[linux.git] / drivers / ata / pata_atiixp.c

/*
 * pata_atiixp.c 	- ATI PATA for new ATA layer
 *			  (C) 2005 Red Hat Inc
 *			  (C) 2009-2010 Bartlomiej Zolnierkiewicz
 *
 * Based on
 *
 *  linux/drivers/ide/pci/atiixp.c	Version 0.01-bart2	Feb. 26, 2004
 *
 *  Copyright (C) 2003 ATI Inc. <[email protected]>
 *  Copyright (C) 2004 Bartlomiej Zolnierkiewicz
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>

#define DRV_NAME "pata_atiixp"
#define DRV_VERSION "0.4.6"

enum {
	ATIIXP_IDE_PIO_TIMING	= 0x40,
	ATIIXP_IDE_MWDMA_TIMING	= 0x44,
	ATIIXP_IDE_PIO_CONTROL	= 0x48,
	ATIIXP_IDE_PIO_MODE	= 0x4a,
	ATIIXP_IDE_UDMA_CONTROL	= 0x54,
	ATIIXP_IDE_UDMA_MODE 	= 0x56
};

static int atiixp_cable_detect(struct ata_port *ap)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	u8 udma;

	/* Hack from drivers/ide/pci. Really we want to know how to do the
	   raw detection not play follow the bios mode guess */
	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
		return  ATA_CBL_PATA80;
	return ATA_CBL_PATA40;
}

static DEFINE_SPINLOCK(atiixp_lock);

/**
 *	atiixp_prereset	-	perform reset handling
 *	@link: ATA link
 *	@deadline: deadline jiffies for the operation
 *
 *	Reset sequence checking enable bits to see which ports are
 *	active.
 */

static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
{
	static const struct pci_bits atiixp_enable_bits[] = {
		{ 0x48, 1, 0x01, 0x00 },
		{ 0x48, 1, 0x08, 0x00 }
	};

	struct ata_port *ap = link->ap;
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);

	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
		return -ENOENT;

	return ata_sff_prereset(link, deadline);
}

/**
 *	atiixp_set_pio_timing	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called by both the pio and dma setup functions to set the controller
 *	timings for PIO transfers. We must load both the mode number and
 *	timing values into the controller.
 */

static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
{
	static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };

	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int dn = 2 * ap->port_no + adev->devno;
	int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
	u32 pio_timing_data;
	u16 pio_mode_data;

	pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
	pio_mode_data &= ~(0x7 << (4 * dn));
	pio_mode_data |= pio << (4 * dn);
	pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);

	pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
	pio_timing_data &= ~(0xFF << timing_shift);
	pio_timing_data |= (pio_timings[pio] << timing_shift);
	pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
}

/**
 *	atiixp_set_piomode	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the PIO mode setup. We use a shared helper for this
 *	as the DMA setup must also adjust the PIO timing information.
 */

static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	unsigned long flags;
	spin_lock_irqsave(&atiixp_lock, flags);
	atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
	spin_unlock_irqrestore(&atiixp_lock, flags);
}

/**
 *	atiixp_set_dmamode	-	set initial DMA mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the DMA mode setup. We use timing tables for most
 *	modes but must tune an appropriate PIO mode to match.
 */

static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };

	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int dma = adev->dma_mode;
	int dn = 2 * ap->port_no + adev->devno;
	int wanted_pio;
	unsigned long flags;

	spin_lock_irqsave(&atiixp_lock, flags);

	if (adev->dma_mode >= XFER_UDMA_0) {
		u16 udma_mode_data;

		dma -= XFER_UDMA_0;

		pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
		udma_mode_data &= ~(0x7 << (4 * dn));
		udma_mode_data |= dma << (4 * dn);
		pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
	} else {
		int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
		u32 mwdma_timing_data;

		dma -= XFER_MW_DMA_0;

		pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
				      &mwdma_timing_data);
		mwdma_timing_data &= ~(0xFF << timing_shift);
		mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
		pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
				       mwdma_timing_data);
	}
	/*
	 *	We must now look at the PIO mode situation. We may need to
	 *	adjust the PIO mode to keep the timings acceptable
	 */
	 if (adev->dma_mode >= XFER_MW_DMA_2)
	 	wanted_pio = 4;
	else if (adev->dma_mode == XFER_MW_DMA_1)
		wanted_pio = 3;
	else if (adev->dma_mode == XFER_MW_DMA_0)
		wanted_pio = 0;
	else BUG();

	if (adev->pio_mode != wanted_pio)
		atiixp_set_pio_timing(ap, adev, wanted_pio);
	spin_unlock_irqrestore(&atiixp_lock, flags);
}

/**
 *	atiixp_bmdma_start	-	DMA start callback
 *	@qc: Command in progress
 *
 *	When DMA begins we need to ensure that the UDMA control
 *	register for the channel is correctly set.
 *
 *	Note: The host lock held by the libata layer protects
 *	us from two channels both trying to set DMA bits at once
 */

static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;

	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int dn = (2 * ap->port_no) + adev->devno;
	u16 tmp16;

	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
	if (ata_using_udma(adev))
		tmp16 |= (1 << dn);
	else
		tmp16 &= ~(1 << dn);
	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
	ata_bmdma_start(qc);
}

/**
 *	atiixp_dma_stop	-	DMA stop callback
 *	@qc: Command in progress
 *
 *	DMA has completed. Clear the UDMA flag as the next operations will
 *	be PIO ones not UDMA data transfer.
 *
 *	Note: The host lock held by the libata layer protects
 *	us from two channels both trying to set DMA bits at once
 */

static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int dn = (2 * ap->port_no) + qc->dev->devno;
	u16 tmp16;

	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
	tmp16 &= ~(1 << dn);
	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
	ata_bmdma_stop(qc);
}

static struct scsi_host_template atiixp_sht = {
	ATA_BMDMA_SHT(DRV_NAME),
	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
};

static struct ata_port_operations atiixp_port_ops = {
	.inherits	= &ata_bmdma_port_ops,

	.qc_prep 	= ata_bmdma_dumb_qc_prep,
	.bmdma_start 	= atiixp_bmdma_start,
	.bmdma_stop	= atiixp_bmdma_stop,

	.prereset	= atiixp_prereset,
	.cable_detect	= atiixp_cable_detect,
	.set_piomode	= atiixp_set_piomode,
	.set_dmamode	= atiixp_set_dmamode,
};

static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
	static const struct ata_port_info info = {
		.flags = ATA_FLAG_SLAVE_POSS,
		.pio_mask = ATA_PIO4,
		.mwdma_mask = ATA_MWDMA12_ONLY,
		.udma_mask = ATA_UDMA5,
		.port_ops = &atiixp_port_ops
	};
	const struct ata_port_info *ppi[] = { &info, &info };

	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
				      ATA_HOST_PARALLEL_SCAN);
}

static const struct pci_device_id atiixp[] = {
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },

	{ },
};

static struct pci_driver atiixp_pci_driver = {
	.name 		= DRV_NAME,
	.id_table	= atiixp,
	.probe 		= atiixp_init_one,
	.remove		= ata_pci_remove_one,
#ifdef CONFIG_PM
	.resume		= ata_pci_device_resume,
	.suspend	= ata_pci_device_suspend,
#endif
};

static int __init atiixp_init(void)
{
	return pci_register_driver(&atiixp_pci_driver);
}


static void __exit atiixp_exit(void)
{
	pci_unregister_driver(&atiixp_pci_driver);
}

MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, atiixp);
MODULE_VERSION(DRV_VERSION);

module_init(atiixp_init);
module_exit(atiixp_exit);
Commit	Line	Data
669a5db4 JG	1	/*
	2	* pata_atiixp.c - ATI PATA for new ATA layer
	3	* (C) 2005 Red Hat Inc
e99846f1	4	* (C) 2009-2010 Bartlomiej Zolnierkiewicz
669a5db4 JG	5	*
	6	* Based on
	7	*
	8	* linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
	9	*
	10	* Copyright (C) 2003 ATI Inc. <[email protected]>
	11	* Copyright (C) 2004 Bartlomiej Zolnierkiewicz
	12	*
	13	*/
	14
	15	#include <linux/kernel.h>
	16	#include <linux/module.h>
	17	#include <linux/pci.h>
	18	#include <linux/init.h>
	19	#include <linux/blkdev.h>
	20	#include <linux/delay.h>
	21	#include <scsi/scsi_host.h>
	22	#include <linux/libata.h>
	23
	24	#define DRV_NAME "pata_atiixp"
2a3103ce	25	#define DRV_VERSION "0.4.6"
669a5db4 JG	26
	27	enum {
	28	ATIIXP_IDE_PIO_TIMING = 0x40,
	29	ATIIXP_IDE_MWDMA_TIMING = 0x44,
	30	ATIIXP_IDE_PIO_CONTROL = 0x48,
	31	ATIIXP_IDE_PIO_MODE = 0x4a,
	32	ATIIXP_IDE_UDMA_CONTROL = 0x54,
	33	ATIIXP_IDE_UDMA_MODE = 0x56
	34	};
	35
84708606 AC	36	static int atiixp_cable_detect(struct ata_port *ap)
	37	{
	38	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	39	u8 udma;
	40
	41	/* Hack from drivers/ide/pci. Really we want to know how to do the
	42	raw detection not play follow the bios mode guess */
	43	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
	44	if ((udma & 0x07) >= 0x04 \|\| (udma & 0x70) >= 0x40)
	45	return ATA_CBL_PATA80;
	46	return ATA_CBL_PATA40;
	47	}
	48
e99846f1 BZ	49	static DEFINE_SPINLOCK(atiixp_lock);
e99846f1 BZ	50
46b9e770 BZ	51	/**
	52	* atiixp_prereset - perform reset handling
	53	* @link: ATA link
	54	* @deadline: deadline jiffies for the operation
	55	*
	56	* Reset sequence checking enable bits to see which ports are
	57	* active.
	58	*/
	59
	60	static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
	61	{
	62	static const struct pci_bits atiixp_enable_bits[] = {
	63	{ 0x48, 1, 0x01, 0x00 },
	64	{ 0x48, 1, 0x08, 0x00 }
	65	};
	66
	67	struct ata_port *ap = link->ap;
	68	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	69
	70	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
	71	return -ENOENT;
	72
	73	return ata_sff_prereset(link, deadline);
	74	}
	75
669a5db4 JG	76	/**
	77	* atiixp_set_pio_timing - set initial PIO mode data
	78	* @ap: ATA interface
	79	* @adev: ATA device
	80	*
	81	* Called by both the pio and dma setup functions to set the controller
	82	* timings for PIO transfers. We must load both the mode number and
	83	* timing values into the controller.
	84	*/
	85
	86	static void atiixp_set_pio_timing(struct ata_port ap, struct ata_device adev, int pio)
	87	{
	88	static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
	89
	90	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	91	int dn = 2 * ap->port_no + adev->devno;
669a5db4	92	int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
1fd4bbec BZ	93	u32 pio_timing_data;
1fd4bbec BZ	94	u16 pio_mode_data;
669a5db4 JG	95
	96	pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
	97	pio_mode_data &= ~(0x7 << (4 * dn));
	98	pio_mode_data \|= pio << (4 * dn);
	99	pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
	100
1fd4bbec	101	pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
d7b5a23f JG	102	pio_timing_data &= ~(0xFF << timing_shift);
d7b5a23f JG	103	pio_timing_data \|= (pio_timings[pio] << timing_shift);
1fd4bbec	104	pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
