]>
Commit | Line | Data |
---|---|---|
caaff562 AN |
1 | /* |
2 | * I2C client/driver for the ST M41T80 family of i2c rtc chips. | |
3 | * | |
4 | * Author: Alexander Bigga <[email protected]> | |
5 | * | |
6 | * Based on m41t00.c by Mark A. Greer <[email protected]> | |
7 | * | |
8 | * 2006 (c) mycable GmbH | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | * | |
14 | */ | |
15 | ||
35aa64f3 MR |
16 | #include <linux/bcd.h> |
17 | #include <linux/i2c.h> | |
caaff562 | 18 | #include <linux/init.h> |
9fb1f68d | 19 | #include <linux/kernel.h> |
35aa64f3 MR |
20 | #include <linux/module.h> |
21 | #include <linux/rtc.h> | |
caaff562 | 22 | #include <linux/slab.h> |
41012735 | 23 | #include <linux/smp_lock.h> |
caaff562 | 24 | #include <linux/string.h> |
617780d2 | 25 | #ifdef CONFIG_RTC_DRV_M41T80_WDT |
617780d2 AN |
26 | #include <linux/fs.h> |
27 | #include <linux/ioctl.h> | |
35aa64f3 MR |
28 | #include <linux/miscdevice.h> |
29 | #include <linux/reboot.h> | |
30 | #include <linux/watchdog.h> | |
617780d2 | 31 | #endif |
caaff562 AN |
32 | |
33 | #define M41T80_REG_SSEC 0 | |
34 | #define M41T80_REG_SEC 1 | |
35 | #define M41T80_REG_MIN 2 | |
36 | #define M41T80_REG_HOUR 3 | |
37 | #define M41T80_REG_WDAY 4 | |
38 | #define M41T80_REG_DAY 5 | |
39 | #define M41T80_REG_MON 6 | |
40 | #define M41T80_REG_YEAR 7 | |
41 | #define M41T80_REG_ALARM_MON 0xa | |
42 | #define M41T80_REG_ALARM_DAY 0xb | |
43 | #define M41T80_REG_ALARM_HOUR 0xc | |
44 | #define M41T80_REG_ALARM_MIN 0xd | |
45 | #define M41T80_REG_ALARM_SEC 0xe | |
46 | #define M41T80_REG_FLAGS 0xf | |
47 | #define M41T80_REG_SQW 0x13 | |
48 | ||
49 | #define M41T80_DATETIME_REG_SIZE (M41T80_REG_YEAR + 1) | |
50 | #define M41T80_ALARM_REG_SIZE \ | |
51 | (M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON) | |
52 | ||
53 | #define M41T80_SEC_ST (1 << 7) /* ST: Stop Bit */ | |
54 | #define M41T80_ALMON_AFE (1 << 7) /* AFE: AF Enable Bit */ | |
55 | #define M41T80_ALMON_SQWE (1 << 6) /* SQWE: SQW Enable Bit */ | |
56 | #define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */ | |
57 | #define M41T80_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */ | |
58 | #define M41T80_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */ | |
59 | ||
60 | #define M41T80_FEATURE_HT (1 << 0) | |
61 | #define M41T80_FEATURE_BL (1 << 1) | |
62 | ||
63 | #define DRV_VERSION "0.05" | |
64 | ||
3760f736 JD |
65 | static const struct i2c_device_id m41t80_id[] = { |
66 | { "m41t80", 0 }, | |
67 | { "m41t81", M41T80_FEATURE_HT }, | |
68 | { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, | |
69 | { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, | |
70 | { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, | |
71 | { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, | |
72 | { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, | |
73 | { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL }, | |
74 | { } | |
caaff562 | 75 | }; |
3760f736 | 76 | MODULE_DEVICE_TABLE(i2c, m41t80_id); |
caaff562 AN |
77 | |
78 | struct m41t80_data { | |
3760f736 | 79 | u8 features; |
caaff562 AN |
80 | struct rtc_device *rtc; |
81 | }; | |
82 | ||
83 | static int m41t80_get_datetime(struct i2c_client *client, | |
84 | struct rtc_time *tm) | |
85 | { | |
86 | u8 buf[M41T80_DATETIME_REG_SIZE], dt_addr[1] = { M41T80_REG_SEC }; | |
87 | struct i2c_msg msgs[] = { | |
88 | { | |
89 | .addr = client->addr, | |
90 | .flags = 0, | |
91 | .len = 1, | |
92 | .buf = dt_addr, | |
93 | }, | |
94 | { | |
95 | .addr = client->addr, | |
96 | .flags = I2C_M_RD, | |
97 | .len = M41T80_DATETIME_REG_SIZE - M41T80_REG_SEC, | |
98 | .buf = buf + M41T80_REG_SEC, | |
