[linux.git] / drivers / ata / pata_pdc202xx_old.c

/*
 * pata_pdc202xx_old.c 	- Promise PDC202xx PATA for new ATA layer
 *			  (C) 2005 Red Hat Inc
 *			  Alan Cox <[email protected]>
 *			  (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz
 *
 * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
 *
 * First cut with LBA48/ATAPI
 *
 * TODO:
 *	Channel interlock/reset on both required ?
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>

#define DRV_NAME "pata_pdc202xx_old"
#define DRV_VERSION "0.4.3"

static int pdc2026x_cable_detect(struct ata_port *ap)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	u16 cis;

	pci_read_config_word(pdev, 0x50, &cis);
	if (cis & (1 << (10 + ap->port_no)))
		return ATA_CBL_PATA40;
	return ATA_CBL_PATA80;
}

static void pdc202xx_exec_command(struct ata_port *ap,
				  const struct ata_taskfile *tf)
{
	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);

	iowrite8(tf->command, ap->ioaddr.command_addr);
	ndelay(400);
}

static bool pdc202xx_irq_check(struct ata_port *ap)
{
	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
	unsigned long master	= pci_resource_start(pdev, 4);
	u8 sc1d			= inb(master + 0x1d);

	if (ap->port_no) {
		/*
		 * bit 7: error, bit 6: interrupting,
		 * bit 5: FIFO full, bit 4: FIFO empty
		 */
		return sc1d & 0x40;
	} else	{
		/*
		 * bit 3: error, bit 2: interrupting,
		 * bit 1: FIFO full, bit 0: FIFO empty
		 */
		return sc1d & 0x04;
	}
}

/**
 *	pdc202xx_configure_piomode	-	set chip PIO timing
 *	@ap: ATA interface
 *	@adev: ATA device
 *	@pio: PIO mode
 *
 *	Called to do the PIO mode setup. Our timing registers are shared
 *	so a configure_dmamode call will undo any work we do here and vice
 *	versa
 */

static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
	static u16 pio_timing[5] = {
		0x0913, 0x050C , 0x0308, 0x0206, 0x0104
	};
	u8 r_ap, r_bp;

	pci_read_config_byte(pdev, port, &r_ap);
	pci_read_config_byte(pdev, port + 1, &r_bp);
	r_ap &= ~0x3F;	/* Preserve ERRDY_EN, SYNC_IN */
	r_bp &= ~0x1F;
	r_ap |= (pio_timing[pio] >> 8);
	r_bp |= (pio_timing[pio] & 0xFF);

	if (ata_pio_need_iordy(adev))
		r_ap |= 0x20;	/* IORDY enable */
	if (adev->class == ATA_DEV_ATA)
		r_ap |= 0x10;	/* FIFO enable */
	pci_write_config_byte(pdev, port, r_ap);
	pci_write_config_byte(pdev, port + 1, r_bp);
}

/**
 *	pdc202xx_set_piomode	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the PIO mode setup. Our timing registers are shared
 *	but we want to set the PIO timing by default.
 */

static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	pdc202xx_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
}

/**
 *	pdc202xx_configure_dmamode	-	set DMA mode in chip
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Load DMA cycle times into the chip ready for a DMA transfer
 *	to occur.
 */

static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
	static u8 udma_timing[6][2] = {
		{ 0x60, 0x03 },	/* 33 Mhz Clock */
		{ 0x40, 0x02 },
		{ 0x20, 0x01 },
		{ 0x40, 0x02 },	/* 66 Mhz Clock */
		{ 0x20, 0x01 },
		{ 0x20, 0x01 }
	};
	static u8 mdma_timing[3][2] = {
		{ 0xe0, 0x0f },
		{ 0x60, 0x04 },
		{ 0x60, 0x03 },
	};
	u8 r_bp, r_cp;

	pci_read_config_byte(pdev, port + 1, &r_bp);
	pci_read_config_byte(pdev, port + 2, &r_cp);

	r_bp &= ~0xE0;
	r_cp &= ~0x0F;

	if (adev->dma_mode >= XFER_UDMA_0) {
		int speed = adev->dma_mode - XFER_UDMA_0;
		r_bp |= udma_timing[speed][0];
		r_cp |= udma_timing[speed][1];

