drivers/net/phy/smsc.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * drivers/net/phy/smsc.c
   4  *
   5  * Driver for SMSC PHYs
   6  *
   7  * Author: Herbert Valerio Riedel
   8  *
   9  * Copyright (c) 2006 Herbert Valerio Riedel <[email protected]>
  10  *
  11  * Support added for SMSC LAN8187 and LAN8700 by [email protected]
  12  *
  13  */
  14
  15 #include <linux/clk.h>
  16 #include <linux/kernel.h>
  17 #include <linux/module.h>
  18 #include <linux/mii.h>
  19 #include <linux/ethtool.h>
  20 #include <linux/of.h>
  21 #include <linux/phy.h>
  22 #include <linux/netdevice.h>
  23 #include <linux/smscphy.h>
  24
  25 /* Vendor-specific PHY Definitions */
  26 /* EDPD NLP / crossover time configuration */
  27 #define PHY_EDPD_CONFIG                 16
  28 #define PHY_EDPD_CONFIG_EXT_CROSSOVER_  0x0001
  29
  30 /* Control/Status Indication Register */
  31 #define SPECIAL_CTRL_STS                27
  32 #define SPECIAL_CTRL_STS_OVRRD_AMDIX_   0x8000
  33 #define SPECIAL_CTRL_STS_AMDIX_ENABLE_  0x4000
  34 #define SPECIAL_CTRL_STS_AMDIX_STATE_   0x2000
  35
  36 struct smsc_hw_stat {
  37         const char *string;
  38         u8 reg;
  39         u8 bits;
  40 };
  41
  42 static struct smsc_hw_stat smsc_hw_stats[] = {
  43         { "phy_symbol_errors", 26, 16},
  44 };
  45
  46 struct smsc_phy_priv {
  47         bool energy_enable;
  48         struct clk *refclk;
  49 };
  50
  51 static int smsc_phy_config_intr(struct phy_device *phydev)
  52 {
  53         struct smsc_phy_priv *priv = phydev->priv;
  54         u16 intmask = 0;
  55         int rc;
  56
  57         if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
  58                 intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6;
  59                 if (priv->energy_enable)
  60                         intmask |= MII_LAN83C185_ISF_INT7;
  61         }
  62
  63         rc = phy_write(phydev, MII_LAN83C185_IM, intmask);
  64
  65         return rc < 0 ? rc : 0;
  66 }
  67
  68 static int smsc_phy_ack_interrupt(struct phy_device *phydev)
  69 {
  70         int rc = phy_read (phydev, MII_LAN83C185_ISF);
  71
  72         return rc < 0 ? rc : 0;
  73 }
  74
  75 static int smsc_phy_config_init(struct phy_device *phydev)
  76 {
  77         struct smsc_phy_priv *priv = phydev->priv;
  78         int rc;
  79
  80         if (!priv->energy_enable)
  81                 return 0;
  82
  83         rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
  84
  85         if (rc < 0)
  86                 return rc;
  87
  88         /* Enable energy detect mode for this SMSC Transceivers */
  89         rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
  90                        rc | MII_LAN83C185_EDPWRDOWN);
  91         if (rc < 0)
  92                 return rc;
  93
  94         return smsc_phy_ack_interrupt(phydev);
  95 }
  96
  97 static int smsc_phy_reset(struct phy_device *phydev)
  98 {
  99         int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
 100         if (rc < 0)
 101                 return rc;
 102
 103         /* If the SMSC PHY is in power down mode, then set it
 104          * in all capable mode before using it.
