]>
Commit | Line | Data |
---|---|---|
09d6292b JP |
1 | /* |
2 | * linux/drivers/mfd/aat2870-core.c | |
3 | * | |
4 | * Copyright (c) 2011, NVIDIA Corporation. | |
5 | * Author: Jin Park <[email protected]> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or | |
8 | * modify it under the terms of the GNU General Public License | |
9 | * version 2 as published by the Free Software Foundation. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, but | |
12 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
14 | * General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | |
19 | * 02110-1301 USA | |
20 | */ | |
21 | ||
22 | #include <linux/kernel.h> | |
23 | #include <linux/module.h> | |
24 | #include <linux/init.h> | |
25 | #include <linux/debugfs.h> | |
26 | #include <linux/slab.h> | |
27 | #include <linux/uaccess.h> | |
28 | #include <linux/i2c.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/gpio.h> | |
31 | #include <linux/mfd/core.h> | |
32 | #include <linux/mfd/aat2870.h> | |
33 | #include <linux/regulator/machine.h> | |
34 | ||
35 | static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = { | |
36 | /* readable, writeable, value */ | |
37 | { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */ | |
38 | { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */ | |
39 | { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */ | |
40 | { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */ | |
41 | { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */ | |
42 | { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */ | |
43 | { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */ | |
44 | { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */ | |
45 | { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */ | |
46 | { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */ | |
47 | { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */ | |
48 | { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */ | |
49 | { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */ | |
50 | { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */ | |
51 | { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */ | |
52 | { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */ | |
53 | { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */ | |
54 | { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */ | |
55 | { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */ | |
56 | { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */ | |
57 | { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */ | |
58 | { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */ | |
59 | { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */ | |
60 | { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */ | |
61 | { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */ | |
62 | { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */ | |
63 | { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */ | |
64 | { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */ | |
65 | { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */ | |
66 | { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */ | |
67 | { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */ | |
68 | { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */ | |
69 | { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */ | |
70 | { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */ | |
71 | { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */ | |
72 | { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */ | |
