]>
Commit | Line | Data |
---|---|---|
eff1a59c MW |
1 | |
2 | /* | |
3 | * Common code for mac80211 Prism54 drivers | |
4 | * | |
5 | * Copyright (c) 2006, Michael Wu <[email protected]> | |
6 | * Copyright (c) 2007, Christian Lamparter <[email protected]> | |
7 | * | |
8 | * Based on the islsm (softmac prism54) driver, which is: | |
9 | * Copyright 2004-2006 Jean-Baptiste Note <[email protected]>, et al. | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License version 2 as | |
13 | * published by the Free Software Foundation. | |
14 | */ | |
15 | ||
16 | #include <linux/init.h> | |
17 | #include <linux/firmware.h> | |
18 | #include <linux/etherdevice.h> | |
19 | ||
20 | #include <net/mac80211.h> | |
21 | ||
22 | #include "p54.h" | |
23 | #include "p54common.h" | |
24 | ||
25 | MODULE_AUTHOR("Michael Wu <[email protected]>"); | |
26 | MODULE_DESCRIPTION("Softmac Prism54 common code"); | |
27 | MODULE_LICENSE("GPL"); | |
28 | MODULE_ALIAS("prism54common"); | |
29 | ||
8318d78a JB |
30 | static struct ieee80211_rate p54_rates[] = { |
31 | { .bitrate = 10, .hw_value = 0, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
32 | { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
33 | { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
34 | { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | |
35 | { .bitrate = 60, .hw_value = 4, }, | |
36 | { .bitrate = 90, .hw_value = 5, }, | |
37 | { .bitrate = 120, .hw_value = 6, }, | |
38 | { .bitrate = 180, .hw_value = 7, }, | |
39 | { .bitrate = 240, .hw_value = 8, }, | |
40 | { .bitrate = 360, .hw_value = 9, }, | |
41 | { .bitrate = 480, .hw_value = 10, }, | |
42 | { .bitrate = 540, .hw_value = 11, }, | |
43 | }; | |
44 | ||
45 | static struct ieee80211_channel p54_channels[] = { | |
46 | { .center_freq = 2412, .hw_value = 1, }, | |
47 | { .center_freq = 2417, .hw_value = 2, }, | |
48 | { .center_freq = 2422, .hw_value = 3, }, | |
49 | { .center_freq = 2427, .hw_value = 4, }, | |
50 | { .center_freq = 2432, .hw_value = 5, }, | |
51 | { .center_freq = 2437, .hw_value = 6, }, | |
52 | { .center_freq = 2442, .hw_value = 7, }, | |
53 | { .center_freq = 2447, .hw_value = 8, }, | |
54 | { .center_freq = 2452, .hw_value = 9, }, | |
55 | { .center_freq = 2457, .hw_value = 10, }, | |
56 | { .center_freq = 2462, .hw_value = 11, }, | |
57 | { .center_freq = 2467, .hw_value = 12, }, | |
58 | { .center_freq = 2472, .hw_value = 13, }, | |
59 | { .center_freq = 2484, .hw_value = 14, }, | |
60 | }; | |
61 | ||
c2976ab0 | 62 | static struct ieee80211_supported_band band_2GHz = { |
8318d78a JB |
63 | .channels = p54_channels, |
64 | .n_channels = ARRAY_SIZE(p54_channels), | |
65 | .bitrates = p54_rates, | |
66 | .n_bitrates = ARRAY_SIZE(p54_rates), | |
67 | }; | |
68 | ||
69 | ||
eff1a59c MW |
70 | void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw) |
71 | { | |
72 | struct p54_common *priv = dev->priv; | |
73 | struct bootrec_exp_if *exp_if; | |
74 | struct bootrec *bootrec; | |
75 | u32 *data = (u32 *)fw->data; | |
76 | u32 *end_data = (u32 *)fw->data + (fw->size >> 2); | |
77 | u8 *fw_version = NULL; | |
78 | size_t len; | |
79 | int i; | |
80 | ||
81 | if (priv->rx_start) | |
82 | return; | |
83 | ||
84 | while (data < end_data && *data) | |
85 | data++; | |
86 | ||
87 | while (data < end_data && !*data) | |
88 | data++; | |
89 | ||
90 | bootrec = (struct bootrec *) data; | |
91 | ||
92 | while (bootrec->data <= end_data && | |
93 | (bootrec->data + (len = le32_to_cpu(bootrec->len))) <= end_data) { | |
94 | u32 code = le32_to_cpu(bootrec->code); | |
95 | switch (code) { | |
96 | case BR_CODE_COMPONENT_ID: | |
dc73c623 | 97 | switch (be32_to_cpu(*(__be32 *)bootrec->data)) { |
eff1a59c MW |
98 | case FW_FMAC: |
99 | printk(KERN_INFO "p54: FreeMAC firmware\n"); | |
100 | break; | |
101 | case FW_LM20: | |
102 | printk(KERN_INFO "p54: LM20 firmware\n"); | |
103 | break; | |
104 | case FW_LM86: | |
105 | printk(KERN_INFO "p54: LM86 firmware\n"); | |
106 | break; | |
107 | case FW_LM87: | |
108 | printk(KERN_INFO "p54: LM87 firmware - not supported yet!\n"); | |
109 | break; | |
110 | default: | |
111 | printk(KERN_INFO "p54: unknown firmware\n"); | |
112 | break; | |
113 | } | |
114 | break; | |
115 | case BR_CODE_COMPONENT_VERSION: | |
116 | /* 24 bytes should be enough for all firmwares */ | |
117 | if (strnlen((unsigned char*)bootrec->data, 24) < 24) | |
118 | fw_version = (unsigned char*)bootrec->data; | |
119 | break; | |
120 | case BR_CODE_DESCR: | |
dc73c623 | 121 | priv->rx_start = le32_to_cpu(((__le32 *)bootrec->data)[1]); |
eff1a59c | 122 | /* FIXME add sanity checking */ |
dc73c623 | 123 | priv->rx_end = le32_to_cpu(((__le32 *)bootrec->data)[2]) - 0x3500; |
eff1a59c MW |
124 | break; |
125 | case BR_CODE_EXPOSED_IF: | |
126 | exp_if = (struct bootrec_exp_if *) bootrec->data; | |
127 | for (i = 0; i < (len * sizeof(*exp_if) / 4); i++) | |