	} else {
		int speed = adev->dma_mode - XFER_MW_DMA_0;
		r_bp |= mdma_timing[speed][0];
		r_cp |= mdma_timing[speed][1];
	}
	pci_write_config_byte(pdev, port + 1, r_bp);
	pci_write_config_byte(pdev, port + 2, r_cp);

}

/**
 *	pdc2026x_bmdma_start		-	DMA engine begin
 *	@qc: ATA command
 *
 *	In UDMA3 or higher we have to clock switch for the duration of the
 *	DMA transfer sequence.
 *
 *	Note: The host lock held by the libata layer protects
 *	us from two channels both trying to set DMA bits at once
 */

static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;
	struct ata_taskfile *tf = &qc->tf;
	int sel66 = ap->port_no ? 0x08: 0x02;

	void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
	void __iomem *clock = master + 0x11;
	void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);

	u32 len;

	/* Check we keep host level locking here */
	if (adev->dma_mode > XFER_UDMA_2)
		iowrite8(ioread8(clock) | sel66, clock);
	else
		iowrite8(ioread8(clock) & ~sel66, clock);

	/* The DMA clocks may have been trashed by a reset. FIXME: make conditional
	   and move to qc_issue ? */
	pdc202xx_set_dmamode(ap, qc->dev);

	/* Cases the state machine will not complete correctly without help */
	if ((tf->flags & ATA_TFLAG_LBA48) ||  tf->protocol == ATAPI_PROT_DMA) {
		len = qc->nbytes / 2;

		if (tf->flags & ATA_TFLAG_WRITE)
			len |= 0x06000000;
		else
			len |= 0x05000000;

		iowrite32(len, atapi_reg);
	}

	/* Activate DMA */
	ata_bmdma_start(qc);
}

/**
 *	pdc2026x_bmdma_end		-	DMA engine stop
 *	@qc: ATA command
 *
 *	After a DMA completes we need to put the clock back to 33MHz for
 *	PIO timings.
 *
 *	Note: The host lock held by the libata layer protects
 *	us from two channels both trying to set DMA bits at once
 */

static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
{
	struct ata_port *ap = qc->ap;
	struct ata_device *adev = qc->dev;
	struct ata_taskfile *tf = &qc->tf;

	int sel66 = ap->port_no ? 0x08: 0x02;
	/* The clock bits are in the same register for both channels */
	void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
	void __iomem *clock = master + 0x11;
	void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);

	/* Cases the state machine will not complete correctly */
	if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) {
		iowrite32(0, atapi_reg);
		iowrite8(ioread8(clock) & ~sel66, clock);
	}
	/* Flip back to 33Mhz for PIO */
	if (adev->dma_mode > XFER_UDMA_2)
		iowrite8(ioread8(clock) & ~sel66, clock);
	ata_bmdma_stop(qc);
	pdc202xx_set_piomode(ap, adev);
}

/**
 *	pdc2026x_dev_config	-	device setup hook
 *	@adev: newly found device
 *
 *	Perform chip specific early setup. We need to lock the transfer
 *	sizes to 8bit to avoid making the state engine on the 2026x cards
 *	barf.
 */

static void pdc2026x_dev_config(struct ata_device *adev)
{
	adev->max_sectors = 256;
}

static int pdc2026x_port_start(struct ata_port *ap)
{
	void __iomem *bmdma = ap->ioaddr.bmdma_addr;
	if (bmdma) {
		/* Enable burst mode */
		u8 burst = ioread8(bmdma + 0x1f);
		iowrite8(burst | 0x01, bmdma + 0x1f);
	}
	return ata_bmdma_port_start(ap);
}

/**
 *	pdc2026x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
 *	@qc: Metadata associated with taskfile to check
 *
 *	Just say no - not supported on older Promise.
 *
 *	LOCKING:
 *	None (inherited from caller).
 *
 *	RETURNS: 0 when ATAPI DMA can be used
 *		 1 otherwise
 */

static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc)
{
	return 1;
}

static struct scsi_host_template pdc202xx_sht = {
	ATA_BMDMA_SHT(DRV_NAME),
};

static struct ata_port_operations pdc2024x_port_ops = {
	.inherits		= &ata_bmdma_port_ops,

