]>
Commit | Line | Data |
---|---|---|
a9c5fff5 | 1 | # |
926b1e2c | 2 | # platform-neutral GPIO infrastructure and expanders |
a9c5fff5 DB |
3 | # |
4 | ||
7444a72e | 5 | config ARCH_WANT_OPTIONAL_GPIOLIB |
a9c5fff5 | 6 | bool |
7444a72e MB |
7 | help |
8 | Select this config option from the architecture Kconfig, if | |
9 | it is possible to use gpiolib on the architecture, but let the | |
10 | user decide whether to actually build it or not. | |
11 | Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does | |
12 | not depend on GPIOs being available, but rather let the user | |
13 | decide whether he needs it or not. | |
14 | ||
15 | config ARCH_REQUIRE_GPIOLIB | |
16 | bool | |
17 | select GPIOLIB | |
a9c5fff5 DB |
18 | help |
19 | Platforms select gpiolib if they use this infrastructure | |
20 | for all their GPIOs, usually starting with ones integrated | |
21 | into SOC processors. | |
7444a72e MB |
22 | Selecting this from the architecture code will cause the gpiolib |
23 | code to always get built in. | |
24 | ||
25 | ||
26 | ||
27 | menuconfig GPIOLIB | |
28 | bool "GPIO Support" | |
29 | depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB | |
30 | select GENERIC_GPIO | |
31 | help | |
32 | This enables GPIO support through the generic GPIO library. | |
33 | You only need to enable this, if you also want to enable | |
34 | one or more of the GPIO expansion card drivers below. | |
35 | ||
36 | If unsure, say N. | |
a9c5fff5 | 37 | |
7444a72e | 38 | if GPIOLIB |
a9c5fff5 DB |
39 | |
40 | config DEBUG_GPIO | |
41 | bool "Debug GPIO calls" | |
42 | depends on DEBUG_KERNEL | |
43 | help | |
44 | Say Y here to add some extra checks and diagnostics to GPIO calls. | |
692105b8 ML |
45 | These checks help ensure that GPIOs have been properly initialized |
46 | before they are used, and that sleeping calls are not made from | |
47 | non-sleeping contexts. They can make bitbanged serial protocols | |
a9c5fff5 DB |
48 | slower. The diagnostics help catch the type of setup errors |
49 | that are most common when setting up new platforms or boards. | |
50 | ||
d8f388d8 DB |
51 | config GPIO_SYSFS |
52 | bool "/sys/class/gpio/... (sysfs interface)" | |
53 | depends on SYSFS && EXPERIMENTAL | |
54 | help | |
55 | Say Y here to add a sysfs interface for GPIOs. | |
56 | ||
57 | This is mostly useful to work around omissions in a system's | |
58 | kernel support. Those are common in custom and semicustom | |
59 | hardware assembled using standard kernels with a minimum of | |
60 | custom patches. In those cases, userspace code may import | |
61 | a given GPIO from the kernel, if no kernel driver requested it. | |
62 | ||
63 | Kernel drivers may also request that a particular GPIO be | |
64 | exported to userspace; this can be useful when debugging. | |
65 | ||
a9c5fff5 DB |
66 | # put expanders in the right section, in alphabetical order |
67 | ||
e952805d WS |
68 | config GPIO_MAX730X |
69 | tristate | |
70 | ||
0bcb6069 JL |
71 | comment "Memory mapped GPIO expanders:" |
72 | ||
aeec56e3 AV |
73 | config GPIO_BASIC_MMIO |
74 | tristate "Basic memory-mapped GPIO controllers support" | |
75 | help | |
76 | Say yes here to support basic memory-mapped GPIO controllers. | |