dc73c623 | 128 | if (exp_if[i].if_id == cpu_to_le16(0x1a)) |
eff1a59c MW |
129 | priv->fw_var = le16_to_cpu(exp_if[i].variant); |
130 | break; | |
131 | case BR_CODE_DEPENDENT_IF: | |
132 | break; | |
133 | case BR_CODE_END_OF_BRA: | |
134 | case LEGACY_BR_CODE_END_OF_BRA: | |
135 | end_data = NULL; | |
136 | break; | |
137 | default: | |
138 | break; | |
139 | } | |
140 | bootrec = (struct bootrec *)&bootrec->data[len]; | |
141 | } | |
142 | ||
143 | if (fw_version) | |
144 | printk(KERN_INFO "p54: FW rev %s - Softmac protocol %x.%x\n", | |
145 | fw_version, priv->fw_var >> 8, priv->fw_var & 0xff); | |
146 | ||
147 | if (priv->fw_var >= 0x300) { | |
148 | /* Firmware supports QoS, use it! */ | |
149 | priv->tx_stats.data[0].limit = 3; | |
150 | priv->tx_stats.data[1].limit = 4; | |
151 | priv->tx_stats.data[2].limit = 3; | |
152 | priv->tx_stats.data[3].limit = 1; | |
153 | dev->queues = 4; | |
154 | } | |
155 | } | |
156 | EXPORT_SYMBOL_GPL(p54_parse_firmware); | |
157 | ||
158 | static int p54_convert_rev0_to_rev1(struct ieee80211_hw *dev, | |
159 | struct pda_pa_curve_data *curve_data) | |
160 | { | |
161 | struct p54_common *priv = dev->priv; | |
162 | struct pda_pa_curve_data_sample_rev1 *rev1; | |
163 | struct pda_pa_curve_data_sample_rev0 *rev0; | |
164 | size_t cd_len = sizeof(*curve_data) + | |
165 | (curve_data->points_per_channel*sizeof(*rev1) + 2) * | |
166 | curve_data->channels; | |
167 | unsigned int i, j; | |
168 | void *source, *target; | |
169 | ||
170 | priv->curve_data = kmalloc(cd_len, GFP_KERNEL); | |
171 | if (!priv->curve_data) | |
172 | return -ENOMEM; | |
173 | ||
174 | memcpy(priv->curve_data, curve_data, sizeof(*curve_data)); | |
175 | source = curve_data->data; | |
176 | target = priv->curve_data->data; | |
177 | for (i = 0; i < curve_data->channels; i++) { | |
178 | __le16 *freq = source; | |
179 | source += sizeof(__le16); | |
180 | *((__le16 *)target) = *freq; | |
181 | target += sizeof(__le16); | |
182 | for (j = 0; j < curve_data->points_per_channel; j++) { | |
183 | rev1 = target; | |
184 | rev0 = source; | |
185 | ||
186 | rev1->rf_power = rev0->rf_power; | |
187 | rev1->pa_detector = rev0->pa_detector; | |
188 | rev1->data_64qam = rev0->pcv; | |
189 | /* "invent" the points for the other modulations */ | |
190 | #define SUB(x,y) (u8)((x) - (y)) > (x) ? 0 : (x) - (y) | |
191 | rev1->data_16qam = SUB(rev0->pcv, 12); | |
192 | rev1->data_qpsk = SUB(rev1->data_16qam, 12); | |
193 | rev1->data_bpsk = SUB(rev1->data_qpsk, 12); | |
194 | rev1->data_barker= SUB(rev1->data_bpsk, 14); | |
195 | #undef SUB | |
196 | target += sizeof(*rev1); | |
197 | source += sizeof(*rev0); | |
198 | } | |
199 | } | |
200 | ||
201 | return 0; | |
202 | } | |
203 | ||
204 | int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) | |
205 | { | |
206 | struct p54_common *priv = dev->priv; | |
207 | struct eeprom_pda_wrap *wrap = NULL; | |
208 | struct pda_entry *entry; | |
eff1a59c MW |
209 | unsigned int data_len, entry_len; |
210 | void *tmp; | |
211 | int err; | |
c2f2d3a0 | 212 | u8 *end = (u8 *)eeprom + len; |
eff1a59c MW |
213 | |
214 | wrap = (struct eeprom_pda_wrap *) eeprom; | |
8c28293f | 215 | entry = (void *)wrap->data + le16_to_cpu(wrap->len); |
c2f2d3a0 JB |
216 | |
217 | /* verify that at least the entry length/code fits */ | |
218 | while ((u8 *)entry <= end - sizeof(*entry)) { | |
eff1a59c MW |
219 | entry_len = le16_to_cpu(entry->len); |
220 | data_len = ((entry_len - 1) << 1); | |
c2f2d3a0 JB |
221 | |
222 | /* abort if entry exceeds whole structure */ | |
223 | if ((u8 *)entry + sizeof(*entry) + data_len > end) | |
224 | break; | |
225 | ||
eff1a59c MW |
226 | switch (le16_to_cpu(entry->code)) { |
227 | case PDR_MAC_ADDRESS: | |
228 | SET_IEEE80211_PERM_ADDR(dev, entry->data); | |
229 | break; | |
230 | case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS: | |
231 | if (data_len < 2) { | |
232 | err = -EINVAL; | |
233 | goto err; | |
234 | } | |
235 | ||
236 | if (2 + entry->data[1]*sizeof(*priv->output_limit) > data_len) { | |
237 | err = -EINVAL; | |
238 | goto err; | |
239 | } | |
240 | ||
241 | priv->output_limit = kmalloc(entry->data[1] * | |
242 | sizeof(*priv->output_limit), GFP_KERNEL); | |
243 | ||
244 | if (!priv->output_limit) { | |
245 | err = -ENOMEM; | |
246 | goto err; | |
247 | } | |
248 | ||
249 | memcpy(priv->output_limit, &entry->data[2], | |
250 | entry->data[1]*sizeof(*priv->output_limit)); | |
251 | priv->output_limit_len = entry->data[1]; | |
252 | break; | |
253 | case PDR_PRISM_PA_CAL_CURVE_DATA: | |
254 | if (data_len < sizeof(struct pda_pa_curve_data)) { | |
255 | err = -EINVAL; | |
256 | goto err; | |
257 | } | |
258 | ||
259 | if (((struct pda_pa_curve_data *)entry->data)->cal_method_rev) { | |
260 | priv->curve_data = kmalloc(data_len, GFP_KERNEL); | |
261 | if (!priv->curve_data) { | |