	.cable_detect		= ata_cable_40wire,
	.set_piomode		= pdc202xx_set_piomode,
	.set_dmamode		= pdc202xx_set_dmamode,

	.sff_exec_command	= pdc202xx_exec_command,
	.sff_irq_check		= pdc202xx_irq_check,
};

static struct ata_port_operations pdc2026x_port_ops = {
	.inherits		= &pdc2024x_port_ops,

	.check_atapi_dma	= pdc2026x_check_atapi_dma,
	.bmdma_start		= pdc2026x_bmdma_start,
	.bmdma_stop		= pdc2026x_bmdma_stop,

	.cable_detect		= pdc2026x_cable_detect,
	.dev_config		= pdc2026x_dev_config,

	.port_start		= pdc2026x_port_start,

	.sff_exec_command	= pdc202xx_exec_command,
	.sff_irq_check		= pdc202xx_irq_check,
};

static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	static const struct ata_port_info info[3] = {
		{
			.flags = ATA_FLAG_SLAVE_POSS,
			.pio_mask = ATA_PIO4,
			.mwdma_mask = ATA_MWDMA2,
			.udma_mask = ATA_UDMA2,
			.port_ops = &pdc2024x_port_ops
		},
		{
			.flags = ATA_FLAG_SLAVE_POSS,
			.pio_mask = ATA_PIO4,
			.mwdma_mask = ATA_MWDMA2,
			.udma_mask = ATA_UDMA4,
			.port_ops = &pdc2026x_port_ops
		},
		{
			.flags = ATA_FLAG_SLAVE_POSS,
			.pio_mask = ATA_PIO4,
			.mwdma_mask = ATA_MWDMA2,
			.udma_mask = ATA_UDMA5,
			.port_ops = &pdc2026x_port_ops
		}

	};
	const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };

	if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
		struct pci_dev *bridge = dev->bus->self;
		/* Don't grab anything behind a Promise I2O RAID */
		if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
			if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
				return -ENODEV;
			if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
				return -ENODEV;
		}
	}
	return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
}

static const struct pci_device_id pdc202xx[] = {
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },

	{ },
};

static struct pci_driver pdc202xx_pci_driver = {
	.name 		= DRV_NAME,
	.id_table	= pdc202xx,
	.probe 		= pdc202xx_init_one,
	.remove		= ata_pci_remove_one,
#ifdef CONFIG_PM_SLEEP
	.suspend	= ata_pci_device_suspend,
	.resume		= ata_pci_device_resume,
#endif
};

module_pci_driver(pdc202xx_pci_driver);

MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pdc202xx);
MODULE_VERSION(DRV_VERSION);
Commit	Line	Data
669a5db4 JG	1	/*
	2	* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
	3	* (C) 2005 Red Hat Inc
ab771630	4	* Alan Cox <[email protected]>
a75032e8	5	* (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz
669a5db4 JG	6	*
	7	* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
	8	*
	9	* First cut with LBA48/ATAPI
	10	*
	11	* TODO:
06b74dd2	12	* Channel interlock/reset on both required ?
669a5db4	13	*/
85cd7251	14
669a5db4 JG	15	#include <linux/kernel.h>
	16	#include <linux/module.h>
	17	#include <linux/pci.h>
669a5db4 JG	18	#include <linux/blkdev.h>
	19	#include <linux/delay.h>
	20	#include <scsi/scsi_host.h>
	21	#include <linux/libata.h>
	22
	23	#define DRV_NAME "pata_pdc202xx_old"
06b74dd2	24	#define DRV_VERSION "0.4.3"
669a5db4	25
a0fcdc02	26	static int pdc2026x_cable_detect(struct ata_port *ap)
669a5db4 JG	27	{
	28	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	29	u16 cis;
85cd7251	30
669a5db4 JG	31	pci_read_config_word(pdev, 0x50, &cis);
669a5db4 JG	32	if (cis & (1 << (10 + ap->port_no)))
a0ac38f1 AC	33	return ATA_CBL_PATA40;
a0ac38f1 AC	34	return ATA_CBL_PATA80;
669a5db4 JG	35	}
669a5db4 JG	36
750e519d	37	static void pdc202xx_exec_command(struct ata_port *ap,
a75032e8 BZ	38	const struct ata_taskfile *tf)
	39	{
	40	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
	41
	42	iowrite8(tf->command, ap->ioaddr.command_addr);
	43	ndelay(400);
	44	}
	45
606254e3 SS	46	static bool pdc202xx_irq_check(struct ata_port *ap)
	47	{
	48	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	49	unsigned long master = pci_resource_start(pdev, 4);
	50	u8 sc1d = inb(master + 0x1d);
	51
	52	if (ap->port_no) {
	53	/*
	54	* bit 7: error, bit 6: interrupting,
	55	* bit 5: FIFO full, bit 4: FIFO empty
	56	*/
	57	return sc1d & 0x40;
	58	} else {
	59	/*
	60	* bit 3: error, bit 2: interrupting,
	61	* bit 1: FIFO full, bit 0: FIFO empty
	62	*/
	63	return sc1d & 0x04;
	64	}
	65	}
	66
669a5db4	67	/**
ada406c8	68	* pdc202xx_configure_piomode - set chip PIO timing
669a5db4 JG	69	* @ap: ATA interface
	70	* @adev: ATA device
	71	* @pio: PIO mode
	72	*
	73	* Called to do the PIO mode setup. Our timing registers are shared
	74	* so a configure_dmamode call will undo any work we do here and vice
	75	* versa
	76	*/
85cd7251	77
ada406c8	78	static void pdc202xx_configure_piomode(struct ata_port ap, struct ata_device adev, int pio)
669a5db4 JG	79	{
669a5db4 JG	80	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
63ed7101	81	int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
669a5db4 JG	82	static u16 pio_timing[5] = {
	83	0x0913, 0x050C , 0x0308, 0x0206, 0x0104
	84	};
	85	u8 r_ap, r_bp;
	86
	87	pci_read_config_byte(pdev, port, &r_ap);
	88	pci_read_config_byte(pdev, port + 1, &r_bp);
	89	r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */
63ed7101	90	r_bp &= ~0x1F;
669a5db4 JG	91	r_ap \|= (pio_timing[pio] >> 8);
669a5db4 JG	92	r_bp \|= (pio_timing[pio] & 0xFF);
85cd7251	93
669a5db4 JG	94	if (ata_pio_need_iordy(adev))
	95	r_ap \|= 0x20; /* IORDY enable */
	96	if (adev->class == ATA_DEV_ATA)
	97	r_ap \|= 0x10; /* FIFO enable */
	98	pci_write_config_byte(pdev, port, r_ap);
	99	pci_write_config_byte(pdev, port + 1, r_bp);
	100	}
	101
	102	/**
ada406c8	103	* pdc202xx_set_piomode - set initial PIO mode data
