[linux.git] / drivers / scsi / NCR5380.h

/* 
 * NCR 5380 defines
 *
 * Copyright 1993, Drew Eckhardt
 *	Visionary Computing
 *	(Unix consulting and custom programming)
 * 	[email protected]
 *      +1 (303) 666-5836
 *
 * DISTRIBUTION RELEASE 7
 *
 * For more information, please consult 
 *
 * NCR 5380 Family
 * SCSI Protocol Controller
 * Databook
 * NCR Microelectronics
 * 1635 Aeroplaza Drive
 * Colorado Springs, CO 80916
 * 1+ (719) 578-3400
 * 1+ (800) 334-5454
 */

/*
 * $Log: NCR5380.h,v $
 */

#ifndef NCR5380_H
#define NCR5380_H

#include <linux/interrupt.h>

#ifdef AUTOSENSE
#include <scsi/scsi_eh.h>
#endif

#define NCR5380_PUBLIC_RELEASE 7
#define NCR53C400_PUBLIC_RELEASE 2

#define NDEBUG_ARBITRATION	0x1
#define NDEBUG_AUTOSENSE	0x2
#define NDEBUG_DMA		0x4
#define NDEBUG_HANDSHAKE	0x8
#define NDEBUG_INFORMATION	0x10
#define NDEBUG_INIT		0x20
#define NDEBUG_INTR		0x40
#define NDEBUG_LINKED		0x80
#define NDEBUG_MAIN		0x100
#define NDEBUG_NO_DATAOUT	0x200
#define NDEBUG_NO_WRITE		0x400
#define NDEBUG_PIO		0x800
#define NDEBUG_PSEUDO_DMA	0x1000
#define NDEBUG_QUEUES		0x2000
#define NDEBUG_RESELECTION	0x4000
#define NDEBUG_SELECTION	0x8000
#define NDEBUG_USLEEP		0x10000
#define NDEBUG_LAST_BYTE_SENT	0x20000
#define NDEBUG_RESTART_SELECT	0x40000
#define NDEBUG_EXTENDED		0x80000
#define NDEBUG_C400_PREAD	0x100000
#define NDEBUG_C400_PWRITE	0x200000
#define NDEBUG_LISTS		0x400000

#define NDEBUG_ANY		0xFFFFFFFFUL

/* 
 * The contents of the OUTPUT DATA register are asserted on the bus when
 * either arbitration is occurring or the phase-indicating signals (
 * IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
 * bit in the INITIATOR COMMAND register is set.
 */

#define OUTPUT_DATA_REG         0	/* wo DATA lines on SCSI bus */
#define CURRENT_SCSI_DATA_REG   0	/* ro same */

#define INITIATOR_COMMAND_REG	1	/* rw */
#define ICR_ASSERT_RST		0x80	/* rw Set to assert RST  */
#define ICR_ARBITRATION_PROGRESS 0x40	/* ro Indicates arbitration complete */
#define ICR_TRI_STATE		0x40	/* wo Set to tri-state drivers */
#define ICR_ARBITRATION_LOST	0x20	/* ro Indicates arbitration lost */
#define ICR_DIFF_ENABLE		0x20	/* wo Set to enable diff. drivers */
#define ICR_ASSERT_ACK		0x10	/* rw ini Set to assert ACK */
#define ICR_ASSERT_BSY		0x08	/* rw Set to assert BSY */
#define ICR_ASSERT_SEL 		0x04	/* rw Set to assert SEL */
#define ICR_ASSERT_ATN		0x02	/* rw Set to assert ATN */
#define ICR_ASSERT_DATA		0x01	/* rw SCSI_DATA_REG is asserted */

#ifdef DIFFERENTIAL
#define ICR_BASE		ICR_DIFF_ENABLE
#else
#define ICR_BASE		0
#endif

#define MODE_REG		2
/*
 * Note : BLOCK_DMA code will keep DRQ asserted for the duration of the 
 * transfer, causing the chip to hog the bus.  You probably don't want 
 * this.
 */
#define MR_BLOCK_DMA_MODE	0x80	/* rw block mode DMA */
#define MR_TARGET		0x40	/* rw target mode */
#define MR_ENABLE_PAR_CHECK	0x20	/* rw enable parity checking */
#define MR_ENABLE_PAR_INTR	0x10	/* rw enable bad parity interrupt */
#define MR_ENABLE_EOP_INTR	0x08	/* rw enable eop interrupt */
#define MR_MONITOR_BSY		0x04	/* rw enable int on unexpected bsy fail */
#define MR_DMA_MODE		0x02	/* rw DMA / pseudo DMA mode */
#define MR_ARBITRATE		0x01	/* rw start arbitration */

