#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.6"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- ATA_FLAG_NO_ATAPI),
+ ATA_FLAG_PIO_POLLING),
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
CRQB_FLAG_READ = (1 << 0),
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_50XX = (1 << 5),
+ MV_HP_ERRATA_XX42A0 = (1 << 5),
+ MV_HP_50XX = (1 << 6),
+ MV_HP_GEN_IIE = (1 << 7),
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0),
#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
+#define IS_GEN_I(hpriv) IS_50XX(hpriv)
+#define IS_GEN_II(hpriv) IS_60XX(hpriv)
+#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
enum {
/* Our DMA boundary is determined by an ePRD being unable to handle
chip_5080,
chip_604x,
chip_608x,
+ chip_6042,
+ chip_7042,
};
/* Command ReQuest Block: 32B */
u16 ata_cmd[11];
};
+struct mv_crqb_iie {
+ u32 addr;
+ u32 addr_hi;
+ u32 flags;
+ u32 len;
+ u32 ata_cmd[4];
+};
+
/* Command ResPonse Block: 8B */
struct mv_crpb {
u16 id;
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
static void mv_qc_prep(struct ata_queued_cmd *qc);
-static int mv_qc_issue(struct ata_queued_cmd *qc);
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
+static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs);
static void mv_eng_timeout(struct ata_port *ap);
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = MV_USE_Q_DEPTH,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = MV_MAX_SG_CT / 2,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.host_stop = mv_host_stop,
};
+static const struct ata_port_operations mv_iie_ops = {
+ .port_disable = ata_port_disable,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .phy_reset = mv_phy_reset,
+
+ .qc_prep = mv_qc_prep_iie,
+ .qc_issue = mv_qc_issue,
+
+ .eng_timeout = mv_eng_timeout,
+
+ .irq_handler = mv_interrupt,
+ .irq_clear = mv_irq_clear,
+
+ .scr_read = mv_scr_read,
+ .scr_write = mv_scr_write,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+ .host_stop = mv_host_stop,
+};
+
static const struct ata_port_info mv_port_info[] = {
{ /* chip_504x */
.sht = &mv_sht,
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv6_ops,
},
+ { /* chip_6042 */
+ .sht = &mv_sht,
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv_iie_ops,
+ },
+ { /* chip_7042 */
+ .sht = &mv_sht,
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv_iie_ops,
+ },
};
static const struct pci_device_id mv_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
+ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
.reset_bus = mv_reset_pci_bus,
};
+/*
+ * module options
+ */
+static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
+
+
/*
* Functions
*/
* @base: port base address
* @pp: port private data
*
- * Verify the local cache of the eDMA state is accurate with an
- * assert.
+ * Verify the local cache of the eDMA state is accurate with a
+ * WARN_ON.
*
* LOCKING:
* Inherited from caller.
writelfl(EDMA_EN, base + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
}
- assert(EDMA_EN & readl(base + EDMA_CMD_OFS));
+ WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS)));
}
/**
* mv_stop_dma - Disable eDMA engine
* @ap: ATA channel to manipulate
*
- * Verify the local cache of the eDMA state is accurate with an
- * assert.
+ * Verify the local cache of the eDMA state is accurate with a
+ * WARN_ON.
*
* LOCKING:
* Inherited from caller.
writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
} else {
- assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
+ WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
}
/* now properly wait for the eDMA to stop */
dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
}
+static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
+{
+ u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
+
+ /* set up non-NCQ EDMA configuration */
+ cfg &= ~0x1f; /* clear queue depth */
+ cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */
+ cfg &= ~(1 << 9); /* disable equeue */
+
+ if (IS_GEN_I(hpriv))
+ cfg |= (1 << 8); /* enab config burst size mask */
+
+ else if (IS_GEN_II(hpriv))
+ cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+
+ else if (IS_GEN_IIE(hpriv)) {
+ cfg |= (1 << 23); /* dis RX PM port mask */
+ cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
+ cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
+ cfg |= (1 << 18); /* enab early completion */
+ cfg |= (1 << 17); /* enab host q cache */
+ cfg |= (1 << 22); /* enab cutthrough */
+ }
+
+ writelfl(cfg, port_mmio + EDMA_CFG_OFS);
+}
+
/**
* mv_port_start - Port specific init/start routine.
