]>
Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* This version ported to the Linux-MTD system by [email protected] |
2b9175c1 | 2 | * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $ |
1da177e4 LT |
3 | * |
4 | * Fixes: Arnaldo Carvalho de Melo <[email protected]> | |
5 | * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups | |
6 | * | |
7 | * Based on: | |
8 | */ | |
9 | /*====================================================================== | |
10 | ||
11 | A Flash Translation Layer memory card driver | |
12 | ||
13 | This driver implements a disk-like block device driver with an | |
14 | apparent block size of 512 bytes for flash memory cards. | |
15 | ||
16 | ftl_cs.c 1.62 2000/02/01 00:59:04 | |
17 | ||
18 | The contents of this file are subject to the Mozilla Public | |
19 | License Version 1.1 (the "License"); you may not use this file | |
20 | except in compliance with the License. You may obtain a copy of | |
21 | the License at http://www.mozilla.org/MPL/ | |
22 | ||
23 | Software distributed under the License is distributed on an "AS | |
24 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
25 | implied. See the License for the specific language governing | |
26 | rights and limitations under the License. | |
27 | ||
28 | The initial developer of the original code is David A. Hinds | |
29 | <[email protected]>. Portions created by David A. Hinds | |
30 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
31 | ||
32 | Alternatively, the contents of this file may be used under the | |
33 | terms of the GNU General Public License version 2 (the "GPL"), in | |
34 | which case the provisions of the GPL are applicable instead of the | |
35 | above. If you wish to allow the use of your version of this file | |
36 | only under the terms of the GPL and not to allow others to use | |
37 | your version of this file under the MPL, indicate your decision | |
38 | by deleting the provisions above and replace them with the notice | |
39 | and other provisions required by the GPL. If you do not delete | |
40 | the provisions above, a recipient may use your version of this | |
41 | file under either the MPL or the GPL. | |
42 | ||
43 | LEGAL NOTE: The FTL format is patented by M-Systems. They have | |
44 | granted a license for its use with PCMCIA devices: | |
45 | ||
46 | "M-Systems grants a royalty-free, non-exclusive license under | |
47 | any presently existing M-Systems intellectual property rights | |
48 | necessary for the design and development of FTL-compatible | |
49 | drivers, file systems and utilities using the data formats with | |
50 | PCMCIA PC Cards as described in the PCMCIA Flash Translation | |
51 | Layer (FTL) Specification." | |
52 | ||
53 | Use of the FTL format for non-PCMCIA applications may be an | |
54 | infringement of these patents. For additional information, | |
55 | contact M-Systems (http://www.m-sys.com) directly. | |
97894cda | 56 | |
1da177e4 LT |
57 | ======================================================================*/ |
58 | #include <linux/mtd/blktrans.h> | |
59 | #include <linux/module.h> | |
60 | #include <linux/mtd/mtd.h> | |
61 | /*#define PSYCHO_DEBUG */ | |
62 | ||
63 | #include <linux/kernel.h> | |
64 | #include <linux/sched.h> | |
65 | #include <linux/ptrace.h> | |
66 | #include <linux/slab.h> | |
67 | #include <linux/string.h> | |
68 | #include <linux/timer.h> | |
69 | #include <linux/major.h> | |
70 | #include <linux/fs.h> | |
71 | #include <linux/init.h> | |
72 | #include <linux/hdreg.h> | |
73 | #include <linux/vmalloc.h> | |
74 | #include <linux/blkpg.h> | |
75 | #include <asm/uaccess.h> | |
76 | ||
77 | #include <linux/mtd/ftl.h> | |
78 | ||
79 | /*====================================================================*/ | |
80 | ||
81 | /* Parameters that can be set with 'insmod' */ | |
82 | static int shuffle_freq = 50; | |
83 | module_param(shuffle_freq, int, 0); | |
84 | ||
85 | /*====================================================================*/ | |
86 | ||
87 | /* Major device # for FTL device */ | |
88 | #ifndef FTL_MAJOR | |
89 | #define FTL_MAJOR 44 | |
90 | #endif | |
91 | ||
92 | ||
93 | /*====================================================================*/ | |
94 | ||
95 | /* Maximum number of separate memory devices we'll allow */ | |
96 | #define MAX_DEV 4 | |
97 | ||
98 | /* Maximum number of regions per device */ | |
99 | #define MAX_REGION 4 | |
100 | ||
101 | /* Maximum number of partitions in an FTL region */ | |
102 | #define PART_BITS 4 | |
103 | ||
104 | /* Maximum number of outstanding erase requests per socket */ | |
105 | #define MAX_ERASE 8 | |
106 | ||
107 | /* Sector size -- shouldn't need to change */ | |
108 | #define SECTOR_SIZE 512 | |
109 | ||
110 | ||
111 | /* Each memory region corresponds to a minor device */ | |
112 | typedef struct partition_t { | |
113 | struct mtd_blktrans_dev mbd; | |
114 | u_int32_t state; | |
115 | u_int32_t *VirtualBlockMap; | |
116 | u_int32_t *VirtualPageMap; | |
117 | u_int32_t FreeTotal; | |
118 | struct eun_info_t { | |
119 | u_int32_t Offset; | |
120 | u_int32_t EraseCount; | |