669a5db4 JG	105	}
	106
	107	/**
	108	* atiixp_set_piomode - set initial PIO mode data
	109	* @ap: ATA interface
	110	* @adev: ATA device
	111	*
	112	* Called to do the PIO mode setup. We use a shared helper for this
	113	* as the DMA setup must also adjust the PIO timing information.
	114	*/
	115
	116	static void atiixp_set_piomode(struct ata_port ap, struct ata_device adev)
	117	{
e99846f1 BZ	118	unsigned long flags;
e99846f1 BZ	119	spin_lock_irqsave(&atiixp_lock, flags);
669a5db4	120	atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
e99846f1	121	spin_unlock_irqrestore(&atiixp_lock, flags);
669a5db4 JG	122	}
	123
	124	/**
	125	* atiixp_set_dmamode - set initial DMA mode data
	126	* @ap: ATA interface
	127	* @adev: ATA device
	128	*
	129	* Called to do the DMA mode setup. We use timing tables for most
	130	* modes but must tune an appropriate PIO mode to match.
	131	*/
	132
	133	static void atiixp_set_dmamode(struct ata_port ap, struct ata_device adev)
	134	{
	135	static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };
	136
	137	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	138	int dma = adev->dma_mode;
	139	int dn = 2 * ap->port_no + adev->devno;
	140	int wanted_pio;
e99846f1 BZ	141	unsigned long flags;
	142
	143	spin_lock_irqsave(&atiixp_lock, flags);
669a5db4 JG	144
	145	if (adev->dma_mode >= XFER_UDMA_0) {
	146	u16 udma_mode_data;
	147
	148	dma -= XFER_UDMA_0;
	149
	150	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
	151	udma_mode_data &= ~(0x7 << (4 * dn));
	152	udma_mode_data \|= dma << (4 * dn);
	153	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
	154	} else {
669a5db4	155	int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
1fd4bbec	156	u32 mwdma_timing_data;
669a5db4 JG	157
	158	dma -= XFER_MW_DMA_0;
	159
1fd4bbec BZ	160	pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
1fd4bbec BZ	161	&mwdma_timing_data);
669a5db4 JG	162	mwdma_timing_data &= ~(0xFF << timing_shift);
669a5db4 JG	163	mwdma_timing_data \|= (mwdma_timings[dma] << timing_shift);
1fd4bbec BZ	164	pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
1fd4bbec BZ	165	mwdma_timing_data);
669a5db4 JG	166	}
	167	/*
	168	* We must now look at the PIO mode situation. We may need to
	169	* adjust the PIO mode to keep the timings acceptable
	170	*/
	171	if (adev->dma_mode >= XFER_MW_DMA_2)
	172	wanted_pio = 4;
	173	else if (adev->dma_mode == XFER_MW_DMA_1)
	174	wanted_pio = 3;
	175	else if (adev->dma_mode == XFER_MW_DMA_0)
	176	wanted_pio = 0;
	177	else BUG();
	178
	179	if (adev->pio_mode != wanted_pio)
	180	atiixp_set_pio_timing(ap, adev, wanted_pio);
e99846f1	181	spin_unlock_irqrestore(&atiixp_lock, flags);
669a5db4 JG	182	}
	183
	184	/**
	185	* atiixp_bmdma_start - DMA start callback
	186	* @qc: Command in progress
	187	*
	188	* When DMA begins we need to ensure that the UDMA control
	189	* register for the channel is correctly set.
21d2c925 AC	190	*
	191	* Note: The host lock held by the libata layer protects
	192	* us from two channels both trying to set DMA bits at once
669a5db4 JG	193	*/
	194
	195	static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
	196	{
	197	struct ata_port *ap = qc->ap;
	198	struct ata_device *adev = qc->dev;
	199
	200	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	201	int dn = (2 * ap->port_no) + adev->devno;
	202	u16 tmp16;
	203
	204	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
b15b3eba	205	if (ata_using_udma(adev))
669a5db4 JG	206	tmp16 \|= (1 << dn);
	207	else
	208	tmp16 &= ~(1 << dn);
