[linux.git] / drivers / atm / suni.h

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * drivers/atm/suni.h - S/UNI PHY driver
 */
 
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */

#ifndef DRIVER_ATM_SUNI_H
#define DRIVER_ATM_SUNI_H

#include <linux/atmdev.h>
#include <linux/atmioc.h>
#include <linux/sonet.h>

/* SUNI registers */

#define SUNI_MRI		0x00	/* Master Reset and Identity / Load
					   Meter */
#define SUNI_MC			0x01	/* Master Configuration */
#define SUNI_MIS		0x02	/* Master Interrupt Status */
			  /* no 0x03 */
#define SUNI_MCM		0x04	/* Master Clock Monitor */
#define SUNI_MCT		0x05	/* Master Control */
#define SUNI_CSCS		0x06	/* Clock Synthesis Control and Status */
#define SUNI_CRCS		0x07	/* Clock Recovery Control and Status */
			     /* 0x08-0x0F reserved */
#define SUNI_RSOP_CIE		0x10	/* RSOP Control/Interrupt Enable */
#define SUNI_RSOP_SIS		0x11	/* RSOP Status/Interrupt Status */
#define SUNI_RSOP_SBL		0x12	/* RSOP Section BIP-8 LSB */
#define SUNI_RSOP_SBM		0x13	/* RSOP Section BIP-8 MSB */
#define SUNI_TSOP_CTRL		0x14	/* TSOP Control */
#define SUNI_TSOP_DIAG		0x15	/* TSOP Diagnostic */
			     /* 0x16-0x17 reserved */
#define SUNI_RLOP_CS		0x18	/* RLOP Control/Status */
#define SUNI_RLOP_IES		0x19	/* RLOP Interrupt Enable/Status */
#define SUNI_RLOP_LBL		0x1A	/* RLOP Line BIP-8/24 LSB */
#define SUNI_RLOP_LB		0x1B	/* RLOP Line BIP-8/24 */
#define SUNI_RLOP_LBM		0x1C	/* RLOP Line BIP-8/24 MSB */
#define SUNI_RLOP_LFL		0x1D	/* RLOP Line FEBE LSB */
#define SUNI_RLOP_LF 		0x1E	/* RLOP Line FEBE */
#define SUNI_RLOP_LFM		0x1F	/* RLOP Line FEBE MSB */
#define SUNI_TLOP_CTRL		0x20	/* TLOP Control */
#define SUNI_TLOP_DIAG		0x21	/* TLOP Diagnostic */
			     /* 0x22-0x27 reserved */
#define SUNI_SSTB_CTRL		0x28
#define SUNI_RPOP_SC		0x30	/* RPOP Status/Control */
#define SUNI_RPOP_IS		0x31	/* RPOP Interrupt Status */
			     /* 0x32 reserved */
#define SUNI_RPOP_IE		0x33	/* RPOP Interrupt Enable */
			     /* 0x34-0x36 reserved */
#define SUNI_RPOP_PSL		0x37	/* RPOP Path Signal Label */
#define SUNI_RPOP_PBL		0x38	/* RPOP Path BIP-8 LSB */