99 | }, | |
100 | }; | |
101 | ||
102 | if (i2c_transfer(client->adapter, msgs, 2) < 0) { | |
103 | dev_err(&client->dev, "read error\n"); | |
104 | return -EIO; | |
105 | } | |
106 | ||
107 | tm->tm_sec = BCD2BIN(buf[M41T80_REG_SEC] & 0x7f); | |
108 | tm->tm_min = BCD2BIN(buf[M41T80_REG_MIN] & 0x7f); | |
109 | tm->tm_hour = BCD2BIN(buf[M41T80_REG_HOUR] & 0x3f); | |
110 | tm->tm_mday = BCD2BIN(buf[M41T80_REG_DAY] & 0x3f); | |
111 | tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07; | |
112 | tm->tm_mon = BCD2BIN(buf[M41T80_REG_MON] & 0x1f) - 1; | |
113 | ||
114 | /* assume 20YY not 19YY, and ignore the Century Bit */ | |
115 | tm->tm_year = BCD2BIN(buf[M41T80_REG_YEAR]) + 100; | |
116 | return 0; | |
117 | } | |
118 | ||
119 | /* Sets the given date and time to the real time clock. */ | |
120 | static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm) | |
121 | { | |
122 | u8 wbuf[1 + M41T80_DATETIME_REG_SIZE]; | |
123 | u8 *buf = &wbuf[1]; | |
124 | u8 dt_addr[1] = { M41T80_REG_SEC }; | |
125 | struct i2c_msg msgs_in[] = { | |
126 | { | |
127 | .addr = client->addr, | |
128 | .flags = 0, | |
129 | .len = 1, | |
130 | .buf = dt_addr, | |
131 | }, | |
132 | { | |
133 | .addr = client->addr, | |
134 | .flags = I2C_M_RD, | |
135 | .len = M41T80_DATETIME_REG_SIZE - M41T80_REG_SEC, | |
136 | .buf = buf + M41T80_REG_SEC, | |
137 | }, | |
138 | }; | |
139 | struct i2c_msg msgs[] = { | |
140 | { | |
141 | .addr = client->addr, | |
142 | .flags = 0, | |
143 | .len = 1 + M41T80_DATETIME_REG_SIZE, | |
144 | .buf = wbuf, | |
145 | }, | |
146 | }; | |
147 | ||
148 | /* Read current reg values into buf[1..7] */ | |
149 | if (i2c_transfer(client->adapter, msgs_in, 2) < 0) { | |
150 | dev_err(&client->dev, "read error\n"); | |
151 | return -EIO; | |
152 | } | |
153 | ||
154 | wbuf[0] = 0; /* offset into rtc's regs */ | |
155 | /* Merge time-data and register flags into buf[0..7] */ | |
156 | buf[M41T80_REG_SSEC] = 0; | |
157 | buf[M41T80_REG_SEC] = | |
158 | BIN2BCD(tm->tm_sec) | (buf[M41T80_REG_SEC] & ~0x7f); | |
159 | buf[M41T80_REG_MIN] = | |
160 | BIN2BCD(tm->tm_min) | (buf[M41T80_REG_MIN] & ~0x7f); | |
161 | buf[M41T80_REG_HOUR] = | |
162 | BIN2BCD(tm->tm_hour) | (buf[M41T80_REG_HOUR] & ~0x3f) ; | |
163 | buf[M41T80_REG_WDAY] = | |
164 | (tm->tm_wday & 0x07) | (buf[M41T80_REG_WDAY] & ~0x07); | |
165 | buf[M41T80_REG_DAY] = | |
166 | BIN2BCD(tm->tm_mday) | (buf[M41T80_REG_DAY] & ~0x3f); | |
167 | buf[M41T80_REG_MON] = | |
168 | BIN2BCD(tm->tm_mon + 1) | (buf[M41T80_REG_MON] & ~0x1f); | |
169 | /* assume 20YY not 19YY */ | |
170 | buf[M41T80_REG_YEAR] = BIN2BCD(tm->tm_year % 100); | |
171 | ||
172 | if (i2c_transfer(client->adapter, msgs, 1) != 1) { | |
173 | dev_err(&client->dev, "write error\n"); | |
174 | return -EIO; | |
175 | } | |
176 | return 0; | |
177 | } | |
178 | ||
179 | #if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE) | |
180 | static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq) | |
181 | { | |
182 | struct i2c_client *client = to_i2c_client(dev); | |
183 | struct m41t80_data *clientdata = i2c_get_clientdata(client); | |
184 | u8 reg; | |
185 | ||
3760f736 | 186 | if (clientdata->features & M41T80_FEATURE_BL) { |
caaff562 AN |
187 | reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); |
188 | seq_printf(seq, "battery\t\t: %s\n", | |
189 | (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok"); | |
190 | } | |
191 | return 0; | |
192 | } | |
193 | #else | |
194 | #define m41t80_rtc_proc NULL | |
195 | #endif | |
196 | ||
197 | static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
198 | { | |
199 | return m41t80_get_datetime(to_i2c_client(dev), tm); | |
200 | } | |