	209	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
	210	ata_bmdma_start(qc);
	211	}
	212
	213	/**
	214	* atiixp_dma_stop - DMA stop callback
	215	* @qc: Command in progress
	216	*
	217	* DMA has completed. Clear the UDMA flag as the next operations will
	218	* be PIO ones not UDMA data transfer.
21d2c925 AC	219	*
	220	* Note: The host lock held by the libata layer protects
	221	* us from two channels both trying to set DMA bits at once
669a5db4 JG	222	*/
	223
	224	static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
	225	{
	226	struct ata_port *ap = qc->ap;
	227	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	228	int dn = (2 * ap->port_no) + qc->dev->devno;
	229	u16 tmp16;
	230
	231	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
	232	tmp16 &= ~(1 << dn);
	233	pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
	234	ata_bmdma_stop(qc);
	235	}
	236
	237	static struct scsi_host_template atiixp_sht = {
68d1d07b	238	ATA_BMDMA_SHT(DRV_NAME),
635adc28	239	.sg_tablesize = LIBATA_DUMB_MAX_PRD,
669a5db4 JG	240	};
	241
	242	static struct ata_port_operations atiixp_port_ops = {
029cfd6b	243	.inherits = &ata_bmdma_port_ops,
669a5db4	244
f47451c4	245	.qc_prep = ata_bmdma_dumb_qc_prep,
669a5db4 JG	246	.bmdma_start = atiixp_bmdma_start,
669a5db4 JG	247	.bmdma_stop = atiixp_bmdma_stop,
bda30288	248
46b9e770	249	.prereset = atiixp_prereset,
029cfd6b TH	250	.cable_detect = atiixp_cable_detect,
	251	.set_piomode = atiixp_set_piomode,
	252	.set_dmamode = atiixp_set_dmamode,
669a5db4 JG	253	};
669a5db4 JG	254
16028232	255	static int atiixp_init_one(struct pci_dev pdev, const struct pci_device_id id)
669a5db4	256	{
1626aeb8	257	static const struct ata_port_info info = {
1d2808fd	258	.flags = ATA_FLAG_SLAVE_POSS,
14bdef98 EIB	259	.pio_mask = ATA_PIO4,
	260	.mwdma_mask = ATA_MWDMA12_ONLY,
	261	.udma_mask = ATA_UDMA5,
669a5db4 JG	262	.port_ops = &atiixp_port_ops
669a5db4 JG	263	};
16028232	264	const struct ata_port_info *ppi[] = { &info, &info };
16028232	265
1c5afdf7 TH	266	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
1c5afdf7 TH	267	ATA_HOST_PARALLEL_SCAN);
669a5db4 JG	268	}
669a5db4 JG	269
2d2744fc JG	270	static const struct pci_device_id atiixp[] = {
	271	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
	272	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
	273	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
	274	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
1ca972c2	275	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
5deab536	276	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
2d2744fc JG	277
2d2744fc JG	278	{ },
669a5db4 JG	279	};
	280
	281	static struct pci_driver atiixp_pci_driver = {
	282	.name = DRV_NAME,
	283	.id_table = atiixp,
	284	.probe = atiixp_init_one,
30ced0f0	285	.remove = ata_pci_remove_one,
438ac6d5	286	#ifdef CONFIG_PM
30ced0f0 AC	287	.resume = ata_pci_device_resume,
30ced0f0 AC	288	.suspend = ata_pci_device_suspend,
438ac6d5	289	#endif
669a5db4 JG	290	};
	291
	292	static int __init atiixp_init(void)
	293	{
	294	return pci_register_driver(&atiixp_pci_driver);
	295	}
	296
	297
	298	static void __exit atiixp_exit(void)
	299	{
	300	pci_unregister_driver(&atiixp_pci_driver);
	301	}
	302
669a5db4 JG	303	MODULE_AUTHOR("Alan Cox");
	304	MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
	305	MODULE_LICENSE("GPL");
	306	MODULE_DEVICE_TABLE(pci, atiixp);
	307	MODULE_VERSION(DRV_VERSION);
	308
	309	module_init(atiixp_init);
	310	module_exit(atiixp_exit);