121 | u_int32_t Free; | |
122 | u_int32_t Deleted; | |
123 | } *EUNInfo; | |
124 | struct xfer_info_t { | |
125 | u_int32_t Offset; | |
126 | u_int32_t EraseCount; | |
127 | u_int16_t state; | |
128 | } *XferInfo; | |
129 | u_int16_t bam_index; | |
130 | u_int32_t *bam_cache; | |
131 | u_int16_t DataUnits; | |
132 | u_int32_t BlocksPerUnit; | |
133 | erase_unit_header_t header; | |
134 | #if 0 | |
135 | region_info_t region; | |
136 | memory_handle_t handle; | |
137 | #endif | |
138 | } partition_t; | |
139 | ||
140 | void ftl_freepart(partition_t *part); | |
141 | ||
142 | /* Partition state flags */ | |
143 | #define FTL_FORMATTED 0x01 | |
144 | ||
145 | /* Transfer unit states */ | |
146 | #define XFER_UNKNOWN 0x00 | |
147 | #define XFER_ERASING 0x01 | |
148 | #define XFER_ERASED 0x02 | |
149 | #define XFER_PREPARED 0x03 | |
150 | #define XFER_FAILED 0x04 | |
151 | ||
152 | /*====================================================================*/ | |
153 | ||
154 | ||
155 | static void ftl_erase_callback(struct erase_info *done); | |
156 | ||
157 | ||
158 | /*====================================================================== | |
159 | ||
160 | Scan_header() checks to see if a memory region contains an FTL | |
161 | partition. build_maps() reads all the erase unit headers, builds | |
162 | the erase unit map, and then builds the virtual page map. | |
97894cda | 163 | |
1da177e4 LT |
164 | ======================================================================*/ |
165 | ||
166 | static int scan_header(partition_t *part) | |
167 | { | |
168 | erase_unit_header_t header; | |
169 | loff_t offset, max_offset; | |
170 | size_t ret; | |
171 | int err; | |
172 | part->header.FormattedSize = 0; | |
173 | max_offset = (0x100000<part->mbd.mtd->size)?0x100000:part->mbd.mtd->size; | |
174 | /* Search first megabyte for a valid FTL header */ | |
175 | for (offset = 0; | |
176 | (offset + sizeof(header)) < max_offset; | |
177 | offset += part->mbd.mtd->erasesize ? : 0x2000) { | |
178 | ||
97894cda | 179 | err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret, |
1da177e4 | 180 | (unsigned char *)&header); |
97894cda TG |
181 | |
182 | if (err) | |
1da177e4 LT |
183 | return err; |
184 | ||
185 | if (strcmp(header.DataOrgTuple+3, "FTL100") == 0) break; | |
186 | } | |
187 | ||
188 | if (offset == max_offset) { | |
189 | printk(KERN_NOTICE "ftl_cs: FTL header not found.\n"); | |
190 | return -ENOENT; | |
191 | } | |
192 | if (header.BlockSize != 9 || | |
193 | (header.EraseUnitSize < 10) || (header.EraseUnitSize > 31) || | |
194 | (header.NumTransferUnits >= le16_to_cpu(header.NumEraseUnits))) { | |
195 | printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n"); | |
196 | return -1; | |
197 | } | |
198 | if ((1 << header.EraseUnitSize) != part->mbd.mtd->erasesize) { | |
199 | printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n", | |
200 | 1 << header.EraseUnitSize,part->mbd.mtd->erasesize); | |
201 | return -1; | |
202 | } | |
203 | part->header = header; | |
204 | return 0; | |
205 | } | |
206 | ||
207 | static int build_maps(partition_t *part) | |
208 | { | |
209 | erase_unit_header_t header; | |
210 | u_int16_t xvalid, xtrans, i; | |
211 | u_int blocks, j; | |
212 | int hdr_ok, ret = -1; | |
213 | ssize_t retval; | |
214 | loff_t offset; | |
215 | ||
216 | /* Set up erase unit maps */ | |
217 | part->DataUnits = le16_to_cpu(part->header.NumEraseUnits) - | |
218 | part->header.NumTransferUnits; | |
219 | part->EUNInfo = kmalloc(part->DataUnits * sizeof(struct eun_info_t), | |
220 | GFP_KERNEL); | |
221 | if (!part->EUNInfo) | |
222 | goto out; | |
223 | for (i = 0; i < part->DataUnits; i++) | |
224 | part->EUNInfo[i].Offset = 0xffffffff; | |
225 | part->XferInfo = | |
226 | kmalloc(part->header.NumTransferUnits * sizeof(struct xfer_info_t), | |
227 | GFP_KERNEL); | |
228 | if (!part->XferInfo) | |
229 | goto out_EUNInfo; | |
230 | ||
231 | xvalid = xtrans = 0; | |
232 | for (i = 0; i < le16_to_cpu(part->header.NumEraseUnits); i++) { | |
233 | offset = ((i + le16_to_cpu(part->header.FirstPhysicalEUN)) | |
234 | << part->header.EraseUnitSize); | |
97894cda | 235 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval, |
1da177e4 | 236 | (unsigned char *)&header); |
97894cda TG |
237 | |
238 | if (ret) | |
1da177e4 LT |
239 | goto out_XferInfo; |
240 | ||
241 | ret = -1; | |
242 | /* Is this a transfer partition? */ | |
243 | hdr_ok = (strcmp(header.DataOrgTuple+3, "FTL100") == 0); | |
244 | if (hdr_ok && (le16_to_cpu(header.LogicalEUN) < part->DataUnits) && | |
245 | (part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset == 0xffffffff)) { | |
246 | part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset = offset; | |
247 | part->EUNInfo[le16_to_cpu(header.LogicalEUN)].EraseCount = | |
248 | le32_to_cpu(header.EraseCount); | |
249 | xvalid++; | |
250 | } else { | |
251 | if (xtrans == part->header.NumTransferUnits) { | |
252 | printk(KERN_NOTICE "ftl_cs: format error: too many " | |
253 | "transfer units!\n"); | |
254 | goto out_XferInfo; | |
255 | } | |
256 | if (hdr_ok && (le16_to_cpu(header.LogicalEUN) == 0xffff)) { | |