669a5db4 JG	104	* @ap: ATA interface
	105	* @adev: ATA device
	106	*
	107	* Called to do the PIO mode setup. Our timing registers are shared
	108	* but we want to set the PIO timing by default.
	109	*/
85cd7251	110
ada406c8	111	static void pdc202xx_set_piomode(struct ata_port ap, struct ata_device adev)
669a5db4	112	{
ada406c8	113	pdc202xx_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0);
669a5db4 JG	114	}
	115
	116	/**
ada406c8	117	* pdc202xx_configure_dmamode - set DMA mode in chip
669a5db4 JG	118	* @ap: ATA interface
	119	* @adev: ATA device
	120	*
	121	* Load DMA cycle times into the chip ready for a DMA transfer
	122	* to occur.
	123	*/
85cd7251	124
ada406c8	125	static void pdc202xx_set_dmamode(struct ata_port ap, struct ata_device adev)
669a5db4 JG	126	{
669a5db4 JG	127	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
63ed7101	128	int port = 0x60 + 8 * ap->port_no + 4 * adev->devno;
669a5db4 JG	129	static u8 udma_timing[6][2] = {
	130	{ 0x60, 0x03 }, /* 33 Mhz Clock */
	131	{ 0x40, 0x02 },
	132	{ 0x20, 0x01 },
	133	{ 0x40, 0x02 }, /* 66 Mhz Clock */
	134	{ 0x20, 0x01 },
85cd7251	135	{ 0x20, 0x01 }
669a5db4	136	};
63ed7101	137	static u8 mdma_timing[3][2] = {
63ed7101	138	{ 0xe0, 0x0f },
06b74dd2 AC	139	{ 0x60, 0x04 },
06b74dd2 AC	140	{ 0x60, 0x03 },
63ed7101	141	};
669a5db4	142	u8 r_bp, r_cp;
85cd7251	143
669a5db4 JG	144	pci_read_config_byte(pdev, port + 1, &r_bp);
669a5db4 JG	145	pci_read_config_byte(pdev, port + 2, &r_cp);
85cd7251	146
63ed7101	147	r_bp &= ~0xE0;
669a5db4	148	r_cp &= ~0x0F;
85cd7251	149
669a5db4 JG	150	if (adev->dma_mode >= XFER_UDMA_0) {
	151	int speed = adev->dma_mode - XFER_UDMA_0;
	152	r_bp \|= udma_timing[speed][0];
	153	r_cp \|= udma_timing[speed][1];
85cd7251	154
669a5db4 JG	155	} else {
669a5db4 JG	156	int speed = adev->dma_mode - XFER_MW_DMA_0;
63ed7101 BZ	157	r_bp \|= mdma_timing[speed][0];
63ed7101 BZ	158	r_cp \|= mdma_timing[speed][1];
669a5db4 JG	159	}
	160	pci_write_config_byte(pdev, port + 1, r_bp);
	161	pci_write_config_byte(pdev, port + 2, r_cp);
85cd7251	162
669a5db4 JG	163	}
	164
	165	/**
	166	* pdc2026x_bmdma_start - DMA engine begin
	167	* @qc: ATA command
	168	*
	169	* In UDMA3 or higher we have to clock switch for the duration of the
	170	* DMA transfer sequence.
06b74dd2 AC	171	*
	172	* Note: The host lock held by the libata layer protects
	173	* us from two channels both trying to set DMA bits at once
669a5db4	174	*/
85cd7251	175
669a5db4 JG	176	static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
	177	{
	178	struct ata_port *ap = qc->ap;
	179	struct ata_device *adev = qc->dev;
	180	struct ata_taskfile *tf = &qc->tf;
	181	int sel66 = ap->port_no ? 0x08: 0x02;
	182
0d5ff566 TH	183	void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
	184	void __iomem *clock = master + 0x11;
	185	void __iomem atapi_reg = master + 0x20 + (4 ap->port_no);
85cd7251	186
669a5db4	187	u32 len;
85cd7251	188
669a5db4	189	/* Check we keep host level locking here */
6ad58b24	190	if (adev->dma_mode > XFER_UDMA_2)
0d5ff566	191	iowrite8(ioread8(clock) \| sel66, clock);
669a5db4	192	else
0d5ff566	193	iowrite8(ioread8(clock) & ~sel66, clock);
669a5db4	194
85cd7251	195	/* The DMA clocks may have been trashed by a reset. FIXME: make conditional
669a5db4	196	and move to qc_issue ? */
ada406c8	197	pdc202xx_set_dmamode(ap, qc->dev);
669a5db4 JG	198