262 | err = -ENOMEM; | |
263 | goto err; | |
264 | } | |
265 | ||
266 | memcpy(priv->curve_data, entry->data, data_len); | |
267 | } else { | |
268 | err = p54_convert_rev0_to_rev1(dev, (struct pda_pa_curve_data *)entry->data); | |
269 | if (err) | |
270 | goto err; | |
271 | } | |
272 | ||
273 | break; | |
274 | case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: | |
275 | priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); | |
276 | if (!priv->iq_autocal) { | |
277 | err = -ENOMEM; | |
278 | goto err; | |
279 | } | |
280 | ||
281 | memcpy(priv->iq_autocal, entry->data, data_len); | |
282 | priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry); | |
283 | break; | |
284 | case PDR_INTERFACE_LIST: | |
285 | tmp = entry->data; | |
286 | while ((u8 *)tmp < entry->data + data_len) { | |
287 | struct bootrec_exp_if *exp_if = tmp; | |
288 | if (le16_to_cpu(exp_if->if_id) == 0xF) | |
289 | priv->rxhw = exp_if->variant & cpu_to_le16(0x07); | |
290 | tmp += sizeof(struct bootrec_exp_if); | |
291 | } | |
292 | break; | |
293 | case PDR_HARDWARE_PLATFORM_COMPONENT_ID: | |
294 | priv->version = *(u8 *)(entry->data + 1); | |
295 | break; | |
296 | case PDR_END: | |
c2f2d3a0 JB |
297 | /* make it overrun */ |
298 | entry_len = len; | |
eff1a59c | 299 | break; |
58e30739 FF |
300 | default: |
301 | printk(KERN_INFO "p54: unknown eeprom code : 0x%x\n", | |
302 | le16_to_cpu(entry->code)); | |
303 | break; | |
eff1a59c MW |
304 | } |
305 | ||
306 | entry = (void *)entry + (entry_len + 1)*2; | |
eff1a59c MW |
307 | } |
308 | ||
309 | if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) { | |
310 | printk(KERN_ERR "p54: not all required entries found in eeprom!\n"); | |
311 | err = -EINVAL; | |
312 | goto err; | |
313 | } | |
314 | ||
315 | return 0; | |
316 | ||
317 | err: | |
318 | if (priv->iq_autocal) { | |
319 | kfree(priv->iq_autocal); | |
320 | priv->iq_autocal = NULL; | |
321 | } | |
322 | ||
323 | if (priv->output_limit) { | |
324 | kfree(priv->output_limit); | |
325 | priv->output_limit = NULL; | |
326 | } | |
327 | ||
328 | if (priv->curve_data) { | |
329 | kfree(priv->curve_data); | |
330 | priv->curve_data = NULL; | |
331 | } | |
332 | ||
333 | printk(KERN_ERR "p54: eeprom parse failed!\n"); | |
334 | return err; | |
335 | } | |
336 | EXPORT_SYMBOL_GPL(p54_parse_eeprom); | |
337 | ||
338 | void p54_fill_eeprom_readback(struct p54_control_hdr *hdr) | |
339 | { | |
340 | struct p54_eeprom_lm86 *eeprom_hdr; | |
341 | ||
342 | hdr->magic1 = cpu_to_le16(0x8000); | |
343 | hdr->len = cpu_to_le16(sizeof(*eeprom_hdr) + 0x2000); | |
344 | hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK); | |
345 | hdr->retry1 = hdr->retry2 = 0; | |
346 | eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data; | |
347 | eeprom_hdr->offset = 0x0; | |
348 | eeprom_hdr->len = cpu_to_le16(0x2000); | |
349 | } | |
350 | EXPORT_SYMBOL_GPL(p54_fill_eeprom_readback); | |
351 | ||
352 | static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb) | |
353 | { | |
354 | struct p54_rx_hdr *hdr = (struct p54_rx_hdr *) skb->data; | |
355 | struct ieee80211_rx_status rx_status = {0}; | |
356 | u16 freq = le16_to_cpu(hdr->freq); | |
357 | ||
358 | rx_status.ssi = hdr->rssi; | |
8318d78a JB |
359 | /* XX correct? */ |
360 | rx_status.rate_idx = hdr->rate & 0xf; | |
eff1a59c | 361 | rx_status.freq = freq; |
8318d78a | 362 | rx_status.band = IEEE80211_BAND_2GHZ; |
eff1a59c MW |
363 | rx_status.antenna = hdr->antenna; |
364 | rx_status.mactime = le64_to_cpu(hdr->timestamp); | |
03bffc13 | 365 | rx_status.flag |= RX_FLAG_TSFT; |
eff1a59c MW |
366 | |
367 | skb_pull(skb, sizeof(*hdr)); | |
368 | skb_trim(skb, le16_to_cpu(hdr->len)); | |
369 | ||
370 | ieee80211_rx_irqsafe(dev, skb, &rx_status); | |
371 | } | |
372 | ||
373 | static void inline p54_wake_free_queues(struct ieee80211_hw *dev) | |
374 | { | |
375 | struct p54_common *priv = dev->priv; | |
376 | int i; | |
377 | ||
378 | /* ieee80211_start_queues is great if all queues are really empty. | |
379 | * But, what if some are full? */ | |
380 | ||
381 | for (i = 0; i < dev->queues; i++) | |
382 | if (priv->tx_stats.data[i].len < priv->tx_stats.data[i].limit) | |
383 | ieee80211_wake_queue(dev, i); | |
384 | } | |
385 | ||
386 | static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) | |
387 | { | |
388 | struct p54_common *priv = dev->priv; | |
389 | struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; | |
390 | struct p54_frame_sent_hdr *payload = (struct p54_frame_sent_hdr *) hdr->data; | |
391 | struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next; | |
392 | u32 addr = le32_to_cpu(hdr->req_id) - 0x70; | |
393 | struct memrecord *range = NULL; | |
394 | u32 freed = 0; | |
395 | u32 last_addr = priv->rx_start; | |
396 | ||
397 | while (entry != (struct sk_buff *)&priv->tx_queue) { | |