#define SUNI_RPOP_PBM		0x39	/* RPOP Path BIP-8 MSB */
#define SUNI_RPOP_PFL		0x3A	/* RPOP Path FEBE LSB */
#define SUNI_RPOP_PFM		0x3B	/* RPOP Path FEBE MSB */
			     /* 0x3C reserved */
#define SUNI_RPOP_PBC		0x3D	/* RPOP Path BIP-8 Configuration */
#define SUNI_RPOP_RC		0x3D	/* RPOP Ring Control (PM5355) */
			     /* 0x3E-0x3F reserved */
#define SUNI_TPOP_CD		0x40	/* TPOP Control/Diagnostic */
#define SUNI_TPOP_PC		0x41	/* TPOP Pointer Control */
			     /* 0x42-0x44 reserved */
#define SUNI_TPOP_APL		0x45	/* TPOP Arbitrary Pointer LSB */
#define SUNI_TPOP_APM		0x46	/* TPOP Arbitrary Pointer MSB */
			     /* 0x47 reserved */
#define SUNI_TPOP_PSL		0x48	/* TPOP Path Signal Label */
#define SUNI_TPOP_PS		0x49	/* TPOP Path Status */
			     /* 0x4A-0x4F reserved */
#define SUNI_RACP_CS		0x50	/* RACP Control/Status */
#define SUNI_RACP_IES		0x51	/* RACP Interrupt Enable/Status */
#define SUNI_RACP_MHP		0x52	/* RACP Match Header Pattern */
#define SUNI_RACP_MHM		0x53	/* RACP Match Header Mask */
#define SUNI_RACP_CHEC		0x54	/* RACP Correctable HCS Error Count */
#define SUNI_RACP_UHEC		0x55	/* RACP Uncorrectable HCS Err Count */
#define SUNI_RACP_RCCL		0x56	/* RACP Receive Cell Counter LSB */
#define SUNI_RACP_RCC		0x57	/* RACP Receive Cell Counter */
#define SUNI_RACP_RCCM		0x58	/* RACP Receive Cell Counter MSB */
#define SUNI_RACP_CFG		0x59	/* RACP Configuration */
			     /* 0x5A-0x5F reserved */
#define SUNI_TACP_CS		0x60	/* TACP Control/Status */
#define SUNI_TACP_IUCHP		0x61	/* TACP Idle/Unassigned Cell Hdr Pat */
#define SUNI_TACP_IUCPOP	0x62	/* TACP Idle/Unassigned Cell Payload
					   Octet Pattern */
#define SUNI_TACP_FIFO		0x63	/* TACP FIFO Configuration */
#define SUNI_TACP_TCCL		0x64	/* TACP Transmit Cell Counter LSB */
#define SUNI_TACP_TCC		0x65	/* TACP Transmit Cell Counter */
#define SUNI_TACP_TCCM		0x66	/* TACP Transmit Cell Counter MSB */
#define SUNI_TACP_CFG		0x67	/* TACP Configuration */
#define SUNI_SPTB_CTRL		0x68	/* SPTB Control */
			     /* 0x69-0x7F reserved */
#define	SUNI_MT			0x80	/* Master Test */
			     /* 0x81-0xFF reserved */

