]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * Xilinx SystemACE device driver | |
3 | * | |
4 | * Copyright 2007 Secret Lab Technologies Ltd. | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify it | |
7 | * under the terms of the GNU General Public License version 2 as published | |
8 | * by the Free Software Foundation. | |
9 | */ | |
10 | ||
11 | /* | |
12 | * The SystemACE chip is designed to configure FPGAs by loading an FPGA | |
13 | * bitstream from a file on a CF card and squirting it into FPGAs connected | |
14 | * to the SystemACE JTAG chain. It also has the advantage of providing an | |
15 | * MPU interface which can be used to control the FPGA configuration process | |
16 | * and to use the attached CF card for general purpose storage. | |
17 | * | |
18 | * This driver is a block device driver for the SystemACE. | |
19 | * | |
20 | * Initialization: | |
21 | * The driver registers itself as a platform_device driver at module | |
22 | * load time. The platform bus will take care of calling the | |
23 | * ace_probe() method for all SystemACE instances in the system. Any | |
24 | * number of SystemACE instances are supported. ace_probe() calls | |
25 | * ace_setup() which initialized all data structures, reads the CF | |
26 | * id structure and registers the device. | |
27 | * | |
28 | * Processing: | |
29 | * Just about all of the heavy lifting in this driver is performed by | |
30 | * a Finite State Machine (FSM). The driver needs to wait on a number | |
31 | * of events; some raised by interrupts, some which need to be polled | |
32 | * for. Describing all of the behaviour in a FSM seems to be the | |
33 | * easiest way to keep the complexity low and make it easy to | |
34 | * understand what the driver is doing. If the block ops or the | |
35 | * request function need to interact with the hardware, then they | |
36 | * simply need to flag the request and kick of FSM processing. | |
37 | * | |
38 | * The FSM itself is atomic-safe code which can be run from any | |
39 | * context. The general process flow is: | |
40 | * 1. obtain the ace->lock spinlock. | |
41 | * 2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is | |
42 | * cleared. | |
43 | * 3. release the lock. | |
44 | * | |
45 | * Individual states do not sleep in any way. If a condition needs to | |
46 | * be waited for then the state much clear the fsm_continue flag and | |
47 | * either schedule the FSM to be run again at a later time, or expect | |
48 | * an interrupt to call the FSM when the desired condition is met. | |
49 | * | |
50 | * In normal operation, the FSM is processed at interrupt context | |
51 | * either when the driver's tasklet is scheduled, or when an irq is | |
52 | * raised by the hardware. The tasklet can be scheduled at any time. | |
53 | * The request method in particular schedules the tasklet when a new | |
54 | * request has been indicated by the block layer. Once started, the | |
55 | * FSM proceeds as far as it can processing the request until it | |
56 | * needs on a hardware event. At this point, it must yield execution. | |
57 | * | |
58 | * A state has two options when yielding execution: | |
59 | * 1. ace_fsm_yield() | |
60 | * - Call if need to poll for event. | |
61 | * - clears the fsm_continue flag to exit the processing loop | |
62 | * - reschedules the tasklet to run again as soon as possible | |
63 | * 2. ace_fsm_yieldirq() | |
64 | * - Call if an irq is expected from the HW | |
65 | * - clears the fsm_continue flag to exit the processing loop | |
66 | * - does not reschedule the tasklet so the FSM will not be processed | |
67 | * again until an irq is received. | |
68 | * After calling a yield function, the state must return control back | |
69 | * to the FSM main loop. | |
70 | * | |
71 | * Additionally, the driver maintains a kernel timer which can process | |
72 | * the FSM. If the FSM gets stalled, typically due to a missed | |
73 | * interrupt, then the kernel timer will expire and the driver can | |
74 | * continue where it left off. | |
75 | * | |
76 | * To Do: | |
77 | * - Add FPGA configuration control interface. | |
78 | * - Request major number from lanana | |
79 | */ | |
80 | ||
81 | #undef DEBUG | |
82 | ||
83 | #include <linux/module.h> | |
84 | #include <linux/ctype.h> | |
85 | #include <linux/init.h> | |
86 | #include <linux/interrupt.h> | |
87 | #include <linux/errno.h> | |
88 | #include <linux/kernel.h> | |
89 | #include <linux/delay.h> | |
90 | #include <linux/slab.h> | |
91 | #include <linux/blkdev.h> | |
92 | #include <linux/hdreg.h> | |
93 | #include <linux/platform_device.h> | |
94 | #if defined(CONFIG_OF) | |
95 | #include <linux/of_device.h> | |
96 | #include <linux/of_platform.h> | |
97 | #endif | |
98 | ||
99 | MODULE_AUTHOR("Grant Likely <[email protected]>"); | |
100 | MODULE_DESCRIPTION("Xilinx SystemACE device driver"); | |
101 | MODULE_LICENSE("GPL"); | |
102 | ||
103 | /* SystemACE register definitions */ | |
104 | #define ACE_BUSMODE (0x00) | |
105 | ||
106 | #define ACE_STATUS (0x04) | |
107 | #define ACE_STATUS_CFGLOCK (0x00000001) | |
108 | #define ACE_STATUS_MPULOCK (0x00000002) | |
109 | #define ACE_STATUS_CFGERROR (0x00000004) /* config controller error */ | |
110 | #define ACE_STATUS_CFCERROR (0x00000008) /* CF controller error */ | |
111 | #define ACE_STATUS_CFDETECT (0x00000010) | |
112 | #define ACE_STATUS_DATABUFRDY (0x00000020) | |
113 | #define ACE_STATUS_DATABUFMODE (0x00000040) | |
114 | #define ACE_STATUS_CFGDONE (0x00000080) | |
115 | #define ACE_STATUS_RDYFORCFCMD (0x00000100) | |
116 | #define ACE_STATUS_CFGMODEPIN (0x00000200) | |
117 | #define ACE_STATUS_CFGADDR_MASK (0x0000e000) | |