* @ap: ATA channel to manipulate
static int mv_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
+ struct mv_host_priv *hpriv = ap->host_set->private_data;
struct mv_port_priv *pp;
void __iomem *port_mmio = mv_ap_base(ap);
void *mem;
pp->sg_tbl = mem;
pp->sg_tbl_dma = mem_dma;
- writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
- EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
+ mv_edma_cfg(hpriv, port_mmio);
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
- writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl(pp->crqb_dma & 0xffffffff,
+ port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ else
+ writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl(pp->crpb_dma & 0xffffffff,
+ port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ else
+ writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
struct ata_taskfile *tf;
u16 flags = 0;
- if (ATA_PROT_DMA != qc->tf.protocol) {
+ if (ATA_PROT_DMA != qc->tf.protocol)
return;
- }
/* the req producer index should be the same as we remember it */
- assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->req_producer);
+ WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->req_producer);
/* Fill in command request block
*/
- if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
- }
- assert(MV_MAX_Q_DEPTH > qc->tag);
+ WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
pp->crqb[pp->req_producer].sg_addr =
case ATA_CMD_READ_EXT:
case ATA_CMD_WRITE:
case ATA_CMD_WRITE_EXT:
+ case ATA_CMD_WRITE_FUA_EXT:
mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0);
break;
#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */
mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
- if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_qc_prep_iie - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_crqb_iie *crqb;
+ struct ata_taskfile *tf;
+ u32 flags = 0;
+
+ if (ATA_PROT_DMA != qc->tf.protocol)
+ return;
+
+ /* the req producer index should be the same as we remember it */
+ WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->req_producer);
+
+ /* Fill in Gen IIE command request block
+ */
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ flags |= CRQB_FLAG_READ;
+
+ WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+
+ crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+ crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ crqb->flags = cpu_to_le32(flags);
+
+ tf = &qc->tf;
+ crqb->ata_cmd[0] = cpu_to_le32(
+ (tf->command << 16) |
+ (tf->feature << 24)
+ );
+ crqb->ata_cmd[1] = cpu_to_le32(
+ (tf->lbal << 0) |
+ (tf->lbam << 8) |
+ (tf->lbah << 16) |
+ (tf->device << 24)
+ );
+ crqb->ata_cmd[2] = cpu_to_le32(
+ (tf->hob_lbal << 0) |
+ (tf->hob_lbam << 8) |
+ (tf->hob_lbah << 16) |
+ (tf->hob_feature << 24)
+ );
+ crqb->ata_cmd[3] = cpu_to_le32(
+ (tf->nsect << 0) |
+ (tf->hob_nsect << 8)
+ );
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
- }
mv_fill_sg(qc);
}
* LOCKING:
* Inherited from caller.
*/
-static int mv_qc_issue(struct ata_queued_cmd *qc)
+static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
{
void __iomem *port_mmio = mv_ap_base(qc->ap);
struct mv_port_priv *pp = qc->ap->private_data;
in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
/* the req producer index should be the same as we remember it */
- assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->req_producer);
+ WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->req_producer);
/* until we do queuing, the queue should be empty at this point */
- assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+ WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
mv_inc_q_index(&pp->req_producer); /* now incr producer index */
*
* This routine is for use when the port is in DMA mode, when it
* will be using the CRPB (command response block) method of
- * returning command completion information. We assert indices
+ * returning command completion information. We check indices
* are good, grab status, and bump the response consumer index to
* prove that we're up to date.
*
out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
/* the response consumer index should be the same as we remember it */
- assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->rsp_consumer);
+ WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->rsp_consumer);
/* increment our consumer index... */
pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
/* and, until we do NCQ, there should only be 1 CRPB waiting */
- assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
- EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->rsp_consumer);
+ WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
+ EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->rsp_consumer);
/* write out our inc'd consumer index so EDMA knows we're caught up */
out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
handled++;
}
- if (ap &&
- (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR)))
+ if (ap && (ap->flags & ATA_FLAG_PORT_DISABLED))
continue;
err_mask = ac_err_mask(ata_status);
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
/* mark qc status appropriately */
- if (!(qc->tf.ctl & ATA_NIEN)) {
+ if (!(qc->tf.flags & ATA_TFLAG_POLLING)) {
qc->err_mask |= err_mask;
ata_qc_complete(qc);
}
m2 |= hpriv->signal[port].pre;
m2 &= ~(1 << 16);
+ /* according to mvSata 3.6.1, some IIE values are fixed */
+ if (IS_GEN_IIE(hpriv)) {
+ m2 &= ~0xC30FF01F;
+ m2 |= 0x0000900F;
+ }
+
writel(m2, port_mmio + PHY_MODE2);
}
static void mv_eng_timeout(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
- unsigned long flags;
printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
DPRINTK("All regs @ start of eng_timeout\n");
mv_err_intr(ap);
mv_stop_and_reset(ap);
- if (!qc) {
- printk(KERN_ERR "ata%u: BUG: timeout without command\n",
- ap->id);
- } else {
- /* hack alert! We cannot use the supplied completion
- * function from inside the ->eh_strategy_handler() thread.
- * libata is the only user of ->eh_strategy_handler() in
- * any kernel, so the default scsi_done() assumes it is
- * not being called from the SCSI EH.
- */
- spin_lock_irqsave(&ap->host_set->lock, flags);
- qc->scsidone = scsi_finish_command;
- qc->err_mask |= AC_ERR_OTHER;
- ata_qc_complete(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
- }
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ata_eh_qc_complete(qc);
}
/**
}
break;
+ case chip_7042:
+ case chip_6042:
+ hpriv->ops = &mv6xxx_ops;
+
+ hp_flags |= MV_HP_GEN_IIE;
+
+ switch (rev_id) {
+ case 0x0:
+ hp_flags |= MV_HP_ERRATA_XX42A0;
+ break;
+ case 0x1:
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ default:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "Applying 60X1C0 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ }
+ break;
+
default:
printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
return 1;
}
/* Enable interrupts */
- if (pci_enable_msi(pdev) == 0) {
+ if (msi && pci_enable_msi(pdev) == 0) {
hpriv->hp_flags |= MV_HP_FLAG_MSI;
} else {
pci_intx(pdev, 1);
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+module_param(msi, int, 0444);
+MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+
module_init(mv_init);
module_exit(mv_exit);
projects / linux.git / blobdiff