/* SUNI register values */


/* MRI is reg 0 */
#define SUNI_MRI_ID		0x0f	/* R, SUNI revision number */
#define SUNI_MRI_ID_SHIFT 	0
#define SUNI_MRI_TYPE		0x70	/* R, SUNI type (lite is 011) */
#define SUNI_MRI_TYPE_SHIFT 	4
#define SUNI_MRI_TYPE_PM5346	0x3	/* S/UNI 155 LITE */
#define SUNI_MRI_TYPE_PM5347	0x4	/* S/UNI 155 PLUS */
#define SUNI_MRI_TYPE_PM5350	0x7	/* S/UNI 155 ULTRA */
#define SUNI_MRI_TYPE_PM5355	0x1	/* S/UNI 622 */
#define SUNI_MRI_RESET		0x80	/* RW, reset & power down chip
					   0: normal operation
					   1: reset & low power */

/* MCM is reg 0x4 */
#define SUNI_MCM_LLE		0x20	/* line loopback (PM5355) */
#define SUNI_MCM_DLE		0x10	/* diagnostic loopback (PM5355) */

/* MCT is reg 5 */
#define SUNI_MCT_LOOPT		0x01	/* RW, timing source, 0: from
					   TRCLK+/- */
#define SUNI_MCT_DLE		0x02	/* RW, diagnostic loopback */
#define SUNI_MCT_LLE		0x04	/* RW, line loopback */
#define SUNI_MCT_FIXPTR		0x20	/* RW, disable transmit payload pointer
					   adjustments
					   0: payload ptr controlled by TPOP
					      ptr control reg
					   1: payload pointer fixed at 522 */
#define SUNI_MCT_LCDV		0x40	/* R, loss of cell delineation */
#define SUNI_MCT_LCDE		0x80	/* RW, loss of cell delineation
					   interrupt (1: on) */
/* RSOP_CIE is reg 0x10 */
#define SUNI_RSOP_CIE_OOFE	0x01	/* RW, enable interrupt on frame alarm
					   state change */
#define SUNI_RSOP_CIE_LOFE	0x02	/* RW, enable interrupt on loss of
					   frame state change */
#define SUNI_RSOP_CIE_LOSE	0x04	/* RW, enable interrupt on loss of
					   signal state change */
#define SUNI_RSOP_CIE_BIPEE	0x08	/* RW, enable interrupt on section
					   BIP-8 error (B1) */
#define SUNI_RSOP_CIE_FOOF	0x20	/* W, force RSOP out of frame at next
					   boundary */
#define SUNI_RSOP_CIE_DDS	0x40	/* RW, disable scrambling */

/* RSOP_SIS is reg 0x11 */
#define SUNI_RSOP_SIS_OOFV	0x01	/* R, out of frame */
#define SUNI_RSOP_SIS_LOFV	0x02	/* R, loss of frame */
#define SUNI_RSOP_SIS_LOSV	0x04	/* R, loss of signal */
#define SUNI_RSOP_SIS_OOFI	0x08	/* R, out of frame interrupt */
#define SUNI_RSOP_SIS_LOFI	0x10	/* R, loss of frame interrupt */
#define SUNI_RSOP_SIS_LOSI	0x20	/* R, loss of signal interrupt */
#define SUNI_RSOP_SIS_BIPEI	0x40	/* R, section BIP-8 interrupt */

/* TSOP_CTRL is reg 0x14 */
#define SUNI_TSOP_CTRL_LAIS	0x01	/* insert alarm indication signal */
#define SUNI_TSOP_CTRL_DS	0x40	/* disable scrambling */

/* TSOP_DIAG is reg 0x15 */
#define SUNI_TSOP_DIAG_DFP	0x01	/* insert single bit error cont. */
#define SUNI_TSOP_DIAG_DBIP8	0x02	/* insert section BIP err (cont) */
#define SUNI_TSOP_DIAG_DLOS	0x04	/* set line to zero (loss of signal) */

/* TLOP_DIAG is reg 0x21 */
#define SUNI_TLOP_DIAG_DBIP	0x01	/* insert line BIP err (continuously) */

/* SSTB_CTRL is reg 0x28 */
#define SUNI_SSTB_CTRL_LEN16	0x01	/* path trace message length bit */

/* RPOP_RC is reg 0x3D (PM5355) */
#define SUNI_RPOP_RC_ENSS	0x40	/* enable size bit */

/* TPOP_DIAG is reg 0x40 */
#define SUNI_TPOP_DIAG_PAIS	0x01	/* insert STS path alarm ind (cont) */
#define SUNI_TPOP_DIAG_DB3	0x02	/* insert path BIP err (continuously) */

/* TPOP_APM is reg 0x46 */
#define SUNI_TPOP_APM_APTR	0x03	/* RW, arbitrary pointer, upper 2
					   bits */
#define SUNI_TPOP_APM_APTR_SHIFT 0
#define SUNI_TPOP_APM_S		0x0c	/* RW, "unused" bits of payload
					   pointer */
#define SUNI_TPOP_APM_S_SHIFT	2
#define SUNI_TPOP_APM_NDF	0xf0	 /* RW, NDF bits */
#define SUNI_TPOP_APM_NDF_SHIFT	4

#define SUNI_TPOP_S_SONET	0	/* set S bits to 00 */
#define SUNI_TPOP_S_SDH		2	/* set S bits to 10 */