77 | ||
9cc0cb3c DT |
78 | config GPIO_IT8761E |
79 | tristate "IT8761E GPIO support" | |
80 | depends on GPIOLIB | |
81 | help | |
82 | Say yes here to support GPIO functionality of IT8761E super I/O chip. | |
83 | ||
1e9c2859 BS |
84 | config GPIO_PL061 |
85 | bool "PrimeCell PL061 GPIO support" | |
86 | depends on ARM_AMBA | |
87 | help | |
88 | Say yes here to support the PrimeCell PL061 GPIO device | |
89 | ||
0bcb6069 JL |
90 | config GPIO_XILINX |
91 | bool "Xilinx GPIO support" | |
6fa612b5 | 92 | depends on PPC_OF || MICROBLAZE |
0bcb6069 JL |
93 | help |
94 | Say yes here to support the Xilinx FPGA GPIO device | |
95 | ||
27fdd325 YY |
96 | config GPIO_VR41XX |
97 | tristate "NEC VR4100 series General-purpose I/O Uint support" | |
98 | depends on CPU_VR41XX | |
99 | help | |
100 | Say yes here to support the NEC VR4100 series General-purpose I/O Uint | |
101 | ||
be9b06b2 DT |
102 | config GPIO_SCH |
103 | tristate "Intel SCH GPIO" | |
860fb8c1 RD |
104 | depends on GPIOLIB && PCI |
105 | select MFD_CORE | |
be9b06b2 DT |
106 | select LPC_SCH |
107 | help | |
108 | Say yes here to support GPIO interface on Intel Poulsbo SCH. | |
109 | The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are | |
110 | powered by the core power rail and are turned off during sleep | |
111 | modes (S3 and higher). The remaining four GPIOs are powered by | |
112 | the Intel SCH suspend power supply. These GPIOs remain | |
113 | active during S3. The suspend powered GPIOs can be used to wake the | |
114 | system from the Suspend-to-RAM state. | |
115 | ||
116 | This driver can also be built as a module. If so, the module | |
117 | will be called sch-gpio. | |
118 | ||
99ea2626 DD |
119 | config GPIO_VX855 |
120 | tristate "VIA VX855/VX875 GPIO" | |
121 | depends on GPIOLIB | |
122 | select MFD_CORE | |
123 | select MFD_VX855 | |
124 | help | |
125 | Support access to the VX855/VX875 GPIO lines through the gpio library. | |
126 | ||
127 | This driver provides common support for accessing the device, | |
128 | additional drivers must be enabled in order to use the | |
129 | functionality of the device. | |
130 | ||
a9c5fff5 DB |
131 | comment "I2C GPIO expanders:" |
132 | ||
e952805d WS |
133 | config GPIO_MAX7300 |
134 | tristate "Maxim MAX7300 GPIO expander" | |
135 | depends on I2C | |
136 | select GPIO_MAX730X | |
137 | help | |
138 | GPIO driver for Maxim MAX7301 I2C-based GPIO expander. | |
139 | ||
bbcd6d54 EM |
140 | config GPIO_MAX732X |
141 | tristate "MAX7319, MAX7320-7327 I2C Port Expanders" | |
142 | depends on I2C | |
143 | help | |
144 | Say yes here to support the MAX7319, MAX7320-7327 series of I2C | |
145 | Port Expanders. Each IO port on these chips has a fixed role of | |
146 | Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain | |
147 | Input and Output (designed by 'P'). The combinations are listed | |
148 | below: | |
149 | ||
150 | 8 bits: max7319 (8I), max7320 (8O), max7321 (8P), | |
151 | max7322 (4I4O), max7323 (4P4O) | |
152 | ||
153 | 16 bits: max7324 (8I8O), max7325 (8P8O), | |
154 | max7326 (4I12O), max7327 (4P12O) | |
155 | ||
156 | Board setup code must specify the model to use, and the start | |
157 | number for these GPIOs. | |
158 | ||
a80a0bbe MZ |