398 | range = (struct memrecord *)&entry->cb; | |
399 | if (range->start_addr == addr) { | |
c2976ab0 | 400 | struct ieee80211_tx_status status; |
eff1a59c MW |
401 | struct p54_control_hdr *entry_hdr; |
402 | struct p54_tx_control_allocdata *entry_data; | |
403 | int pad = 0; | |
404 | ||
405 | if (entry->next != (struct sk_buff *)&priv->tx_queue) | |
406 | freed = ((struct memrecord *)&entry->next->cb)->start_addr - last_addr; | |
407 | else | |
408 | freed = priv->rx_end - last_addr; | |
409 | ||
410 | last_addr = range->end_addr; | |
411 | __skb_unlink(entry, &priv->tx_queue); | |
412 | if (!range->control) { | |
413 | kfree_skb(entry); | |
414 | break; | |
415 | } | |
c2976ab0 | 416 | memset(&status, 0, sizeof(status)); |
eff1a59c MW |
417 | memcpy(&status.control, range->control, |
418 | sizeof(status.control)); | |
419 | kfree(range->control); | |
420 | priv->tx_stats.data[status.control.queue].len--; | |
421 | ||
422 | entry_hdr = (struct p54_control_hdr *) entry->data; | |
423 | entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data; | |
424 | if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0) | |
425 | pad = entry_data->align[0]; | |
426 | ||
f59d9782 | 427 | if (!(status.control.flags & IEEE80211_TXCTL_NO_ACK)) { |
eff1a59c MW |
428 | if (!(payload->status & 0x01)) |
429 | status.flags |= IEEE80211_TX_STATUS_ACK; | |
430 | else | |
431 | status.excessive_retries = 1; | |
432 | } | |
433 | status.retry_count = payload->retries - 1; | |
434 | status.ack_signal = le16_to_cpu(payload->ack_rssi); | |
435 | skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); | |
436 | ieee80211_tx_status_irqsafe(dev, entry, &status); | |
437 | break; | |
438 | } else | |
439 | last_addr = range->end_addr; | |
440 | entry = entry->next; | |
441 | } | |
442 | ||
443 | if (freed >= IEEE80211_MAX_RTS_THRESHOLD + 0x170 + | |
444 | sizeof(struct p54_control_hdr)) | |
445 | p54_wake_free_queues(dev); | |
446 | } | |
447 | ||
448 | static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb) | |
449 | { | |
450 | struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data; | |
451 | ||
452 | switch (le16_to_cpu(hdr->type)) { | |
453 | case P54_CONTROL_TYPE_TXDONE: | |
454 | p54_rx_frame_sent(dev, skb); | |
455 | break; | |
456 | case P54_CONTROL_TYPE_BBP: | |
457 | break; | |
458 | default: | |
459 | printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n", | |
460 | wiphy_name(dev->wiphy), le16_to_cpu(hdr->type)); | |
461 | break; | |
462 | } | |
463 | } | |
464 | ||
465 | /* returns zero if skb can be reused */ | |
466 | int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) | |
467 | { | |
468 | u8 type = le16_to_cpu(*((__le16 *)skb->data)) >> 8; | |
469 | switch (type) { | |
470 | case 0x00: | |
471 | case 0x01: | |
472 | p54_rx_data(dev, skb); | |
473 | return -1; | |
474 | case 0x4d: | |
475 | /* TODO: do something better... but then again, I've never seen this happen */ | |
476 | printk(KERN_ERR "%s: Received fault. Probably need to restart hardware now..\n", | |
477 | wiphy_name(dev->wiphy)); | |
478 | break; | |
479 | case 0x80: | |
480 | p54_rx_control(dev, skb); | |
481 | break; | |
482 | default: | |
483 | printk(KERN_ERR "%s: unknown frame RXed (0x%02x)\n", | |
484 | wiphy_name(dev->wiphy), type); | |
485 | break; | |
486 | } | |
487 | return 0; | |
488 | } | |
489 | EXPORT_SYMBOL_GPL(p54_rx); | |
490 | ||
491 | /* | |
492 | * So, the firmware is somewhat stupid and doesn't know what places in its | |
493 | * memory incoming data should go to. By poking around in the firmware, we | |
494 | * can find some unused memory to upload our packets to. However, data that we | |
495 | * want the card to TX needs to stay intact until the card has told us that | |
496 | * it is done with it. This function finds empty places we can upload to and | |
497 | * marks allocated areas as reserved if necessary. p54_rx_frame_sent frees | |
498 | * allocated areas. | |
499 | */ | |
500 | static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb, | |
501 | struct p54_control_hdr *data, u32 len, | |
502 | struct ieee80211_tx_control *control) | |
503 | { | |
504 | struct p54_common *priv = dev->priv; | |
505 | struct sk_buff *entry = priv->tx_queue.next; | |
506 | struct sk_buff *target_skb = NULL; | |
507 | struct memrecord *range; | |
508 | u32 last_addr = priv->rx_start; | |
509 | u32 largest_hole = 0; | |
510 | u32 target_addr = priv->rx_start; | |
511 | unsigned long flags; | |
512 | unsigned int left; | |
513 | len = (len + 0x170 + 3) & ~0x3; /* 0x70 headroom, 0x100 tailroom */ | |
514 | ||
515 | spin_lock_irqsave(&priv->tx_queue.lock, flags); | |
516 | left = skb_queue_len(&priv->tx_queue); | |
517 | while (left--) { | |
518 | u32 hole_size; | |
519 | range = (struct memrecord *)&entry->cb; | |
520 | hole_size = range->start_addr - last_addr; | |
521 | if (!target_skb && hole_size >= len) { | |