/* RACP_IES is reg 0x51 */
#define SUNI_RACP_IES_FOVRI	0x02	/* R, FIFO overrun */
#define SUNI_RACP_IES_UHCSI	0x04	/* R, uncorrectable HCS error */
#define SUNI_RACP_IES_CHCSI	0x08	/* R, correctable HCS error */
#define SUNI_RACP_IES_OOCDI	0x10	/* R, change of cell delineation
					   state */
#define SUNI_RACP_IES_FIFOE	0x20	/* RW, enable FIFO overrun interrupt */
#define SUNI_RACP_IES_HCSE	0x40	/* RW, enable HCS error interrupt */
#define SUNI_RACP_IES_OOCDE	0x80	/* RW, enable cell delineation state
					   change interrupt */

/* TACP_CS is reg 0x60 */
#define SUNI_TACP_CS_FIFORST	0x01	/* RW, reset transmit FIFO (sticky) */
#define SUNI_TACP_CS_DSCR	0x02	/* RW, disable payload scrambling */
#define SUNI_TACP_CS_HCAADD	0x04	/* RW, add coset polynomial to HCS */
#define SUNI_TACP_CS_DHCS	0x10	/* RW, insert HCS errors */
#define SUNI_TACP_CS_FOVRI	0x20	/* R, FIFO overrun */
#define SUNI_TACP_CS_TSOCI	0x40	/* R, TSOC input high */
#define SUNI_TACP_CS_FIFOE	0x80	/* RW, enable FIFO overrun interrupt */

/* TACP_IUCHP is reg 0x61 */
#define SUNI_TACP_IUCHP_CLP	0x01	/* RW, 8th bit of 4th octet of i/u
					   pattern */
#define SUNI_TACP_IUCHP_PTI	0x0e	/* RW, 5th-7th bits of 4th octet of i/u
					   pattern */
#define SUNI_TACP_IUCHP_PTI_SHIFT 1
#define SUNI_TACP_IUCHP_GFC	0xf0	/* RW, 1st-4th bits of 1st octet of i/u
					   pattern */
#define SUNI_TACP_IUCHP_GFC_SHIFT 4

/* SPTB_CTRL is reg 0x68 */
#define SUNI_SPTB_CTRL_LEN16	0x01	/* path trace message length */

/* MT is reg 0x80 */
#define SUNI_MT_HIZIO		0x01	/* RW, all but data bus & MP interface
					   tri-state */
#define SUNI_MT_HIZDATA		0x02	/* W, also tri-state data bus */
#define SUNI_MT_IOTST		0x04	/* RW, enable test mode */
#define SUNI_MT_DBCTRL		0x08	/* W, control data bus by CSB pin */
#define SUNI_MT_PMCTST		0x10	/* W, PMC test mode */
#define SUNI_MT_DS27_53		0x80	/* RW, select between 8- or 16- bit */


#define SUNI_IDLE_PATTERN       0x6a    /* idle pattern */


#ifdef __KERNEL__
struct suni_priv {
	struct k_sonet_stats sonet_stats;	/* link diagnostics */
	int loop_mode;				/* loopback mode */
	int type;				/* phy type */
	struct atm_dev *dev;			/* device back-pointer */
	struct suni_priv *next;			/* next SUNI */
};