159 | config GPIO_MAX732X_IRQ |
160 | bool "Interrupt controller support for MAX732x" | |
161 | depends on GPIO_MAX732X=y && GENERIC_HARDIRQS | |
162 | help | |
163 | Say yes here to enable the max732x to be used as an interrupt | |
164 | controller. It requires the driver to be built in the kernel. | |
165 | ||
f3dc3630 | 166 | config GPIO_PCA953X |
ab5dc372 | 167 | tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports" |
9e60fdcf | 168 | depends on I2C |
169 | help | |
7059d4b0 DB |
170 | Say yes here to provide access to several register-oriented |
171 | SMBus I/O expanders, made mostly by NXP or TI. Compatible | |
172 | models include: | |
173 | ||
174 | 4 bits: pca9536, pca9537 | |
175 | ||
ab5dc372 DB |
176 | 8 bits: max7310, pca9534, pca9538, pca9554, pca9557, |
177 | tca6408 | |
7059d4b0 | 178 | |
ab5dc372 | 179 | 16 bits: pca9535, pca9539, pca9555, tca6416 |
9e60fdcf | 180 | |
181 | This driver can also be built as a module. If so, the module | |
f3dc3630 | 182 | will be called pca953x. |
9e60fdcf | 183 | |
89ea8bbe MZ |
184 | config GPIO_PCA953X_IRQ |
185 | bool "Interrupt controller support for PCA953x" | |
186 | depends on GPIO_PCA953X=y | |
187 | help | |
188 | Say yes here to enable the pca953x to be used as an interrupt | |
189 | controller. It requires the driver to be built in the kernel. | |
190 | ||
15fae37d | 191 | config GPIO_PCF857X |
1673ad52 | 192 | tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" |
15fae37d DB |
193 | depends on I2C |
194 | help | |
195 | Say yes here to provide access to most "quasi-bidirectional" I2C | |
196 | GPIO expanders used for additional digital outputs or inputs. | |
197 | Most of these parts are from NXP, though TI is a second source for | |
198 | some of them. Compatible models include: | |
199 | ||
200 | 8 bits: pcf8574, pcf8574a, pca8574, pca8574a, | |
1673ad52 DB |
201 | pca9670, pca9672, pca9674, pca9674a, |
202 | max7328, max7329 | |
15fae37d DB |
203 | |
204 | 16 bits: pcf8575, pcf8575c, pca8575, | |
205 | pca9671, pca9673, pca9675 | |
206 | ||
207 | Your board setup code will need to declare the expanders in | |
208 | use, and assign numbers to the GPIOs they expose. Those GPIOs | |
209 | can then be used from drivers and other kernel code, just like | |
210 | other GPIOs, but only accessible from task contexts. | |
211 | ||
212 | This driver provides an in-kernel interface to those GPIOs using | |
213 | platform-neutral GPIO calls. | |
214 | ||
c34f16b7 GB |
215 | config GPIO_SX150X |
216 | bool "Semtech SX150x I2C GPIO expander" | |
217 | depends on I2C=y | |
218 | default n | |
219 | help | |
220 | Say yes here to provide support for Semtech SX150-series I2C | |
221 | GPIO expanders. Compatible models include: | |
222 | ||
223 | 8 bits: sx1508q | |
224 | 16 bits: sx1509q | |
225 | ||
03f822f5 RV |
226 | config GPIO_STMPE |
227 | bool "STMPE GPIOs" | |
228 | depends on MFD_STMPE | |
229 | help | |
230 | This enables support for the GPIOs found on the STMPE I/O | |
231 | Expanders. | |
232 | ||
d88b25be RV |
233 | config GPIO_TC35892 |
234 | bool "TC35892 GPIOs" | |
235 | depends on MFD_TC35892 | |
236 | help | |
237 | This enables support for the GPIOs found on the TC35892 | |
238 | I/O Expander. | |
