[linux.git] / drivers / pci / vc.c

/*
 * PCI Virtual Channel support
 *
 * Copyright (C) 2013 Red Hat, Inc.  All rights reserved.
 *     Author: Alex Williamson <[email protected]>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/types.h>

/**
 * pci_vc_save_restore_dwords - Save or restore a series of dwords
 * @dev: device
 * @pos: starting config space position
 * @buf: buffer to save to or restore from
 * @dwords: number of dwords to save/restore
 * @save: whether to save or restore
 */
static void pci_vc_save_restore_dwords(struct pci_dev *dev, int pos,
				       u32 *buf, int dwords, bool save)
{
	int i;

	for (i = 0; i < dwords; i++, buf++) {
		if (save)
			pci_read_config_dword(dev, pos + (i * 4), buf);
		else
			pci_write_config_dword(dev, pos + (i * 4), *buf);
	}
}

/**
 * pci_vc_load_arb_table - load and wait for VC arbitration table
 * @dev: device
 * @pos: starting position of VC capability (VC/VC9/MFVC)
 *
 * Set Load VC Arbitration Table bit requesting hardware to apply the VC
 * Arbitration Table (previously loaded).  When the VC Arbitration Table
 * Status clears, hardware has latched the table into VC arbitration logic.
 */
static void pci_vc_load_arb_table(struct pci_dev *dev, int pos)
{
	u16 ctrl;

	pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL, &ctrl);
	pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
			      ctrl | PCI_VC_PORT_CTRL_LOAD_TABLE);
	if (pci_wait_for_pending(dev, pos + PCI_VC_PORT_STATUS,
				 PCI_VC_PORT_STATUS_TABLE))
		return;

	dev_err(&dev->dev, "VC arbitration table failed to load\n");
}

/**
 * pci_vc_load_port_arb_table - Load and wait for VC port arbitration table
 * @dev: device
 * @pos: starting position of VC capability (VC/VC9/MFVC)
 * @res: VC resource number, ie. VCn (0-7)
 *
 * Set Load Port Arbitration Table bit requesting hardware to apply the Port
 * Arbitration Table (previously loaded).  When the Port Arbitration Table
 * Status clears, hardware has latched the table into port arbitration logic.
 */
static void pci_vc_load_port_arb_table(struct pci_dev *dev, int pos, int res)
{
	int ctrl_pos, status_pos;
	u32 ctrl;

	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);

	pci_read_config_dword(dev, ctrl_pos, &ctrl);
	pci_write_config_dword(dev, ctrl_pos,
			       ctrl | PCI_VC_RES_CTRL_LOAD_TABLE);

	if (pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_TABLE))
		return;

	dev_err(&dev->dev, "VC%d port arbitration table failed to load\n", res);
}

/**
 * pci_vc_enable - Enable virtual channel
 * @dev: device
 * @pos: starting position of VC capability (VC/VC9/MFVC)
 * @res: VC res number, ie. VCn (0-7)
 *
 * A VC is enabled by setting the enable bit in matching resource control
 * registers on both sides of a link.  We therefore need to find the opposite
 * end of the link.  To keep this simple we enable from the downstream device.
 * RC devices do not have an upstream device, nor does it seem that VC9 do
 * (spec is unclear).  Once we find the upstream device, match the VC ID to
 * get the correct resource, disable and enable on both ends.
 */
static void pci_vc_enable(struct pci_dev *dev, int pos, int res)
{
	int ctrl_pos, status_pos, id, pos2, evcc, i, ctrl_pos2, status_pos2;
	u32 ctrl, header, cap1, ctrl2;
	struct pci_dev *link = NULL;

	/* Enable VCs from the downstream device */
	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
	    pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
		return;

	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);

	pci_read_config_dword(dev, ctrl_pos, &ctrl);
	id = ctrl & PCI_VC_RES_CTRL_ID;

	pci_read_config_dword(dev, pos, &header);

