]>
Commit | Line | Data |
---|---|---|
a412ae3f DW |
1 | /* |
2 | * A driver for the Integrated Circuits ICS932S401 | |
3 | * Copyright (C) 2008 IBM | |
4 | * | |
5 | * Author: Darrick J. Wong <[email protected]> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
20 | */ | |
21 | ||
22 | #include <linux/module.h> | |
23 | #include <linux/jiffies.h> | |
24 | #include <linux/i2c.h> | |
25 | #include <linux/err.h> | |
26 | #include <linux/mutex.h> | |
27 | #include <linux/delay.h> | |
28 | #include <linux/log2.h> | |
29 | ||
30 | /* Addresses to scan */ | |
31 | static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; | |
32 | ||
33 | /* Insmod parameters */ | |
34 | I2C_CLIENT_INSMOD_1(ics932s401); | |
35 | ||
36 | /* ICS932S401 registers */ | |
37 | #define ICS932S401_REG_CFG2 0x01 | |
38 | #define ICS932S401_CFG1_SPREAD 0x01 | |
39 | #define ICS932S401_REG_CFG7 0x06 | |
40 | #define ICS932S401_FS_MASK 0x07 | |
41 | #define ICS932S401_REG_VENDOR_REV 0x07 | |
42 | #define ICS932S401_VENDOR 1 | |
43 | #define ICS932S401_VENDOR_MASK 0x0F | |
44 | #define ICS932S401_REV 4 | |
45 | #define ICS932S401_REV_SHIFT 4 | |
46 | #define ICS932S401_REG_DEVICE 0x09 | |
47 | #define ICS932S401_DEVICE 11 | |
48 | #define ICS932S401_REG_CTRL 0x0A | |
49 | #define ICS932S401_MN_ENABLED 0x80 | |
50 | #define ICS932S401_CPU_ALT 0x04 | |
51 | #define ICS932S401_SRC_ALT 0x08 | |
52 | #define ICS932S401_REG_CPU_M_CTRL 0x0B | |
53 | #define ICS932S401_M_MASK 0x3F | |
54 | #define ICS932S401_REG_CPU_N_CTRL 0x0C | |
55 | #define ICS932S401_REG_CPU_SPREAD1 0x0D | |
56 | #define ICS932S401_REG_CPU_SPREAD2 0x0E | |
57 | #define ICS932S401_SPREAD_MASK 0x7FFF | |
58 | #define ICS932S401_REG_SRC_M_CTRL 0x0F | |
59 | #define ICS932S401_REG_SRC_N_CTRL 0x10 | |
60 | #define ICS932S401_REG_SRC_SPREAD1 0x11 | |
61 | #define ICS932S401_REG_SRC_SPREAD2 0x12 | |
62 | #define ICS932S401_REG_CPU_DIVISOR 0x13 | |
63 | #define ICS932S401_CPU_DIVISOR_SHIFT 4 | |
64 | #define ICS932S401_REG_PCISRC_DIVISOR 0x14 | |
65 | #define ICS932S401_SRC_DIVISOR_MASK 0x0F | |
66 | #define ICS932S401_PCI_DIVISOR_SHIFT 4 | |
67 | ||
68 | /* Base clock is 14.318MHz */ | |
69 | #define BASE_CLOCK 14318 | |
70 | ||
71 | #define NUM_REGS 21 | |
72 | #define NUM_MIRRORED_REGS 15 | |
73 | ||
74 | static int regs_to_copy[NUM_MIRRORED_REGS] = { | |
75 | ICS932S401_REG_CFG2, | |
76 | ICS932S401_REG_CFG7, | |
77 | ICS932S401_REG_VENDOR_REV, | |
78 | ICS932S401_REG_DEVICE, | |
79 | ICS932S401_REG_CTRL, | |
80 | ICS932S401_REG_CPU_M_CTRL, | |
81 | ICS932S401_REG_CPU_N_CTRL, | |
82 | ICS932S401_REG_CPU_SPREAD1, | |
83 | ICS932S401_REG_CPU_SPREAD2, | |
84 | ICS932S401_REG_SRC_M_CTRL, | |
85 | ICS932S401_REG_SRC_N_CTRL, | |
86 | ICS932S401_REG_SRC_SPREAD1, | |
87 | ICS932S401_REG_SRC_SPREAD2, | |
88 | ICS932S401_REG_CPU_DIVISOR, | |
89 | ICS932S401_REG_PCISRC_DIVISOR, | |
90 | }; | |
91 | ||
92 | /* How often do we reread sensors values? (In jiffies) */ | |
93 | #define SENSOR_REFRESH_INTERVAL (2 * HZ) | |
94 | ||
95 | /* How often do we reread sensor limit values? (In jiffies) */ | |
96 | #define LIMIT_REFRESH_INTERVAL (60 * HZ) | |
97 | ||
98 | struct ics932s401_data { | |
99 | struct attribute_group attrs; | |
100 | struct mutex lock; | |
101 | char sensors_valid; | |
102 | unsigned long sensors_last_updated; /* In jiffies */ | |
103 | ||
104 | u8 regs[NUM_REGS]; | |
105 | }; | |
106 | ||
107 | static int ics932s401_probe(struct i2c_client *client, | |