239 | ||
e9d35947 DB |
240 | config GPIO_TWL4030 |
241 | tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" | |
242 | depends on TWL4030_CORE | |
243 | help | |
244 | Say yes here to access the GPIO signals of various multi-function | |
245 | power management chips from Texas Instruments. | |
246 | ||
e4b736f1 MB |
247 | config GPIO_WM831X |
248 | tristate "WM831x GPIOs" | |
249 | depends on MFD_WM831X | |
250 | help | |
251 | Say yes here to access the GPIO signals of WM831x power management | |
252 | chips from Wolfson Microelectronics. | |
253 | ||
38f6ce45 MB |
254 | config GPIO_WM8350 |
255 | tristate "WM8350 GPIOs" | |
256 | depends on MFD_WM8350 | |
257 | help | |
258 | Say yes here to access the GPIO signals of WM8350 power management | |
259 | chips from Wolfson Microelectronics. | |
260 | ||
2955c309 MB |
261 | config GPIO_WM8994 |
262 | tristate "WM8994 GPIOs" | |
263 | depends on MFD_WM8994 | |
264 | help | |
265 | Say yes here to access the GPIO signals of WM8994 audio hub | |
266 | CODECs from Wolfson Microelectronics. | |
267 | ||
ef72af40 MH |
268 | config GPIO_ADP5520 |
269 | tristate "GPIO Support for ADP5520 PMIC" | |
270 | depends on PMIC_ADP5520 | |
271 | help | |
272 | This option enables support for on-chip GPIO found | |
273 | on Analog Devices ADP5520 PMICs. | |
274 | ||
275 | To compile this driver as a module, choose M here: the module will | |
276 | be called adp5520-gpio. | |
277 | ||
80884094 MH |
278 | config GPIO_ADP5588 |
279 | tristate "ADP5588 I2C GPIO expander" | |
280 | depends on I2C | |
281 | help | |
282 | This option enables support for 18 GPIOs found | |
283 | on Analog Devices ADP5588 GPIO Expanders. | |
284 | To compile this driver as a module, choose M here: the module will be | |
285 | called adp5588-gpio. | |
286 | ||
459773ae MH |
287 | config GPIO_ADP5588_IRQ |
288 | bool "Interrupt controller support for ADP5588" | |
289 | depends on GPIO_ADP5588=y | |
290 | help | |
291 | Say yes here to enable the adp5588 to be used as an interrupt | |
292 | controller. It requires the driver to be built in the kernel. | |
293 | ||
ff1d5c2f MB |
294 | comment "PCI GPIO expanders:" |
295 | ||
5f0a96b0 AS |
296 | config GPIO_CS5535 |
297 | tristate "AMD CS5535/CS5536 GPIO support" | |
c95d1e53 | 298 | depends on PCI && !CS5535_GPIO |
5f0a96b0 AS |
299 | help |
300 | The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that | |
301 | can be used for quite a number of things. The CS5535/6 is found on | |
302 | AMD Geode and Lemote Yeeloong devices. | |
303 | ||
304 | If unsure, say N. | |
305 | ||
ff1d5c2f MB |
306 | config GPIO_BT8XX |
307 | tristate "BT8XX GPIO abuser" | |
308 | depends on PCI && VIDEO_BT848=n | |
309 | help | |
310 | The BT8xx frame grabber chip has 24 GPIO pins than can be abused | |
311 | as a cheap PCI GPIO card. | |
312 | ||
313 | This chip can be found on Miro, Hauppauge and STB TV-cards. | |
314 | ||
315 | The card needs to be physically altered for using it as a | |
316 | GPIO card. For more information on how to build a GPIO card | |
317 | from a BT8xx TV card, see the documentation file at | |
318 | Documentation/bt8xxgpio.txt | |
319 | ||
320 | If unsure, say N. | |
321 | ||
