[linux.git] / drivers / hwmon / k8temp.c

/*
 * k8temp.c - Linux kernel module for hardware monitoring
 *
 * Copyright (C) 2006 Rudolf Marek <[email protected]>
 *
 * Inspired from the w83785 and amd756 drivers.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 * 02110-1301 USA.
 */

#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/pci.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/processor.h>

#define TEMP_FROM_REG(val)	(((((val) >> 16) & 0xff) - 49) * 1000)
#define REG_TEMP	0xe4
#define SEL_PLACE	0x40
#define SEL_CORE	0x04

struct k8temp_data {
	struct device *hwmon_dev;
	struct mutex update_lock;
	const char *name;
	char valid;		/* zero until following fields are valid */
	unsigned long last_updated;	/* in jiffies */

	/* registers values */
	u8 sensorsp;		/* sensor presence bits - SEL_CORE & SEL_PLACE */
	u32 temp[2][2];		/* core, place */
	u8 swap_core_select;    /* meaning of SEL_CORE is inverted */
	u32 temp_offset;
};

static struct k8temp_data *k8temp_update_device(struct device *dev)
{
	struct k8temp_data *data = dev_get_drvdata(dev);
	struct pci_dev *pdev = to_pci_dev(dev);
	u8 tmp;

	mutex_lock(&data->update_lock);

	if (!data->valid
	    || time_after(jiffies, data->last_updated + HZ)) {
		pci_read_config_byte(pdev, REG_TEMP, &tmp);
		tmp &= ~(SEL_PLACE | SEL_CORE);		/* Select sensor 0, core0 */
		pci_write_config_byte(pdev, REG_TEMP, tmp);
		pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]);

		if (data->sensorsp & SEL_PLACE) {
			tmp |= SEL_PLACE;	/* Select sensor 1, core0 */
			pci_write_config_byte(pdev, REG_TEMP, tmp);
			pci_read_config_dword(pdev, REG_TEMP,
					      &data->temp[0][1]);
		}

		if (data->sensorsp & SEL_CORE) {
			tmp &= ~SEL_PLACE;	/* Select sensor 0, core1 */
			tmp |= SEL_CORE;
			pci_write_config_byte(pdev, REG_TEMP, tmp);
			pci_read_config_dword(pdev, REG_TEMP,
					      &data->temp[1][0]);

			if (data->sensorsp & SEL_PLACE) {
				tmp |= SEL_PLACE;	/* Select sensor 1, core1 */
				pci_write_config_byte(pdev, REG_TEMP, tmp);
				pci_read_config_dword(pdev, REG_TEMP,
						      &data->temp[1][1]);
			}
		}

		data->last_updated = jiffies;
		data->valid = 1;
	}

	mutex_unlock(&data->update_lock);
	return data;
}

/*
 * Sysfs stuff
 */

static ssize_t show_name(struct device *dev, struct device_attribute
			 *devattr, char *buf)
{
	struct k8temp_data *data = dev_get_drvdata(dev);

	return sprintf(buf, "%s\n", data->name);
}


static ssize_t show_temp(struct device *dev,
			 struct device_attribute *devattr, char *buf)
{
	struct sensor_device_attribute_2 *attr =
	    to_sensor_dev_attr_2(devattr);
	int core = attr->nr;
	int place = attr->index;
	int temp;
	struct k8temp_data *data = k8temp_update_device(dev);

	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
		core = core ? 0 : 1;

	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;

	return sprintf(buf, "%d\n", temp);
}

/* core, place */

static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0);
static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1);
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);

static const struct pci_device_id k8temp_ids[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
	{ 0 },
};

MODULE_DEVICE_TABLE(pci, k8temp_ids);

static int __devinit k8temp_probe(struct pci_dev *pdev,
				  const struct pci_device_id *id)
{
	int err;
	u8 scfg;
	u32 temp;
	u8 model, stepping;
	struct k8temp_data *data;

	if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
		err = -ENOMEM;
		goto exit;
	}

	model = boot_cpu_data.x86_model;
	stepping = boot_cpu_data.x86_mask;

	switch (boot_cpu_data.x86) {
	case 0xf:
		/* feature available since SH-C0, exclude older revisions */
		if (((model == 4) && (stepping == 0)) ||
		    ((model == 5) && (stepping <= 1))) {
			err = -ENODEV;
			goto exit_free;
		}