108 | const struct i2c_device_id *id); | |
109 | static int ics932s401_detect(struct i2c_client *client, int kind, | |
110 | struct i2c_board_info *info); | |
111 | static int ics932s401_remove(struct i2c_client *client); | |
112 | ||
113 | static const struct i2c_device_id ics932s401_id[] = { | |
114 | { "ics932s401", ics932s401 }, | |
115 | { } | |
116 | }; | |
117 | MODULE_DEVICE_TABLE(i2c, ics932s401_id); | |
118 | ||
119 | static struct i2c_driver ics932s401_driver = { | |
120 | .class = I2C_CLASS_HWMON, | |
121 | .driver = { | |
122 | .name = "ics932s401", | |
123 | }, | |
124 | .probe = ics932s401_probe, | |
125 | .remove = ics932s401_remove, | |
126 | .id_table = ics932s401_id, | |
127 | .detect = ics932s401_detect, | |
128 | .address_data = &addr_data, | |
129 | }; | |
130 | ||
131 | static struct ics932s401_data *ics932s401_update_device(struct device *dev) | |
132 | { | |
133 | struct i2c_client *client = to_i2c_client(dev); | |
134 | struct ics932s401_data *data = i2c_get_clientdata(client); | |
135 | unsigned long local_jiffies = jiffies; | |
136 | int i, temp; | |
137 | ||
138 | mutex_lock(&data->lock); | |
139 | if (time_before(local_jiffies, data->sensors_last_updated + | |
140 | SENSOR_REFRESH_INTERVAL) | |
141 | && data->sensors_valid) | |
142 | goto out; | |
143 | ||
144 | /* | |
145 | * Each register must be read as a word and then right shifted 8 bits. | |
146 | * Not really sure why this is; setting the "byte count programming" | |
147 | * register to 1 does not fix this problem. | |
148 | */ | |
149 | for (i = 0; i < NUM_MIRRORED_REGS; i++) { | |
150 | temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); | |
151 | data->regs[regs_to_copy[i]] = temp >> 8; | |
152 | } | |
153 | ||
154 | data->sensors_last_updated = local_jiffies; | |
155 | data->sensors_valid = 1; | |
156 | ||
157 | out: | |
158 | mutex_unlock(&data->lock); | |
159 | return data; | |
160 | } | |
161 | ||
162 | static ssize_t show_spread_enabled(struct device *dev, | |
163 | struct device_attribute *devattr, | |
164 | char *buf) | |
165 | { | |
166 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
167 | ||
168 | if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) | |
169 | return sprintf(buf, "1\n"); | |
170 | ||
171 | return sprintf(buf, "0\n"); | |
172 | } | |
173 | ||
174 | /* bit to cpu khz map */ | |
175 | static const int fs_speeds[] = { | |
176 | 266666, | |
177 | 133333, | |
178 | 200000, | |
179 | 166666, | |
180 | 333333, | |
181 | 100000, | |
182 | 400000, | |
183 | 0, | |
184 | }; | |
185 | ||
186 | /* clock divisor map */ | |
187 | static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, | |
188 | 24, 40, 120}; | |
189 | ||
190 | /* Calculate CPU frequency from the M/N registers. */ | |
191 | static int calculate_cpu_freq(struct ics932s401_data *data) | |
192 | { | |
193 | int m, n, freq; | |
194 | ||
195 | m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; | |
196 | n = data->regs[ICS932S401_REG_CPU_N_CTRL]; | |
197 | ||
198 | /* Pull in bits 8 & 9 from the M register */ | |
199 | n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; | |
200 | n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; | |
201 | ||
202 | freq = BASE_CLOCK * (n + 8) / (m + 2); | |
203 | freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> | |
204 | ICS932S401_CPU_DIVISOR_SHIFT]; | |
205 | ||
206 | return freq; | |
207 | } | |
208 | ||
209 | static ssize_t show_cpu_clock(struct device *dev, | |