	/* If there is no opposite end of the link, skip to enable */
	if (PCI_EXT_CAP_ID(header) == PCI_EXT_CAP_ID_VC9 ||
	    pci_is_root_bus(dev->bus))
		goto enable;

	pos2 = pci_find_ext_capability(dev->bus->self, PCI_EXT_CAP_ID_VC);
	if (!pos2)
		goto enable;

	pci_read_config_dword(dev->bus->self, pos2 + PCI_VC_PORT_CAP1, &cap1);
	evcc = cap1 & PCI_VC_CAP1_EVCC;

	/* VC0 is hardwired enabled, so we can start with 1 */
	for (i = 1; i < evcc + 1; i++) {
		ctrl_pos2 = pos2 + PCI_VC_RES_CTRL +
				(i * PCI_CAP_VC_PER_VC_SIZEOF);
		status_pos2 = pos2 + PCI_VC_RES_STATUS +
				(i * PCI_CAP_VC_PER_VC_SIZEOF);
		pci_read_config_dword(dev->bus->self, ctrl_pos2, &ctrl2);
		if ((ctrl2 & PCI_VC_RES_CTRL_ID) == id) {
			link = dev->bus->self;
			break;
		}
	}

	if (!link)
		goto enable;

	/* Disable if enabled */
	if (ctrl2 & PCI_VC_RES_CTRL_ENABLE) {
		ctrl2 &= ~PCI_VC_RES_CTRL_ENABLE;
		pci_write_config_dword(link, ctrl_pos2, ctrl2);
	}

	/* Enable on both ends */
	ctrl2 |= PCI_VC_RES_CTRL_ENABLE;
	pci_write_config_dword(link, ctrl_pos2, ctrl2);
enable:
	ctrl |= PCI_VC_RES_CTRL_ENABLE;
	pci_write_config_dword(dev, ctrl_pos, ctrl);

	if (!pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_NEGO))
		dev_err(&dev->dev, "VC%d negotiation stuck pending\n", id);

	if (link && !pci_wait_for_pending(link, status_pos2,
					  PCI_VC_RES_STATUS_NEGO))
		dev_err(&link->dev, "VC%d negotiation stuck pending\n", id);
}

/**
 * pci_vc_do_save_buffer - Size, save, or restore VC state
 * @dev: device
 * @pos: starting position of VC capability (VC/VC9/MFVC)
 * @save_state: buffer for save/restore
 * @name: for error message
 * @save: if provided a buffer, this indicates what to do with it
 *
 * Walking Virtual Channel config space to size, save, or restore it
 * is complicated, so we do it all from one function to reduce code and
 * guarantee ordering matches in the buffer.  When called with NULL
 * @save_state, return the size of the necessary save buffer.  When called
 * with a non-NULL @save_state, @save determines whether we save to the
 * buffer or restore from it.
 */
static int pci_vc_do_save_buffer(struct pci_dev *dev, int pos,
				 struct pci_cap_saved_state *save_state,
				 bool save)
{
	u32 cap1;
	char evcc, lpevcc, parb_size;
	int i, len = 0;
	u8 *buf = save_state ? (u8 *)save_state->cap.data : NULL;

	/* Sanity check buffer size for save/restore */
	if (buf && save_state->cap.size !=
	    pci_vc_do_save_buffer(dev, pos, NULL, save)) {
		dev_err(&dev->dev,
			"VC save buffer size does not match @0x%x\n", pos);
		return -ENOMEM;
	}

	pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP1, &cap1);
	/* Extended VC Count (not counting VC0) */
	evcc = cap1 & PCI_VC_CAP1_EVCC;
	/* Low Priority Extended VC Count (not counting VC0) */
	lpevcc = (cap1 & PCI_VC_CAP1_LPEVCC) >> 4;
	/* Port Arbitration Table Entry Size (bits) */
	parb_size = 1 << ((cap1 & PCI_VC_CAP1_ARB_SIZE) >> 10);

	/*
	 * Port VC Control Register contains VC Arbitration Select, which
	 * cannot be modified when more than one LPVC is in operation.  We
	 * therefore save/restore it first, as only VC0 should be enabled
	 * after device reset.
	 */
	if (buf) {
		if (save)
			pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL,
					     (u16 *)buf);
		else
			pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
					      *(u16 *)buf);
		buf += 2;
	}
	len += 2;

