[linux.git] / arch / arm / mach-at91 / board-csb637.c

/*
 * linux/arch/arm/mach-at91/board-csb637.c
 *
 *  Copyright (C) 2005 SAN People
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

#include <linux/types.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>

#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <asm/arch/board.h>
#include <asm/arch/gpio.h>

#include "generic.h"


/*
 * Serial port configuration.
 *    0 .. 3 = USART0 .. USART3
 *    4      = DBGU
 */
static struct at91_uart_config __initdata csb637_uart_config = {
	.console_tty	= 0,				/* ttyS0 */
	.nr_tty		= 2,
	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
};

static void __init csb637_map_io(void)
{
	/* Initialize processor: 3.6864 MHz crystal */
	at91rm9200_initialize(3686400, AT91RM9200_BGA);

	/* Setup the LEDs */
	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);

	/* Setup the serial ports and console */
	at91_init_serial(&csb637_uart_config);
}

static void __init csb637_init_irq(void)
{
	at91rm9200_init_interrupts(NULL);
}

static struct at91_eth_data __initdata csb637_eth_data = {
	.phy_irq_pin	= AT91_PIN_PC0,
	.is_rmii	= 0,
};

static struct at91_usbh_data __initdata csb637_usbh_data = {
	.ports		= 2,
};

static struct at91_udc_data __initdata csb637_udc_data = {
	.vbus_pin     = AT91_PIN_PB28,
	.pullup_pin   = AT91_PIN_PB1,
};

#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
#define CSB_FLASH_SIZE	0x1000000

static struct mtd_partition csb_flash_partitions[] = {
	{
		.name		= "uMON flash",
		.offset		= 0,
		.size		= MTDPART_SIZ_FULL,
		.mask_flags	= MTD_WRITEABLE,	/* read only */
	}
};

static struct physmap_flash_data csb_flash_data = {
	.width		= 2,
	.parts		= csb_flash_partitions,
	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
};

static struct resource csb_flash_resources[] = {
	{
		.start	= CSB_FLASH_BASE,
		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
		.flags	= IORESOURCE_MEM,
	}
};

static struct platform_device csb_flash = {
	.name		= "physmap-flash",
	.id		= 0,
	.dev		= {
				.platform_data = &csb_flash_data,
			},
	.resource	= csb_flash_resources,
	.num_resources	= ARRAY_SIZE(csb_flash_resources),
};

static void __init csb637_board_init(void)
{
	/* Serial */
	at91_add_device_serial();
	/* Ethernet */
	at91_add_device_eth(&csb637_eth_data);
	/* USB Host */
	at91_add_device_usbh(&csb637_usbh_data);
	/* USB Device */
	at91_add_device_udc(&csb637_udc_data);
	/* I2C */
	at91_add_device_i2c();
	/* SPI */
	at91_add_device_spi(NULL, 0);
	/* NOR flash */
	platform_device_register(&csb_flash);
}