210 | struct device_attribute *devattr, | |
211 | char *buf) | |
212 | { | |
213 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
214 | ||
215 | return sprintf(buf, "%d\n", calculate_cpu_freq(data)); | |
216 | } | |
217 | ||
218 | static ssize_t show_cpu_clock_sel(struct device *dev, | |
219 | struct device_attribute *devattr, | |
220 | char *buf) | |
221 | { | |
222 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
223 | int freq; | |
224 | ||
225 | if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) | |
226 | freq = calculate_cpu_freq(data); | |
227 | else { | |
228 | /* Freq is neatly wrapped up for us */ | |
229 | int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; | |
230 | freq = fs_speeds[fid]; | |
231 | if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { | |
232 | switch (freq) { | |
233 | case 166666: | |
234 | freq = 160000; | |
235 | break; | |
236 | case 333333: | |
237 | freq = 320000; | |
238 | break; | |
239 | } | |
240 | } | |
241 | } | |
242 | ||
243 | return sprintf(buf, "%d\n", freq); | |
244 | } | |
245 | ||
246 | /* Calculate SRC frequency from the M/N registers. */ | |
247 | static int calculate_src_freq(struct ics932s401_data *data) | |
248 | { | |
249 | int m, n, freq; | |
250 | ||
251 | m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; | |
252 | n = data->regs[ICS932S401_REG_SRC_N_CTRL]; | |
253 | ||
254 | /* Pull in bits 8 & 9 from the M register */ | |
255 | n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; | |
256 | n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; | |
257 | ||
258 | freq = BASE_CLOCK * (n + 8) / (m + 2); | |
259 | freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & | |
260 | ICS932S401_SRC_DIVISOR_MASK]; | |
261 | ||
262 | return freq; | |
263 | } | |
264 | ||
265 | static ssize_t show_src_clock(struct device *dev, | |
266 | struct device_attribute *devattr, | |
267 | char *buf) | |
268 | { | |
269 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
270 | ||
271 | return sprintf(buf, "%d\n", calculate_src_freq(data)); | |
272 | } | |
273 | ||
274 | static ssize_t show_src_clock_sel(struct device *dev, | |
275 | struct device_attribute *devattr, | |
276 | char *buf) | |
277 | { | |
278 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
279 | int freq; | |
280 | ||
281 | if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) | |
282 | freq = calculate_src_freq(data); | |
283 | else | |
284 | /* Freq is neatly wrapped up for us */ | |
285 | if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && | |
286 | data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) | |
287 | freq = 96000; | |
288 | else | |
289 | freq = 100000; | |
290 | ||
291 | return sprintf(buf, "%d\n", freq); | |
292 | } | |
293 | ||
294 | /* Calculate PCI frequency from the SRC M/N registers. */ | |
295 | static int calculate_pci_freq(struct ics932s401_data *data) | |
296 | { | |
297 | int m, n, freq; | |
298 | ||
299 | m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; | |
300 | n = data->regs[ICS932S401_REG_SRC_N_CTRL]; | |
301 | ||
302 | /* Pull in bits 8 & 9 from the M register */ | |
303 | n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; | |
304 | n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; | |
305 | ||
306 | freq = BASE_CLOCK * (n + 8) / (m + 2); | |
307 | freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> | |
308 | ICS932S401_PCI_DIVISOR_SHIFT]; | |