118 | #define ACE_STATUS_CFBSY (0x00020000) | |
119 | #define ACE_STATUS_CFRDY (0x00040000) | |
120 | #define ACE_STATUS_CFDWF (0x00080000) | |
121 | #define ACE_STATUS_CFDSC (0x00100000) | |
122 | #define ACE_STATUS_CFDRQ (0x00200000) | |
123 | #define ACE_STATUS_CFCORR (0x00400000) | |
124 | #define ACE_STATUS_CFERR (0x00800000) | |
125 | ||
126 | #define ACE_ERROR (0x08) | |
127 | #define ACE_CFGLBA (0x0c) | |
128 | #define ACE_MPULBA (0x10) | |
129 | ||
130 | #define ACE_SECCNTCMD (0x14) | |
131 | #define ACE_SECCNTCMD_RESET (0x0100) | |
132 | #define ACE_SECCNTCMD_IDENTIFY (0x0200) | |
133 | #define ACE_SECCNTCMD_READ_DATA (0x0300) | |
134 | #define ACE_SECCNTCMD_WRITE_DATA (0x0400) | |
135 | #define ACE_SECCNTCMD_ABORT (0x0600) | |
136 | ||
137 | #define ACE_VERSION (0x16) | |
138 | #define ACE_VERSION_REVISION_MASK (0x00FF) | |
139 | #define ACE_VERSION_MINOR_MASK (0x0F00) | |
140 | #define ACE_VERSION_MAJOR_MASK (0xF000) | |
141 | ||
142 | #define ACE_CTRL (0x18) | |
143 | #define ACE_CTRL_FORCELOCKREQ (0x0001) | |
144 | #define ACE_CTRL_LOCKREQ (0x0002) | |
145 | #define ACE_CTRL_FORCECFGADDR (0x0004) | |
146 | #define ACE_CTRL_FORCECFGMODE (0x0008) | |
147 | #define ACE_CTRL_CFGMODE (0x0010) | |
148 | #define ACE_CTRL_CFGSTART (0x0020) | |
149 | #define ACE_CTRL_CFGSEL (0x0040) | |
150 | #define ACE_CTRL_CFGRESET (0x0080) | |
151 | #define ACE_CTRL_DATABUFRDYIRQ (0x0100) | |
152 | #define ACE_CTRL_ERRORIRQ (0x0200) | |
153 | #define ACE_CTRL_CFGDONEIRQ (0x0400) | |
154 | #define ACE_CTRL_RESETIRQ (0x0800) | |
155 | #define ACE_CTRL_CFGPROG (0x1000) | |
156 | #define ACE_CTRL_CFGADDR_MASK (0xe000) | |
157 | ||
158 | #define ACE_FATSTAT (0x1c) | |
159 | ||
160 | #define ACE_NUM_MINORS 16 | |
161 | #define ACE_SECTOR_SIZE (512) | |
162 | #define ACE_FIFO_SIZE (32) | |
163 | #define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE) | |
164 | ||
165 | #define ACE_BUS_WIDTH_8 0 | |
166 | #define ACE_BUS_WIDTH_16 1 | |
167 | ||
168 | struct ace_reg_ops; | |
169 | ||
170 | struct ace_device { | |
171 | /* driver state data */ | |
172 | int id; | |
173 | int media_change; | |
174 | int users; | |
175 | struct list_head list; | |
176 | ||
177 | /* finite state machine data */ | |
178 | struct tasklet_struct fsm_tasklet; | |
179 | uint fsm_task; /* Current activity (ACE_TASK_*) */ | |
180 | uint fsm_state; /* Current state (ACE_FSM_STATE_*) */ | |
181 | uint fsm_continue_flag; /* cleared to exit FSM mainloop */ | |
182 | uint fsm_iter_num; | |
183 | struct timer_list stall_timer; | |
184 | ||
185 | /* Transfer state/result, use for both id and block request */ | |
186 | struct request *req; /* request being processed */ | |
187 | void *data_ptr; /* pointer to I/O buffer */ | |
188 | int data_count; /* number of buffers remaining */ | |
189 | int data_result; /* Result of transfer; 0 := success */ | |
190 | ||
191 | int id_req_count; /* count of id requests */ | |
192 | int id_result; | |
193 | struct completion id_completion; /* used when id req finishes */ | |
194 | int in_irq; | |
195 | ||
196 | /* Details of hardware device */ | |
197 | unsigned long physaddr; | |
198 | void __iomem *baseaddr; | |
199 | int irq; | |
200 | int bus_width; /* 0 := 8 bit; 1 := 16 bit */ | |
201 | struct ace_reg_ops *reg_ops; | |
202 | int lock_count; | |
203 | ||
204 | /* Block device data structures */ | |
205 | spinlock_t lock; | |
206 | struct device *dev; | |
207 | struct request_queue *queue; | |
208 | struct gendisk *gd; | |
209 | ||
210 | /* Inserted CF card parameters */ | |
211 | struct hd_driveid cf_id; | |
212 | }; | |
213 | ||
214 | static int ace_major; | |
215 | ||
216 | /* --------------------------------------------------------------------- | |
217 | * Low level register access | |
218 | */ | |
219 | ||
220 | struct ace_reg_ops { | |
221 | u16(*in) (struct ace_device * ace, int reg); | |
222 | void (*out) (struct ace_device * ace, int reg, u16 val); | |
223 | void (*datain) (struct ace_device * ace); | |
224 | void (*dataout) (struct ace_device * ace); | |
225 | }; | |
226 | ||
227 | /* 8 Bit bus width */ | |
228 | static u16 ace_in_8(struct ace_device *ace, int reg) | |
229 | { | |
230 | void __iomem *r = ace->baseaddr + reg; | |
231 | return in_8(r) | (in_8(r + 1) << 8); | |
232 | } | |
233 | ||
234 | static void ace_out_8(struct ace_device *ace, int reg, u16 val) | |
235 | { | |
236 | void __iomem *r = ace->baseaddr + reg; | |
237 | out_8(r, val); | |
238 | out_8(r + 1, val >> 8); | |
239 | } | |
240 | ||
241 | static void ace_datain_8(struct ace_device *ace) | |
242 | { | |
243 | void __iomem *r = ace->baseaddr + 0x40; | |
244 | u8 *dst = ace->data_ptr; | |
245 | int i = ACE_FIFO_SIZE; | |
246 | while (i--) | |
247 | *dst++ = in_8(r++); | |
248 | ace->data_ptr = dst; | |
249 | } | |
250 | ||
251 | static void ace_dataout_8(struct ace_device *ace) | |
252 | { | |
253 | void __iomem *r = ace->baseaddr + 0x40; | |
254 | u8 *src = ace->data_ptr; | |
255 | int i = ACE_FIFO_SIZE; | |
256 | while (i--) | |
257 | out_8(r++, *src++); | |
258 | ace->data_ptr = src; | |
259 | } | |
260 | ||
261 | static struct ace_reg_ops ace_reg_8_ops = { | |
262 | .in = ace_in_8, | |
263 | .out = ace_out_8, | |
264 | .datain = ace_datain_8, | |
265 | .dataout = ace_dataout_8, | |
266 | }; | |
267 | ||
268 | /* 16 bit big endian bus attachment */ | |
269 | static u16 ace_in_be16(struct ace_device *ace, int reg) | |
270 | { | |
271 | return in_be16(ace->baseaddr + reg); | |
272 | } | |
273 | ||
274 | static void ace_out_be16(struct ace_device *ace, int reg, u16 val) | |
275 | { | |
276 | out_be16(ace->baseaddr + reg, val); | |
277 | } | |
278 | ||