201 | ||
202 | static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
203 | { | |
204 | return m41t80_set_datetime(to_i2c_client(dev), tm); | |
205 | } | |
206 | ||
207 | #if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE) | |
208 | static int | |
209 | m41t80_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) | |
210 | { | |
211 | struct i2c_client *client = to_i2c_client(dev); | |
212 | int rc; | |
213 | ||
214 | switch (cmd) { | |
215 | case RTC_AIE_OFF: | |
216 | case RTC_AIE_ON: | |
217 | break; | |
218 | default: | |
219 | return -ENOIOCTLCMD; | |
220 | } | |
221 | ||
222 | rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); | |
223 | if (rc < 0) | |
224 | goto err; | |
225 | switch (cmd) { | |
226 | case RTC_AIE_OFF: | |
227 | rc &= ~M41T80_ALMON_AFE; | |
228 | break; | |
229 | case RTC_AIE_ON: | |
230 | rc |= M41T80_ALMON_AFE; | |
231 | break; | |
232 | } | |
233 | if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, rc) < 0) | |
234 | goto err; | |
235 | return 0; | |
236 | err: | |
237 | return -EIO; | |
238 | } | |
239 | #else | |
240 | #define m41t80_rtc_ioctl NULL | |
241 | #endif | |
242 | ||
243 | static int m41t80_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *t) | |
244 | { | |
245 | struct i2c_client *client = to_i2c_client(dev); | |
246 | u8 wbuf[1 + M41T80_ALARM_REG_SIZE]; | |
247 | u8 *buf = &wbuf[1]; | |
248 | u8 *reg = buf - M41T80_REG_ALARM_MON; | |
249 | u8 dt_addr[1] = { M41T80_REG_ALARM_MON }; | |
250 | struct i2c_msg msgs_in[] = { | |
251 | { | |
252 | .addr = client->addr, | |
253 | .flags = 0, | |
254 | .len = 1, | |
255 | .buf = dt_addr, | |
256 | }, | |
257 | { | |
258 | .addr = client->addr, | |
259 | .flags = I2C_M_RD, | |
260 | .len = M41T80_ALARM_REG_SIZE, | |
261 | .buf = buf, | |
262 | }, | |
263 | }; | |
264 | struct i2c_msg msgs[] = { | |
265 | { | |
266 | .addr = client->addr, | |
267 | .flags = 0, | |
268 | .len = 1 + M41T80_ALARM_REG_SIZE, | |
269 | .buf = wbuf, | |
270 | }, | |
271 | }; | |
272 | ||
273 | if (i2c_transfer(client->adapter, msgs_in, 2) < 0) { | |
274 | dev_err(&client->dev, "read error\n"); | |
275 | return -EIO; | |
276 | } | |
277 | reg[M41T80_REG_ALARM_MON] &= ~(0x1f | M41T80_ALMON_AFE); | |
278 | reg[M41T80_REG_ALARM_DAY] = 0; | |
279 | reg[M41T80_REG_ALARM_HOUR] &= ~(0x3f | 0x80); | |
280 | reg[M41T80_REG_ALARM_MIN] = 0; | |
281 | reg[M41T80_REG_ALARM_SEC] = 0; | |
282 | ||
283 | wbuf[0] = M41T80_REG_ALARM_MON; /* offset into rtc's regs */ | |
284 | reg[M41T80_REG_ALARM_SEC] |= t->time.tm_sec >= 0 ? | |
285 | BIN2BCD(t->time.tm_sec) : 0x80; | |
286 | reg[M41T80_REG_ALARM_MIN] |= t->time.tm_min >= 0 ? | |
287 | BIN2BCD(t->time.tm_min) : 0x80; | |
288 | reg[M41T80_REG_ALARM_HOUR] |= t->time.tm_hour >= 0 ? | |
289 | BIN2BCD(t->time.tm_hour) : 0x80; | |
290 | reg[M41T80_REG_ALARM_DAY] |= t->time.tm_mday >= 0 ? | |
291 | BIN2BCD(t->time.tm_mday) : 0x80; | |
292 | if (t->time.tm_mon >= 0) | |
293 | reg[M41T80_REG_ALARM_MON] |= BIN2BCD(t->time.tm_mon + 1); | |
294 | else | |
295 | reg[M41T80_REG_ALARM_DAY] |= 0x40; | |
296 | ||
297 | if (i2c_transfer(client->adapter, msgs, 1) != 1) { | |
298 | dev_err(&client->dev, "write error\n"); | |
299 | return -EIO; | |
300 | } | |
301 | ||
302 | if (t->enabled) { | |
303 | reg[M41T80_REG_ALARM_MON] |= M41T80_ALMON_AFE; | |
304 | if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, | |
305 | reg[M41T80_REG_ALARM_MON]) < 0) { | |
306 | dev_err(&client->dev, "write error\n"); | |
307 | return -EIO; | |
308 | } | |
309 | } | |
310 | return 0; | |
311 | } | |
312 | ||
313 | static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t) | |
314 | { | |