73 | { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */ | |
74 | { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */ | |
75 | { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */ | |
76 | }; | |
77 | ||
78 | static struct mfd_cell aat2870_devs[] = { | |
79 | { | |
80 | .name = "aat2870-backlight", | |
81 | .id = AAT2870_ID_BL, | |
82 | .pdata_size = sizeof(struct aat2870_bl_platform_data), | |
83 | }, | |
84 | { | |
85 | .name = "aat2870-regulator", | |
86 | .id = AAT2870_ID_LDOA, | |
87 | .pdata_size = sizeof(struct regulator_init_data), | |
88 | }, | |
89 | { | |
90 | .name = "aat2870-regulator", | |
91 | .id = AAT2870_ID_LDOB, | |
92 | .pdata_size = sizeof(struct regulator_init_data), | |
93 | }, | |
94 | { | |
95 | .name = "aat2870-regulator", | |
96 | .id = AAT2870_ID_LDOC, | |
97 | .pdata_size = sizeof(struct regulator_init_data), | |
98 | }, | |
99 | { | |
100 | .name = "aat2870-regulator", | |
101 | .id = AAT2870_ID_LDOD, | |
102 | .pdata_size = sizeof(struct regulator_init_data), | |
103 | }, | |
104 | }; | |
105 | ||
106 | static int __aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) | |
107 | { | |
108 | int ret; | |
109 | ||
110 | if (addr >= AAT2870_REG_NUM) { | |
111 | dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); | |
112 | return -EINVAL; | |
113 | } | |
114 | ||
115 | if (!aat2870->reg_cache[addr].readable) { | |
116 | *val = aat2870->reg_cache[addr].value; | |
117 | goto out; | |
118 | } | |
119 | ||
120 | ret = i2c_master_send(aat2870->client, &addr, 1); | |
121 | if (ret < 0) | |
122 | return ret; | |
123 | if (ret != 1) | |
124 | return -EIO; | |
125 | ||
126 | ret = i2c_master_recv(aat2870->client, val, 1); | |
127 | if (ret < 0) | |
128 | return ret; | |
129 | if (ret != 1) | |
130 | return -EIO; | |
131 | ||
132 | out: | |
133 | dev_dbg(aat2870->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val); | |
134 | return 0; | |
135 | } | |
136 | ||
137 | static int __aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) | |
138 | { | |
139 | u8 msg[2]; | |
140 | int ret; | |
141 | ||
142 | if (addr >= AAT2870_REG_NUM) { | |
143 | dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); | |
144 | return -EINVAL; | |
145 | } | |
146 | ||
147 | if (!aat2870->reg_cache[addr].writeable) { | |
148 | dev_err(aat2870->dev, "Address 0x%02x is not writeable\n", | |
149 | addr); | |
150 | return -EINVAL; | |
151 | } | |
152 | ||
153 | msg[0] = addr; | |
154 | msg[1] = val; | |
155 | ret = i2c_master_send(aat2870->client, msg, 2); | |
156 | if (ret < 0) | |
157 | return ret; | |
158 | if (ret != 2) | |
159 | return -EIO; | |
160 | ||
161 | aat2870->reg_cache[addr].value = val; | |
162 | ||
163 | dev_dbg(aat2870->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val); | |
164 | return 0; | |
165 | } | |
166 | ||
167 | static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) | |
168 | { | |
169 | int ret; | |
170 | ||
171 | mutex_lock(&aat2870->io_lock); | |
172 | ret = __aat2870_read(aat2870, addr, val); | |
173 | mutex_unlock(&aat2870->io_lock); | |
174 | ||
175 | return ret; | |
176 | } | |
177 | ||
178 | static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) | |
179 | { | |
180 | int ret; | |
181 | ||
182 | mutex_lock(&aat2870->io_lock); | |
183 | ret = __aat2870_write(aat2870, addr, val); | |
184 | mutex_unlock(&aat2870->io_lock); | |
185 | ||
186 | return ret; | |
187 | } | |
188 | ||
189 | static int aat2870_update(struct aat2870_data *aat2870, u8 addr, u8 mask, | |
190 | u8 val) | |