257 | part->XferInfo[xtrans].state = XFER_PREPARED; | |
258 | part->XferInfo[xtrans].EraseCount = le32_to_cpu(header.EraseCount); | |
259 | } else { | |
260 | part->XferInfo[xtrans].state = XFER_UNKNOWN; | |
261 | /* Pick anything reasonable for the erase count */ | |
262 | part->XferInfo[xtrans].EraseCount = | |
263 | le32_to_cpu(part->header.EraseCount); | |
264 | } | |
265 | part->XferInfo[xtrans].Offset = offset; | |
266 | xtrans++; | |
267 | } | |
268 | } | |
269 | /* Check for format trouble */ | |
270 | header = part->header; | |
271 | if ((xtrans != header.NumTransferUnits) || | |
272 | (xvalid+xtrans != le16_to_cpu(header.NumEraseUnits))) { | |
273 | printk(KERN_NOTICE "ftl_cs: format error: erase units " | |
274 | "don't add up!\n"); | |
275 | goto out_XferInfo; | |
276 | } | |
97894cda | 277 | |
1da177e4 LT |
278 | /* Set up virtual page map */ |
279 | blocks = le32_to_cpu(header.FormattedSize) >> header.BlockSize; | |
280 | part->VirtualBlockMap = vmalloc(blocks * sizeof(u_int32_t)); | |
281 | if (!part->VirtualBlockMap) | |
282 | goto out_XferInfo; | |
283 | ||
284 | memset(part->VirtualBlockMap, 0xff, blocks * sizeof(u_int32_t)); | |
285 | part->BlocksPerUnit = (1 << header.EraseUnitSize) >> header.BlockSize; | |
286 | ||
287 | part->bam_cache = kmalloc(part->BlocksPerUnit * sizeof(u_int32_t), | |
288 | GFP_KERNEL); | |
289 | if (!part->bam_cache) | |
290 | goto out_VirtualBlockMap; | |
291 | ||
292 | part->bam_index = 0xffff; | |
293 | part->FreeTotal = 0; | |
294 | ||
295 | for (i = 0; i < part->DataUnits; i++) { | |
296 | part->EUNInfo[i].Free = 0; | |
297 | part->EUNInfo[i].Deleted = 0; | |
298 | offset = part->EUNInfo[i].Offset + le32_to_cpu(header.BAMOffset); | |
97894cda TG |
299 | |
300 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, | |
301 | part->BlocksPerUnit * sizeof(u_int32_t), &retval, | |
1da177e4 | 302 | (unsigned char *)part->bam_cache); |
97894cda TG |
303 | |
304 | if (ret) | |
1da177e4 LT |
305 | goto out_bam_cache; |
306 | ||
307 | for (j = 0; j < part->BlocksPerUnit; j++) { | |
308 | if (BLOCK_FREE(le32_to_cpu(part->bam_cache[j]))) { | |
309 | part->EUNInfo[i].Free++; | |
310 | part->FreeTotal++; | |
311 | } else if ((BLOCK_TYPE(le32_to_cpu(part->bam_cache[j])) == BLOCK_DATA) && | |
312 | (BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j])) < blocks)) | |
313 | part->VirtualBlockMap[BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j]))] = | |
314 | (i << header.EraseUnitSize) + (j << header.BlockSize); | |
315 | else if (BLOCK_DELETED(le32_to_cpu(part->bam_cache[j]))) | |
316 | part->EUNInfo[i].Deleted++; | |
317 | } | |
318 | } | |
97894cda | 319 | |
1da177e4 LT |
320 | ret = 0; |
321 | goto out; | |
322 | ||
323 | out_bam_cache: | |
324 | kfree(part->bam_cache); | |
325 | out_VirtualBlockMap: | |
326 | vfree(part->VirtualBlockMap); | |
327 | out_XferInfo: | |
328 | kfree(part->XferInfo); | |
329 | out_EUNInfo: | |
330 | kfree(part->EUNInfo); | |
331 | out: | |
332 | return ret; | |
333 | } /* build_maps */ | |
334 | ||
335 | /*====================================================================== | |
336 | ||
337 | Erase_xfer() schedules an asynchronous erase operation for a | |
338 | transfer unit. | |
97894cda | 339 | |
1da177e4 LT |
340 | ======================================================================*/ |
341 | ||
342 | static int erase_xfer(partition_t *part, | |
343 | u_int16_t xfernum) | |
344 | { | |
345 | int ret; | |
346 | struct xfer_info_t *xfer; | |
347 | struct erase_info *erase; | |
348 | ||
349 | xfer = &part->XferInfo[xfernum]; | |
350 | DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset); | |
351 | xfer->state = XFER_ERASING; | |
352 | ||
353 | /* Is there a free erase slot? Always in MTD. */ | |
97894cda TG |
354 | |
355 | ||
1da177e4 | 356 | erase=kmalloc(sizeof(struct erase_info), GFP_KERNEL); |
97894cda | 357 | if (!erase) |
1da177e4 LT |
358 | return -ENOMEM; |
359 | ||
8ea2e06f | 360 | erase->mtd = part->mbd.mtd; |
1da177e4 LT |
361 | erase->callback = ftl_erase_callback; |
362 | erase->addr = xfer->Offset; | |
363 | erase->len = 1 << part->header.EraseUnitSize; | |
364 | erase->priv = (u_long)part; | |
97894cda | 365 | |
1da177e4 LT |
366 | ret = part->mbd.mtd->erase(part->mbd.mtd, erase); |
367 | ||
368 | if (!ret) | |
369 | xfer->EraseCount++; | |
370 | else | |
371 | kfree(erase); | |
372 | ||
373 | return ret; | |
374 | } /* erase_xfer */ | |
375 | ||
376 | /*====================================================================== | |
377 | ||
378 | Prepare_xfer() takes a freshly erased transfer unit and gives | |
379 | it an appropriate header. | |
97894cda | 380 | |
1da177e4 LT |
381 | ======================================================================*/ |
382 | ||
383 | static void ftl_erase_callback(struct erase_info *erase) | |
384 | { | |
385 | partition_t *part; | |
386 | struct xfer_info_t *xfer; | |
387 | int i; | |
97894cda | 388 | |
1da177e4 LT |
389 | /* Look up the transfer unit */ |
390 | part = (partition_t *)(erase->priv); | |
391 | ||
392 | for (i = 0; i < part->header.NumTransferUnits; i++) | |