315 | struct i2c_client *client = to_i2c_client(dev); | |
316 | u8 buf[M41T80_ALARM_REG_SIZE + 1]; /* all alarm regs and flags */ | |
317 | u8 dt_addr[1] = { M41T80_REG_ALARM_MON }; | |
318 | u8 *reg = buf - M41T80_REG_ALARM_MON; | |
319 | struct i2c_msg msgs[] = { | |
320 | { | |
321 | .addr = client->addr, | |
322 | .flags = 0, | |
323 | .len = 1, | |
324 | .buf = dt_addr, | |
325 | }, | |
326 | { | |
327 | .addr = client->addr, | |
328 | .flags = I2C_M_RD, | |
329 | .len = M41T80_ALARM_REG_SIZE + 1, | |
330 | .buf = buf, | |
331 | }, | |
332 | }; | |
333 | ||
334 | if (i2c_transfer(client->adapter, msgs, 2) < 0) { | |
335 | dev_err(&client->dev, "read error\n"); | |
336 | return -EIO; | |
337 | } | |
338 | t->time.tm_sec = -1; | |
339 | t->time.tm_min = -1; | |
340 | t->time.tm_hour = -1; | |
341 | t->time.tm_mday = -1; | |
342 | t->time.tm_mon = -1; | |
343 | if (!(reg[M41T80_REG_ALARM_SEC] & 0x80)) | |
344 | t->time.tm_sec = BCD2BIN(reg[M41T80_REG_ALARM_SEC] & 0x7f); | |
345 | if (!(reg[M41T80_REG_ALARM_MIN] & 0x80)) | |
346 | t->time.tm_min = BCD2BIN(reg[M41T80_REG_ALARM_MIN] & 0x7f); | |
347 | if (!(reg[M41T80_REG_ALARM_HOUR] & 0x80)) | |
348 | t->time.tm_hour = BCD2BIN(reg[M41T80_REG_ALARM_HOUR] & 0x3f); | |
349 | if (!(reg[M41T80_REG_ALARM_DAY] & 0x80)) | |
350 | t->time.tm_mday = BCD2BIN(reg[M41T80_REG_ALARM_DAY] & 0x3f); | |
351 | if (!(reg[M41T80_REG_ALARM_DAY] & 0x40)) | |
352 | t->time.tm_mon = BCD2BIN(reg[M41T80_REG_ALARM_MON] & 0x1f) - 1; | |
353 | t->time.tm_year = -1; | |
354 | t->time.tm_wday = -1; | |
355 | t->time.tm_yday = -1; | |
356 | t->time.tm_isdst = -1; | |
357 | t->enabled = !!(reg[M41T80_REG_ALARM_MON] & M41T80_ALMON_AFE); | |
358 | t->pending = !!(reg[M41T80_REG_FLAGS] & M41T80_FLAGS_AF); | |
359 | return 0; | |
360 | } | |
361 | ||
362 | static struct rtc_class_ops m41t80_rtc_ops = { | |
363 | .read_time = m41t80_rtc_read_time, | |
364 | .set_time = m41t80_rtc_set_time, | |
365 | .read_alarm = m41t80_rtc_read_alarm, | |
366 | .set_alarm = m41t80_rtc_set_alarm, | |
367 | .proc = m41t80_rtc_proc, | |
368 | .ioctl = m41t80_rtc_ioctl, | |
369 | }; | |
370 | ||
371 | #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE) | |
372 | static ssize_t m41t80_sysfs_show_flags(struct device *dev, | |
373 | struct device_attribute *attr, char *buf) | |
374 | { | |
375 | struct i2c_client *client = to_i2c_client(dev); | |
376 | int val; | |
377 | ||
378 | val = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); | |
379 | if (val < 0) | |
380 | return -EIO; | |
381 | return sprintf(buf, "%#x\n", val); | |
382 | } | |
383 | static DEVICE_ATTR(flags, S_IRUGO, m41t80_sysfs_show_flags, NULL); | |
384 | ||
385 | static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev, | |
386 | struct device_attribute *attr, char *buf) | |
387 | { | |
388 | struct i2c_client *client = to_i2c_client(dev); | |
389 | int val; | |
390 | ||
391 | val = i2c_smbus_read_byte_data(client, M41T80_REG_SQW); | |
392 | if (val < 0) | |
393 | return -EIO; | |
394 | val = (val >> 4) & 0xf; | |
395 | switch (val) { | |
396 | case 0: | |
397 | break; | |
398 | case 1: | |
399 | val = 32768; | |
400 | break; | |
401 | default: | |
402 | val = 32768 >> val; | |
403 | } | |
404 | return sprintf(buf, "%d\n", val); | |
405 | } | |
406 | static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev, | |
407 | struct device_attribute *attr, | |
408 | const char *buf, size_t count) | |
409 | { | |
410 | struct i2c_client *client = to_i2c_client(dev); | |
411 | int almon, sqw; | |
412 | int val = simple_strtoul(buf, NULL, 0); | |
413 | ||
414 | if (val) { | |
415 | if (!is_power_of_2(val)) | |
416 | return -EINVAL; | |
417 | val = ilog2(val); | |
