[linux.git] / drivers / block / umem.h


/*
 * This file contains defines for the
 *   Micro Memory MM5415
 * family PCI Memory Module with Battery Backup.
 *
 * Copyright Micro Memory INC 2001.  All rights reserved.
 * Release under the terms of the GNU GENERAL PUBLIC LICENSE version 2.
 * See the file COPYING.
 */

#ifndef _DRIVERS_BLOCK_MM_H
#define _DRIVERS_BLOCK_MM_H


#define IRQ_TIMEOUT (1 * HZ)

/* CSR register definition */
#define MEMCTRLSTATUS_MAGIC	0x00
#define  MM_MAGIC_VALUE		(unsigned char)0x59

#define MEMCTRLSTATUS_BATTERY	0x04
#define  BATTERY_1_DISABLED	0x01
#define  BATTERY_1_FAILURE	0x02
#define  BATTERY_2_DISABLED	0x04
#define  BATTERY_2_FAILURE	0x08

#define MEMCTRLSTATUS_MEMORY	0x07
#define  MEM_128_MB		0xfe
#define  MEM_256_MB		0xfc
#define  MEM_512_MB		0xf8
#define  MEM_1_GB		0xf0
#define  MEM_2_GB		0xe0

#define MEMCTRLCMD_LEDCTRL	0x08
#define  LED_REMOVE		2
#define  LED_FAULT		4
#define  LED_POWER		6
#define	 LED_FLIP		255
#define  LED_OFF		0x00
#define  LED_ON			0x01
#define  LED_FLASH_3_5		0x02
#define  LED_FLASH_7_0		0x03
#define  LED_POWER_ON		0x00
#define  LED_POWER_OFF		0x01
#define  USER_BIT1		0x01
#define  USER_BIT2		0x02

#define MEMORY_INITIALIZED	USER_BIT1

#define MEMCTRLCMD_ERRCTRL	0x0C
#define  EDC_NONE_DEFAULT	0x00
#define  EDC_NONE		0x01
#define  EDC_STORE_READ		0x02
#define  EDC_STORE_CORRECT	0x03

#define MEMCTRLCMD_ERRCNT	0x0D
#define MEMCTRLCMD_ERRSTATUS	0x0E

#define ERROR_DATA_LOG		0x20
#define ERROR_ADDR_LOG		0x28
#define ERROR_COUNT		0x3D
#define ERROR_SYNDROME		0x3E
#define ERROR_CHECK		0x3F

#define DMA_PCI_ADDR		0x40
#define DMA_LOCAL_ADDR		0x48
#define DMA_TRANSFER_SIZE	0x50
#define DMA_DESCRIPTOR_ADDR	0x58
#define DMA_SEMAPHORE_ADDR	0x60
#define DMA_STATUS_CTRL		0x68
#define  DMASCR_GO		0x00001
#define  DMASCR_TRANSFER_READ	0x00002
#define  DMASCR_CHAIN_EN	0x00004
#define  DMASCR_SEM_EN		0x00010
#define  DMASCR_DMA_COMP_EN	0x00020
#define  DMASCR_CHAIN_COMP_EN	0x00040
#define  DMASCR_ERR_INT_EN	0x00080
#define  DMASCR_PARITY_INT_EN	0x00100
#define  DMASCR_ANY_ERR		0x00800
#define  DMASCR_MBE_ERR		0x01000
#define  DMASCR_PARITY_ERR_REP	0x02000
#define  DMASCR_PARITY_ERR_DET	0x04000
#define  DMASCR_SYSTEM_ERR_SIG	0x08000
#define  DMASCR_TARGET_ABT	0x10000
#define  DMASCR_MASTER_ABT	0x20000
#define  DMASCR_DMA_COMPLETE	0x40000
#define  DMASCR_CHAIN_COMPLETE	0x80000

/*
3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE
READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA
TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE
TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS
(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6,
AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING
DMA READ OPERATIONS.
*/
#define        DMASCR_READ   0x60000000
#define        DMASCR_READLINE   0xE0000000
#define        DMASCR_READMULTI   0xC0000000


#define DMASCR_ERROR_MASK	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR | DMASCR_ANY_ERR)
#define DMASCR_HARD_ERROR	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR)

#define WINDOWMAP_WINNUM	0x7B

#define DMA_READ_FROM_HOST 0
#define DMA_WRITE_TO_HOST 1

struct mm_dma_desc {
	__le64	pci_addr;
	__le64	local_addr;
	__le32	transfer_size;
	u32	zero1;
	__le64	next_desc_addr;
	__le64	sem_addr;
	__le32	control_bits;
	u32	zero2;

	dma_addr_t data_dma_handle;

	/* Copy of the bits */
	__le64	sem_control_bits;
} __attribute__((aligned(8)));