393 | if (part->XferInfo[i].Offset == erase->addr) break; | |
394 | ||
395 | if (i == part->header.NumTransferUnits) { | |
396 | printk(KERN_NOTICE "ftl_cs: internal error: " | |
397 | "erase lookup failed!\n"); | |
398 | return; | |
399 | } | |
400 | ||
401 | xfer = &part->XferInfo[i]; | |
402 | if (erase->state == MTD_ERASE_DONE) | |
403 | xfer->state = XFER_ERASED; | |
404 | else { | |
405 | xfer->state = XFER_FAILED; | |
406 | printk(KERN_NOTICE "ftl_cs: erase failed: state = %d\n", | |
407 | erase->state); | |
408 | } | |
409 | ||
410 | kfree(erase); | |
411 | ||
412 | } /* ftl_erase_callback */ | |
413 | ||
414 | static int prepare_xfer(partition_t *part, int i) | |
415 | { | |
416 | erase_unit_header_t header; | |
417 | struct xfer_info_t *xfer; | |
418 | int nbam, ret; | |
419 | u_int32_t ctl; | |
420 | ssize_t retlen; | |
421 | loff_t offset; | |
422 | ||
423 | xfer = &part->XferInfo[i]; | |
424 | xfer->state = XFER_FAILED; | |
97894cda | 425 | |
1da177e4 LT |
426 | DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset); |
427 | ||
428 | /* Write the transfer unit header */ | |
429 | header = part->header; | |
430 | header.LogicalEUN = cpu_to_le16(0xffff); | |
431 | header.EraseCount = cpu_to_le32(xfer->EraseCount); | |
432 | ||
433 | ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset, sizeof(header), | |
434 | &retlen, (u_char *)&header); | |
435 | ||
436 | if (ret) { | |
437 | return ret; | |
438 | } | |
439 | ||
440 | /* Write the BAM stub */ | |
441 | nbam = (part->BlocksPerUnit * sizeof(u_int32_t) + | |
442 | le32_to_cpu(part->header.BAMOffset) + SECTOR_SIZE - 1) / SECTOR_SIZE; | |
443 | ||
444 | offset = xfer->Offset + le32_to_cpu(part->header.BAMOffset); | |
445 | ctl = cpu_to_le32(BLOCK_CONTROL); | |
446 | ||
447 | for (i = 0; i < nbam; i++, offset += sizeof(u_int32_t)) { | |
448 | ||
97894cda | 449 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), |
1da177e4 LT |
450 | &retlen, (u_char *)&ctl); |
451 | ||
452 | if (ret) | |
453 | return ret; | |
454 | } | |
455 | xfer->state = XFER_PREPARED; | |
456 | return 0; | |
97894cda | 457 | |
1da177e4 LT |
458 | } /* prepare_xfer */ |
459 | ||
460 | /*====================================================================== | |
461 | ||
462 | Copy_erase_unit() takes a full erase block and a transfer unit, | |
463 | copies everything to the transfer unit, then swaps the block | |
464 | pointers. | |
465 | ||
466 | All data blocks are copied to the corresponding blocks in the | |
467 | target unit, so the virtual block map does not need to be | |
468 | updated. | |
97894cda | 469 | |
1da177e4 LT |
470 | ======================================================================*/ |
471 | ||
472 | static int copy_erase_unit(partition_t *part, u_int16_t srcunit, | |
473 | u_int16_t xferunit) | |
474 | { | |
475 | u_char buf[SECTOR_SIZE]; | |
476 | struct eun_info_t *eun; | |
477 | struct xfer_info_t *xfer; | |
478 | u_int32_t src, dest, free, i; | |
479 | u_int16_t unit; | |
480 | int ret; | |
481 | ssize_t retlen; | |
482 | loff_t offset; | |
483 | u_int16_t srcunitswap = cpu_to_le16(srcunit); | |
484 | ||
485 | eun = &part->EUNInfo[srcunit]; | |
486 | xfer = &part->XferInfo[xferunit]; | |
487 | DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n", | |
488 | eun->Offset, xfer->Offset); | |
97894cda TG |
489 | |
490 | ||
1da177e4 LT |
491 | /* Read current BAM */ |
492 | if (part->bam_index != srcunit) { | |
493 | ||
494 | offset = eun->Offset + le32_to_cpu(part->header.BAMOffset); | |
495 | ||
97894cda | 496 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, |
1da177e4 LT |
497 | part->BlocksPerUnit * sizeof(u_int32_t), |
498 | &retlen, (u_char *) (part->bam_cache)); | |
499 | ||
500 | /* mark the cache bad, in case we get an error later */ | |
501 | part->bam_index = 0xffff; | |
502 | ||
503 | if (ret) { | |
97894cda | 504 | printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n"); |
1da177e4 LT |
505 | return ret; |
506 | } | |
507 | } | |
97894cda | 508 | |
1da177e4 LT |
509 | /* Write the LogicalEUN for the transfer unit */ |
510 | xfer->state = XFER_UNKNOWN; | |
511 | offset = xfer->Offset + 20; /* Bad! */ | |
512 | unit = cpu_to_le16(0x7fff); | |
513 | ||
514 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int16_t), | |
515 | &retlen, (u_char *) &unit); | |
97894cda | 516 | |
1da177e4 LT |
517 | if (ret) { |
518 | printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n"); | |
519 | return ret; | |
520 | } | |
97894cda | 521 | |
1da177e4 LT |
522 | /* Copy all data blocks from source unit to transfer unit */ |
523 | src = eun->Offset; dest = xfer->Offset; | |
524 | ||
525 | free = 0; | |
526 | ret = 0; | |
527 | for (i = 0; i < part->BlocksPerUnit; i++) { | |
528 | switch (BLOCK_TYPE(le32_to_cpu(part->bam_cache[i]))) { | |
529 | case BLOCK_CONTROL: | |
530 | /* This gets updated later */ | |
531 | break; | |
532 | case BLOCK_DATA: | |
533 | case BLOCK_REPLACEMENT: | |
534 | ret = part->mbd.mtd->read(part->mbd.mtd, src, SECTOR_SIZE, | |
535 | &retlen, (u_char *) buf); | |
536 | if (ret) { | |
537 | printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n"); | |