#ifdef PARITY
#define MR_BASE			MR_ENABLE_PAR_CHECK
#else
#define MR_BASE			0
#endif

#define TARGET_COMMAND_REG	3
#define TCR_LAST_BYTE_SENT	0x80	/* ro DMA done */
#define TCR_ASSERT_REQ		0x08	/* tgt rw assert REQ */
#define TCR_ASSERT_MSG		0x04	/* tgt rw assert MSG */
#define TCR_ASSERT_CD		0x02	/* tgt rw assert CD */
#define TCR_ASSERT_IO		0x01	/* tgt rw assert IO */

#define STATUS_REG		4	/* ro */
/*
 * Note : a set bit indicates an active signal, driven by us or another 
 * device.
 */
#define SR_RST			0x80
#define SR_BSY			0x40
#define SR_REQ			0x20
#define SR_MSG			0x10
#define SR_CD			0x08
#define SR_IO			0x04
#define SR_SEL			0x02
#define SR_DBP			0x01

/*
 * Setting a bit in this register will cause an interrupt to be generated when 
 * BSY is false and SEL true and this bit is asserted  on the bus.
 */
#define SELECT_ENABLE_REG	4	/* wo */

#define BUS_AND_STATUS_REG	5	/* ro */
#define BASR_END_DMA_TRANSFER	0x80	/* ro set on end of transfer */
#define BASR_DRQ		0x40	/* ro mirror of DRQ pin */
#define BASR_PARITY_ERROR	0x20	/* ro parity error detected */
#define BASR_IRQ		0x10	/* ro mirror of IRQ pin */
#define BASR_PHASE_MATCH	0x08	/* ro Set when MSG CD IO match TCR */
#define BASR_BUSY_ERROR		0x04	/* ro Unexpected change to inactive state */
#define BASR_ATN 		0x02	/* ro BUS status */
#define BASR_ACK		0x01	/* ro BUS status */

/* Write any value to this register to start a DMA send */
#define START_DMA_SEND_REG	5	/* wo */

/* 
 * Used in DMA transfer mode, data is latched from the SCSI bus on
 * the falling edge of REQ (ini) or ACK (tgt)
 */
#define INPUT_DATA_REG			6	/* ro */

/* Write any value to this register to start a DMA receive */
#define START_DMA_TARGET_RECEIVE_REG	6	/* wo */

/* Read this register to clear interrupt conditions */
#define RESET_PARITY_INTERRUPT_REG	7	/* ro */

/* Write any value to this register to start an ini mode DMA receive */
#define START_DMA_INITIATOR_RECEIVE_REG 7	/* wo */

#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8	/* rw */

#define CSR_RESET              0x80	/* wo  Resets 53c400 */
#define CSR_53C80_REG          0x80	/* ro  5380 registers busy */
#define CSR_TRANS_DIR          0x40	/* rw  Data transfer direction */
#define CSR_SCSI_BUFF_INTR     0x20	/* rw  Enable int on transfer ready */
#define CSR_53C80_INTR         0x10	/* rw  Enable 53c80 interrupts */
#define CSR_SHARED_INTR        0x08	/* rw  Interrupt sharing */
#define CSR_HOST_BUF_NOT_RDY   0x04	/* ro  Is Host buffer ready */
#define CSR_SCSI_BUF_RDY       0x02	/* ro  SCSI buffer read */
#define CSR_GATED_53C80_IRQ    0x01	/* ro  Last block xferred */

#if 0
#define CSR_BASE CSR_SCSI_BUFF_INTR | CSR_53C80_INTR
#else
#define CSR_BASE CSR_53C80_INTR
#endif

/* Number of 128-byte blocks to be transferred */
#define C400_BLOCK_COUNTER_REG   NCR53C400_register_offset-7	/* rw */

/* Resume transfer after disconnect */
#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6	/* wo */

/* Access to host buffer stack */
#define C400_HOST_BUFFER         NCR53C400_register_offset-4	/* rw */


/* Note : PHASE_* macros are based on the values of the STATUS register */
#define PHASE_MASK 	(SR_MSG | SR_CD | SR_IO)

#define PHASE_DATAOUT		0
#define PHASE_DATAIN		SR_IO
#define PHASE_CMDOUT		SR_CD
#define PHASE_STATIN		(SR_CD | SR_IO)
#define PHASE_MSGOUT		(SR_MSG | SR_CD)
#define PHASE_MSGIN		(SR_MSG | SR_CD | SR_IO)
#define PHASE_UNKNOWN		0xff

