*/
-#include <linux/debugfs.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/of_device.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-
#include "mtu3.h"
#include "mtu3_dr.h"
+#include "mtu3_debug.h"
#define USB2_PORT 2
#define USB3_PORT 3
MTU3_VBUS_VALID,
};
+static char *mailbox_state_string(enum mtu3_vbus_id_state state)
+{
+ switch (state) {
+ case MTU3_ID_FLOAT:
+ return "ID_FLOAT";
+ case MTU3_ID_GROUND:
+ return "ID_GROUND";
+ case MTU3_VBUS_OFF:
+ return "VBUS_OFF";
+ case MTU3_VBUS_VALID:
+ return "VBUS_VALID";
+ default:
+ return "UNKNOWN";
+ }
+}
+
static void toggle_opstate(struct ssusb_mtk *ssusb)
{
if (!ssusb->otg_switch.is_u3_drd) {
container_of(otg_sx, struct ssusb_mtk, otg_switch);
struct mtu3 *mtu = ssusb->u3d;
- dev_dbg(ssusb->dev, "mailbox state(%d)\n", status);
+ dev_dbg(ssusb->dev, "mailbox %s\n", mailbox_state_string(status));
+ mtu3_dbg_trace(ssusb->dev, "mailbox %s", mailbox_state_string(status));
switch (status) {
case MTU3_ID_GROUND:
otg_sx->vbus_nb.notifier_call = ssusb_vbus_notifier;
ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB,
&otg_sx->vbus_nb);
- if (ret < 0)
+ if (ret < 0) {
dev_err(ssusb->dev, "failed to register notifier for USB\n");
+ return ret;
+ }
otg_sx->id_nb.notifier_call = ssusb_id_notifier;
ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST,
&otg_sx->id_nb);
- if (ret < 0)
+ if (ret < 0) {
dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n");
+ return ret;
+ }
dev_dbg(ssusb->dev, "EXTCON_USB: %d, EXTCON_USB_HOST: %d\n",
extcon_get_state(edev, EXTCON_USB),
* This is useful in special cases, such as uses TYPE-A receptacle but also
* wants to support dual-role mode.
*/
-static void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
+void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
}
}
-static int ssusb_mode_show(struct seq_file *sf, void *unused)
-{
- struct ssusb_mtk *ssusb = sf->private;
-
- seq_printf(sf, "current mode: %s(%s drd)\n(echo device/host)\n",
- ssusb->is_host ? "host" : "device",
- ssusb->otg_switch.manual_drd_enabled ? "manual" : "auto");
-
- return 0;
-}
-
-static int ssusb_mode_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ssusb_mode_show, inode->i_private);
-}
-
-static ssize_t ssusb_mode_write(struct file *file,
- const char __user *ubuf, size_t count, loff_t *ppos)
-{
- struct seq_file *sf = file->private_data;
- struct ssusb_mtk *ssusb = sf->private;
- char buf[16];
-
- if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
- return -EFAULT;
-
- if (!strncmp(buf, "host", 4) && !ssusb->is_host) {
- ssusb_mode_manual_switch(ssusb, 1);
- } else if (!strncmp(buf, "device", 6) && ssusb->is_host) {
- ssusb_mode_manual_switch(ssusb, 0);
- } else {
- dev_err(ssusb->dev, "wrong or duplicated setting\n");
- return -EINVAL;
- }
-
- return count;
-}
-
-static const struct file_operations ssusb_mode_fops = {
- .open = ssusb_mode_open,
- .write = ssusb_mode_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int ssusb_vbus_show(struct seq_file *sf, void *unused)
-{
- struct ssusb_mtk *ssusb = sf->private;
- struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-
- seq_printf(sf, "vbus state: %s\n(echo on/off)\n",
- regulator_is_enabled(otg_sx->vbus) ? "on" : "off");
-
- return 0;
-}
-
-static int ssusb_vbus_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ssusb_vbus_show, inode->i_private);
-}
-
-static ssize_t ssusb_vbus_write(struct file *file,
- const char __user *ubuf, size_t count, loff_t *ppos)
-{
- struct seq_file *sf = file->private_data;
- struct ssusb_mtk *ssusb = sf->private;
- struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
- char buf[16];
- bool enable;
-
- if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
- return -EFAULT;
-
- if (kstrtobool(buf, &enable)) {
- dev_err(ssusb->dev, "wrong setting\n");
- return -EINVAL;
- }
-
- ssusb_set_vbus(otg_sx, enable);
-
- return count;
-}
-
-static const struct file_operations ssusb_vbus_fops = {
- .open = ssusb_vbus_open,
- .write = ssusb_vbus_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static void ssusb_debugfs_init(struct ssusb_mtk *ssusb)
-{
- struct dentry *root;
-
- root = debugfs_create_dir(dev_name(ssusb->dev), usb_debug_root);
- ssusb->dbgfs_root = root;
-
- debugfs_create_file("mode", 0644, root, ssusb, &ssusb_mode_fops);
- debugfs_create_file("vbus", 0644, root, ssusb, &ssusb_vbus_fops);
-}
-
-static void ssusb_debugfs_exit(struct ssusb_mtk *ssusb)
-{
- debugfs_remove_recursive(ssusb->dbgfs_root);
-}
-
void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
enum mtu3_dr_force_mode mode)
{
int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+ int ret = 0;
INIT_WORK(&otg_sx->id_work, ssusb_id_work);
INIT_WORK(&otg_sx->vbus_work, ssusb_vbus_work);
if (otg_sx->manual_drd_enabled)
- ssusb_debugfs_init(ssusb);
+ ssusb_dr_debugfs_init(ssusb);
else
- ssusb_extcon_register(otg_sx);
+ ret = ssusb_extcon_register(otg_sx);
- return 0;
+ return ret;
}
void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
- if (otg_sx->manual_drd_enabled)
- ssusb_debugfs_exit(ssusb);
-
cancel_work_sync(&otg_sx->id_work);
cancel_work_sync(&otg_sx->vbus_work);
}
projects / linux.git / blobdiff