538 | return ret; | |
539 | } | |
540 | ||
541 | ||
542 | ret = part->mbd.mtd->write(part->mbd.mtd, dest, SECTOR_SIZE, | |
543 | &retlen, (u_char *) buf); | |
544 | if (ret) { | |
545 | printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n"); | |
546 | return ret; | |
547 | } | |
548 | ||
549 | break; | |
550 | default: | |
551 | /* All other blocks must be free */ | |
552 | part->bam_cache[i] = cpu_to_le32(0xffffffff); | |
553 | free++; | |
554 | break; | |
555 | } | |
556 | src += SECTOR_SIZE; | |
557 | dest += SECTOR_SIZE; | |
558 | } | |
559 | ||
560 | /* Write the BAM to the transfer unit */ | |
97894cda TG |
561 | ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset), |
562 | part->BlocksPerUnit * sizeof(int32_t), &retlen, | |
1da177e4 LT |
563 | (u_char *)part->bam_cache); |
564 | if (ret) { | |
565 | printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n"); | |
566 | return ret; | |
567 | } | |
568 | ||
97894cda | 569 | |
1da177e4 LT |
570 | /* All clear? Then update the LogicalEUN again */ |
571 | ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + 20, sizeof(u_int16_t), | |
572 | &retlen, (u_char *)&srcunitswap); | |
573 | ||
574 | if (ret) { | |
575 | printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n"); | |
576 | return ret; | |
97894cda TG |
577 | } |
578 | ||
579 | ||
1da177e4 LT |
580 | /* Update the maps and usage stats*/ |
581 | i = xfer->EraseCount; | |
582 | xfer->EraseCount = eun->EraseCount; | |
583 | eun->EraseCount = i; | |
584 | i = xfer->Offset; | |
585 | xfer->Offset = eun->Offset; | |
586 | eun->Offset = i; | |
587 | part->FreeTotal -= eun->Free; | |
588 | part->FreeTotal += free; | |
589 | eun->Free = free; | |
590 | eun->Deleted = 0; | |
97894cda | 591 | |
1da177e4 LT |
592 | /* Now, the cache should be valid for the new block */ |
593 | part->bam_index = srcunit; | |
97894cda | 594 | |
1da177e4 LT |
595 | return 0; |
596 | } /* copy_erase_unit */ | |
597 | ||
598 | /*====================================================================== | |
599 | ||
600 | reclaim_block() picks a full erase unit and a transfer unit and | |
601 | then calls copy_erase_unit() to copy one to the other. Then, it | |
602 | schedules an erase on the expired block. | |
603 | ||
604 | What's a good way to decide which transfer unit and which erase | |
605 | unit to use? Beats me. My way is to always pick the transfer | |
606 | unit with the fewest erases, and usually pick the data unit with | |
607 | the most deleted blocks. But with a small probability, pick the | |
608 | oldest data unit instead. This means that we generally postpone | |
609 | the next reclaimation as long as possible, but shuffle static | |
610 | stuff around a bit for wear leveling. | |
97894cda | 611 | |
1da177e4 LT |
612 | ======================================================================*/ |
613 | ||
614 | static int reclaim_block(partition_t *part) | |
615 | { | |
616 | u_int16_t i, eun, xfer; | |
617 | u_int32_t best; | |
618 | int queued, ret; | |
619 | ||
620 | DEBUG(0, "ftl_cs: reclaiming space...\n"); | |
621 | DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits); | |
622 | /* Pick the least erased transfer unit */ | |
623 | best = 0xffffffff; xfer = 0xffff; | |
624 | do { | |
625 | queued = 0; | |
626 | for (i = 0; i < part->header.NumTransferUnits; i++) { | |
627 | int n=0; | |
628 | if (part->XferInfo[i].state == XFER_UNKNOWN) { | |
629 | DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i); | |
630 | n=1; | |
631 | erase_xfer(part, i); | |
632 | } | |
633 | if (part->XferInfo[i].state == XFER_ERASING) { | |
634 | DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i); | |
635 | n=1; | |
636 | queued = 1; | |
637 | } | |
638 | else if (part->XferInfo[i].state == XFER_ERASED) { | |
639 | DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i); | |
640 | n=1; | |
641 | prepare_xfer(part, i); | |
642 | } | |
643 | if (part->XferInfo[i].state == XFER_PREPARED) { | |
644 | DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i); | |
645 | n=1; | |
646 | if (part->XferInfo[i].EraseCount <= best) { | |
647 | best = part->XferInfo[i].EraseCount; | |
648 | xfer = i; | |
649 | } | |
650 | } | |
651 | if (!n) | |
652 | DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state); | |
653 | ||
654 | } | |
655 | if (xfer == 0xffff) { | |
656 | if (queued) { | |
657 | DEBUG(1, "ftl_cs: waiting for transfer " | |
658 | "unit to be prepared...\n"); | |
659 | if (part->mbd.mtd->sync) | |
660 | part->mbd.mtd->sync(part->mbd.mtd); | |
661 | } else { | |
662 | static int ne = 0; | |
663 | if (++ne < 5) | |
664 | printk(KERN_NOTICE "ftl_cs: reclaim failed: no " | |
665 | "suitable transfer units!\n"); | |
666 | else | |
667 | DEBUG(1, "ftl_cs: reclaim failed: no " | |
668 | "suitable transfer units!\n"); | |
97894cda | 669 | |
1da177e4 LT |
670 | return -EIO; |
671 | } | |
672 | } | |
673 | } while (xfer == 0xffff); | |
674 | ||
675 | eun = 0; | |
676 | if ((jiffies % shuffle_freq) == 0) { | |
677 | DEBUG(1, "ftl_cs: recycling freshest block...\n"); | |
678 | best = 0xffffffff; | |
679 | for (i = 0; i < part->DataUnits; i++) | |