418 | if (val == 15) | |
419 | val = 1; | |
420 | else if (val < 14) | |
421 | val = 15 - val; | |
422 | else | |
423 | return -EINVAL; | |
424 | } | |
425 | /* disable SQW, set SQW frequency & re-enable */ | |
426 | almon = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); | |
427 | if (almon < 0) | |
428 | return -EIO; | |
429 | sqw = i2c_smbus_read_byte_data(client, M41T80_REG_SQW); | |
430 | if (sqw < 0) | |
431 | return -EIO; | |
432 | sqw = (sqw & 0x0f) | (val << 4); | |
433 | if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, | |
434 | almon & ~M41T80_ALMON_SQWE) < 0 || | |
435 | i2c_smbus_write_byte_data(client, M41T80_REG_SQW, sqw) < 0) | |
436 | return -EIO; | |
437 | if (val && i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, | |
438 | almon | M41T80_ALMON_SQWE) < 0) | |
439 | return -EIO; | |
440 | return count; | |
441 | } | |
442 | static DEVICE_ATTR(sqwfreq, S_IRUGO | S_IWUSR, | |
443 | m41t80_sysfs_show_sqwfreq, m41t80_sysfs_set_sqwfreq); | |
444 | ||
445 | static struct attribute *attrs[] = { | |
446 | &dev_attr_flags.attr, | |
447 | &dev_attr_sqwfreq.attr, | |
448 | NULL, | |
449 | }; | |
450 | static struct attribute_group attr_group = { | |
451 | .attrs = attrs, | |
452 | }; | |
453 | ||
454 | static int m41t80_sysfs_register(struct device *dev) | |
455 | { | |
456 | return sysfs_create_group(&dev->kobj, &attr_group); | |
457 | } | |
458 | #else | |
459 | static int m41t80_sysfs_register(struct device *dev) | |
460 | { | |
461 | return 0; | |
462 | } | |
463 | #endif | |
464 | ||
617780d2 AN |
465 | #ifdef CONFIG_RTC_DRV_M41T80_WDT |
466 | /* | |
467 | ***************************************************************************** | |
468 | * | |
469 | * Watchdog Driver | |
470 | * | |
471 | ***************************************************************************** | |
472 | */ | |
473 | static struct i2c_client *save_client; | |
474 | ||
475 | /* Default margin */ | |
476 | #define WD_TIMO 60 /* 1..31 seconds */ | |
477 | ||
478 | static int wdt_margin = WD_TIMO; | |
479 | module_param(wdt_margin, int, 0); | |
480 | MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)"); | |
481 | ||
482 | static unsigned long wdt_is_open; | |
483 | static int boot_flag; | |
484 | ||
485 | /** | |
486 | * wdt_ping: | |
487 | * | |
488 | * Reload counter one with the watchdog timeout. We don't bother reloading | |
489 | * the cascade counter. | |
490 | */ | |
491 | static void wdt_ping(void) | |
492 | { | |
493 | unsigned char i2c_data[2]; | |
494 | struct i2c_msg msgs1[1] = { | |
495 | { | |
496 | .addr = save_client->addr, | |
497 | .flags = 0, | |
498 | .len = 2, | |
499 | .buf = i2c_data, | |
500 | }, | |
501 | }; | |
502 | i2c_data[0] = 0x09; /* watchdog register */ | |
503 | ||
504 | if (wdt_margin > 31) | |
505 | i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */ | |
506 | else | |
507 | /* | |
508 | * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02) | |
509 | */ | |
510 | i2c_data[1] = wdt_margin<<2 | 0x82; | |
511 | ||
512 | i2c_transfer(save_client->adapter, msgs1, 1); | |
513 | } | |
514 | ||
515 | /** | |
516 | * wdt_disable: | |
517 | * | |
518 | * disables watchdog. | |
519 | */ | |
520 | static void wdt_disable(void) | |
521 | { | |
522 | unsigned char i2c_data[2], i2c_buf[0x10]; | |
523 | struct i2c_msg msgs0[2] = { | |
524 | { | |
525 | .addr = save_client->addr, | |
526 | .flags = 0, | |
527 | .len = 1, | |
528 | .buf = i2c_data, | |
529 | }, | |
530 | { | |
531 | .addr = save_client->addr, | |
532 | .flags = I2C_M_RD, | |
533 | .len = 1, | |
534 | .buf = i2c_buf, | |
535 | }, | |
536 | }; | |
537 | struct i2c_msg msgs1[1] = { | |
538 | { | |