	/*
	 * If we have any Low Priority VCs and a VC Arbitration Table Offset
	 * in Port VC Capability Register 2 then save/restore it next.
	 */
	if (lpevcc) {
		u32 cap2;
		int vcarb_offset;

		pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP2, &cap2);
		vcarb_offset = ((cap2 & PCI_VC_CAP2_ARB_OFF) >> 24) * 16;

		if (vcarb_offset) {
			int size, vcarb_phases = 0;

			if (cap2 & PCI_VC_CAP2_128_PHASE)
				vcarb_phases = 128;
			else if (cap2 & PCI_VC_CAP2_64_PHASE)
				vcarb_phases = 64;
			else if (cap2 & PCI_VC_CAP2_32_PHASE)
				vcarb_phases = 32;

			/* Fixed 4 bits per phase per lpevcc (plus VC0) */
			size = ((lpevcc + 1) * vcarb_phases * 4) / 8;

			if (size && buf) {
				pci_vc_save_restore_dwords(dev,
							   pos + vcarb_offset,
							   (u32 *)buf,
							   size / 4, save);
				/*
				 * On restore, we need to signal hardware to
				 * re-load the VC Arbitration Table.
				 */
				if (!save)
					pci_vc_load_arb_table(dev, pos);

				buf += size;
			}
			len += size;
		}
	}

	/*
	 * In addition to each VC Resource Control Register, we may have a
	 * Port Arbitration Table attached to each VC.  The Port Arbitration
	 * Table Offset in each VC Resource Capability Register tells us if
	 * it exists.  The entry size is global from the Port VC Capability
	 * Register1 above.  The number of phases is determined per VC.
	 */
	for (i = 0; i < evcc + 1; i++) {
		u32 cap;
		int parb_offset;

		pci_read_config_dword(dev, pos + PCI_VC_RES_CAP +
				      (i * PCI_CAP_VC_PER_VC_SIZEOF), &cap);
		parb_offset = ((cap & PCI_VC_RES_CAP_ARB_OFF) >> 24) * 16;
		if (parb_offset) {
			int size, parb_phases = 0;

			if (cap & PCI_VC_RES_CAP_256_PHASE)
				parb_phases = 256;
			else if (cap & (PCI_VC_RES_CAP_128_PHASE |
					PCI_VC_RES_CAP_128_PHASE_TB))
				parb_phases = 128;
			else if (cap & PCI_VC_RES_CAP_64_PHASE)
				parb_phases = 64;
			else if (cap & PCI_VC_RES_CAP_32_PHASE)
				parb_phases = 32;

			size = (parb_size * parb_phases) / 8;

			if (size && buf) {
				pci_vc_save_restore_dwords(dev,
							   pos + parb_offset,
							   (u32 *)buf,
							   size / 4, save);
				buf += size;
			}
			len += size;
		}

		/* VC Resource Control Register */
		if (buf) {
			int ctrl_pos = pos + PCI_VC_RES_CTRL +
						(i * PCI_CAP_VC_PER_VC_SIZEOF);
			if (save)
				pci_read_config_dword(dev, ctrl_pos,
						      (u32 *)buf);
			else {
				u32 tmp, ctrl = *(u32 *)buf;
				/*
				 * For an FLR case, the VC config may remain.
				 * Preserve enable bit, restore the rest.
				 */
				pci_read_config_dword(dev, ctrl_pos, &tmp);
				tmp &= PCI_VC_RES_CTRL_ENABLE;
				tmp |= ctrl & ~PCI_VC_RES_CTRL_ENABLE;
				pci_write_config_dword(dev, ctrl_pos, tmp);
				/* Load port arbitration table if used */
				if (ctrl & PCI_VC_RES_CTRL_ARB_SELECT)
					pci_vc_load_port_arb_table(dev, pos, i);
				/* Re-enable if needed */
				if ((ctrl ^ tmp) & PCI_VC_RES_CTRL_ENABLE)
					pci_vc_enable(dev, pos, i);
			}
			buf += 4;
		}
		len += 4;
	}

	return buf ? 0 : len;
}

static struct {
	u16 id;
	const char *name;
} vc_caps[] = { { PCI_EXT_CAP_ID_MFVC, "MFVC" },
		{ PCI_EXT_CAP_ID_VC, "VC" },
		{ PCI_EXT_CAP_ID_VC9, "VC9" } };