309 | ||
310 | return freq; | |
311 | } | |
312 | ||
313 | static ssize_t show_pci_clock(struct device *dev, | |
314 | struct device_attribute *devattr, | |
315 | char *buf) | |
316 | { | |
317 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
318 | ||
319 | return sprintf(buf, "%d\n", calculate_pci_freq(data)); | |
320 | } | |
321 | ||
322 | static ssize_t show_pci_clock_sel(struct device *dev, | |
323 | struct device_attribute *devattr, | |
324 | char *buf) | |
325 | { | |
326 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
327 | int freq; | |
328 | ||
329 | if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) | |
330 | freq = calculate_pci_freq(data); | |
331 | else | |
332 | freq = 33333; | |
333 | ||
334 | return sprintf(buf, "%d\n", freq); | |
335 | } | |
336 | ||
337 | static ssize_t show_value(struct device *dev, | |
338 | struct device_attribute *devattr, | |
339 | char *buf); | |
340 | ||
341 | static ssize_t show_spread(struct device *dev, | |
342 | struct device_attribute *devattr, | |
343 | char *buf); | |
344 | ||
345 | static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); | |
346 | static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); | |
347 | static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); | |
348 | static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); | |
349 | static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); | |
350 | static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); | |
351 | static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); | |
352 | static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); | |
353 | static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); | |
354 | static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); | |
355 | static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); | |
356 | ||
357 | static struct attribute *ics932s401_attr[] = | |
358 | { | |
359 | &dev_attr_spread_enabled.attr, | |
360 | &dev_attr_cpu_clock_selection.attr, | |
361 | &dev_attr_cpu_clock.attr, | |
362 | &dev_attr_src_clock_selection.attr, | |
363 | &dev_attr_src_clock.attr, | |
364 | &dev_attr_pci_clock_selection.attr, | |
365 | &dev_attr_pci_clock.attr, | |
366 | &dev_attr_usb_clock.attr, | |
367 | &dev_attr_ref_clock.attr, | |
368 | &dev_attr_cpu_spread.attr, | |
369 | &dev_attr_src_spread.attr, | |
370 | NULL | |
371 | }; | |
372 | ||
373 | static ssize_t show_value(struct device *dev, | |
374 | struct device_attribute *devattr, | |
375 | char *buf) | |
376 | { | |
377 | int x; | |
378 | ||
379 | if (devattr == &dev_attr_usb_clock) | |
380 | x = 48000; | |
381 | else if (devattr == &dev_attr_ref_clock) | |
382 | x = BASE_CLOCK; | |
383 | else | |
384 | BUG(); | |
385 | ||
386 | return sprintf(buf, "%d\n", x); | |
387 | } | |
388 | ||
389 | static ssize_t show_spread(struct device *dev, | |
390 | struct device_attribute *devattr, | |
391 | char *buf) | |
392 | { | |
393 | struct ics932s401_data *data = ics932s401_update_device(dev); | |
394 | int reg; | |
395 | unsigned long val; | |
396 | ||
397 | if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) | |
398 | return sprintf(buf, "0%%\n"); | |
399 | ||
400 | if (devattr == &dev_attr_src_spread) | |
401 | reg = ICS932S401_REG_SRC_SPREAD1; | |
402 | else if (devattr == &dev_attr_cpu_spread) | |
403 | reg = ICS932S401_REG_CPU_SPREAD1; | |
404 | else | |
405 | BUG(); | |
406 | ||
407 | val = data->regs[reg] | (data->regs[reg + 1] << 8); | |