522 | target_skb = entry->prev; | |
523 | hole_size -= len; | |
524 | target_addr = last_addr; | |
525 | } | |
526 | largest_hole = max(largest_hole, hole_size); | |
527 | last_addr = range->end_addr; | |
528 | entry = entry->next; | |
529 | } | |
530 | if (!target_skb && priv->rx_end - last_addr >= len) { | |
531 | target_skb = priv->tx_queue.prev; | |
532 | largest_hole = max(largest_hole, priv->rx_end - last_addr - len); | |
533 | if (!skb_queue_empty(&priv->tx_queue)) { | |
534 | range = (struct memrecord *)&target_skb->cb; | |
535 | target_addr = range->end_addr; | |
536 | } | |
537 | } else | |
538 | largest_hole = max(largest_hole, priv->rx_end - last_addr); | |
539 | ||
540 | if (skb) { | |
541 | range = (struct memrecord *)&skb->cb; | |
542 | range->start_addr = target_addr; | |
543 | range->end_addr = target_addr + len; | |
544 | range->control = control; | |
545 | __skb_queue_after(&priv->tx_queue, target_skb, skb); | |
546 | if (largest_hole < IEEE80211_MAX_RTS_THRESHOLD + 0x170 + | |
547 | sizeof(struct p54_control_hdr)) | |
548 | ieee80211_stop_queues(dev); | |
549 | } | |
550 | spin_unlock_irqrestore(&priv->tx_queue.lock, flags); | |
551 | ||
552 | data->req_id = cpu_to_le32(target_addr + 0x70); | |
553 | } | |
554 | ||
555 | static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb, | |
556 | struct ieee80211_tx_control *control) | |
557 | { | |
558 | struct ieee80211_tx_queue_stats_data *current_queue; | |
559 | struct p54_common *priv = dev->priv; | |
560 | struct p54_control_hdr *hdr; | |
561 | struct p54_tx_control_allocdata *txhdr; | |
562 | struct ieee80211_tx_control *control_copy; | |
563 | size_t padding, len; | |
564 | u8 rate; | |
565 | ||
566 | current_queue = &priv->tx_stats.data[control->queue]; | |
567 | if (unlikely(current_queue->len > current_queue->limit)) | |
568 | return NETDEV_TX_BUSY; | |
569 | current_queue->len++; | |
570 | current_queue->count++; | |
571 | if (current_queue->len == current_queue->limit) | |
572 | ieee80211_stop_queue(dev, control->queue); | |
573 | ||
574 | padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3; | |
575 | len = skb->len; | |
576 | ||
577 | control_copy = kmalloc(sizeof(*control), GFP_ATOMIC); | |
578 | if (control_copy) | |
579 | memcpy(control_copy, control, sizeof(*control)); | |
580 | ||
581 | txhdr = (struct p54_tx_control_allocdata *) | |
582 | skb_push(skb, sizeof(*txhdr) + padding); | |
583 | hdr = (struct p54_control_hdr *) skb_push(skb, sizeof(*hdr)); | |
584 | ||
585 | if (padding) | |
586 | hdr->magic1 = cpu_to_le16(0x4010); | |
587 | else | |
588 | hdr->magic1 = cpu_to_le16(0x0010); | |
589 | hdr->len = cpu_to_le16(len); | |
590 | hdr->type = (control->flags & IEEE80211_TXCTL_NO_ACK) ? 0 : cpu_to_le16(1); | |
591 | hdr->retry1 = hdr->retry2 = control->retry_limit; | |
592 | p54_assign_address(dev, skb, hdr, skb->len, control_copy); | |
593 | ||
594 | memset(txhdr->wep_key, 0x0, 16); | |
595 | txhdr->padding = 0; | |
596 | txhdr->padding2 = 0; | |
597 | ||
598 | /* TODO: add support for alternate retry TX rates */ | |
8318d78a JB |
599 | rate = control->tx_rate->hw_value; |
600 | if (control->flags & IEEE80211_TXCTL_SHORT_PREAMBLE) | |
601 | rate |= 0x10; | |
eff1a59c MW |
602 | if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) |
603 | rate |= 0x40; | |
604 | else if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) | |
605 | rate |= 0x20; | |
606 | memset(txhdr->rateset, rate, 8); | |
607 | txhdr->wep_key_present = 0; | |
608 | txhdr->wep_key_len = 0; | |
609 | txhdr->frame_type = cpu_to_le32(control->queue + 4); | |
610 | txhdr->magic4 = 0; | |
611 | txhdr->antenna = (control->antenna_sel_tx == 0) ? | |
612 | 2 : control->antenna_sel_tx - 1; | |
613 | txhdr->output_power = 0x7f; // HW Maximum | |
614 | txhdr->magic5 = (control->flags & IEEE80211_TXCTL_NO_ACK) ? | |
615 | 0 : ((rate > 0x3) ? cpu_to_le32(0x33) : cpu_to_le32(0x23)); | |
616 | if (padding) | |
617 | txhdr->align[0] = padding; | |
618 | ||
619 | priv->tx(dev, hdr, skb->len, 0); | |
620 | return 0; | |
621 | } | |
622 | ||
623 | static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, | |
624 | const u8 *dst, const u8 *src, u8 antenna, | |
625 | u32 magic3, u32 magic8, u32 magic9) | |
626 | { | |
627 | struct p54_common *priv = dev->priv; | |
628 | struct p54_control_hdr *hdr; | |
629 | struct p54_tx_control_filter *filter; | |
630 | ||
631 | hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) + | |
ba8007ce | 632 | priv->tx_hdr_len, GFP_ATOMIC); |
eff1a59c MW |
633 | if (!hdr) |
634 | return -ENOMEM; | |
635 | ||
636 | hdr = (void *)hdr + priv->tx_hdr_len; | |
637 | ||
638 | filter = (struct p54_tx_control_filter *) hdr->data; | |
639 | hdr->magic1 = cpu_to_le16(0x8001); | |
640 | hdr->len = cpu_to_le16(sizeof(*filter)); | |
641 | p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*filter), NULL); | |