/**
 * pci_save_vc_state - Save VC state to pre-allocate save buffer
 * @dev: device
 *
 * For each type of VC capability, VC/VC9/MFVC, find the capability and
 * save it to the pre-allocated save buffer.
 */
int pci_save_vc_state(struct pci_dev *dev)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
		int pos, ret;
		struct pci_cap_saved_state *save_state;

		pos = pci_find_ext_capability(dev, vc_caps[i].id);
		if (!pos)
			continue;

		save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
		if (!save_state) {
			dev_err(&dev->dev, "%s buffer not found in %s\n",
				vc_caps[i].name, __func__);
			return -ENOMEM;
		}

		ret = pci_vc_do_save_buffer(dev, pos, save_state, true);
		if (ret) {
			dev_err(&dev->dev, "%s save unsuccessful %s\n",
				vc_caps[i].name, __func__);
			return ret;
		}
	}

	return 0;
}

/**
 * pci_restore_vc_state - Restore VC state from save buffer
 * @dev: device
 *
 * For each type of VC capability, VC/VC9/MFVC, find the capability and
 * restore it from the previously saved buffer.
 */
void pci_restore_vc_state(struct pci_dev *dev)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
		int pos;
		struct pci_cap_saved_state *save_state;

		pos = pci_find_ext_capability(dev, vc_caps[i].id);
		save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
		if (!save_state || !pos)
			continue;

		pci_vc_do_save_buffer(dev, pos, save_state, false);
	}
}

/**
 * pci_allocate_vc_save_buffers - Allocate save buffers for VC caps
 * @dev: device
 *
 * For each type of VC capability, VC/VC9/MFVC, find the capability, size
 * it, and allocate a buffer for save/restore.
 */

void pci_allocate_vc_save_buffers(struct pci_dev *dev)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
		int len, pos = pci_find_ext_capability(dev, vc_caps[i].id);

		if (!pos)
			continue;