408 | val &= ICS932S401_SPREAD_MASK; | |
409 | ||
410 | /* Scale 0..2^14 to -0.5. */ | |
411 | val = 500000 * val / 16384; | |
412 | return sprintf(buf, "-0.%lu%%\n", val); | |
413 | } | |
414 | ||
415 | /* Return 0 if detection is successful, -ENODEV otherwise */ | |
416 | static int ics932s401_detect(struct i2c_client *client, int kind, | |
417 | struct i2c_board_info *info) | |
418 | { | |
419 | struct i2c_adapter *adapter = client->adapter; | |
420 | ||
421 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
422 | return -ENODEV; | |
423 | ||
424 | if (kind <= 0) { | |
425 | int vendor, device, revision; | |
426 | ||
427 | vendor = i2c_smbus_read_word_data(client, | |
428 | ICS932S401_REG_VENDOR_REV); | |
429 | vendor >>= 8; | |
430 | revision = vendor >> ICS932S401_REV_SHIFT; | |
431 | vendor &= ICS932S401_VENDOR_MASK; | |
432 | if (vendor != ICS932S401_VENDOR) | |
433 | return -ENODEV; | |
434 | ||
435 | device = i2c_smbus_read_word_data(client, | |
436 | ICS932S401_REG_DEVICE); | |
437 | device >>= 8; | |
438 | if (device != ICS932S401_DEVICE) | |
439 | return -ENODEV; | |
440 | ||
441 | if (revision != ICS932S401_REV) | |
442 | dev_info(&adapter->dev, "Unknown revision %d\n", | |
443 | revision); | |
444 | } else | |
445 | dev_dbg(&adapter->dev, "detection forced\n"); | |
446 | ||
447 | strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); | |
448 | ||
449 | return 0; | |
450 | } | |
451 | ||
452 | static int ics932s401_probe(struct i2c_client *client, | |
453 | const struct i2c_device_id *id) | |
454 | { | |
455 | struct ics932s401_data *data; | |
456 | int err; | |
457 | ||
458 | data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); | |
459 | if (!data) { | |
460 | err = -ENOMEM; | |
461 | goto exit; | |
462 | } | |
463 | ||
464 | i2c_set_clientdata(client, data); | |
465 | mutex_init(&data->lock); | |
466 | ||
467 | dev_info(&client->dev, "%s chip found\n", client->name); | |
468 | ||
469 | /* Register sysfs hooks */ | |
470 | data->attrs.attrs = ics932s401_attr; | |
471 | err = sysfs_create_group(&client->dev.kobj, &data->attrs); | |
472 | if (err) | |
473 | goto exit_free; | |
474 | ||
475 | return 0; | |
476 | ||
477 | exit_free: | |
478 | kfree(data); | |
479 | exit: | |
480 | return err; | |
481 | } | |
482 | ||
483 | static int ics932s401_remove(struct i2c_client *client) | |
484 | { | |
485 | struct ics932s401_data *data = i2c_get_clientdata(client); | |
486 | ||
487 | sysfs_remove_group(&client->dev.kobj, &data->attrs); | |
488 | kfree(data); | |
489 | return 0; | |
490 | } | |
491 | ||
492 | static int __init ics932s401_init(void) | |
493 | { | |
494 | return i2c_add_driver(&ics932s401_driver); | |
495 | } | |
496 | ||
497 | static void __exit ics932s401_exit(void) | |
498 | { | |
499 | i2c_del_driver(&ics932s401_driver); | |
500 | } | |
501 | ||
502 | MODULE_AUTHOR("Darrick J. Wong <[email protected]>"); | |
503 | MODULE_DESCRIPTION("ICS932S401 driver"); | |
504 | MODULE_LICENSE("GPL"); | |
505 | ||
506 | module_init(ics932s401_init); | |
507 | module_exit(ics932s401_exit); | |
508 | ||
509 | /* IBM IntelliStation Z30 */ | |
510 | MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); | |
511 | MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); | |
512 | ||
513 | /* IBM x3650/x3550 */ | |
514 | MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); | |
515 | MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); |