680 | if (part->EUNInfo[i].EraseCount <= best) { | |
681 | best = part->EUNInfo[i].EraseCount; | |
682 | eun = i; | |
683 | } | |
684 | } else { | |
685 | best = 0; | |
686 | for (i = 0; i < part->DataUnits; i++) | |
687 | if (part->EUNInfo[i].Deleted >= best) { | |
688 | best = part->EUNInfo[i].Deleted; | |
689 | eun = i; | |
690 | } | |
691 | if (best == 0) { | |
692 | static int ne = 0; | |
693 | if (++ne < 5) | |
694 | printk(KERN_NOTICE "ftl_cs: reclaim failed: " | |
695 | "no free blocks!\n"); | |
696 | else | |
697 | DEBUG(1,"ftl_cs: reclaim failed: " | |
698 | "no free blocks!\n"); | |
699 | ||
700 | return -EIO; | |
701 | } | |
702 | } | |
703 | ret = copy_erase_unit(part, eun, xfer); | |
704 | if (!ret) | |
705 | erase_xfer(part, xfer); | |
706 | else | |
707 | printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n"); | |
708 | return ret; | |
709 | } /* reclaim_block */ | |
710 | ||
711 | /*====================================================================== | |
712 | ||
713 | Find_free() searches for a free block. If necessary, it updates | |
714 | the BAM cache for the erase unit containing the free block. It | |
715 | returns the block index -- the erase unit is just the currently | |
716 | cached unit. If there are no free blocks, it returns 0 -- this | |
717 | is never a valid data block because it contains the header. | |
97894cda | 718 | |
1da177e4 LT |
719 | ======================================================================*/ |
720 | ||
721 | #ifdef PSYCHO_DEBUG | |
722 | static void dump_lists(partition_t *part) | |
723 | { | |
724 | int i; | |
725 | printk(KERN_DEBUG "ftl_cs: Free total = %d\n", part->FreeTotal); | |
726 | for (i = 0; i < part->DataUnits; i++) | |
727 | printk(KERN_DEBUG "ftl_cs: unit %d: %d phys, %d free, " | |
728 | "%d deleted\n", i, | |
729 | part->EUNInfo[i].Offset >> part->header.EraseUnitSize, | |
730 | part->EUNInfo[i].Free, part->EUNInfo[i].Deleted); | |
731 | } | |
732 | #endif | |
733 | ||
734 | static u_int32_t find_free(partition_t *part) | |
735 | { | |
736 | u_int16_t stop, eun; | |
737 | u_int32_t blk; | |
738 | size_t retlen; | |
739 | int ret; | |
97894cda | 740 | |
1da177e4 LT |
741 | /* Find an erase unit with some free space */ |
742 | stop = (part->bam_index == 0xffff) ? 0 : part->bam_index; | |
743 | eun = stop; | |
744 | do { | |
745 | if (part->EUNInfo[eun].Free != 0) break; | |
746 | /* Wrap around at end of table */ | |
747 | if (++eun == part->DataUnits) eun = 0; | |
748 | } while (eun != stop); | |
749 | ||
750 | if (part->EUNInfo[eun].Free == 0) | |
751 | return 0; | |
97894cda | 752 | |
1da177e4 LT |
753 | /* Is this unit's BAM cached? */ |
754 | if (eun != part->bam_index) { | |
755 | /* Invalidate cache */ | |
756 | part->bam_index = 0xffff; | |
757 | ||
97894cda | 758 | ret = part->mbd.mtd->read(part->mbd.mtd, |
1da177e4 LT |
759 | part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset), |
760 | part->BlocksPerUnit * sizeof(u_int32_t), | |
761 | &retlen, (u_char *) (part->bam_cache)); | |
97894cda | 762 | |
1da177e4 LT |
763 | if (ret) { |
764 | printk(KERN_WARNING"ftl: Error reading BAM in find_free\n"); | |
765 | return 0; | |
766 | } | |
767 | part->bam_index = eun; | |
768 | } | |
769 | ||
770 | /* Find a free block */ | |
771 | for (blk = 0; blk < part->BlocksPerUnit; blk++) | |
772 | if (BLOCK_FREE(le32_to_cpu(part->bam_cache[blk]))) break; | |
773 | if (blk == part->BlocksPerUnit) { | |
774 | #ifdef PSYCHO_DEBUG | |
775 | static int ne = 0; | |
776 | if (++ne == 1) | |
777 | dump_lists(part); | |
778 | #endif | |
779 | printk(KERN_NOTICE "ftl_cs: bad free list!\n"); | |
780 | return 0; | |
781 | } | |
782 | DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun); | |
783 | return blk; | |
97894cda | 784 | |
1da177e4 LT |
785 | } /* find_free */ |
786 | ||
787 | ||
788 | /*====================================================================== | |
789 | ||
790 | Read a series of sectors from an FTL partition. | |
97894cda | 791 | |
1da177e4 LT |
792 | ======================================================================*/ |
793 | ||
794 | static int ftl_read(partition_t *part, caddr_t buffer, | |
795 | u_long sector, u_long nblocks) | |
796 | { | |
797 | u_int32_t log_addr, bsize; | |
798 | u_long i; | |
799 | int ret; | |
800 | size_t offset, retlen; | |
97894cda | 801 | |
1da177e4 LT |
802 | DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n", |
803 | part, sector, nblocks); | |
804 | if (!(part->state & FTL_FORMATTED)) { | |
805 | printk(KERN_NOTICE "ftl_cs: bad partition\n"); | |
806 | return -EIO; | |
807 | } | |
808 | bsize = 1 << part->header.EraseUnitSize; | |
809 | ||
810 | for (i = 0; i < nblocks; i++) { | |
811 | if (((sector+i) * SECTOR_SIZE) >= le32_to_cpu(part->header.FormattedSize)) { | |
812 | printk(KERN_NOTICE "ftl_cs: bad read offset\n"); | |
813 | return -EIO; | |
814 | } | |
815 | log_addr = part->VirtualBlockMap[sector+i]; | |
816 | if (log_addr == 0xffffffff) | |
817 | memset(buffer, 0, SECTOR_SIZE); | |
818 | else { | |
819 | offset = (part->EUNInfo[log_addr / bsize].Offset | |
820 | + (log_addr % bsize)); | |