int suni_init(struct atm_dev *dev);
#endif

#endif
Commit	Line	Data
b2441318	1	/* SPDX-License-Identifier: GPL-2.0 */
df3bc8bd CW	2	/*
	3	* drivers/atm/suni.h - S/UNI PHY driver
	4	*/
1da177e4 LT	5
1da177e4 LT	6	/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
1da177e4 LT	7
	8	#ifndef DRIVER_ATM_SUNI_H
	9	#define DRIVER_ATM_SUNI_H
	10
	11	#include <linux/atmdev.h>
	12	#include <linux/atmioc.h>
2be63b87	13	#include <linux/sonet.h>
1da177e4 LT	14
	15	/* SUNI registers */
	16
	17	#define SUNI_MRI 0x00 /* Master Reset and Identity / Load
	18	Meter */
	19	#define SUNI_MC 0x01 /* Master Configuration */
	20	#define SUNI_MIS 0x02 /* Master Interrupt Status */
	21	/* no 0x03 */
	22	#define SUNI_MCM 0x04 /* Master Clock Monitor */
	23	#define SUNI_MCT 0x05 /* Master Control */
	24	#define SUNI_CSCS 0x06 /* Clock Synthesis Control and Status */
	25	#define SUNI_CRCS 0x07 /* Clock Recovery Control and Status */
	26	/* 0x08-0x0F reserved */
	27	#define SUNI_RSOP_CIE 0x10 /* RSOP Control/Interrupt Enable */
	28	#define SUNI_RSOP_SIS 0x11 /* RSOP Status/Interrupt Status */
	29	#define SUNI_RSOP_SBL 0x12 /* RSOP Section BIP-8 LSB */
	30	#define SUNI_RSOP_SBM 0x13 /* RSOP Section BIP-8 MSB */
	31	#define SUNI_TSOP_CTRL 0x14 /* TSOP Control */
	32	#define SUNI_TSOP_DIAG 0x15 /* TSOP Diagnostic */
	33	/* 0x16-0x17 reserved */
	34	#define SUNI_RLOP_CS 0x18 /* RLOP Control/Status */
	35	#define SUNI_RLOP_IES 0x19 /* RLOP Interrupt Enable/Status */
	36	#define SUNI_RLOP_LBL 0x1A /* RLOP Line BIP-8/24 LSB */
	37	#define SUNI_RLOP_LB 0x1B /* RLOP Line BIP-8/24 */
	38	#define SUNI_RLOP_LBM 0x1C /* RLOP Line BIP-8/24 MSB */
	39	#define SUNI_RLOP_LFL 0x1D /* RLOP Line FEBE LSB */
	40	#define SUNI_RLOP_LF 0x1E /* RLOP Line FEBE */
	41	#define SUNI_RLOP_LFM 0x1F /* RLOP Line FEBE MSB */
	42	#define SUNI_TLOP_CTRL 0x20 /* TLOP Control */
	43	#define SUNI_TLOP_DIAG 0x21 /* TLOP Diagnostic */
df3bc8bd CW	44	/* 0x22-0x27 reserved */
df3bc8bd CW	45	#define SUNI_SSTB_CTRL 0x28
1da177e4 LT	46	#define SUNI_RPOP_SC 0x30 /* RPOP Status/Control */
	47	#define SUNI_RPOP_IS 0x31 /* RPOP Interrupt Status */
	48	/* 0x32 reserved */
	49	#define SUNI_RPOP_IE 0x33 /* RPOP Interrupt Enable */
	50	/* 0x34-0x36 reserved */
	51	#define SUNI_RPOP_PSL 0x37 /* RPOP Path Signal Label */
	52	#define SUNI_RPOP_PBL 0x38 /* RPOP Path BIP-8 LSB */
	53	#define SUNI_RPOP_PBM 0x39 /* RPOP Path BIP-8 MSB */
	54	#define SUNI_RPOP_PFL 0x3A /* RPOP Path FEBE LSB */
	55	#define SUNI_RPOP_PFM 0x3B /* RPOP Path FEBE MSB */
	56	/* 0x3C reserved */
	57	#define SUNI_RPOP_PBC 0x3D /* RPOP Path BIP-8 Configuration */
df3bc8bd	58	#define SUNI_RPOP_RC 0x3D /* RPOP Ring Control (PM5355) */
1da177e4 LT	59	/* 0x3E-0x3F reserved */
	60	#define SUNI_TPOP_CD 0x40 /* TPOP Control/Diagnostic */
