module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
-int noacpi;
-module_param(noacpi, int, 0444);
+int libata_noacpi = 1;
+module_param_named(noacpi, libata_noacpi, int, 0444);
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set");
MODULE_AUTHOR("Jeff Garzik");
/**
* ata_id_to_dma_mode - Identify DMA mode from id block
* @dev: device to identify
- * @mode: mode to assume if we cannot tell
+ * @unknown: mode to assume if we cannot tell
*
* Set up the timing values for the device based upon the identify
* reported values for the DMA mode. This function is used by drivers
dev->max_sectors = ATA_MAX_SECTORS;
}
+ if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+ dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors);
+
+ /* limit ATAPI DMA to R/W commands only */
+ if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY)
+ dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY;
+
if (ap->ops->dev_config)
- ap->ops->dev_config(ap, dev);
+ ap->ops->dev_config(dev);
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
for (i = 0; i < ATA_MAX_DEVICES; i++)
ap->device[i].pio_mode = XFER_PIO_0;
- /* read IDENTIFY page and configure devices */
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ /* read IDENTIFY page and configure devices. We have to do the identify
+ specific sequence bass-ackwards so that PDIAG- is released by
+ the slave device */
+
+ for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) {
dev = &ap->device[i];
if (tries[i])
dev->id);
if (rc)
goto fail;
+ }
+
+ /* After the identify sequence we can now set up the devices. We do
+ this in the normal order so that the user doesn't get confused */
+
+ for(i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+ if (!ata_dev_enabled(dev))
+ continue;
ap->eh_context.i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
* LOCKING:
* None.
*/
-static void sata_print_link_status(struct ata_port *ap)
+void sata_print_link_status(struct ata_port *ap)
{
u32 sstatus, scontrol, tmp;
* host channels are not permitted to do so.
*/
if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
- ap->host->simplex_claimed = 1;
+ ap->host->simplex_claimed = ap;
/* step5: chip specific finalisation */
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
-
out:
if (rc)
*r_failed_dev = dev;
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
+ /* Weird ATAPI devices */
+ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 |
+ ATA_HORKAGE_DMA_RW_ONLY },
+
/* Devices we expect to fail diagnostics */
/* Devices where NCQ should be avoided */
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
+ /* NCQ is broken */
+ { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
+ /* NCQ hard hangs device under heavier load, needs hard power cycle */
+ { "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ },
+ /* Blacklist entries taken from Silicon Image 3124/3132
+ Windows driver .inf file - also several Linux problem reports */
+ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
+ { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
+ { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
"device is on DMA blacklist, disabling DMA\n");
}
- if ((host->flags & ATA_HOST_SIMPLEX) && host->simplex_claimed) {
+ if ((host->flags & ATA_HOST_SIMPLEX) &&
+ host->simplex_claimed && host->simplex_claimed != ap) {
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by "
"other device, disabling DMA\n");
struct ata_port *ap = qc->ap;
int rc = 0; /* Assume ATAPI DMA is OK by default */
+ /* some drives can only do ATAPI DMA on read/write */
+ if (unlikely(qc->dev->horkage & ATA_HORKAGE_DMA_RW_ONLY)) {
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ u8 *scsicmd = cmd->cmnd;
+
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ /* atapi dma maybe ok */
+ break;
+ default:
+ /* turn off atapi dma */
+ return 1;
+ }
+ }
+
if (ap->ops->check_atapi_dma)
rc = ap->ops->check_atapi_dma(qc);
{
struct ata_port *ap = qc->ap;
- ap->ops->tf_read(ap, &qc->result_tf);
qc->result_tf.flags = qc->tf.flags;
+ ap->ops->tf_read(ap, &qc->result_tf);
}
/**
return 0;
}
+#ifdef CONFIG_PM
static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
unsigned int action, unsigned int ehi_flags,
int wait)
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
host->dev->power.power_state = PMSG_ON;
}
+#endif
/**
* ata_port_start - Set port up for dma.
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- if (!ap)
- continue;
-
- if (ap->ops->port_stop)
+ if (ap && ap->ops->port_stop)
ap->ops->port_stop(ap);
-
- scsi_host_put(ap->scsi_host);
}
if (host->ops->host_stop)
host->ops->host_stop(host);
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (ap)
+ scsi_host_put(ap->scsi_host);
+
+ host->ports[i] = NULL;
+ }
+
dev_set_drvdata(gendev, NULL);
}
return (tmp == bits->val) ? 1 : 0;
}
+#ifdef CONFIG_PM
void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
pci_save_state(pdev);
ata_host_resume(host);
return rc;
}
+#endif /* CONFIG_PM */
+
#endif /* CONFIG_PCI */
EXPORT_SYMBOL_GPL(ata_tf_read);
EXPORT_SYMBOL_GPL(ata_noop_dev_select);
EXPORT_SYMBOL_GPL(ata_std_dev_select);
+EXPORT_SYMBOL_GPL(sata_print_link_status);
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(sata_scr_write_flush);
EXPORT_SYMBOL_GPL(ata_port_online);
EXPORT_SYMBOL_GPL(ata_port_offline);
+#ifdef CONFIG_PM
EXPORT_SYMBOL_GPL(ata_host_suspend);
EXPORT_SYMBOL_GPL(ata_host_resume);
+#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
+#ifdef CONFIG_PM
EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_resume);
+#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_pci_default_filter);
EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
#endif /* CONFIG_PCI */
+#ifdef CONFIG_PM
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
+#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
projects / linux.git / blobdiff