539 | .addr = save_client->addr, | |
540 | .flags = 0, | |
541 | .len = 2, | |
542 | .buf = i2c_data, | |
543 | }, | |
544 | }; | |
545 | ||
546 | i2c_data[0] = 0x09; | |
547 | i2c_transfer(save_client->adapter, msgs0, 2); | |
548 | ||
549 | i2c_data[0] = 0x09; | |
550 | i2c_data[1] = 0x00; | |
551 | i2c_transfer(save_client->adapter, msgs1, 1); | |
552 | } | |
553 | ||
554 | /** | |
555 | * wdt_write: | |
556 | * @file: file handle to the watchdog | |
557 | * @buf: buffer to write (unused as data does not matter here | |
558 | * @count: count of bytes | |
559 | * @ppos: pointer to the position to write. No seeks allowed | |
560 | * | |
561 | * A write to a watchdog device is defined as a keepalive signal. Any | |
562 | * write of data will do, as we we don't define content meaning. | |
563 | */ | |
564 | static ssize_t wdt_write(struct file *file, const char __user *buf, | |
565 | size_t count, loff_t *ppos) | |
566 | { | |
567 | /* Can't seek (pwrite) on this device | |
568 | if (ppos != &file->f_pos) | |
569 | return -ESPIPE; | |
570 | */ | |
571 | if (count) { | |
572 | wdt_ping(); | |
573 | return 1; | |
574 | } | |
575 | return 0; | |
576 | } | |
577 | ||
578 | static ssize_t wdt_read(struct file *file, char __user *buf, | |
579 | size_t count, loff_t *ppos) | |
580 | { | |
581 | return 0; | |
582 | } | |
583 | ||
584 | /** | |
585 | * wdt_ioctl: | |
586 | * @inode: inode of the device | |
587 | * @file: file handle to the device | |
588 | * @cmd: watchdog command | |
589 | * @arg: argument pointer | |
590 | * | |
591 | * The watchdog API defines a common set of functions for all watchdogs | |
592 | * according to their available features. We only actually usefully support | |
593 | * querying capabilities and current status. | |
594 | */ | |
595 | static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, | |
596 | unsigned long arg) | |
597 | { | |
598 | int new_margin, rv; | |
599 | static struct watchdog_info ident = { | |
600 | .options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING | | |
601 | WDIOF_SETTIMEOUT, | |
602 | .firmware_version = 1, | |
603 | .identity = "M41T80 WTD" | |
604 | }; | |
605 | ||
606 | switch (cmd) { | |
607 | case WDIOC_GETSUPPORT: | |
608 | return copy_to_user((struct watchdog_info __user *)arg, &ident, | |
609 | sizeof(ident)) ? -EFAULT : 0; | |
610 | ||
611 | case WDIOC_GETSTATUS: | |
612 | case WDIOC_GETBOOTSTATUS: | |
613 | return put_user(boot_flag, (int __user *)arg); | |
614 | case WDIOC_KEEPALIVE: | |
615 | wdt_ping(); | |
616 | return 0; | |
617 | case WDIOC_SETTIMEOUT: | |
618 | if (get_user(new_margin, (int __user *)arg)) | |
619 | return -EFAULT; | |
620 | /* Arbitrary, can't find the card's limits */ | |
621 | if (new_margin < 1 || new_margin > 124) | |
622 | return -EINVAL; | |
623 | wdt_margin = new_margin; | |
624 | wdt_ping(); | |
625 | /* Fall */ | |
626 | case WDIOC_GETTIMEOUT: | |
627 | return put_user(wdt_margin, (int __user *)arg); | |
628 | ||
629 | case WDIOC_SETOPTIONS: | |
630 | if (copy_from_user(&rv, (int __user *)arg, sizeof(int))) | |
631 | return -EFAULT; | |
632 | ||
633 | if (rv & WDIOS_DISABLECARD) { | |
4c228db0 | 634 | pr_info("rtc-m41t80: disable watchdog\n"); |
617780d2 AN |
635 | wdt_disable(); |
636 | } | |
637 | ||
638 | if (rv & WDIOS_ENABLECARD) { | |
4c228db0 | 639 | pr_info("rtc-m41t80: enable watchdog\n"); |
617780d2 AN |
640 | wdt_ping(); |
641 | } | |
642 | ||
643 | return -EINVAL; | |
644 | } | |
645 | return -ENOTTY; | |
646 | } | |
647 | ||
648 | /** | |
649 | * wdt_open: | |
650 | * @inode: inode of device | |
651 | * @file: file handle to device | |
652 | * | |
653 | */ | |
