tools/bpftool: Add ringbuf map to a list of known map types

[linux.git] / drivers / pwm / pwm-tegra.c

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index d26ed8f579ff0b5cdd2fc8bb646955f00bed7f3e..1daf591025c0001539915348e4fbbf2d32ea00d7 100644 (file)
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -4,8 +4,36 @@
  *
  * Tegra pulse-width-modulation controller driver
  *
  *
  * Tegra pulse-width-modulation controller driver
  *

- * Copyright (c) 2010, NVIDIA Corporation.
+ * Copyright (c) 2010-2020, NVIDIA Corporation.

  * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <[email protected]>
  * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <[email protected]>

+ *
+ * Overview of Tegra Pulse Width Modulator Register:
+ * 1. 13-bit: Frequency division (SCALE)
+ * 2. 8-bit : Pulse division (DUTY)
+ * 3. 1-bit : Enable bit
+ *
+ * The PWM clock frequency is divided by 256 before subdividing it based
+ * on the programmable frequency division value to generate the required
+ * frequency for PWM output. The maximum output frequency that can be
+ * achieved is (max rate of source clock) / 256.
+ * e.g. if source clock rate is 408 MHz, maximum output frequency can be:
+ * 408 MHz/256 = 1.6 MHz.
+ * This 1.6 MHz frequency can further be divided using SCALE value in PWM.
+ *
+ * PWM pulse width: 8 bits are usable [23:16] for varying pulse width.
+ * To achieve 100% duty cycle, program Bit [24] of this register to
+ * 1’b1. In which case the other bits [23:16] are set to don't care.
+ *
+ * Limitations:
+ * -   When PWM is disabled, the output is driven to inactive.
+ * -   It does not allow the current PWM period to complete and
+ *     stops abruptly.
+ *
+ * -   If the register is reconfigured while PWM is running,
+ *     it does not complete the currently running period.
+ *
+ * -   If the user input duty is beyond acceptible limits,
+ *     -EINVAL is returned.

  */
 
 #include <linux/clk.h>
  */
 
 #include <linux/clk.h>


@@ -41,6 +69,7 @@ struct tegra_pwm_chip {
        struct reset_control*rst;
 
        unsigned long clk_rate;
        struct reset_control*rst;
 
        unsigned long clk_rate;

+       unsigned long min_period_ns;

 
        void __iomem *regs;
 
 
        void __iomem *regs;
 


@@ -68,7 +97,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 {
        struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
        unsigned long long c = duty_ns, hz;
 {
        struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
        unsigned long long c = duty_ns, hz;

-       unsigned long rate;
+       unsigned long rate, required_clk_rate;

        u32 val = 0;
        int err;
 
        u32 val = 0;
        int err;
 


@@ -82,10 +111,48 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 
        val = (u32)c << PWM_DUTY_SHIFT;
 
 
        val = (u32)c << PWM_DUTY_SHIFT;
 

+       /*
+        *  min period = max clock limit >> PWM_DUTY_WIDTH
+        */
+       if (period_ns < pc->min_period_ns)
+               return -EINVAL;
+

        /*
         * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH)
         * cycles at the PWM clock rate will take period_ns nanoseconds.
        /*
         * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH)
         * cycles at the PWM clock rate will take period_ns nanoseconds.

+        *
+        * num_channels: If single instance of PWM controller has multiple
+        * channels (e.g. Tegra210 or older) then it is not possible to
+        * configure separate clock rates to each of the channels, in such
+        * case the value stored during probe will be referred.
+        *
+        * If every PWM controller instance has one channel respectively, i.e.
+        * nums_channels == 1 then only the clock rate can be modified
+        * dynamically (e.g. Tegra186 or Tegra194).

         */
         */

+       if (pc->soc->num_channels == 1) {
+               /*
+                * Rate is multiplied with 2^PWM_DUTY_WIDTH so that it matches
+                * with the maximum possible rate that the controller can
+                * provide. Any further lower value can be derived by setting
+                * PFM bits[0:12].
+                *
+                * required_clk_rate is a reference rate for source clock and
+                * it is derived based on user requested period. By setting the
+                * source clock rate as required_clk_rate, PWM controller will
+                * be able to configure the requested period.
+                */
+               required_clk_rate =
+                       (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH;
+
+               err = clk_set_rate(pc->clk, required_clk_rate);
+               if (err < 0)
+                       return -EINVAL;
+
+               /* Store the new rate for further references */
+               pc->clk_rate = clk_get_rate(pc->clk);
+       }
+

        rate = pc->clk_rate >> PWM_DUTY_WIDTH;
 
        /* Consider precision in PWM_SCALE_WIDTH rate calculation */
        rate = pc->clk_rate >> PWM_DUTY_WIDTH;
 
        /* Consider precision in PWM_SCALE_WIDTH rate calculation */


@@ -94,7 +161,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 
        /*
         * Since the actual PWM divider is the register's frequency divider
 
        /*
         * Since the actual PWM divider is the register's frequency divider

-        * field minus 1, we need to decrement to get the correct value to
+        * field plus 1, we need to decrement to get the correct value to

         * write to the register.
         */
        if (rate > 0)
         * write to the register.
         */
        if (rate > 0)


@@ -205,6 +272,10 @@ static int tegra_pwm_probe(struct platform_device *pdev)
         */
        pwm->clk_rate = clk_get_rate(pwm->clk);
 
         */
        pwm->clk_rate = clk_get_rate(pwm->clk);
 

+       /* Set minimum limit of PWM period for the IP */
+       pwm->min_period_ns =
+           (NSEC_PER_SEC / (pwm->soc->max_frequency >> PWM_DUTY_WIDTH)) + 1;
+

        pwm->rst = devm_reset_control_get_exclusive(&pdev->dev, "pwm");
        if (IS_ERR(pwm->rst)) {
                ret = PTR_ERR(pwm->rst);
        pwm->rst = devm_reset_control_get_exclusive(&pdev->dev, "pwm");
        if (IS_ERR(pwm->rst)) {
                ret = PTR_ERR(pwm->rst);


@@ -312,5 +383,6 @@ static struct platform_driver tegra_pwm_driver = {
 module_platform_driver(tegra_pwm_driver);
 
 MODULE_LICENSE("GPL");
 module_platform_driver(tegra_pwm_driver);
 
 MODULE_LICENSE("GPL");

-MODULE_AUTHOR("NVIDIA Corporation");
+MODULE_AUTHOR("Sandipan Patra <[email protected]>");
+MODULE_DESCRIPTION("Tegra PWM controller driver");

 MODULE_ALIAS("platform:tegra-pwm");
 MODULE_ALIAS("platform:tegra-pwm");