279 | static void ace_datain_be16(struct ace_device *ace) | |
280 | { | |
281 | int i = ACE_FIFO_SIZE / 2; | |
282 | u16 *dst = ace->data_ptr; | |
283 | while (i--) | |
284 | *dst++ = in_le16(ace->baseaddr + 0x40); | |
285 | ace->data_ptr = dst; | |
286 | } | |
287 | ||
288 | static void ace_dataout_be16(struct ace_device *ace) | |
289 | { | |
290 | int i = ACE_FIFO_SIZE / 2; | |
291 | u16 *src = ace->data_ptr; | |
292 | while (i--) | |
293 | out_le16(ace->baseaddr + 0x40, *src++); | |
294 | ace->data_ptr = src; | |
295 | } | |
296 | ||
297 | /* 16 bit little endian bus attachment */ | |
298 | static u16 ace_in_le16(struct ace_device *ace, int reg) | |
299 | { | |
300 | return in_le16(ace->baseaddr + reg); | |
301 | } | |
302 | ||
303 | static void ace_out_le16(struct ace_device *ace, int reg, u16 val) | |
304 | { | |
305 | out_le16(ace->baseaddr + reg, val); | |
306 | } | |
307 | ||
308 | static void ace_datain_le16(struct ace_device *ace) | |
309 | { | |
310 | int i = ACE_FIFO_SIZE / 2; | |
311 | u16 *dst = ace->data_ptr; | |
312 | while (i--) | |
313 | *dst++ = in_be16(ace->baseaddr + 0x40); | |
314 | ace->data_ptr = dst; | |
315 | } | |
316 | ||
317 | static void ace_dataout_le16(struct ace_device *ace) | |
318 | { | |
319 | int i = ACE_FIFO_SIZE / 2; | |
320 | u16 *src = ace->data_ptr; | |
321 | while (i--) | |
322 | out_be16(ace->baseaddr + 0x40, *src++); | |
323 | ace->data_ptr = src; | |
324 | } | |
325 | ||
326 | static struct ace_reg_ops ace_reg_be16_ops = { | |
327 | .in = ace_in_be16, | |
328 | .out = ace_out_be16, | |
329 | .datain = ace_datain_be16, | |
330 | .dataout = ace_dataout_be16, | |
331 | }; | |
332 | ||
333 | static struct ace_reg_ops ace_reg_le16_ops = { | |
334 | .in = ace_in_le16, | |
335 | .out = ace_out_le16, | |
336 | .datain = ace_datain_le16, | |
337 | .dataout = ace_dataout_le16, | |
338 | }; | |
339 | ||
340 | static inline u16 ace_in(struct ace_device *ace, int reg) | |
341 | { | |
342 | return ace->reg_ops->in(ace, reg); | |
343 | } | |
344 | ||
345 | static inline u32 ace_in32(struct ace_device *ace, int reg) | |
346 | { | |
347 | return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16); | |
348 | } | |
349 | ||
350 | static inline void ace_out(struct ace_device *ace, int reg, u16 val) | |
351 | { | |
352 | ace->reg_ops->out(ace, reg, val); | |
353 | } | |
354 | ||
355 | static inline void ace_out32(struct ace_device *ace, int reg, u32 val) | |
356 | { | |
357 | ace_out(ace, reg, val); | |
358 | ace_out(ace, reg + 2, val >> 16); | |
359 | } | |
360 | ||
361 | /* --------------------------------------------------------------------- | |
362 | * Debug support functions | |
363 | */ | |
364 | ||
365 | #if defined(DEBUG) | |
366 | static void ace_dump_mem(void *base, int len) | |
367 | { | |
368 | const char *ptr = base; | |
369 | int i, j; | |
370 | ||
371 | for (i = 0; i < len; i += 16) { | |
372 | printk(KERN_INFO "%.8x:", i); | |
373 | for (j = 0; j < 16; j++) { | |
374 | if (!(j % 4)) | |
375 | printk(" "); | |
376 | printk("%.2x", ptr[i + j]); | |
377 | } | |
378 | printk(" "); | |
379 | for (j = 0; j < 16; j++) | |
380 | printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.'); | |
381 | printk("\n"); | |
382 | } | |
383 | } | |
384 | #else | |
385 | static inline void ace_dump_mem(void *base, int len) | |
386 | { | |
387 | } | |
388 | #endif | |
389 | ||
390 | static void ace_dump_regs(struct ace_device *ace) | |
391 | { | |
392 | dev_info(ace->dev, " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n" | |
393 | KERN_INFO " status:%.8x mpu_lba:%.8x busmode:%4x\n" | |
394 | KERN_INFO " error: %.8x cfg_lba:%.8x fatstat:%.4x\n", | |
395 | ace_in32(ace, ACE_CTRL), | |
396 | ace_in(ace, ACE_SECCNTCMD), | |
397 | ace_in(ace, ACE_VERSION), | |
398 | ace_in32(ace, ACE_STATUS), | |
399 | ace_in32(ace, ACE_MPULBA), | |
400 | ace_in(ace, ACE_BUSMODE), | |
401 | ace_in32(ace, ACE_ERROR), | |
402 | ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT)); | |
403 | } | |
404 | ||
405 | void ace_fix_driveid(struct hd_driveid *id) | |
406 | { | |
407 | #if defined(__BIG_ENDIAN) | |
408 | u16 *buf = (void *)id; | |
409 | int i; | |
410 | ||
411 | /* All half words have wrong byte order; swap the bytes */ | |
412 | for (i = 0; i < sizeof(struct hd_driveid); i += 2, buf++) | |
413 | *buf = le16_to_cpu(*buf); | |
414 | ||
415 | /* Some of the data values are 32bit; swap the half words */ | |
416 | id->lba_capacity = ((id->lba_capacity >> 16) & 0x0000FFFF) | | |
417 | ((id->lba_capacity << 16) & 0xFFFF0000); | |
418 | id->spg = ((id->spg >> 16) & 0x0000FFFF) | | |
419 | ((id->spg << 16) & 0xFFFF0000); | |
420 | #endif | |
421 | } | |
422 | ||
423 | /* --------------------------------------------------------------------- | |
424 | * Finite State Machine (FSM) implementation | |
425 | */ | |
426 | ||
427 | /* FSM tasks; used to direct state transitions */ | |
428 | #define ACE_TASK_IDLE 0 | |
429 | #define ACE_TASK_IDENTIFY 1 | |
430 | #define ACE_TASK_READ 2 | |
431 | #define ACE_TASK_WRITE 3 | |
432 | #define ACE_FSM_NUM_TASKS 4 | |
433 | ||
434 | /* FSM state definitions */ | |
435 | #define ACE_FSM_STATE_IDLE 0 | |
436 | #define ACE_FSM_STATE_REQ_LOCK 1 | |
437 | #define ACE_FSM_STATE_WAIT_LOCK 2 | |
438 | #define ACE_FSM_STATE_WAIT_CFREADY 3 | |
439 | #define ACE_FSM_STATE_IDENTIFY_PREPARE 4 | |
440 | #define ACE_FSM_STATE_IDENTIFY_TRANSFER 5 | |
441 | #define ACE_FSM_STATE_IDENTIFY_COMPLETE 6 | |
442 | #define ACE_FSM_STATE_REQ_PREPARE 7 | |
443 | #define ACE_FSM_STATE_REQ_TRANSFER 8 | |
444 | #define ACE_FSM_STATE_REQ_COMPLETE 9 | |
445 | #define ACE_FSM_STATE_ERROR 10 | |
446 | #define ACE_FSM_NUM_STATES 11 | |