	61	#define SUNI_TPOP_PC 0x41 /* TPOP Pointer Control */
	62	/* 0x42-0x44 reserved */
	63	#define SUNI_TPOP_APL 0x45 /* TPOP Arbitrary Pointer LSB */
	64	#define SUNI_TPOP_APM 0x46 /* TPOP Arbitrary Pointer MSB */
	65	/* 0x47 reserved */
	66	#define SUNI_TPOP_PSL 0x48 /* TPOP Path Signal Label */
	67	#define SUNI_TPOP_PS 0x49 /* TPOP Path Status */
	68	/* 0x4A-0x4F reserved */
	69	#define SUNI_RACP_CS 0x50 /* RACP Control/Status */
	70	#define SUNI_RACP_IES 0x51 /* RACP Interrupt Enable/Status */
	71	#define SUNI_RACP_MHP 0x52 /* RACP Match Header Pattern */
	72	#define SUNI_RACP_MHM 0x53 /* RACP Match Header Mask */
	73	#define SUNI_RACP_CHEC 0x54 /* RACP Correctable HCS Error Count */
	74	#define SUNI_RACP_UHEC 0x55 /* RACP Uncorrectable HCS Err Count */
	75	#define SUNI_RACP_RCCL 0x56 /* RACP Receive Cell Counter LSB */
	76	#define SUNI_RACP_RCC 0x57 /* RACP Receive Cell Counter */
	77	#define SUNI_RACP_RCCM 0x58 /* RACP Receive Cell Counter MSB */
	78	#define SUNI_RACP_CFG 0x59 /* RACP Configuration */
	79	/* 0x5A-0x5F reserved */
	80	#define SUNI_TACP_CS 0x60 /* TACP Control/Status */
	81	#define SUNI_TACP_IUCHP 0x61 /* TACP Idle/Unassigned Cell Hdr Pat */
	82	#define SUNI_TACP_IUCPOP 0x62 /* TACP Idle/Unassigned Cell Payload
	83	Octet Pattern */
	84	#define SUNI_TACP_FIFO 0x63 /* TACP FIFO Configuration */
	85	#define SUNI_TACP_TCCL 0x64 /* TACP Transmit Cell Counter LSB */
	86	#define SUNI_TACP_TCC 0x65 /* TACP Transmit Cell Counter */
	87	#define SUNI_TACP_TCCM 0x66 /* TACP Transmit Cell Counter MSB */
	88	#define SUNI_TACP_CFG 0x67 /* TACP Configuration */
df3bc8bd CW	89	#define SUNI_SPTB_CTRL 0x68 /* SPTB Control */
df3bc8bd CW	90	/* 0x69-0x7F reserved */
1da177e4 LT	91	#define SUNI_MT 0x80 /* Master Test */
	92	/* 0x81-0xFF reserved */
	93
	94	/* SUNI register values */
	95
	96
	97	/* MRI is reg 0 */
	98	#define SUNI_MRI_ID 0x0f /* R, SUNI revision number */
	99	#define SUNI_MRI_ID_SHIFT 0
	100	#define SUNI_MRI_TYPE 0x70 /* R, SUNI type (lite is 011) */
	101	#define SUNI_MRI_TYPE_SHIFT 4
df3bc8bd CW	102	#define SUNI_MRI_TYPE_PM5346 0x3 /* S/UNI 155 LITE */
	103	#define SUNI_MRI_TYPE_PM5347 0x4 /* S/UNI 155 PLUS */
	104	#define SUNI_MRI_TYPE_PM5350 0x7 /* S/UNI 155 ULTRA */
	105	#define SUNI_MRI_TYPE_PM5355 0x1 /* S/UNI 622 */
1da177e4 LT	106	#define SUNI_MRI_RESET 0x80 /* RW, reset & power down chip
	107	0: normal operation
	108	1: reset & low power */
df3bc8bd CW	109
	110	/* MCM is reg 0x4 */
	111	#define SUNI_MCM_LLE 0x20 /* line loopback (PM5355) */
	112	#define SUNI_MCM_DLE 0x10 /* diagnostic loopback (PM5355) */
	113
1da177e4 LT	114	/* MCT is reg 5 */
	115	#define SUNI_MCT_LOOPT 0x01 /* RW, timing source, 0: from
	116	TRCLK+/- */
	117	#define SUNI_MCT_DLE 0x02 /* RW, diagnostic loopback */