/* 
 * Convert status register phase to something we can use to set phase in 
 * the target register so we can get phase mismatch interrupts on DMA 
 * transfers.
 */

#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)

/*
 * The internal should_disconnect() function returns these based on the 
 * expected length of a disconnect if a device supports disconnect/
 * reconnect.
 */

#define DISCONNECT_NONE		0
#define DISCONNECT_TIME_TO_DATA	1
#define DISCONNECT_LONG		2

/* 
 * These are "special" values for the tag parameter passed to NCR5380_select.
 */

#define TAG_NEXT	-1	/* Use next free tag */
#define TAG_NONE	-2	/* 
				 * Establish I_T_L nexus instead of I_T_L_Q
				 * even on SCSI-II devices.
				 */

/*
 * These are "special" values for the irq and dma_channel fields of the 
 * Scsi_Host structure
 */

#define SCSI_IRQ_NONE	255
#define DMA_NONE	255
#define IRQ_AUTO	254
#define DMA_AUTO	254
#define PORT_AUTO	0xffff	/* autoprobe io port for 53c400a */

#define FLAG_HAS_LAST_BYTE_SENT		1	/* NCR53c81 or better */
#define FLAG_CHECK_LAST_BYTE_SENT	2	/* Only test once */
#define FLAG_NCR53C400			4	/* NCR53c400 */
#define FLAG_NO_PSEUDO_DMA		8	/* Inhibit DMA */
#define FLAG_DTC3181E			16	/* DTC3181E */

#ifndef ASM
struct NCR5380_hostdata {
	NCR5380_implementation_fields;		/* implementation specific */
	struct Scsi_Host *host;			/* Host backpointer */
	unsigned char id_mask, id_higher_mask;	/* 1 << id, all bits greater */
	unsigned char targets_present;		/* targets we have connected
						   to, so we can call a select
						   failure a retryable condition */
	volatile unsigned char busy[8];		/* index = target, bit = lun */
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
	volatile int dma_len;			/* requested length of DMA */
#endif
	volatile unsigned char last_message;	/* last message OUT */
	volatile Scsi_Cmnd *connected;		/* currently connected command */
	volatile Scsi_Cmnd *issue_queue;	/* waiting to be issued */
	volatile Scsi_Cmnd *disconnected_queue;	/* waiting for reconnect */
	volatile int restart_select;		/* we have disconnected,
						   used to restart 
						   NCR5380_select() */
	volatile unsigned aborted:1;		/* flag, says aborted */
	int flags;
	unsigned long time_expires;		/* in jiffies, set prior to sleeping */
	int select_time;			/* timer in select for target response */
	volatile Scsi_Cmnd *selecting;
	struct delayed_work coroutine;		/* our co-routine */
#ifdef NCR5380_STATS
	unsigned timebase;			/* Base for time calcs */
	long time_read[8];			/* time to do reads */
	long time_write[8];			/* time to do writes */
	unsigned long bytes_read[8];		/* bytes read */
	unsigned long bytes_write[8];		/* bytes written */
	unsigned pendingr;
	unsigned pendingw;
#endif
#ifdef AUTOSENSE
	struct scsi_eh_save ses;
#endif
};

#ifdef __KERNEL__

#define dprintk(a,b)			do {} while(0)
#define NCR5380_dprint(a,b)		do {} while(0)
#define NCR5380_dprint_phase(a,b)	do {} while(0)

#if defined(AUTOPROBE_IRQ)
static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
#endif
static int NCR5380_init(struct Scsi_Host *instance, int flags);
static void NCR5380_exit(struct Scsi_Host *instance);
static void NCR5380_information_transfer(struct Scsi_Host *instance);
#ifndef DONT_USE_INTR
static irqreturn_t NCR5380_intr(int irq, void *dev_id);
#endif
static void NCR5380_main(struct work_struct *work);
static void __maybe_unused NCR5380_print_options(struct Scsi_Host *instance);
#ifdef NDEBUG
static void NCR5380_print_phase(struct Scsi_Host *instance);
static void NCR5380_print(struct Scsi_Host *instance);
#endif
static int NCR5380_abort(Scsi_Cmnd * cmd);
static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
static int NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
static int __maybe_unused NCR5380_proc_info(struct Scsi_Host *instance,
	char *buffer, char **start, off_t offset, int length, int inout);

static void NCR5380_reselect(struct Scsi_Host *instance);
static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag);
#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
#endif
static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);

