[linux.git] / fs / ext3 / Kconfig

config EXT3_FS
	tristate "Ext3 journalling file system support"
	select JBD
	help
	  This is the journalling version of the Second extended file system
	  (often called ext3), the de facto standard Linux file system
	  (method to organize files on a storage device) for hard disks.

	  The journalling code included in this driver means you do not have
	  to run e2fsck (file system checker) on your file systems after a
	  crash.  The journal keeps track of any changes that were being made
	  at the time the system crashed, and can ensure that your file system
	  is consistent without the need for a lengthy check.

	  Other than adding the journal to the file system, the on-disk format
	  of ext3 is identical to ext2.  It is possible to freely switch
	  between using the ext3 driver and the ext2 driver, as long as the
	  file system has been cleanly unmounted, or e2fsck is run on the file
	  system.

	  To add a journal on an existing ext2 file system or change the
	  behavior of ext3 file systems, you can use the tune2fs utility ("man
	  tune2fs").  To modify attributes of files and directories on ext3
	  file systems, use chattr ("man chattr").  You need to be using
	  e2fsprogs version 1.20 or later in order to create ext3 journals
	  (available at <http://sourceforge.net/projects/e2fsprogs/>).

	  To compile this file system support as a module, choose M here: the
	  module will be called ext3.

config EXT3_DEFAULTS_TO_ORDERED
	bool "Default to 'data=ordered' in ext3"
	depends on EXT3_FS
	default y
	help
	  The journal mode options for ext3 have different tradeoffs
	  between when data is guaranteed to be on disk and
	  performance.	The use of "data=writeback" can cause
	  unwritten data to appear in files after an system crash or
	  power failure, which can be a security issue.	 However,
	  "data=ordered" mode can also result in major performance
	  problems, including seconds-long delays before an fsync()
	  call returns.	 For details, see:

	  http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs

	  If you have been historically happy with ext3's performance,
	  data=ordered mode will be a safe choice and you should
	  answer 'y' here.  If you understand the reliability and data
	  privacy issues of data=writeback and are willing to make
	  that trade off, answer 'n'.

config EXT3_FS_XATTR
	bool "Ext3 extended attributes"
	depends on EXT3_FS
	default y
	help
	  Extended attributes are name:value pairs associated with inodes by
	  the kernel or by users (see the attr(5) manual page, or visit
	  <http://acl.bestbits.at/> for details).

	  If unsure, say N.

	  You need this for POSIX ACL support on ext3.

config EXT3_FS_POSIX_ACL
	bool "Ext3 POSIX Access Control Lists"
	depends on EXT3_FS_XATTR
	select FS_POSIX_ACL
	help
	  Posix Access Control Lists (ACLs) support permissions for users and
	  groups beyond the owner/group/world scheme.

	  To learn more about Access Control Lists, visit the Posix ACLs for
	  Linux website <http://acl.bestbits.at/>.

	  If you don't know what Access Control Lists are, say N

config EXT3_FS_SECURITY
	bool "Ext3 Security Labels"
	depends on EXT3_FS_XATTR
	help
	  Security labels support alternative access control models
	  implemented by security modules like SELinux.  This option
	  enables an extended attribute handler for file security
	  labels in the ext3 filesystem.

	  If you are not using a security module that requires using
	  extended attributes for file security labels, say N.
Commit	Line	Data
6da0b38f AD	1	config EXT3_FS
	2	tristate "Ext3 journalling file system support"
	3	select JBD
	4	help
	5	This is the journalling version of the Second extended file system
	6	(often called ext3), the de facto standard Linux file system
	7	(method to organize files on a storage device) for hard disks.
	8
	9	The journalling code included in this driver means you do not have
	10	to run e2fsck (file system checker) on your file systems after a
	11	crash. The journal keeps track of any changes that were being made
	12	at the time the system crashed, and can ensure that your file system
	13	is consistent without the need for a lengthy check.
	14
	15	Other than adding the journal to the file system, the on-disk format
	16	of ext3 is identical to ext2. It is possible to freely switch
	17	between using the ext3 driver and the ext2 driver, as long as the
	18	file system has been cleanly unmounted, or e2fsck is run on the file
	19	system.
	20
	21	To add a journal on an existing ext2 file system or change the
	22	behavior of ext3 file systems, you can use the tune2fs utility ("man
	23	tune2fs"). To modify attributes of files and directories on ext3
	24	file systems, use chattr ("man chattr"). You need to be using
	25	e2fsprogs version 1.20 or later in order to create ext3 journals
	26	(available at <http://sourceforge.net/projects/e2fsprogs/>).
	27
	28	To compile this file system support as a module, choose M here: the
	29	module will be called ext3.
	30
bbae8bcc	31	config EXT3_DEFAULTS_TO_ORDERED
6d418076	32	bool "Default to 'data=ordered' in ext3"
bbae8bcc	33	depends on EXT3_FS
aa32a796	34	default y
bbae8bcc	35	help
6d418076 TT	36	The journal mode options for ext3 have different tradeoffs
	37	between when data is guaranteed to be on disk and
	38	performance. The use of "data=writeback" can cause
	39	unwritten data to appear in files after an system crash or
	40	power failure, which can be a security issue. However,
	41	"data=ordered" mode can also result in major performance
	42	problems, including seconds-long delays before an fsync()
	43	call returns. For details, see:
	44
	45	http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs
	46
	47	If you have been historically happy with ext3's performance,
	48	data=ordered mode will be a safe choice and you should
	49	answer 'y' here. If you understand the reliability and data
	50	privacy issues of data=writeback and are willing to make
	51	that trade off, answer 'n'.
bbae8bcc	52
6da0b38f AD	53	config EXT3_FS_XATTR
	54	bool "Ext3 extended attributes"
	55	depends on EXT3_FS
	56	default y
	57	help
	58	Extended attributes are name:value pairs associated with inodes by
	59	the kernel or by users (see the attr(5) manual page, or visit
	60	<http://acl.bestbits.at/> for details).
	61
	62	If unsure, say N.
	63
	64	You need this for POSIX ACL support on ext3.
	65
	66	config EXT3_FS_POSIX_ACL
	67	bool "Ext3 POSIX Access Control Lists"
	68	depends on EXT3_FS_XATTR
	69	select FS_POSIX_ACL
	70	help
	71	Posix Access Control Lists (ACLs) support permissions for users and
	72	groups beyond the owner/group/world scheme.
	73
	74	To learn more about Access Control Lists, visit the Posix ACLs for
	75	Linux website <http://acl.bestbits.at/>.
	76
	77	If you don't know what Access Control Lists are, say N
	78
	79	config EXT3_FS_SECURITY
	80	bool "Ext3 Security Labels"
	81	depends on EXT3_FS_XATTR
	82	help
	83	Security labels support alternative access control models
	84	implemented by security modules like SELinux. This option
	85	enables an extended attribute handler for file security
	86	labels in the ext3 filesystem.
	87
	88	If you are not using a security module that requires using
	89	extended attributes for file security labels, say N.