447 | ||
448 | /* Set flag to exit FSM loop and reschedule tasklet */ | |
449 | static inline void ace_fsm_yield(struct ace_device *ace) | |
450 | { | |
451 | dev_dbg(ace->dev, "ace_fsm_yield()\n"); | |
452 | tasklet_schedule(&ace->fsm_tasklet); | |
453 | ace->fsm_continue_flag = 0; | |
454 | } | |
455 | ||
456 | /* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */ | |
457 | static inline void ace_fsm_yieldirq(struct ace_device *ace) | |
458 | { | |
459 | dev_dbg(ace->dev, "ace_fsm_yieldirq()\n"); | |
460 | ||
461 | if (ace->irq == NO_IRQ) | |
462 | /* No IRQ assigned, so need to poll */ | |
463 | tasklet_schedule(&ace->fsm_tasklet); | |
464 | ace->fsm_continue_flag = 0; | |
465 | } | |
466 | ||
467 | /* Get the next read/write request; ending requests that we don't handle */ | |
468 | struct request *ace_get_next_request(struct request_queue * q) | |
469 | { | |
470 | struct request *req; | |
471 | ||
472 | while ((req = elv_next_request(q)) != NULL) { | |
473 | if (blk_fs_request(req)) | |
474 | break; | |
475 | end_request(req, 0); | |
476 | } | |
477 | return req; | |
478 | } | |
479 | ||
480 | static void ace_fsm_dostate(struct ace_device *ace) | |
481 | { | |
482 | struct request *req; | |
483 | u32 status; | |
484 | u16 val; | |
485 | int count; | |
486 | ||
487 | #if defined(DEBUG) | |
488 | dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n", | |
489 | ace->fsm_state, ace->id_req_count); | |
490 | #endif | |
491 | ||
492 | switch (ace->fsm_state) { | |
493 | case ACE_FSM_STATE_IDLE: | |
494 | /* See if there is anything to do */ | |
495 | if (ace->id_req_count || ace_get_next_request(ace->queue)) { | |
496 | ace->fsm_iter_num++; | |
497 | ace->fsm_state = ACE_FSM_STATE_REQ_LOCK; | |
498 | mod_timer(&ace->stall_timer, jiffies + HZ); | |
499 | if (!timer_pending(&ace->stall_timer)) | |
500 | add_timer(&ace->stall_timer); | |
501 | break; | |
502 | } | |
503 | del_timer(&ace->stall_timer); | |
504 | ace->fsm_continue_flag = 0; | |
505 | break; | |
506 | ||
507 | case ACE_FSM_STATE_REQ_LOCK: | |
508 | if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { | |
509 | /* Already have the lock, jump to next state */ | |
510 | ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; | |
511 | break; | |
512 | } | |
513 | ||
514 | /* Request the lock */ | |
515 | val = ace_in(ace, ACE_CTRL); | |
516 | ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ); | |
517 | ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK; | |
518 | break; | |
519 | ||
520 | case ACE_FSM_STATE_WAIT_LOCK: | |
521 | if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) { | |
522 | /* got the lock; move to next state */ | |
523 | ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY; | |
524 | break; | |
525 | } | |
526 | ||
527 | /* wait a bit for the lock */ | |
528 | ace_fsm_yield(ace); | |
529 | break; | |
530 | ||
531 | case ACE_FSM_STATE_WAIT_CFREADY: | |
532 | status = ace_in32(ace, ACE_STATUS); | |
533 | if (!(status & ACE_STATUS_RDYFORCFCMD) || | |
534 | (status & ACE_STATUS_CFBSY)) { | |
535 | /* CF card isn't ready; it needs to be polled */ | |
536 | ace_fsm_yield(ace); | |
537 | break; | |
538 | } | |
539 | ||
540 | /* Device is ready for command; determine what to do next */ | |
541 | if (ace->id_req_count) | |
542 | ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE; | |
543 | else | |
544 | ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE; | |
545 | break; | |
546 | ||
547 | case ACE_FSM_STATE_IDENTIFY_PREPARE: | |
548 | /* Send identify command */ | |
549 | ace->fsm_task = ACE_TASK_IDENTIFY; | |
550 | ace->data_ptr = &ace->cf_id; | |
551 | ace->data_count = ACE_BUF_PER_SECTOR; | |
552 | ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY); | |
553 | ||
554 | /* As per datasheet, put config controller in reset */ | |
555 | val = ace_in(ace, ACE_CTRL); | |
556 | ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); | |
557 | ||
558 | /* irq handler takes over from this point; wait for the | |
559 | * transfer to complete */ | |
560 | ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER; | |
561 | ace_fsm_yieldirq(ace); | |
562 | break; | |
563 | ||
564 | case ACE_FSM_STATE_IDENTIFY_TRANSFER: | |
565 | /* Check that the sysace is ready to receive data */ | |
566 | status = ace_in32(ace, ACE_STATUS); | |
567 | if (status & ACE_STATUS_CFBSY) { | |
568 | dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n", | |
569 | ace->fsm_task, ace->fsm_iter_num, | |
570 | ace->data_count); | |
571 | ace_fsm_yield(ace); | |
572 | break; | |
573 | } | |
574 | if (!(status & ACE_STATUS_DATABUFRDY)) { | |
575 | ace_fsm_yield(ace); | |
576 | break; | |
577 | } | |
578 | ||
579 | /* Transfer the next buffer */ | |
580 | ace->reg_ops->datain(ace); | |
581 | ace->data_count--; | |
582 | ||
583 | /* If there are still buffers to be transfers; jump out here */ | |
584 | if (ace->data_count != 0) { | |
585 | ace_fsm_yieldirq(ace); | |
586 | break; | |
587 | } | |
588 | ||
589 | /* transfer finished; kick state machine */ | |
590 | dev_dbg(ace->dev, "identify finished\n"); | |
591 | ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE; | |
592 | break; | |
593 | ||
594 | case ACE_FSM_STATE_IDENTIFY_COMPLETE: | |
595 | ace_fix_driveid(&ace->cf_id); | |
596 | ace_dump_mem(&ace->cf_id, 512); /* Debug: Dump out disk ID */ | |
597 | ||
598 | if (ace->data_result) { | |
599 | /* Error occured, disable the disk */ | |
600 | ace->media_change = 1; | |
601 | set_capacity(ace->gd, 0); | |
602 | dev_err(ace->dev, "error fetching CF id (%i)\n", | |
603 | ace->data_result); | |
604 | } else { | |
605 | ace->media_change = 0; | |
606 | ||