#if (defined(REAL_DMA) || defined(REAL_DMA_POLL))

#if defined(i386) || defined(__alpha__)

/**
 *	NCR5380_pc_dma_setup		-	setup ISA DMA
 *	@instance: adapter to set up
 *	@ptr: block to transfer (virtual address)
 *	@count: number of bytes to transfer
 *	@mode: DMA controller mode to use
 *
 *	Program the DMA controller ready to perform an ISA DMA transfer
 *	on this chip.
 *
 *	Locks: takes and releases the ISA DMA lock.
 */
 
static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host *instance, unsigned char *ptr, unsigned int count, unsigned char mode)
{
	unsigned limit;
	unsigned long bus_addr = virt_to_bus(ptr);
	unsigned long flags;

	if (instance->dma_channel <= 3) {
		if (count > 65536)
			count = 65536;
		limit = 65536 - (bus_addr & 0xFFFF);
	} else {
		if (count > 65536 * 2)
			count = 65536 * 2;
		limit = 65536 * 2 - (bus_addr & 0x1FFFF);
	}

	if (count > limit)
		count = limit;

	if ((count & 1) || (bus_addr & 1))
		panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
	
	flags=claim_dma_lock();
	disable_dma(instance->dma_channel);
	clear_dma_ff(instance->dma_channel);
	set_dma_addr(instance->dma_channel, bus_addr);
	set_dma_count(instance->dma_channel, count);
	set_dma_mode(instance->dma_channel, mode);
	enable_dma(instance->dma_channel);
	release_dma_lock(flags);
	
	return count;
}

/**
 *	NCR5380_pc_dma_write_setup		-	setup ISA DMA write
 *	@instance: adapter to set up
 *	@ptr: block to transfer (virtual address)
 *	@count: number of bytes to transfer
 *
 *	Program the DMA controller ready to perform an ISA DMA write to the
 *	SCSI controller.
 *
 *	Locks: called routines take and release the ISA DMA lock.
 */

static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
{
	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
}

/**
 *	NCR5380_pc_dma_read_setup		-	setup ISA DMA read
 *	@instance: adapter to set up
 *	@ptr: block to transfer (virtual address)
 *	@count: number of bytes to transfer
 *
 *	Program the DMA controller ready to perform an ISA DMA read from the
 *	SCSI controller.
 *
 *	Locks: called routines take and release the ISA DMA lock.
 */

static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host *instance, unsigned char *src, unsigned int count)
{
	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
}

/**
 *	NCR5380_pc_dma_residual		-	return bytes left 
 *	@instance: adapter
 *
 *	Reports the number of bytes left over after the DMA was terminated.
 *
 *	Locks: takes and releases the ISA DMA lock.
 */

static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
{
	unsigned long flags;
	int tmp;

	flags = claim_dma_lock();
	clear_dma_ff(instance->dma_channel);
	tmp = get_dma_residue(instance->dma_channel);
	release_dma_lock(flags);
	