654 | static int wdt_open(struct inode *inode, struct file *file) | |
655 | { | |
656 | if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { | |
41012735 AB |
657 | lock_kernel(); |
658 | if (test_and_set_bit(0, &wdt_is_open)) { | |
659 | unlock_kernel(); | |
617780d2 | 660 | return -EBUSY; |
41012735 | 661 | } |
617780d2 AN |
662 | /* |
663 | * Activate | |
664 | */ | |
665 | wdt_is_open = 1; | |
41012735 | 666 | unlock_kernel(); |
617780d2 AN |
667 | return 0; |
668 | } | |
669 | return -ENODEV; | |
670 | } | |
671 | ||
672 | /** | |
673 | * wdt_close: | |
674 | * @inode: inode to board | |
675 | * @file: file handle to board | |
676 | * | |
677 | */ | |
678 | static int wdt_release(struct inode *inode, struct file *file) | |
679 | { | |
680 | if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) | |
681 | clear_bit(0, &wdt_is_open); | |
682 | return 0; | |
683 | } | |
684 | ||
685 | /** | |
686 | * notify_sys: | |
687 | * @this: our notifier block | |
688 | * @code: the event being reported | |
689 | * @unused: unused | |
690 | * | |
691 | * Our notifier is called on system shutdowns. We want to turn the card | |
692 | * off at reboot otherwise the machine will reboot again during memory | |
693 | * test or worse yet during the following fsck. This would suck, in fact | |
694 | * trust me - if it happens it does suck. | |
695 | */ | |
696 | static int wdt_notify_sys(struct notifier_block *this, unsigned long code, | |
697 | void *unused) | |
698 | { | |
699 | if (code == SYS_DOWN || code == SYS_HALT) | |
700 | /* Disable Watchdog */ | |
701 | wdt_disable(); | |
702 | return NOTIFY_DONE; | |
703 | } | |
704 | ||
705 | static const struct file_operations wdt_fops = { | |
706 | .owner = THIS_MODULE, | |
707 | .read = wdt_read, | |
708 | .ioctl = wdt_ioctl, | |
709 | .write = wdt_write, | |
710 | .open = wdt_open, | |
711 | .release = wdt_release, | |
712 | }; | |
713 | ||
714 | static struct miscdevice wdt_dev = { | |
715 | .minor = WATCHDOG_MINOR, | |
716 | .name = "watchdog", | |
717 | .fops = &wdt_fops, | |
718 | }; | |
719 | ||
720 | /* | |
721 | * The WDT card needs to learn about soft shutdowns in order to | |
722 | * turn the timebomb registers off. | |
723 | */ | |
724 | static struct notifier_block wdt_notifier = { | |
725 | .notifier_call = wdt_notify_sys, | |
726 | }; | |
727 | #endif /* CONFIG_RTC_DRV_M41T80_WDT */ | |
728 | ||
caaff562 AN |
729 | /* |
730 | ***************************************************************************** | |
731 | * | |
732 | * Driver Interface | |
733 | * | |
734 | ***************************************************************************** | |
735 | */ | |
d2653e92 JD |
736 | static int m41t80_probe(struct i2c_client *client, |
737 | const struct i2c_device_id *id) | |
caaff562 | 738 | { |
3760f736 | 739 | int rc = 0; |
caaff562 AN |
740 | struct rtc_device *rtc = NULL; |
741 | struct rtc_time tm; | |
caaff562 AN |
742 | struct m41t80_data *clientdata = NULL; |
743 | ||
744 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | |
745 | | I2C_FUNC_SMBUS_BYTE_DATA)) { | |
746 | rc = -ENODEV; | |
747 | goto exit; | |
748 | } | |
749 | ||
750 | dev_info(&client->dev, | |
751 | "chip found, driver version " DRV_VERSION "\n"); | |
752 | ||
caaff562 AN |
753 | clientdata = kzalloc(sizeof(*clientdata), GFP_KERNEL); |
754 | if (!clientdata) { | |
755 | rc = -ENOMEM; | |
756 | goto exit; | |
757 | } | |
758 | ||
759 | rtc = rtc_device_register(client->name, &client->dev, | |
760 | &m41t80_rtc_ops, THIS_MODULE); | |
761 | if (IS_ERR(rtc)) { | |
762 | rc = PTR_ERR(rtc); | |
763 | rtc = NULL; | |
764 | goto exit; | |
765 | } | |
766 | ||
767 | clientdata->rtc = rtc; | |