		len = pci_vc_do_save_buffer(dev, pos, NULL, false);
		if (pci_add_ext_cap_save_buffer(dev, vc_caps[i].id, len))
			dev_err(&dev->dev,
				"unable to preallocate %s save buffer\n",
				vc_caps[i].name);
	}
}
Commit	Line	Data
425c1b22 AW	1	/*
	2	* PCI Virtual Channel support
	3	*
	4	* Copyright (C) 2013 Red Hat, Inc. All rights reserved.
	5	* Author: Alex Williamson <[email protected]>
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License version 2 as
	9	* published by the Free Software Foundation.
	10	*/
	11
	12	#include <linux/device.h>
	13	#include <linux/kernel.h>
	14	#include <linux/module.h>
	15	#include <linux/pci.h>
	16	#include <linux/pci_regs.h>
	17	#include <linux/types.h>
	18
	19	/**
	20	* pci_vc_save_restore_dwords - Save or restore a series of dwords
	21	* @dev: device
	22	* @pos: starting config space position
	23	* @buf: buffer to save to or restore from
	24	* @dwords: number of dwords to save/restore
	25	* @save: whether to save or restore
	26	*/
	27	static void pci_vc_save_restore_dwords(struct pci_dev *dev, int pos,
	28	u32 *buf, int dwords, bool save)
	29	{
	30	int i;
	31
	32	for (i = 0; i < dwords; i++, buf++) {
	33	if (save)
	34	pci_read_config_dword(dev, pos + (i * 4), buf);
	35	else
	36	pci_write_config_dword(dev, pos + (i * 4), *buf);
	37	}
	38	}
	39
	40	/**
	41	* pci_vc_load_arb_table - load and wait for VC arbitration table
	42	* @dev: device
	43	* @pos: starting position of VC capability (VC/VC9/MFVC)
	44	*
	45	* Set Load VC Arbitration Table bit requesting hardware to apply the VC
	46	* Arbitration Table (previously loaded). When the VC Arbitration Table
	47	* Status clears, hardware has latched the table into VC arbitration logic.
	48	*/
	49	static void pci_vc_load_arb_table(struct pci_dev *dev, int pos)
	50	{
	51	u16 ctrl;
	52
	53	pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL, &ctrl);
	54	pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
	55	ctrl \| PCI_VC_PORT_CTRL_LOAD_TABLE);
	56	if (pci_wait_for_pending(dev, pos + PCI_VC_PORT_STATUS,
	57	PCI_VC_PORT_STATUS_TABLE))
	58	return;
	59
	60	dev_err(&dev->dev, "VC arbitration table failed to load\n");
	61	}
	62
	63	/**
	64	* pci_vc_load_port_arb_table - Load and wait for VC port arbitration table
65	* @dev: device
66	* @pos: starting position of VC capability (VC/VC9/MFVC)
67	* @res: VC resource number, ie. VCn (0-7)
68	*
69	* Set Load Port Arbitration Table bit requesting hardware to apply the Port
70	* Arbitration Table (previously loaded). When the Port Arbitration Table
71	* Status clears, hardware has latched the table into port arbitration logic.
72	*/
73	static void pci_vc_load_port_arb_table(struct pci_dev *dev, int pos, int res)
74	{
75	int ctrl_pos, status_pos;
76	u32 ctrl;
77
78	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
79	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
80
81	pci_read_config_dword(dev, ctrl_pos, &ctrl);
82	pci_write_config_dword(dev, ctrl_pos,
83	ctrl \| PCI_VC_RES_CTRL_LOAD_TABLE);
84
85	if (pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_TABLE))
86	return;
87
88	dev_err(&dev->dev, "VC%d port arbitration table failed to load\n", res);
89	}
90
91	/**
92	* pci_vc_enable - Enable virtual channel
93	* @dev: device
94	* @pos: starting position of VC capability (VC/VC9/MFVC)
95	* @res: VC res number, ie. VCn (0-7)
96	*
97	* A VC is enabled by setting the enable bit in matching resource control
98	* registers on both sides of a link. We therefore need to find the opposite