	118	#define SUNI_MCT_LLE 0x04 /* RW, line loopback */
	119	#define SUNI_MCT_FIXPTR 0x20 /* RW, disable transmit payload pointer
	120	adjustments
	121	0: payload ptr controlled by TPOP
	122	ptr control reg
	123	1: payload pointer fixed at 522 */
	124	#define SUNI_MCT_LCDV 0x40 /* R, loss of cell delineation */
	125	#define SUNI_MCT_LCDE 0x80 /* RW, loss of cell delineation
	126	interrupt (1: on) */
	127	/* RSOP_CIE is reg 0x10 */
	128	#define SUNI_RSOP_CIE_OOFE 0x01 /* RW, enable interrupt on frame alarm
	129	state change */
	130	#define SUNI_RSOP_CIE_LOFE 0x02 /* RW, enable interrupt on loss of
	131	frame state change */
	132	#define SUNI_RSOP_CIE_LOSE 0x04 /* RW, enable interrupt on loss of
	133	signal state change */
	134	#define SUNI_RSOP_CIE_BIPEE 0x08 /* RW, enable interrupt on section
	135	BIP-8 error (B1) */
	136	#define SUNI_RSOP_CIE_FOOF 0x20 /* W, force RSOP out of frame at next
	137	boundary */
	138	#define SUNI_RSOP_CIE_DDS 0x40 /* RW, disable scrambling */
	139
	140	/* RSOP_SIS is reg 0x11 */
	141	#define SUNI_RSOP_SIS_OOFV 0x01 /* R, out of frame */
	142	#define SUNI_RSOP_SIS_LOFV 0x02 /* R, loss of frame */
	143	#define SUNI_RSOP_SIS_LOSV 0x04 /* R, loss of signal */
	144	#define SUNI_RSOP_SIS_OOFI 0x08 /* R, out of frame interrupt */
	145	#define SUNI_RSOP_SIS_LOFI 0x10 /* R, loss of frame interrupt */
	146	#define SUNI_RSOP_SIS_LOSI 0x20 /* R, loss of signal interrupt */
	147	#define SUNI_RSOP_SIS_BIPEI 0x40 /* R, section BIP-8 interrupt */
	148
	149	/* TSOP_CTRL is reg 0x14 */
	150	#define SUNI_TSOP_CTRL_LAIS 0x01 /* insert alarm indication signal */
	151	#define SUNI_TSOP_CTRL_DS 0x40 /* disable scrambling */
	152
	153	/* TSOP_DIAG is reg 0x15 */
	154	#define SUNI_TSOP_DIAG_DFP 0x01 /* insert single bit error cont. */
	155	#define SUNI_TSOP_DIAG_DBIP8 0x02 /* insert section BIP err (cont) */
	156	#define SUNI_TSOP_DIAG_DLOS 0x04 /* set line to zero (loss of signal) */
	157
	158	/* TLOP_DIAG is reg 0x21 */
	159	#define SUNI_TLOP_DIAG_DBIP 0x01 /* insert line BIP err (continuously) */
	160
df3bc8bd CW	161	/* SSTB_CTRL is reg 0x28 */
	162	#define SUNI_SSTB_CTRL_LEN16 0x01 /* path trace message length bit */
	163
	164	/* RPOP_RC is reg 0x3D (PM5355) */
	165	#define SUNI_RPOP_RC_ENSS 0x40 /* enable size bit */
	166
1da177e4 LT	167	/* TPOP_DIAG is reg 0x40 */
	168	#define SUNI_TPOP_DIAG_PAIS 0x01 /* insert STS path alarm ind (cont) */
	169	#define SUNI_TPOP_DIAG_DB3 0x02 /* insert path BIP err (continuously) */
	170
	171	/* TPOP_APM is reg 0x46 */
	172	#define SUNI_TPOP_APM_APTR 0x03 /* RW, arbitrary pointer, upper 2
	173	bits */
	174	#define SUNI_TPOP_APM_APTR_SHIFT 0
	175	#define SUNI_TPOP_APM_S 0x0c /* RW, "unused" bits of payload
	176	pointer */
	177	#define SUNI_TPOP_APM_S_SHIFT 2