		/*
		 * AMD NPT family 0fh, i.e. RevF and RevG:
		 * meaning of SEL_CORE bit is inverted
		 */
		if (model >= 0x40) {
			data->swap_core_select = 1;
			dev_warn(&pdev->dev, "Temperature readouts might be "
				 "wrong - check erratum #141\n");
		}

		if ((model >= 0x69) &&
		    !(model == 0xc1 || model == 0x6c || model == 0x7c ||
		      model == 0x6b || model == 0x6f || model == 0x7f)) {
			/*
			 * RevG desktop CPUs (i.e. no socket S1G1 or
			 * ASB1 parts) need additional offset,
			 * otherwise reported temperature is below
			 * ambient temperature
			 */
			data->temp_offset = 21000;
		}

		break;
	}

	pci_read_config_byte(pdev, REG_TEMP, &scfg);
	scfg &= ~(SEL_PLACE | SEL_CORE);		/* Select sensor 0, core0 */
	pci_write_config_byte(pdev, REG_TEMP, scfg);
	pci_read_config_byte(pdev, REG_TEMP, &scfg);

	if (scfg & (SEL_PLACE | SEL_CORE)) {
		dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n");
		err = -ENODEV;
		goto exit_free;
	}

	scfg |= (SEL_PLACE | SEL_CORE);
	pci_write_config_byte(pdev, REG_TEMP, scfg);

	/* now we know if we can change core and/or sensor */
	pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp);

	if (data->sensorsp & SEL_PLACE) {
		scfg &= ~SEL_CORE;	/* Select sensor 1, core0 */
		pci_write_config_byte(pdev, REG_TEMP, scfg);
		pci_read_config_dword(pdev, REG_TEMP, &temp);
		scfg |= SEL_CORE;	/* prepare for next selection */
		if (!((temp >> 16) & 0xff))	/* if temp is 0 -49C is not likely */
			data->sensorsp &= ~SEL_PLACE;
	}

	if (data->sensorsp & SEL_CORE) {
		scfg &= ~SEL_PLACE;	/* Select sensor 0, core1 */
		pci_write_config_byte(pdev, REG_TEMP, scfg);
		pci_read_config_dword(pdev, REG_TEMP, &temp);
		if (!((temp >> 16) & 0xff))	/* if temp is 0 -49C is not likely */
			data->sensorsp &= ~SEL_CORE;
	}

	data->name = "k8temp";
	mutex_init(&data->update_lock);
	dev_set_drvdata(&pdev->dev, data);

	/* Register sysfs hooks */
	err = device_create_file(&pdev->dev,
			   &sensor_dev_attr_temp1_input.dev_attr);
	if (err)
		goto exit_remove;

	/* sensor can be changed and reports something */
	if (data->sensorsp & SEL_PLACE) {
		err = device_create_file(&pdev->dev,
				   &sensor_dev_attr_temp2_input.dev_attr);
		if (err)
			goto exit_remove;
	}

	/* core can be changed and reports something */
	if (data->sensorsp & SEL_CORE) {
		err = device_create_file(&pdev->dev,
				   &sensor_dev_attr_temp3_input.dev_attr);
		if (err)
			goto exit_remove;
		if (data->sensorsp & SEL_PLACE) {
			err = device_create_file(&pdev->dev,
					   &sensor_dev_attr_temp4_input.
					   dev_attr);
			if (err)
				goto exit_remove;
		}
	}

	err = device_create_file(&pdev->dev, &dev_attr_name);
	if (err)
		goto exit_remove;

	data->hwmon_dev = hwmon_device_register(&pdev->dev);

	if (IS_ERR(data->hwmon_dev)) {
		err = PTR_ERR(data->hwmon_dev);
		goto exit_remove;
	}

	return 0;

exit_remove:
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp1_input.dev_attr);
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp2_input.dev_attr);
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp3_input.dev_attr);
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp4_input.dev_attr);
	device_remove_file(&pdev->dev, &dev_attr_name);
exit_free:
	dev_set_drvdata(&pdev->dev, NULL);
	kfree(data);
exit:
	return err;
}

static void __devexit k8temp_remove(struct pci_dev *pdev)
{
	struct k8temp_data *data = dev_get_drvdata(&pdev->dev);

	hwmon_device_unregister(data->hwmon_dev);
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp1_input.dev_attr);
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp2_input.dev_attr);
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp3_input.dev_attr);
	device_remove_file(&pdev->dev,
			   &sensor_dev_attr_temp4_input.dev_attr);
	device_remove_file(&pdev->dev, &dev_attr_name);
	dev_set_drvdata(&pdev->dev, NULL);
	kfree(data);
}

static struct pci_driver k8temp_driver = {
	.name = "k8temp",
	.id_table = k8temp_ids,
	.probe = k8temp_probe,
	.remove = __devexit_p(k8temp_remove),
};

static int __init k8temp_init(void)
{
	return pci_register_driver(&k8temp_driver);
}

