[linux.git] / security / Kconfig

#
# Security configuration
#

menu "Security options"

config KEYS
	bool "Enable access key retention support"
	help
	  This option provides support for retaining authentication tokens and
	  access keys in the kernel.

	  It also includes provision of methods by which such keys might be
	  associated with a process so that network filesystems, encryption
	  support and the like can find them.

	  Furthermore, a special type of key is available that acts as keyring:
	  a searchable sequence of keys. Each process is equipped with access
	  to five standard keyrings: UID-specific, GID-specific, session,
	  process and thread.

	  If you are unsure as to whether this is required, answer N.

config KEYS_DEBUG_PROC_KEYS
	bool "Enable the /proc/keys file by which keys may be viewed"
	depends on KEYS
	help
	  This option turns on support for the /proc/keys file - through which
	  can be listed all the keys on the system that are viewable by the
	  reading process.

	  The only keys included in the list are those that grant View
	  permission to the reading process whether or not it possesses them.
	  Note that LSM security checks are still performed, and may further
	  filter out keys that the current process is not authorised to view.

	  Only key attributes are listed here; key payloads are not included in
	  the resulting table.

	  If you are unsure as to whether this is required, answer N.

config SECURITY
	bool "Enable different security models"
	depends on SYSFS
	help
	  This allows you to choose different security modules to be
	  configured into your kernel.

	  If this option is not selected, the default Linux security
	  model will be used.

	  If you are unsure how to answer this question, answer N.

config SECURITY_NETWORK
	bool "Socket and Networking Security Hooks"
	depends on SECURITY
	help
	  This enables the socket and networking security hooks.
	  If enabled, a security module can use these hooks to
	  implement socket and networking access controls.
	  If you are unsure how to answer this question, answer N.

config SECURITY_NETWORK_XFRM
	bool "XFRM (IPSec) Networking Security Hooks"
	depends on XFRM && SECURITY_NETWORK
	help
	  This enables the XFRM (IPSec) networking security hooks.
	  If enabled, a security module can use these hooks to
	  implement per-packet access controls based on labels
	  derived from IPSec policy.  Non-IPSec communications are
	  designated as unlabelled, and only sockets authorized
	  to communicate unlabelled data can send without using
	  IPSec.
	  If you are unsure how to answer this question, answer N.

config SECURITY_CAPABILITIES
	tristate "Default Linux Capabilities"
	depends on SECURITY
	help
	  This enables the "default" Linux capabilities functionality.
	  If you are unsure how to answer this question, answer Y.

config SECURITY_ROOTPLUG
	tristate "Root Plug Support"
	depends on USB && SECURITY
	help
	  This is a sample LSM module that should only be used as such.
	  It prevents any programs running with egid == 0 if a specific
	  USB device is not present in the system.

	  See <http://www.linuxjournal.com/article.php?sid=6279> for
	  more information about this module.
	  
	  If you are unsure how to answer this question, answer N.

config SECURITY_SECLVL
	tristate "BSD Secure Levels"
	depends on SECURITY
	select CRYPTO
	select CRYPTO_SHA1
	help
	  Implements BSD Secure Levels as an LSM.  See
	  <file:Documentation/seclvl.txt> for instructions on how to use this
	  module.

	  If you are unsure how to answer this question, answer N.

source security/selinux/Kconfig

endmenu
Commit	Line	Data
1da177e4 LT	1	#
	2	# Security configuration
	3	#
	4
	5	menu "Security options"
	6
	7	config KEYS
	8	bool "Enable access key retention support"
	9	help
	10	This option provides support for retaining authentication tokens and
	11	access keys in the kernel.
	12
	13	It also includes provision of methods by which such keys might be
	14	associated with a process so that network filesystems, encryption
	15	support and the like can find them.
	16
	17	Furthermore, a special type of key is available that acts as keyring:
	18	a searchable sequence of keys. Each process is equipped with access
	19	to five standard keyrings: UID-specific, GID-specific, session,
	20	process and thread.
	21
	22	If you are unsure as to whether this is required, answer N.
	23
	24	config KEYS_DEBUG_PROC_KEYS
06ec7be5	25	bool "Enable the /proc/keys file by which keys may be viewed"
1da177e4 LT	26	depends on KEYS
1da177e4 LT	27	help
06ec7be5 ML	28	This option turns on support for the /proc/keys file - through which
	29	can be listed all the keys on the system that are viewable by the
	30	reading process.
1da177e4	31
06ec7be5 ML	32	The only keys included in the list are those that grant View
	33	permission to the reading process whether or not it possesses them.
	34	Note that LSM security checks are still performed, and may further
	35	filter out keys that the current process is not authorised to view.
	36
	37	Only key attributes are listed here; key payloads are not included in
	38	the resulting table.
	39
	40	If you are unsure as to whether this is required, answer N.
1da177e4 LT	41
	42	config SECURITY
	43	bool "Enable different security models"
2c40579b	44	depends on SYSFS
1da177e4 LT	45	help
	46	This allows you to choose different security modules to be
	47	configured into your kernel.
	48
	49	If this option is not selected, the default Linux security
	50	model will be used.
	51
	52	If you are unsure how to answer this question, answer N.
	53
	54	config SECURITY_NETWORK
	55	bool "Socket and Networking Security Hooks"
	56	depends on SECURITY
	57	help
	58	This enables the socket and networking security hooks.
	59	If enabled, a security module can use these hooks to
	60	implement socket and networking access controls.
	61	If you are unsure how to answer this question, answer N.
df71837d TJ	62
	63	config SECURITY_NETWORK_XFRM
	64	bool "XFRM (IPSec) Networking Security Hooks"
	65	depends on XFRM && SECURITY_NETWORK
	66	help
	67	This enables the XFRM (IPSec) networking security hooks.
	68	If enabled, a security module can use these hooks to
	69	implement per-packet access controls based on labels
	70	derived from IPSec policy. Non-IPSec communications are
	71	designated as unlabelled, and only sockets authorized
	72	to communicate unlabelled data can send without using
	73	IPSec.
	74	If you are unsure how to answer this question, answer N.
1da177e4 LT	75
	76	config SECURITY_CAPABILITIES
	77	tristate "Default Linux Capabilities"
	78	depends on SECURITY
	79	help
	80	This enables the "default" Linux capabilities functionality.
	81	If you are unsure how to answer this question, answer Y.
	82
	83	config SECURITY_ROOTPLUG
	84	tristate "Root Plug Support"
	85	depends on USB && SECURITY
	86	help
	87	This is a sample LSM module that should only be used as such.
	88	It prevents any programs running with egid == 0 if a specific
	89	USB device is not present in the system.
	90
	91	See <http://www.linuxjournal.com/article.php?sid=6279> for
	92	more information about this module.
	93
	94	If you are unsure how to answer this question, answer N.
	95
	96	config SECURITY_SECLVL
	97	tristate "BSD Secure Levels"
	98	depends on SECURITY
	99	select CRYPTO
	100	select CRYPTO_SHA1
	101	help
	102	Implements BSD Secure Levels as an LSM. See
	103	<file:Documentation/seclvl.txt> for instructions on how to use this
	104	module.
	105
	106	If you are unsure how to answer this question, answer N.
	107
	108	source security/selinux/Kconfig
	109
	110	endmenu
	111