projects / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 804a5dd6 JE |
1 | /* |
| 2 | * Common base for NXP LPC18xx and LPC43xx devices. | |
| 3 | * | |
| 4 | * Copyright 2015 Joachim Eastwood <[email protected]> | |
| 5 | * | |
| 6 | * This code is released using a dual license strategy: BSD/GPL | |
| 7 | * You can choose the licence that better fits your requirements. | |
| 8 | * | |
| 9 | * Released under the terms of 3-clause BSD License | |
| 10 | * Released under the terms of GNU General Public License Version 2.0 | |
| 11 | * | |
| 12 | */ | |
| 13 | ||
| 14 | #include "armv7-m.dtsi" | |
| 15 | ||
| 16 | / { | |
| 17 | cpus { | |
| 18 | #address-cells = <1>; | |
| 19 | #size-cells = <0>; | |
| 20 | ||
| 21 | cpu@0 { | |
| 22 | compatible = "arm,cortex-m3"; | |
| 23 | device_type = "cpu"; | |
| 24 | reg = <0x0>; | |
| 25 | }; | |
| 26 | }; | |
| 27 | ||
| 28 | clocks { | |
| 29 | xtal: xtal { | |
| 30 | compatible = "fixed-clock"; | |
| 31 | #clock-cells = <0>; | |
| 32 | clock-frequency = <12000000>; | |
| 33 | }; | |
| 34 | ||
| 35 | /* Temporary hardcode PLL1 until clk drivers are merged */ | |
| 36 | pll1: pll1 { | |
| 37 | compatible = "fixed-factor-clock"; | |
| 38 | clocks = <&xtal>; | |
| 39 | #clock-cells = <0>; | |
| 40 | clock-div = <1>; | |
| 41 | clock-mult = <12>; | |
| 42 | }; | |
| 43 | }; | |
| 44 | ||
| 45 | soc { | |
| 46 | uart0: serial@40081000 { | |
| 47 | compatible = "ns16550a"; | |
| 48 | reg = <0x40081000 0x1000>; | |
| 49 | reg-shift = <2>; | |
| 50 | interrupts = <24>; | |
| 51 | clocks = <&pll1>; | |
| 52 | status = "disabled"; | |
| 53 | }; | |
| 54 | ||
| 55 | uart1: serial@40082000 { | |
| 56 | compatible = "ns16550a"; | |
| 57 | reg = <0x40082000 0x1000>; | |
| 58 | reg-shift = <2>; | |
| 59 | interrupts = <25>; | |
| 60 | clocks = <&pll1>; | |
| 61 | status = "disabled"; | |
| 62 | }; | |
| 63 | ||
| 64 | timer0: timer@40084000 { | |
| 65 | compatible = "nxp,lpc3220-timer"; | |
| 66 | reg = <0x40084000 0x1000>; | |
| 67 | interrupts = <12>; | |
| 68 | clocks = <&pll1>; | |
| 69 | clock-names = "timerclk"; | |
| 70 | }; | |
| 71 | ||
| 72 | timer1: timer@40085000 { | |
| 73 | compatible = "nxp,lpc3220-timer"; | |
| 74 | reg = <0x40085000 0x1000>; | |
| 75 | interrupts = <13>; | |
| 76 | clocks = <&pll1>; | |
| 77 | clock-names = "timerclk"; | |
| 78 | }; | |
| 79 | ||
| 80 | uart2: serial@400c1000 { | |
| 81 | compatible = "ns16550a"; | |
| 82 | reg = <0x400c1000 0x1000>; | |
| 83 | reg-shift = <2>; | |
| 84 | interrupts = <26>; | |
| 85 | clocks = <&pll1>; | |
| 86 | status = "disabled"; | |
| 87 | }; | |
| 88 | ||
| 89 | uart3: serial@400c2000 { | |
| 90 | compatible = "ns16550a"; | |
| 91 | reg = <0x400c2000 0x1000>; | |
| 92 | reg-shift = <2>; | |
| 93 | interrupts = <27>; | |
| 94 | clocks = <&pll1>; | |
| 95 | status = "disabled"; | |
| 96 | }; | |
| 97 | ||
| 98 | timer2: timer@400c3000 { | |
| 99 | compatible = "nxp,lpc3220-timer"; | |
| 100 | reg = <0x400c3000 0x1000>; | |
| 101 | interrupts = <14>; | |
| 102 | clocks = <&pll1>; | |
| 103 | clock-names = "timerclk"; | |
| 104 | }; | |
| 105 | ||
| 106 | timer3: timer@400c4000 { | |
| 107 | compatible = "nxp,lpc3220-timer"; | |
| 108 | reg = <0x400c4000 0x1000>; | |
| 109 | interrupts = <15>; | |
| 110 | clocks = <&pll1>; | |
| 111 | clock-names = "timerclk"; | |
| 112 | }; | |
| 113 | }; | |
| 114 | }; |