	return tmp;
}
#endif				/* defined(i386) || defined(__alpha__) */
#endif				/* defined(REAL_DMA)  */
#endif				/* __KERNEL__ */
#endif				/* ndef ASM */
#endif				/* NCR5380_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	* NCR 5380 defines
	3	*
	4	* Copyright 1993, Drew Eckhardt
	5	* Visionary Computing
	6	* (Unix consulting and custom programming)
	7	* [email protected]
	8	* +1 (303) 666-5836
	9	*
	10	* DISTRIBUTION RELEASE 7
	11	*
	12	* For more information, please consult
	13	*
	14	* NCR 5380 Family
	15	* SCSI Protocol Controller
	16	* Databook
	17	* NCR Microelectronics
	18	* 1635 Aeroplaza Drive
	19	* Colorado Springs, CO 80916
	20	* 1+ (719) 578-3400
	21	* 1+ (800) 334-5454
	22	*/
	23
	24	/*
	25	* $Log: NCR5380.h,v $
	26	*/
	27
	28	#ifndef NCR5380_H
	29	#define NCR5380_H
	30
	31	#include <linux/interrupt.h>
	32
28424d3a BH	33	#ifdef AUTOSENSE
	34	#include <scsi/scsi_eh.h>
	35	#endif
	36
1da177e4 LT	37	#define NCR5380_PUBLIC_RELEASE 7
	38	#define NCR53C400_PUBLIC_RELEASE 2
	39
	40	#define NDEBUG_ARBITRATION 0x1
	41	#define NDEBUG_AUTOSENSE 0x2
	42	#define NDEBUG_DMA 0x4
	43	#define NDEBUG_HANDSHAKE 0x8
	44	#define NDEBUG_INFORMATION 0x10
	45	#define NDEBUG_INIT 0x20
	46	#define NDEBUG_INTR 0x40
	47	#define NDEBUG_LINKED 0x80
	48	#define NDEBUG_MAIN 0x100
	49	#define NDEBUG_NO_DATAOUT 0x200
	50	#define NDEBUG_NO_WRITE 0x400
	51	#define NDEBUG_PIO 0x800
	52	#define NDEBUG_PSEUDO_DMA 0x1000
	53	#define NDEBUG_QUEUES 0x2000
	54	#define NDEBUG_RESELECTION 0x4000
	55	#define NDEBUG_SELECTION 0x8000
	56	#define NDEBUG_USLEEP 0x10000
	57	#define NDEBUG_LAST_BYTE_SENT 0x20000
	58	#define NDEBUG_RESTART_SELECT 0x40000
	59	#define NDEBUG_EXTENDED 0x80000
	60	#define NDEBUG_C400_PREAD 0x100000
	61	#define NDEBUG_C400_PWRITE 0x200000
	62	#define NDEBUG_LISTS 0x400000
	63
	64	#define NDEBUG_ANY 0xFFFFFFFFUL
	65
	66	/*
	67	* The contents of the OUTPUT DATA register are asserted on the bus when
	68	* either arbitration is occurring or the phase-indicating signals (
	69	* IO, CD, MSG) in the TARGET COMMAND register and the ASSERT DATA
	70	* bit in the INITIATOR COMMAND register is set.
	71	*/
	72
	73	#define OUTPUT_DATA_REG 0 /* wo DATA lines on SCSI bus */
	74	#define CURRENT_SCSI_DATA_REG 0 /* ro same */
	75
	76	#define INITIATOR_COMMAND_REG 1 /* rw */
	77	#define ICR_ASSERT_RST 0x80 /* rw Set to assert RST */
	78	#define ICR_ARBITRATION_PROGRESS 0x40 /* ro Indicates arbitration complete */
	79	#define ICR_TRI_STATE 0x40 /* wo Set to tri-state drivers */
	80	#define ICR_ARBITRATION_LOST 0x20 /* ro Indicates arbitration lost */
	81	#define ICR_DIFF_ENABLE 0x20 /* wo Set to enable diff. drivers */
	82	#define ICR_ASSERT_ACK 0x10 /* rw ini Set to assert ACK */
	83	#define ICR_ASSERT_BSY 0x08 /* rw Set to assert BSY */
	84	#define ICR_ASSERT_SEL 0x04 /* rw Set to assert SEL */
	85	#define ICR_ASSERT_ATN 0x02 /* rw Set to assert ATN */
	86	#define ICR_ASSERT_DATA 0x01 /* rw SCSI_DATA_REG is asserted */
	87
	88	#ifdef DIFFERENTIAL
	89	#define ICR_BASE ICR_DIFF_ENABLE
	90	#else
	91	#define ICR_BASE 0
	92	#endif
	93
	94	#define MODE_REG 2
	95	/*
	96	* Note : BLOCK_DMA code will keep DRQ asserted for the duration of the
	97	* transfer, causing the chip to hog the bus. You probably don't want
	98	* this.
	99	*/
	100	#define MR_BLOCK_DMA_MODE 0x80 /* rw block mode DMA */
101	#define MR_TARGET 0x40 /* rw target mode */
102	#define MR_ENABLE_PAR_CHECK 0x20 /* rw enable parity checking */
103	#define MR_ENABLE_PAR_INTR 0x10 /* rw enable bad parity interrupt */
104	#define MR_ENABLE_EOP_INTR 0x08 /* rw enable eop interrupt */
105	#define MR_MONITOR_BSY 0x04 /* rw enable int on unexpected bsy fail */
106	#define MR_DMA_MODE 0x02 /* rw DMA / pseudo DMA mode */
107	#define MR_ARBITRATE 0x01 /* rw start arbitration */
108
109	#ifdef PARITY
110	#define MR_BASE MR_ENABLE_PAR_CHECK
111	#else
112	#define MR_BASE 0
113	#endif
114
115	#define TARGET_COMMAND_REG 3