642 | hdr->type = cpu_to_le16(P54_CONTROL_TYPE_FILTER_SET); | |
643 | ||
644 | filter->filter_type = cpu_to_le16(filter_type); | |
645 | memcpy(filter->dst, dst, ETH_ALEN); | |
646 | if (!src) | |
647 | memset(filter->src, ~0, ETH_ALEN); | |
648 | else | |
649 | memcpy(filter->src, src, ETH_ALEN); | |
650 | filter->antenna = antenna; | |
651 | filter->magic3 = cpu_to_le32(magic3); | |
652 | filter->rx_addr = cpu_to_le32(priv->rx_end); | |
653 | filter->max_rx = cpu_to_le16(0x0620); /* FIXME: for usb ver 1.. maybe */ | |
654 | filter->rxhw = priv->rxhw; | |
655 | filter->magic8 = cpu_to_le16(magic8); | |
656 | filter->magic9 = cpu_to_le16(magic9); | |
657 | ||
658 | priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*filter), 1); | |
659 | return 0; | |
660 | } | |
661 | ||
662 | static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq) | |
663 | { | |
664 | struct p54_common *priv = dev->priv; | |
665 | struct p54_control_hdr *hdr; | |
666 | struct p54_tx_control_channel *chan; | |
667 | unsigned int i; | |
668 | size_t payload_len = sizeof(*chan) + sizeof(u32)*2 + | |
669 | sizeof(*chan->curve_data) * | |
670 | priv->curve_data->points_per_channel; | |
671 | void *entry; | |
672 | ||
673 | hdr = kzalloc(sizeof(*hdr) + payload_len + | |
674 | priv->tx_hdr_len, GFP_KERNEL); | |
675 | if (!hdr) | |
676 | return -ENOMEM; | |
677 | ||
678 | hdr = (void *)hdr + priv->tx_hdr_len; | |
679 | ||
680 | chan = (struct p54_tx_control_channel *) hdr->data; | |
681 | ||
682 | hdr->magic1 = cpu_to_le16(0x8001); | |
683 | hdr->len = cpu_to_le16(sizeof(*chan)); | |
684 | hdr->type = cpu_to_le16(P54_CONTROL_TYPE_CHANNEL_CHANGE); | |
685 | p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + payload_len, NULL); | |
686 | ||
687 | chan->magic1 = cpu_to_le16(0x1); | |
688 | chan->magic2 = cpu_to_le16(0x0); | |
689 | ||
690 | for (i = 0; i < priv->iq_autocal_len; i++) { | |
691 | if (priv->iq_autocal[i].freq != freq) | |
692 | continue; | |
693 | ||
694 | memcpy(&chan->iq_autocal, &priv->iq_autocal[i], | |
695 | sizeof(*priv->iq_autocal)); | |
696 | break; | |
697 | } | |
698 | if (i == priv->iq_autocal_len) | |
699 | goto err; | |
700 | ||
701 | for (i = 0; i < priv->output_limit_len; i++) { | |
702 | if (priv->output_limit[i].freq != freq) | |
703 | continue; | |
704 | ||
705 | chan->val_barker = 0x38; | |
706 | chan->val_bpsk = priv->output_limit[i].val_bpsk; | |
707 | chan->val_qpsk = priv->output_limit[i].val_qpsk; | |
708 | chan->val_16qam = priv->output_limit[i].val_16qam; | |
709 | chan->val_64qam = priv->output_limit[i].val_64qam; | |
710 | break; | |
711 | } | |
712 | if (i == priv->output_limit_len) | |
713 | goto err; | |
714 | ||
715 | chan->pa_points_per_curve = priv->curve_data->points_per_channel; | |
716 | ||
717 | entry = priv->curve_data->data; | |
718 | for (i = 0; i < priv->curve_data->channels; i++) { | |
719 | if (*((__le16 *)entry) != freq) { | |
720 | entry += sizeof(__le16); | |
721 | entry += sizeof(struct pda_pa_curve_data_sample_rev1) * | |
722 | chan->pa_points_per_curve; | |
723 | continue; | |
724 | } | |
725 | ||
726 | entry += sizeof(__le16); | |
727 | memcpy(chan->curve_data, entry, sizeof(*chan->curve_data) * | |
728 | chan->pa_points_per_curve); | |
729 | break; | |
730 | } | |
731 | ||
732 | memcpy(hdr->data + payload_len - 4, &chan->val_bpsk, 4); | |
733 | ||
734 | priv->tx(dev, hdr, sizeof(*hdr) + payload_len, 1); | |
735 | return 0; | |
736 | ||
737 | err: | |
738 | printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy)); | |
739 | kfree(hdr); | |
740 | return -EINVAL; | |
741 | } | |
742 | ||
743 | static int p54_set_leds(struct ieee80211_hw *dev, int mode, int link, int act) | |
744 | { | |
745 | struct p54_common *priv = dev->priv; | |
746 | struct p54_control_hdr *hdr; | |
747 | struct p54_tx_control_led *led; | |
748 | ||
749 | hdr = kzalloc(sizeof(*hdr) + sizeof(*led) + | |
750 | priv->tx_hdr_len, GFP_KERNEL); | |
751 | if (!hdr) | |
752 | return -ENOMEM; | |
753 | ||
754 | hdr = (void *)hdr + priv->tx_hdr_len; | |
755 | hdr->magic1 = cpu_to_le16(0x8001); | |
756 | hdr->len = cpu_to_le16(sizeof(*led)); | |
757 | hdr->type = cpu_to_le16(P54_CONTROL_TYPE_LED); | |
758 | p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*led), NULL); | |
759 | ||
760 | led = (struct p54_tx_control_led *) hdr->data; | |
761 | led->mode = cpu_to_le16(mode); | |
762 | led->led_permanent = cpu_to_le16(link); | |
763 | led->led_temporary = cpu_to_le16(act); | |
764 | led->duration = cpu_to_le16(1000); | |
765 | ||
766 | priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*led), 1); | |
767 | ||
768 | return 0; | |
769 | } | |
770 | ||
3330d7be | 771 | #define P54_SET_QUEUE(queue, ai_fs, cw_min, cw_max, _txop) \ |
eff1a59c MW |
772 | do { \ |
773 | queue.aifs = cpu_to_le16(ai_fs); \ | |
774 | queue.cwmin = cpu_to_le16(cw_min); \ | |
