]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * Sonics Silicon Backplane | |
3 | * Broadcom MIPS core driver | |
4 | * | |
5 | * Copyright 2005, Broadcom Corporation | |
6 | * Copyright 2006, 2007, Michael Buesch <[email protected]> | |
7 | * | |
8 | * Licensed under the GNU/GPL. See COPYING for details. | |
9 | */ | |
10 | ||
11 | #include <linux/ssb/ssb.h> | |
12 | ||
13 | #include <linux/mtd/physmap.h> | |
14 | #include <linux/serial.h> | |
15 | #include <linux/serial_core.h> | |
16 | #include <linux/serial_reg.h> | |
17 | #include <linux/time.h> | |
18 | #ifdef CONFIG_BCM47XX | |
19 | #include <linux/bcm47xx_nvram.h> | |
20 | #endif | |
21 | ||
22 | #include "ssb_private.h" | |
23 | ||
24 | static const char * const part_probes[] = { "bcm47xxpart", NULL }; | |
25 | ||
26 | static struct physmap_flash_data ssb_pflash_data = { | |
27 | .part_probe_types = part_probes, | |
28 | }; | |
29 | ||
30 | static struct resource ssb_pflash_resource = { | |
31 | .name = "ssb_pflash", | |
32 | .flags = IORESOURCE_MEM, | |
33 | }; | |
34 | ||
35 | struct platform_device ssb_pflash_dev = { | |
36 | .name = "physmap-flash", | |
37 | .dev = { | |
38 | .platform_data = &ssb_pflash_data, | |
39 | }, | |
40 | .resource = &ssb_pflash_resource, | |
41 | .num_resources = 1, | |
42 | }; | |
43 | ||
44 | static inline u32 mips_read32(struct ssb_mipscore *mcore, | |
45 | u16 offset) | |
46 | { | |
47 | return ssb_read32(mcore->dev, offset); | |
48 | } | |
49 | ||
50 | static inline void mips_write32(struct ssb_mipscore *mcore, | |
51 | u16 offset, | |
52 | u32 value) | |
53 | { | |
54 | ssb_write32(mcore->dev, offset, value); | |
55 | } | |
56 | ||
57 | static const u32 ipsflag_irq_mask[] = { | |
58 | 0, | |
59 | SSB_IPSFLAG_IRQ1, | |
60 | SSB_IPSFLAG_IRQ2, | |
61 | SSB_IPSFLAG_IRQ3, | |
62 | SSB_IPSFLAG_IRQ4, | |
63 | }; | |
64 | ||
65 | static const u32 ipsflag_irq_shift[] = { | |
66 | 0, | |
67 | SSB_IPSFLAG_IRQ1_SHIFT, | |
68 | SSB_IPSFLAG_IRQ2_SHIFT, | |
69 | SSB_IPSFLAG_IRQ3_SHIFT, | |
70 | SSB_IPSFLAG_IRQ4_SHIFT, | |
71 | }; | |
72 | ||
73 | static inline u32 ssb_irqflag(struct ssb_device *dev) | |
74 | { | |
75 | u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG); | |
76 | if (tpsflag) | |
77 | return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; | |
78 | else | |
79 | /* not irq supported */ | |
80 | return 0x3f; | |
81 | } | |
82 | ||
83 | static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag) | |
84 | { | |
85 | struct ssb_bus *bus = rdev->bus; | |
86 | int i; | |
87 | for (i = 0; i < bus->nr_devices; i++) { | |
88 | struct ssb_device *dev; | |
89 | dev = &(bus->devices[i]); | |
90 | if (ssb_irqflag(dev) == irqflag) | |
91 | return dev; | |
92 | } | |
93 | return NULL; | |
94 | } | |
95 | ||
96 | /* Get the MIPS IRQ assignment for a specified device. | |
97 | * If unassigned, 0 is returned. | |
98 | * If disabled, 5 is returned. | |
99 | * If not supported, 6 is returned. | |
100 | */ | |
101 | unsigned int ssb_mips_irq(struct ssb_device *dev) | |
102 | { | |
103 | struct ssb_bus *bus = dev->bus; | |
104 | struct ssb_device *mdev = bus->mipscore.dev; | |
105 | u32 irqflag; | |
106 | u32 ipsflag; | |
107 | u32 tmp; | |
108 | unsigned int irq; | |
109 | ||
110 | irqflag = ssb_irqflag(dev); | |
111 | if (irqflag == 0x3f) | |
112 | return 6; | |
113 | ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); | |
114 | for (irq = 1; irq <= 4; irq++) { | |
115 | tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); | |
116 | if (tmp == irqflag) | |
117 | break; | |
118 | } | |
119 | if (irq == 5) { | |
120 | if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)) | |
121 | irq = 0; | |
122 | } | |
123 | ||
124 | return irq; | |
125 | } | |
126 | ||
127 | static void clear_irq(struct ssb_bus *bus, unsigned int irq) | |
128 | { | |
129 | struct ssb_device *dev = bus->mipscore.dev; | |
130 | ||