static void __exit k8temp_exit(void)
{
	pci_unregister_driver(&k8temp_driver);
}

MODULE_AUTHOR("Rudolf Marek <[email protected]>");
MODULE_DESCRIPTION("AMD K8 core temperature monitor");
MODULE_LICENSE("GPL");

module_init(k8temp_init)
module_exit(k8temp_exit)
Commit	Line	Data
29fa06c1 RM	1	/*
	2	* k8temp.c - Linux kernel module for hardware monitoring
	3	*
7188cc66	4	* Copyright (C) 2006 Rudolf Marek <[email protected]>
29fa06c1 RM	5	*
	6	* Inspired from the w83785 and amd756 drivers.
	7	*
	8	* This program is free software; you can redistribute it and/or modify
	9	* it under the terms of the GNU General Public License as published by
	10	* the Free Software Foundation; either version 2 of the License, or
	11	* (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
	21	* 02110-1301 USA.
	22	*/
	23
	24	#include <linux/module.h>
	25	#include <linux/delay.h>
	26	#include <linux/init.h>
	27	#include <linux/slab.h>
	28	#include <linux/jiffies.h>
	29	#include <linux/pci.h>
	30	#include <linux/hwmon.h>
	31	#include <linux/hwmon-sysfs.h>
	32	#include <linux/err.h>
	33	#include <linux/mutex.h>
bb9a35f2	34	#include <asm/processor.h>
29fa06c1 RM	35
	36	#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
	37	#define REG_TEMP 0xe4
	38	#define SEL_PLACE 0x40
	39	#define SEL_CORE 0x04
	40
	41	struct k8temp_data {
1beeffe4	42	struct device *hwmon_dev;
29fa06c1 RM	43	struct mutex update_lock;
	44	const char *name;
	45	char valid; /* zero until following fields are valid */
	46	unsigned long last_updated; /* in jiffies */
	47
	48	/* registers values */
	49	u8 sensorsp; /* sensor presence bits - SEL_CORE & SEL_PLACE */
	50	u32 temp[2][2]; /* core, place */
a2e066bb	51	u8 swap_core_select; /* meaning of SEL_CORE is inverted */
76ff08da	52	u32 temp_offset;
29fa06c1 RM	53	};
	54
	55	static struct k8temp_data k8temp_update_device(struct device dev)
	56	{
	57	struct k8temp_data *data = dev_get_drvdata(dev);
	58	struct pci_dev *pdev = to_pci_dev(dev);
	59	u8 tmp;
	60
	61	mutex_lock(&data->update_lock);
	62
	63	if (!data->valid
	64	\|\| time_after(jiffies, data->last_updated + HZ)) {
	65	pci_read_config_byte(pdev, REG_TEMP, &tmp);
	66	tmp &= ~(SEL_PLACE \| SEL_CORE); /* Select sensor 0, core0 */
	67	pci_write_config_byte(pdev, REG_TEMP, tmp);
	68	pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]);
	69
	70	if (data->sensorsp & SEL_PLACE) {
	71	tmp \|= SEL_PLACE; /* Select sensor 1, core0 */
	72	pci_write_config_byte(pdev, REG_TEMP, tmp);
	73	pci_read_config_dword(pdev, REG_TEMP,
	74	&data->temp[0][1]);
	75	}
	76
	77	if (data->sensorsp & SEL_CORE) {
	78	tmp &= ~SEL_PLACE; /* Select sensor 0, core1 */
	79	tmp \|= SEL_CORE;
	80	pci_write_config_byte(pdev, REG_TEMP, tmp);
	81	pci_read_config_dword(pdev, REG_TEMP,
	82	&data->temp[1][0]);
	83
	84	if (data->sensorsp & SEL_PLACE) {
	85	tmp \|= SEL_PLACE; /* Select sensor 1, core1 */
	86	pci_write_config_byte(pdev, REG_TEMP, tmp);
	87	pci_read_config_dword(pdev, REG_TEMP,
	88	&data->temp[1][1]);
	89	}
	90	}
	91
	92	data->last_updated = jiffies;
	93	data->valid = 1;
	94	}
	95
	96	mutex_unlock(&data->update_lock);
	97	return data;
	98	}
	99
	100	/*
	101	* Sysfs stuff
	102	*/
	103
	104	static ssize_t show_name(struct device *dev, struct device_attribute
	105	devattr, char buf)
	106	{
	107	struct k8temp_data *data = dev_get_drvdata(dev);
	108
	109	return sprintf(buf, "%s\n", data->name);
	110	}
	111
	112
	113	static ssize_t show_temp(struct device *dev,
	114	struct device_attribute devattr, char buf)