775 | queue.cwmax = cpu_to_le16(cw_max); \ | |
3330d7be | 776 | queue.txop = cpu_to_le16(_txop); \ |
eff1a59c MW |
777 | } while(0) |
778 | ||
779 | static void p54_init_vdcf(struct ieee80211_hw *dev) | |
780 | { | |
781 | struct p54_common *priv = dev->priv; | |
782 | struct p54_control_hdr *hdr; | |
783 | struct p54_tx_control_vdcf *vdcf; | |
784 | ||
785 | /* all USB V1 adapters need a extra headroom */ | |
786 | hdr = (void *)priv->cached_vdcf + priv->tx_hdr_len; | |
787 | hdr->magic1 = cpu_to_le16(0x8001); | |
788 | hdr->len = cpu_to_le16(sizeof(*vdcf)); | |
789 | hdr->type = cpu_to_le16(P54_CONTROL_TYPE_DCFINIT); | |
790 | hdr->req_id = cpu_to_le32(priv->rx_start); | |
791 | ||
792 | vdcf = (struct p54_tx_control_vdcf *) hdr->data; | |
793 | ||
3330d7be JB |
794 | P54_SET_QUEUE(vdcf->queue[0], 0x0002, 0x0003, 0x0007, 47); |
795 | P54_SET_QUEUE(vdcf->queue[1], 0x0002, 0x0007, 0x000f, 94); | |
5200e8cd | 796 | P54_SET_QUEUE(vdcf->queue[2], 0x0003, 0x000f, 0x03ff, 0); |
3330d7be | 797 | P54_SET_QUEUE(vdcf->queue[3], 0x0007, 0x000f, 0x03ff, 0); |
eff1a59c MW |
798 | } |
799 | ||
800 | static void p54_set_vdcf(struct ieee80211_hw *dev) | |
801 | { | |
802 | struct p54_common *priv = dev->priv; | |
803 | struct p54_control_hdr *hdr; | |
804 | struct p54_tx_control_vdcf *vdcf; | |
805 | ||
806 | hdr = (void *)priv->cached_vdcf + priv->tx_hdr_len; | |
807 | ||
808 | p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*vdcf), NULL); | |
809 | ||
810 | vdcf = (struct p54_tx_control_vdcf *) hdr->data; | |
811 | ||
812 | if (dev->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) { | |
813 | vdcf->slottime = 9; | |
814 | vdcf->magic1 = 0x00; | |
815 | vdcf->magic2 = 0x10; | |
816 | } else { | |
817 | vdcf->slottime = 20; | |
818 | vdcf->magic1 = 0x0a; | |
819 | vdcf->magic2 = 0x06; | |
820 | } | |
821 | ||
822 | /* (see prism54/isl_oid.h for further details) */ | |
823 | vdcf->frameburst = cpu_to_le16(0); | |
824 | ||
825 | priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*vdcf), 0); | |
826 | } | |
827 | ||
4150c572 JB |
828 | static int p54_start(struct ieee80211_hw *dev) |
829 | { | |
830 | struct p54_common *priv = dev->priv; | |
831 | int err; | |
832 | ||
833 | err = priv->open(dev); | |
834 | if (!err) | |
835 | priv->mode = IEEE80211_IF_TYPE_MNTR; | |
836 | ||
837 | return err; | |
838 | } | |
839 | ||
840 | static void p54_stop(struct ieee80211_hw *dev) | |
841 | { | |
842 | struct p54_common *priv = dev->priv; | |
843 | struct sk_buff *skb; | |
844 | while ((skb = skb_dequeue(&priv->tx_queue))) { | |
845 | struct memrecord *range = (struct memrecord *)&skb->cb; | |
846 | if (range->control) | |
847 | kfree(range->control); | |
848 | kfree_skb(skb); | |
849 | } | |
850 | priv->stop(dev); | |
a2897552 | 851 | priv->mode = IEEE80211_IF_TYPE_INVALID; |
4150c572 JB |
852 | } |
853 | ||
eff1a59c MW |
854 | static int p54_add_interface(struct ieee80211_hw *dev, |
855 | struct ieee80211_if_init_conf *conf) | |
856 | { | |
857 | struct p54_common *priv = dev->priv; | |
eff1a59c | 858 | |
4150c572 JB |
859 | if (priv->mode != IEEE80211_IF_TYPE_MNTR) |
860 | return -EOPNOTSUPP; | |
eff1a59c MW |
861 | |
862 | switch (conf->type) { | |
863 | case IEEE80211_IF_TYPE_STA: | |
864 | priv->mode = conf->type; | |
865 | break; | |
866 | default: | |
867 | return -EOPNOTSUPP; | |
868 | } | |
869 | ||
4150c572 | 870 | memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); |
eff1a59c MW |
871 | |
872 | p54_set_filter(dev, 0, priv->mac_addr, NULL, 0, 1, 0, 0xF642); | |
873 | p54_set_filter(dev, 0, priv->mac_addr, NULL, 1, 0, 0, 0xF642); | |
eff1a59c MW |
874 | |
875 | switch (conf->type) { | |
876 | case IEEE80211_IF_TYPE_STA: | |
877 | p54_set_filter(dev, 1, priv->mac_addr, NULL, 0, 0x15F, 0x1F4, 0); | |
878 | break; | |
4150c572 JB |
879 | default: |
880 | BUG(); /* impossible */ | |
881 | break; | |
eff1a59c MW |
882 | } |
883 | ||
884 | p54_set_leds(dev, 1, 0, 0); | |
885 | ||
886 | return 0; | |
887 | } | |
888 | ||
889 | static void p54_remove_interface(struct ieee80211_hw *dev, | |
890 | struct ieee80211_if_init_conf *conf) | |
891 | { | |
892 | struct p54_common *priv = dev->priv; | |
4150c572 JB |
893 | priv->mode = IEEE80211_IF_TYPE_MNTR; |
894 | memset(priv->mac_addr, 0, ETH_ALEN); | |
895 | p54_set_filter(dev, 0, priv->mac_addr, NULL, 2, 0, 0, 0); | |
eff1a59c MW |
896 | } |
897 | ||
898 | static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) | |
899 | { | |
900 | int ret; | |
901 | ||
8318d78a | 902 | ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq)); |
eff1a59c MW |
903 | p54_set_vdcf(dev); |
904 | return ret; | |
905 | } | |
906 | ||
32bfd35d JB |
907 | static int p54_config_interface(struct ieee80211_hw *dev, |
908 | struct ieee80211_vif *vif, | |
eff1a59c MW |
909 | struct ieee80211_if_conf *conf) |
910 | { | |
