]> Git Repo - linux.git/blame - include/acpi/actbl.h
Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input
[linux.git] / include / acpi / actbl.h
CommitLineData
1da177e4
LT
1/******************************************************************************
2 *
3 * Name: actbl.h - Table data structures defined in ACPI specification
4 *
5 *****************************************************************************/
6
7/*
8 * Copyright (C) 2000 - 2005, R. Byron Moore
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44#ifndef __ACTBL_H__
45#define __ACTBL_H__
46
47
48/*
49 * Values for description table header signatures
50 */
51#define RSDP_NAME "RSDP"
52#define RSDP_SIG "RSD PTR " /* RSDT Pointer signature */
53#define APIC_SIG "APIC" /* Multiple APIC Description Table */
54#define DSDT_SIG "DSDT" /* Differentiated System Description Table */
55#define FADT_SIG "FACP" /* Fixed ACPI Description Table */
56#define FACS_SIG "FACS" /* Firmware ACPI Control Structure */
57#define PSDT_SIG "PSDT" /* Persistent System Description Table */
58#define RSDT_SIG "RSDT" /* Root System Description Table */
59#define XSDT_SIG "XSDT" /* Extended System Description Table */
60#define SSDT_SIG "SSDT" /* Secondary System Description Table */
61#define SBST_SIG "SBST" /* Smart Battery Specification Table */
62#define SPIC_SIG "SPIC" /* IOSAPIC table */
63#define BOOT_SIG "BOOT" /* Boot table */
64
65
66#define GL_OWNED 0x02 /* Ownership of global lock is bit 1 */
67
68
69/*
70 * Common table types. The base code can remain
71 * constant if the underlying tables are changed
72 */
73#define RSDT_DESCRIPTOR struct rsdt_descriptor_rev2
74#define XSDT_DESCRIPTOR struct xsdt_descriptor_rev2
75#define FACS_DESCRIPTOR struct facs_descriptor_rev2
76#define FADT_DESCRIPTOR struct fadt_descriptor_rev2
77
78
79#pragma pack(1)
80
81/*
82 * ACPI Version-independent tables
83 *
84 * NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.)
85 * are in separate files.
86 */
87struct rsdp_descriptor /* Root System Descriptor Pointer */
88{
89 char signature [8]; /* ACPI signature, contains "RSD PTR " */
90 u8 checksum; /* To make sum of struct == 0 */
91 char oem_id [6]; /* OEM identification */
92 u8 revision; /* Must be 0 for 1.0, 2 for 2.0 */
93 u32 rsdt_physical_address; /* 32-bit physical address of RSDT */
94 u32 length; /* XSDT Length in bytes including hdr */
95 u64 xsdt_physical_address; /* 64-bit physical address of XSDT */
96 u8 extended_checksum; /* Checksum of entire table */
97 char reserved [3]; /* Reserved field must be 0 */
98};
99
100
101struct acpi_common_facs /* Common FACS for internal use */
102{
103 u32 *global_lock;
104 u64 *firmware_waking_vector;
105 u8 vector_width;
106};
107
108
109#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \
110 char signature [4]; /* ACPI signature (4 ASCII characters) */\
111 u32 length; /* Length of table, in bytes, including header */\
112 u8 revision; /* ACPI Specification minor version # */\
113 u8 checksum; /* To make sum of entire table == 0 */\
114 char oem_id [6]; /* OEM identification */\
115 char oem_table_id [8]; /* OEM table identification */\
116 u32 oem_revision; /* OEM revision number */\
117 char asl_compiler_id [4]; /* ASL compiler vendor ID */\
118 u32 asl_compiler_revision; /* ASL compiler revision number */
119
120
121struct acpi_table_header /* ACPI common table header */
122{
123 ACPI_TABLE_HEADER_DEF
124};
125
126
127/*
128 * MADT values and structures
129 */
130
131/* Values for MADT PCATCompat */
132
133#define DUAL_PIC 0
134#define MULTIPLE_APIC 1
135
1da177e4
LT
136/* Master MADT */
137
138struct multiple_apic_table
139{
140 ACPI_TABLE_HEADER_DEF /* ACPI common table header */
141 u32 local_apic_address; /* Physical address of local APIC */
142 u32 PCATcompat : 1; /* A one indicates system also has dual 8259s */
143 u32 reserved1 : 31;
144};
145
1da177e4
LT
146/* Values for Type in APIC_HEADER_DEF */
147
148#define APIC_PROCESSOR 0
149#define APIC_IO 1
150#define APIC_XRUPT_OVERRIDE 2
151#define APIC_NMI 3
152#define APIC_LOCAL_NMI 4
153#define APIC_ADDRESS_OVERRIDE 5
154#define APIC_IO_SAPIC 6
155#define APIC_LOCAL_SAPIC 7
156#define APIC_XRUPT_SOURCE 8
157#define APIC_RESERVED 9 /* 9 and greater are reserved */
158
159/*
160 * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
161 */
162#define APIC_HEADER_DEF /* Common APIC sub-structure header */\
163 u8 type; \
164 u8 length;
165
166struct apic_header
167{
168 APIC_HEADER_DEF
169};
170
171/* Values for MPS INTI flags */
172