99	* end of the link. To keep this simple we enable from the downstream device.
100	* RC devices do not have an upstream device, nor does it seem that VC9 do
101	* (spec is unclear). Once we find the upstream device, match the VC ID to
102	* get the correct resource, disable and enable on both ends.
103	*/
104	static void pci_vc_enable(struct pci_dev *dev, int pos, int res)
105	{
106	int ctrl_pos, status_pos, id, pos2, evcc, i, ctrl_pos2, status_pos2;
274127a1	107	u32 ctrl, header, cap1, ctrl2;
425c1b22 AW	108	struct pci_dev *link = NULL;
	109
	110	/* Enable VCs from the downstream device */
	111	if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT \|\|
	112	pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
	113	return;
	114
	115	ctrl_pos = pos + PCI_VC_RES_CTRL + (res * PCI_CAP_VC_PER_VC_SIZEOF);
	116	status_pos = pos + PCI_VC_RES_STATUS + (res * PCI_CAP_VC_PER_VC_SIZEOF);
	117
	118	pci_read_config_dword(dev, ctrl_pos, &ctrl);
	119	id = ctrl & PCI_VC_RES_CTRL_ID;
	120
	121	pci_read_config_dword(dev, pos, &header);
	122
	123	/* If there is no opposite end of the link, skip to enable */
	124	if (PCI_EXT_CAP_ID(header) == PCI_EXT_CAP_ID_VC9 \|\|
	125	pci_is_root_bus(dev->bus))
	126	goto enable;
	127
	128	pos2 = pci_find_ext_capability(dev->bus->self, PCI_EXT_CAP_ID_VC);
	129	if (!pos2)
	130	goto enable;
	131
274127a1 AW	132	pci_read_config_dword(dev->bus->self, pos2 + PCI_VC_PORT_CAP1, &cap1);
274127a1 AW	133	evcc = cap1 & PCI_VC_CAP1_EVCC;
425c1b22 AW	134
	135	/* VC0 is hardwired enabled, so we can start with 1 */
	136	for (i = 1; i < evcc + 1; i++) {
	137	ctrl_pos2 = pos2 + PCI_VC_RES_CTRL +
	138	(i * PCI_CAP_VC_PER_VC_SIZEOF);
	139	status_pos2 = pos2 + PCI_VC_RES_STATUS +
	140	(i * PCI_CAP_VC_PER_VC_SIZEOF);
	141	pci_read_config_dword(dev->bus->self, ctrl_pos2, &ctrl2);
	142	if ((ctrl2 & PCI_VC_RES_CTRL_ID) == id) {
	143	link = dev->bus->self;
	144	break;
	145	}
	146	}
	147
	148	if (!link)
	149	goto enable;
	150
	151	/* Disable if enabled */
	152	if (ctrl2 & PCI_VC_RES_CTRL_ENABLE) {
	153	ctrl2 &= ~PCI_VC_RES_CTRL_ENABLE;
	154	pci_write_config_dword(link, ctrl_pos2, ctrl2);
	155	}
	156
	157	/* Enable on both ends */
	158	ctrl2 \|= PCI_VC_RES_CTRL_ENABLE;
	159	pci_write_config_dword(link, ctrl_pos2, ctrl2);
	160	enable:
	161	ctrl \|= PCI_VC_RES_CTRL_ENABLE;
	162	pci_write_config_dword(dev, ctrl_pos, ctrl);
	163
	164	if (!pci_wait_for_pending(dev, status_pos, PCI_VC_RES_STATUS_NEGO))
	165	dev_err(&dev->dev, "VC%d negotiation stuck pending\n", id);
	166
	167	if (link && !pci_wait_for_pending(link, status_pos2,
	168	PCI_VC_RES_STATUS_NEGO))
	169	dev_err(&link->dev, "VC%d negotiation stuck pending\n", id);
	170	}
	171
	172	/**
	173	* pci_vc_do_save_buffer - Size, save, or restore VC state
	174	* @dev: device
	175	* @pos: starting position of VC capability (VC/VC9/MFVC)
	176	* @save_state: buffer for save/restore
	177	* @name: for error message
	178	* @save: if provided a buffer, this indicates what to do with it
	179	*
	180	* Walking Virtual Channel config space to size, save, or restore it
	181	* is complicated, so we do it all from one function to reduce code and
	182	* guarantee ordering matches in the buffer. When called with NULL
	183	* @save_state, return the size of the necessary save buffer. When called
	184	* with a non-NULL @save_state, @save determines whether we save to the
	185	* buffer or restore from it.
	186	*/
	187	static int pci_vc_do_save_buffer(struct pci_dev *dev, int pos,
	188	struct pci_cap_saved_state *save_state,
	189	bool save)
	190	{
274127a1	191	u32 cap1;