607 | /* Record disk parameters */ | |
608 | set_capacity(ace->gd, ace->cf_id.lba_capacity); | |
609 | dev_info(ace->dev, "capacity: %i sectors\n", | |
610 | ace->cf_id.lba_capacity); | |
611 | } | |
612 | ||
613 | /* We're done, drop to IDLE state and notify waiters */ | |
614 | ace->fsm_state = ACE_FSM_STATE_IDLE; | |
615 | ace->id_result = ace->data_result; | |
616 | while (ace->id_req_count) { | |
617 | complete(&ace->id_completion); | |
618 | ace->id_req_count--; | |
619 | } | |
620 | break; | |
621 | ||
622 | case ACE_FSM_STATE_REQ_PREPARE: | |
623 | req = ace_get_next_request(ace->queue); | |
624 | if (!req) { | |
625 | ace->fsm_state = ACE_FSM_STATE_IDLE; | |
626 | break; | |
627 | } | |
628 | ||
629 | /* Okay, it's a data request, set it up for transfer */ | |
630 | dev_dbg(ace->dev, | |
631 | "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n", | |
632 | req->sector, req->hard_nr_sectors, | |
633 | req->current_nr_sectors, rq_data_dir(req)); | |
634 | ||
635 | ace->req = req; | |
636 | ace->data_ptr = req->buffer; | |
637 | ace->data_count = req->current_nr_sectors * ACE_BUF_PER_SECTOR; | |
638 | ace_out32(ace, ACE_MPULBA, req->sector & 0x0FFFFFFF); | |
639 | ||
640 | count = req->hard_nr_sectors; | |
641 | if (rq_data_dir(req)) { | |
642 | /* Kick off write request */ | |
643 | dev_dbg(ace->dev, "write data\n"); | |
644 | ace->fsm_task = ACE_TASK_WRITE; | |
645 | ace_out(ace, ACE_SECCNTCMD, | |
646 | count | ACE_SECCNTCMD_WRITE_DATA); | |
647 | } else { | |
648 | /* Kick off read request */ | |
649 | dev_dbg(ace->dev, "read data\n"); | |
650 | ace->fsm_task = ACE_TASK_READ; | |
651 | ace_out(ace, ACE_SECCNTCMD, | |
652 | count | ACE_SECCNTCMD_READ_DATA); | |
653 | } | |
654 | ||
655 | /* As per datasheet, put config controller in reset */ | |
656 | val = ace_in(ace, ACE_CTRL); | |
657 | ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET); | |
658 | ||
659 | /* Move to the transfer state. The systemace will raise | |
660 | * an interrupt once there is something to do | |
661 | */ | |
662 | ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER; | |
663 | if (ace->fsm_task == ACE_TASK_READ) | |
664 | ace_fsm_yieldirq(ace); /* wait for data ready */ | |
665 | break; | |
666 | ||
667 | case ACE_FSM_STATE_REQ_TRANSFER: | |
668 | /* Check that the sysace is ready to receive data */ | |
669 | status = ace_in32(ace, ACE_STATUS); | |
670 | if (status & ACE_STATUS_CFBSY) { | |
671 | dev_dbg(ace->dev, | |
672 | "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n", | |
673 | ace->fsm_task, ace->fsm_iter_num, | |
674 | ace->req->current_nr_sectors * 16, | |
675 | ace->data_count, ace->in_irq); | |
676 | ace_fsm_yield(ace); /* need to poll CFBSY bit */ | |
677 | break; | |
678 | } | |
679 | if (!(status & ACE_STATUS_DATABUFRDY)) { | |
680 | dev_dbg(ace->dev, | |
681 | "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n", | |
682 | ace->fsm_task, ace->fsm_iter_num, | |
683 | ace->req->current_nr_sectors * 16, | |
684 | ace->data_count, ace->in_irq); | |
685 | ace_fsm_yieldirq(ace); | |
686 | break; | |
687 | } | |
688 | ||
689 | /* Transfer the next buffer */ | |
690 | if (ace->fsm_task == ACE_TASK_WRITE) | |
691 | ace->reg_ops->dataout(ace); | |
692 | else | |
693 | ace->reg_ops->datain(ace); | |
694 | ace->data_count--; | |
695 | ||
696 | /* If there are still buffers to be transfers; jump out here */ | |
697 | if (ace->data_count != 0) { | |
698 | ace_fsm_yieldirq(ace); | |
699 | break; | |
700 | } | |
701 | ||
702 | /* bio finished; is there another one? */ | |
703 | if (__blk_end_request(ace->req, 0, | |
704 | blk_rq_cur_bytes(ace->req))) { | |
705 | /* dev_dbg(ace->dev, "next block; h=%li c=%i\n", | |
706 | * ace->req->hard_nr_sectors, | |
707 | * ace->req->current_nr_sectors); | |
708 | */ | |
709 | ace->data_ptr = ace->req->buffer; | |
710 | ace->data_count = ace->req->current_nr_sectors * 16; | |
711 | ace_fsm_yieldirq(ace); | |
712 | break; | |
713 | } | |
714 | ||
715 | ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE; | |
716 | break; | |
717 | ||
718 | case ACE_FSM_STATE_REQ_COMPLETE: | |
719 | ace->req = NULL; | |
720 | ||
721 | /* Finished request; go to idle state */ | |
722 | ace->fsm_state = ACE_FSM_STATE_IDLE; | |
723 | break; | |
724 | ||
725 | default: | |
726 | ace->fsm_state = ACE_FSM_STATE_IDLE; | |
727 | break; | |
728 | } | |
729 | } | |
730 | ||
731 | static void ace_fsm_tasklet(unsigned long data) | |
732 | { | |
733 | struct ace_device *ace = (void *)data; | |
734 | unsigned long flags; | |
735 | ||
736 | spin_lock_irqsave(&ace->lock, flags); | |
737 | ||
738 | /* Loop over state machine until told to stop */ | |
739 | ace->fsm_continue_flag = 1; | |
740 | while (ace->fsm_continue_flag) | |
741 | ace_fsm_dostate(ace); | |
742 | ||
743 | spin_unlock_irqrestore(&ace->lock, flags); | |
744 | } | |
745 | ||
746 | static void ace_stall_timer(unsigned long data) | |
747 | { | |
748 | struct ace_device *ace = (void *)data; | |
749 | unsigned long flags; | |
750 | ||
751 | dev_warn(ace->dev, | |
752 | "kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n", | |
753 | ace->fsm_state, ace->fsm_task, ace->fsm_iter_num, | |
754 | ace->data_count); | |
755 | spin_lock_irqsave(&ace->lock, flags); | |
756 | ||
757 | /* Rearm the stall timer *before* entering FSM (which may then | |
758 | * delete the timer) */ | |
759 | mod_timer(&ace->stall_timer, jiffies + HZ); | |
760 | ||
761 | /* Loop over state machine until told to stop */ | |
762 | ace->fsm_continue_flag = 1; | |
763 | while (ace->fsm_continue_flag) | |
764 | ace_fsm_dostate(ace); | |
765 | ||
766 | spin_unlock_irqrestore(&ace->lock, flags); | |
767 | } | |