116	#define TCR_LAST_BYTE_SENT 0x80 /* ro DMA done */
117	#define TCR_ASSERT_REQ 0x08 /* tgt rw assert REQ */
118	#define TCR_ASSERT_MSG 0x04 /* tgt rw assert MSG */
119	#define TCR_ASSERT_CD 0x02 /* tgt rw assert CD */
120	#define TCR_ASSERT_IO 0x01 /* tgt rw assert IO */
121
122	#define STATUS_REG 4 /* ro */
123	/*
124	* Note : a set bit indicates an active signal, driven by us or another
125	* device.
126	*/
127	#define SR_RST 0x80
128	#define SR_BSY 0x40
129	#define SR_REQ 0x20
130	#define SR_MSG 0x10
131	#define SR_CD 0x08
132	#define SR_IO 0x04
133	#define SR_SEL 0x02
134	#define SR_DBP 0x01
135
136	/*
137	* Setting a bit in this register will cause an interrupt to be generated when
138	* BSY is false and SEL true and this bit is asserted on the bus.
139	*/
140	#define SELECT_ENABLE_REG 4 /* wo */
141
142	#define BUS_AND_STATUS_REG 5 /* ro */
143	#define BASR_END_DMA_TRANSFER 0x80 /* ro set on end of transfer */
144	#define BASR_DRQ 0x40 /* ro mirror of DRQ pin */
145	#define BASR_PARITY_ERROR 0x20 /* ro parity error detected */
146	#define BASR_IRQ 0x10 /* ro mirror of IRQ pin */
147	#define BASR_PHASE_MATCH 0x08 /* ro Set when MSG CD IO match TCR */
148	#define BASR_BUSY_ERROR 0x04 /* ro Unexpected change to inactive state */
149	#define BASR_ATN 0x02 /* ro BUS status */
150	#define BASR_ACK 0x01 /* ro BUS status */
151
152	/* Write any value to this register to start a DMA send */
153	#define START_DMA_SEND_REG 5 /* wo */
154
155	/*
156	* Used in DMA transfer mode, data is latched from the SCSI bus on
157	* the falling edge of REQ (ini) or ACK (tgt)
158	*/
159	#define INPUT_DATA_REG 6 /* ro */
160
161	/* Write any value to this register to start a DMA receive */
162	#define START_DMA_TARGET_RECEIVE_REG 6 /* wo */
163
164	/* Read this register to clear interrupt conditions */
165	#define RESET_PARITY_INTERRUPT_REG 7 /* ro */
166
167	/* Write any value to this register to start an ini mode DMA receive */
168	#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
169
170	#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
171
172	#define CSR_RESET 0x80 /* wo Resets 53c400 */
173	#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
174	#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
175	#define CSR_SCSI_BUFF_INTR 0x20 /* rw Enable int on transfer ready */
176	#define CSR_53C80_INTR 0x10 /* rw Enable 53c80 interrupts */
177	#define CSR_SHARED_INTR 0x08 /* rw Interrupt sharing */
178	#define CSR_HOST_BUF_NOT_RDY 0x04 /* ro Is Host buffer ready */
179	#define CSR_SCSI_BUF_RDY 0x02 /* ro SCSI buffer read */
180	#define CSR_GATED_53C80_IRQ 0x01 /* ro Last block xferred */
181
182	#if 0
183	#define CSR_BASE CSR_SCSI_BUFF_INTR \| CSR_53C80_INTR
184	#else
185	#define CSR_BASE CSR_53C80_INTR
186	#endif
187
188	/* Number of 128-byte blocks to be transferred */
189	#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
190
191	/* Resume transfer after disconnect */
192	#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
193
194	/* Access to host buffer stack */
195	#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
196
197
198	/* Note : PHASE_* macros are based on the values of the STATUS register */
199	#define PHASE_MASK (SR_MSG \| SR_CD \| SR_IO)
200
201	#define PHASE_DATAOUT 0
202	#define PHASE_DATAIN SR_IO
203	#define PHASE_CMDOUT SR_CD
204	#define PHASE_STATIN (SR_CD \| SR_IO)
205	#define PHASE_MSGOUT (SR_MSG \| SR_CD)
206	#define PHASE_MSGIN (SR_MSG \| SR_CD \| SR_IO)
207	#define PHASE_UNKNOWN 0xff
208
209	/*
210	* Convert status register phase to something we can use to set phase in
211	* the target register so we can get phase mismatch interrupts on DMA
212	* transfers.
213	*/
214
215	#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
216
217	/*
218	* The internal should_disconnect() function returns these based on the
219	* expected length of a disconnect if a device supports disconnect/