131 | /* Clear the IRQ in the MIPScore backplane registers */ | |
132 | if (irq == 0) { | |
133 | ssb_write32(dev, SSB_INTVEC, 0); | |
134 | } else { | |
135 | ssb_write32(dev, SSB_IPSFLAG, | |
136 | ssb_read32(dev, SSB_IPSFLAG) | | |
137 | ipsflag_irq_mask[irq]); | |
138 | } | |
139 | } | |
140 | ||
141 | static void set_irq(struct ssb_device *dev, unsigned int irq) | |
142 | { | |
143 | unsigned int oldirq = ssb_mips_irq(dev); | |
144 | struct ssb_bus *bus = dev->bus; | |
145 | struct ssb_device *mdev = bus->mipscore.dev; | |
146 | u32 irqflag = ssb_irqflag(dev); | |
147 | ||
148 | BUG_ON(oldirq == 6); | |
149 | ||
150 | dev->irq = irq + 2; | |
151 | ||
152 | /* clear the old irq */ | |
153 | if (oldirq == 0) | |
154 | ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); | |
155 | else if (oldirq != 5) | |
156 | clear_irq(bus, oldirq); | |
157 | ||
158 | /* assign the new one */ | |
159 | if (irq == 0) { | |
160 | ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); | |
161 | } else { | |
162 | u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG); | |
163 | if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) { | |
164 | u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]; | |
165 | struct ssb_device *olddev = find_device(dev, oldipsflag); | |
166 | if (olddev) | |
167 | set_irq(olddev, 0); | |
168 | } | |
169 | irqflag <<= ipsflag_irq_shift[irq]; | |
170 | irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); | |
171 | ssb_write32(mdev, SSB_IPSFLAG, irqflag); | |
172 | } | |
173 | ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n", | |
174 | dev->id.coreid, oldirq+2, irq+2); | |
175 | } | |
176 | ||
177 | static void print_irq(struct ssb_device *dev, unsigned int irq) | |
178 | { | |
179 | static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; | |
180 | ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n", | |
181 | dev->id.coreid, | |
182 | irq_name[0], irq == 0 ? "*" : " ", | |
183 | irq_name[1], irq == 1 ? "*" : " ", | |
184 | irq_name[2], irq == 2 ? "*" : " ", | |
185 | irq_name[3], irq == 3 ? "*" : " ", | |
186 | irq_name[4], irq == 4 ? "*" : " ", | |
187 | irq_name[5], irq == 5 ? "*" : " ", | |
188 | irq_name[6], irq == 6 ? "*" : " "); | |
189 | } | |
190 | ||
191 | static void dump_irq(struct ssb_bus *bus) | |
192 | { | |
193 | int i; | |
194 | for (i = 0; i < bus->nr_devices; i++) { | |
195 | struct ssb_device *dev; | |
196 | dev = &(bus->devices[i]); | |
197 | print_irq(dev, ssb_mips_irq(dev)); | |
198 | } | |
199 | } | |
200 | ||
201 | static void ssb_mips_serial_init(struct ssb_mipscore *mcore) | |
202 | { | |
203 | struct ssb_bus *bus = mcore->dev->bus; | |
204 | ||
205 | if (ssb_extif_available(&bus->extif)) | |
206 | mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports); | |
207 | else if (ssb_chipco_available(&bus->chipco)) | |
208 | mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports); | |
209 | else | |
210 | mcore->nr_serial_ports = 0; | |
211 | } | |
212 | ||
213 | static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) | |
214 | { | |
215 | struct ssb_bus *bus = mcore->dev->bus; | |
216 | struct ssb_sflash *sflash = &mcore->sflash; | |
217 | struct ssb_pflash *pflash = &mcore->pflash; | |
218 | ||
219 | /* When there is no chipcommon on the bus there is 4MB flash */ | |
220 | if (!ssb_chipco_available(&bus->chipco)) { | |
221 | pflash->present = true; | |
222 | pflash->buswidth = 2; | |
223 | pflash->window = SSB_FLASH1; | |
224 | pflash->window_size = SSB_FLASH1_SZ; | |
225 | goto ssb_pflash; | |
226 | } | |
227 | ||
228 | /* There is ChipCommon, so use it to read info about flash */ | |
229 | switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { | |
230 | case SSB_CHIPCO_FLASHT_STSER: | |
231 | case SSB_CHIPCO_FLASHT_ATSER: | |
232 | pr_debug("Found serial flash\n"); | |
233 | ssb_sflash_init(&bus->chipco); | |
234 | break; | |
235 | case SSB_CHIPCO_FLASHT_PARA: | |