768 | ||
769 | /* --------------------------------------------------------------------- | |
770 | * Interrupt handling routines | |
771 | */ | |
772 | static int ace_interrupt_checkstate(struct ace_device *ace) | |
773 | { | |
774 | u32 sreg = ace_in32(ace, ACE_STATUS); | |
775 | u16 creg = ace_in(ace, ACE_CTRL); | |
776 | ||
777 | /* Check for error occurance */ | |
778 | if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) && | |
779 | (creg & ACE_CTRL_ERRORIRQ)) { | |
780 | dev_err(ace->dev, "transfer failure\n"); | |
781 | ace_dump_regs(ace); | |
782 | return -EIO; | |
783 | } | |
784 | ||
785 | return 0; | |
786 | } | |
787 | ||
788 | static irqreturn_t ace_interrupt(int irq, void *dev_id) | |
789 | { | |
790 | u16 creg; | |
791 | struct ace_device *ace = dev_id; | |
792 | ||
793 | /* be safe and get the lock */ | |
794 | spin_lock(&ace->lock); | |
795 | ace->in_irq = 1; | |
796 | ||
797 | /* clear the interrupt */ | |
798 | creg = ace_in(ace, ACE_CTRL); | |
799 | ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ); | |
800 | ace_out(ace, ACE_CTRL, creg); | |
801 | ||
802 | /* check for IO failures */ | |
803 | if (ace_interrupt_checkstate(ace)) | |
804 | ace->data_result = -EIO; | |
805 | ||
806 | if (ace->fsm_task == 0) { | |
807 | dev_err(ace->dev, | |
808 | "spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n", | |
809 | ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL), | |
810 | ace_in(ace, ACE_SECCNTCMD)); | |
811 | dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n", | |
812 | ace->fsm_task, ace->fsm_state, ace->data_count); | |
813 | } | |
814 | ||
815 | /* Loop over state machine until told to stop */ | |
816 | ace->fsm_continue_flag = 1; | |
817 | while (ace->fsm_continue_flag) | |
818 | ace_fsm_dostate(ace); | |
819 | ||
820 | /* done with interrupt; drop the lock */ | |
821 | ace->in_irq = 0; | |
822 | spin_unlock(&ace->lock); | |
823 | ||
824 | return IRQ_HANDLED; | |
825 | } | |
826 | ||
827 | /* --------------------------------------------------------------------- | |
828 | * Block ops | |
829 | */ | |
830 | static void ace_request(struct request_queue * q) | |
831 | { | |
832 | struct request *req; | |
833 | struct ace_device *ace; | |
834 | ||
835 | req = ace_get_next_request(q); | |
836 | ||
837 | if (req) { | |
838 | ace = req->rq_disk->private_data; | |
839 | tasklet_schedule(&ace->fsm_tasklet); | |
840 | } | |
841 | } | |
842 | ||
843 | static int ace_media_changed(struct gendisk *gd) | |
844 | { | |
845 | struct ace_device *ace = gd->private_data; | |
846 | dev_dbg(ace->dev, "ace_media_changed(): %i\n", ace->media_change); | |
847 | ||
848 | return ace->media_change; | |
849 | } | |
850 | ||
851 | static int ace_revalidate_disk(struct gendisk *gd) | |
852 | { | |
853 | struct ace_device *ace = gd->private_data; | |
854 | unsigned long flags; | |
855 | ||
856 | dev_dbg(ace->dev, "ace_revalidate_disk()\n"); | |
857 | ||
858 | if (ace->media_change) { | |
859 | dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n"); | |
860 | ||
861 | spin_lock_irqsave(&ace->lock, flags); | |
862 | ace->id_req_count++; | |
863 | spin_unlock_irqrestore(&ace->lock, flags); | |
864 | ||
865 | tasklet_schedule(&ace->fsm_tasklet); | |
866 | wait_for_completion(&ace->id_completion); | |
867 | } | |
868 | ||
869 | dev_dbg(ace->dev, "revalidate complete\n"); | |
870 | return ace->id_result; | |
871 | } | |
872 | ||
873 | static int ace_open(struct inode *inode, struct file *filp) | |
874 | { | |
875 | struct ace_device *ace = inode->i_bdev->bd_disk->private_data; | |
876 | unsigned long flags; | |
877 | ||
878 | dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1); | |
879 | ||
880 | filp->private_data = ace; | |
881 | spin_lock_irqsave(&ace->lock, flags); | |
882 | ace->users++; | |
883 | spin_unlock_irqrestore(&ace->lock, flags); | |
884 | ||
885 | check_disk_change(inode->i_bdev); | |
886 | return 0; | |
887 | } | |
888 | ||
889 | static int ace_release(struct inode *inode, struct file *filp) | |
890 | { | |
891 | struct ace_device *ace = inode->i_bdev->bd_disk->private_data; | |
892 | unsigned long flags; | |
893 | u16 val; | |
894 | ||
895 | dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1); | |
896 | ||
897 | spin_lock_irqsave(&ace->lock, flags); | |
898 | ace->users--; | |
899 | if (ace->users == 0) { | |
900 | val = ace_in(ace, ACE_CTRL); | |
901 | ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ); | |
902 | } | |
903 | spin_unlock_irqrestore(&ace->lock, flags); | |
904 | return 0; | |
905 | } | |
906 | ||
907 | static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo) | |
908 | { | |
909 | struct ace_device *ace = bdev->bd_disk->private_data; | |
910 | ||
911 | dev_dbg(ace->dev, "ace_getgeo()\n"); | |
912 | ||
913 | geo->heads = ace->cf_id.heads; | |
914 | geo->sectors = ace->cf_id.sectors; | |
915 | geo->cylinders = ace->cf_id.cyls; | |
916 | ||
917 | return 0; | |
918 | } | |
919 | ||
920 | static struct block_device_operations ace_fops = { | |
921 | .owner = THIS_MODULE, | |
922 | .open = ace_open, | |
923 | .release = ace_release, | |
924 | .media_changed = ace_media_changed, | |
925 | .revalidate_disk = ace_revalidate_disk, | |
926 | .getgeo = ace_getgeo, | |
927 | }; | |
928 | ||
929 | /* -------------------------------------------------------------------- | |
930 | * SystemACE device setup/teardown code | |
931 | */ | |
932 | static int __devinit ace_setup(struct ace_device *ace) | |
933 | { | |
934 | u16 version; | |
935 | u16 val; | |
936 | int rc; | |
937 | ||
938 | dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace); | |
939 | dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq); | |