191 | { | |
192 | int change; | |
193 | u8 old_val, new_val; | |
194 | int ret; | |
195 | ||
196 | mutex_lock(&aat2870->io_lock); | |
197 | ||
198 | ret = __aat2870_read(aat2870, addr, &old_val); | |
199 | if (ret) | |
200 | goto out_unlock; | |
201 | ||
202 | new_val = (old_val & ~mask) | (val & mask); | |
203 | change = old_val != new_val; | |
204 | if (change) | |
205 | ret = __aat2870_write(aat2870, addr, new_val); | |
206 | ||
207 | out_unlock: | |
208 | mutex_unlock(&aat2870->io_lock); | |
209 | ||
210 | return ret; | |
211 | } | |
212 | ||
213 | static inline void aat2870_enable(struct aat2870_data *aat2870) | |
214 | { | |
215 | if (aat2870->en_pin >= 0) | |
216 | gpio_set_value(aat2870->en_pin, 1); | |
217 | ||
218 | aat2870->is_enable = 1; | |
219 | } | |
220 | ||
221 | static inline void aat2870_disable(struct aat2870_data *aat2870) | |
222 | { | |
223 | if (aat2870->en_pin >= 0) | |
224 | gpio_set_value(aat2870->en_pin, 0); | |
225 | ||
226 | aat2870->is_enable = 0; | |
227 | } | |
228 | ||
229 | #ifdef CONFIG_DEBUG_FS | |
230 | static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf) | |
231 | { | |
232 | u8 addr, val; | |
233 | ssize_t count = 0; | |
234 | int ret; | |
235 | ||
236 | count += sprintf(buf, "aat2870 registers\n"); | |
237 | for (addr = 0; addr < AAT2870_REG_NUM; addr++) { | |
238 | count += sprintf(buf + count, "0x%02x: ", addr); | |
239 | if (count >= PAGE_SIZE - 1) | |
240 | break; | |
241 | ||
242 | ret = aat2870->read(aat2870, addr, &val); | |
243 | if (ret == 0) | |
244 | count += snprintf(buf + count, PAGE_SIZE - count, | |
245 | "0x%02x", val); | |
246 | else | |
247 | count += snprintf(buf + count, PAGE_SIZE - count, | |
248 | "<read fail: %d>", ret); | |
249 | ||
250 | if (count >= PAGE_SIZE - 1) | |
251 | break; | |
252 | ||
253 | count += snprintf(buf + count, PAGE_SIZE - count, "\n"); | |
254 | if (count >= PAGE_SIZE - 1) | |
255 | break; | |
256 | } | |
257 | ||
258 | /* Truncate count; min() would cause a warning */ | |
259 | if (count >= PAGE_SIZE) | |
260 | count = PAGE_SIZE - 1; | |
261 | ||
262 | return count; | |
263 | } | |
264 | ||
09d6292b JP |
265 | static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf, |
266 | size_t count, loff_t *ppos) | |
267 | { | |
268 | struct aat2870_data *aat2870 = file->private_data; | |
269 | char *buf; | |
270 | ssize_t ret; | |
271 | ||
272 | buf = kmalloc(PAGE_SIZE, GFP_KERNEL); | |
273 | if (!buf) | |
274 | return -ENOMEM; | |
275 | ||
276 | ret = aat2870_dump_reg(aat2870, buf); | |
277 | if (ret >= 0) | |
278 | ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); | |
279 | ||
280 | kfree(buf); | |
281 | ||
282 | return ret; | |
283 | } | |
284 | ||
285 | static ssize_t aat2870_reg_write_file(struct file *file, | |
286 | const char __user *user_buf, size_t count, | |
287 | loff_t *ppos) | |
288 | { | |
289 | struct aat2870_data *aat2870 = file->private_data; | |
290 | char buf[32]; | |
c38d66ac | 291 | ssize_t buf_size; |
09d6292b JP |
292 | char *start = buf; |
293 | unsigned long addr, val; | |
294 | int ret; | |
295 | ||
ecf67ac3 | 296 | buf_size = min(count, (size_t)(sizeof(buf)-1)); |
09d6292b JP |
297 | if (copy_from_user(buf, user_buf, buf_size)) { |
298 | dev_err(aat2870->dev, "Failed to copy from user\n"); | |
299 | return -EFAULT; | |
300 | } | |
301 | buf[buf_size] = 0; | |
302 | ||
303 | while (*start == ' ') | |
304 | start++; | |
305 | ||
0ebc1c25 LJ |
306 | ret = kstrtoul(start, 16, &addr); |
307 | if (ret) | |
308 | return ret; | |
309 | ||
09d6292b JP |