 105          */
 106         if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
 107                 /* set "all capable" mode */
 108                 rc |= MII_LAN83C185_MODE_ALL;
 109                 phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
 110         }
 111
 112         /* reset the phy */
 113         return genphy_soft_reset(phydev);
 114 }
 115
 116 static int lan911x_config_init(struct phy_device *phydev)
 117 {
 118         return smsc_phy_ack_interrupt(phydev);
 119 }
 120
 121 static int lan87xx_config_aneg(struct phy_device *phydev)
 122 {
 123         int rc;
 124         int val;
 125
 126         switch (phydev->mdix_ctrl) {
 127         case ETH_TP_MDI:
 128                 val = SPECIAL_CTRL_STS_OVRRD_AMDIX_;
 129                 break;
 130         case ETH_TP_MDI_X:
 131                 val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
 132                         SPECIAL_CTRL_STS_AMDIX_STATE_;
 133                 break;
 134         case ETH_TP_MDI_AUTO:
 135                 val = SPECIAL_CTRL_STS_AMDIX_ENABLE_;
 136                 break;
 137         default:
 138                 return genphy_config_aneg(phydev);
 139         }
 140
 141         rc = phy_read(phydev, SPECIAL_CTRL_STS);
 142         if (rc < 0)
 143                 return rc;
 144
 145         rc &= ~(SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
 146                 SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
 147                 SPECIAL_CTRL_STS_AMDIX_STATE_);
 148         rc |= val;
 149         phy_write(phydev, SPECIAL_CTRL_STS, rc);
 150
 151         phydev->mdix = phydev->mdix_ctrl;
 152         return genphy_config_aneg(phydev);
 153 }
 154
 155 static int lan87xx_config_aneg_ext(struct phy_device *phydev)
 156 {
 157         int rc;
 158
 159         /* Extend Manual AutoMDIX timer */
 160         rc = phy_read(phydev, PHY_EDPD_CONFIG);
 161         if (rc < 0)
 162                 return rc;
 163
 164         rc |= PHY_EDPD_CONFIG_EXT_CROSSOVER_;
 165         phy_write(phydev, PHY_EDPD_CONFIG, rc);
 166         return lan87xx_config_aneg(phydev);
 167 }
 168
 169 /*
 170  * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
 171  * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
 172  * unstable detection of plugging in Ethernet cable.
 173  * This workaround disables Energy Detect Power-Down mode and waiting for
 174  * response on link pulses to detect presence of plugged Ethernet cable.
 175  * The Energy Detect Power-Down mode is enabled again in the end of procedure to
 176  * save approximately 220 mW of power if cable is unplugged.
 177  */
 178 static int lan87xx_read_status(struct phy_device *phydev)
 179 {
 180         struct smsc_phy_priv *priv = phydev->priv;
 181
 182         int err = genphy_read_status(phydev);
 183
 184         if (!phydev->link && priv->energy_enable) {
 185                 /* Disable EDPD to wake up PHY */
 186                 int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 187                 if (rc < 0)
 188                         return rc;
 189
 190                 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 191                                rc & ~MII_LAN83C185_EDPWRDOWN);
 192                 if (rc < 0)
 193                         return rc;
 194
 195                 /* Wait max 640 ms to detect energy and the timeout is not
 196                  * an actual error.
 197                  */
 198                 read_poll_timeout(phy_read, rc,
 199                                   rc & MII_LAN83C185_ENERGYON || rc < 0,
 200                                   10000, 640000, true, phydev,
 201                                   MII_LAN83C185_CTRL_STATUS);
 202                 if (rc < 0)
 203                         return rc;
 204
 205                 /* Re-enable EDPD */
 206                 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
 207                 if (rc < 0)
 208                         return rc;
 209
 210                 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
 211                                rc | MII_LAN83C185_EDPWRDOWN);
 212                 if (rc < 0)
 213                         return rc;
 214         }