425c1b22 AW	192	char evcc, lpevcc, parb_size;
	193	int i, len = 0;
	194	u8 buf = save_state ? (u8 )save_state->cap.data : NULL;
	195
	196	/* Sanity check buffer size for save/restore */
	197	if (buf && save_state->cap.size !=
	198	pci_vc_do_save_buffer(dev, pos, NULL, save)) {
	199	dev_err(&dev->dev,
	200	"VC save buffer size does not match @0x%x\n", pos);
	201	return -ENOMEM;
	202	}
	203
274127a1	204	pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP1, &cap1);
425c1b22	205	/* Extended VC Count (not counting VC0) */
274127a1	206	evcc = cap1 & PCI_VC_CAP1_EVCC;
425c1b22	207	/* Low Priority Extended VC Count (not counting VC0) */
274127a1	208	lpevcc = (cap1 & PCI_VC_CAP1_LPEVCC) >> 4;
425c1b22	209	/* Port Arbitration Table Entry Size (bits) */
274127a1	210	parb_size = 1 << ((cap1 & PCI_VC_CAP1_ARB_SIZE) >> 10);
425c1b22 AW	211
	212	/*
	213	* Port VC Control Register contains VC Arbitration Select, which
	214	* cannot be modified when more than one LPVC is in operation. We
	215	* therefore save/restore it first, as only VC0 should be enabled
	216	* after device reset.
	217	*/
	218	if (buf) {
	219	if (save)
	220	pci_read_config_word(dev, pos + PCI_VC_PORT_CTRL,
	221	(u16 *)buf);
	222	else
	223	pci_write_config_word(dev, pos + PCI_VC_PORT_CTRL,
	224	(u16 )buf);
	225	buf += 2;
	226	}
	227	len += 2;
	228
	229	/*
	230	* If we have any Low Priority VCs and a VC Arbitration Table Offset
	231	* in Port VC Capability Register 2 then save/restore it next.
	232	*/
	233	if (lpevcc) {
274127a1	234	u32 cap2;
425c1b22 AW	235	int vcarb_offset;
425c1b22 AW	236
274127a1 AW	237	pci_read_config_dword(dev, pos + PCI_VC_PORT_CAP2, &cap2);
274127a1 AW	238	vcarb_offset = ((cap2 & PCI_VC_CAP2_ARB_OFF) >> 24) * 16;
425c1b22 AW	239
	240	if (vcarb_offset) {
	241	int size, vcarb_phases = 0;
	242
274127a1	243	if (cap2 & PCI_VC_CAP2_128_PHASE)
425c1b22	244	vcarb_phases = 128;
274127a1	245	else if (cap2 & PCI_VC_CAP2_64_PHASE)
425c1b22	246	vcarb_phases = 64;
274127a1	247	else if (cap2 & PCI_VC_CAP2_32_PHASE)
425c1b22 AW	248	vcarb_phases = 32;
	249
	250	/* Fixed 4 bits per phase per lpevcc (plus VC0) */
	251	size = ((lpevcc + 1) * vcarb_phases * 4) / 8;
	252
	253	if (size && buf) {
	254	pci_vc_save_restore_dwords(dev,
	255	pos + vcarb_offset,
	256	(u32 *)buf,
	257	size / 4, save);
	258	/*
	259	* On restore, we need to signal hardware to
	260	* re-load the VC Arbitration Table.
	261	*/
	262	if (!save)
	263	pci_vc_load_arb_table(dev, pos);
	264
	265	buf += size;
	266	}
	267	len += size;
	268	}
	269	}
	270
	271	/*
	272	* In addition to each VC Resource Control Register, we may have a
	273	* Port Arbitration Table attached to each VC. The Port Arbitration
	274	* Table Offset in each VC Resource Capability Register tells us if
	275	* it exists. The entry size is global from the Port VC Capability
	276	* Register1 above. The number of phases is determined per VC.
	277	*/
	278	for (i = 0; i < evcc + 1; i++) {
	279	u32 cap;
	280	int parb_offset;
	281
	282	pci_read_config_dword(dev, pos + PCI_VC_RES_CAP +
	283	(i * PCI_CAP_VC_PER_VC_SIZEOF), &cap);
	284	parb_offset = ((cap & PCI_VC_RES_CAP_ARB_OFF) >> 24) * 16;
	285	if (parb_offset) {
	286	int size, parb_phases = 0;
	287
	288	if (cap & PCI_VC_RES_CAP_256_PHASE)
	289	parb_phases = 256;
	290	else if (cap & (PCI_VC_RES_CAP_128_PHASE \|
	291	PCI_VC_RES_CAP_128_PHASE_TB))
	292	parb_phases = 128;
	293	else if (cap & PCI_VC_RES_CAP_64_PHASE)
	294	parb_phases = 64;
	295	else if (cap & PCI_VC_RES_CAP_32_PHASE)
	296	parb_phases = 32;
	297
	298	size = (parb_size * parb_phases) / 8;
