*/
-static const char versionA[] =
+static const char version[] =
-static const char versionB[] =
-" http://www.scyld.com/network/atp.html\n";
/* The user-configurable values.
These may be modified when a driver module is loaded.*/
struct net_local {
spinlock_t lock;
struct net_device *next_module;
- struct net_device_stats stats;
struct timer_list timer; /* Media selection timer. */
long last_rx_time; /* Last Rx, in jiffies, to handle Rx hang. */
int saved_tx_size;
static void net_rx(struct net_device *dev);
static void read_block(long ioaddr, int length, unsigned char *buffer, int data_mode);
static int net_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
static void set_rx_mode_8002(struct net_device *dev);
static void set_rx_mode_8012(struct net_device *dev);
static void tx_timeout(struct net_device *dev);
struct net_local *lp;
int saved_ctrl_reg, status, i;
int res;
+ DECLARE_MAC_BUF(mac);
outb(0xff, ioaddr + PAR_DATA);
/* Save the original value of the Control register, in case we guessed
dev = alloc_etherdev(sizeof(struct net_local));
if (!dev)
return -ENOMEM;
- SET_MODULE_OWNER(dev);
/* Find the IRQ used by triggering an interrupt. */
write_reg_byte(ioaddr, CMR2, 0x01); /* No accept mode, IRQ out. */
#ifndef MODULE
if (net_debug)
- printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+ printk(KERN_INFO "%s", version);
#endif
- printk(KERN_NOTICE "%s: Pocket adapter found at %#3lx, IRQ %d, SAPROM "
- "%02X:%02X:%02X:%02X:%02X:%02X.\n", dev->name, dev->base_addr,
- dev->irq, dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ printk(KERN_NOTICE "%s: Pocket adapter found at %#3lx, IRQ %d, "
+ "SAPROM %s.\n",
+ dev->name, dev->base_addr, dev->irq, print_mac(mac, dev->dev_addr));
/* Reset the ethernet hardware and activate the printer pass-through. */
write_reg_high(ioaddr, CMR1, CMR1h_RESET | CMR1h_MUX);
dev->open = net_open;
dev->stop = net_close;
dev->hard_start_xmit = atp_send_packet;
- dev->get_stats = net_get_stats;
dev->set_multicast_list =
lp->chip_type == RTL8002 ? &set_rx_mode_8002 : &set_rx_mode_8012;
dev->tx_timeout = tx_timeout;
static void tx_timeout(struct net_device *dev)
{
- struct net_local *np = netdev_priv(dev);
long ioaddr = dev->base_addr;
printk(KERN_WARNING "%s: Transmit timed out, %s?\n", dev->name,
inb(ioaddr + PAR_CONTROL) & 0x10 ? "network cable problem"
: "IRQ conflict");
- np->stats.tx_errors++;
+ dev->stats.tx_errors++;
/* Try to restart the adapter. */
hardware_init(dev);
dev->trans_start = jiffies;
netif_wake_queue(dev);
- np->stats.tx_errors++;
+ dev->stats.tx_errors++;
}
static int atp_send_packet(struct sk_buff *skb, struct net_device *dev)
/* We acknowledged the normal Rx interrupt, so if the interrupt
is still outstanding we must have a Rx error. */
if (read_status & (CMR1_IRQ << 3)) { /* Overrun. */
- lp->stats.rx_over_errors++;
+ dev->stats.rx_over_errors++;
/* Set to no-accept mode long enough to remove a packet. */
write_reg_high(ioaddr, CMR2, CMR2h_OFF);
net_rx(dev);
and reinitialize the adapter. */
write_reg(ioaddr, ISR, ISR_TxErr + ISR_TxOK);
if (status & (ISR_TxErr<<3)) {
- lp->stats.collisions++;
+ dev->stats.collisions++;
if (++lp->re_tx > 15) {
- lp->stats.tx_aborted_errors++;
+ dev->stats.tx_aborted_errors++;
hardware_init(dev);
break;
}
write_reg(ioaddr, CMR1, CMR1_ReXmit + CMR1_Xmit);
} else {
/* Finish up the transmit. */
- lp->stats.tx_packets++;
+ dev->stats.tx_packets++;
lp->pac_cnt_in_tx_buf--;
if ( lp->saved_tx_size) {
trigger_send(ioaddr, lp->saved_tx_size);
"%ld jiffies status %02x CMR1 %02x.\n", dev->name,
num_tx_since_rx, jiffies - dev->last_rx, status,
(read_nibble(ioaddr, CMR1) >> 3) & 15);
- lp->stats.rx_missed_errors++;
+ dev->stats.rx_missed_errors++;
hardware_init(dev);
num_tx_since_rx = 0;
break;
struct net_local *lp = netdev_priv(atp_timed_dev);
write_reg_byte(ioaddr, PAR0 + i, atp_timed_dev->dev_addr[i]);
if (i == 2)
- lp->stats.tx_errors++;
+ dev->stats.tx_errors++;
else if (i == 3)
- lp->stats.tx_dropped++;
+ dev->stats.tx_dropped++;
else if (i == 4)
- lp->stats.collisions++;
+ dev->stats.collisions++;
else
- lp->stats.rx_errors++;
+ dev->stats.rx_errors++;
}
#endif
}
printk(KERN_DEBUG " rx_count %04x %04x %04x %04x..", rx_head.pad,
rx_head.rx_count, rx_head.rx_status, rx_head.cur_addr);
if ((rx_head.rx_status & 0x77) != 0x01) {
- lp->stats.rx_errors++;
- if (rx_head.rx_status & 0x0004) lp->stats.rx_frame_errors++;
- else if (rx_head.rx_status & 0x0002) lp->stats.rx_crc_errors++;
+ dev->stats.rx_errors++;
+ if (rx_head.rx_status & 0x0004) dev->stats.rx_frame_errors++;
+ else if (rx_head.rx_status & 0x0002) dev->stats.rx_crc_errors++;
if (net_debug > 3)
printk(KERN_DEBUG "%s: Unknown ATP Rx error %04x.\n",
dev->name, rx_head.rx_status);
if (rx_head.rx_status & 0x0020) {
- lp->stats.rx_fifo_errors++;
+ dev->stats.rx_fifo_errors++;
write_reg_high(ioaddr, CMR1, CMR1h_TxENABLE);
write_reg_high(ioaddr, CMR1, CMR1h_RxENABLE | CMR1h_TxENABLE);
} else if (rx_head.rx_status & 0x0050)
if (skb == NULL) {
printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n",
dev->name);
- lp->stats.rx_dropped++;
+ dev->stats.rx_dropped++;
goto done;
}
- skb->dev = dev;
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
read_block(ioaddr, pkt_len, skb_put(skb,pkt_len), dev->if_port);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
}
done:
write_reg(ioaddr, CMR1, CMR1_NextPkt);
return 0;
}
-/* Get the current statistics. This may be called with the card open or
- closed. */
-static struct net_device_stats *
-net_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- return &lp->stats;
-}
-
/*
* Set or clear the multicast filter for this adapter.
*/
static int __init atp_init_module(void) {
if (debug) /* Emit version even if no cards detected. */
- printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+ printk(KERN_INFO "%s", version);
return atp_init();
}