 215
 216         return err;
 217 }
 218
 219 static int smsc_get_sset_count(struct phy_device *phydev)
 220 {
 221         return ARRAY_SIZE(smsc_hw_stats);
 222 }
 223
 224 static void smsc_get_strings(struct phy_device *phydev, u8 *data)
 225 {
 226         int i;
 227
 228         for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) {
 229                 strncpy(data + i * ETH_GSTRING_LEN,
 230                        smsc_hw_stats[i].string, ETH_GSTRING_LEN);
 231         }
 232 }
 233
 234 static u64 smsc_get_stat(struct phy_device *phydev, int i)
 235 {
 236         struct smsc_hw_stat stat = smsc_hw_stats[i];
 237         int val;
 238         u64 ret;
 239
 240         val = phy_read(phydev, stat.reg);
 241         if (val < 0)
 242                 ret = U64_MAX;
 243         else
 244                 ret = val;
 245
 246         return ret;
 247 }
 248
 249 static void smsc_get_stats(struct phy_device *phydev,
 250                            struct ethtool_stats *stats, u64 *data)
 251 {
 252         int i;
 253
 254         for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++)
 255                 data[i] = smsc_get_stat(phydev, i);
 256 }
 257
 258 static void smsc_phy_remove(struct phy_device *phydev)
 259 {
 260         struct smsc_phy_priv *priv = phydev->priv;
 261
 262         clk_disable_unprepare(priv->refclk);
 263         clk_put(priv->refclk);
 264 }
 265
 266 static int smsc_phy_probe(struct phy_device *phydev)
 267 {
 268         struct device *dev = &phydev->mdio.dev;
 269         struct device_node *of_node = dev->of_node;
 270         struct smsc_phy_priv *priv;
 271         int ret;
 272
 273         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 274         if (!priv)
 275                 return -ENOMEM;
 276
 277         priv->energy_enable = true;
 278
 279         if (of_property_read_bool(of_node, "smsc,disable-energy-detect"))
 280                 priv->energy_enable = false;
 281
 282         phydev->priv = priv;
 283
 284         /* Make clk optional to keep DTB backward compatibility. */
 285         priv->refclk = clk_get_optional(dev, NULL);
 286         if (IS_ERR(priv->refclk))
 287                 dev_err_probe(dev, PTR_ERR(priv->refclk), "Failed to request clock\n");
 288
 289         ret = clk_prepare_enable(priv->refclk);
 290         if (ret)
 291                 return ret;
 292
 293         ret = clk_set_rate(priv->refclk, 50 * 1000 * 1000);
 294         if (ret)
 295                 return ret;
 296
 297         return 0;
 298 }
 299
 300 static struct phy_driver smsc_phy_driver[] = {
 301 {
 302         .phy_id         = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
 303         .phy_id_mask    = 0xfffffff0,
 304         .name           = "SMSC LAN83C185",
 305
 306         /* PHY_BASIC_FEATURES */
 307
 308         .probe          = smsc_phy_probe,
 309
 310         /* basic functions */
 311         .config_init    = smsc_phy_config_init,
 312         .soft_reset     = smsc_phy_reset,
 313
 314         /* IRQ related */
 315         .ack_interrupt  = smsc_phy_ack_interrupt,
 316         .config_intr    = smsc_phy_config_intr,
 317
 318         .suspend        = genphy_suspend,
 319         .resume         = genphy_resume,
 320 }, {
 321         .phy_id         = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
 322         .phy_id_mask    = 0xfffffff0,
 323         .name           = "SMSC LAN8187",
 324
 325         /* PHY_BASIC_FEATURES */
 326
 327         .probe          = smsc_phy_probe,
 328
 329         /* basic functions */
 330         .config_init    = smsc_phy_config_init,
 331         .soft_reset     = smsc_phy_reset,
 332
 333         /* IRQ related */
 334         .ack_interrupt  = smsc_phy_ack_interrupt,
 335         .config_intr    = smsc_phy_config_intr,
 336
 337         /* Statistics */
 338         .get_sset_count = smsc_get_sset_count,
 339         .get_strings    = smsc_get_strings,
 340         .get_stats      = smsc_get_stats,
 341
 342         .suspend        = genphy_suspend,
 343         .resume         = genphy_resume,
 344 }, {
 345         /* This covers internal PHY (phy_id: 0x0007C0C3) for
 346          * LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505)