	115	{
	116	struct sensor_device_attribute_2 *attr =
117	to_sensor_dev_attr_2(devattr);
118	int core = attr->nr;
119	int place = attr->index;
76ff08da	120	int temp;
29fa06c1 RM	121	struct k8temp_data *data = k8temp_update_device(dev);
29fa06c1 RM	122
cd4de21f	123	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
a2e066bb AH	124	core = core ? 0 : 1;
a2e066bb AH	125
76ff08da AH	126	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
	127
	128	return sprintf(buf, "%d\n", temp);
29fa06c1 RM	129	}
	130
	131	/* core, place */
	132
	133	static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
	134	static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
	135	static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 1, 0);
	136	static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 1, 1);
	137	static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
	138
3dd3a156	139	static const struct pci_device_id k8temp_ids[] = {
29fa06c1 RM	140	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
	141	{ 0 },
	142	};
	143
b17ebc94 JD	144	MODULE_DEVICE_TABLE(pci, k8temp_ids);
b17ebc94 JD	145
29fa06c1 RM	146	static int __devinit k8temp_probe(struct pci_dev *pdev,
	147	const struct pci_device_id *id)
	148	{
	149	int err;
	150	u8 scfg;
	151	u32 temp;
bb9a35f2	152	u8 model, stepping;
29fa06c1	153	struct k8temp_data *data;
29fa06c1 RM	154
	155	if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
	156	err = -ENOMEM;
	157	goto exit;
	158	}
	159
bb9a35f2 AH	160	model = boot_cpu_data.x86_model;
	161	stepping = boot_cpu_data.x86_mask;
	162
	163	switch (boot_cpu_data.x86) {
	164	case 0xf:
	165	/* feature available since SH-C0, exclude older revisions */
	166	if (((model == 4) && (stepping == 0)) \|\|
	167	((model == 5) && (stepping <= 1))) {
	168	err = -ENODEV;
	169	goto exit_free;
	170	}
	171
a2e066bb AH	172	/*
	173	* AMD NPT family 0fh, i.e. RevF and RevG:
	174	* meaning of SEL_CORE bit is inverted
	175	*/
bb9a35f2	176	if (model >= 0x40) {
a2e066bb	177	data->swap_core_select = 1;
bb9a35f2 AH	178	dev_warn(&pdev->dev, "Temperature readouts might be "
	179	"wrong - check erratum #141\n");
	180	}
	181
76ff08da	182	if ((model >= 0x69) &&
d535bad9 AH	183	!(model == 0xc1 \|\| model == 0x6c \|\| model == 0x7c \|\|
d535bad9 AH	184	model == 0x6b \|\| model == 0x6f \|\| model == 0x7f)) {
76ff08da	185	/*
d535bad9 AH	186	* RevG desktop CPUs (i.e. no socket S1G1 or
	187	* ASB1 parts) need additional offset,
	188	* otherwise reported temperature is below
	189	* ambient temperature
76ff08da AH	190	*/
	191	data->temp_offset = 21000;
	192	}
	193
bb9a35f2 AH	194	break;
	195	}
	196
29fa06c1 RM	197	pci_read_config_byte(pdev, REG_TEMP, &scfg);
	198	scfg &= ~(SEL_PLACE \| SEL_CORE); /* Select sensor 0, core0 */
	199	pci_write_config_byte(pdev, REG_TEMP, scfg);
	200	pci_read_config_byte(pdev, REG_TEMP, &scfg);
	201
	202	if (scfg & (SEL_PLACE \| SEL_CORE)) {
	203	dev_err(&pdev->dev, "Configuration bit(s) stuck at 1!\n");
	204	err = -ENODEV;
	205	goto exit_free;
	206	}
	207
	208	scfg \|= (SEL_PLACE \| SEL_CORE);
	209	pci_write_config_byte(pdev, REG_TEMP, scfg);
	210
	211	/* now we know if we can change core and/or sensor */
	212	pci_read_config_byte(pdev, REG_TEMP, &data->sensorsp);
	213
	214	if (data->sensorsp & SEL_PLACE) {
	215	scfg &= ~SEL_CORE; /* Select sensor 1, core0 */
	216	pci_write_config_byte(pdev, REG_TEMP, scfg);
	217	pci_read_config_dword(pdev, REG_TEMP, &temp);
	218	scfg \|= SEL_CORE; /* prepare for next selection */