220	* reconnect.
221	*/
222
223	#define DISCONNECT_NONE 0
224	#define DISCONNECT_TIME_TO_DATA 1
225	#define DISCONNECT_LONG 2
226
227	/*
228	* These are "special" values for the tag parameter passed to NCR5380_select.
229	*/
230
231	#define TAG_NEXT -1 /* Use next free tag */
232	#define TAG_NONE -2 /*
233	* Establish I_T_L nexus instead of I_T_L_Q
234	* even on SCSI-II devices.
235	*/
236
237	/*
238	* These are "special" values for the irq and dma_channel fields of the
239	* Scsi_Host structure
240	*/
241
242	#define SCSI_IRQ_NONE 255
243	#define DMA_NONE 255
244	#define IRQ_AUTO 254
245	#define DMA_AUTO 254
246	#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
247
248	#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
249	#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
250	#define FLAG_NCR53C400 4 /* NCR53c400 */
251	#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
252	#define FLAG_DTC3181E 16 /* DTC3181E */
253
254	#ifndef ASM
255	struct NCR5380_hostdata {
256	NCR5380_implementation_fields; /* implementation specific */
257	struct Scsi_Host host; / Host backpointer */
258	unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
259	unsigned char targets_present; /* targets we have connected
260	to, so we can call a select
261	failure a retryable condition */
262	volatile unsigned char busy[8]; /* index = target, bit = lun */
263	#if defined(REAL_DMA) \|\| defined(REAL_DMA_POLL)
264	volatile int dma_len; /* requested length of DMA */
265	#endif
266	volatile unsigned char last_message; /* last message OUT */
267	volatile Scsi_Cmnd connected; / currently connected command */
268	volatile Scsi_Cmnd issue_queue; / waiting to be issued */
269	volatile Scsi_Cmnd disconnected_queue; / waiting for reconnect */
270	volatile int restart_select; /* we have disconnected,
271	used to restart
272	NCR5380_select() */
273	volatile unsigned aborted:1; /* flag, says aborted */
274	int flags;
275	unsigned long time_expires; /* in jiffies, set prior to sleeping */
276	int select_time; /* timer in select for target response */
277	volatile Scsi_Cmnd *selecting;
c4028958	278	struct delayed_work coroutine; /* our co-routine */
1da177e4 LT	279	#ifdef NCR5380_STATS
	280	unsigned timebase; /* Base for time calcs */
	281	long time_read[8]; /* time to do reads */
	282	long time_write[8]; /* time to do writes */
	283	unsigned long bytes_read[8]; /* bytes read */
	284	unsigned long bytes_write[8]; /* bytes written */
	285	unsigned pendingr;
	286	unsigned pendingw;
	287	#endif
28424d3a BH	288	#ifdef AUTOSENSE
	289	struct scsi_eh_save ses;
	290	#endif
1da177e4 LT	291	};
	292
	293	#ifdef __KERNEL__
	294
	295	#define dprintk(a,b) do {} while(0)
	296	#define NCR5380_dprint(a,b) do {} while(0)
	297	#define NCR5380_dprint_phase(a,b) do {} while(0)
	298
	299	#if defined(AUTOPROBE_IRQ)
	300	static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
	301	#endif
	302	static int NCR5380_init(struct Scsi_Host *instance, int flags);
	303	static void NCR5380_exit(struct Scsi_Host *instance);
	304	static void NCR5380_information_transfer(struct Scsi_Host *instance);
	305	#ifndef DONT_USE_INTR
7d12e780	306	static irqreturn_t NCR5380_intr(int irq, void *dev_id);
1da177e4	307	#endif
c4028958	308	static void NCR5380_main(struct work_struct *work);
702809ce	309	static void __maybe_unused NCR5380_print_options(struct Scsi_Host *instance);
1da177e4 LT	310	#ifdef NDEBUG
	311	static void NCR5380_print_phase(struct Scsi_Host *instance);
	312	static void NCR5380_print(struct Scsi_Host *instance);
	313	#endif
	314	static int NCR5380_abort(Scsi_Cmnd * cmd);
	315	static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
f281233d	316	static int NCR5380_queue_command(struct Scsi_Host , struct scsi_cmnd );
702809ce AM	317	static int __maybe_unused NCR5380_proc_info(struct Scsi_Host *instance,
702809ce AM	318	char buffer, char *start, off_t offset, int length, int inout);