3760f736 | 768 | clientdata->features = id->driver_data; |
caaff562 AN |
769 | i2c_set_clientdata(client, clientdata); |
770 | ||
771 | /* Make sure HT (Halt Update) bit is cleared */ | |
772 | rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR); | |
773 | if (rc < 0) | |
774 | goto ht_err; | |
775 | ||
776 | if (rc & M41T80_ALHOUR_HT) { | |
3760f736 | 777 | if (clientdata->features & M41T80_FEATURE_HT) { |
caaff562 AN |
778 | m41t80_get_datetime(client, &tm); |
779 | dev_info(&client->dev, "HT bit was set!\n"); | |
780 | dev_info(&client->dev, | |
781 | "Power Down at " | |
782 | "%04i-%02i-%02i %02i:%02i:%02i\n", | |
783 | tm.tm_year + 1900, | |
784 | tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, | |
785 | tm.tm_min, tm.tm_sec); | |
786 | } | |
787 | if (i2c_smbus_write_byte_data(client, | |
788 | M41T80_REG_ALARM_HOUR, | |
789 | rc & ~M41T80_ALHOUR_HT) < 0) | |
790 | goto ht_err; | |
791 | } | |
792 | ||
793 | /* Make sure ST (stop) bit is cleared */ | |
794 | rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC); | |
795 | if (rc < 0) | |
796 | goto st_err; | |
797 | ||
798 | if (rc & M41T80_SEC_ST) { | |
799 | if (i2c_smbus_write_byte_data(client, M41T80_REG_SEC, | |
800 | rc & ~M41T80_SEC_ST) < 0) | |
801 | goto st_err; | |
802 | } | |
803 | ||
804 | rc = m41t80_sysfs_register(&client->dev); | |
805 | if (rc) | |
806 | goto exit; | |
807 | ||
617780d2 | 808 | #ifdef CONFIG_RTC_DRV_M41T80_WDT |
3760f736 | 809 | if (clientdata->features & M41T80_FEATURE_HT) { |
417607d0 | 810 | save_client = client; |
617780d2 AN |
811 | rc = misc_register(&wdt_dev); |
812 | if (rc) | |
813 | goto exit; | |
814 | rc = register_reboot_notifier(&wdt_notifier); | |
815 | if (rc) { | |
816 | misc_deregister(&wdt_dev); | |
817 | goto exit; | |
818 | } | |
617780d2 AN |
819 | } |
820 | #endif | |
caaff562 AN |
821 | return 0; |
822 | ||
823 | st_err: | |
824 | rc = -EIO; | |
825 | dev_err(&client->dev, "Can't clear ST bit\n"); | |
826 | goto exit; | |
827 | ht_err: | |
828 | rc = -EIO; | |
829 | dev_err(&client->dev, "Can't clear HT bit\n"); | |
830 | goto exit; | |
831 | ||
832 | exit: | |
833 | if (rtc) | |
834 | rtc_device_unregister(rtc); | |
835 | kfree(clientdata); | |
836 | return rc; | |
837 | } | |
838 | ||
839 | static int m41t80_remove(struct i2c_client *client) | |
840 | { | |
841 | struct m41t80_data *clientdata = i2c_get_clientdata(client); | |
842 | struct rtc_device *rtc = clientdata->rtc; | |
843 | ||
617780d2 | 844 | #ifdef CONFIG_RTC_DRV_M41T80_WDT |
3760f736 | 845 | if (clientdata->features & M41T80_FEATURE_HT) { |
617780d2 AN |
846 | misc_deregister(&wdt_dev); |
847 | unregister_reboot_notifier(&wdt_notifier); | |
848 | } | |
849 | #endif | |
caaff562 AN |
850 | if (rtc) |
851 | rtc_device_unregister(rtc); | |
852 | kfree(clientdata); | |
853 | ||
854 | return 0; | |
855 | } | |
856 | ||
857 | static struct i2c_driver m41t80_driver = { | |
858 | .driver = { | |
afe1ab4d | 859 | .name = "rtc-m41t80", |
caaff562 AN |
860 | }, |
861 | .probe = m41t80_probe, | |
862 | .remove = m41t80_remove, | |
3760f736 | 863 | .id_table = m41t80_id, |
caaff562 AN |
864 | }; |
865 | ||
866 | static int __init m41t80_rtc_init(void) | |
867 | { | |
868 | return i2c_add_driver(&m41t80_driver); | |
869 | } | |
870 | ||
871 | static void __exit m41t80_rtc_exit(void) | |
872 | { | |
873 | i2c_del_driver(&m41t80_driver); | |
874 | } | |
875 | ||
876 | MODULE_AUTHOR("Alexander Bigga <[email protected]>"); | |
877 | MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver"); | |
878 | MODULE_LICENSE("GPL"); | |
879 | MODULE_VERSION(DRV_VERSION); | |
880 | ||
881 | module_init(m41t80_rtc_init); | |
882 | module_exit(m41t80_rtc_exit); |