310 | if (addr >= AAT2870_REG_NUM) { |
311 | dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr); | |
312 | return -EINVAL; | |
313 | } | |
314 | ||
315 | while (*start == ' ') | |
316 | start++; | |
317 | ||
8420a241 JH |
318 | ret = kstrtoul(start, 16, &val); |
319 | if (ret) | |
320 | return ret; | |
09d6292b JP |
321 | |
322 | ret = aat2870->write(aat2870, (u8)addr, (u8)val); | |
323 | if (ret) | |
324 | return ret; | |
325 | ||
326 | return buf_size; | |
327 | } | |
328 | ||
329 | static const struct file_operations aat2870_reg_fops = { | |
234e3405 | 330 | .open = simple_open, |
09d6292b JP |
331 | .read = aat2870_reg_read_file, |
332 | .write = aat2870_reg_write_file, | |
333 | }; | |
334 | ||
335 | static void aat2870_init_debugfs(struct aat2870_data *aat2870) | |
336 | { | |
337 | aat2870->dentry_root = debugfs_create_dir("aat2870", NULL); | |
338 | if (!aat2870->dentry_root) { | |
339 | dev_warn(aat2870->dev, | |
340 | "Failed to create debugfs root directory\n"); | |
341 | return; | |
342 | } | |
343 | ||
344 | aat2870->dentry_reg = debugfs_create_file("regs", 0644, | |
345 | aat2870->dentry_root, | |
346 | aat2870, &aat2870_reg_fops); | |
347 | if (!aat2870->dentry_reg) | |
348 | dev_warn(aat2870->dev, | |
349 | "Failed to create debugfs register file\n"); | |
350 | } | |
351 | ||
352 | static void aat2870_uninit_debugfs(struct aat2870_data *aat2870) | |
353 | { | |
354 | debugfs_remove_recursive(aat2870->dentry_root); | |
355 | } | |
356 | #else | |
357 | static inline void aat2870_init_debugfs(struct aat2870_data *aat2870) | |
358 | { | |
359 | } | |
360 | ||
361 | static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870) | |
362 | { | |
363 | } | |
364 | #endif /* CONFIG_DEBUG_FS */ | |
365 | ||
366 | static int aat2870_i2c_probe(struct i2c_client *client, | |
367 | const struct i2c_device_id *id) | |
368 | { | |
334a41ce | 369 | struct aat2870_platform_data *pdata = dev_get_platdata(&client->dev); |
09d6292b JP |
370 | struct aat2870_data *aat2870; |
371 | int i, j; | |
372 | int ret = 0; | |
373 | ||
0287714b JH |
374 | aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data), |
375 | GFP_KERNEL); | |
09d6292b JP |
376 | if (!aat2870) { |
377 | dev_err(&client->dev, | |
378 | "Failed to allocate memory for aat2870\n"); | |
0287714b | 379 | return -ENOMEM; |
09d6292b JP |
380 | } |
381 | ||
382 | aat2870->dev = &client->dev; | |
383 | dev_set_drvdata(aat2870->dev, aat2870); | |
384 | ||
385 | aat2870->client = client; | |
386 | i2c_set_clientdata(client, aat2870); | |
387 | ||
388 | aat2870->reg_cache = aat2870_regs; | |
389 | ||
390 | if (pdata->en_pin < 0) | |
391 | aat2870->en_pin = -1; | |
392 | else | |
393 | aat2870->en_pin = pdata->en_pin; | |
394 | ||
395 | aat2870->init = pdata->init; | |
396 | aat2870->uninit = pdata->uninit; | |
397 | aat2870->read = aat2870_read; | |
398 | aat2870->write = aat2870_write; | |
399 | aat2870->update = aat2870_update; | |
400 | ||
401 | mutex_init(&aat2870->io_lock); | |
402 | ||
403 | if (aat2870->init) | |
404 | aat2870->init(aat2870); | |
405 | ||
406 | if (aat2870->en_pin >= 0) { | |
0287714b JH |
407 | ret = devm_gpio_request_one(&client->dev, aat2870->en_pin, |
408 | GPIOF_OUT_INIT_HIGH, "aat2870-en"); | |
09d6292b JP |
409 | if (ret < 0) { |
410 | dev_err(&client->dev, | |
411 | "Failed to request GPIO %d\n", aat2870->en_pin); | |
0287714b | 412 | return ret; |
09d6292b | 413 | } |
09d6292b JP |
414 | } |
415 | ||
416 | aat2870_enable(aat2870); | |
417 | ||
418 | for (i = 0; i < pdata->num_subdevs; i++) { | |
