]>
Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * topic.h 1.8 1999/08/28 04:01:47 | |
3 | * | |
4 | * The contents of this file are subject to the Mozilla Public License | |
5 | * Version 1.1 (the "License"); you may not use this file except in | |
6 | * compliance with the License. You may obtain a copy of the License | |
7 | * at http://www.mozilla.org/MPL/ | |
8 | * | |
9 | * Software distributed under the License is distributed on an "AS IS" | |
10 | * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See | |
11 | * the License for the specific language governing rights and | |
12 | * limitations under the License. | |
13 | * | |
14 | * The initial developer of the original code is David A. Hinds | |
15 | * <[email protected]>. Portions created by David A. Hinds | |
16 | * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
17 | * | |
18 | * Alternatively, the contents of this file may be used under the | |
19 | * terms of the GNU General Public License version 2 (the "GPL"), in which | |
20 | * case the provisions of the GPL are applicable instead of the | |
21 | * above. If you wish to allow the use of your version of this file | |
22 | * only under the terms of the GPL and not to allow others to use | |
23 | * your version of this file under the MPL, indicate your decision by | |
24 | * deleting the provisions above and replace them with the notice and | |
25 | * other provisions required by the GPL. If you do not delete the | |
26 | * provisions above, a recipient may use your version of this file | |
27 | * under either the MPL or the GPL. | |
28 | * topic.h $Release$ 1999/08/28 04:01:47 | |
29 | */ | |
30 | ||
31 | #ifndef _LINUX_TOPIC_H | |
32 | #define _LINUX_TOPIC_H | |
33 | ||
34 | /* Register definitions for Toshiba ToPIC95/97/100 controllers */ | |
35 | ||
36 | #define TOPIC_SOCKET_CONTROL 0x0090 /* 32 bit */ | |
37 | #define TOPIC_SCR_IRQSEL 0x00000001 | |
38 | ||
39 | #define TOPIC_SLOT_CONTROL 0x00a0 /* 8 bit */ | |
40 | #define TOPIC_SLOT_SLOTON 0x80 | |
41 | #define TOPIC_SLOT_SLOTEN 0x40 | |
42 | #define TOPIC_SLOT_ID_LOCK 0x20 | |
43 | #define TOPIC_SLOT_ID_WP 0x10 | |
44 | #define TOPIC_SLOT_PORT_MASK 0x0c | |
45 | #define TOPIC_SLOT_PORT_SHIFT 2 | |
46 | #define TOPIC_SLOT_OFS_MASK 0x03 | |
47 | ||
48 | #define TOPIC_CARD_CONTROL 0x00a1 /* 8 bit */ | |
49 | #define TOPIC_CCR_INTB 0x20 | |
50 | #define TOPIC_CCR_INTA 0x10 | |
51 | #define TOPIC_CCR_CLOCK 0x0c | |
52 | #define TOPIC_CCR_PCICLK 0x0c | |
53 | #define TOPIC_CCR_PCICLK_2 0x08 | |
54 | #define TOPIC_CCR_CCLK 0x04 | |
55 | ||
56 | #define TOPIC97_INT_CONTROL 0x00a1 /* 8 bit */ | |
57 | #define TOPIC97_ICR_INTB 0x20 | |
58 | #define TOPIC97_ICR_INTA 0x10 | |
59 | #define TOPIC97_ICR_STSIRQNP 0x04 | |
60 | #define TOPIC97_ICR_IRQNP 0x02 | |
61 | #define TOPIC97_ICR_IRQSEL 0x01 | |
62 | ||
63 | #define TOPIC_CARD_DETECT 0x00a3 /* 8 bit */ | |
64 | #define TOPIC_CDR_MODE_PC32 0x80 | |
65 | #define TOPIC_CDR_VS1 0x04 | |
66 | #define TOPIC_CDR_VS2 0x02 | |
67 | #define TOPIC_CDR_SW_DETECT 0x01 | |
68 | ||
69 | #define TOPIC_REGISTER_CONTROL 0x00a4 /* 32 bit */ | |
70 | #define TOPIC_RCR_RESUME_RESET 0x80000000 | |
71 | #define TOPIC_RCR_REMOVE_RESET 0x40000000 | |
72 | #define TOPIC97_RCR_CLKRUN_ENA 0x20000000 | |
73 | #define TOPIC97_RCR_TESTMODE 0x10000000 | |