	299
	300	if (size && buf) {
	301	pci_vc_save_restore_dwords(dev,
	302	pos + parb_offset,
	303	(u32 *)buf,
	304	size / 4, save);
	305	buf += size;
	306	}
	307	len += size;
	308	}
	309
	310	/* VC Resource Control Register */
	311	if (buf) {
312	int ctrl_pos = pos + PCI_VC_RES_CTRL +
313	(i * PCI_CAP_VC_PER_VC_SIZEOF);
314	if (save)
315	pci_read_config_dword(dev, ctrl_pos,
316	(u32 *)buf);
317	else {
318	u32 tmp, ctrl = (u32 )buf;
319	/*
320	* For an FLR case, the VC config may remain.
321	* Preserve enable bit, restore the rest.
322	*/
323	pci_read_config_dword(dev, ctrl_pos, &tmp);
324	tmp &= PCI_VC_RES_CTRL_ENABLE;
325	tmp \|= ctrl & ~PCI_VC_RES_CTRL_ENABLE;
326	pci_write_config_dword(dev, ctrl_pos, tmp);
327	/* Load port arbitration table if used */
328	if (ctrl & PCI_VC_RES_CTRL_ARB_SELECT)
329	pci_vc_load_port_arb_table(dev, pos, i);
330	/* Re-enable if needed */
331	if ((ctrl ^ tmp) & PCI_VC_RES_CTRL_ENABLE)
332	pci_vc_enable(dev, pos, i);
333	}
334	buf += 4;
335	}
336	len += 4;
337	}
338
339	return buf ? 0 : len;
340	}
341
342	static struct {
343	u16 id;
344	const char *name;
345	} vc_caps[] = { { PCI_EXT_CAP_ID_MFVC, "MFVC" },
346	{ PCI_EXT_CAP_ID_VC, "VC" },
347	{ PCI_EXT_CAP_ID_VC9, "VC9" } };
348
349	/**
350	* pci_save_vc_state - Save VC state to pre-allocate save buffer
351	* @dev: device
352	*
353	* For each type of VC capability, VC/VC9/MFVC, find the capability and
354	* save it to the pre-allocated save buffer.
355	*/
356	int pci_save_vc_state(struct pci_dev *dev)
357	{
358	int i;
359
360	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
361	int pos, ret;
362	struct pci_cap_saved_state *save_state;
363
364	pos = pci_find_ext_capability(dev, vc_caps[i].id);
365	if (!pos)
366	continue;
367
368	save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
369	if (!save_state) {
370	dev_err(&dev->dev, "%s buffer not found in %s\n",
371	vc_caps[i].name, __func__);
372	return -ENOMEM;
373	}
374
375	ret = pci_vc_do_save_buffer(dev, pos, save_state, true);
376	if (ret) {
377	dev_err(&dev->dev, "%s save unsuccessful %s\n",
378	vc_caps[i].name, __func__);
379	return ret;
380	}
381	}
382
383	return 0;
384	}
385
386	/**
387	* pci_restore_vc_state - Restore VC state from save buffer
388	* @dev: device
389	*
390	* For each type of VC capability, VC/VC9/MFVC, find the capability and
391	* restore it from the previously saved buffer.
392	*/
393	void pci_restore_vc_state(struct pci_dev *dev)
394	{
395	int i;
396
397	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
398	int pos;
399	struct pci_cap_saved_state *save_state;
400
401	pos = pci_find_ext_capability(dev, vc_caps[i].id);
402	save_state = pci_find_saved_ext_cap(dev, vc_caps[i].id);
403	if (!save_state \|\| !pos)
404	continue;
405
406	pci_vc_do_save_buffer(dev, pos, save_state, false);
407	}
408	}
409
410	/**
411	* pci_allocate_vc_save_buffers - Allocate save buffers for VC caps
412	* @dev: device
413	*
414	* For each type of VC capability, VC/VC9/MFVC, find the capability, size
415	* it, and allocate a buffer for save/restore.
416	*/
417
418	void pci_allocate_vc_save_buffers(struct pci_dev *dev)
419	{
420	int i;
421
422	for (i = 0; i < ARRAY_SIZE(vc_caps); i++) {
423	int len, pos = pci_find_ext_capability(dev, vc_caps[i].id);
424
425	if (!pos)
426	continue;
427
428	len = pci_vc_do_save_buffer(dev, pos, NULL, false);
429	if (pci_add_ext_cap_save_buffer(dev, vc_caps[i].id, len))
430	dev_err(&dev->dev,
431	"unable to preallocate %s save buffer\n",
432	vc_caps[i].name);
433	}
434	}