419 | for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) { | |
420 | if ((pdata->subdevs[i].id == aat2870_devs[j].id) && | |
421 | !strcmp(pdata->subdevs[i].name, | |
422 | aat2870_devs[j].name)) { | |
423 | aat2870_devs[j].platform_data = | |
424 | pdata->subdevs[i].platform_data; | |
425 | break; | |
426 | } | |
427 | } | |
428 | } | |
429 | ||
430 | ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, | |
0848c94f | 431 | ARRAY_SIZE(aat2870_devs), NULL, 0, NULL); |
09d6292b JP |
432 | if (ret != 0) { |
433 | dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); | |
434 | goto out_disable; | |
435 | } | |
436 | ||
437 | aat2870_init_debugfs(aat2870); | |
438 | ||
439 | return 0; | |
440 | ||
441 | out_disable: | |
442 | aat2870_disable(aat2870); | |
09d6292b JP |
443 | return ret; |
444 | } | |
445 | ||
446 | static int aat2870_i2c_remove(struct i2c_client *client) | |
447 | { | |
448 | struct aat2870_data *aat2870 = i2c_get_clientdata(client); | |
449 | ||
450 | aat2870_uninit_debugfs(aat2870); | |
451 | ||
452 | mfd_remove_devices(aat2870->dev); | |
453 | aat2870_disable(aat2870); | |
09d6292b JP |
454 | if (aat2870->uninit) |
455 | aat2870->uninit(aat2870); | |
09d6292b JP |
456 | |
457 | return 0; | |
458 | } | |
459 | ||
5214e565 MB |
460 | #ifdef CONFIG_PM_SLEEP |
461 | static int aat2870_i2c_suspend(struct device *dev) | |
09d6292b | 462 | { |
5214e565 | 463 | struct i2c_client *client = to_i2c_client(dev); |
09d6292b JP |
464 | struct aat2870_data *aat2870 = i2c_get_clientdata(client); |
465 | ||
466 | aat2870_disable(aat2870); | |
467 | ||
468 | return 0; | |
469 | } | |
470 | ||
5214e565 | 471 | static int aat2870_i2c_resume(struct device *dev) |
09d6292b | 472 | { |
5214e565 | 473 | struct i2c_client *client = to_i2c_client(dev); |
09d6292b JP |
474 | struct aat2870_data *aat2870 = i2c_get_clientdata(client); |
475 | struct aat2870_register *reg = NULL; | |
476 | int i; | |
477 | ||
478 | aat2870_enable(aat2870); | |
479 | ||
480 | /* restore registers */ | |
481 | for (i = 0; i < AAT2870_REG_NUM; i++) { | |
482 | reg = &aat2870->reg_cache[i]; | |
483 | if (reg->writeable) | |
484 | aat2870->write(aat2870, i, reg->value); | |
485 | } | |
486 | ||
487 | return 0; | |
488 | } | |
5214e565 MB |
489 | #endif /* CONFIG_PM_SLEEP */ |
490 | ||
491 | static SIMPLE_DEV_PM_OPS(aat2870_pm_ops, aat2870_i2c_suspend, | |
492 | aat2870_i2c_resume); | |
09d6292b | 493 | |
d4e94863 | 494 | static const struct i2c_device_id aat2870_i2c_id_table[] = { |
09d6292b JP |
495 | { "aat2870", 0 }, |
496 | { } | |
497 | }; | |
498 | MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table); | |
499 | ||
500 | static struct i2c_driver aat2870_i2c_driver = { | |
501 | .driver = { | |
502 | .name = "aat2870", | |
503 | .owner = THIS_MODULE, | |
5214e565 | 504 | .pm = &aat2870_pm_ops, |
09d6292b JP |
505 | }, |
506 | .probe = aat2870_i2c_probe, | |
507 | .remove = aat2870_i2c_remove, | |
09d6292b JP |
508 | .id_table = aat2870_i2c_id_table, |
509 | }; | |
510 | ||
511 | static int __init aat2870_init(void) | |
512 | { | |
513 | return i2c_add_driver(&aat2870_i2c_driver); | |
514 | } | |
515 | subsys_initcall(aat2870_init); | |
516 | ||
517 | static void __exit aat2870_exit(void) | |
518 | { | |
519 | i2c_del_driver(&aat2870_i2c_driver); | |
520 | } | |
521 | module_exit(aat2870_exit); | |
522 | ||
523 | MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870"); | |
524 | MODULE_LICENSE("GPL"); | |
525 | MODULE_AUTHOR("Jin Park <[email protected]>"); |