940 | ||
941 | spin_lock_init(&ace->lock); | |
942 | init_completion(&ace->id_completion); | |
943 | ||
944 | /* | |
945 | * Map the device | |
946 | */ | |
947 | ace->baseaddr = ioremap(ace->physaddr, 0x80); | |
948 | if (!ace->baseaddr) | |
949 | goto err_ioremap; | |
950 | ||
951 | /* | |
952 | * Initialize the state machine tasklet and stall timer | |
953 | */ | |
954 | tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace); | |
955 | setup_timer(&ace->stall_timer, ace_stall_timer, (unsigned long)ace); | |
956 | ||
957 | /* | |
958 | * Initialize the request queue | |
959 | */ | |
960 | ace->queue = blk_init_queue(ace_request, &ace->lock); | |
961 | if (ace->queue == NULL) | |
962 | goto err_blk_initq; | |
963 | blk_queue_hardsect_size(ace->queue, 512); | |
964 | ||
965 | /* | |
966 | * Allocate and initialize GD structure | |
967 | */ | |
968 | ace->gd = alloc_disk(ACE_NUM_MINORS); | |
969 | if (!ace->gd) | |
970 | goto err_alloc_disk; | |
971 | ||
972 | ace->gd->major = ace_major; | |
973 | ace->gd->first_minor = ace->id * ACE_NUM_MINORS; | |
974 | ace->gd->fops = &ace_fops; | |
975 | ace->gd->queue = ace->queue; | |
976 | ace->gd->private_data = ace; | |
977 | snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a'); | |
978 | ||
979 | /* set bus width */ | |
980 | if (ace->bus_width == ACE_BUS_WIDTH_16) { | |
981 | /* 0x0101 should work regardless of endianess */ | |
982 | ace_out_le16(ace, ACE_BUSMODE, 0x0101); | |
983 | ||
984 | /* read it back to determine endianess */ | |
985 | if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001) | |
986 | ace->reg_ops = &ace_reg_le16_ops; | |
987 | else | |
988 | ace->reg_ops = &ace_reg_be16_ops; | |
989 | } else { | |
990 | ace_out_8(ace, ACE_BUSMODE, 0x00); | |
991 | ace->reg_ops = &ace_reg_8_ops; | |
992 | } | |
993 | ||
994 | /* Make sure version register is sane */ | |
995 | version = ace_in(ace, ACE_VERSION); | |
996 | if ((version == 0) || (version == 0xFFFF)) | |
997 | goto err_read; | |
998 | ||
999 | /* Put sysace in a sane state by clearing most control reg bits */ | |
1000 | ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE | | |
1001 | ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ); | |
1002 | ||
1003 | /* Now we can hook up the irq handler */ | |
1004 | if (ace->irq != NO_IRQ) { | |
1005 | rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace); | |
1006 | if (rc) { | |
1007 | /* Failure - fall back to polled mode */ | |
1008 | dev_err(ace->dev, "request_irq failed\n"); | |
1009 | ace->irq = NO_IRQ; | |
1010 | } | |
1011 | } | |
1012 | ||
1013 | /* Enable interrupts */ | |
1014 | val = ace_in(ace, ACE_CTRL); | |
1015 | val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ; | |
1016 | ace_out(ace, ACE_CTRL, val); | |
1017 | ||
1018 | /* Print the identification */ | |
1019 | dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n", | |
1020 | (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff); | |
1021 | dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n", | |
1022 | ace->physaddr, ace->baseaddr, ace->irq); | |
1023 | ||
1024 | ace->media_change = 1; | |
1025 | ace_revalidate_disk(ace->gd); | |
1026 | ||
1027 | /* Make the sysace device 'live' */ | |
1028 | add_disk(ace->gd); | |
1029 | ||
1030 | return 0; | |
1031 | ||
1032 | err_read: | |
1033 | put_disk(ace->gd); | |
1034 | err_alloc_disk: | |
1035 | blk_cleanup_queue(ace->queue); | |
1036 | err_blk_initq: | |
1037 | iounmap(ace->baseaddr); | |
1038 | err_ioremap: | |
1039 | dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n", | |
1040 | ace->physaddr); | |
1041 | return -ENOMEM; | |
1042 | } | |
1043 | ||
1044 | static void __devexit ace_teardown(struct ace_device *ace) | |
1045 | { | |
1046 | if (ace->gd) { | |
1047 | del_gendisk(ace->gd); | |
1048 | put_disk(ace->gd); | |
1049 | } | |
1050 | ||
1051 | if (ace->queue) | |
1052 | blk_cleanup_queue(ace->queue); | |
1053 | ||
1054 | tasklet_kill(&ace->fsm_tasklet); | |
1055 | ||
1056 | if (ace->irq != NO_IRQ) | |
1057 | free_irq(ace->irq, ace); | |
1058 | ||
1059 | iounmap(ace->baseaddr); | |
1060 | } | |
1061 | ||
1062 | static int __devinit | |
1063 | ace_alloc(struct device *dev, int id, unsigned long physaddr, | |
1064 | int irq, int bus_width) | |
1065 | { | |
1066 | struct ace_device *ace; | |
1067 | int rc; | |
1068 | dev_dbg(dev, "ace_alloc(%p)\n", dev); | |
1069 | ||
1070 | if (!physaddr) { | |
1071 | rc = -ENODEV; | |
1072 | goto err_noreg; | |
1073 | } | |
1074 | ||
1075 | /* Allocate and initialize the ace device structure */ | |
1076 | ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL); | |
1077 | if (!ace) { | |
1078 | rc = -ENOMEM; | |
1079 | goto err_alloc; | |
1080 | } | |
1081 | ||
1082 | ace->dev = dev; | |
1083 | ace->id = id; | |
1084 | ace->physaddr = physaddr; | |
1085 | ace->irq = irq; | |
1086 | ace->bus_width = bus_width; | |
1087 | ||
1088 | /* Call the setup code */ | |
1089 | rc = ace_setup(ace); | |
1090 | if (rc) | |
1091 | goto err_setup; | |
1092 | ||
1093 | dev_set_drvdata(dev, ace); | |
1094 | return 0; | |
1095 | ||
1096 | err_setup: | |
1097 | dev_set_drvdata(dev, NULL); | |
1098 | kfree(ace); | |
1099 | err_alloc: | |
1100 | err_noreg: | |
1101 | dev_err(dev, "could not initialize device, err=%i\n", rc); | |
1102 | return rc; | |
1103 | } | |
1104 | ||
1105 | static void __devexit ace_free(struct device *dev) | |
1106 | { | |
1107 | struct ace_device *ace = dev_get_drvdata(dev); | |
1108 | dev_dbg(dev, "ace_free(%p)\n", dev); | |
1109 | ||
1110 | if (ace) { | |
1111 | ace_teardown(ace); | |
1112 | dev_set_drvdata(dev, NULL); | |
1113 | kfree(ace); | |
1114 | } | |
1115 | } | |