	219	if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */
	220	data->sensorsp &= ~SEL_PLACE;
	221	}
	222
	223	if (data->sensorsp & SEL_CORE) {
	224	scfg &= ~SEL_PLACE; /* Select sensor 0, core1 */
	225	pci_write_config_byte(pdev, REG_TEMP, scfg);
	226	pci_read_config_dword(pdev, REG_TEMP, &temp);
	227	if (!((temp >> 16) & 0xff)) /* if temp is 0 -49C is not likely */
	228	data->sensorsp &= ~SEL_CORE;
	229	}
	230
	231	data->name = "k8temp";
	232	mutex_init(&data->update_lock);
	233	dev_set_drvdata(&pdev->dev, data);
	234
	235	/* Register sysfs hooks */
	236	err = device_create_file(&pdev->dev,
	237	&sensor_dev_attr_temp1_input.dev_attr);
	238	if (err)
	239	goto exit_remove;
	240
	241	/* sensor can be changed and reports something */
	242	if (data->sensorsp & SEL_PLACE) {
	243	err = device_create_file(&pdev->dev,
	244	&sensor_dev_attr_temp2_input.dev_attr);
	245	if (err)
	246	goto exit_remove;
	247	}
	248
	249	/* core can be changed and reports something */
	250	if (data->sensorsp & SEL_CORE) {
	251	err = device_create_file(&pdev->dev,
	252	&sensor_dev_attr_temp3_input.dev_attr);
	253	if (err)
	254	goto exit_remove;
df149d02	255	if (data->sensorsp & SEL_PLACE) {
29fa06c1 RM	256	err = device_create_file(&pdev->dev,
	257	&sensor_dev_attr_temp4_input.
	258	dev_attr);
	259	if (err)
	260	goto exit_remove;
df149d02	261	}
29fa06c1 RM	262	}
	263
	264	err = device_create_file(&pdev->dev, &dev_attr_name);
	265	if (err)
	266	goto exit_remove;
	267
1beeffe4	268	data->hwmon_dev = hwmon_device_register(&pdev->dev);
29fa06c1	269
1beeffe4 TJ	270	if (IS_ERR(data->hwmon_dev)) {
1beeffe4 TJ	271	err = PTR_ERR(data->hwmon_dev);
29fa06c1 RM	272	goto exit_remove;
	273	}
	274
	275	return 0;
	276
	277	exit_remove:
	278	device_remove_file(&pdev->dev,
	279	&sensor_dev_attr_temp1_input.dev_attr);
	280	device_remove_file(&pdev->dev,
	281	&sensor_dev_attr_temp2_input.dev_attr);
	282	device_remove_file(&pdev->dev,
	283	&sensor_dev_attr_temp3_input.dev_attr);
	284	device_remove_file(&pdev->dev,
	285	&sensor_dev_attr_temp4_input.dev_attr);
	286	device_remove_file(&pdev->dev, &dev_attr_name);
	287	exit_free:
	288	dev_set_drvdata(&pdev->dev, NULL);
	289	kfree(data);
	290	exit:
	291	return err;
	292	}
	293
	294	static void __devexit k8temp_remove(struct pci_dev *pdev)
	295	{
	296	struct k8temp_data *data = dev_get_drvdata(&pdev->dev);
	297
1beeffe4	298	hwmon_device_unregister(data->hwmon_dev);
29fa06c1 RM	299	device_remove_file(&pdev->dev,
	300	&sensor_dev_attr_temp1_input.dev_attr);
	301	device_remove_file(&pdev->dev,
	302	&sensor_dev_attr_temp2_input.dev_attr);
	303	device_remove_file(&pdev->dev,
	304	&sensor_dev_attr_temp3_input.dev_attr);
	305	device_remove_file(&pdev->dev,
	306	&sensor_dev_attr_temp4_input.dev_attr);
	307	device_remove_file(&pdev->dev, &dev_attr_name);
	308	dev_set_drvdata(&pdev->dev, NULL);
	309	kfree(data);
	310	}
	311
	312	static struct pci_driver k8temp_driver = {
	313	.name = "k8temp",
	314	.id_table = k8temp_ids,
	315	.probe = k8temp_probe,
	316	.remove = __devexit_p(k8temp_remove),
	317	};
	318
	319	static int __init k8temp_init(void)
	320	{
	321	return pci_register_driver(&k8temp_driver);
	322	}
	323
	324	static void __exit k8temp_exit(void)
	325	{
	326	pci_unregister_driver(&k8temp_driver);
	327	}
	328
7188cc66	329	MODULE_AUTHOR("Rudolf Marek <[email protected]>");
29fa06c1 RM	330	MODULE_DESCRIPTION("AMD K8 core temperature monitor");
	331	MODULE_LICENSE("GPL");
	332
	333	module_init(k8temp_init)
	334	module_exit(k8temp_exit)