((mtu) - 1500) * 39 / 1000) + 66)
+#define BNX2_RBUF_CONFIG_VAL(mtu)                       \
+       (BNX2_RBUF_CONFIG_XOFF_TRIP_VAL(mtu) |           \
+       (BNX2_RBUF_CONFIG_XON_TRIP_VAL(mtu) << 16))
 
 #define BNX2_RBUF_FW_BUF_ALLOC                         0x00200010
 #define BNX2_RBUF_FW_BUF_ALLOC_VALUE                    (0x1ffL<<7)
@@ -4221,11 +4228,25 @@ struct l2_fhdr {
 
 #define BNX2_RBUF_CONFIG2                              0x0020001c
 #define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP                         (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu)        \
+       ((((mtu) - 1500) * 4 / 1000) + 5)
 #define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP                         (0x3ffL<<16)
+#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu)        \
+       ((((mtu) - 1500) * 2 / 100) + 30)
+#define BNX2_RBUF_CONFIG2_VAL(mtu)                      \
+       (BNX2_RBUF_CONFIG2_MAC_DROP_TRIP_VAL(mtu) |      \
+       (BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP_VAL(mtu) << 16))
 
 #define BNX2_RBUF_CONFIG3                              0x00200020
 #define BNX2_RBUF_CONFIG3_CU_DROP_TRIP                  (0x3ffL<<0)
+#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu)                 \
+       ((((mtu) - 1500) * 12 / 1000) + 18)
 #define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP                  (0x3ffL<<16)
+#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu)                 \
+       ((((mtu) - 1500) * 2 / 100) + 30)
+#define BNX2_RBUF_CONFIG3_VAL(mtu)                      \
+       (BNX2_RBUF_CONFIG3_CU_DROP_TRIP_VAL(mtu) |       \
+       (BNX2_RBUF_CONFIG3_CU_KEEP_TRIP_VAL(mtu) << 16))
 
 #define BNX2_RBUF_PKT_DATA                             0x00208000
 #define BNX2_RBUF_CLIST_DATA                           0x00210000
@@ -6658,8 +6679,6 @@ struct bnx2_napi {
        struct bnx2_tx_ring_info        tx_ring;
 };
 
-#define BNX2_TIMER_INTERVAL                    HZ
-
 struct bnx2 {
        /* Fields used in the tx and intr/napi performance paths are grouped */
        /* together in the beginning of the structure. */
@@ -6707,7 +6726,11 @@ struct bnx2 {
 
        /* End of fields used in the performance code paths. */
 
-       int                     current_interval;
+       unsigned int            current_interval;
+#define BNX2_TIMER_INTERVAL            HZ
+#define BNX2_SERDES_AN_TIMEOUT         (HZ / 3)
+#define BNX2_SERDES_FORCED_TIMEOUT     (HZ / 10)
+
        struct                  timer_list timer;
        struct work_struct      reset_task;
 
@@ -6839,8 +6862,6 @@ struct bnx2 {
 #define PHY_LOOPBACK           2
 
        u8                      serdes_an_pending;
-#define SERDES_AN_TIMEOUT      (HZ / 3)
-#define SERDES_FORCED_TIMEOUT  (HZ / 10)
 
        u8                      mac_addr[8];
 
@@ -6938,14 +6959,14 @@ struct fw_info {
 /* This value (in milliseconds) determines the frequency of the driver
  * issuing the PULSE message code.  The firmware monitors this periodic
  * pulse to determine when to switch to an OS-absent mode. */
-#define DRV_PULSE_PERIOD_MS                 250
+#define BNX2_DRV_PULSE_PERIOD_MS                 250
 
 /* This value (in milliseconds) determines how long the driver should
  * wait for an acknowledgement from the firmware before timing out.  Once
  * the firmware has timed out, the driver will assume there is no firmware
  * running and there won't be any firmware-driver synchronization during a
  * driver reset. */
-#define FW_ACK_TIME_OUT_MS                  1000
+#define BNX2_FW_ACK_TIME_OUT_MS                  1000
 
 
 #define BNX2_DRV_RESET_SIGNATURE               0x00000000