74 | #define TOPIC97_RCR_IOPLUP 0x08000000 | |
75 | #define TOPIC_RCR_BUFOFF_PWROFF 0x02000000 | |
76 | #define TOPIC_RCR_BUFOFF_SIGOFF 0x01000000 | |
77 | #define TOPIC97_RCR_CB_DEV_MASK 0x0000f800 | |
78 | #define TOPIC97_RCR_CB_DEV_SHIFT 11 | |
79 | #define TOPIC97_RCR_RI_DISABLE 0x00000004 | |
80 | #define TOPIC97_RCR_CAUDIO_OFF 0x00000002 | |
81 | #define TOPIC_RCR_CAUDIO_INVERT 0x00000001 | |
82 | ||
83 | #define TOPIC97_MISC1 0x00ad /* 8bit */ | |
84 | #define TOPIC97_MISC1_CLOCKRUN_ENABLE 0x80 | |
85 | #define TOPIC97_MISC1_CLOCKRUN_MODE 0x40 | |
86 | #define TOPIC97_MISC1_DETECT_REQ_ENA 0x10 | |
87 | #define TOPIC97_MISC1_SCK_CLEAR_DIS 0x04 | |
88 | #define TOPIC97_MISC1_R2_LOW_ENABLE 0x10 | |
89 | ||
90 | #define TOPIC97_MISC2 0x00ae /* 8 bit */ | |
91 | #define TOPIC97_MISC2_SPWRCLK_MASK 0x70 | |
92 | #define TOPIC97_MISC2_SPWRMOD 0x08 | |
93 | #define TOPIC97_MISC2_SPWR_ENABLE 0x04 | |
94 | #define TOPIC97_MISC2_ZV_MODE 0x02 | |
95 | #define TOPIC97_MISC2_ZV_ENABLE 0x01 | |
96 | ||
97 | #define TOPIC97_ZOOM_VIDEO_CONTROL 0x009c /* 8 bit */ | |
98 | #define TOPIC97_ZV_CONTROL_ENABLE 0x01 | |
99 | ||
100 | #define TOPIC97_AUDIO_VIDEO_SWITCH 0x003c /* 8 bit */ | |
101 | #define TOPIC97_AVS_AUDIO_CONTROL 0x02 | |
102 | #define TOPIC97_AVS_VIDEO_CONTROL 0x01 | |
103 | ||
ea2f1590 DR |
104 | #define TOPIC_EXCA_IF_CONTROL 0x3e /* 8 bit */ |
105 | #define TOPIC_EXCA_IFC_33V_ENA 0x01 | |
1da177e4 LT |
106 | |
107 | static void topic97_zoom_video(struct pcmcia_socket *sock, int onoff) | |
108 | { | |
109 | struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); | |
110 | u8 reg_zv, reg; | |
111 | ||
112 | reg_zv = config_readb(socket, TOPIC97_ZOOM_VIDEO_CONTROL); | |
113 | if (onoff) { | |
114 | reg_zv |= TOPIC97_ZV_CONTROL_ENABLE; | |
115 | config_writeb(socket, TOPIC97_ZOOM_VIDEO_CONTROL, reg_zv); | |
116 | ||
117 | reg = config_readb(socket, TOPIC97_MISC2); | |
118 | reg |= TOPIC97_MISC2_ZV_ENABLE; | |
119 | config_writeb(socket, TOPIC97_MISC2, reg); | |
120 | ||
121 | /* not sure this is needed, doc is unclear */ | |
122 | #if 0 | |
123 | reg = config_readb(socket, TOPIC97_AUDIO_VIDEO_SWITCH); | |
124 | reg |= TOPIC97_AVS_AUDIO_CONTROL | TOPIC97_AVS_VIDEO_CONTROL; | |
125 | config_writeb(socket, TOPIC97_AUDIO_VIDEO_SWITCH, reg); | |
126 | #endif | |
127 | } | |
128 | else { | |
129 | reg_zv &= ~TOPIC97_ZV_CONTROL_ENABLE; | |
130 | config_writeb(socket, TOPIC97_ZOOM_VIDEO_CONTROL, reg_zv); | |
131 | } | |
132 | ||
133 | } | |
134 | ||
135 | static int topic97_override(struct yenta_socket *socket) | |
136 | { | |
137 | /* ToPIC97/100 support ZV */ | |
138 | socket->socket.zoom_video = topic97_zoom_video; | |
139 | return 0; | |
140 | } | |
141 | ||
ea2f1590 DR |
142 | |
143 | static int topic95_override(struct yenta_socket *socket) | |
144 | { | |
145 | u8 fctrl; | |
146 | ||
147 | /* enable 3.3V support for 16bit cards */ | |
148 | fctrl = exca_readb(socket, TOPIC_EXCA_IF_CONTROL); | |
149 | exca_writeb(socket, TOPIC_EXCA_IF_CONTROL, fctrl | TOPIC_EXCA_IFC_33V_ENA); | |
150 | ||
151 | /* tell yenta to use exca registers to power 16bit cards */ | |
152 | socket->flags |= YENTA_16BIT_POWER_EXCA | YENTA_16BIT_POWER_DF; | |
153 | ||
154 | return 0; | |
155 | } | |
156 | ||
1da177e4 | 157 | #endif /* _LINUX_TOPIC_H */ |