MACHINE_START(CSB637, "Cogent CSB637")
	/* Maintainer: Bill Gatliff */
	.phys_io	= AT91_BASE_SYS,
	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
	.boot_params	= AT91_SDRAM_BASE + 0x100,
	.timer		= &at91rm9200_timer,
	.map_io		= csb637_map_io,
	.init_irq	= csb637_init_irq,
	.init_machine	= csb637_board_init,
MACHINE_END
Commit	Line	Data
49978db4	1	/*
9d041268	2	* linux/arch/arm/mach-at91/board-csb637.c
49978db4 AV	3	*
	4	* Copyright (C) 2005 SAN People
	5	*
	6	* This program is free software; you can redistribute it and/or modify
	7	* it under the terms of the GNU General Public License as published by
	8	* the Free Software Foundation; either version 2 of the License, or
	9	* (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	* GNU General Public License for more details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	19	*/
	20
49978db4 AV	21	#include <linux/types.h>
	22	#include <linux/init.h>
	23	#include <linux/mm.h>
	24	#include <linux/module.h>
	25	#include <linux/platform_device.h>
127a7ec6	26	#include <linux/mtd/physmap.h>
49978db4 AV	27
	28	#include <asm/hardware.h>
	29	#include <asm/setup.h>
	30	#include <asm/mach-types.h>
	31	#include <asm/irq.h>
	32
	33	#include <asm/mach/arch.h>
	34	#include <asm/mach/map.h>
	35	#include <asm/mach/irq.h>
	36
49978db4	37	#include <asm/arch/board.h>
466e6227	38	#include <asm/arch/gpio.h>
49978db4 AV	39
	40	#include "generic.h"
	41
49978db4 AV	42
	43	/*
	44	* Serial port configuration.
	45	* 0 .. 3 = USART0 .. USART3
	46	* 4 = DBGU
	47	*/
466e6227 AV	48	static struct at91_uart_config __initdata csb637_uart_config = {
	49	.console_tty = 0, /* ttyS0 */
	50	.nr_tty = 2,
	51	.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
	52	};
49978db4 AV	53
	54	static void __init csb637_map_io(void)
	55	{
2eeaaa21	56	/* Initialize processor: 3.6864 MHz crystal */
f2173834	57	at91rm9200_initialize(3686400, AT91RM9200_BGA);
49978db4	58
cc2832a1 AV	59	/* Setup the LEDs */
	60	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
	61
466e6227 AV	62	/* Setup the serial ports and console */
466e6227 AV	63	at91_init_serial(&csb637_uart_config);
49978db4 AV	64	}
49978db4 AV	65
f2173834 AV	66	static void __init csb637_init_irq(void)
	67	{
	68	at91rm9200_init_interrupts(NULL);
	69	}
	70
49978db4 AV	71	static struct at91_eth_data __initdata csb637_eth_data = {
	72	.phy_irq_pin = AT91_PIN_PC0,
	73	.is_rmii = 0,
	74	};
	75
	76	static struct at91_usbh_data __initdata csb637_usbh_data = {
	77	.ports = 2,
	78	};
	79
	80	static struct at91_udc_data __initdata csb637_udc_data = {
	81	.vbus_pin = AT91_PIN_PB28,
	82	.pullup_pin = AT91_PIN_PB1,
	83	};
	84
127a7ec6 AV	85	#define CSB_FLASH_BASE AT91_CHIPSELECT_0
	86	#define CSB_FLASH_SIZE 0x1000000
	87
	88	static struct mtd_partition csb_flash_partitions[] = {
	89	{
	90	.name = "uMON flash",
	91	.offset = 0,
	92	.size = MTDPART_SIZ_FULL,
	93	.mask_flags = MTD_WRITEABLE, /* read only */
	94	}
	95	};
	96
	97	static struct physmap_flash_data csb_flash_data = {
	98	.width = 2,
	99	.parts = csb_flash_partitions,
	100	.nr_parts = ARRAY_SIZE(csb_flash_partitions),
	101	};
	102
	103	static struct resource csb_flash_resources[] = {
	104	{
	105	.start = CSB_FLASH_BASE,
	106	.end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
	107	.flags = IORESOURCE_MEM,
	108	}
	109	};
	110
	111	static struct platform_device csb_flash = {
	112	.name = "physmap-flash",
	113	.id = 0,
	114	.dev = {
	115	.platform_data = &csb_flash_data,
	116	},
	117	.resource = csb_flash_resources,
	118	.num_resources = ARRAY_SIZE(csb_flash_resources),
	119	};
	120
49978db4 AV	121	static void __init csb637_board_init(void)
49978db4 AV	122	{
466e6227 AV	123	/* Serial */
466e6227 AV	124	at91_add_device_serial();
49978db4 AV	125	/* Ethernet */
	126	at91_add_device_eth(&csb637_eth_data);
	127	/* USB Host */
	128	at91_add_device_usbh(&csb637_usbh_data);
	129	/* USB Device */
	130	at91_add_device_udc(&csb637_udc_data);
466e6227 AV	131	/* I2C */
	132	at91_add_device_i2c();
	133	/* SPI */
	134	at91_add_device_spi(NULL, 0);
127a7ec6 AV	135	/* NOR flash */
127a7ec6 AV	136	platform_device_register(&csb_flash);
49978db4 AV	137	}
	138
	139	MACHINE_START(CSB637, "Cogent CSB637")
	140	/* Maintainer: Bill Gatliff */
49978db4 AV	141	.phys_io = AT91_BASE_SYS,
	142	.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
	143	.boot_params = AT91_SDRAM_BASE + 0x100,
	144	.timer = &at91rm9200_timer,
	145	.map_io = csb637_map_io,
	146	.init_irq = csb637_init_irq,
	147	.init_machine = csb637_board_init,
	148	MACHINE_END