173#define POLARITY_CONFORMS 0
174#define POLARITY_ACTIVE_HIGH 1
175#define POLARITY_RESERVED 2
176#define POLARITY_ACTIVE_LOW 3
177
178#define TRIGGER_CONFORMS 0
179#define TRIGGER_EDGE 1
180#define TRIGGER_RESERVED 2
181#define TRIGGER_LEVEL 3
182
183/* Common flag definitions */
184
185#define MPS_INTI_FLAGS \
186 u16 polarity : 2; /* Polarity of APIC I/O input signals */\
187 u16 trigger_mode : 2; /* Trigger mode of APIC input signals */\
188 u16 reserved1 : 12; /* Reserved, must be zero */
189
190#define LOCAL_APIC_FLAGS \
191 u32 processor_enabled: 1; /* Processor is usable if set */\
192 u32 reserved2 : 31; /* Reserved, must be zero */
193
194/* Sub-structures for MADT */
195
196struct madt_processor_apic
197{
198 APIC_HEADER_DEF
199 u8 processor_id; /* ACPI processor id */
200 u8 local_apic_id; /* Processor's local APIC id */
201 LOCAL_APIC_FLAGS
202};
203
204struct madt_io_apic
205{
206 APIC_HEADER_DEF
207 u8 io_apic_id; /* I/O APIC ID */
208 u8 reserved; /* Reserved - must be zero */
209 u32 address; /* APIC physical address */
210 u32 interrupt; /* Global system interrupt where INTI
211 * lines start */
212};
213
214struct madt_interrupt_override
215{
216 APIC_HEADER_DEF
217 u8 bus; /* 0 - ISA */
218 u8 source; /* Interrupt source (IRQ) */
219 u32 interrupt; /* Global system interrupt */
220 MPS_INTI_FLAGS
221};
222
223struct madt_nmi_source
224{
225 APIC_HEADER_DEF
226 MPS_INTI_FLAGS
227 u32 interrupt; /* Global system interrupt */
228};
229
230struct madt_local_apic_nmi
231{
232 APIC_HEADER_DEF
233 u8 processor_id; /* ACPI processor id */
234 MPS_INTI_FLAGS
235 u8 lint; /* LINTn to which NMI is connected */
236};
237
238struct madt_address_override
239{
240 APIC_HEADER_DEF
241 u16 reserved; /* Reserved - must be zero */
242 u64 address; /* APIC physical address */
243};
244
245struct madt_io_sapic
246{
247 APIC_HEADER_DEF
248 u8 io_sapic_id; /* I/O SAPIC ID */
249 u8 reserved; /* Reserved - must be zero */
250 u32 interrupt_base; /* Glocal interrupt for SAPIC start */
251 u64 address; /* SAPIC physical address */
252};
253
254struct madt_local_sapic
255{
256 APIC_HEADER_DEF
257 u8 processor_id; /* ACPI processor id */
258 u8 local_sapic_id; /* SAPIC ID */
259 u8 local_sapic_eid; /* SAPIC EID */
260 u8 reserved [3]; /* Reserved - must be zero */
261 LOCAL_APIC_FLAGS
262 u32 processor_uID; /* Numeric UID - ACPI 3.0 */
263 char processor_uIDstring[1]; /* String UID - ACPI 3.0 */
264};
265
266struct madt_interrupt_source
267{
268 APIC_HEADER_DEF
269 MPS_INTI_FLAGS
270 u8 interrupt_type; /* 1=PMI, 2=INIT, 3=corrected */
271 u8 processor_id; /* Processor ID */
272 u8 processor_eid; /* Processor EID */
273 u8 io_sapic_vector; /* Vector value for PMI interrupts */
274 u32 interrupt; /* Global system interrupt */
275 u32 flags; /* Interrupt Source Flags */
276};
277
278
279/*
280 * Smart Battery
281 */
282struct smart_battery_table
283{
284 ACPI_TABLE_HEADER_DEF
285 u32 warning_level;
286 u32 low_level;
287 u32 critical_level;
288};
289
290
291#pragma pack()
292
293
294/*
295 * ACPI Table information. We save the table address, length,
296 * and type of memory allocation (mapped or allocated) for each
297 * table for 1) when we exit, and 2) if a new table is installed
298 */
299#define ACPI_MEM_NOT_ALLOCATED 0
300#define ACPI_MEM_ALLOCATED 1
301#define ACPI_MEM_MAPPED 2
302
303/* Definitions for the Flags bitfield member of struct acpi_table_support */
304
305#define ACPI_TABLE_SINGLE 0x00
306#define ACPI_TABLE_MULTIPLE 0x01
307#define ACPI_TABLE_EXECUTABLE 0x02
308
309#define ACPI_TABLE_ROOT 0x00
310#define ACPI_TABLE_PRIMARY 0x10
311#define ACPI_TABLE_SECONDARY 0x20
312#define ACPI_TABLE_ALL 0x30
313#define ACPI_TABLE_TYPE_MASK 0x30
314
315/* Data about each known table type */
316
317struct acpi_table_support
318{
319 char *name;
320 char *signature;
321 void **global_ptr;
322 u8 sig_length;
323 u8 flags;
324};
325
326
327/*
328 * Get the ACPI version-specific tables
329 */
330#include "actbl1.h" /* Acpi 1.0 table definitions */
331#include "actbl2.h" /* Acpi 2.0 table definitions */
332
333extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1,
334 * needed for certain workarounds */
335
336#pragma pack(1)
337/*
338 * High performance timer
339 */
340struct hpet_table
341{
342 ACPI_TABLE_HEADER_DEF
343 u32 hardware_id;
344 struct acpi_generic_address base_address;
345 u8 hpet_number;
346 u16 clock_tick;
347 u8 attributes;
348};
349
350#pragma pack()
351
352#endif /* __ACTBL_H__ */
This page took 0.089414 seconds and 4 git commands to generate.