	178	#define SUNI_TPOP_APM_NDF 0xf0 /* RW, NDF bits */
	179	#define SUNI_TPOP_APM_NDF_SHIFT 4
	180
	181	#define SUNI_TPOP_S_SONET 0 /* set S bits to 00 */
	182	#define SUNI_TPOP_S_SDH 2 /* set S bits to 10 */
	183
	184	/* RACP_IES is reg 0x51 */
	185	#define SUNI_RACP_IES_FOVRI 0x02 /* R, FIFO overrun */
	186	#define SUNI_RACP_IES_UHCSI 0x04 /* R, uncorrectable HCS error */
	187	#define SUNI_RACP_IES_CHCSI 0x08 /* R, correctable HCS error */
	188	#define SUNI_RACP_IES_OOCDI 0x10 /* R, change of cell delineation
	189	state */
	190	#define SUNI_RACP_IES_FIFOE 0x20 /* RW, enable FIFO overrun interrupt */
	191	#define SUNI_RACP_IES_HCSE 0x40 /* RW, enable HCS error interrupt */
	192	#define SUNI_RACP_IES_OOCDE 0x80 /* RW, enable cell delineation state
	193	change interrupt */
	194
	195	/* TACP_CS is reg 0x60 */
	196	#define SUNI_TACP_CS_FIFORST 0x01 /* RW, reset transmit FIFO (sticky) */
	197	#define SUNI_TACP_CS_DSCR 0x02 /* RW, disable payload scrambling */
	198	#define SUNI_TACP_CS_HCAADD 0x04 /* RW, add coset polynomial to HCS */
	199	#define SUNI_TACP_CS_DHCS 0x10 /* RW, insert HCS errors */
	200	#define SUNI_TACP_CS_FOVRI 0x20 /* R, FIFO overrun */
	201	#define SUNI_TACP_CS_TSOCI 0x40 /* R, TSOC input high */
	202	#define SUNI_TACP_CS_FIFOE 0x80 /* RW, enable FIFO overrun interrupt */
	203
	204	/* TACP_IUCHP is reg 0x61 */
	205	#define SUNI_TACP_IUCHP_CLP 0x01 /* RW, 8th bit of 4th octet of i/u
	206	pattern */
	207	#define SUNI_TACP_IUCHP_PTI 0x0e /* RW, 5th-7th bits of 4th octet of i/u
	208	pattern */
	209	#define SUNI_TACP_IUCHP_PTI_SHIFT 1
	210	#define SUNI_TACP_IUCHP_GFC 0xf0 /* RW, 1st-4th bits of 1st octet of i/u
	211	pattern */
	212	#define SUNI_TACP_IUCHP_GFC_SHIFT 4
	213
df3bc8bd CW	214	/* SPTB_CTRL is reg 0x68 */
	215	#define SUNI_SPTB_CTRL_LEN16 0x01 /* path trace message length */
	216
1da177e4 LT	217	/* MT is reg 0x80 */
	218	#define SUNI_MT_HIZIO 0x01 /* RW, all but data bus & MP interface
	219	tri-state */
	220	#define SUNI_MT_HIZDATA 0x02 /* W, also tri-state data bus */
	221	#define SUNI_MT_IOTST 0x04 /* RW, enable test mode */
	222	#define SUNI_MT_DBCTRL 0x08 /* W, control data bus by CSB pin */
	223	#define SUNI_MT_PMCTST 0x10 /* W, PMC test mode */
	224	#define SUNI_MT_DS27_53 0x80 /* RW, select between 8- or 16- bit */
	225
	226
	227	#define SUNI_IDLE_PATTERN 0x6a /* idle pattern */
	228
	229
	230	#ifdef __KERNEL__
2be63b87 JBD	231	struct suni_priv {
	232	struct k_sonet_stats sonet_stats; /* link diagnostics */
	233	int loop_mode; /* loopback mode */
df3bc8bd	234	int type; /* phy type */
2be63b87 JBD	235	struct atm_dev dev; / device back-pointer */
	236	struct suni_priv next; / next SUNI */
	237	};
	238
1da177e4 LT	239	int suni_init(struct atm_dev *dev);
	240	#endif
	241
	242	#endif