1116 | ||
1117 | /* --------------------------------------------------------------------- | |
1118 | * Platform Bus Support | |
1119 | */ | |
1120 | ||
1121 | static int __devinit ace_probe(struct platform_device *dev) | |
1122 | { | |
1123 | unsigned long physaddr = 0; | |
1124 | int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ | |
1125 | int id = dev->id; | |
1126 | int irq = NO_IRQ; | |
1127 | int i; | |
1128 | ||
1129 | dev_dbg(&dev->dev, "ace_probe(%p)\n", dev); | |
1130 | ||
1131 | for (i = 0; i < dev->num_resources; i++) { | |
1132 | if (dev->resource[i].flags & IORESOURCE_MEM) | |
1133 | physaddr = dev->resource[i].start; | |
1134 | if (dev->resource[i].flags & IORESOURCE_IRQ) | |
1135 | irq = dev->resource[i].start; | |
1136 | } | |
1137 | ||
1138 | /* Call the bus-independant setup code */ | |
1139 | return ace_alloc(&dev->dev, id, physaddr, irq, bus_width); | |
1140 | } | |
1141 | ||
1142 | /* | |
1143 | * Platform bus remove() method | |
1144 | */ | |
1145 | static int __devexit ace_remove(struct platform_device *dev) | |
1146 | { | |
1147 | ace_free(&dev->dev); | |
1148 | return 0; | |
1149 | } | |
1150 | ||
1151 | static struct platform_driver ace_platform_driver = { | |
1152 | .probe = ace_probe, | |
1153 | .remove = __devexit_p(ace_remove), | |
1154 | .driver = { | |
1155 | .owner = THIS_MODULE, | |
1156 | .name = "xsysace", | |
1157 | }, | |
1158 | }; | |
1159 | ||
1160 | /* --------------------------------------------------------------------- | |
1161 | * OF_Platform Bus Support | |
1162 | */ | |
1163 | ||
1164 | #if defined(CONFIG_OF) | |
1165 | static int __devinit | |
1166 | ace_of_probe(struct of_device *op, const struct of_device_id *match) | |
1167 | { | |
1168 | struct resource res; | |
1169 | unsigned long physaddr; | |
1170 | const u32 *id; | |
1171 | int irq, bus_width, rc; | |
1172 | ||
1173 | dev_dbg(&op->dev, "ace_of_probe(%p, %p)\n", op, match); | |
1174 | ||
1175 | /* device id */ | |
1176 | id = of_get_property(op->node, "port-number", NULL); | |
1177 | ||
1178 | /* physaddr */ | |
1179 | rc = of_address_to_resource(op->node, 0, &res); | |
1180 | if (rc) { | |
1181 | dev_err(&op->dev, "invalid address\n"); | |
1182 | return rc; | |
1183 | } | |
1184 | physaddr = res.start; | |
1185 | ||
1186 | /* irq */ | |
1187 | irq = irq_of_parse_and_map(op->node, 0); | |
1188 | ||
1189 | /* bus width */ | |
1190 | bus_width = ACE_BUS_WIDTH_16; | |
1191 | if (of_find_property(op->node, "8-bit", NULL)) | |
1192 | bus_width = ACE_BUS_WIDTH_8; | |
1193 | ||
1194 | /* Call the bus-independant setup code */ | |
1195 | return ace_alloc(&op->dev, id ? *id : 0, physaddr, irq, bus_width); | |
1196 | } | |
1197 | ||
1198 | static int __devexit ace_of_remove(struct of_device *op) | |
1199 | { | |
1200 | ace_free(&op->dev); | |
1201 | return 0; | |
1202 | } | |
1203 | ||
1204 | /* Match table for of_platform binding */ | |
1205 | static struct of_device_id ace_of_match[] __devinitdata = { | |
1206 | { .compatible = "xlnx,opb-sysace-1.00.b", }, | |
1207 | { .compatible = "xlnx,opb-sysace-1.00.c", }, | |
1208 | { .compatible = "xlnx,xps-sysace-1.00.a", }, | |
1209 | {}, | |
1210 | }; | |
1211 | MODULE_DEVICE_TABLE(of, ace_of_match); | |
1212 | ||
1213 | static struct of_platform_driver ace_of_driver = { | |
1214 | .owner = THIS_MODULE, | |
1215 | .name = "xsysace", | |
1216 | .match_table = ace_of_match, | |
1217 | .probe = ace_of_probe, | |
1218 | .remove = __devexit_p(ace_of_remove), | |
1219 | .driver = { | |
1220 | .name = "xsysace", | |
1221 | }, | |
1222 | }; | |
1223 | ||
1224 | /* Registration helpers to keep the number of #ifdefs to a minimum */ | |
1225 | static inline int __init ace_of_register(void) | |
1226 | { | |
1227 | pr_debug("xsysace: registering OF binding\n"); | |
1228 | return of_register_platform_driver(&ace_of_driver); | |
1229 | } | |
1230 | ||
1231 | static inline void __exit ace_of_unregister(void) | |
1232 | { | |
1233 | of_unregister_platform_driver(&ace_of_driver); | |
1234 | } | |
1235 | #else /* CONFIG_OF */ | |
1236 | /* CONFIG_OF not enabled; do nothing helpers */ | |
1237 | static inline int __init ace_of_register(void) { return 0; } | |
1238 | static inline void __exit ace_of_unregister(void) { } | |
1239 | #endif /* CONFIG_OF */ | |
1240 | ||
1241 | /* --------------------------------------------------------------------- | |
1242 | * Module init/exit routines | |
1243 | */ | |
1244 | static int __init ace_init(void) | |
1245 | { | |
1246 | int rc; | |
1247 | ||
1248 | ace_major = register_blkdev(ace_major, "xsysace"); | |
1249 | if (ace_major <= 0) { | |
1250 | rc = -ENOMEM; | |
1251 | goto err_blk; | |
1252 | } | |
1253 | ||
1254 | rc = ace_of_register(); | |
1255 | if (rc) | |
1256 | goto err_of; | |
1257 | ||
1258 | pr_debug("xsysace: registering platform binding\n"); | |
1259 | rc = platform_driver_register(&ace_platform_driver); | |
1260 | if (rc) | |
1261 | goto err_plat; | |
1262 | ||
1263 | pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major); | |
1264 | return 0; | |
1265 | ||
1266 | err_plat: | |
1267 | ace_of_unregister(); | |
1268 | err_of: | |
1269 | unregister_blkdev(ace_major, "xsysace"); | |
1270 | err_blk: | |
1271 | printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc); | |
1272 | return rc; | |
1273 | } | |
1274 | ||
1275 | static void __exit ace_exit(void) | |
1276 | { | |
1277 | pr_debug("Unregistering Xilinx SystemACE driver\n"); | |
1278 | platform_driver_unregister(&ace_platform_driver); | |
1279 | ace_of_unregister(); | |
1280 | unregister_blkdev(ace_major, "xsysace"); | |
1281 | } | |
1282 | ||
1283 | module_init(ace_init); | |
1284 | module_exit(ace_exit); |