821 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, SECTOR_SIZE, | |
822 | &retlen, (u_char *) buffer); | |
823 | ||
824 | if (ret) { | |
825 | printk(KERN_WARNING "Error reading MTD device in ftl_read()\n"); | |
826 | return ret; | |
827 | } | |
828 | } | |
829 | buffer += SECTOR_SIZE; | |
830 | } | |
831 | return 0; | |
832 | } /* ftl_read */ | |
833 | ||
834 | /*====================================================================== | |
835 | ||
836 | Write a series of sectors to an FTL partition | |
97894cda | 837 | |
1da177e4 LT |
838 | ======================================================================*/ |
839 | ||
840 | static int set_bam_entry(partition_t *part, u_int32_t log_addr, | |
841 | u_int32_t virt_addr) | |
842 | { | |
843 | u_int32_t bsize, blk, le_virt_addr; | |
844 | #ifdef PSYCHO_DEBUG | |
845 | u_int32_t old_addr; | |
846 | #endif | |
847 | u_int16_t eun; | |
848 | int ret; | |
849 | size_t retlen, offset; | |
850 | ||
851 | DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n", | |
852 | part, log_addr, virt_addr); | |
853 | bsize = 1 << part->header.EraseUnitSize; | |
854 | eun = log_addr / bsize; | |
855 | blk = (log_addr % bsize) / SECTOR_SIZE; | |
856 | offset = (part->EUNInfo[eun].Offset + blk * sizeof(u_int32_t) + | |
857 | le32_to_cpu(part->header.BAMOffset)); | |
97894cda | 858 | |
1da177e4 LT |
859 | #ifdef PSYCHO_DEBUG |
860 | ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(u_int32_t), | |
861 | &retlen, (u_char *)&old_addr); | |
862 | if (ret) { | |
863 | printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret); | |
864 | return ret; | |
865 | } | |
866 | old_addr = le32_to_cpu(old_addr); | |
867 | ||
868 | if (((virt_addr == 0xfffffffe) && !BLOCK_FREE(old_addr)) || | |
869 | ((virt_addr == 0) && (BLOCK_TYPE(old_addr) != BLOCK_DATA)) || | |
870 | (!BLOCK_DELETED(virt_addr) && (old_addr != 0xfffffffe))) { | |
871 | static int ne = 0; | |
872 | if (++ne < 5) { | |
873 | printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n"); | |
874 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, old = 0x%x" | |
875 | ", new = 0x%x\n", log_addr, old_addr, virt_addr); | |
876 | } | |
877 | return -EIO; | |
878 | } | |
879 | #endif | |
880 | le_virt_addr = cpu_to_le32(virt_addr); | |
881 | if (part->bam_index == eun) { | |
882 | #ifdef PSYCHO_DEBUG | |
883 | if (le32_to_cpu(part->bam_cache[blk]) != old_addr) { | |
884 | static int ne = 0; | |
885 | if (++ne < 5) { | |
886 | printk(KERN_NOTICE "ftl_cs: set_bam_entry() " | |
887 | "inconsistency!\n"); | |
888 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, cache" | |
889 | " = 0x%x\n", | |
890 | le32_to_cpu(part->bam_cache[blk]), old_addr); | |
891 | } | |
892 | return -EIO; | |
893 | } | |
894 | #endif | |
895 | part->bam_cache[blk] = le_virt_addr; | |
896 | } | |
897 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), | |
898 | &retlen, (u_char *)&le_virt_addr); | |
899 | ||
900 | if (ret) { | |
901 | printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n"); | |
902 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, new = 0x%x\n", | |
903 | log_addr, virt_addr); | |
904 | } | |
905 | return ret; | |
906 | } /* set_bam_entry */ | |
907 | ||
908 | static int ftl_write(partition_t *part, caddr_t buffer, | |
909 | u_long sector, u_long nblocks) | |
910 | { | |
911 | u_int32_t bsize, log_addr, virt_addr, old_addr, blk; | |
912 | u_long i; | |
913 | int ret; | |
914 | size_t retlen, offset; | |
915 | ||
916 | DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n", | |
917 | part, sector, nblocks); | |
918 | if (!(part->state & FTL_FORMATTED)) { | |
919 | printk(KERN_NOTICE "ftl_cs: bad partition\n"); | |
920 | return -EIO; | |
921 | } | |
922 | /* See if we need to reclaim space, before we start */ | |
923 | while (part->FreeTotal < nblocks) { | |
924 | ret = reclaim_block(part); | |
925 | if (ret) | |
926 | return ret; | |
927 | } | |
97894cda | 928 | |
1da177e4 LT |
929 | bsize = 1 << part->header.EraseUnitSize; |
930 | ||
931 | virt_addr = sector * SECTOR_SIZE | BLOCK_DATA; | |
932 | for (i = 0; i < nblocks; i++) { | |
933 | if (virt_addr >= le32_to_cpu(part->header.FormattedSize)) { | |
934 | printk(KERN_NOTICE "ftl_cs: bad write offset\n"); | |
935 | return -EIO; | |
936 | } | |
937 | ||
938 | /* Grab a free block */ | |
939 | blk = find_free(part); | |
940 | if (blk == 0) { | |
941 | static int ne = 0; | |
942 | if (++ne < 5) | |
943 | printk(KERN_NOTICE "ftl_cs: internal error: " | |
944 | "no free blocks!\n"); | |
945 | return -ENOSPC; | |
946 | } | |
947 | ||
948 | /* Tag the BAM entry, and write the new block */ | |
949 | log_addr = part->bam_index * bsize + blk * SECTOR_SIZE; | |
950 | part->EUNInfo[part->bam_index].Free--; | |
951 | part->FreeTotal--; | |
97894cda | 952 | if (set_bam_entry(part, log_addr, 0xfffffffe)) |
1da177e4 LT |
953 | return -EIO; |
954 | part->EUNInfo[part->bam_index].Deleted++; | |
955 | offset = (part->EUNInfo[part->bam_index].Offset + | |
956 | blk * SECTOR_SIZE); | |
97894cda | 957 | ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen, |
1da177e4 LT |
958 | buffer); |