236 | pr_debug("Found parallel flash\n"); | |
237 | pflash->present = true; | |
238 | pflash->window = SSB_FLASH2; | |
239 | pflash->window_size = SSB_FLASH2_SZ; | |
240 | if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) | |
241 | & SSB_CHIPCO_CFG_DS16) == 0) | |
242 | pflash->buswidth = 1; | |
243 | else | |
244 | pflash->buswidth = 2; | |
245 | break; | |
246 | } | |
247 | ||
248 | ssb_pflash: | |
249 | if (sflash->present) { | |
250 | #ifdef CONFIG_BCM47XX | |
251 | bcm47xx_nvram_init_from_mem(sflash->window, sflash->size); | |
252 | #endif | |
253 | } else if (pflash->present) { | |
254 | #ifdef CONFIG_BCM47XX | |
255 | bcm47xx_nvram_init_from_mem(pflash->window, pflash->window_size); | |
256 | #endif | |
257 | ||
258 | ssb_pflash_data.width = pflash->buswidth; | |
259 | ssb_pflash_resource.start = pflash->window; | |
260 | ssb_pflash_resource.end = pflash->window + pflash->window_size; | |
261 | } | |
262 | } | |
263 | ||
264 | u32 ssb_cpu_clock(struct ssb_mipscore *mcore) | |
265 | { | |
266 | struct ssb_bus *bus = mcore->dev->bus; | |
267 | u32 pll_type, n, m, rate = 0; | |
268 | ||
269 | if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) | |
270 | return ssb_pmu_get_cpu_clock(&bus->chipco); | |
271 | ||
272 | if (ssb_extif_available(&bus->extif)) { | |
273 | ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); | |
274 | } else if (ssb_chipco_available(&bus->chipco)) { | |
275 | ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m); | |
276 | } else | |
277 | return 0; | |
278 | ||
279 | if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { | |
280 | rate = 200000000; | |
281 | } else { | |
282 | rate = ssb_calc_clock_rate(pll_type, n, m); | |
283 | } | |
284 | ||
285 | if (pll_type == SSB_PLLTYPE_6) { | |
286 | rate *= 2; | |
287 | } | |
288 | ||
289 | return rate; | |
290 | } | |
291 | ||
292 | void ssb_mipscore_init(struct ssb_mipscore *mcore) | |
293 | { | |
294 | struct ssb_bus *bus; | |
295 | struct ssb_device *dev; | |
296 | unsigned long hz, ns; | |
297 | unsigned int irq, i; | |
298 | ||
299 | if (!mcore->dev) | |
300 | return; /* We don't have a MIPS core */ | |
301 | ||
302 | ssb_dbg("Initializing MIPS core...\n"); | |
303 | ||
304 | bus = mcore->dev->bus; | |
305 | hz = ssb_clockspeed(bus); | |
306 | if (!hz) | |
307 | hz = 100000000; | |
308 | ns = 1000000000 / hz; | |
309 | ||
310 | if (ssb_extif_available(&bus->extif)) | |
311 | ssb_extif_timing_init(&bus->extif, ns); | |
312 | else if (ssb_chipco_available(&bus->chipco)) | |
313 | ssb_chipco_timing_init(&bus->chipco, ns); | |
314 | ||
315 | /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ | |
316 | for (irq = 2, i = 0; i < bus->nr_devices; i++) { | |
317 | int mips_irq; | |
318 | dev = &(bus->devices[i]); | |
319 | mips_irq = ssb_mips_irq(dev); | |
320 | if (mips_irq > 4) | |
321 | dev->irq = 0; | |
322 | else | |
323 | dev->irq = mips_irq + 2; | |
324 | if (dev->irq > 5) | |
325 | continue; | |
326 | switch (dev->id.coreid) { | |
327 | case SSB_DEV_USB11_HOST: | |
328 | /* shouldn't need a separate irq line for non-4710, most of them have a proper | |
329 | * external usb controller on the pci */ | |
330 | if ((bus->chip_id == 0x4710) && (irq <= 4)) { | |
331 | set_irq(dev, irq++); | |
332 | } | |
333 | break; | |
334 | case SSB_DEV_PCI: | |
335 | case SSB_DEV_ETHERNET: | |
336 | case SSB_DEV_ETHERNET_GBIT: | |
337 | case SSB_DEV_80211: | |
338 | case SSB_DEV_USB20_HOST: | |
339 | /* These devices get their own IRQ line if available, the rest goes on IRQ0 */ | |
340 | if (irq <= 4) { | |
341 | set_irq(dev, irq++); | |
342 | break; | |
343 | } | |
344 | /* fallthrough */ | |
345 | case SSB_DEV_EXTIF: | |
346 | set_irq(dev, 0); | |
347 | break; | |
348 | } | |
349 | } | |
350 | ssb_dbg("after irq reconfiguration\n"); | |
351 | dump_irq(bus); | |
352 | ||
353 | ssb_mips_serial_init(mcore); | |
354 | ssb_mips_flash_detect(mcore); | |
355 | } |