911 | struct p54_common *priv = dev->priv; | |
912 | ||
913 | p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642); | |
914 | p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0); | |
915 | p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0); | |
4150c572 | 916 | memcpy(priv->bssid, conf->bssid, ETH_ALEN); |
eff1a59c MW |
917 | return 0; |
918 | } | |
919 | ||
4150c572 JB |
920 | static void p54_configure_filter(struct ieee80211_hw *dev, |
921 | unsigned int changed_flags, | |
922 | unsigned int *total_flags, | |
923 | int mc_count, struct dev_mc_list *mclist) | |
924 | { | |
925 | struct p54_common *priv = dev->priv; | |
926 | ||
927 | *total_flags &= FIF_BCN_PRBRESP_PROMISC; | |
928 | ||
929 | if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { | |
930 | if (*total_flags & FIF_BCN_PRBRESP_PROMISC) | |
931 | p54_set_filter(dev, 0, priv->mac_addr, | |
932 | NULL, 2, 0, 0, 0); | |
933 | else | |
934 | p54_set_filter(dev, 0, priv->mac_addr, | |
935 | priv->bssid, 2, 0, 0, 0); | |
936 | } | |
937 | } | |
938 | ||
eff1a59c MW |
939 | static int p54_conf_tx(struct ieee80211_hw *dev, int queue, |
940 | const struct ieee80211_tx_queue_params *params) | |
941 | { | |
942 | struct p54_common *priv = dev->priv; | |
943 | struct p54_tx_control_vdcf *vdcf; | |
944 | ||
945 | vdcf = (struct p54_tx_control_vdcf *)(((struct p54_control_hdr *) | |
946 | ((void *)priv->cached_vdcf + priv->tx_hdr_len))->data); | |
947 | ||
948 | if ((params) && !((queue < 0) || (queue > 4))) { | |
949 | P54_SET_QUEUE(vdcf->queue[queue], params->aifs, | |
3330d7be | 950 | params->cw_min, params->cw_max, params->txop); |
eff1a59c MW |
951 | } else |
952 | return -EINVAL; | |
953 | ||
954 | p54_set_vdcf(dev); | |
955 | ||
956 | return 0; | |
957 | } | |
958 | ||
959 | static int p54_get_stats(struct ieee80211_hw *dev, | |
960 | struct ieee80211_low_level_stats *stats) | |
961 | { | |
962 | /* TODO */ | |
963 | return 0; | |
964 | } | |
965 | ||
966 | static int p54_get_tx_stats(struct ieee80211_hw *dev, | |
967 | struct ieee80211_tx_queue_stats *stats) | |
968 | { | |
969 | struct p54_common *priv = dev->priv; | |
970 | unsigned int i; | |
971 | ||
972 | for (i = 0; i < dev->queues; i++) | |
973 | memcpy(&stats->data[i], &priv->tx_stats.data[i], | |
974 | sizeof(stats->data[i])); | |
975 | ||
976 | return 0; | |
977 | } | |
978 | ||
979 | static const struct ieee80211_ops p54_ops = { | |
980 | .tx = p54_tx, | |
4150c572 JB |
981 | .start = p54_start, |
982 | .stop = p54_stop, | |
eff1a59c MW |
983 | .add_interface = p54_add_interface, |
984 | .remove_interface = p54_remove_interface, | |
985 | .config = p54_config, | |
986 | .config_interface = p54_config_interface, | |
4150c572 | 987 | .configure_filter = p54_configure_filter, |
eff1a59c MW |
988 | .conf_tx = p54_conf_tx, |
989 | .get_stats = p54_get_stats, | |
990 | .get_tx_stats = p54_get_tx_stats | |
991 | }; | |
992 | ||
993 | struct ieee80211_hw *p54_init_common(size_t priv_data_len) | |
994 | { | |
995 | struct ieee80211_hw *dev; | |
996 | struct p54_common *priv; | |
eff1a59c MW |
997 | |
998 | dev = ieee80211_alloc_hw(priv_data_len, &p54_ops); | |
999 | if (!dev) | |
1000 | return NULL; | |
1001 | ||
1002 | priv = dev->priv; | |
a2897552 | 1003 | priv->mode = IEEE80211_IF_TYPE_INVALID; |
eff1a59c | 1004 | skb_queue_head_init(&priv->tx_queue); |
8318d78a | 1005 | dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz; |
eff1a59c MW |
1006 | dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */ |
1007 | IEEE80211_HW_RX_INCLUDES_FCS; | |
1008 | dev->channel_change_time = 1000; /* TODO: find actual value */ | |
1009 | dev->max_rssi = 127; | |
1010 | ||
1011 | priv->tx_stats.data[0].limit = 5; | |
1012 | dev->queues = 1; | |
1013 | ||
1014 | dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 + | |
1015 | sizeof(struct p54_tx_control_allocdata); | |
1016 | ||
1017 | priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf) + | |
1018 | priv->tx_hdr_len + sizeof(struct p54_control_hdr), GFP_KERNEL); | |
1019 | ||
1020 | if (!priv->cached_vdcf) { | |
1021 | ieee80211_free_hw(dev); | |
1022 | return NULL; | |
1023 | } | |
1024 | ||
1025 | p54_init_vdcf(dev); | |
1026 | ||
eff1a59c MW |
1027 | return dev; |
1028 | } | |
1029 | EXPORT_SYMBOL_GPL(p54_init_common); | |
1030 | ||
1031 | void p54_free_common(struct ieee80211_hw *dev) | |
1032 | { | |
1033 | struct p54_common *priv = dev->priv; | |
1034 | kfree(priv->iq_autocal); | |
1035 | kfree(priv->output_limit); | |
1036 | kfree(priv->curve_data); | |
1037 | kfree(priv->cached_vdcf); | |
1038 | } | |
1039 | EXPORT_SYMBOL_GPL(p54_free_common); | |
1040 | ||
1041 | static int __init p54_init(void) | |
1042 | { | |
1043 | return 0; | |
1044 | } | |
1045 | ||
1046 | static void __exit p54_exit(void) | |
1047 | { | |
1048 | } | |
1049 | ||
1050 | module_init(p54_init); | |
1051 | module_exit(p54_exit); |