959 | ||
960 | if (ret) { | |
961 | printk(KERN_NOTICE "ftl_cs: block write failed!\n"); | |
962 | printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, virt_addr" | |
963 | " = 0x%x, Offset = 0x%zx\n", log_addr, virt_addr, | |
964 | offset); | |
965 | return -EIO; | |
966 | } | |
97894cda | 967 | |
1da177e4 LT |
968 | /* Only delete the old entry when the new entry is ready */ |
969 | old_addr = part->VirtualBlockMap[sector+i]; | |
970 | if (old_addr != 0xffffffff) { | |
971 | part->VirtualBlockMap[sector+i] = 0xffffffff; | |
972 | part->EUNInfo[old_addr/bsize].Deleted++; | |
973 | if (set_bam_entry(part, old_addr, 0)) | |
974 | return -EIO; | |
975 | } | |
976 | ||
977 | /* Finally, set up the new pointers */ | |
978 | if (set_bam_entry(part, log_addr, virt_addr)) | |
979 | return -EIO; | |
980 | part->VirtualBlockMap[sector+i] = log_addr; | |
981 | part->EUNInfo[part->bam_index].Deleted--; | |
97894cda | 982 | |
1da177e4 LT |
983 | buffer += SECTOR_SIZE; |
984 | virt_addr += SECTOR_SIZE; | |
985 | } | |
986 | return 0; | |
987 | } /* ftl_write */ | |
988 | ||
989 | static int ftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo) | |
990 | { | |
991 | partition_t *part = (void *)dev; | |
992 | u_long sect; | |
993 | ||
994 | /* Sort of arbitrary: round size down to 4KiB boundary */ | |
995 | sect = le32_to_cpu(part->header.FormattedSize)/SECTOR_SIZE; | |
996 | ||
997 | geo->heads = 1; | |
998 | geo->sectors = 8; | |
999 | geo->cylinders = sect >> 3; | |
1000 | ||
1001 | return 0; | |
1002 | } | |
1003 | ||
1004 | static int ftl_readsect(struct mtd_blktrans_dev *dev, | |
1005 | unsigned long block, char *buf) | |
1006 | { | |
1007 | return ftl_read((void *)dev, buf, block, 1); | |
1008 | } | |
1009 | ||
1010 | static int ftl_writesect(struct mtd_blktrans_dev *dev, | |
1011 | unsigned long block, char *buf) | |
1012 | { | |
1013 | return ftl_write((void *)dev, buf, block, 1); | |
1014 | } | |
1015 | ||
1016 | /*====================================================================*/ | |
1017 | ||
1018 | void ftl_freepart(partition_t *part) | |
1019 | { | |
1da177e4 LT |
1020 | vfree(part->VirtualBlockMap); |
1021 | part->VirtualBlockMap = NULL; | |
1da177e4 LT |
1022 | kfree(part->VirtualPageMap); |
1023 | part->VirtualPageMap = NULL; | |
1da177e4 LT |
1024 | kfree(part->EUNInfo); |
1025 | part->EUNInfo = NULL; | |
1da177e4 LT |
1026 | kfree(part->XferInfo); |
1027 | part->XferInfo = NULL; | |
1da177e4 LT |
1028 | kfree(part->bam_cache); |
1029 | part->bam_cache = NULL; | |
1da177e4 LT |
1030 | } /* ftl_freepart */ |
1031 | ||
1032 | static void ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) | |
1033 | { | |
1034 | partition_t *partition; | |
1035 | ||
1036 | partition = kmalloc(sizeof(partition_t), GFP_KERNEL); | |
97894cda | 1037 | |
1da177e4 LT |
1038 | if (!partition) { |
1039 | printk(KERN_WARNING "No memory to scan for FTL on %s\n", | |
1040 | mtd->name); | |
1041 | return; | |
97894cda | 1042 | } |
1da177e4 LT |
1043 | |
1044 | memset(partition, 0, sizeof(partition_t)); | |
1045 | ||
1046 | partition->mbd.mtd = mtd; | |
1047 | ||
97894cda | 1048 | if ((scan_header(partition) == 0) && |
1da177e4 | 1049 | (build_maps(partition) == 0)) { |
97894cda | 1050 | |
1da177e4 LT |
1051 | partition->state = FTL_FORMATTED; |
1052 | #ifdef PCMCIA_DEBUG | |
1053 | printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n", | |
1054 | le32_to_cpu(partition->header.FormattedSize) >> 10); | |
1055 | #endif | |
1056 | partition->mbd.size = le32_to_cpu(partition->header.FormattedSize) >> 9; | |
1057 | partition->mbd.blksize = SECTOR_SIZE; | |
1058 | partition->mbd.tr = tr; | |
1059 | partition->mbd.devnum = -1; | |
1060 | if (!add_mtd_blktrans_dev((void *)partition)) | |
1061 | return; | |
1062 | } | |
1063 | ||
1064 | ftl_freepart(partition); | |
1065 | kfree(partition); | |
1066 | } | |
1067 | ||
1068 | static void ftl_remove_dev(struct mtd_blktrans_dev *dev) | |
1069 | { | |
1070 | del_mtd_blktrans_dev(dev); | |
1071 | ftl_freepart((partition_t *)dev); | |
1072 | kfree(dev); | |
1073 | } | |
1074 | ||
1075 | struct mtd_blktrans_ops ftl_tr = { | |
1076 | .name = "ftl", | |
1077 | .major = FTL_MAJOR, | |
1078 | .part_bits = PART_BITS, | |
1079 | .readsect = ftl_readsect, | |
1080 | .writesect = ftl_writesect, | |
1081 | .getgeo = ftl_getgeo, | |
1082 | .add_mtd = ftl_add_mtd, | |
1083 | .remove_dev = ftl_remove_dev, | |
1084 | .owner = THIS_MODULE, | |
1085 | }; | |
1086 | ||
2b9175c1 | 1087 | static int init_ftl(void) |
1da177e4 | 1088 | { |
2b9175c1 | 1089 | DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n"); |
1da177e4 LT |
1090 | |
1091 | return register_mtd_blktrans(&ftl_tr); | |
1092 | } | |
1093 | ||
1094 | static void __exit cleanup_ftl(void) | |
1095 | { | |
1096 | deregister_mtd_blktrans(&ftl_tr); | |
1097 | } | |
1098 | ||
1099 | module_init(init_ftl); | |
1100 | module_exit(cleanup_ftl); | |
1101 | ||
1102 | ||
1103 | MODULE_LICENSE("Dual MPL/GPL"); | |
1104 | MODULE_AUTHOR("David Hinds <[email protected]>"); | |
1105 | MODULE_DESCRIPTION("Support code for Flash Translation Layer, used on PCMCIA devices"); |