8bf02617 | 322 | config GPIO_LANGWELL |
8081c84c | 323 | bool "Intel Langwell/Penwell GPIO support" |
8bf02617 AD |
324 | depends on PCI |
325 | help | |
8081c84c | 326 | Say Y here to support Intel Langwell/Penwell GPIO. |
8bf02617 | 327 | |
04c17aa8 TM |
328 | config GPIO_PCH |
329 | tristate "PCH GPIO of Intel Topcliff" | |
330 | depends on PCI | |
331 | help | |
332 | This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff | |
333 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
334 | This driver can access PCH GPIO device. | |
335 | ||
35570ac6 RR |
336 | config GPIO_TIMBERDALE |
337 | bool "Support for timberdale GPIO IP" | |
338 | depends on MFD_TIMBERDALE && GPIOLIB && HAS_IOMEM | |
339 | ---help--- | |
340 | Add support for the GPIO IP in the timberdale FPGA. | |
341 | ||
9956d02d FF |
342 | config GPIO_RDC321X |
343 | tristate "RDC R-321x GPIO support" | |
344 | depends on PCI && GPIOLIB | |
e4be3cb7 | 345 | select MFD_CORE |
9956d02d FF |
346 | select MFD_RDC321X |
347 | help | |
348 | Support for the RDC R321x SoC GPIOs over southbridge | |
349 | PCI configuration space. | |
350 | ||
a9c5fff5 DB |
351 | comment "SPI GPIO expanders:" |
352 | ||
0c36ec31 JB |
353 | config GPIO_MAX7301 |
354 | tristate "Maxim MAX7301 GPIO expander" | |
355 | depends on SPI_MASTER | |
e952805d | 356 | select GPIO_MAX730X |
0c36ec31 | 357 | help |
e952805d | 358 | GPIO driver for Maxim MAX7301 SPI-based GPIO expander. |
0c36ec31 | 359 | |
e58b9e27 DB |
360 | config GPIO_MCP23S08 |
361 | tristate "Microchip MCP23S08 I/O expander" | |
362 | depends on SPI_MASTER | |
363 | help | |
364 | SPI driver for Microchip MCP23S08 I/O expander. This provides | |
365 | a GPIO interface supporting inputs and outputs. | |
366 | ||
1e5db006 RR |
367 | config GPIO_MC33880 |
368 | tristate "Freescale MC33880 high-side/low-side switch" | |
369 | depends on SPI_MASTER | |
370 | help | |
371 | SPI driver for Freescale MC33880 high-side/low-side switch. | |
372 | This provides GPIO interface supporting inputs and outputs. | |
373 | ||
ead6db08 MG |
374 | config GPIO_74X164 |
375 | tristate "74x164 serial-in/parallel-out 8-bits shift register" | |
376 | depends on SPI_MASTER | |
377 | help | |
378 | Platform driver for 74x164 compatible serial-in/parallel-out | |
379 | 8-outputs shift registers. This driver can be used to provide access | |
380 | to more gpio outputs. | |
381 | ||
4cf8e53b MV |
382 | comment "AC97 GPIO expanders:" |
383 | ||
384 | config GPIO_UCB1400 | |
385 | bool "Philips UCB1400 GPIO" | |
386 | depends on UCB1400_CORE | |
387 | help | |
388 | This enables support for the Philips UCB1400 GPIO pins. | |
389 | The UCB1400 is an AC97 audio codec. | |
390 | ||
391 | To compile this driver as a module, choose M here: the | |
392 | module will be called ucb1400_gpio. | |
393 | ||
800e69fb IS |
394 | comment "MODULbus GPIO expanders:" |
395 | ||
396 | config GPIO_JANZ_TTL | |
397 | tristate "Janz VMOD-TTL Digital IO Module" | |
398 | depends on MFD_JANZ_CMODIO | |
399 | help | |
400 | This enables support for the Janz VMOD-TTL Digital IO module. | |
401 | This driver provides support for driving the pins in output | |
402 | mode only. Input mode is not supported. | |
403 | ||
7444a72e | 404 | endif |