669a5db4 JG	199	/* Cases the state machine will not complete correctly without help */
0dc36888	200	if ((tf->flags & ATA_TFLAG_LBA48) \|\| tf->protocol == ATAPI_PROT_DMA) {
5e518810	201	len = qc->nbytes / 2;
85cd7251	202
669a5db4 JG	203	if (tf->flags & ATA_TFLAG_WRITE)
	204	len \|= 0x06000000;
	205	else
	206	len \|= 0x05000000;
85cd7251	207
0d5ff566	208	iowrite32(len, atapi_reg);
669a5db4	209	}
85cd7251 JG	210
85cd7251 JG	211	/* Activate DMA */
669a5db4 JG	212	ata_bmdma_start(qc);
	213	}
	214
	215	/**
	216	* pdc2026x_bmdma_end - DMA engine stop
	217	* @qc: ATA command
	218	*
	219	* After a DMA completes we need to put the clock back to 33MHz for
	220	* PIO timings.
06b74dd2 AC	221	*
	222	* Note: The host lock held by the libata layer protects
	223	* us from two channels both trying to set DMA bits at once
669a5db4	224	*/
85cd7251	225
669a5db4 JG	226	static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
	227	{
	228	struct ata_port *ap = qc->ap;
	229	struct ata_device *adev = qc->dev;
	230	struct ata_taskfile *tf = &qc->tf;
85cd7251	231
669a5db4 JG	232	int sel66 = ap->port_no ? 0x08: 0x02;
669a5db4 JG	233	/* The clock bits are in the same register for both channels */
0d5ff566 TH	234	void __iomem *master = ap->host->ports[0]->ioaddr.bmdma_addr;
	235	void __iomem *clock = master + 0x11;
	236	void __iomem atapi_reg = master + 0x20 + (4 ap->port_no);
85cd7251	237
669a5db4	238	/* Cases the state machine will not complete correctly */
0dc36888	239	if (tf->protocol == ATAPI_PROT_DMA \|\| (tf->flags & ATA_TFLAG_LBA48)) {
0d5ff566 TH	240	iowrite32(0, atapi_reg);
0d5ff566 TH	241	iowrite8(ioread8(clock) & ~sel66, clock);
669a5db4	242	}
669a5db4	243	/* Flip back to 33Mhz for PIO */
6ad58b24	244	if (adev->dma_mode > XFER_UDMA_2)
0d5ff566	245	iowrite8(ioread8(clock) & ~sel66, clock);
669a5db4	246	ata_bmdma_stop(qc);
36906d9b	247	pdc202xx_set_piomode(ap, adev);
669a5db4 JG	248	}
	249
	250	/**
	251	* pdc2026x_dev_config - device setup hook
669a5db4 JG	252	* @adev: newly found device
	253	*
	254	* Perform chip specific early setup. We need to lock the transfer
	255	* sizes to 8bit to avoid making the state engine on the 2026x cards
	256	* barf.
	257	*/
85cd7251	258
cd0d3bbc	259	static void pdc2026x_dev_config(struct ata_device *adev)
669a5db4 JG	260	{
	261	adev->max_sectors = 256;
	262	}
	263
36906d9b AC	264	static int pdc2026x_port_start(struct ata_port *ap)
	265	{
	266	void __iomem *bmdma = ap->ioaddr.bmdma_addr;
	267	if (bmdma) {
	268	/* Enable burst mode */
	269	u8 burst = ioread8(bmdma + 0x1f);
	270	iowrite8(burst \| 0x01, bmdma + 0x1f);
	271	}
c7087652	272	return ata_bmdma_port_start(ap);
36906d9b AC	273	}
36906d9b AC	274
aa8f2371 AC	275	/**
	276	* pdc2026x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
	277	* @qc: Metadata associated with taskfile to check
	278	*
	279	* Just say no - not supported on older Promise.
	280	*
	281	* LOCKING:
	282	* None (inherited from caller).
	283	*
	284	* RETURNS: 0 when ATAPI DMA can be used
	285	* 1 otherwise
	286	*/
	287
	288	static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc)
	289	{
	290	return 1;
	291	}
	292
ada406c8	293	static struct scsi_host_template pdc202xx_sht = {
68d1d07b	294	ATA_BMDMA_SHT(DRV_NAME),
669a5db4 JG	295	};
	296
	297	static struct ata_port_operations pdc2024x_port_ops = {
029cfd6b TH	298	.inherits = &ata_bmdma_port_ops,
	299
	300	.cable_detect = ata_cable_40wire,