 347          */
 348         .phy_id         = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
 349         .phy_id_mask    = 0xfffffff0,
 350         .name           = "SMSC LAN8700",
 351
 352         /* PHY_BASIC_FEATURES */
 353
 354         .probe          = smsc_phy_probe,
 355
 356         /* basic functions */
 357         .read_status    = lan87xx_read_status,
 358         .config_init    = smsc_phy_config_init,
 359         .soft_reset     = smsc_phy_reset,
 360         .config_aneg    = lan87xx_config_aneg,
 361
 362         /* IRQ related */
 363         .ack_interrupt  = smsc_phy_ack_interrupt,
 364         .config_intr    = smsc_phy_config_intr,
 365
 366         /* Statistics */
 367         .get_sset_count = smsc_get_sset_count,
 368         .get_strings    = smsc_get_strings,
 369         .get_stats      = smsc_get_stats,
 370
 371         .suspend        = genphy_suspend,
 372         .resume         = genphy_resume,
 373 }, {
 374         .phy_id         = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
 375         .phy_id_mask    = 0xfffffff0,
 376         .name           = "SMSC LAN911x Internal PHY",
 377
 378         /* PHY_BASIC_FEATURES */
 379
 380         .probe          = smsc_phy_probe,
 381
 382         /* basic functions */
 383         .config_init    = lan911x_config_init,
 384
 385         /* IRQ related */
 386         .ack_interrupt  = smsc_phy_ack_interrupt,
 387         .config_intr    = smsc_phy_config_intr,
 388
 389         .suspend        = genphy_suspend,
 390         .resume         = genphy_resume,
 391 }, {
 392         /* This covers internal PHY (phy_id: 0x0007C0F0) for
 393          * LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01)
 394          */
 395         .phy_id         = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
 396         .phy_id_mask    = 0xfffffff0,
 397         .name           = "SMSC LAN8710/LAN8720",
 398
 399         /* PHY_BASIC_FEATURES */
 400
 401         .probe          = smsc_phy_probe,
 402         .remove         = smsc_phy_remove,
 403
 404         /* basic functions */
 405         .read_status    = lan87xx_read_status,
 406         .config_init    = smsc_phy_config_init,
 407         .soft_reset     = smsc_phy_reset,
 408         .config_aneg    = lan87xx_config_aneg_ext,
 409
 410         /* IRQ related */
 411         .ack_interrupt  = smsc_phy_ack_interrupt,
 412         .config_intr    = smsc_phy_config_intr,
 413
 414         /* Statistics */
 415         .get_sset_count = smsc_get_sset_count,
 416         .get_strings    = smsc_get_strings,
 417         .get_stats      = smsc_get_stats,
 418
 419         .suspend        = genphy_suspend,
 420         .resume         = genphy_resume,
 421 }, {
 422         .phy_id         = 0x0007c110,
 423         .phy_id_mask    = 0xfffffff0,
 424         .name           = "SMSC LAN8740",
 425
 426         /* PHY_BASIC_FEATURES */
 427         .flags          = PHY_RST_AFTER_CLK_EN,
 428
 429         .probe          = smsc_phy_probe,
 430
 431         /* basic functions */
 432         .read_status    = lan87xx_read_status,
 433         .config_init    = smsc_phy_config_init,
 434         .soft_reset     = smsc_phy_reset,
 435
 436         /* IRQ related */
 437         .ack_interrupt  = smsc_phy_ack_interrupt,
 438         .config_intr    = smsc_phy_config_intr,
 439
 440         /* Statistics */
 441         .get_sset_count = smsc_get_sset_count,
 442         .get_strings    = smsc_get_strings,
 443         .get_stats      = smsc_get_stats,
 444
 445         .suspend        = genphy_suspend,
 446         .resume         = genphy_resume,
 447 } };
 448
 449 module_phy_driver(smsc_phy_driver);
 450
 451 MODULE_DESCRIPTION("SMSC PHY driver");
 452 MODULE_AUTHOR("Herbert Valerio Riedel");
 453 MODULE_LICENSE("GPL");
 454
 455 static struct mdio_device_id __maybe_unused smsc_tbl[] = {
 456         { 0x0007c0a0, 0xfffffff0 },
 457         { 0x0007c0b0, 0xfffffff0 },
 458         { 0x0007c0c0, 0xfffffff0 },
 459         { 0x0007c0d0, 0xfffffff0 },
 460         { 0x0007c0f0, 0xfffffff0 },
 461         { 0x0007c110, 0xfffffff0 },
 462         { }
 463 };
 464
 465 MODULE_DEVICE_TABLE(mdio, smsc_tbl);