/* bits for card->flags */
#define UM_FLAG_DMA_IN_REGS		1
#define UM_FLAG_NO_BYTE_STATUS		2
#define UM_FLAG_NO_BATTREG		4
#define	UM_FLAG_NO_BATT			8
#endif
Commit	Line	Data
1da177e4 LT	1
	2	/*
	3	* This file contains defines for the
	4	* Micro Memory MM5415
	5	* family PCI Memory Module with Battery Backup.
	6	*
	7	* Copyright Micro Memory INC 2001. All rights reserved.
	8	* Release under the terms of the GNU GENERAL PUBLIC LICENSE version 2.
	9	* See the file COPYING.
	10	*/
	11
	12	#ifndef _DRIVERS_BLOCK_MM_H
	13	#define _DRIVERS_BLOCK_MM_H
	14
	15
	16	#define IRQ_TIMEOUT (1 * HZ)
	17
	18	/* CSR register definition */
	19	#define MEMCTRLSTATUS_MAGIC 0x00
	20	#define MM_MAGIC_VALUE (unsigned char)0x59
	21
	22	#define MEMCTRLSTATUS_BATTERY 0x04
	23	#define BATTERY_1_DISABLED 0x01
	24	#define BATTERY_1_FAILURE 0x02
	25	#define BATTERY_2_DISABLED 0x04
	26	#define BATTERY_2_FAILURE 0x08
	27
	28	#define MEMCTRLSTATUS_MEMORY 0x07
	29	#define MEM_128_MB 0xfe
	30	#define MEM_256_MB 0xfc
	31	#define MEM_512_MB 0xf8
	32	#define MEM_1_GB 0xf0
	33	#define MEM_2_GB 0xe0
	34
	35	#define MEMCTRLCMD_LEDCTRL 0x08
	36	#define LED_REMOVE 2
	37	#define LED_FAULT 4
	38	#define LED_POWER 6
	39	#define LED_FLIP 255
	40	#define LED_OFF 0x00
	41	#define LED_ON 0x01
	42	#define LED_FLASH_3_5 0x02
	43	#define LED_FLASH_7_0 0x03
	44	#define LED_POWER_ON 0x00
	45	#define LED_POWER_OFF 0x01
	46	#define USER_BIT1 0x01
	47	#define USER_BIT2 0x02
	48
	49	#define MEMORY_INITIALIZED USER_BIT1
	50
	51	#define MEMCTRLCMD_ERRCTRL 0x0C
	52	#define EDC_NONE_DEFAULT 0x00
	53	#define EDC_NONE 0x01
	54	#define EDC_STORE_READ 0x02
	55	#define EDC_STORE_CORRECT 0x03
	56
	57	#define MEMCTRLCMD_ERRCNT 0x0D
	58	#define MEMCTRLCMD_ERRSTATUS 0x0E
	59
	60	#define ERROR_DATA_LOG 0x20
	61	#define ERROR_ADDR_LOG 0x28
	62	#define ERROR_COUNT 0x3D
	63	#define ERROR_SYNDROME 0x3E
	64	#define ERROR_CHECK 0x3F
65
66	#define DMA_PCI_ADDR 0x40
67	#define DMA_LOCAL_ADDR 0x48
68	#define DMA_TRANSFER_SIZE 0x50
69	#define DMA_DESCRIPTOR_ADDR 0x58
70	#define DMA_SEMAPHORE_ADDR 0x60
71	#define DMA_STATUS_CTRL 0x68
72	#define DMASCR_GO 0x00001
73	#define DMASCR_TRANSFER_READ 0x00002
74	#define DMASCR_CHAIN_EN 0x00004
75	#define DMASCR_SEM_EN 0x00010
76	#define DMASCR_DMA_COMP_EN 0x00020
77	#define DMASCR_CHAIN_COMP_EN 0x00040
78	#define DMASCR_ERR_INT_EN 0x00080
79	#define DMASCR_PARITY_INT_EN 0x00100
80	#define DMASCR_ANY_ERR 0x00800
81	#define DMASCR_MBE_ERR 0x01000
82	#define DMASCR_PARITY_ERR_REP 0x02000
83	#define DMASCR_PARITY_ERR_DET 0x04000
84	#define DMASCR_SYSTEM_ERR_SIG 0x08000
85	#define DMASCR_TARGET_ABT 0x10000
86	#define DMASCR_MASTER_ABT 0x20000
87	#define DMASCR_DMA_COMPLETE 0x40000
88	#define DMASCR_CHAIN_COMPLETE 0x80000
89
4e953a21 JG	90	/*
	91	3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE
	92	READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA
	93	TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE
	94	TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS
	95	(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6,
	96	AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING
1da177e4 LT	97	DMA READ OPERATIONS.
	98	*/
	99	#define DMASCR_READ 0x60000000
	100	#define DMASCR_READLINE 0xE0000000
	101	#define DMASCR_READMULTI 0xC0000000
	102
	103
	104	#define DMASCR_ERROR_MASK (DMASCR_MASTER_ABT \| DMASCR_TARGET_ABT \| DMASCR_SYSTEM_ERR_SIG \| DMASCR_PARITY_ERR_DET \| DMASCR_MBE_ERR \| DMASCR_ANY_ERR)
	105	#define DMASCR_HARD_ERROR (DMASCR_MASTER_ABT \| DMASCR_TARGET_ABT \| DMASCR_SYSTEM_ERR_SIG \| DMASCR_PARITY_ERR_DET \| DMASCR_MBE_ERR)
	106
	107	#define WINDOWMAP_WINNUM 0x7B
	108
	109	#define DMA_READ_FROM_HOST 0
	110	#define DMA_WRITE_TO_HOST 1
	111
	112	struct mm_dma_desc {
	113	__le64 pci_addr;
	114	__le64 local_addr;
	115	__le32 transfer_size;
	116	u32 zero1;
	117	__le64 next_desc_addr;
	118	__le64 sem_addr;
	119	__le32 control_bits;
	120	u32 zero2;
	121
	122	dma_addr_t data_dma_handle;
	123
	124	/* Copy of the bits */
	125	__le64 sem_control_bits;
	126	} __attribute__((aligned(8)));
	127
1da177e4 LT	128	/* bits for card->flags */
	129	#define UM_FLAG_DMA_IN_REGS 1
	130	#define UM_FLAG_NO_BYTE_STATUS 2
	131	#define UM_FLAG_NO_BATTREG 4
	132	#define UM_FLAG_NO_BATT 8
	133	#endif