netxen: protect device reset by rtnl_lock

[linux.git] / drivers / net / lance.c

diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index dcda30338b65bfb9d9fb70930b5d0e4d266c8849..8d7d3d4625f63872a973e6f79edbb9b147978ca7 100644 (file)
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -493,14 +493,14 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int
                static const short ioaddr_table[] = { 0x300, 0x320, 0x340, 0x360};
                int hp_port = (readl(bios + 1) & 1)  ? 0x499 : 0x99;
                /* We can have boards other than the built-in!  Verify this is on-board. */
-               if ((inb(hp_port) & 0xc0) == 0x80
-                       && ioaddr_table[inb(hp_port) & 3] == ioaddr)
+               if ((inb(hp_port) & 0xc0) == 0x80 &&
+                   ioaddr_table[inb(hp_port) & 3] == ioaddr)
                        hp_builtin = hp_port;
        }
        iounmap(bios);
        /* We also recognize the HP Vectra on-board here, but check below. */
-       hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00
-                               && inb(ioaddr+2) == 0x09);
+       hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00 &&
+                   inb(ioaddr+2) == 0x09);
 
        /* Reset the LANCE.      */
        reset_val = inw(ioaddr+LANCE_RESET); /* Reset the LANCE */
@@ -755,7 +755,7 @@ lance_open(struct net_device *dev)
        int i;
 
        if (dev->irq == 0 ||
-               request_irq(dev->irq, &lance_interrupt, 0, lp->name, dev)) {
+               request_irq(dev->irq, lance_interrupt, 0, lp->name, dev)) {
                return -EAGAIN;
        }
 
@@ -1035,8 +1035,8 @@ static irqreturn_t lance_interrupt(int irq, void *dev_id)
        spin_lock (&lp->devlock);
 
        outw(0x00, dev->base_addr + LANCE_ADDR);
-       while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600
-                  && --boguscnt >= 0) {
+       while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600 &&
+              --boguscnt >= 0) {
                /* Acknowledge all of the current interrupt sources ASAP. */
                outw(csr0 & ~0x004f, dev->base_addr + LANCE_DATA);