1da177e4 LT	319
	320	static void NCR5380_reselect(struct Scsi_Host *instance);
	321	static int NCR5380_select(struct Scsi_Host instance, Scsi_Cmnd cmd, int tag);
	322	#if defined(PSEUDO_DMA) \|\| defined(REAL_DMA) \|\| defined(REAL_DMA_POLL)
	323	static int NCR5380_transfer_dma(struct Scsi_Host instance, unsigned char phase, int count, unsigned char *data);
	324	#endif
	325	static int NCR5380_transfer_pio(struct Scsi_Host instance, unsigned char phase, int count, unsigned char *data);
	326
	327	#if (defined(REAL_DMA) \|\| defined(REAL_DMA_POLL))
	328
	329	#if defined(i386) \|\| defined(__alpha__)
	330
	331	/**
	332	* NCR5380_pc_dma_setup - setup ISA DMA
	333	* @instance: adapter to set up
	334	* @ptr: block to transfer (virtual address)
	335	* @count: number of bytes to transfer
	336	* @mode: DMA controller mode to use
	337	*
	338	* Program the DMA controller ready to perform an ISA DMA transfer
	339	* on this chip.
	340	*
	341	* Locks: takes and releases the ISA DMA lock.
	342	*/
	343
	344	static __inline__ int NCR5380_pc_dma_setup(struct Scsi_Host instance, unsigned char ptr, unsigned int count, unsigned char mode)
	345	{
	346	unsigned limit;
	347	unsigned long bus_addr = virt_to_bus(ptr);
	348	unsigned long flags;
	349
	350	if (instance->dma_channel <= 3) {
	351	if (count > 65536)
	352	count = 65536;
	353	limit = 65536 - (bus_addr & 0xFFFF);
	354	} else {
	355	if (count > 65536 * 2)
	356	count = 65536 * 2;
	357	limit = 65536 * 2 - (bus_addr & 0x1FFFF);
	358	}
	359
	360	if (count > limit)
	361	count = limit;
	362
	363	if ((count & 1) \|\| (bus_addr & 1))
	364	panic("scsi%d : attempted unaligned DMA transfer\n", instance->host_no);
	365
	366	flags=claim_dma_lock();
	367	disable_dma(instance->dma_channel);
	368	clear_dma_ff(instance->dma_channel);
	369	set_dma_addr(instance->dma_channel, bus_addr);
	370	set_dma_count(instance->dma_channel, count);
	371	set_dma_mode(instance->dma_channel, mode);
	372	enable_dma(instance->dma_channel);
	373	release_dma_lock(flags);
	374
	375	return count;
	376	}
	377
	378	/**
	379	* NCR5380_pc_dma_write_setup - setup ISA DMA write
	380	* @instance: adapter to set up
	381	* @ptr: block to transfer (virtual address)
	382	* @count: number of bytes to transfer
383	*
384	* Program the DMA controller ready to perform an ISA DMA write to the
385	* SCSI controller.
386	*
387	* Locks: called routines take and release the ISA DMA lock.
388	*/
389
390	static __inline__ int NCR5380_pc_dma_write_setup(struct Scsi_Host instance, unsigned char src, unsigned int count)
391	{
392	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_WRITE);
393	}
394
395	/**
396	* NCR5380_pc_dma_read_setup - setup ISA DMA read
397	* @instance: adapter to set up
398	* @ptr: block to transfer (virtual address)
399	* @count: number of bytes to transfer
400	*
401	* Program the DMA controller ready to perform an ISA DMA read from the
402	* SCSI controller.
403	*
404	* Locks: called routines take and release the ISA DMA lock.
405	*/
406
407	static __inline__ int NCR5380_pc_dma_read_setup(struct Scsi_Host instance, unsigned char src, unsigned int count)
408	{
409	return NCR5380_pc_dma_setup(instance, src, count, DMA_MODE_READ);
410	}
411
412	/**
413	* NCR5380_pc_dma_residual - return bytes left
414	* @instance: adapter
415	*
416	* Reports the number of bytes left over after the DMA was terminated.
417	*
418	* Locks: takes and releases the ISA DMA lock.
419	*/
420
421	static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
422	{
423	unsigned long flags;
424	int tmp;
425
426	flags = claim_dma_lock();
427	clear_dma_ff(instance->dma_channel);
428	tmp = get_dma_residue(instance->dma_channel);
429	release_dma_lock(flags);
430
431	return tmp;
432	}
433	#endif /* defined(i386) \|\| defined(__alpha__) */
434	#endif /* defined(REAL_DMA) */
435	#endif /* __KERNEL__ */
436	#endif /* ndef ASM */
437	#endif /* NCR5380_H */