	301	.set_piomode = pdc202xx_set_piomode,
	302	.set_dmamode = pdc202xx_set_dmamode,
a75032e8	303
750e519d	304	.sff_exec_command = pdc202xx_exec_command,
606254e3	305	.sff_irq_check = pdc202xx_irq_check,
85cd7251	306	};
669a5db4 JG	307
669a5db4 JG	308	static struct ata_port_operations pdc2026x_port_ops = {
029cfd6b TH	309	.inherits = &pdc2024x_port_ops,
	310
	311	.check_atapi_dma = pdc2026x_check_atapi_dma,
	312	.bmdma_start = pdc2026x_bmdma_start,
	313	.bmdma_stop = pdc2026x_bmdma_stop,
	314
	315	.cable_detect = pdc2026x_cable_detect,
	316	.dev_config = pdc2026x_dev_config,
	317
	318	.port_start = pdc2026x_port_start,
750e519d BZ	319
750e519d BZ	320	.sff_exec_command = pdc202xx_exec_command,
606254e3	321	.sff_irq_check = pdc202xx_irq_check,
85cd7251	322	};
669a5db4	323
ada406c8	324	static int pdc202xx_init_one(struct pci_dev dev, const struct pci_device_id id)
669a5db4	325	{
1626aeb8	326	static const struct ata_port_info info[3] = {
669a5db4	327	{
1d2808fd	328	.flags = ATA_FLAG_SLAVE_POSS,
14bdef98 EIB	329	.pio_mask = ATA_PIO4,
14bdef98 EIB	330	.mwdma_mask = ATA_MWDMA2,
669a5db4 JG	331	.udma_mask = ATA_UDMA2,
669a5db4 JG	332	.port_ops = &pdc2024x_port_ops
85cd7251	333	},
669a5db4	334	{
1d2808fd	335	.flags = ATA_FLAG_SLAVE_POSS,
14bdef98 EIB	336	.pio_mask = ATA_PIO4,
14bdef98 EIB	337	.mwdma_mask = ATA_MWDMA2,
669a5db4 JG	338	.udma_mask = ATA_UDMA4,
	339	.port_ops = &pdc2026x_port_ops
	340	},
	341	{
1d2808fd	342	.flags = ATA_FLAG_SLAVE_POSS,
14bdef98 EIB	343	.pio_mask = ATA_PIO4,
14bdef98 EIB	344	.mwdma_mask = ATA_MWDMA2,
669a5db4 JG	345	.udma_mask = ATA_UDMA5,
	346	.port_ops = &pdc2026x_port_ops
	347	}
85cd7251	348
669a5db4	349	};
1626aeb8	350	const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
85cd7251	351
669a5db4 JG	352	if (dev->device == PCI_DEVICE_ID_PROMISE_20265) {
	353	struct pci_dev *bridge = dev->bus->self;
	354	/* Don't grab anything behind a Promise I2O RAID */
	355	if (bridge && bridge->vendor == PCI_VENDOR_ID_INTEL) {
b447916e	356	if (bridge->device == PCI_DEVICE_ID_INTEL_I960)
669a5db4	357	return -ENODEV;
b447916e	358	if (bridge->device == PCI_DEVICE_ID_INTEL_I960RM)
669a5db4 JG	359	return -ENODEV;
	360	}
	361	}
1c5afdf7	362	return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
669a5db4 JG	363	}
669a5db4 JG	364
ada406c8	365	static const struct pci_device_id pdc202xx[] = {
2d2744fc JG	366	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
	367	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
	368	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
	369	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
	370	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
	371
	372	{ },
669a5db4 JG	373	};
669a5db4 JG	374
ada406c8	375	static struct pci_driver pdc202xx_pci_driver = {
2d2744fc	376	.name = DRV_NAME,
ada406c8 AC	377	.id_table = pdc202xx,
ada406c8 AC	378	.probe = pdc202xx_init_one,
62d64ae0	379	.remove = ata_pci_remove_one,
58eb8cd5	380	#ifdef CONFIG_PM_SLEEP
62d64ae0 AC	381	.suspend = ata_pci_device_suspend,
62d64ae0 AC	382	.resume = ata_pci_device_resume,
438ac6d5	383	#endif
669a5db4 JG	384	};
669a5db4 JG	385
2fc75da0	386	module_pci_driver(pdc202xx_pci_driver);
669a5db4	387
669a5db4 JG	388	MODULE_AUTHOR("Alan Cox");
	389	MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
	390	MODULE_LICENSE("GPL");
ada406c8	391	MODULE_DEVICE_TABLE(pci, pdc202xx);
669a5db4	392	MODULE_VERSION(DRV_VERSION);